Skip to contentSkip to conversation

platform/x86: dell-lis3lv02d: Add Precision 3551

PATCH In review Jan-Niklas Burfeind 3 participants 3 messages Jul 10, 2025 – Jul 11, 2025 x86 platform drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 platform/x86: dell-lis3lv02d: Add Precision 3551

This marks 0x29 as accelerometer address on Dell Precision 3551.

I followed previous works of Paul Menzel and Hans de Goede to verify it:

$ cd /sys/bus/pci/drivers/i801_smbus/0000\:00\:1f.4
$ ls -d i2c-?
i2c-0
$ sudo modprobe i2c-dev
$ sudo i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x08-0x77.
Continue? [Y/n] Y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:                         08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- --
30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
$ echo lis3lv02d 0x29 > sudo tee /sys/bus/i2c/devices/i2c-0/new_device
lis3lv02d 0x29
$ sudo dmesg
[    0.000000] Linux version 6.12.28 (nixbld@localhost) (gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP PREEMPT_DYNAMIC Fri May  9 07:50:53 UTC 2025
[...]
[    0.000000] DMI: Dell Inc. Precision 3551/07YHW8, BIOS 1.18.0 10/03/2022
[...]
[ 3749.077624] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator
[ 3749.077732] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator
[ 3749.098674] lis3lv02d: 8 bits 3DC sensor found
[ 3749.182480] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input28
[ 3749.182899] i2c i2c-0: new_device: Instantiated device lis3lv02d at 0x29
---
 drivers/platform/x86/dell/dell-lis3lv02d.c | 1 +
 1 file changed, 1 insertion(+)
drivers/platform/x86/dell/dell-lis3lv02d.c +1 -0
index 0791118dd6b7..732de5f556f8 100644
@@ -49,6 +49,7 @@ static const struct dmi_system_id lis3lv02d_devices[] __initconst = {
 	DELL_LIS3LV02D_DMI_ENTRY("Latitude E6330",     0x29),
 	DELL_LIS3LV02D_DMI_ENTRY("Latitude E6430",     0x29),
 	DELL_LIS3LV02D_DMI_ENTRY("Precision 3540",     0x29),
+	DELL_LIS3LV02D_DMI_ENTRY("Precision 3551",     0x29),
 	DELL_LIS3LV02D_DMI_ENTRY("Precision M6800",    0x29),
 	DELL_LIS3LV02D_DMI_ENTRY("Vostro V131",        0x1d),
 	DELL_LIS3LV02D_DMI_ENTRY("Vostro 5568",        0x29),
Signature · 1 line
2.49.0
Reviewed-by on v1 1/1
#1 lore raw

Dear Jan-Niklas,

Thank you for your patch.

Am 10.07.25 um 21:09 schrieb Jan-Niklas Burfeind:

Quoted 50 lines

This marks 0x29 as accelerometer address on Dell Precision 3551.

I followed previous works of Paul Menzel and Hans de Goede to verify it:

$ cd /sys/bus/pci/drivers/i801_smbus/0000\:00\:1f.4
$ ls -d i2c-?
i2c-0
$ sudo modprobe i2c-dev
$ sudo i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x08-0x77.
Continue? [Y/n] Y
      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:                         08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- 29 -- -- -- -- -- --
30: 30 -- -- -- -- 35 UU UU -- -- -- -- -- -- -- --
40: -- -- -- -- 44 -- -- -- -- -- -- -- -- -- -- --
50: UU -- 52 -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
$ echo lis3lv02d 0x29 > sudo tee /sys/bus/i2c/devices/i2c-0/new_device
lis3lv02d 0x29
$ sudo dmesg
[    0.000000] Linux version 6.12.28 (nixbld@localhost) (gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #1-NixOS SMP PREEMPT_DYNAMIC Fri May  9 07:50:53 UTC 2025
[...]
[    0.000000] DMI: Dell Inc. Precision 3551/07YHW8, BIOS 1.18.0 10/03/2022
[...]
[ 3749.077624] lis3lv02d_i2c 0-0029: supply Vdd not found, using dummy regulator
[ 3749.077732] lis3lv02d_i2c 0-0029: supply Vdd_IO not found, using dummy regulator
[ 3749.098674] lis3lv02d: 8 bits 3DC sensor found
[ 3749.182480] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input28
[ 3749.182899] i2c i2c-0: new_device: Instantiated device lis3lv02d at 0x29
---
  drivers/platform/x86/dell/dell-lis3lv02d.c | 1 +
  1 file changed, 1 insertion(+)
drivers/platform/x86/dell/dell-lis3lv02d.c +0 -0
index 0791118dd6b7..732de5f556f8 100644

drivers/platform/x86/dell/dell-lis3lv02d.c static const struct dmi_system_id lis3lv02d_devices[] __initconst = { · line 55

Quoted 7 lines
drivers/platform/x86/dell/dell-lis3lv02d.c +1 -0
@@ -49,6 +49,7 @@ static const struct dmi_system_id lis3lv02d_devices[] __initconst = {
  	DELL_LIS3LV02D_DMI_ENTRY("Latitude E6330",     0x29),
  	DELL_LIS3LV02D_DMI_ENTRY("Latitude E6430",     0x29),
  	DELL_LIS3LV02D_DMI_ENTRY("Precision 3540",     0x29),
+	DELL_LIS3LV02D_DMI_ENTRY("Precision 3551",     0x29),
  	DELL_LIS3LV02D_DMI_ENTRY("Precision M6800",    0x29),
  	DELL_LIS3LV02D_DMI_ENTRY("Vostro V131",        0x1d),
  	DELL_LIS3LV02D_DMI_ENTRY("Vostro 5568",        0x29),

Kind regards,

Paul

PS: Just a heads-up, that you have a DMARC policy set:

    $ dig txt _dmarc.aiyionpri.me +short
    "v=DMARC1;p=reject;"

I believe STRATO enabled this for all their customers, breaking deliveries for addressees enforcing the DMARC policy, as you do not have any SPF entries for example [1]. I recommend to deactivate the setting by selecting *Keine STRATO-DMARC-Regel* [2], and to look for another provider, as their support was not helpful at all and did not even understand the problem, and hasn’t replied to my latest response in several weeks. (And I didn’t get the initial emails informing about the change.)

[1]: https://www.borncity.com/blog/2025/06/06/strato-aktiviert-automatisch-eine-dmarc-pruefung-fuer-mails/
[2]: https://www.strato.de/faq/hosting/dmarc-bei-strato-aktivieren/

maintainer
#2 lore raw
In reply to Jan-Niklas Burfeind
Quoted 10 lines · Jan-Niklas Burfeind

This marks 0x29 as accelerometer address on Dell Precision 3551.

I followed previous works of Paul Menzel and Hans de Goede to verify it:

$ cd /sys/bus/pci/drivers/i801_smbus/0000\:00\:1f.4
$ ls -d i2c-?
i2c-0

[...]

Thank you for your contribution, it has been applied to my local review-ilpo-fixes branch. Note it will show up in the public platform-drivers-x86/review-ilpo-fixes branch only once I've pushed my local branch there, which might take a while.

The list of commits applied:
[1/1] platform/x86: dell-lis3lv02d: Add Precision 3551

      commit: aef9da333823f70b074e36a94c6e85f5c55e5477

--
i.