Skip to contentSkip to conversation

tune-cortexa53,tune-cortexa72: Add +nocrypto to -mcpu

PATCH In review Khem Raj 2 participants 3 messages Jul 21, 2025

lore
Share & tools
lore

Khem Raj

author
#0 lore raw

PATCH 1/1 tune-cortexa53,tune-cortexa72: Add +nocrypto to -mcpu

When crypto is not in tune features then add +nocryto to -mcpu explicitly. This makes the behavior between clang and gcc match. Currently -mcpu=cortex-a72 has different behavior in clang and gcc in terms of what features are considered default. Clang's philosophy to enable common features but maximally, gcc on other hand takes minimal. Clang therefore enables crypto with default set but gcc does not. crypto is optional on cortext-a53 and cortex-a72 while, this is not as common but Broadcom SOCs in raspberrypi3/4 have dropped crypto for cost reasons [1] This results in illegal instruction traps [2] [3] when building components e.g. chromium, qtwebengine, weston etc with clang using -mcpu=cortex-a72 for rpi4 target.

Adding +nocrypto makes it behave like gcc does today. We do have separate tune if crypto enabled cortex-a72 cores are to be targeted (cortexa72-cryto) as DEFAULTTUNE

[1] https://forums.raspberrypi.com/viewtopic.php?f=63&t=207888#p1332960
[2] https://github.com/llvm/llvm-project/issues/85699
[3] https://github.com/llvm/llvm-project/issues/90365

---
 meta/conf/machine/include/arm/armv8a/tune-cortexa53.inc | 2 ++
 meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc | 2 ++
 2 files changed, 4 insertions(+)
meta/conf/machine/include/arm/armv8a/tune-cortexa53.inc +2 -0
index a88575eb156..65fd6333198 100644
@@ -2,6 +2,8 @@ DEFAULTTUNE ?= "cortexa53"
 
 TUNEVALID[cortexa53] = "Enable Cortex-A53 specific processor optimizations"
 TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'cortexa53', ' -mcpu=cortex-a53', '', d)}"
+# See  https://github.com/llvm/llvm-project/issues/85699
+TUNE_CCARGS_MARCH_OPTS .= "${@bb.utils.contains('TUNE_FEATURES', 'crypto', '', '+nocrypto', d)}"
 
 require conf/machine/include/arm/arch-armv8a.inc
 
meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc +2 -0
index cbb6418c069..cf09db00664 100644
@@ -2,6 +2,8 @@ DEFAULTTUNE ?= "cortexa72"
 
 TUNEVALID[cortexa72] = "Enable Cortex-A72 specific processor optimizations"
 TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'cortexa72', ' -mcpu=cortex-a72', '', d)}"
+# See  https://github.com/llvm/llvm-project/issues/85699
+TUNE_CCARGS_MARCH_OPTS .= "${@bb.utils.contains('TUNE_FEATURES', 'crypto', '', '+nocrypto', d)}"
 
 require conf/machine/include/arm/arch-armv8a.inc
 
#1 lore raw

Hi Khem,

Quoted 46 lines · Khem Raj via lists.openembedded.org

When crypto is not in tune features then add +nocryto to -mcpu explicitly. This makes the behavior between clang and gcc match. Currently -mcpu=cortex-a72 has different behavior in clang and gcc in terms of what features are considered default. Clang's philosophy to enable common features but maximally, gcc on other hand takes minimal. Clang therefore enables crypto with default set but gcc does not. crypto is optional on cortext-a53 and cortex-a72 while, this is not as common but Broadcom SOCs in raspberrypi3/4 have dropped crypto for cost reasons [1] This results in illegal instruction traps [2] [3] when building components e.g. chromium, qtwebengine, weston etc with clang using -mcpu=cortex-a72 for rpi4 target.

Adding +nocrypto makes it behave like gcc does today. We do have separate tune if crypto enabled cortex-a72 cores are to be targeted (cortexa72-cryto) as DEFAULTTUNE

[1] https://forums.raspberrypi.com/viewtopic.php?f=63&t=207888#p1332960
[2] https://github.com/llvm/llvm-project/issues/85699
[3] https://github.com/llvm/llvm-project/issues/90365

---
  meta/conf/machine/include/arm/armv8a/tune-cortexa53.inc | 2 ++
  meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc | 2 ++
  2 files changed, 4 insertions(+)
meta/conf/machine/include/arm/armv8a/tune-cortexa53.inc +2 -0
index a88575eb156..65fd6333198 100644
@@ -2,6 +2,8 @@ DEFAULTTUNE ?= "cortexa53"
 
  TUNEVALID[cortexa53] = "Enable Cortex-A53 specific processor optimizations"
  TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'cortexa53', ' -mcpu=cortex-a53', '', d)}"
+# See  https://github.com/llvm/llvm-project/issues/85699
+TUNE_CCARGS_MARCH_OPTS .= "${@bb.utils.contains('TUNE_FEATURES', 'crypto', '', '+nocrypto', d)}"
 
  require conf/machine/include/arm/arch-armv8a.inc
 
meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc +0 -0
index cbb6418c069..cf09db00664 100644

meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc DEFAULTTUNE ?= "cortexa72" · line 7

Quoted 6 lines
meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc +2 -0
@@ -2,6 +2,8 @@ DEFAULTTUNE ?= "cortexa72"
 
  TUNEVALID[cortexa72] = "Enable Cortex-A72 specific processor optimizations"
  TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'cortexa72', ' -mcpu=cortex-a72', '', d)}"
+# See  https://github.com/llvm/llvm-project/issues/85699
+TUNE_CCARGS_MARCH_OPTS .= "${@bb.utils.contains('TUNE_FEATURES', 'crypto', '', '+nocrypto', d)}"
 

I'm very unfamiliar with the tuning part of the machine configuration files, but isn't that something we could add in

meta/conf/machine/include/arm/feature-arm-crypto.inc

in the counterpart of +crypto?

I'm just a bit confused by the decision to only touch cortex a53 and a72 tuning files? Reading the DTs and the commit log it seems those are the cores in the RPi 3 and 4 which do not have crypto, but I assume this would be applicable to any SoC without the crypto block anyway no? So should be generic instead? Are you aware of the RPi5 having done the same cost-cutting measure? It's sporting a76 cores so maybe we need to do something with that too?

Cheers,
Quentin

author
#2 lore raw
Quoted 62 lines · Quentin Schulz

Hi Khem,

Quoted 46 lines · Khem Raj via lists.openembedded.org

When crypto is not in tune features then add +nocryto to -mcpu explicitly. This makes the behavior between clang and gcc match. Currently -mcpu=cortex-a72 has different behavior in clang and gcc in terms of what features are considered default. Clang's philosophy to enable common features but maximally, gcc on other hand takes minimal. Clang therefore enables crypto with default set but gcc does not. crypto is optional on cortext-a53 and cortex-a72 while, this is not as common but Broadcom SOCs in raspberrypi3/4 have dropped crypto for cost reasons [1] This results in illegal instruction traps [2] [3] when building components e.g. chromium, qtwebengine, weston etc with clang using -mcpu=cortex-a72 for rpi4 target.

Adding +nocrypto makes it behave like gcc does today. We do have separate tune if crypto enabled cortex-a72 cores are to be targeted (cortexa72-cryto) as DEFAULTTUNE

[1] https://forums.raspberrypi.com/viewtopic.php?f=63&t=207888#p1332960
[2] https://github.com/llvm/llvm-project/issues/85699
[3] https://github.com/llvm/llvm-project/issues/90365

---
  meta/conf/machine/include/arm/armv8a/tune-cortexa53.inc | 2 ++
  meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc | 2 ++
  2 files changed, 4 insertions(+)
meta/conf/machine/include/arm/armv8a/tune-cortexa53.inc +2 -0
index a88575eb156..65fd6333198 100644
@@ -2,6 +2,8 @@ DEFAULTTUNE ?= "cortexa53"
 
  TUNEVALID[cortexa53] = "Enable Cortex-A53 specific processor optimizations"
  TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'cortexa53', ' -mcpu=cortex-a53', '', d)}"
+# See  https://github.com/llvm/llvm-project/issues/85699
+TUNE_CCARGS_MARCH_OPTS .= "${@bb.utils.contains('TUNE_FEATURES', 'crypto', '', '+nocrypto', d)}"
 
  require conf/machine/include/arm/arch-armv8a.inc
 
meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc +0 -0
index cbb6418c069..cf09db00664 100644

meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc DEFAULTTUNE ?= "cortexa72" · line 7

Quoted 6 lines
meta/conf/machine/include/arm/armv8a/tune-cortexa72.inc +2 -0
@@ -2,6 +2,8 @@ DEFAULTTUNE ?= "cortexa72"
 
  TUNEVALID[cortexa72] = "Enable Cortex-A72 specific processor optimizations"
  TUNE_CCARGS .= "${@bb.utils.contains('TUNE_FEATURES', 'cortexa72', ' -mcpu=cortex-a72', '', d)}"
+# See  https://github.com/llvm/llvm-project/issues/85699
+TUNE_CCARGS_MARCH_OPTS .= "${@bb.utils.contains('TUNE_FEATURES', 'crypto', '', '+nocrypto', d)}"
 

I'm very unfamiliar with the tuning part of the machine configuration files, but isn't that something we could add in

meta/conf/machine/include/arm/feature-arm-crypto.inc

Quoted 7 lines

in the counterpart of +crypto?

I'm just a bit confused by the decision to only touch cortex a53 and a72 tuning files? Reading the DTs and the commit log it seems those are the cores in the RPi 3 and 4 which do not have crypto, but I assume this would be applicable to any SoC without the crypto block anyway no? So should be generic instead?

Yes we could and I think its a better way as well. I was just focussed on rpi but there might be more implementations of these cortex cpus without crypto will send a v2.

Are you aware of the RPi5 having done the

Quoted 2 lines

same cost-cutting measure? It's sporting a76 cores so maybe we need to do something with that too?

pi5 uses BCM2712 SoC which has Armv8 crypto extensions

Quoted 3 lines

Cheers,
Quentin