pinctrl: gpio: sx150x: add Semtech SX150x I2C GPIO expander and pinctrl driver
PATCH 1/1 pinctrl: gpio: sx150x: add Semtech SX150x I2C GPIO expander and pinctrl driver
From: Anis Chali <[email protected]>
implement a driver to use semtech pinctrl and
gpio expander, this driver is adapted from a
existent linux driver that is written by
Gregory Bean <[email protected]>.
--- drivers/pinctrl/Kconfig | 18 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-sx150x.c | 902 +++++++++++++++++++++++++++++++ 3 files changed, 921 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-sx150x.c
drivers/pinctrl/Kconfig +18 -0
@@ -263,6 +263,24 @@ config PINCTRL_ROCKCHIP_RV1108 both the GPIO definitions and pin control functions for each available multiplex function. +config PINCTRL_SX150X + bool "Semtech SX150x I2C GPIO expander pinctrl driver" + depends on DM && PINCTRL_FULL + help + Say yes here to provide support for Semtech SX150x-series I2C + GPIO expanders as pinctrl module. + Compatible models include: + - 8 bits: sx1508q, sx1502q + - 16 bits: sx1509q, sx1506q + +config SPL_PINCTRL_SX150X + bool "Semtech SX150x I2C GPIO expander pinctrl driver in SPL" + depends on DM && SPL_PINCTRL_FULL + help + This option is an SPL-variant of the PINCTRL_SX150X option. + See the help of PINCTRL_SX150X for details. + + config PINCTRL_SANDBOX bool "Sandbox pinctrl driver" depends on SANDBOX
drivers/pinctrl/Makefile +1 -0
@@ -32,6 +32,7 @@ obj-$(CONFIG_PINCTRL_QE) += pinctrl-qe-io.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_STI) += pinctrl-sti.o obj-$(CONFIG_PINCTRL_STM32) += pinctrl_stm32.o +obj-$(CONFIG_$(PHASE_)PINCTRL_SX150X) += pinctrl-sx150x.o obj-$(CONFIG_$(PHASE_)PINCTRL_STMFX) += pinctrl-stmfx.o obj-y += broadcom/ obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o
drivers/pinctrl/pinctrl-sx150x.c new file +902 -0
902 lines not on this page · raw message
Signature · 1 line
2.49.0
Quoted 6 lines · On Sun, 18 May 2025 17:25:24 -0400, [email protected] wrote:
implement a driver to use semtech pinctrl and
gpio expander, this driver is adapted from a
existent linux driver that is written by
Gregory Bean <[email protected]>.
Applied to u-boot/next, thanks!
[1/1] pinctrl: gpio: sx150x: add Semtech SX150x I2C GPIO expander and pinctrl driver
commit: 5451504256d34dca5b810a512d3c8dec84ebb49c
Signature · 1 line
Tom
Quoted 9 lines · Tom Rini
Quoted 6 lines · On Sun, 18 May 2025 17:25:24 -0400, [email protected] wrote:
implement a driver to use semtech pinctrl and
gpio expander, this driver is adapted from a
existent linux driver that is written by
Gregory Bean <[email protected]>.
Quoted 4 lines
Applied to u-boot/next, thanks!
[1/1] pinctrl: gpio: sx150x: add Semtech SX150x I2C GPIO expander and pinctrl driver
commit: 5451504256d34dca5b810a512d3c8dec84ebb49c
I see this isn't enabled anywhere. Further, I see warnings enabling it on sandbox. Please fix the warnings seen when enabling this on sandbox, thanks. Will a platform be upstreamed soon which makes use of this?
Signature · 1 line
Tom