s390/net: Remove NETIUCV device driver
Subsystems (6)
Alexandra Winter
maintainerPATCH 1/1 s390/net: Remove NETIUCV device driver
From: Nagamani PV <[email protected]>
The netiucv driver creates TCP/IP interfaces over IUCV between Linux guests on z/VM and other z/VM entities.
Rationale for removal:
- NETIUCV connections are only supported for compatibility with earlier versions and not to be used for new network setups, since at least Linux kernel 4.0.
- No known active users, use cases, or product dependencies
- The driver is no longer relevant for z/VM networking; preferred methods include:
* Device pass-through (e.g., OSA, RoCE)
* z/VM Virtual Switch (VSWITCH)
The IUCV mechanism itself remains supported and is actively used via AF_IUCV, hvc_iucv, and smsg_iucv.
--- Documentation/arch/s390/driver-model.rst | 21 - drivers/s390/net/Kconfig | 12 - drivers/s390/net/Makefile | 1 - drivers/s390/net/netiucv.c | 2083 ---------------------- 4 files changed, 2117 deletions(-) delete mode 100644 drivers/s390/net/netiucv.c
Documentation/arch/s390/driver-model.rst +0 -21
@@ -305,24 +305,3 @@ xpram shows up under devices/system/ as 'xpram'. For each cpu, a directory is created under devices/system/cpu/. Each cpu has an attribute 'online' which can be 0 or 1. - - -4. Other devices ----------------- - -4.1 Netiucv ------------ - -The netiucv driver creates an attribute 'connection' under -bus/iucv/drivers/netiucv. Piping to this attribute creates a new netiucv -connection to the specified host. - -Netiucv connections show up under devices/iucv/ as "netiucv<ifnum>". The interface -number is assigned sequentially to the connections defined via the 'connection' -attribute. - -user - - shows the connection partner. - -buffer - - maximum buffer size. Pipe to it to change buffer size.
drivers/s390/net/Kconfig +0 -12
@@ -17,18 +17,6 @@ config CTCM To compile into the kernel, choose Y. If you do not need any channel-to-channel connection, choose N. -config NETIUCV - def_tristate m - prompt "IUCV network device support (VM only)" - depends on IUCV && NETDEVICES - help - Select this option if you want to use inter-user communication - vehicle networking under VM or VIF. It enables a fast communication - link between VM guests. Using ifconfig a point-to-point connection - can be established to the Linux on IBM System z - running on the other VM guest. To compile as a module, choose M. - The module name is netiucv. If unsure, choose Y. - config SMSGIUCV def_tristate m prompt "IUCV special message support (VM only)"
drivers/s390/net/Makefile +0 -1
@@ -5,7 +5,6 @@ ctcm-y += ctcm_main.o ctcm_fsms.o ctcm_mpc.o ctcm_sysfs.o ctcm_dbug.o obj-$(CONFIG_CTCM) += ctcm.o fsm.o -obj-$(CONFIG_NETIUCV) += netiucv.o fsm.o obj-$(CONFIG_SMSGIUCV) += smsgiucv.o obj-$(CONFIG_SMSGIUCV_EVENT) += smsgiucv_app.o qeth-y += qeth_core_sys.o qeth_core_main.o qeth_core_mpc.o qeth_ethtool.o
drivers/s390/net/netiucv.c deleted +0 -2083
2,083 lines not on this page · raw message
Signature · 1 line
2.48.1
Quoted 21 lines · Alexandra Winter
From: Nagamani PV <[email protected]>
The netiucv driver creates TCP/IP interfaces over IUCV between Linux guests on z/VM and other z/VM entities.
Rationale for removal:
- NETIUCV connections are only supported for compatibility with earlier versions and not to be used for new network setups, since at least Linux kernel 4.0.
- No known active users, use cases, or product dependencies
- The driver is no longer relevant for z/VM networking; preferred methods include:
* Device pass-through (e.g., OSA, RoCE)
* z/VM Virtual Switch (VSWITCH)The IUCV mechanism itself remains supported and is actively used via
AF_IUCV,hvc_iucv, andsmsg_iucv.Signed-off-by Nagamani PV <[email protected]>Reviewed-by Alexandra Winter <[email protected]>Signed-off-by Alexandra Winter <[email protected]>
Quoted 7 lines
--- Documentation/arch/s390/driver-model.rst | 21 - drivers/s390/net/Kconfig | 12 - drivers/s390/net/Makefile | 1 - drivers/s390/net/netiucv.c | 2083 ---------------------- 4 files changed, 2117 deletions(-) delete mode 100644 drivers/s390/net/netiucv.c
Less is more :)
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 15 lines · On Tue, 15 Jul 2025 09:42:10 +0200 you wrote:
From: Nagamani PV <[email protected]>
The netiucv driver creates TCP/IP interfaces over IUCV between Linux guests on z/VM and other z/VM entities.
Rationale for removal:
- NETIUCV connections are only supported for compatibility with earlier versions and not to be used for new network setups, since at least Linux kernel 4.0.
- No known active users, use cases, or product dependencies
- The driver is no longer relevant for z/VM networking; preferred methods include:
* Device pass-through (e.g., OSA, RoCE)
* z/VM Virtual Switch (VSWITCH)
Quoted 1 line
[...]
Here is the summary with links:
- [net-next] s390/net: Remove NETIUCV device driver
https://git.kernel.org/netdev/net-next/c/727258025b93
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html