cxl: Delay HB port and switch dport probing until endpoint dev probe
Dave Jiang
maintainerv6 cover cxl: Delay HB port and switch dport probing until endpoint dev probe
v6:
- Return -EEXIST when a dport already exists. (Jonathan)
- Fix checking wrong port for NULL. (Ming)
- Check host_bridge and call devm_cxl_add_dport_by_uport() directly vs add_port_attach_ep(). (Ming)
- Set dport to NULL during declaration. (Jonathan)
v5:
- Return dport instead of errno with dport pointer as output param. (Jonathan)
- Consolidate common code in cxl_test. (Jonathan)
- Rename cxl_port_get_total_dports() to cxl_port_update_total_dports(). (Jonathan)
v4:
- Push dport allocation to when they are discovered. (Robert)
- Drop linux id for dport with above changes.
v3:
- Main changes revolve around improving naming of hostbridge uport and dport (Gregory)
- See specific patches for detailed change log
This series attempts to delay the allocation of dports until when the endpoint device (memdev) are being probed. At this point, the CXL link is established and all the devices along the CXL link path up to the Root Port (RP) should be active.
And hopefully this help a bit with Robert's issue raised in the "Inactive downstream port handling" series [1]. Testing would be appreicated. Thank you!
[1]: https://lore.kernel.org/linux-cxl/[email protected]/
Dave Jiang (10):
cxl/region: Add decoder check to check_commit_order()
cxl: Add helper to detect top of CXL device topology
cxl: Add helper to reap dport
cxl: Defer dport allocation for switch ports
cxl/test: Add cxl_test support for cxl_port_update_total_ports() cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
cxl: Change sslbis handler to only handle single dport
cxl: Create an xarray to tie a host bridge to the cxl_root
cxl: Move enumeration of hostbridge ports to the memdev probe path
cxl: Remove devm_cxl_port_enumerate_dports() that is no longer used
drivers/cxl/acpi.c | 137 ++++++---- drivers/cxl/core/cdat.c | 23 +- drivers/cxl/core/pci.c | 146 ++++++----- drivers/cxl/core/port.c | 359 +++++++++++++++++++++++++-- drivers/cxl/core/region.c | 7 +- drivers/cxl/cxl.h | 32 ++- drivers/cxl/cxlpci.h | 1 - drivers/cxl/port.c | 8 +- tools/testing/cxl/Kbuild | 3 +- tools/testing/cxl/cxl_core_exports.c | 12 + tools/testing/cxl/exports.h | 10 + tools/testing/cxl/test/cxl.c | 67 ++++- tools/testing/cxl/test/mock.c | 31 ++- tools/testing/cxl/test/mock.h | 4 +- 14 files changed, 659 insertions(+), 181 deletions(-) create mode 100644 tools/testing/cxl/exports.h
base-commit: 9c5718dca6390711ddebce75ab298f81e3d0e058
Signature · 1 line
2.50.0
Dave Jiang
maintainerPATCH v6 1/10 cxl/region: Add decoder check to check_commit_order()
check_commit_order() attempts to convert a device to a decoder without making sure the device is a decoder. So far this has been working due to pure luck. Issue discovered while doing deferred dport probing when child ports are now in the midst of decoders due to ordering change of child port additions. Add a check before attempting to do decoder conversion.
--- drivers/cxl/core/region.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
drivers/cxl/core/region.c +6 -1
@@ -787,7 +787,12 @@ static size_t show_targetN(struct cxl_region *cxlr, char *buf, int pos)static int check_commit_order (struct device *dev,void *data) { -struct cxl_decoder *cxld =to_cxl_decoder (dev); +struct cxl_decoder *cxld; + +if (!is_switch_decoder (dev)) +return 0 ; + + cxld =to_cxl_decoder (dev);/* * if port->commit_end is not the only free decoder, then out of
Signature · 1 line
2.50.0
Dave Jiang
maintainerPATCH v6 2/10 cxl: Add helper to detect top of CXL device topology
In reply to Dave JiangAdd a helper to replace the open code detection of CXL device hierarchy root. The helper will be used for delayed hostbridge port creation later on.
--- drivers/cxl/core/port.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
drivers/cxl/core/port.c +10 -5
@@ -39,6 +39,15 @@ DECLARE_RWSEM(cxl_region_rwsem);static DEFINE_IDA (cxl_port_ida);static DEFINE_XARRAY (cxl_root_buses); +/* +* The terminal device in PCI is NULL and @platform_bus +* for platform devices (for cxl_test) +*/ +static bool is_cxl_hierarchy_head (struct device *dev) +{ +return (!dev || dev == &platform_bus); +} +int cxl_num_decoders_committed (struct cxl_port *port) {lockdep_assert_held (&cxl_region_rwsem);
@@ -1635,11 +1644,7 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)struct device *uport_dev;struct cxl_dport *dport; -/* -* The terminal "grandparent" in PCI is NULL and @platform_bus -* for platform devices -*/ -if (!dport_dev || dport_dev == &platform_bus) +if (is_cxl_hierarchy_head (dport_dev))return 0 ; uport_dev = dport_dev->parent;
Signature · 1 line
2.50.0
Dave Jiang
maintainerPATCH v6 3/10 cxl: Add helper to reap dport
In reply to Dave JiangRefactor the code in reap_dports() out to provide a helper function that reaps a single dport. This will be used later in the cleanup path for allocating a dport.
--- drivers/cxl/core/port.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
drivers/cxl/core/port.c +9 -5
@@ -1447,6 +1447,13 @@ static void delete_switch_port(struct cxl_port *port)devm_release_action (port->dev.parent, unregister_port, port); } +static void reap_dport (struct cxl_port *port,struct cxl_dport *dport) +{ +devm_release_action (&port->dev, cxl_dport_unlink, dport); +devm_release_action (&port->dev, cxl_dport_remove, dport); +devm_kfree (&port->dev, dport); +} +static void reap_dports (struct cxl_port *port) {struct cxl_dport *dport;
@@ -1454,11 +1461,8 @@ static void reap_dports(struct cxl_port *port)device_lock_assert (&port->dev); -xa_for_each (&port->dports, index, dport) { -devm_release_action (&port->dev, cxl_dport_unlink, dport); -devm_release_action (&port->dev, cxl_dport_remove, dport); -devm_kfree (&port->dev, dport); - } +xa_for_each (&port->dports, index, dport) +reap_dport (port, dport); }struct detach_ctx {
Signature · 1 line
2.50.0
Re: [PATCH v6 03/10] cxl: Add helper to reap dport
Quoted 6 lines · Dave Jiang
Refactor the code in
reap_dports()out to provide a helper function that reaps a single dport. This will be used later in the cleanup path for allocating a dport.Reviewed-by Jonathan Cameron <[email protected]>Signed-off-by Dave Jiang <[email protected]>
Quoted 36 lines
--- drivers/cxl/core/port.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)drivers/cxl/core/port.c +9
-5@@ -1447,6 +1447,13 @@ static void delete_switch_port(struct cxl_port *port)devm_release_action (port->dev.parent, unregister_port, port); } +static void reap_dport (struct cxl_port *port,struct cxl_dport *dport) +{ +devm_release_action (&port->dev, cxl_dport_unlink, dport); +devm_release_action (&port->dev, cxl_dport_remove, dport); +devm_kfree (&port->dev, dport); +} +static void reap_dports (struct cxl_port *port) {struct cxl_dport *dport;@@ -1454,11 +1461,8 @@ static void reap_dports(struct cxl_port *port)device_lock_assert (&port->dev); -xa_for_each (&port->dports, index, dport) { -devm_release_action (&port->dev, cxl_dport_unlink, dport); -devm_release_action (&port->dev, cxl_dport_remove, dport); -devm_kfree (&port->dev, dport); - } +xa_for_each (&port->dports, index, dport) +reap_dport (port, dport); }struct detach_ctx {
Dave Jiang
maintainerPATCH v6 4/10 cxl: Defer dport allocation for switch ports
In reply to Dave JiangThe current implementation enumerates the dports during the cxl_port driver probe. Without an endpoint connected, the dport may not be active during port probe. This scheme may prevent a valid hardware dport id to be retrieved and MMIO registers to be read when an endpoint is hot-plugged. Move the dport allocation and setup to behind memdev probe so the endpoint is guaranteed to be connected.
In the original enumeration behavior, there are 3 phases (or 2 if no CXL switches) for port creation. cxl_acpi() creates a Root Port (RP) from the ACPI0017.N device. Through that it enumerate downstream ports composed of ACPI0016.N devices through add_host_bridge_dport(). Once done, it use add_host_bridge_uport() to create the ports that enumerates the PCI RPs as the dports of these ports. Every time a port is created, the port driver is attached and drv->probe() is called and devm_cxl_port_enumerate_dports() is envoked to enumerate and probe the dports.
The second phase is if there are any CXL switches. When the pci endpoint device driver (cxl_pci) calls probe, it will add a mem device and triggers the cxl_mem->probe(). cxl_mem->probe() calls devm_cxl_enumerate_ports() and attempts to discovery and create all the ports represent CXL switches. During this phase, a port is created per switch and the attached dports are also enumerated and probed.
The last phase is creating endpoint port which happens for all endpoint devices.
In this commit, the port create and its dport probing in cxl_acpi is not changed. That will be handled in a different patch later on. The behavior change is only for CXL switch ports. Only the dport that is part of the path for an endpoint device to the RP will be probed. This happens naturally by the code walking up the device hierarchy and identifying the upstream device and the downstream device.
There are two points where the interception of dport creation happens during the devm_cxl_enumerate_ports() path. The first location is right before the function calls add_port_attach_ep() where it does the dport allocation for the RP. Once the dport is allocated, the iteration path is reset to the beginning to try again. The second location happens in add_port_attach_ep() after the location where either the port is discovered or allocated new if it does not exist.
Locking of port device during __cxl_port_add_dport() protects modifications against the port and its dports while multiple endpoints can be probing at the same time and the same port is being modified concurrently.
While the decoders are allocated during the port driver probe, The decoders must also be updated since previously it's all done when all the dports are setup and now every time a dport is setup per endpoint, the switch target listing need to be updated with new dport. A guard(rwsem_write) is used to update decoder targets. This is similar to when decoder_populate_target() is called and the decoder programming must be protected.
---
v6:
- Return -EEXIST when dport is already established. (Jonathan)
- Check !pport instead of !port. (Ming)
- branch devm_cxl_add_dport_by_uport() vs add_port_attach_ep(). (Ming)
--- drivers/cxl/core/core.h | 2 + drivers/cxl/core/pci.c | 88 ++++++++++++++++++ drivers/cxl/core/port.c | 193 ++++++++++++++++++++++++++++++++++++---- drivers/cxl/cxl.h | 5 ++ drivers/cxl/port.c | 8 +- 5 files changed, 275 insertions(+), 21 deletions(-)
drivers/cxl/core/core.h +2 -0
@@ -122,6 +122,8 @@ void cxl_ras_exit(void);int cxl_gpf_port_setup (struct cxl_dport *dport);int cxl_acpi_get_extended_linear_cache_size (struct resource *backing_res,int nid,resource_size_t *size); +struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev);#ifdef CONFIG_CXL_FEATURES struct cxl_feat_entry *
drivers/cxl/core/pci.c +88 -0
97 lines not on this page · raw message
drivers/cxl/core/port.c +177 -16
256 lines not on this page · raw message
drivers/cxl/cxl.h +5 -0
@@ -403,6 +403,7 @@ struct cxl_endpoint_decoder {* struct cxl_switch_decoder - Switch specific CXL HDM Decoder * @cxld: base cxl_decoder object * @nr_targets: number of elements in @target +* @target_map: map of target dport ids to interleave positions * @target: active ordered target list in current decoder configuration * * The 'switch' decoder type represents the decoder instances of cxl_port's that
@@ -414,6 +415,7 @@ struct cxl_endpoint_decoder {struct cxl_switch_decoder {struct cxl_decoder cxld;int nr_targets; +int target_map[CXL_DECODER_MAX_INTERLEAVE ];struct cxl_dport *target[]; };
@@ -584,6 +586,7 @@ struct cxl_dax_region {* @parent_dport: dport that points to this port in the parent * @decoder_ida: allocator for decoder ids * @reg_map: component and ras register mapping parameters +* @total_dports: total possible dports in this port * @nr_dports: number of entries in @dports * @hdm_end: track last allocated HDM decoder instance for allocation ordering * @commit_end: cursor to track highest committed decoder for commit ordering
@@ -604,6 +607,7 @@ struct cxl_port {struct cxl_dport *parent_dport;struct ida decoder_ida;struct cxl_register_map reg_map; +int total_dports;int nr_dports;int hdm_end;int commit_end;
@@ -902,6 +906,7 @@ void cxl_coordinates_combine(struct access_coordinate *out, struct access_coordinate *c2);bool cxl_endpoint_decoder_reset_detected (struct cxl_port *port); +int cxl_port_update_total_dports (struct cxl_port *port);/* * Unit test builds overrides this to __weak, find the 'strong' version
drivers/cxl/port.c +3 -5
@@ -65,12 +65,10 @@ static int cxl_switch_port_probe(struct cxl_port *port)/* Cache the data early to ensure is_visible() works */ read_cdat_data (port); - rc =devm_cxl_port_enumerate_dports (port); -if (rc <0 ) + rc =cxl_port_update_total_dports (port); +if (rc)return rc; -cxl_switch_parse_cdat (port); - cxlhdm =devm_cxl_setup_hdm (port,NULL );if (!IS_ERR (cxlhdm))return devm_cxl_enumerate_decoders (cxlhdm,NULL );
@@ -80,7 +78,7 @@ static int cxl_switch_port_probe(struct cxl_port *port)return PTR_ERR (cxlhdm); } -if (rc ==1 ) { +if (port->total_dports ==1 ) {dev_dbg (&port->dev,"Fallback to passthrough decoder\n" );return devm_cxl_add_passthrough_decoder (port); }
Signature · 1 line
2.50.0
Li Ming
reviewerRe: [PATCH v6 04/10] cxl: Defer dport allocation for switch ports
Quoted 267 lines · Dave Jiang
The current implementation enumerates the dports during the
cxl_portdriver probe. Without an endpoint connected, the dport may not be active during port probe. This scheme may prevent a valid hardware dport id to be retrieved and MMIO registers to be read when an endpoint is hot-plugged. Move the dport allocation and setup to behind memdev probe so the endpoint is guaranteed to be connected.In the original enumeration behavior, there are 3 phases (or 2 if no CXL switches) for port creation.
cxl_acpi()creates a Root Port (RP) from the ACPI0017.N device. Through that it enumerate downstream ports composed of ACPI0016.N devices throughadd_host_bridge_dport(). Once done, it useadd_host_bridge_uport()to create the ports that enumerates the PCI RPs as the dports of these ports. Every time a port is created, the port driver is attached anddrv->probe()is called anddevm_cxl_port_enumerate_dports()is envoked to enumerate and probe the dports.The second phase is if there are any CXL switches. When the pci endpoint device driver (
cxl_pci) calls probe, it will add a mem device and triggers thecxl_mem->probe().cxl_mem->probe()callsdevm_cxl_enumerate_ports()and attempts to discovery and create all the ports represent CXL switches. During this phase, a port is created per switch and the attached dports are also enumerated and probed.The last phase is creating endpoint port which happens for all endpoint devices.
In this commit, the port create and its dport probing in
cxl_acpiis not changed. That will be handled in a different patch later on. The behavior change is only for CXL switch ports. Only the dport that is part of the path for an endpoint device to the RP will be probed. This happens naturally by the code walking up the device hierarchy and identifying the upstream device and the downstream device.There are two points where the interception of dport creation happens during the
devm_cxl_enumerate_ports()path. The first location is right before the function callsadd_port_attach_ep()where it does the dport allocation for the RP. Once the dport is allocated, the iteration path is reset to the beginning to try again. The second location happens inadd_port_attach_ep()after the location where either the port is discovered or allocated new if it does not exist.Locking of port device during
__cxl_port_add_dport()protects modifications against the port and its dports while multiple endpoints can be probing at the same time and the same port is being modified concurrently.While the decoders are allocated during the port driver probe, The decoders must also be updated since previously it's all done when all the dports are setup and now every time a dport is setup per endpoint, the switch target listing need to be updated with new dport. A
guard(rwsem_write)is used to update decoder targets. This is similar to whendecoder_populate_target()is called and the decoder programming must be protected.Reviewed-by Jonathan Cameron <[email protected]>Signed-off-by Dave Jiang <[email protected]>---
v6:
- Return-EEXISTwhen dport is already established. (Jonathan)
- Check !pport instead of !port. (Ming)
- branchdevm_cxl_add_dport_by_uport()vsadd_port_attach_ep(). (Ming)--- drivers/cxl/core/core.h | 2 + drivers/cxl/core/pci.c | 88 ++++++++++++++++++ drivers/cxl/core/port.c | 193 ++++++++++++++++++++++++++++++++++++---- drivers/cxl/cxl.h | 5 ++ drivers/cxl/port.c | 8 +- 5 files changed, 275 insertions(+), 21 deletions(-)drivers/cxl/core/core.h +2
-0@@ -122,6 +122,8 @@ void cxl_ras_exit(void);int cxl_gpf_port_setup (struct cxl_dport *dport);int cxl_acpi_get_extended_linear_cache_size (struct resource *backing_res,int nid,resource_size_t *size); +struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev);#ifdef CONFIG_CXL_FEATURES struct cxl_feat_entry *drivers/cxl/core/pci.c +88
-0@@ -24,6 +24,44 @@ static unsigned short media_ready_timeout = 60;module_param (media_ready_timeout, ushort,0644 );MODULE_PARM_DESC (media_ready_timeout,"seconds to wait for media ready" ); +/** +* devm_cxl_add_dport_by_dev - allocate a dport by dport device +* @port: cxl_port that hosts the dport +* @dport_dev: 'struct device' of the dport +* +* Returns the allocate dport on success or ERR_PTR() of -errno on error +*/ +struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev) +{ +struct cxl_register_map map; +struct pci_dev *pdev; +u32 lnkcap, port_num; +int type; +int rc; + +if (!dev_is_pci (dport_dev)) +return ERR_PTR (-EINVAL ); + +device_lock_assert (&port->dev); + + pdev =to_pci_dev (dport_dev); + type =pci_pcie_type (pdev); +if (type !=PCI_EXP_TYPE_DOWNSTREAM && type !=PCI_EXP_TYPE_ROOT_PORT ) +return ERR_PTR (-EINVAL ); + +if (pci_read_config_dword (pdev,pci_pcie_cap (pdev) +PCI_EXP_LNKCAP , + &lnkcap)) +return ERR_PTR (-ENXIO ); + + rc =cxl_find_regblock (pdev,CXL_REGLOC_RBI_COMPONENT , &map); +if (rc) +dev_dbg (&port->dev,"failed to find component registers\n" ); + + port_num =FIELD_GET (PCI_EXP_LNKCAP_PN , lnkcap); +return devm_cxl_add_dport (port, &pdev->dev, port_num, map.resource); +} +struct cxl_walk_context {struct pci_bus *bus;struct cxl_port *port;@@ -1169,3 +1207,53 @@ int cxl_gpf_port_setup(struct cxl_dport *dport)return 0 ; } + +static int match_dport (struct pci_dev *pdev,void *data) +{ +struct cxl_walk_context *ctx = data; +int type =pci_pcie_type (pdev); + +if (pdev->bus != ctx->bus) +return 0 ; +if (!pci_is_pcie (pdev)) +return 0 ; +if (type != ctx->type) +return 0 ; + + ctx->count++; +return 0 ; +} + +int cxl_port_update_total_dports (struct cxl_port *port) +{ +struct pci_bus *bus =cxl_port_to_pci_bus (port); +struct cxl_walk_context ctx; +int type; + +if (!bus) { +dev_err (&port->dev,"No PCI bus found for port %s\n" , +dev_name (&port->dev)); +return -ENXIO ; + } + +if (pci_is_root_bus (bus)) + type =PCI_EXP_TYPE_ROOT_PORT ; +else + type =PCI_EXP_TYPE_DOWNSTREAM ; + + ctx = (struct cxl_walk_context ) { + .bus = bus, + .type = type, + }; +pci_walk_bus (bus, match_dport, &ctx); + + port->total_dports = ctx.count; +if (port->total_dports ==0 ) { +dev_warn (&port->dev,"No dports found for port %s on bus %s\n" , +dev_name (&port->dev), bus->name); +return -ENXIO ; + } + +return 0 ; +} +EXPORT_SYMBOL_NS_GPL (cxl_port_update_total_dports,"CXL" );drivers/cxl/core/port.c +73
-0@@ -1551,6 +1551,116 @@ static resource_size_t find_component_registers(struct device *dev)return map.resource; } +static int match_port_by_uport (struct device *dev,const void *data) +{ +const struct device *uport_dev = data; +struct cxl_port *port; + +if (!is_cxl_port (dev)) +return 0 ; + + port =to_cxl_port (dev); +return uport_dev == port->uport_dev; +} + +/* +* Function takes a device reference on the port device. Caller should do a +* put_device() when done. +*/ +static struct cxl_port *find_cxl_port_by_uport (struct device *uport_dev) +{ +struct device *dev; + + dev =bus_find_device (&cxl_bus_type,NULL , uport_dev, match_port_by_uport); +if (dev) +return to_cxl_port (dev); +return NULL ; +} + +static int update_switch_decoder (struct device *dev,void *data) +{ +struct cxl_dport *dport = data; +struct cxl_switch_decoder *cxlsd; +struct cxl_decoder *cxld; +int i; + +if (!is_switch_decoder (dev)) +return 0 ; + + cxlsd =to_cxl_switch_decoder (dev); + cxld = &cxlsd->cxld; +guard (rwsem_write)(&cxl_region_rwsem); +for (i =0 ; i < cxld->interleave_ways; i++) { +if (cxlsd->target_map[i] == dport->port_id) { + cxlsd->target[i] = dport; +return 0 ; + } + } + +dev_dbg (dev,"Updating decoder target_map with %s and none found\n" , +dev_name (dport->dport_dev)); + +return 0 ; +} + +static int update_decoders_with_dport (struct cxl_port *port,struct cxl_dport *dport) +{ +device_lock_assert (&port->dev); +return device_for_each_child (&port->dev, dport, update_switch_decoder); +} + +static int cxl_port_setup_with_dport (struct cxl_port *port, +struct cxl_dport *dport) +{ +device_lock_assert (&port->dev); + +cxl_switch_parse_cdat (port); + +return update_decoders_with_dport (port, dport); +} + +static struct cxl_dport *devm_cxl_port_add_dport (struct cxl_port *port, +struct device *dport_dev) +{ +struct cxl_dport *dport; +int rc;
drivers/cxl/core/port.c static resource_size_t find_component_registers(struct device *dev) · line 1636
Quoted 10 lines
drivers/cxl/core/port.c +10
-0+ +device_lock_assert (&port->dev); + +/* Port driver not attached yet, wait for cxl_acpi reprobe */ +if (!port->dev.driver) +return ERR_PTR (-ENODEV ); + + dport =cxl_find_dport_by_dev (port, dport_dev); +if (dport) +return ERR_PTR (-EEXIST );
I noticed that Jonathan mentioned here should return -EEXIST, but seems like returnning the found dport is better, because we don't need to check for PTR_ERR(dport) == -EEXIST case. See below comments.
Quoted 65 lines
drivers/cxl/core/port.c +39
-4+ + dport =devm_cxl_add_dport_by_dev (port, dport_dev); +if (IS_ERR (dport)) +return dport; + + rc =cxl_port_setup_with_dport (port, dport); +if (rc) { +reap_dport (port, dport); +return ERR_PTR (rc); + } + +return dport; +} + +static struct cxl_dport *devm_cxl_add_dport_by_uport (struct device *uport_dev, +struct device *dport_dev) +{ + struct cxl_port *port __free(put_cxl_port) = +find_cxl_port_by_uport (uport_dev); + +if (!port) +return ERR_PTR (-ENODEV ); + +guard (device)(&port->dev); +return devm_cxl_port_add_dport (port, dport_dev); +} +static int add_port_attach_ep (struct cxl_memdev *cxlmd,struct device *uport_dev,struct device *dport_dev)@@ -1584,6 +1694,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,*/ struct cxl_port *port __free(put_cxl_port) = NULL; scoped_guard(device, &parent_port->dev) { +struct cxl_dport *new_dport; +if (!parent_port->dev.driver) { dev_warn(&cxlmd->dev, "port %s:%s disabled, failed to enumerate CXL.mem\n",@@ -1592,6 +1704,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd, } port =find_cxl_port_at (parent_port, dport_dev, &dport); +if (!port) + port =find_cxl_port_by_uport (uport_dev);if (!port) { component_reg_phys =find_component_registers (uport_dev); port = devm_cxl_add_port(&parent_port->dev, uport_dev,@@ -1599,11 +1713,27 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,if (IS_ERR (port))return PTR_ERR (port); -/* retry find to pick up the new dport information */ - port =find_cxl_port_at (parent_port, dport_dev, &dport); -if (!port) -return -ENXIO ; +/* +* The port holds a device reference via find_cxl_port_at() +* if the port is valid. But if the port is newly created +* via devm_cxl_add_port(), no reference is held. Therefore +* the driver needs to get a device reference here. +*/ +get_device (&port->dev); } +
drivers/cxl/core/port.c static int add_port_attach_ep(struct cxl_memdev *cxlmd, · line 1734
Quoted 10 lines
drivers/cxl/core/port.c +10
-0+guard (device)(&port->dev); + new_dport =devm_cxl_port_add_dport (port, dport_dev); +if (IS_ERR (new_dport)) { +if (PTR_ERR (new_dport) != -EEXIST ) +return PTR_ERR (new_dport); + + new_dport =cxl_find_dport_by_dev (port, dport_dev); +if (!new_dport) +return -ENODEV ; + }
here can be
if (IS_ERR(new_dport))
return PTR_ERR(new_dport);
Quoted 56 lines
drivers/cxl/core/port.c +19
-9+ + dport = new_dport; } dev_dbg(&cxlmd->dev, "add to new port %s:%s\n",@@ -1620,11 +1750,14 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,return rc; } +#define CXL_ITER_LEVEL_SWITCH 1 +int devm_cxl_enumerate_ports (struct cxl_memdev *cxlmd) {struct device *dev = &cxlmd->dev; +struct device *dgparent;struct device *iter; -int rc; +int rc, i;/* * Skip intermediate port enumeration in the RCH case, there @@ -1643,7 +1776,7 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)* attempt fails. */ retry: -for (iter = dev; iter; iter =grandparent (iter)) { +for (i =0 , iter = dev; iter; i++, iter =grandparent (iter)) {struct device *dport_dev =grandparent (iter);struct device *uport_dev;struct cxl_dport *dport;@@ -1686,16 +1819,41 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)if (!dev_is_cxl_root_child (&port->dev))continue ; +/* +* This is a corner case where the rootport is setup but +* the switch dport is not. It needs to go back to the +* beginning to setup the switch port. +*/ +if (i >=CXL_ITER_LEVEL_SWITCH ) { + struct cxl_port *pport __free(put_cxl_port) = +cxl_mem_find_port (cxlmd, &dport); +if (!pport) + goto retry; + } +return 0 ; } - rc =add_port_attach_ep (cxlmd, uport_dev, dport_dev); -/* port missing, try to add parent */ -if (rc == -EAGAIN ) -continue ; -/* failed to add ep or port */ -if (rc) -return rc;
drivers/cxl/core/port.c int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd) · line 1846
Quoted 10 lines
drivers/cxl/core/port.c +10
-0+ dgparent =grandparent (dport_dev); +/* Only go down this path if we are at the root port */ +if (is_cxl_hierarchy_head (dgparent)) { + dport =devm_cxl_add_dport_by_uport (uport_dev, + dport_dev); +/* Added a dport, restart enumeration */ +if (!IS_ERR (dport) ||PTR_ERR (dport) == -EEXIST ) + goto retry; +if (IS_ERR (dport)) +return PTR_ERR (dport);
Same as above, and we don't need this "goto retry", because we can reuse below "goto retry".
I haven't fully understood this patch, so please correct me if I am wrong. Thanks.
drivers/cxl/core/port.c static int decoder_populate_targets(struct cxl_switch_decoder *cxlsd,
Quoted 14 lines
drivers/cxl/core/port.c +10
-0+ }else { + rc =add_port_attach_ep (cxlmd, uport_dev, dport_dev); +/* port missing, try to add parent */ +if (rc == -EAGAIN ) +continue ; +/* failed to add ep or port */ +if (rc) +return rc; + } +/* port added, new descendants possible, start over */ goto retry; }@@ -1727,16 +1885,19 @@ static int decoder_populate_targets(struct cxl_switch_decoder *cxlsd,
[snip]
Ming
Dave Jiang
maintainerRe: [PATCH v6 04/10] cxl: Defer dport allocation for switch ports
Quoted 272 lines · Li Ming
Quoted 271 lines · Dave Jiang
The current implementation enumerates the dports during the
cxl_portdriver probe. Without an endpoint connected, the dport may not be active during port probe. This scheme may prevent a valid hardware dport id to be retrieved and MMIO registers to be read when an endpoint is hot-plugged. Move the dport allocation and setup to behind memdev probe so the endpoint is guaranteed to be connected.In the original enumeration behavior, there are 3 phases (or 2 if no CXL switches) for port creation.
cxl_acpi()creates a Root Port (RP) from the ACPI0017.N device. Through that it enumerate downstream ports composed of ACPI0016.N devices throughadd_host_bridge_dport(). Once done, it useadd_host_bridge_uport()to create the ports that enumerates the PCI RPs as the dports of these ports. Every time a port is created, the port driver is attached anddrv->probe()is called anddevm_cxl_port_enumerate_dports()is envoked to enumerate and probe the dports.The second phase is if there are any CXL switches. When the pci endpoint device driver (
cxl_pci) calls probe, it will add a mem device and triggers thecxl_mem->probe().cxl_mem->probe()callsdevm_cxl_enumerate_ports()and attempts to discovery and create all the ports represent CXL switches. During this phase, a port is created per switch and the attached dports are also enumerated and probed.The last phase is creating endpoint port which happens for all endpoint devices.
In this commit, the port create and its dport probing in
cxl_acpiis not changed. That will be handled in a different patch later on. The behavior change is only for CXL switch ports. Only the dport that is part of the path for an endpoint device to the RP will be probed. This happens naturally by the code walking up the device hierarchy and identifying the upstream device and the downstream device.There are two points where the interception of dport creation happens during the
devm_cxl_enumerate_ports()path. The first location is right before the function callsadd_port_attach_ep()where it does the dport allocation for the RP. Once the dport is allocated, the iteration path is reset to the beginning to try again. The second location happens inadd_port_attach_ep()after the location where either the port is discovered or allocated new if it does not exist.Locking of port device during
__cxl_port_add_dport()protects modifications against the port and its dports while multiple endpoints can be probing at the same time and the same port is being modified concurrently.While the decoders are allocated during the port driver probe, The decoders must also be updated since previously it's all done when all the dports are setup and now every time a dport is setup per endpoint, the switch target listing need to be updated with new dport. A
guard(rwsem_write)is used to update decoder targets. This is similar to whendecoder_populate_target()is called and the decoder programming must be protected.Reviewed-by Jonathan Cameron <[email protected]>Signed-off-by Dave Jiang <[email protected]>---
v6:
- Return-EEXISTwhen dport is already established. (Jonathan)
- Check !pport instead of !port. (Ming)
- branchdevm_cxl_add_dport_by_uport()vsadd_port_attach_ep(). (Ming)--- drivers/cxl/core/core.h | 2 + drivers/cxl/core/pci.c | 88 ++++++++++++++++++ drivers/cxl/core/port.c | 193 ++++++++++++++++++++++++++++++++++++---- drivers/cxl/cxl.h | 5 ++ drivers/cxl/port.c | 8 +- 5 files changed, 275 insertions(+), 21 deletions(-)drivers/cxl/core/core.h +2
-0@@ -122,6 +122,8 @@ void cxl_ras_exit(void);int cxl_gpf_port_setup (struct cxl_dport *dport);int cxl_acpi_get_extended_linear_cache_size (struct resource *backing_res,int nid,resource_size_t *size); +struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev);#ifdef CONFIG_CXL_FEATURES struct cxl_feat_entry *drivers/cxl/core/pci.c +88
-0@@ -24,6 +24,44 @@ static unsigned short media_ready_timeout = 60;module_param (media_ready_timeout, ushort,0644 );MODULE_PARM_DESC (media_ready_timeout,"seconds to wait for media ready" ); +/** +* devm_cxl_add_dport_by_dev - allocate a dport by dport device +* @port: cxl_port that hosts the dport +* @dport_dev: 'struct device' of the dport +* +* Returns the allocate dport on success or ERR_PTR() of -errno on error +*/ +struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev) +{ +struct cxl_register_map map; +struct pci_dev *pdev; +u32 lnkcap, port_num; +int type; +int rc; + +if (!dev_is_pci (dport_dev)) +return ERR_PTR (-EINVAL ); + +device_lock_assert (&port->dev); + + pdev =to_pci_dev (dport_dev); + type =pci_pcie_type (pdev); +if (type !=PCI_EXP_TYPE_DOWNSTREAM && type !=PCI_EXP_TYPE_ROOT_PORT ) +return ERR_PTR (-EINVAL ); + +if (pci_read_config_dword (pdev,pci_pcie_cap (pdev) +PCI_EXP_LNKCAP , + &lnkcap)) +return ERR_PTR (-ENXIO ); + + rc =cxl_find_regblock (pdev,CXL_REGLOC_RBI_COMPONENT , &map); +if (rc) +dev_dbg (&port->dev,"failed to find component registers\n" ); + + port_num =FIELD_GET (PCI_EXP_LNKCAP_PN , lnkcap); +return devm_cxl_add_dport (port, &pdev->dev, port_num, map.resource); +} +struct cxl_walk_context {struct pci_bus *bus;struct cxl_port *port;@@ -1169,3 +1207,53 @@ int cxl_gpf_port_setup(struct cxl_dport *dport)return 0 ; } + +static int match_dport (struct pci_dev *pdev,void *data) +{ +struct cxl_walk_context *ctx = data; +int type =pci_pcie_type (pdev); + +if (pdev->bus != ctx->bus) +return 0 ; +if (!pci_is_pcie (pdev)) +return 0 ; +if (type != ctx->type) +return 0 ; + + ctx->count++; +return 0 ; +} + +int cxl_port_update_total_dports (struct cxl_port *port) +{ +struct pci_bus *bus =cxl_port_to_pci_bus (port); +struct cxl_walk_context ctx; +int type; + +if (!bus) { +dev_err (&port->dev,"No PCI bus found for port %s\n" , +dev_name (&port->dev)); +return -ENXIO ; + } + +if (pci_is_root_bus (bus)) + type =PCI_EXP_TYPE_ROOT_PORT ; +else + type =PCI_EXP_TYPE_DOWNSTREAM ; + + ctx = (struct cxl_walk_context ) { + .bus = bus, + .type = type, + }; +pci_walk_bus (bus, match_dport, &ctx); + + port->total_dports = ctx.count; +if (port->total_dports ==0 ) { +dev_warn (&port->dev,"No dports found for port %s on bus %s\n" , +dev_name (&port->dev), bus->name); +return -ENXIO ; + } + +return 0 ; +} +EXPORT_SYMBOL_NS_GPL (cxl_port_update_total_dports,"CXL" );drivers/cxl/core/port.c +77
-0@@ -1551,6 +1551,116 @@ static resource_size_t find_component_registers(struct device *dev)return map.resource; } +static int match_port_by_uport (struct device *dev,const void *data) +{ +const struct device *uport_dev = data; +struct cxl_port *port; + +if (!is_cxl_port (dev)) +return 0 ; + + port =to_cxl_port (dev); +return uport_dev == port->uport_dev; +} + +/* +* Function takes a device reference on the port device. Caller should do a +* put_device() when done. +*/ +static struct cxl_port *find_cxl_port_by_uport (struct device *uport_dev) +{ +struct device *dev; + + dev =bus_find_device (&cxl_bus_type,NULL , uport_dev, match_port_by_uport); +if (dev) +return to_cxl_port (dev); +return NULL ; +} + +static int update_switch_decoder (struct device *dev,void *data) +{ +struct cxl_dport *dport = data; +struct cxl_switch_decoder *cxlsd; +struct cxl_decoder *cxld; +int i; + +if (!is_switch_decoder (dev)) +return 0 ; + + cxlsd =to_cxl_switch_decoder (dev); + cxld = &cxlsd->cxld; +guard (rwsem_write)(&cxl_region_rwsem); +for (i =0 ; i < cxld->interleave_ways; i++) { +if (cxlsd->target_map[i] == dport->port_id) { + cxlsd->target[i] = dport; +return 0 ; + } + } + +dev_dbg (dev,"Updating decoder target_map with %s and none found\n" , +dev_name (dport->dport_dev)); + +return 0 ; +} + +static int update_decoders_with_dport (struct cxl_port *port,struct cxl_dport *dport) +{ +device_lock_assert (&port->dev); +return device_for_each_child (&port->dev, dport, update_switch_decoder); +} + +static int cxl_port_setup_with_dport (struct cxl_port *port, +struct cxl_dport *dport) +{ +device_lock_assert (&port->dev); + +cxl_switch_parse_cdat (port); + +return update_decoders_with_dport (port, dport); +} + +static struct cxl_dport *devm_cxl_port_add_dport (struct cxl_port *port, +struct device *dport_dev) +{ +struct cxl_dport *dport; +int rc; + +device_lock_assert (&port->dev); + +/* Port driver not attached yet, wait for cxl_acpi reprobe */
Quoted 8 lines
drivers/cxl/core/port.c static resource_size_t find_component_registers(struct device *dev) · line 1636
Quoted 6 lines
drivers/cxl/core/port.c +6
-0+if (!port->dev.driver) +return ERR_PTR (-ENODEV ); + + dport =cxl_find_dport_by_dev (port, dport_dev); +if (dport) +return ERR_PTR (-EEXIST );I noticed that Jonathan mentioned here should return
-EEXIST, but seems like returnning the found dport is better, because we don't need to check forPTR_ERR(dport)==-EEXISTcase. See below comments.
Yes it definitely makes the error handling cleaner.
Quoted 143 lines
Quoted 66 lines
drivers/cxl/core/port.c +39
-4+ + dport =devm_cxl_add_dport_by_dev (port, dport_dev); +if (IS_ERR (dport)) +return dport; + + rc =cxl_port_setup_with_dport (port, dport); +if (rc) { +reap_dport (port, dport); +return ERR_PTR (rc); + } + +return dport; +} + +static struct cxl_dport *devm_cxl_add_dport_by_uport (struct device *uport_dev, +struct device *dport_dev) +{ + struct cxl_port *port __free(put_cxl_port) = +find_cxl_port_by_uport (uport_dev); + +if (!port) +return ERR_PTR (-ENODEV ); + +guard (device)(&port->dev); +return devm_cxl_port_add_dport (port, dport_dev); +} +static int add_port_attach_ep (struct cxl_memdev *cxlmd,struct device *uport_dev,struct device *dport_dev)@@ -1584,6 +1694,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,*/ struct cxl_port *port __free(put_cxl_port) = NULL; scoped_guard(device, &parent_port->dev) { +struct cxl_dport *new_dport; +if (!parent_port->dev.driver) { dev_warn(&cxlmd->dev, "port %s:%s disabled, failed to enumerate CXL.mem\n",@@ -1592,6 +1704,8 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd, } port =find_cxl_port_at (parent_port, dport_dev, &dport); +if (!port) + port =find_cxl_port_by_uport (uport_dev);if (!port) { component_reg_phys =find_component_registers (uport_dev); port = devm_cxl_add_port(&parent_port->dev, uport_dev,@@ -1599,11 +1713,27 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,if (IS_ERR (port))return PTR_ERR (port); -/* retry find to pick up the new dport information */ - port =find_cxl_port_at (parent_port, dport_dev, &dport); -if (!port) -return -ENXIO ; +/* +* The port holds a device reference via find_cxl_port_at() +* if the port is valid. But if the port is newly created +* via devm_cxl_add_port(), no reference is held. Therefore +* the driver needs to get a device reference here. +*/ +get_device (&port->dev); } +drivers/cxl/core/port.c static int add_port_attach_ep(struct cxl_memdev *cxlmd, · line 1734
Quoted 10 lines
drivers/cxl/core/port.c +10
-0+guard (device)(&port->dev); + new_dport =devm_cxl_port_add_dport (port, dport_dev); +if (IS_ERR (new_dport)) { +if (PTR_ERR (new_dport) != -EEXIST ) +return PTR_ERR (new_dport); + + new_dport =cxl_find_dport_by_dev (port, dport_dev); +if (!new_dport) +return -ENODEV ; + }here can be
if (
IS_ERR(new_dport))return
PTR_ERR(new_dport);Quoted 60 lines
drivers/cxl/core/port.c +23
-9+ + dport = new_dport; } dev_dbg(&cxlmd->dev, "add to new port %s:%s\n",@@ -1620,11 +1750,14 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,return rc; } +#define CXL_ITER_LEVEL_SWITCH 1 +int devm_cxl_enumerate_ports (struct cxl_memdev *cxlmd) {struct device *dev = &cxlmd->dev; +struct device *dgparent;struct device *iter; -int rc; +int rc, i;/* * Skip intermediate port enumeration in the RCH case, there @@ -1643,7 +1776,7 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)* attempt fails. */ retry: -for (iter = dev; iter; iter =grandparent (iter)) { +for (i =0 , iter = dev; iter; i++, iter =grandparent (iter)) {struct device *dport_dev =grandparent (iter);struct device *uport_dev;struct cxl_dport *dport;@@ -1686,16 +1819,41 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)if (!dev_is_cxl_root_child (&port->dev))continue ; +/* +* This is a corner case where the rootport is setup but +* the switch dport is not. It needs to go back to the +* beginning to setup the switch port. +*/ +if (i >=CXL_ITER_LEVEL_SWITCH ) { + struct cxl_port *pport __free(put_cxl_port) = +cxl_mem_find_port (cxlmd, &dport); +if (!pport) + goto retry; + } +return 0 ; } - rc =add_port_attach_ep (cxlmd, uport_dev, dport_dev); -/* port missing, try to add parent */ -if (rc == -EAGAIN ) -continue ; -/* failed to add ep or port */ -if (rc) -return rc; + dgparent =grandparent (dport_dev); +/* Only go down this path if we are at the root port */ +if (is_cxl_hierarchy_head (dgparent)) { + dport = devm_cxl_add_dport_by_uport(uport_dev,
Quoted 8 lines
drivers/cxl/core/port.c int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd) · line 1846
Quoted 6 lines
drivers/cxl/core/port.c +6
-0+ dport_dev); +/* Added a dport, restart enumeration */ +if (!IS_ERR (dport) ||PTR_ERR (dport) == -EEXIST ) + goto retry; +if (IS_ERR (dport)) +return PTR_ERR (dport);Same as above, and we don't need this "goto retry", because we can reuse below "goto retry".
Yes we can take that out and drop down.
Quoted 2 lines
I haven't fully understood this patch, so please correct me if I am wrong. Thanks.
Thank you for the detailed reviews.
Quoted 21 lines
drivers/cxl/core/port.c static int decoder_populate_targets(struct cxl_switch_decoder *cxlsd,
Quoted 15 lines
drivers/cxl/core/port.c +10
-0+ }else { + rc =add_port_attach_ep (cxlmd, uport_dev, dport_dev); +/* port missing, try to add parent */ +if (rc == -EAGAIN ) +continue ; +/* failed to add ep or port */ +if (rc) +return rc; + } +/* port added, new descendants possible, start over */ goto retry; }@@ -1727,16 +1885,19 @@ static int decoder_populate_targets(struct cxl_switch_decoder *cxlsd,[snip]
Ming
Dave Jiang
maintainerPATCH v6 5/10 cxl/test: Add cxl_test support for cxl_port_update_total_ports()
In reply to Dave JiangIn the delayed dport allocation scheme, the total number of dports need to be discovered during port probe. Add the mock function that does it for cxl_test.
--- tools/testing/cxl/Kbuild | 1 + tools/testing/cxl/test/cxl.c | 53 +++++++++++++++++++++++++++++++++-- tools/testing/cxl/test/mock.c | 15 ++++++++++ tools/testing/cxl/test/mock.h | 1 + 4 files changed, 68 insertions(+), 2 deletions(-)
tools/testing/cxl/Kbuild +1 -0
@@ -5,6 +5,7 @@ ldflags-y += --wrap=acpi_evaluate_integer ldflags-y += --wrap=acpi_pci_find_root ldflags-y += --wrap=nvdimm_bus_register ldflags-y += --wrap=devm_cxl_port_enumerate_dports +ldflags-y += --wrap=cxl_port_update_total_dports ldflags-y += --wrap=devm_cxl_setup_hdm ldflags-y += --wrap=devm_cxl_add_passthrough_decoder ldflags-y += --wrap=devm_cxl_enumerate_decoders
tools/testing/cxl/test/cxl.c +51 -2
73 lines not on this page · raw message
tools/testing/cxl/test/mock.c +15 -0
@@ -196,6 +196,21 @@ int __wrap_devm_cxl_port_enumerate_dports(struct cxl_port *port) }EXPORT_SYMBOL_NS_GPL (__wrap_devm_cxl_port_enumerate_dports,"CXL" ); +int __wrap_cxl_port_update_total_dports (struct cxl_port *port) +{ +int rc, index; +struct cxl_mock_ops *ops =get_cxl_mock_ops (&index); + +if (ops && ops->is_mock_port (port->uport_dev)) + rc = ops->cxl_port_update_total_dports (port); +else + rc =cxl_port_update_total_dports (port); +put_cxl_mock_ops (index); + +return rc; +} +EXPORT_SYMBOL_NS_GPL (__wrap_cxl_port_update_total_dports,"CXL" ); +int __wrap_cxl_await_media_ready (struct cxl_dev_state *cxlds) {int rc, index;
tools/testing/cxl/test/mock.h +1 -0
@@ -20,6 +20,7 @@ struct cxl_mock_ops {bool (*is_mock_port)(struct device *dev);bool (*is_mock_dev)(struct device *dev);int (*devm_cxl_port_enumerate_dports)(struct cxl_port *port); +int (*cxl_port_update_total_dports)(struct cxl_port *port);struct cxl_hdm *(*devm_cxl_setup_hdm)(struct cxl_port *port,struct cxl_endpoint_dvsec_info *info);int (*devm_cxl_add_passthrough_decoder)(struct cxl_port *port);
Signature · 1 line
2.50.0
Re: [PATCH v6 05/10] cxl/test: Add cxl_test support for cxl_port_update_total_ports()
Quoted 6 lines · Dave Jiang
In the delayed dport allocation scheme, the total number of dports need to be discovered during port probe. Add the mock function that does it for
cxl_test.Reviewed-by Jonathan Cameron <[email protected]>Signed-off-by Dave Jiang <[email protected]>
Dave Jiang
maintainerPATCH v6 6/10 cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
In reply to Dave Jiangdevm_cxl_add_dport_by_dev() outside of cxl_test is done through PCI hierarchy. However with cxl_test, it needs to be done through the platform device hierarchy. Add the mock function for devm_cxl_add_dport_by_dev().
When cxl_core calls a cxl_core exported function and that function is mocked by cxl_test, the call chain causes a circular dependency issue. Dan provided a workaround to avoid this issue. Apply the method to changes from the late dport allocation changes in order to enable cxl-test.
In cxl_core they are defined with "__" added in front of the function. A macro is used to define the original function names for when non-test version of the kernel is built. A bit of macros and typedefs are used to allow mocking of those functions in cxl_test.
--- drivers/cxl/core/core.h | 2 -- drivers/cxl/core/pci.c | 7 ++++--- drivers/cxl/cxl.h | 19 +++++++++++++++++ tools/testing/cxl/Kbuild | 1 + tools/testing/cxl/cxl_core_exports.c | 12 +++++++++++ tools/testing/cxl/exports.h | 10 +++++++++ tools/testing/cxl/test/cxl.c | 31 ++++++++++++++++++++++++++++ tools/testing/cxl/test/mock.c | 23 +++++++++++++++++++++ tools/testing/cxl/test/mock.h | 2 ++ 9 files changed, 102 insertions(+), 5 deletions(-) create mode 100644 tools/testing/cxl/exports.h
drivers/cxl/core/core.h +0 -2
@@ -122,8 +122,6 @@ void cxl_ras_exit(void);int cxl_gpf_port_setup (struct cxl_dport *dport);int cxl_acpi_get_extended_linear_cache_size (struct resource *backing_res,int nid,resource_size_t *size); -struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, -struct device *dport_dev);#ifdef CONFIG_CXL_FEATURES struct cxl_feat_entry *
drivers/cxl/core/pci.c +4 -3
@@ -25,14 +25,14 @@ module_param(media_ready_timeout, ushort, 0644);MODULE_PARM_DESC (media_ready_timeout,"seconds to wait for media ready" );/** -* devm_cxl_add_dport_by_dev - allocate a dport by dport device +* __devm_cxl_add_dport_by_dev - allocate a dport by dport device * @port: cxl_port that hosts the dport * @dport_dev: 'struct device' of the dport * * Returns the allocate dport on success or ERR_PTR() of -errno on error */ -struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, -struct device *dport_dev) +struct cxl_dport *__devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev) {struct cxl_register_map map;struct pci_dev *pdev;
@@ -61,6 +61,7 @@ struct cxl_dport *devm_cxl_add_dport_by_dev(struct cxl_port *port, port_num =FIELD_GET (PCI_EXP_LNKCAP_PN , lnkcap);return devm_cxl_add_dport (port, &pdev->dev, port_num, map.resource); } +EXPORT_SYMBOL_NS_GPL (__devm_cxl_add_dport_by_dev,"CXL" );struct cxl_walk_context {struct pci_bus *bus;
drivers/cxl/cxl.h +19 -0
@@ -907,6 +907,10 @@ void cxl_coordinates_combine(struct access_coordinate *out,bool cxl_endpoint_decoder_reset_detected (struct cxl_port *port);int cxl_port_update_total_dports (struct cxl_port *port); +struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev); +struct cxl_dport *__devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev);/* * Unit test builds overrides this to __weak, find the 'strong' version
@@ -928,4 +932,19 @@ static inline struct rw_semaphore *rwsem_read_intr_acquire(struct rw_semaphore * DEFINE_FREE(rwsem_read_release, struct rw_semaphore *, if (_T) up_read(_T)) +/* +* Declaration for functions that are mocked by cxl_test that are called by +* cxl_core. The respective functions are defined as __foo() and called by +* cxl_core as foo(). The macros below ensures that those functions would +* exist as foo(). See tools/testing/cxl/cxl_core_exports.c and +* tools/testing/cxl/exports.h for setting up the mock functions. The dance +* is done to avoid a circular dependency where cxl_core calls a function that +* ends up being a mock function and goes to * cxl_test where it calls a +* cxl_core function. + */ +#ifndef CXL_TEST_ENABLE +#define DECLARE_TESTABLE (x) __##x +#define devm_cxl_add_dport_by_dev DECLARE_TESTABLE(devm_cxl_add_dport_by_dev) +#endif +#endif /* __CXL_H__ */
tools/testing/cxl/Kbuild +1 -0
@@ -22,6 +22,7 @@ CXL_SRC := $(DRIVERS)/cxl CXL_CORE_SRC := $(DRIVERS)/cxl/core ccflags-y := -I$(srctree)/drivers/cxl/ ccflags-y += -D__mock=__weak +ccflags-y += -DCXL_TEST_ENABLE=1 ccflags-y += -DTRACE_INCLUDE_PATH=$(CXL_CORE_SRC) -I$(srctree)/drivers/cxl/core/ obj-m += cxl_acpi.o
tools/testing/cxl/cxl_core_exports.c +12 -0
@@ -2,6 +2,18 @@/* Copyright(c) 2022 Intel Corporation. All rights reserved. */ #include "cxl.h" +#include "exports.h" /* Exporting of cxl_core symbols that are only used by cxl_test */ EXPORT_SYMBOL_NS_GPL (cxl_num_decoders_committed,"CXL" ); + +cxl_add_dport_by_dev_fn _devm_cxl_add_dport_by_dev = + __devm_cxl_add_dport_by_dev; +EXPORT_SYMBOL_NS_GPL (_devm_cxl_add_dport_by_dev,"CXL" ); + +struct cxl_dport *devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev) +{ +return _devm_cxl_add_dport_by_dev (port, dport_dev); +} +EXPORT_SYMBOL_NS_GPL (devm_cxl_add_dport_by_dev,"CXL" );
tools/testing/cxl/exports.h new file +10 -0
@@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright(c) 2025 Intel Corporation */ +#ifndef __MOCK_CXL_EXPORTS_H_ +#define __MOCK_CXL_EXPORTS_H_ + +typedef struct cxl_dport *(*cxl_add_dport_by_dev_fn )(struct cxl_port *port, +struct device *dport_dev); +extern cxl_add_dport_by_dev_fn _devm_cxl_add_dport_by_dev; + +#endif
tools/testing/cxl/test/cxl.c +31 -0
@@ -1026,6 +1026,36 @@ static int mock_cxl_port_enumerate_dports(struct cxl_port *port)return 0 ; } +static struct cxl_dport *mock_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev) +{ +struct platform_device **array; +int rc, i, array_size; + + rc =get_port_array (port, &array, &array_size); +if (rc) +return ERR_PTR (rc); + +for (i =0 ; i < array_size; i++) { +struct platform_device *pdev = array[i]; + +if (pdev->dev.parent != port->uport_dev) { +dev_dbg (&port->dev,"%s: mismatch parent %s\n" , +dev_name (port->uport_dev), +dev_name (pdev->dev.parent)); +continue ; + } + +if (&pdev->dev != dport_dev) +continue ; + +return devm_cxl_add_dport (port, &pdev->dev, pdev->id, +CXL_RESOURCE_NONE ); + } + +return ERR_PTR (-ENODEV ); +} +/* * Faking the cxl_dpa_perf for the memdev when appropriate. */
@@ -1088,6 +1118,7 @@ static struct cxl_mock_ops cxl_mock_ops = { .devm_cxl_add_passthrough_decoder = mock_cxl_add_passthrough_decoder, .devm_cxl_enumerate_decoders = mock_cxl_enumerate_decoders, .cxl_endpoint_parse_cdat = mock_cxl_endpoint_parse_cdat, + .devm_cxl_add_dport_by_dev = mock_cxl_add_dport_by_dev, .list = LIST_HEAD_INIT(cxl_mock_ops.list), };
tools/testing/cxl/test/mock.c +23 -0
@@ -10,12 +10,18 @@#include <cxlmem.h> #include <cxlpci.h> #include "mock.h" +#include "../exports.h" static LIST_HEAD (mock); +static struct cxl_dport * +redirect_devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev); +void register_cxl_mock_ops (struct cxl_mock_ops *ops) {list_add_rcu (&ops->list, &mock); + _devm_cxl_add_dport_by_dev = redirect_devm_cxl_add_dport_by_dev; }EXPORT_SYMBOL_GPL (register_cxl_mock_ops);
@@ -23,6 +29,7 @@ DEFINE_STATIC_SRCU(cxl_mock_srcu);void unregister_cxl_mock_ops (struct cxl_mock_ops *ops) { + _devm_cxl_add_dport_by_dev = __devm_cxl_add_dport_by_dev;list_del_rcu (&ops->list);synchronize_srcu (&cxl_mock_srcu); }
@@ -326,6 +333,22 @@ void __wrap_cxl_dport_init_ras_reporting(struct cxl_dport *dport, struct device }EXPORT_SYMBOL_NS_GPL (__wrap_cxl_dport_init_ras_reporting,"CXL" ); +struct cxl_dport *redirect_devm_cxl_add_dport_by_dev (struct cxl_port *port, +struct device *dport_dev) +{ +int index; +struct cxl_mock_ops *ops =get_cxl_mock_ops (&index); +struct cxl_dport *dport; + +if (ops && ops->is_mock_port (port->uport_dev)) + dport = ops->devm_cxl_add_dport_by_dev (port, dport_dev); +else + dport =devm_cxl_add_dport_by_dev (port, dport_dev); +put_cxl_mock_ops (index); + +return dport; +} +MODULE_LICENSE ("GPL v2" );MODULE_DESCRIPTION ("cxl_test: emulation module" );MODULE_IMPORT_NS ("ACPI" );
tools/testing/cxl/test/mock.h +2 -0
@@ -27,6 +27,8 @@ struct cxl_mock_ops {int (*devm_cxl_enumerate_decoders)(struct cxl_hdm *hdm,struct cxl_endpoint_dvsec_info *info);void (*cxl_endpoint_parse_cdat)(struct cxl_port *port); +struct cxl_dport *(*devm_cxl_add_dport_by_dev)( +struct cxl_port *port,struct device *dport_dev); };void register_cxl_mock_ops (struct cxl_mock_ops *ops);
Signature · 1 line
2.50.0
Re: [PATCH v6 06/10] cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
Quoted 10 lines · Dave Jiang
devm_cxl_add_dport_by_dev()outside ofcxl_testis done through PCI hierarchy. However withcxl_test, it needs to be done through the platform device hierarchy. Add the mock function fordevm_cxl_add_dport_by_dev().When
cxl_corecalls acxl_coreexported function and that function is mocked bycxl_test, the call chain causes a circular dependency issue. Dan provided a workaround to avoid this issue. Apply the method to changes from the late dport allocation changes in order to enable cxl-test.
Quoted 8 lines
In
cxl_corethey are defined with "__" added in front of the function. A macro is used to define the original function names for when non-test version of the kernel is built. A bit of macros and typedefs are used to allow mocking of those functions incxl_test.Co-developed-by Dan Williams <[email protected]>Reviewed-by Jonathan Cameron <[email protected]>Signed-off-by Dave Jiang <[email protected]>
Dave Jiang
maintainerPATCH v6 7/10 cxl: Change sslbis handler to only handle single dport
In reply to Dave JiangWhile cxl_switch_parse_cdat() is harmless to be run multiple times, it is not efficient in the current scheme where one dport is being updated at a time by the memdev probe path. Change the input parameter to the specific dport being updated to pick up the SSLBIS information for just that dport.
--- drivers/cxl/core/cdat.c | 23 ++++++++++------------- drivers/cxl/core/port.c | 2 +- drivers/cxl/cxl.h | 2 +- 3 files changed, 12 insertions(+), 15 deletions(-)
drivers/cxl/core/cdat.c +10 -13
@@ -440,8 +440,8 @@ static int cdat_sslbis_handler(union acpi_subtable_headers *header, void *arg, } *tbl = (struct acpi_cdat_sslbis_table *)header;int size =sizeof (header->cdat) +sizeof (tbl->sslbis_header);struct acpi_cdat_sslbis *sslbis; -struct cxl_port *port = arg; -struct device *dev = &port->dev; +struct cxl_dport *dport = arg; +struct device *dev = &dport->port->dev;int remain, entries, i;u16 len;
@@ -467,8 +467,6 @@ static int cdat_sslbis_handler(union acpi_subtable_headers *header, void *arg,u16 y =le16_to_cpu ((__force __le16 )tbl->entries[i].porty_id);__le64 le_base;__le16 le_val; -struct cxl_dport *dport; -unsigned long index;u16 dsp_id;u64 val;
@@ -499,28 +497,27 @@ static int cdat_sslbis_handler(union acpi_subtable_headers *header, void *arg, val =cdat_normalize (le16_to_cpu (le_val),le64_to_cpu (le_base), sslbis->data_type); -xa_for_each (&port->dports, index, dport) { -if (dsp_id ==ACPI_CDAT_SSLBIS_ANY_PORT || - dsp_id == dport->port_id) { -cxl_access_coordinate_set (dport->coord, - sslbis->data_type, - val); - } +if (dsp_id ==ACPI_CDAT_SSLBIS_ANY_PORT || + dsp_id == dport->port_id) { +cxl_access_coordinate_set (dport->coord, + sslbis->data_type, val); +return 0 ; } }return 0 ; } -void cxl_switch_parse_cdat (struct cxl_port *port) +void cxl_switch_parse_cdat (struct cxl_dport *dport) { +struct cxl_port *port = dport->port;int rc;if (!port->cdat.table)return ; rc =cdat_table_parse (ACPI_CDAT_TYPE_SSLBIS , cdat_sslbis_handler, - port, port->cdat.table, port->cdat.length); + dport, port->cdat.table, port->cdat.length); rc =cdat_table_parse_output (rc);if (rc)dev_dbg (&port->dev,"Failed to parse SSLBIS: %d\n" , rc);
drivers/cxl/core/port.c +1 -1
@@ -1614,7 +1614,7 @@ static int cxl_port_setup_with_dport(struct cxl_port *port, {device_lock_assert (&port->dev); -cxl_switch_parse_cdat (port); +cxl_switch_parse_cdat (dport);return update_decoders_with_dport (port, dport); }
drivers/cxl/cxl.h +1 -1
@@ -891,7 +891,7 @@ static inline u64 cxl_port_get_spa_cache_alias(struct cxl_port *endpoint,#endif void cxl_endpoint_parse_cdat (struct cxl_port *port); -void cxl_switch_parse_cdat (struct cxl_port *port); +void cxl_switch_parse_cdat (struct cxl_dport *dport);int cxl_endpoint_get_perf_coordinates (struct cxl_port *port,struct access_coordinate *coord);
Signature · 1 line
2.50.0
Dave Jiang
maintainerPATCH v6 8/10 cxl: Create an xarray to tie a host bridge to the cxl_root
In reply to Dave JiangAdd helper functions to setup association of a host bridge device to a related cxl_root. Functions are in preparation to support the moving of host bridge ports creation from cxl_acpi to cxl_memdev probe path.
--- drivers/cxl/core/port.c | 53 +++++++++++++++++++++++++++++++++++++++++ drivers/cxl/cxl.h | 4 ++++ 2 files changed, 57 insertions(+)
drivers/cxl/core/port.c +53 -0
@@ -38,6 +38,7 @@ DECLARE_RWSEM(cxl_region_rwsem);static DEFINE_IDA (cxl_port_ida);static DEFINE_XARRAY (cxl_root_buses); +static DEFINE_XARRAY (cxl_root_ports);/* * The terminal device in PCI is NULL and @platform_bus
@@ -1014,6 +1015,58 @@ int devm_cxl_register_pci_bus(struct device *host, struct device *uport_dev, }EXPORT_SYMBOL_NS_GPL (devm_cxl_register_pci_bus,"CXL" ); +/** +* cxl_hb_uport_dev_to_root - Retrieve cxl_root tied to the host bridge device +* @hb_uport_dev: host bridge upstream port device +* +* Return cxl_root on success or NULL on failure +* +* A reference is taken on the port device. Caller needs to call put_device() +* when done. +*/ +struct cxl_root *cxl_hb_uport_dev_to_root (struct device *hb_uport_dev) +{ +struct cxl_root *root; + + root =xa_load (&cxl_root_ports, (unsigned long )hb_uport_dev); +if (!root) +return NULL ; + +get_device (&root->port.dev); + +return root; +} +EXPORT_SYMBOL_NS_GPL (cxl_hb_uport_dev_to_root,"CXL" ); + +static void unregister_hb_uport_root_ports (void *hb_uport_dev) +{ +xa_erase (&cxl_root_ports, (unsigned long )hb_uport_dev); +} + +/** +* devm_cxl_register_hb_uport_root_port - Tie a hostbridge device to a root port +* @host: device that hosts the memory for the xarray entries +* @hb_uport_dev: host bridge device that serves as the xarray index +* @root: cxl_root that serves as the xarray entry data +* +* Return 0 on success or -errno on failure. +*/ +int devm_cxl_register_hb_uport_root_port (struct device *host, +struct device *hb_uport_dev, +struct cxl_root *root) +{ +int rc; + + rc =xa_insert (&cxl_root_ports, (unsigned long )hb_uport_dev, root, +GFP_KERNEL ); +if (rc) +return rc; + +return devm_add_action_or_reset (host, unregister_hb_uport_root_ports, + hb_uport_dev); +} +EXPORT_SYMBOL_NS_GPL (devm_cxl_register_hb_uport_root_port,"CXL" ); +static bool dev_is_cxl_root_child (struct device *dev) {struct cxl_port *port, *parent;
drivers/cxl/cxl.h +4 -0
@@ -734,6 +734,10 @@ struct pci_bus;int devm_cxl_register_pci_bus (struct device *host,struct device *uport_dev,struct pci_bus *bus);struct pci_bus *cxl_port_to_pci_bus (struct cxl_port *port); +int devm_cxl_register_hb_uport_root_port (struct device *host, +struct device *hb_uport_dev, +struct cxl_root *root); +struct cxl_root *cxl_hb_uport_dev_to_root (struct device *uport_dev); struct cxl_port *devm_cxl_add_port(struct device *host, struct device *uport_dev, resource_size_t component_reg_phys,
Signature · 1 line
2.50.0
Re: [PATCH v6 08/10] cxl: Create an xarray to tie a host bridge to the cxl_root
Quoted 6 lines · Dave Jiang
Add helper functions to setup association of a host bridge device to a related
cxl_root. Functions are in preparation to support the moving of host bridge ports creation fromcxl_acpitocxl_memdevprobe path.Reviewed-by Jonathan Cameron <[email protected]>Signed-off-by Dave Jiang <[email protected]>
Dave Jiang
maintainerPATCH v6 9/10 cxl: Move enumeration of hostbridge ports to the memdev probe path
In reply to Dave JiangCurrent enuemration scheme in cxl_acpi module creates the ports under the root port by enumerating the hostbridges after the dports under the root port is created. However error messages "cxl portN: Couldn't locate the CXL.cache and CXL.mem capability array header" is observed when certain platform has PCIe hotplug option turned on in BIOS. If the cxl_acpi module probe is running before the CXL link between the endpoint device and the RP is established, then the platform may not have exposed DVSEC ID 3 and/or DVSEC ID 7 blocks which will trigger the error message. This behavior is defined by the spec and not a hardware quirk.
Setup an association in cxl_port to tie the host bridge device to the associated cxl_root. The cxl_root provides a callback that's setup by the cxl_acpi probe function in order to create a port per host bridge that was previously done during cxl_acpi probe. Add the calling of the callback in devm_cxl_enumerate_ports(). The observed behavior is that ports that are not connected to endpoint device(s) are no longer enumerated. This should also remove any excessive noise of port probe failing on those inactive ports.
---
v6:
- Deal with -EEXIST output for devm_cxl_port_add_dport()
- Set dport to NULL during declare. (Jonathan)
--- drivers/cxl/acpi.c | 137 ++++++++++++++++++++++++---------------- drivers/cxl/core/port.c | 84 ++++++++++++++++++++++++ drivers/cxl/cxl.h | 2 + 3 files changed, 168 insertions(+), 55 deletions(-)
drivers/cxl/acpi.c +82 -55
@@ -296,8 +296,80 @@ static int cxl_acpi_qos_class(struct cxl_root *cxl_root,return cxl_acpi_evaluate_qtg_dsm (handle, coord, entries, qos_class); } +/* Note, @dev is used by mock_acpi_table_parse_cedt() */ +struct cxl_chbs_context { +struct device *dev; +unsigned long long uid; +resource_size_t base; +u32 cxl_version; +int nr_versions; +u32 saved_version; +}; + +static int cxl_get_chbs (struct device *dev,struct acpi_device *hb, +struct cxl_chbs_context *ctx); + +/* +* A host bridge is a dport to a CFMWS decoder and it is a uport to the +* dport (PCIe Root Ports) in the host bridge. +*/ +static int cxl_acpi_setup_hostbridge_uport (struct cxl_root *cxl_root, +struct device *bridge_dev) +{ +struct cxl_port *root_port = &cxl_root->port; +struct device *host = root_port->dev.parent; +struct acpi_device *hb =ACPI_COMPANION (bridge_dev); +resource_size_t component_reg_phys; +struct acpi_pci_root *pci_root; +struct cxl_chbs_context ctx; +struct cxl_dport *dport; +struct cxl_port *port; +int rc; + +device_lock_assert (&cxl_root->port.dev); + pci_root =acpi_pci_find_root (hb->handle); + dport =cxl_find_dport_by_dev (root_port, bridge_dev); +if (!dport) { +dev_dbg (host,"Host bridge expected and not found\n" ); +return -ENODEV ; + } + +if (dport->rch) { +dev_info (bridge_dev,"host supports CXL (restricted)\n" ); +return 0 ; + } + + rc =cxl_get_chbs (&hb->dev, hb, &ctx); +if (rc) +return rc; + +if (ctx.cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) { +dev_warn (bridge_dev, +"CXL CHBS version mismatch, skip port registration\n" ); +return 0 ; + } + + component_reg_phys = ctx.base; +if (component_reg_phys !=CXL_RESOURCE_NONE ) +dev_dbg (&hb->dev,"CHBRC found for UID %lld: %pa\n" , + ctx.uid, &component_reg_phys); + + rc =devm_cxl_register_pci_bus (host, bridge_dev, pci_root->bus); +if (rc && rc != -EBUSY ) +return rc; + + port =devm_cxl_add_port (host, bridge_dev, component_reg_phys, dport); +if (IS_ERR (port)) +return PTR_ERR (port); + +dev_info (bridge_dev,"host supports CXL\n" ); + +return 0 ; +} +static const struct cxl_root_ops acpi_root_ops = { .qos_class = cxl_acpi_qos_class, + .setup_hostbridge_uport = cxl_acpi_setup_hostbridge_uport, };static void del_cxl_resource (struct resource *res)
@@ -466,16 +538,6 @@ __mock struct acpi_device *to_cxl_host_bridge(struct device *host,return NULL ; } -/* Note, @dev is used by mock_acpi_table_parse_cedt() */ -struct cxl_chbs_context { -struct device *dev; -unsigned long long uid; -resource_size_t base; -u32 cxl_version; -int nr_versions; -u32 saved_version; -}; -static int cxl_get_chbs_iter (union acpi_subtable_headers *header,void *arg,const unsigned long end) {
@@ -598,7 +660,7 @@ static int add_host_bridge_dport(struct device *match, void *arg)/* * In RCH mode, bind the component regs base to the dport. In * VH mode it will be bound to the CXL host bridge's port -* object later in add_host_bridge_uport(). +* object later in cxl_acpi_setup_hostbridge_uport(). */ if (ctx.cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) { dev_dbg(match, "RCRB found for UID %lld: %pa\n", ctx.uid,
@@ -620,22 +682,14 @@ static int add_host_bridge_dport(struct device *match, void *arg)return 0 ; } -/* -* A host bridge is a dport to a CFMWS decode and it is a uport to the -* dport (PCIe Root Ports) in the host bridge. -*/ -static int add_host_bridge_uport (struct device *match,void *arg) +static int set_cxl_root_to_hostbridge (struct device *match,void *arg) {struct cxl_port *root_port = arg;struct device *host = root_port->dev.parent;struct acpi_device *hb =to_cxl_host_bridge (host, match); -struct acpi_pci_root *pci_root;struct cxl_dport *dport; -struct cxl_port *port; +struct acpi_pci_root *pci_root;struct device *bridge; -struct cxl_chbs_context ctx; -resource_size_t component_reg_phys; -int rc;if (!hb)return 0 ;
@@ -648,37 +702,12 @@ static int add_host_bridge_uport(struct device *match, void *arg)return 0 ; } -if (dport->rch) { -dev_info (bridge,"host supports CXL (restricted)\n" ); +if (dport->rch)return 0 ; - } - rc =cxl_get_chbs (match, hb, &ctx); -if (rc) -return rc; - -if (ctx.cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) { -dev_warn (bridge, -"CXL CHBS version mismatch, skip port registration\n" ); -return 0 ; - } - - component_reg_phys = ctx.base; -if (component_reg_phys !=CXL_RESOURCE_NONE ) -dev_dbg (match,"CHBCR found for UID %lld: %pa\n" , - ctx.uid, &component_reg_phys); - - rc =devm_cxl_register_pci_bus (host, bridge, pci_root->bus); -if (rc) -return rc; - - port =devm_cxl_add_port (host, bridge, component_reg_phys, dport); -if (IS_ERR (port)) -return PTR_ERR (port); - -dev_info (bridge,"host supports CXL\n" ); - -return 0 ; + bridge = pci_root->bus->bridge; +return devm_cxl_register_hb_uport_root_port (host, bridge, +to_cxl_root (root_port)); }static int add_root_nvdimm_bridge (struct device *match,void *data)
@@ -852,6 +881,7 @@ static int cxl_acpi_probe(struct platform_device *pdev)return PTR_ERR (cxl_root); root_port = &cxl_root->port; +/* Root level scanned with host-bridge as dports */ rc =bus_for_each_dev (adev->dev.bus,NULL , root_port, add_host_bridge_dport);if (rc <0 )
@@ -880,12 +910,9 @@ static int cxl_acpi_probe(struct platform_device *pdev)*/ device_for_each_child (&root_port->dev, cxl_res, pair_cxl_resource); -/* -* Root level scanned with host-bridge as dports, now scan host-bridges -* for their role as CXL uports to their CXL-capable PCIe Root Ports. -*/ +/* Scan host-bridges and point the cxl root port struct to it */ rc =bus_for_each_dev (adev->dev.bus,NULL , root_port, - add_host_bridge_uport); + set_cxl_root_to_hostbridge);if (rc <0 )return rc;
drivers/cxl/core/port.c +84 -0
96 lines not on this page · raw message
drivers/cxl/cxl.h +2 -0
@@ -642,6 +642,8 @@ struct cxl_root_ops {int (*qos_class)(struct cxl_root *cxl_root,struct access_coordinate *coord,int entries,int *qos_class); +int (*setup_hostbridge_uport)(struct cxl_root *cxl_root, +struct device *bridge_dev); }; static inline struct cxl_dport *
Signature · 1 line
2.50.0
Re: [PATCH v6 09/10] cxl: Move enumeration of hostbridge ports to the memdev probe path
Quoted 19 lines · Dave Jiang
Current enuemration scheme in
cxl_acpimodule creates the ports under the root port by enumerating the hostbridges after the dports under the root port is created. However error messages "cxl portN: Couldn't locate the CXL.cache and CXL.mem capability array header" is observed when certain platform has PCIe hotplug option turned on in BIOS. If thecxl_acpimodule probe is running before the CXL link between the endpoint device and the RP is established, then the platform may not have exposed DVSEC ID 3 and/or DVSEC ID 7 blocks which will trigger the error message. This behavior is defined by the spec and not a hardware quirk.Setup an association in
cxl_portto tie the host bridge device to the associatedcxl_root. Thecxl_rootprovides a callback that's setup by thecxl_acpiprobe function in order to create a port per host bridge that was previously done duringcxl_acpiprobe. Add the calling of the callback indevm_cxl_enumerate_ports(). The observed behavior is that ports that are not connected to endpoint device(s) are no longer enumerated. This should also remove any excessive noise of port probe failing on those inactive ports.
Quoted 2 lines
Reviewed-by Jonathan Cameron <[email protected]>Signed-off-by Dave Jiang <[email protected]>
If devm_cxl_port_add_dport() can return an existent dport when found it in patch #4, this patch can remove all checkings for "PTR_ERR(dport) != -EEXIST" cases.
with that, you can add
Quoted 326 lines
---
v6:
- Deal with-EEXISToutput fordevm_cxl_port_add_dport()
- Set dport to NULL during declare. (Jonathan)--- drivers/cxl/acpi.c | 137 ++++++++++++++++++++++++---------------- drivers/cxl/core/port.c | 84 ++++++++++++++++++++++++ drivers/cxl/cxl.h | 2 + 3 files changed, 168 insertions(+), 55 deletions(-)drivers/cxl/acpi.c +82
-55@@ -296,8 +296,80 @@ static int cxl_acpi_qos_class(struct cxl_root *cxl_root,return cxl_acpi_evaluate_qtg_dsm (handle, coord, entries, qos_class); } +/* Note, @dev is used by mock_acpi_table_parse_cedt() */ +struct cxl_chbs_context { +struct device *dev; +unsigned long long uid; +resource_size_t base; +u32 cxl_version; +int nr_versions; +u32 saved_version; +}; + +static int cxl_get_chbs (struct device *dev,struct acpi_device *hb, +struct cxl_chbs_context *ctx); + +/* +* A host bridge is a dport to a CFMWS decoder and it is a uport to the +* dport (PCIe Root Ports) in the host bridge. +*/ +static int cxl_acpi_setup_hostbridge_uport (struct cxl_root *cxl_root, +struct device *bridge_dev) +{ +struct cxl_port *root_port = &cxl_root->port; +struct device *host = root_port->dev.parent; +struct acpi_device *hb =ACPI_COMPANION (bridge_dev); +resource_size_t component_reg_phys; +struct acpi_pci_root *pci_root; +struct cxl_chbs_context ctx; +struct cxl_dport *dport; +struct cxl_port *port; +int rc; + +device_lock_assert (&cxl_root->port.dev); + pci_root =acpi_pci_find_root (hb->handle); + dport =cxl_find_dport_by_dev (root_port, bridge_dev); +if (!dport) { +dev_dbg (host,"Host bridge expected and not found\n" ); +return -ENODEV ; + } + +if (dport->rch) { +dev_info (bridge_dev,"host supports CXL (restricted)\n" ); +return 0 ; + } + + rc =cxl_get_chbs (&hb->dev, hb, &ctx); +if (rc) +return rc; + +if (ctx.cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) { +dev_warn (bridge_dev, +"CXL CHBS version mismatch, skip port registration\n" ); +return 0 ; + } + + component_reg_phys = ctx.base; +if (component_reg_phys !=CXL_RESOURCE_NONE ) +dev_dbg (&hb->dev,"CHBRC found for UID %lld: %pa\n" , + ctx.uid, &component_reg_phys); + + rc =devm_cxl_register_pci_bus (host, bridge_dev, pci_root->bus); +if (rc && rc != -EBUSY ) +return rc; + + port =devm_cxl_add_port (host, bridge_dev, component_reg_phys, dport); +if (IS_ERR (port)) +return PTR_ERR (port); + +dev_info (bridge_dev,"host supports CXL\n" ); + +return 0 ; +} +static const struct cxl_root_ops acpi_root_ops = { .qos_class = cxl_acpi_qos_class, + .setup_hostbridge_uport = cxl_acpi_setup_hostbridge_uport, };static void del_cxl_resource (struct resource *res)@@ -466,16 +538,6 @@ __mock struct acpi_device *to_cxl_host_bridge(struct device *host,return NULL ; } -/* Note, @dev is used by mock_acpi_table_parse_cedt() */ -struct cxl_chbs_context { -struct device *dev; -unsigned long long uid; -resource_size_t base; -u32 cxl_version; -int nr_versions; -u32 saved_version; -}; -static int cxl_get_chbs_iter (union acpi_subtable_headers *header,void *arg,const unsigned long end) {@@ -598,7 +660,7 @@ static int add_host_bridge_dport(struct device *match, void *arg)/* * In RCH mode, bind the component regs base to the dport. In * VH mode it will be bound to the CXL host bridge's port -* object later in add_host_bridge_uport(). +* object later in cxl_acpi_setup_hostbridge_uport(). */ if (ctx.cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) { dev_dbg(match, "RCRB found for UID %lld: %pa\n", ctx.uid,@@ -620,22 +682,14 @@ static int add_host_bridge_dport(struct device *match, void *arg)return 0 ; } -/* -* A host bridge is a dport to a CFMWS decode and it is a uport to the -* dport (PCIe Root Ports) in the host bridge. -*/ -static int add_host_bridge_uport (struct device *match,void *arg) +static int set_cxl_root_to_hostbridge (struct device *match,void *arg) {struct cxl_port *root_port = arg;struct device *host = root_port->dev.parent;struct acpi_device *hb =to_cxl_host_bridge (host, match); -struct acpi_pci_root *pci_root;struct cxl_dport *dport; -struct cxl_port *port; +struct acpi_pci_root *pci_root;struct device *bridge; -struct cxl_chbs_context ctx; -resource_size_t component_reg_phys; -int rc;if (!hb)return 0 ;@@ -648,37 +702,12 @@ static int add_host_bridge_uport(struct device *match, void *arg)return 0 ; } -if (dport->rch) { -dev_info (bridge,"host supports CXL (restricted)\n" ); +if (dport->rch)return 0 ; - } - rc =cxl_get_chbs (match, hb, &ctx); -if (rc) -return rc; - -if (ctx.cxl_version ==ACPI_CEDT_CHBS_VERSION_CXL11 ) { -dev_warn (bridge, -"CXL CHBS version mismatch, skip port registration\n" ); -return 0 ; - } - - component_reg_phys = ctx.base; -if (component_reg_phys !=CXL_RESOURCE_NONE ) -dev_dbg (match,"CHBCR found for UID %lld: %pa\n" , - ctx.uid, &component_reg_phys); - - rc =devm_cxl_register_pci_bus (host, bridge, pci_root->bus); -if (rc) -return rc; - - port =devm_cxl_add_port (host, bridge, component_reg_phys, dport); -if (IS_ERR (port)) -return PTR_ERR (port); - -dev_info (bridge,"host supports CXL\n" ); - -return 0 ; + bridge = pci_root->bus->bridge; +return devm_cxl_register_hb_uport_root_port (host, bridge, +to_cxl_root (root_port)); }static int add_root_nvdimm_bridge (struct device *match,void *data)@@ -852,6 +881,7 @@ static int cxl_acpi_probe(struct platform_device *pdev)return PTR_ERR (cxl_root); root_port = &cxl_root->port; +/* Root level scanned with host-bridge as dports */ rc =bus_for_each_dev (adev->dev.bus,NULL , root_port, add_host_bridge_dport);if (rc <0 )@@ -880,12 +910,9 @@ static int cxl_acpi_probe(struct platform_device *pdev)*/ device_for_each_child (&root_port->dev, cxl_res, pair_cxl_resource); -/* -* Root level scanned with host-bridge as dports, now scan host-bridges -* for their role as CXL uports to their CXL-capable PCIe Root Ports. -*/ +/* Scan host-bridges and point the cxl root port struct to it */ rc =bus_for_each_dev (adev->dev.bus,NULL , root_port, - add_host_bridge_uport); + set_cxl_root_to_hostbridge);if (rc <0 )return rc;drivers/cxl/core/port.c +84
-0@@ -1805,6 +1805,86 @@ static int add_port_attach_ep(struct cxl_memdev *cxlmd,#define CXL_ITER_LEVEL_SWITCH 1 +static int get_hostbridge_port_devices (struct cxl_memdev *cxlmd, +struct device **hb_uport_dev, +struct device **hb_dport_dev) +{ +struct device *dev = &cxlmd->dev; +struct device *iter; + +for (iter = dev; iter; iter =grandparent (iter)) { +struct device *dport_dev =grandparent (iter); +struct device *uport_dev = dport_dev->parent; + +if (is_cxl_hierarchy_head (uport_dev->parent)) { + *hb_uport_dev = uport_dev; + *hb_dport_dev = dport_dev; +return 0 ; + } + } + +return -ENODEV ; +} + +static int cxl_hostbridge_port_setup (struct cxl_memdev *cxlmd) +{ +struct device *hb_uport_dev, *hb_dport_dev; +struct cxl_dport *dport =NULL ; +int rc; + + rc =get_hostbridge_port_devices (cxlmd, &hb_uport_dev, &hb_dport_dev); +if (rc) +return -ENODEV ; + + struct cxl_root *cxl_root __free(put_cxl_root) = +cxl_hb_uport_dev_to_root (hb_uport_dev); +if (!cxl_root) +return -ENODEV ; + +guard (device)(&cxl_root->port.dev); + struct cxl_port *port __free(put_cxl_port) = +find_cxl_port (hb_dport_dev, &dport); +if (!port) + port =find_cxl_port_by_uport (hb_uport_dev); + +/* Port already established, add the associated dport if needed. */ +if (port) { +if (dport) +return 0 ; + +guard (device)(&port->dev); + dport =devm_cxl_port_add_dport (port, hb_dport_dev); +if (IS_ERR (dport) &&PTR_ERR (dport) != -EEXIST ) { +dev_dbg (&cxlmd->dev, +"failed to add dport %s to port %s: %ld\n" , +dev_name (hb_dport_dev),dev_name (&port->dev), +PTR_ERR (dport)); +return PTR_ERR (dport); + } +return 0 ; + } + +/* No port found, setup a port via the root port ops */ +if (!cxl_root->ops || !cxl_root->ops->setup_hostbridge_uport) +return -EOPNOTSUPP ; + + rc = cxl_root->ops->setup_hostbridge_uport (cxl_root, hb_uport_dev); +if (rc) +return rc; + +/* Add the dport that goes with the newly created port */ + dport =devm_cxl_add_dport_by_uport (hb_uport_dev, hb_dport_dev); +if (IS_ERR (dport) &&PTR_ERR (dport) != -EEXIST ) { +dev_dbg (&cxlmd->dev, +"failed to add dport %s to port %s: %ld\n" , +dev_name (hb_dport_dev),dev_name (&cxl_root->port.dev), +PTR_ERR (dport)); +return PTR_ERR (dport); + } + +return 0 ; +} +int devm_cxl_enumerate_ports (struct cxl_memdev *cxlmd) {struct device *dev = &cxlmd->dev;@@ -1819,6 +1899,10 @@ int devm_cxl_enumerate_ports(struct cxl_memdev *cxlmd)if (cxlmd->cxlds->rcd)return 0 ; + rc =cxl_hostbridge_port_setup (cxlmd); +if (rc) +return rc; + rc =devm_add_action_or_reset (&cxlmd->dev, cxl_detach_ep, cxlmd);if (rc)return rc;drivers/cxl/cxl.h +2
-0@@ -642,6 +642,8 @@ struct cxl_root_ops {int (*qos_class)(struct cxl_root *cxl_root,struct access_coordinate *coord,int entries,int *qos_class); +int (*setup_hostbridge_uport)(struct cxl_root *cxl_root, +struct device *bridge_dev); }; static inline struct cxl_dport *
Dave Jiang
maintainerPATCH v6 10/10 cxl: Remove devm_cxl_port_enumerate_dports() that is no longer used
In reply to Dave JiangDelete function devm_cxl_port_enumerate_dports() which is no longer being used anywhere. Also remove cxl_test support.
--- drivers/cxl/core/pci.c | 87 ++++------------------------------- drivers/cxl/cxlpci.h | 1 - tools/testing/cxl/Kbuild | 1 - tools/testing/cxl/test/cxl.c | 31 ------------- tools/testing/cxl/test/mock.c | 15 ------ tools/testing/cxl/test/mock.h | 1 - 6 files changed, 8 insertions(+), 128 deletions(-)
drivers/cxl/core/pci.c +8 -79
@@ -63,85 +63,6 @@ struct cxl_dport *__devm_cxl_add_dport_by_dev(struct cxl_port *port, }EXPORT_SYMBOL_NS_GPL (__devm_cxl_add_dport_by_dev,"CXL" ); -struct cxl_walk_context { -struct pci_bus *bus; -struct cxl_port *port; -int type; -int error; -int count; -}; - -static int match_add_dports (struct pci_dev *pdev,void *data) -{ -struct cxl_walk_context *ctx = data; -struct cxl_port *port = ctx->port; -int type =pci_pcie_type (pdev); -struct cxl_register_map map; -struct cxl_dport *dport; -u32 lnkcap, port_num; -int rc; - -if (pdev->bus != ctx->bus) -return 0 ; -if (!pci_is_pcie (pdev)) -return 0 ; -if (type != ctx->type) -return 0 ; -if (pci_read_config_dword (pdev,pci_pcie_cap (pdev) +PCI_EXP_LNKCAP , - &lnkcap)) -return 0 ; - - rc =cxl_find_regblock (pdev,CXL_REGLOC_RBI_COMPONENT , &map); -if (rc) -dev_dbg (&port->dev,"failed to find component registers\n" ); - - port_num =FIELD_GET (PCI_EXP_LNKCAP_PN , lnkcap); - dport =devm_cxl_add_dport (port, &pdev->dev, port_num, map.resource); -if (IS_ERR (dport)) { - ctx->error =PTR_ERR (dport); -return PTR_ERR (dport); - } - ctx->count++; - -return 0 ; -} - -/** -* devm_cxl_port_enumerate_dports - enumerate downstream ports of the upstream port -* @port: cxl_port whose ->uport_dev is the upstream of dports to be enumerated -* -* Returns a positive number of dports enumerated or a negative error -* code. -*/ -int devm_cxl_port_enumerate_dports (struct cxl_port *port) -{ -struct pci_bus *bus =cxl_port_to_pci_bus (port); -struct cxl_walk_context ctx; -int type; - -if (!bus) -return -ENXIO ; - -if (pci_is_root_bus (bus)) - type =PCI_EXP_TYPE_ROOT_PORT ; -else - type =PCI_EXP_TYPE_DOWNSTREAM ; - - ctx = (struct cxl_walk_context ) { - .port = port, - .bus = bus, - .type = type, - }; -pci_walk_bus (bus, match_add_dports, &ctx); - -if (ctx.count ==0 ) -return -ENODEV ; -if (ctx.error) -return ctx.error; -return ctx.count; -} -EXPORT_SYMBOL_NS_GPL (devm_cxl_port_enumerate_dports,"CXL" ); -static int cxl_dvsec_mem_range_valid (struct cxl_dev_state *cxlds,int id) {struct pci_dev *pdev =to_pci_dev (cxlds->dev);
@@ -1209,6 +1130,14 @@ int cxl_gpf_port_setup(struct cxl_dport *dport)return 0 ; } +struct cxl_walk_context { +struct pci_bus *bus; +struct cxl_port *port; +int type; +int error; +int count; +}; +static int match_dport (struct pci_dev *pdev,void *data) {struct cxl_walk_context *ctx = data;
drivers/cxl/cxlpci.h +0 -1
@@ -127,7 +127,6 @@ static inline bool cxl_pci_flit_256(struct pci_dev *pdev)return lnksta2 &PCI_EXP_LNKSTA2_FLIT ; } -int devm_cxl_port_enumerate_dports (struct cxl_port *port);struct cxl_dev_state ;int cxl_hdm_decode_init (struct cxl_dev_state *cxlds,struct cxl_hdm *cxlhdm,struct cxl_endpoint_dvsec_info *info);
tools/testing/cxl/Kbuild +0 -1
@@ -4,7 +4,6 @@ ldflags-y += --wrap=is_acpi_device_node ldflags-y += --wrap=acpi_evaluate_integer ldflags-y += --wrap=acpi_pci_find_root ldflags-y += --wrap=nvdimm_bus_register -ldflags-y += --wrap=devm_cxl_port_enumerate_dports ldflags-y += --wrap=cxl_port_update_total_dports ldflags-y += --wrap=devm_cxl_setup_hdm ldflags-y += --wrap=devm_cxl_add_passthrough_decoder
tools/testing/cxl/test/cxl.c +0 -31
@@ -996,36 +996,6 @@ static int mock_cxl_port_update_total_dports(struct cxl_port *port)return 0 ; } -static int mock_cxl_port_enumerate_dports (struct cxl_port *port) -{ -struct platform_device **array; -int rc, i, array_size; - - rc =get_port_array (port, &array, &array_size); -if (rc) -return rc; - -for (i =0 ; i < array_size; i++) { -struct platform_device *pdev = array[i]; -struct cxl_dport *dport; - -if (pdev->dev.parent != port->uport_dev) { -dev_dbg (&port->dev,"%s: mismatch parent %s\n" , -dev_name (port->uport_dev), -dev_name (pdev->dev.parent)); -continue ; - } - - dport =devm_cxl_add_dport (port, &pdev->dev, pdev->id, -CXL_RESOURCE_NONE ); - -if (IS_ERR (dport)) -return PTR_ERR (dport); - } - -return 0 ; -} -static struct cxl_dport *mock_cxl_add_dport_by_dev (struct cxl_port *port,struct device *dport_dev) {
@@ -1112,7 +1082,6 @@ static struct cxl_mock_ops cxl_mock_ops = { .acpi_table_parse_cedt = mock_acpi_table_parse_cedt, .acpi_evaluate_integer = mock_acpi_evaluate_integer, .acpi_pci_find_root = mock_acpi_pci_find_root, - .devm_cxl_port_enumerate_dports = mock_cxl_port_enumerate_dports, .cxl_port_update_total_dports = mock_cxl_port_update_total_dports, .devm_cxl_setup_hdm = mock_cxl_setup_hdm, .devm_cxl_add_passthrough_decoder = mock_cxl_add_passthrough_decoder,
tools/testing/cxl/test/mock.c +0 -15
@@ -188,21 +188,6 @@ int __wrap_devm_cxl_enumerate_decoders(struct cxl_hdm *cxlhdm, }EXPORT_SYMBOL_NS_GPL (__wrap_devm_cxl_enumerate_decoders,"CXL" ); -int __wrap_devm_cxl_port_enumerate_dports (struct cxl_port *port) -{ -int rc, index; -struct cxl_mock_ops *ops =get_cxl_mock_ops (&index); - -if (ops && ops->is_mock_port (port->uport_dev)) - rc = ops->devm_cxl_port_enumerate_dports (port); -else - rc =devm_cxl_port_enumerate_dports (port); -put_cxl_mock_ops (index); - -return rc; -} -EXPORT_SYMBOL_NS_GPL (__wrap_devm_cxl_port_enumerate_dports,"CXL" ); -int __wrap_cxl_port_update_total_dports (struct cxl_port *port) {int rc, index;
tools/testing/cxl/test/mock.h +0 -1
@@ -19,7 +19,6 @@ struct cxl_mock_ops {bool (*is_mock_bus)(struct pci_bus *bus);bool (*is_mock_port)(struct device *dev);bool (*is_mock_dev)(struct device *dev); -int (*devm_cxl_port_enumerate_dports)(struct cxl_port *port);int (*cxl_port_update_total_dports)(struct cxl_port *port);struct cxl_hdm *(*devm_cxl_setup_hdm)(struct cxl_port *port,struct cxl_endpoint_dvsec_info *info);
Signature · 1 line
2.50.0
Re: [PATCH v6 10/10] cxl: Remove devm_cxl_port_enumerate_dports() that is no longer used
Quoted 5 lines · Dave Jiang
Delete function
devm_cxl_port_enumerate_dports()which is no longer being used anywhere. Also removecxl_testsupport.Reviewed-by Jonathan Cameron <[email protected]>Signed-off-by Dave Jiang <[email protected]>
[snip]