Skip to contentSkip to conversation

mm/damon/sysfs: support periodic and automated stats update

RFC PATCH In review SeongJae Park 2 participants 10 messages Jul 12, 2025 – Jul 16, 2025

Subsystems (4)
lore
Share & tools
lore

SeongJae Park

author maintainer
#0 lore raw

cover mm/damon/sysfs: support periodic and automated stats update

DAMON sysfs interface provides files for reading DAMON internal status including DAMOS stats. The content of the files are not automatically updated, though. Users should manually request updates of the contents by writing a special command to 'state' file of each kdamond directory. This interface is good for minimizing overhead, but causes the below problems.

First, the usage is cumbersome. This is arguably not a big problem, since the user-space tool (damo) can do this instead of the user.

Second, it can be too slow. The update request is not directly handled by the sysfs interface but kdamond thread. And kdamond threads wake up only once per the sampling interval. Hence if sampling interval is not short, each update request could take too long time. The recommended sampling interval setup is asking DAMON to automatically tune it, within a range between 5 milliseconds and 10 seconds. On production systems it is not very rare to have a few seconds sampling interval as a result of the auto-tuning, so this can disturb observing DAMON internal status.

Finally, parallel update requests can conflict with each other. When parallel update requests are received, DAMON sysfs interface simply returns -EBUSY to one of the requests. DAMON user-space tool is hence implementing its own backoff mechanism, but this can make the operation even slower.

Introduce a new sysfs file, namely refresh_ms, for asking DAMON sysfs interface to repeat the essential contents update with a user-specified time delay. If non-zero value is written to the file, DAMON sysfs interface does the updates for essential DAMON internal status including auto-tuned monitoring intervals, DAMOS stats, and auto-tuned DAMOS quotas using the user-written value as the time delay. If zero is written to the file, the automatic refresh is disabled.

SeongJae Park (4):
mm/damon/sysfs: implement refresh_ms file under kdamond directory mm/damon/sysfs: implement refresh_ms file internal work Docs/admin-guide/mm/damon/usage: document refresh_ms file Docs/ABI/damon: update for refresh_ms

 .../ABI/testing/sysfs-kernel-mm-damon         |  7 +++
 Documentation/admin-guide/mm/damon/usage.rst  | 13 ++++-
 mm/damon/sysfs.c                              | 58 +++++++++++++++++++
 3 files changed, 75 insertions(+), 3 deletions(-)

base-commit: 982b86e9191292ffcd0f30018981cb16f9fac5c1

Signature · 1 line
2.39.5
author maintainer
#1 lore raw

RFC PATCH 1/4 mm/damon/sysfs: implement refresh_ms file under kdamond directory

Implement a new DAMON sysfs file named 'refresh_ms' under each kdamond directory. The file will be used as a control knob of automatic refresh of a few DAMON internal status files. This commit implements only minimum file operations, though. The automatic refresh feature will be implemented by the following commit.

---
 mm/damon/sysfs.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
mm/damon/sysfs.c +29 -0
index cce2c8a296e2..4296dc201f4d 100644
@@ -1155,6 +1155,7 @@ struct damon_sysfs_kdamond {
 	struct kobject kobj;
 	struct damon_sysfs_contexts *contexts;
 	struct damon_ctx *damon_ctx;
+	unsigned int refresh_ms;
 };
 
 static struct damon_sysfs_kdamond *damon_sysfs_kdamond_alloc(void)
@@ -1690,6 +1691,30 @@ static ssize_t pid_show(struct kobject *kobj,
 	return sysfs_emit(buf, "%d\n", pid);
 }
 
+static ssize_t refresh_ms_show(struct kobject *kobj,
+		struct kobj_attribute *attr, char *buf)
+{
+	struct damon_sysfs_kdamond *kdamond = container_of(kobj,
+			struct damon_sysfs_kdamond, kobj);
+
+	return sysfs_emit(buf, "%u\n", kdamond->refresh_ms);
+}
+
+static ssize_t refresh_ms_store(struct kobject *kobj,
+		struct kobj_attribute *attr, const char *buf, size_t count)
+{
+	struct damon_sysfs_kdamond *kdamond = container_of(kobj,
+			struct damon_sysfs_kdamond, kobj);
+	unsigned int nr;
+	int err = kstrtouint(buf, 0, &nr);
+
+	if (err)
+		return err;
+
+	kdamond->refresh_ms = nr;
+	return count;
+}
+
 static void damon_sysfs_kdamond_release(struct kobject *kobj)
 {
 	struct damon_sysfs_kdamond *kdamond = container_of(kobj,
@@ -1706,9 +1731,13 @@ static struct kobj_attribute damon_sysfs_kdamond_state_attr =
 static struct kobj_attribute damon_sysfs_kdamond_pid_attr =
 		__ATTR_RO_MODE(pid, 0400);
 
+static struct kobj_attribute damon_sysfs_kdamond_refresh_ms_attr =
+		__ATTR_RW_MODE(refresh_ms, 0600);
+
 static struct attribute *damon_sysfs_kdamond_attrs[] = {
 	&damon_sysfs_kdamond_state_attr.attr,
 	&damon_sysfs_kdamond_pid_attr.attr,
+	&damon_sysfs_kdamond_refresh_ms_attr.attr,
 	NULL,
 };
 ATTRIBUTE_GROUPS(damon_sysfs_kdamond);
Signature · 1 line
2.39.5
author maintainer
#2 lore raw

RFC PATCH 2/4 mm/damon/sysfs: implement refresh_ms file internal work

In reply to SeongJae Park

Only minimum file operations for refresh_ms file is implemented. Further implement its designed behavior, the periodic essential files content update, using repeat mode damon_call().

If non-zero value is written to the file, update DAMON sysfs files for auto-tuned monitoring intervals, DAMOS stats, and auto-tuned DAMOS quota values, which are essential to be monitored in most DAMON use cases. The user-written non-zero value becomes the time delay between the update. If zero is written to the file, the periodic refresh is disabled.

---
 mm/damon/sysfs.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)
mm/damon/sysfs.c +29 -0
index 4296dc201f4d..6d2b0dab50cb 100644
@@ -1509,6 +1509,32 @@ static struct damon_ctx *damon_sysfs_build_ctx(
 	return ctx;
 }
 
+static int damon_sysfs_repeat_call_fn(void *data)
+{
+	struct damon_sysfs_kdamond *sysfs_kdamond = data;
+	static unsigned long next_update_jiffies;
+
+	if (!sysfs_kdamond->refresh_ms)
+		return 0;
+	if (time_before(jiffies, next_update_jiffies))
+		return 0;
+	next_update_jiffies = jiffies +
+		msecs_to_jiffies(sysfs_kdamond->refresh_ms);
+
+	if (!mutex_trylock(&damon_sysfs_lock))
+		return 0;
+	damon_sysfs_upd_tuned_intervals(sysfs_kdamond);
+	damon_sysfs_upd_schemes_stats(sysfs_kdamond);
+	damon_sysfs_upd_schemes_effective_quotas(sysfs_kdamond);
+	mutex_unlock(&damon_sysfs_lock);
+	return 0;
+}
+
+static struct damon_call_control damon_sysfs_repeat_call_control = {
+	.fn = damon_sysfs_repeat_call_fn,
+	.repeat = true,
+};
+
 static int damon_sysfs_turn_damon_on(struct damon_sysfs_kdamond *kdamond)
 {
 	struct damon_ctx *ctx;
@@ -1533,6 +1559,9 @@ static int damon_sysfs_turn_damon_on(struct damon_sysfs_kdamond *kdamond)
 		return err;
 	}
 	kdamond->damon_ctx = ctx;
+
+	damon_sysfs_repeat_call_control.data = kdamond;
+	damon_call(ctx, &damon_sysfs_repeat_call_control);
 	return err;
 }
 
Signature · 1 line
2.39.5
author maintainer
#3 lore raw

RFC PATCH 3/4 Docs/admin-guide/mm/damon/usage: document refresh_ms file

In reply to SeongJae Park

Document the new DAMON sysfs file, refresh_ms, on the usage document.

---
 Documentation/admin-guide/mm/damon/usage.rst | 13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
Documentation/admin-guide/mm/damon/usage.rst +10 -3
index fc5c962353ed..ff3a2dda1f02 100644
@@ -59,7 +59,7 @@ comma (",").
 
     :ref:`/sys/kernel/mm/damon <sysfs_root>`/admin
     │ :ref:`kdamonds <sysfs_kdamonds>`/nr_kdamonds
-    │ │ :ref:`0 <sysfs_kdamond>`/state,pid
+    │ │ :ref:`0 <sysfs_kdamond>`/state,pid,refresh_ms
     │ │ │ :ref:`contexts <sysfs_contexts>`/nr_contexts
     │ │ │ │ :ref:`0 <sysfs_context>`/avail_operations,operations
     │ │ │ │ │ :ref:`monitoring_attrs <sysfs_monitoring_attrs>`/
@@ -123,8 +123,8 @@ kdamond.
 kdamonds/<N>/
 -------------
 
-In each kdamond directory, two files (``state`` and ``pid``) and one directory
-(``contexts``) exist.
+In each kdamond directory, three files (``state``, ``pid`` and ``refresh_ms``)
+and one directory (``contexts``) exist.
 
 Reading ``state`` returns ``on`` if the kdamond is currently running, or
 ``off`` if it is not running.
@@ -161,6 +161,13 @@ Users can write below commands for the kdamond to the ``state`` file.
 
 If the state is ``on``, reading ``pid`` shows the pid of the kdamond thread.
 
+Users can ask the kernel to periodically update files showing auto-tuned
+parameters and DAMOS stats instead of manually writing
+``update_tuned_intervals`` like keywords to ``state`` file.  For this, users
+should write the desired update time interval in milliseconds to ``refresh_ms``
+file.  If the interval is zero, the periodic update is disabled.  Reading the
+file shows currently set time interval.
+
 ``contexts`` directory contains files for controlling the monitoring contexts
 that this kdamond will execute.
 
Signature · 1 line
2.39.5
author maintainer
#4 lore raw

RFC PATCH 4/4 Docs/ABI/damon: update for refresh_ms

In reply to SeongJae Park

Document the new DAMON sysfs file, refresh_ms, on the ABI document.

---
 Documentation/ABI/testing/sysfs-kernel-mm-damon | 7 +++++++
 1 file changed, 7 insertions(+)
Documentation/ABI/testing/sysfs-kernel-mm-damon +7 -0
index e98974dfac7a..6791d879759e 100644
@@ -44,6 +44,13 @@ Contact:	SeongJae Park <[email protected]>
 Description:	Reading this file returns the pid of the kdamond if it is
 		running.
 
+What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/refresh_ms
+Date:		Jul 2025
+Contact:	SeongJae Park <[email protected]>
+Description:	Writing a value to this file sets the time interval for
+		automatic DAMON status file contents update.  Writing '0'
+		disables the update.  Reading this file returns the value.
+
 What:		/sys/kernel/mm/damon/admin/kdamonds/<K>/contexts/nr_contexts
 Date:		Mar 2022
 Contact:	SeongJae Park <[email protected]>
Signature · 1 line
2.39.5
#5 lore raw
In reply to SeongJae Park

Hi SeongJae,

Quoted 25 lines · SeongJae Park

DAMON sysfs interface provides files for reading DAMON internal status including DAMOS stats. The content of the files are not automatically updated, though. Users should manually request updates of the contents by writing a special command to 'state' file of each kdamond directory. This interface is good for minimizing overhead, but causes the below problems.

First, the usage is cumbersome. This is arguably not a big problem, since the user-space tool (damo) can do this instead of the user.

Second, it can be too slow. The update request is not directly handled by the sysfs interface but kdamond thread. And kdamond threads wake up only once per the sampling interval. Hence if sampling interval is not short, each update request could take too long time. The recommended sampling interval setup is asking DAMON to automatically tune it, within a range between 5 milliseconds and 10 seconds. On production systems it is not very rare to have a few seconds sampling interval as a result of the auto-tuning, so this can disturb observing DAMON internal status.

Finally, parallel update requests can conflict with each other. When parallel update requests are received, DAMON sysfs interface simply returns -EBUSY to one of the requests. DAMON user-space tool is hence implementing its own backoff mechanism, but this can make the operation even slower.

Quoted 3 lines

Introduce a new sysfs file, namely refresh_ms, for asking DAMON sysfs interface to repeat the essential contents update with a user-specified time delay.

Thanks for working on this, but I have a few questions.
1. Could you please list up what are the "essential contents"?
2. Does it mean that it is different from writing "commit" to "state"?
3. If not, then is there equivalent action to writing something to "state"?

If possible, then this kind of information is better to be documented because users might get confused if something isn't udpated when "refresh_ms" is set.

Thanks,
Honggyu

Quoted 22 lines

If non-zero value is written to the file, DAMON sysfs interface does the updates for essential DAMON internal status including auto-tuned monitoring intervals, DAMOS stats, and auto-tuned DAMOS quotas using the user-written value as the time delay. If zero is written to the file, the automatic refresh is disabled.

SeongJae Park (4):
mm/damon/sysfs: implement refresh_ms file under kdamond directory mm/damon/sysfs: implement refresh_ms file internal work Docs/admin-guide/mm/damon/usage: document refresh_ms file Docs/ABI/damon: update for refresh_ms

  .../ABI/testing/sysfs-kernel-mm-damon         |  7 +++
  Documentation/admin-guide/mm/damon/usage.rst  | 13 ++++-
  mm/damon/sysfs.c                              | 58 +++++++++++++++++++
  3 files changed, 75 insertions(+), 3 deletions(-)

base-commit: 982b86e9191292ffcd0f30018981cb16f9fac5c1 --
2.39.5

author maintainer
#6 lore raw
Quoted 28 lines · On Wed, 16 Jul 2025 07:20:57 +0900 Honggyu Kim <[email protected]> wrote:

Hi SeongJae,

Quoted 25 lines · SeongJae Park

DAMON sysfs interface provides files for reading DAMON internal status including DAMOS stats. The content of the files are not automatically updated, though. Users should manually request updates of the contents by writing a special command to 'state' file of each kdamond directory. This interface is good for minimizing overhead, but causes the below problems.

First, the usage is cumbersome. This is arguably not a big problem, since the user-space tool (damo) can do this instead of the user.

Second, it can be too slow. The update request is not directly handled by the sysfs interface but kdamond thread. And kdamond threads wake up only once per the sampling interval. Hence if sampling interval is not short, each update request could take too long time. The recommended sampling interval setup is asking DAMON to automatically tune it, within a range between 5 milliseconds and 10 seconds. On production systems it is not very rare to have a few seconds sampling interval as a result of the auto-tuning, so this can disturb observing DAMON internal status.

Finally, parallel update requests can conflict with each other. When parallel update requests are received, DAMON sysfs interface simply returns -EBUSY to one of the requests. DAMON user-space tool is hence implementing its own backoff mechanism, but this can make the operation even slower.

Quoted 6 lines
Quoted 3 lines

Introduce a new sysfs file, namely refresh_ms, for asking DAMON sysfs interface to repeat the essential contents update with a user-specified time delay.

Thanks for working on this, but I have a few questions.
1. Could you please list up what are the "essential contents"?

Thank you for asking this. The contents are auto-tuned monitoring intervals, DAMOS stats, and auto-tuned effective size quota.

I will add these on the next version cover letter.

Quoted 2 lines

2. Does it mean that it is different from writing "commit" to "state"?
3. If not, then is there equivalent action to writing something to "state"?

"refresh_ms" works same to other DAMON parameter files. You can set it before starting DAMON, or "commit" new values (including 0 for turning this refresh off) in runtime.

I'm not that confident if I understood your point very well, especially what "it"s mean. Let me know if I'm misunderstanding something.

Quoted 3 lines

If possible, then this kind of information is better to be documented because users might get confused if something isn't udpated when "refresh_ms" is set.

You're right! I'll add above things on the next version of the cover letter.

Thanks,
SJ

[...]

#7 lore raw

Hi SeongJae,

Quoted 34 lines · SeongJae Park
Quoted 32 lines · On Wed, 16 Jul 2025 07:20:57 +0900 Honggyu Kim <[email protected]> wrote:

Hi SeongJae,

Quoted 28 lines · SeongJae Park

DAMON sysfs interface provides files for reading DAMON internal status including DAMOS stats. The content of the files are not automatically updated, though. Users should manually request updates of the contents by writing a special command to 'state' file of each kdamond directory. This interface is good for minimizing overhead, but causes the below problems.

First, the usage is cumbersome. This is arguably not a big problem, since the user-space tool (damo) can do this instead of the user.

Second, it can be too slow. The update request is not directly handled by the sysfs interface but kdamond thread. And kdamond threads wake up only once per the sampling interval. Hence if sampling interval is not short, each update request could take too long time. The recommended sampling interval setup is asking DAMON to automatically tune it, within a range between 5 milliseconds and 10 seconds. On production systems it is not very rare to have a few seconds sampling interval as a result of the auto-tuning, so this can disturb observing DAMON internal status.

Finally, parallel update requests can conflict with each other. When parallel update requests are received, DAMON sysfs interface simply returns -EBUSY to one of the requests. DAMON user-space tool is hence implementing its own backoff mechanism, but this can make the operation even slower.

Introduce a new sysfs file, namely refresh_ms, for asking DAMON sysfs interface to repeat the essential contents update with a user-specified time delay.

Quoted 5 lines
Quoted 2 lines

Thanks for working on this, but I have a few questions.
1. Could you please list up what are the "essential contents"?

Thank you for asking this. The contents are auto-tuned monitoring intervals, DAMOS stats, and auto-tuned effective size quota.

Thanks, but I meant the specific list of damon knobs refreshed. If there are too many knobs, then don't have to list them all.

Quoted 1 line

I will add these on the next version cover letter.

Thanks.

Quoted 9 lines
Quoted 2 lines

2. Does it mean that it is different from writing "commit" to "state"?
3. If not, then is there equivalent action to writing something to "state"?

"refresh_ms" works same to other DAMON parameter files. You can set it before starting DAMON, or "commit" new values (including 0 for turning this refresh off) in runtime.

I'm not that confident if I understood your point very well, especially what "it"s mean. Let me know if I'm misunderstanding something.

I mean writing "commit" to "state" refresh all knobs, but it seems "refresh_ms" internally refresh paritial knobs so I was wondering what are refreshed and what aren't.

Regarding the "equivalent action", I was also wondering if there is a command that works same as "refresh_ms" internally does among the command below.

update_tuned_intervals
commit_schemes_quota_goals
update_schemes_stats
update_schemes_tried_regions
update_schemes_tried_bytes
clear_schemes_tried_regions
update_schemes_effective_quotas

https://docs.kernel.org/admin-guide/mm/damon/usage.html#kdamonds-n

In other words, if there is the same command listed above, then users might be able to run a script that regularaly write the command to the current "state" even without this "refresh_ms". I know having "refresh_ms" is much better though.

Thanks,
Honggyu

Quoted 12 lines
Quoted 4 lines

If possible, then this kind of information is better to be documented because users might get confused if something isn't udpated when "refresh_ms" is set.

You're right! I'll add above things on the next version of the cover letter.

Thanks,
SJ

[...]

author maintainer
#8 lore raw
Quoted 37 lines · On Wed, 16 Jul 2025 10:58:06 +0900 Honggyu Kim <[email protected]> wrote:

Hi SeongJae,

Quoted 34 lines · SeongJae Park
Quoted 32 lines · On Wed, 16 Jul 2025 07:20:57 +0900 Honggyu Kim <[email protected]> wrote:

Hi SeongJae,

Quoted 28 lines · SeongJae Park

DAMON sysfs interface provides files for reading DAMON internal status including DAMOS stats. The content of the files are not automatically updated, though. Users should manually request updates of the contents by writing a special command to 'state' file of each kdamond directory. This interface is good for minimizing overhead, but causes the below problems.

First, the usage is cumbersome. This is arguably not a big problem, since the user-space tool (damo) can do this instead of the user.

Second, it can be too slow. The update request is not directly handled by the sysfs interface but kdamond thread. And kdamond threads wake up only once per the sampling interval. Hence if sampling interval is not short, each update request could take too long time. The recommended sampling interval setup is asking DAMON to automatically tune it, within a range between 5 milliseconds and 10 seconds. On production systems it is not very rare to have a few seconds sampling interval as a result of the auto-tuning, so this can disturb observing DAMON internal status.

Finally, parallel update requests can conflict with each other. When parallel update requests are received, DAMON sysfs interface simply returns -EBUSY to one of the requests. DAMON user-space tool is hence implementing its own backoff mechanism, but this can make the operation even slower.

Introduce a new sysfs file, namely refresh_ms, for asking DAMON sysfs interface to repeat the essential contents update with a user-specified time delay.

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

Thanks for working on this, but I have a few questions.
1. Could you please list up what are the "essential contents"?

Thank you for asking this. The contents are auto-tuned monitoring intervals, DAMOS stats, and auto-tuned effective size quota.

Thanks, but I meant the specific list of damon knobs refreshed. If there are too many knobs, then don't have to list them all.

I guess you are saying about sysfs files? Yes, I think listing those all is unnecessary.

Quoted 8 lines
Quoted 2 lines

I will add these on the next version cover letter.

Thanks.

Quoted 3 lines
Quoted 2 lines

2. Does it mean that it is different from writing "commit" to "state"?
3. If not, then is there equivalent action to writing something to "state"?

Quoted 8 lines
Quoted 6 lines

"refresh_ms" works same to other DAMON parameter files. You can set it before starting DAMON, or "commit" new values (including 0 for turning this refresh off) in runtime.

I'm not that confident if I understood your point very well, especially what "it"s mean. Let me know if I'm misunderstanding something.

I mean writing "commit" to "state" refresh all knobs,

Assuming "knobs" mean sysfs files, this is incorrect. Writing "commit" to "state" passes the parameters written on appropriate files to running kdamond. It doesn't update any sysfs files until a "update_*" keyword is written to the "state" file.

Quoted 15 lines

but it seems "refresh_ms"
internally refresh paritial knobs so I was wondering what are refreshed and what aren't.

Regarding the "equivalent action", I was also wondering if there is a command that works same as "refresh_ms" internally does among the command below.

update_tuned_intervals
commit_schemes_quota_goals
update_schemes_stats
update_schemes_tried_regions
update_schemes_tried_bytes
clear_schemes_tried_regions
update_schemes_effective_quotas

Quoted 6 lines

https://docs.kernel.org/admin-guide/mm/damon/usage.html#kdamonds-n

In other words, if there is the same command listed above, then users might be able to run a script that regularaly write the command to the current "state" even without this "refresh_ms". I know having "refresh_ms" is much better though.

Thank you for this nice question. Yes. Enabling "refresh_ms" is roughly same to periodically writing "update_{tuned_intervals,schemes_stats,schemes_effective_quotas" to "state" file.

Thanks,
SJ

[...]

#9 lore raw
Quoted 16 lines · SeongJae Park
Quoted 14 lines · On Wed, 16 Jul 2025 10:58:06 +0900 Honggyu Kim <[email protected]> wrote:

Hi SeongJae,

Quoted 11 lines · SeongJae Park
Quoted 9 lines · On Wed, 16 Jul 2025 07:20:57 +0900 Honggyu Kim <[email protected]> wrote:

Hi SeongJae,

Quoted 6 lines · SeongJae Park

DAMON sysfs interface provides files for reading DAMON internal status including DAMOS stats. The content of the files are not automatically updated, though. Users should manually request updates of the contents by writing a special command to 'state' file of each kdamond directory. This interface is good for minimizing overhead, but causes the below problems.

[...snip...]

Quoted 7 lines
Quoted 7 lines
Quoted 7 lines
Quoted 6 lines
Quoted 3 lines

Introduce a new sysfs file, namely refresh_ms, for asking DAMON sysfs interface to repeat the essential contents update with a user-specified time delay.

Thanks for working on this, but I have a few questions.
1. Could you please list up what are the "essential contents"?

Quoted 8 lines
Quoted 5 lines
Quoted 2 lines

Thank you for asking this. The contents are auto-tuned monitoring intervals, DAMOS stats, and auto-tuned effective size quota.

Thanks, but I meant the specific list of damon knobs refreshed. If there are too many knobs, then don't have to list them all.

I guess you are saying about sysfs files? Yes, I think listing those all is unnecessary.

OK. No problem then.

Quoted 14 lines
Quoted 14 lines
Quoted 1 line

I will add these on the next version cover letter.

Thanks.

Quoted 9 lines
Quoted 2 lines

2. Does it mean that it is different from writing "commit" to "state"?
3. If not, then is there equivalent action to writing something to "state"?

"refresh_ms" works same to other DAMON parameter files. You can set it before starting DAMON, or "commit" new values (including 0 for turning this refresh off) in runtime.

I'm not that confident if I understood your point very well, especially what "it"s mean. Let me know if I'm misunderstanding something.

Quoted 6 lines
Quoted 1 line

I mean writing "commit" to "state" refresh all knobs,

Assuming "knobs" mean sysfs files, this is incorrect. Writing "commit" to "state" passes the parameters written on appropriate files to running kdamond. It doesn't update any sysfs files until a "update_*" keyword is written to the "state" file.

I thought writing "commit" to "state" applies config changes and updates all the readable sysfs files together, but it doesn't. Thanks for the correction.

Quoted 23 lines
Quoted 16 lines

but it seems "refresh_ms"
internally refresh paritial knobs so I was wondering what are refreshed and what aren't.

Regarding the "equivalent action", I was also wondering if there is a command that works same as "refresh_ms" internally does among the command below.

update_tuned_intervals
commit_schemes_quota_goals
update_schemes_stats
update_schemes_tried_regions
update_schemes_tried_bytes
clear_schemes_tried_regions
update_schemes_effective_quotas

Quoted 6 lines

https://docs.kernel.org/admin-guide/mm/damon/usage.html#kdamonds-n

In other words, if there is the same command listed above, then users might be able to run a script that regularaly write the command to the current "state" even without this "refresh_ms". I know having "refresh_ms" is much better though.

Quoted 4 lines

Thank you for this nice question. Yes. Enabling "refresh_ms" is roughly same to periodically writing "update_{tuned_intervals,schemes_stats,schemes_effective_quotas" to "state" file.

OK. I get that "refresh_ms" does periodic write the combination of them to "state" without "update_{schemes_tried_regions,schemes_tried_bytes}.

In other words, it is same as periodic execution of the follows.

echo update_tuned_intervals > state
echo update_schemes_stats > state
echo update_schemes_effective_quotas > state

That makes my question clear. Thanks for the explanation!

Thanks,
Honggyu

Quoted 6 lines

Thanks,
SJ

[...]