Skip to contentSkip to conversation

um: Remove userspace_pid[]

PATCH In review Tiwei Bie 2 participants 6 messages Jul 11, 2025

Subsystems (2)
lore
Share & tools
lore

Tiwei Bie

author
#0 lore raw

v2 cover um: Remove userspace_pid[]

From: Tiwei Bie <[email protected]>

v2:
- Remove all declarations of userspace_pid[] from .h and .c files;
- Update the reference to userspace_pid[] in the comment;

v1:
https://lore.kernel.org/linux-um/[email protected]/

Tiwei Bie (3):
um: Use err consistently in userspace()
um: Remove the pid parameter of handle_trap()
um: Stop tracking stub's PID via userspace_pid[]

 arch/um/include/asm/mmu_context.h   |  9 +-------
 arch/um/include/shared/skas/mm_id.h |  2 --
 arch/um/include/shared/skas/skas.h  |  1 -
 arch/um/kernel/exec.c               |  2 --
 arch/um/kernel/skas/process.c       |  2 --
 arch/um/os-Linux/skas/process.c     | 33 ++++++++++++-----------------
 arch/x86/um/tls_32.c                |  2 +-
 7 files changed, 16 insertions(+), 35 deletions(-)
Signature · 1 line
2.34.1
author
#1 lore raw

PATCH v2 1/3 um: Use err consistently in userspace()

From: Tiwei Bie <[email protected]>

Avoid declaring a new variable 'ret' inside the 'if (using_seccomp)' block, as the existing 'err' variable declared at the top of the function already serves the same purpose.

---
 arch/um/os-Linux/skas/process.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
arch/um/os-Linux/skas/process.c +6 -7
index e42ffac23e3c..2de7fbc6eb23 100644
@@ -592,12 +592,11 @@ void userspace(struct uml_pt_regs *regs)
 		if (using_seccomp) {
 			struct mm_id *mm_id = current_mm_id();
 			struct stub_data *proc_data = (void *) mm_id->stack;
-			int ret;
 
-			ret = set_stub_state(regs, proc_data, singlestepping());
-			if (ret) {
+			err = set_stub_state(regs, proc_data, singlestepping());
+			if (err) {
 				printk(UM_KERN_ERR "%s - failed to set regs: %d",
-				       __func__, ret);
+				       __func__, err);
 				fatal_sigsegv();
 			}
 
@@ -623,10 +622,10 @@ void userspace(struct uml_pt_regs *regs)
 			mm_id->syscall_data_len = 0;
 			mm_id->syscall_fd_num = 0;
 
-			ret = get_stub_state(regs, proc_data, NULL);
-			if (ret) {
+			err = get_stub_state(regs, proc_data, NULL);
+			if (err) {
 				printk(UM_KERN_ERR "%s - failed to get regs: %d",
-				       __func__, ret);
+				       __func__, err);
 				fatal_sigsegv();
 			}
 
Signature · 1 line
2.34.1
author
#2 lore raw

PATCH v2 2/3 um: Remove the pid parameter of handle_trap()

In reply to Tiwei Bie

From: Tiwei Bie <[email protected]>

It's no longer used. Remove it.

---
 arch/um/os-Linux/skas/process.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/um/os-Linux/skas/process.c +2 -2
index 2de7fbc6eb23..e90a0658bba8 100644
@@ -267,7 +267,7 @@ static void get_skas_faultinfo(int pid, struct faultinfo *fi)
 	memcpy(fi, (void *)current_stub_stack(), sizeof(*fi));
 }
 
-static void handle_trap(int pid, struct uml_pt_regs *regs)
+static void handle_trap(struct uml_pt_regs *regs)
 {
 	if ((UPT_IP(regs) >= STUB_START) && (UPT_IP(regs) < STUB_END))
 		fatal_sigsegv();
@@ -755,7 +755,7 @@ void userspace(struct uml_pt_regs *regs)
 				handle_syscall(regs);
 				break;
 			case SIGTRAP + 0x80:
-				handle_trap(pid, regs);
+				handle_trap(regs);
 				break;
 			case SIGTRAP:
 				relay_signal(SIGTRAP, (struct siginfo *)si, regs, NULL);
Signature · 1 line
2.34.1
author
#3 lore raw

PATCH v2 3/3 um: Stop tracking stub's PID via userspace_pid[]

In reply to Tiwei Bie

From: Tiwei Bie <[email protected]>

The PID of the stub process can be obtained from current_mm_id(). There is no need to track it via userspace_pid[]. Stop doing that to simplify the code.

---
 arch/um/include/asm/mmu_context.h   |  9 +--------
 arch/um/include/shared/skas/mm_id.h |  2 --
 arch/um/include/shared/skas/skas.h  |  1 -
 arch/um/kernel/exec.c               |  2 --
 arch/um/kernel/skas/process.c       |  2 --
 arch/um/os-Linux/skas/process.c     | 16 ++++++----------
 arch/x86/um/tls_32.c                |  2 +-
 7 files changed, 8 insertions(+), 26 deletions(-)
arch/um/include/asm/mmu_context.h +1 -8
index 23dcc914d44e..0bbb24868557 100644
@@ -16,11 +16,6 @@
 #define activate_mm activate_mm
 static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
 {
-	/*
-	 * This is called by fs/exec.c and sys_unshare()
-	 * when the new ->mm is used for the first time.
-	 */
-	__switch_mm(&new->context.id);
 }
 
 static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, 
@@ -28,11 +23,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {
 	unsigned cpu = smp_processor_id();
 
-	if(prev != next){
+	if (prev != next) {
 		cpumask_clear_cpu(cpu, mm_cpumask(prev));
 		cpumask_set_cpu(cpu, mm_cpumask(next));
-		if(next != &init_mm)
-			__switch_mm(&next->context.id);
 	}
 }
 
arch/um/include/shared/skas/mm_id.h +0 -2
index 89df9a55fbea..4f977ef5dda5 100644
@@ -19,8 +19,6 @@ struct mm_id {
 	int syscall_fd_map[STUB_MAX_FDS];
 };
 
-void __switch_mm(struct mm_id *mm_idp);
-
 void notify_mm_kill(int pid);
 
 #endif
arch/um/include/shared/skas/skas.h +0 -1
index 7d1de4cab551..807514e10538 100644
@@ -9,7 +9,6 @@
 #include <sysdep/ptrace.h>
 
 extern int using_seccomp;
-extern int userspace_pid[];
 
 extern void new_thread_handler(void);
 extern void handle_syscall(struct uml_pt_regs *regs);
arch/um/kernel/exec.c +0 -2
index cb8b5cd9285c..13812fa97eee 100644
@@ -26,8 +26,6 @@ void flush_thread(void)
 
 	get_safe_registers(current_pt_regs()->regs.gp,
 			   current_pt_regs()->regs.fp);
-
-	__switch_mm(&current->mm->context.id);
 }
 
 void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp)
arch/um/kernel/skas/process.c +0 -2
index 05dcdc057af9..5881b17eb987 100644
@@ -26,8 +26,6 @@ static int __init start_kernel_proc(void *unused)
 	return 0;
 }
 
-extern int userspace_pid[];
-
 static char cpu0_irqstack[THREAD_SIZE] __aligned(THREAD_SIZE);
 
 int __init start_uml(void)
arch/um/os-Linux/skas/process.c +6 -10
index e90a0658bba8..702ff2aeb32a 100644
@@ -434,7 +434,6 @@ static int __init init_stub_exe_fd(void)
 __initcall(init_stub_exe_fd);
 
 int using_seccomp;
-int userspace_pid[NR_CPUS];
 
 /**
  * start_userspace() - prepare a new userspace process
@@ -553,7 +552,7 @@ extern unsigned long tt_extra_sched_jiffies;
 
 void userspace(struct uml_pt_regs *regs)
 {
-	int err, status, op, pid = userspace_pid[0];
+	int err, status, op;
 	siginfo_t si_ptrace;
 	siginfo_t *si;
 	int sig;
@@ -562,6 +561,8 @@ void userspace(struct uml_pt_regs *regs)
 	interrupt_end();
 
 	while (1) {
+		struct mm_id *mm_id = current_mm_id();
+
 		/*
 		 * When we are in time-travel mode, userspace can theoretically
 		 * do a *lot* of work without being scheduled. The problem with
@@ -590,7 +591,6 @@ void userspace(struct uml_pt_regs *regs)
 		current_mm_sync();
 
 		if (using_seccomp) {
-			struct mm_id *mm_id = current_mm_id();
 			struct stub_data *proc_data = (void *) mm_id->stack;
 
 			err = set_stub_state(regs, proc_data, singlestepping());
@@ -644,8 +644,10 @@ void userspace(struct uml_pt_regs *regs)
 				GET_FAULTINFO_FROM_MC(regs->faultinfo, mcontext);
 			}
 		} else {
+			int pid = mm_id->pid;
+
 			/* Flush out any pending syscalls */
-			err = syscall_stub_flush(current_mm_id());
+			err = syscall_stub_flush(mm_id);
 			if (err) {
 				if (err == -ENOMEM)
 					report_enomem();
@@ -776,7 +778,6 @@ void userspace(struct uml_pt_regs *regs)
 				       __func__, sig);
 				fatal_sigsegv();
 			}
-			pid = userspace_pid[0];
 			interrupt_end();
 
 			/* Avoid -ERESTARTSYS handling in host */
@@ -901,8 +902,3 @@ void reboot_skas(void)
 	block_signals_trace();
 	UML_LONGJMP(&initial_jmpbuf, noreboot ? INIT_JMP_HALT : INIT_JMP_REBOOT);
 }
-
-void __switch_mm(struct mm_id *mm_idp)
-{
-	userspace_pid[0] = mm_idp->pid;
-}
arch/x86/um/tls_32.c +1 -1
index cb3f17627d16..1909c2e640b2 100644
@@ -186,7 +186,7 @@ int arch_switch_tls(struct task_struct *to)
 	/*
 	 * We have no need whatsoever to switch TLS for kernel threads; beyond
 	 * that, that would also result in us calling os_set_thread_area with
-	 * userspace_pid[cpu] == 0, which gives an error.
+	 * task->mm == NULL, which would cause a crash.
 	 */
 	if (likely(to->mm))
 		return load_TLS(O_FORCE, to);
Signature · 1 line
2.34.1
maintainer
#4 lore raw

Re: [PATCH v2 3/3] um: Stop tracking stub's PID via userspace_pid[]

Quoted 5 lines · Tiwei Bie

From: Tiwei Bie <[email protected]>

The PID of the stub process can be obtained from current_mm_id(). There is no need to track it via userspace_pid[]. Stop doing that to simplify the code.

So that is really obvious cleanups, and I can go apply them on that grounds, but I started wondering if we're not separately being inconsistent here, which perhaps didn't matter due to non-SMP:

arch/um/include/asm/mmu_context.h line 19

Quoted 9 lines

#define activate_mm activate_mm
static inline void activate_mm(struct mm_struct *old, struct mm_struct *new) {

arch/um/include/asm/mmu_context.h +0 -5
-	/*
-	 * This is called by fs/exec.c and sys_unshare()
-	 * when the new ->mm is used for the first time.
-	 */
-	__switch_mm(&new->context.id);
 }

This is now empty, so I wondered if we can just remove it _entirely_.

But the generic version calls switch_mm():

arch/um/include/asm/mmu_context.h static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, · line 30

Quoted 13 lines

static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,

arch/um/include/asm/mmu_context.h +1 -3
@@ -28,11 +23,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {
 	unsigned cpu = smp_processor_id();
 
-	if(prev != next){
+	if (prev != next) {
 		cpumask_clear_cpu(cpu, mm_cpumask(prev));
 		cpumask_set_cpu(cpu, mm_cpumask(next));
-		if(next != &init_mm)
-			__switch_mm(&next->context.id);
 	}
 }

which plays with the CPU mask, but realistically being non-SMP the CPU mask is never really used?

Certainly removing activate_mm() entirely seems to _work_, but of course it never does anything since smp_processor_id() eventually is just macros that expand to "0" (unless preempt debug is enabled). Any thoughts?

johannes

author
#5 lore raw

Re: [PATCH v2 3/3] um: Stop tracking stub's PID via userspace_pid[]

Quoted 23 lines · Johannes Berg
Quoted 5 lines · Tiwei Bie

From: Tiwei Bie <[email protected]>

The PID of the stub process can be obtained from current_mm_id(). There is no need to track it via userspace_pid[]. Stop doing that to simplify the code.

So that is really obvious cleanups, and I can go apply them on that grounds, but I started wondering if we're not separately being inconsistent here, which perhaps didn't matter due to non-SMP:

Review

Quoted 9 lines

#define activate_mm activate_mm
static inline void activate_mm(struct mm_struct *old, struct mm_struct *new) {

(quoted diff) +0 -5
-	/*
-	 * This is called by fs/exec.c and sys_unshare()
-	 * when the new ->mm is used for the first time.
-	 */
-	__switch_mm(&new->context.id);
 }

This is now empty, so I wondered if we can just remove it _entirely_.

Quoted 1 line

But the generic version calls switch_mm():

Yeah, removing activate_mm() will cause it to call switch_mm(). This is somewhat a behavior change beyond the scope of this patchset, so I kept it as is.

Quoted 18 lines
Quoted 4 lines

static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,

(quoted diff) +0 -0
@@ -28,11 +23,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {

Review static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, · line 30

Quoted 10 lines
(quoted diff) +1 -3
 	unsigned cpu = smp_processor_id();
 
-	if(prev != next){
+	if (prev != next) {
 		cpumask_clear_cpu(cpu, mm_cpumask(prev));
 		cpumask_set_cpu(cpu, mm_cpumask(next));
-		if(next != &init_mm)
-			__switch_mm(&next->context.id);
 	}
 }

which plays with the CPU mask, but realistically being non-SMP the CPU mask is never really used?

Quoted 4 lines

Certainly removing activate_mm() entirely seems to _work_, but of course it never does anything since smp_processor_id() eventually is just macros that expand to "0" (unless preempt debug is enabled). Any thoughts?

Yeah, things are a bit messy here and need to be sorted out.

IIUC, activate_mm() and switch_mm() are primarily used to update the page table and manage the TLBs on the CPU for each user address space. However, in UML, each user address space is represented by a separate stub process, and the host kernel already takes care of that. So, I'm not entirely sure why we need to maintain the mm_cpumask. Perhaps we could just do this:

arch/um/include/asm/mmu_context.h +0 -11
@@ -13,20 +13,9 @@
 #include <asm/mm_hooks.h>
 #include <asm/mmu.h>
 
-#define activate_mm activate_mm
-static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
-{
-}
-
 static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, 
 			     struct task_struct *tsk)
 {
-	unsigned cpu = smp_processor_id();
-
-	if (prev != next) {
-		cpumask_clear_cpu(cpu, mm_cpumask(prev));
-		cpumask_set_cpu(cpu, mm_cpumask(next));
-	}
 }
 
 #define init_new_context init_new_context

Regards,
Tiwei