configs/imx6ulz_smm_m2b_defconfig: Enable clock framework
PATCH 1/2 configs/imx6ulz_smm_m2b_defconfig: Enable clock framework
Enable the clock framework on the m2b platform as was done in m2 variant. This helps to increase the NAND controller performance.
---
configs/imx6ulz_smm_m2b_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/imx6ulz_smm_m2b_defconfig +2 -0
@@ -44,6 +44,8 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_ENV_RELOC_GD_ENV_ADDR=y CONFIG_NO_NET=y CONFIG_BOUNCE_BUFFER=y +CONFIG_CLK_COMPOSITE_CCF=y +CONFIG_CLK_IMX6UL=y CONFIG_USB_FUNCTION_FASTBOOT=y CONFIG_FASTBOOT_BUF_ADDR=0x82000000 CONFIG_FASTBOOT_FLASH=y
Signature · 3 lines
2.43.0 base-commit: b379335f141e3ddca0cdbb5d9d39af0444530542
PATCH 2/2 configs: imx6ulz_smm_m2b: Add board watchdog reset configuration
Add the configuration that allow to reset the board from reset cmd
---
configs/imx6ulz_smm_m2b_defconfig | 3 +++ 1 file changed, 3 insertions(+)
configs/imx6ulz_smm_m2b_defconfig +3 -0
@@ -67,6 +67,8 @@ CONFIG_DM_PMIC=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_MXC_UART=y +CONFIG_SYSRESET=y +CONFIG_SYSRESET_WATCHDOG=y CONFIG_IMX_THERMAL=y CONFIG_USB=y CONFIG_SPL_USB_HOST=y
@@ -78,3 +80,4 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_SDP_LOADADDR=0x877fffc0 CONFIG_SPL_USB_SDP_SUPPORT=y +CONFIG_IMX_WATCHDOG=y
Signature · 3 lines
2.43.0 base-commit: b379335f141e3ddca0cdbb5d9d39af0444530542
Re: [PATCH 2/2] configs: imx6ulz_smm_m2b: Add board watchdog reset configuration
Quoted 5 lines · Michael Trimarchi
Add the configuration that allow to reset the board from reset cmd
Signed-off-by Michael Trimarchi <[email protected]>
Applied both, thanks.
Re: [PATCH 2/2] configs: imx6ulz_smm_m2b: Add board watchdog reset configuration
In reply to Michael TrimarchiQuoted 6 lines · Michael Trimarchi
Add the configuration that allow to reset the board from reset cmd
Signed-off-by Michael Trimarchi <[email protected]>---
Quoted 4 lines · Michael Trimarchi
Enable the clock framework on the m2b platform as was done in m2 variant. This helps to increase the NAND controller performance.
Signed-off-by Michael Trimarchi <[email protected]>
As I understand, assigned-clocks will set a higher freq, so performance improves.