clk: Fix typos
Subsystems (33)
Arm Qualcomm mailing list Arm i.MX and Layerscape Arm/Amlogic Meson SoC support Common clk +29 more subsystems
PATCH 1/1 clk: Fix typos
From: Bjorn Helgaas <[email protected]>
Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and uses updated).
Signed-off-by Bjorn Helgaas <[email protected]>
--- drivers/clk/baikal-t1/clk-ccu-div.c | 2 +- drivers/clk/baikal-t1/clk-ccu-pll.c | 2 +- drivers/clk/bcm/clk-bcm2835.c | 2 +- drivers/clk/bcm/clk-bcm53573-ilp.c | 2 +- drivers/clk/berlin/berlin2-avpll.c | 2 +- drivers/clk/clk-asm9260.c | 4 ++-- drivers/clk/clk-ast2600.c | 2 +- drivers/clk/clk-axi-clkgen.c | 2 +- drivers/clk/clk-clps711x.c | 2 +- drivers/clk/clk-eyeq.c | 2 +- drivers/clk/clk-gate.c | 2 +- drivers/clk/clk-hsdk-pll.c | 2 +- drivers/clk/clk-s2mps11.c | 2 +- drivers/clk/clk-scmi.c | 2 +- drivers/clk/clk-si5351.c | 6 +++--- drivers/clk/clk-si544.c | 2 +- drivers/clk/clk-si570.c | 4 ++-- drivers/clk/clk-sp7021.c | 2 +- drivers/clk/clk-stm32f4.c | 2 +- drivers/clk/clk-versaclock5.c | 2 +- drivers/clk/clk_test.c | 2 +- drivers/clk/davinci/pll.h | 2 +- drivers/clk/hisilicon/clkgate-separated.c | 16 ++++++++-------- drivers/clk/imx/clk-fixup-div.c | 2 +- drivers/clk/imx/clk-fixup-mux.c | 2 +- drivers/clk/imx/clk-gate-exclusive.c | 2 +- drivers/clk/imx/clk-imx5.c | 2 +- drivers/clk/imx/clk-imx8-acm.c | 2 +- drivers/clk/imx/clk-scu.c | 2 +- drivers/clk/ingenic/cgu.h | 2 +- drivers/clk/meson/axg.c | 2 +- drivers/clk/meson/g12a.c | 6 +++--- drivers/clk/meson/gxbb.c | 2 +- drivers/clk/microchip/clk-core.c | 2 +- drivers/clk/mmp/clk-gate.c | 2 +- drivers/clk/mvebu/armada-xp.c | 5 ++--- drivers/clk/mxs/clk-div.c | 2 +- drivers/clk/nxp/clk-lpc18xx-ccu.c | 2 +- drivers/clk/qcom/gcc-sm8150.c | 6 +++--- drivers/clk/rockchip/clk-cpu.c | 6 +++--- drivers/clk/rockchip/clk-mmc-phase.c | 4 ++-- drivers/clk/rockchip/clk-pll.c | 2 +- drivers/clk/rockchip/clk.h | 2 +- drivers/clk/samsung/clk-cpu.c | 2 +- drivers/clk/samsung/clk-pll.c | 2 +- drivers/clk/sophgo/clk-sg2042-clkgen.c | 2 +- drivers/clk/spear/spear1340_clock.c | 2 +- drivers/clk/sprd/gate.h | 2 +- drivers/clk/sprd/ums512-clk.c | 4 ++-- drivers/clk/starfive/clk-starfive-jh7110-sys.c | 2 +- drivers/clk/stm32/clk-stm32mp1.c | 2 +- drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c | 2 +- drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 2 +- drivers/clk/sunxi-ng/ccu_common.c | 2 +- drivers/clk/tegra/clk-tegra210.c | 2 +- drivers/clk/ti/autoidle.c | 2 +- drivers/clk/ti/clk-43xx.c | 2 +- drivers/clk/ti/mux.c | 2 +- drivers/clk/versatile/clk-icst.c | 2 +- drivers/clk/visconti/pll.c | 2 +- 60 files changed, 80 insertions(+), 81 deletions(-)
drivers/clk/baikal-t1/clk-ccu-div.c +1 -1
@@ -405,7 +405,7 @@ static void ccu_div_clk_unregister(struct ccu_div_data *data, bool defer) {int idx; -/* Uninstall only the clocks registered on the specfied stage */ +/* Uninstall only the clocks registered on the specified stage */ for (idx =0 ; idx < data->divs_num; ++idx) {if (!!(data->divs_info[idx].features &CCU_DIV_BASIC ) ^ defer)continue ;
drivers/clk/baikal-t1/clk-ccu-pll.c +1 -1
@@ -196,7 +196,7 @@ static void ccu_pll_clk_unregister(struct ccu_pll_data *data, bool defer) {int idx; -/* Uninstall only the clocks registered on the specfied stage */ +/* Uninstall only the clocks registered on the specified stage */ for (idx =0 ; idx <CCU_PLL_NUM ; ++idx) {if (!!(pll_info[idx].features &CCU_PLL_BASIC ) ^ defer)continue ;
drivers/clk/bcm/clk-bcm2835.c +1 -1
@@ -1550,7 +1550,7 @@ static const char *const bcm2835_clock_osc_parents[] = { .parents = bcm2835_clock_osc_parents, \ __VA_ARGS__) -/* main peripherial parent mux */ +/* main peripheral parent mux */ static const char *const bcm2835_clock_per_parents[] = {"gnd" ,"xosc" ,
drivers/clk/bcm/clk-bcm53573-ilp.c +1 -1
@@ -59,7 +59,7 @@ static unsigned long bcm53573_ilp_recalc_rate(struct clk_hw *hw,/* * At minimum we should loop for a bit to let hardware do the * measurement. This isn't very accurate however, so for a better -* precision lets try getting 20 different values for and use average. +* precision let's try getting 20 different values and use average. */ while (num <20 ) {regmap_read (regmap,PMU_XTAL_FREQ_RATIO , &cur_val);
drivers/clk/berlin/berlin2-avpll.c +1 -1
@@ -319,7 +319,7 @@ berlin2_avpll_channel_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)/* * AV3 divider start at VCO_CTRL14, bit 7; each 4 bits wide. -* AV2/AV3 form a fractional divider, where only specfic values for AV3 +* AV2/AV3 form a fractional divider, where only specific values for AV3 * are allowed. AV3 != 0 divides by AV2/2, AV3=0 is bypass. */ if (ch->index <6 ) {
drivers/clk/clk-asm9260.c +2 -2
@@ -92,8 +92,8 @@ static const struct asm9260_div_clk asm9260_div_clks[] __initconst = { { CLKID_SYS_CPU, "cpu_div", "main_gate", HW_CPUCLKDIV }, { CLKID_SYS_AHB, "ahb_div", "cpu_div", HW_SYSAHBCLKDIV }, -/* i2s has two deviders: one for only external mclk and internal -* devider for all clks. */ +/* i2s has two dividers: one for only external mclk and internal +* divider for all clks. */ { CLKID_SYS_I2S0M, "i2s0m_div", "i2s0_mclk", HW_I2S0MCLKDIV }, { CLKID_SYS_I2S1M, "i2s1m_div", "i2s1_mclk", HW_I2S1MCLKDIV }, { CLKID_SYS_I2S0S, "i2s0s_div", "i2s0_gate", HW_I2S0SCLKDIV },
drivers/clk/clk-ast2600.c +1 -1
@@ -92,7 +92,7 @@ static u8 soc_rev;* * There are some gates that do not have an associated reset; these are * handled by using -1 as the index for the reset, and the consumer must -* explictly assert/deassert reset lines as required. +* explicitly assert/deassert reset lines as required. * * Clocks marked with CLK_IS_CRITICAL: *
drivers/clk/clk-axi-clkgen.c +1 -1
@@ -172,7 +172,7 @@ static void axi_clkgen_calc_params(const struct axi_clkgen_limits *limits, } } -/* Lets see if we find a better setting in fractional mode */ +/* Let's see if we find a better setting in fractional mode */ if (fract_shift ==0 ) { fract_shift =3 ; goto again;
drivers/clk/clk-clps711x.c +1 -1
@@ -99,7 +99,7 @@ static void __init clps711x_clk_init_dt(struct device_node *np)*/ tmp &= ~(SYSCON1_TC1M |SYSCON1_TC1S );/* Timer2 in prescale mode. -* Value writen is automatically re-loaded when +* Value written is automatically re-loaded when * the counter underflows. */ tmp |=SYSCON1_TC2M |SYSCON1_TC2S ;
drivers/clk/clk-eyeq.c +1 -1
@@ -131,7 +131,7 @@ struct eqc_early_match_data {* Both factors (mult and div) must fit in 32 bits. When an operation overflows, * this function throws away low bits so that factors still fit in 32 bits. * -* Precision loss depends on amplitude of mult and div. Worst theorical +* Precision loss depends on amplitude of mult and div. Worst theoretical * loss is: (UINT_MAX+1) / UINT_MAX - 1 = 2.3e-10. * This is 1Hz every 4.3GHz. */
drivers/clk/clk-gate.c +1 -1
@@ -15,7 +15,7 @@#include <linux/string.h> /** -* DOC: basic gatable clock which can gate and ungate its output +* DOC: basic gateable clock which can gate and ungate its output * * Traits of this clock: * prepare - clk_(un)prepare only ensures parent is (un)prepared
drivers/clk/clk-hsdk-pll.c +1 -1
@@ -265,7 +265,7 @@ static int hsdk_pll_core_update_rate(struct hsdk_pll_clk *clk,return -EINVAL ;/* -* Program divider to div-by-1 if we succesfuly set core clock below +* Program divider to div-by-1 if we successfully set core clock below * 500MHz threshold. */ if (rate <=CORE_IF_CLK_THRESHOLD_HZ )
drivers/clk/clk-s2mps11.c +1 -1
@@ -235,7 +235,7 @@ MODULE_DEVICE_TABLE(platform, s2mps11_clk_id);* through platform_device_id. * * However if device's DT node contains proper clock compatible and driver is -* built as a module, then the *module* matching will be done trough DT aliases. +* built as a module, then the *module* matching will be done through DT aliases. * This requires of_device_id table. In the same time this will not change the * actual *device* matching so do not add .of_match_table. */
drivers/clk/clk-scmi.c +1 -1
@@ -451,7 +451,7 @@ static int scmi_clocks_probe(struct scmi_device *sdev)/* * Note that the scmi_clk_ops_db is on the stack, not global, -* because it cannot be shared between mulitple probe-sequences +* because it cannot be shared between multiple probe-sequences * to avoid sharing the devm_ allocated clk_ops between multiple * SCMI clk driver instances. */
drivers/clk/clk-si5351.c +3 -3
@@ -655,7 +655,7 @@ static int si5351_msynth_determine_rate(struct clk_hw *hw,unsigned long a, b, c;int divby4; -/* multisync6-7 can only handle freqencies < 150MHz */ +/* multisync6-7 can only handle frequencies < 150MHz */ if (hwdata->num >=6 && rate >SI5351_MULTISYNTH67_MAX_FREQ ) rate =SI5351_MULTISYNTH67_MAX_FREQ ;
@@ -1048,11 +1048,11 @@ static int si5351_clkout_determine_rate(struct clk_hw *hw,unsigned long rate = req->rate;unsigned char rdiv; -/* clkout6/7 can only handle output freqencies < 150MHz */ +/* clkout6/7 can only handle output frequencies < 150MHz */ if (hwdata->num >=6 && rate >SI5351_CLKOUT67_MAX_FREQ ) rate =SI5351_CLKOUT67_MAX_FREQ ; -/* clkout freqency is 8kHz - 160MHz */ +/* clkout frequency is 8kHz - 160MHz */ if (rate >SI5351_CLKOUT_MAX_FREQ ) rate =SI5351_CLKOUT_MAX_FREQ ;if (rate <SI5351_CLKOUT_MIN_FREQ )
drivers/clk/clk-si544.c +1 -1
@@ -39,7 +39,7 @@/* Max freq depends on speed grade */ #define SI544_MIN_FREQ 200000U -/* Si544 Internal oscilator runs at 55.05 MHz */ +/* Si544 Internal oscillator runs at 55.05 MHz */ #define FXO 55050000U/* VCO range is 10.8 .. 12.1 GHz, max depends on speed grade */
drivers/clk/clk-si570.c +2 -2
@@ -63,7 +63,7 @@ struct clk_si570_info {* struct clk_si570: * @hw: Clock hw struct * @regmap: Device's regmap -* @div_offset: Rgister offset for dividers +* @div_offset: Register offset for dividers * @info: Device info * @fxtal: Factory xtal frequency * @n1: Clock divider N1
@@ -181,7 +181,7 @@ static int si570_update_rfreq(struct clk_si570 *data) }/** -* si570_calc_divs() - Caluclate clock dividers +* si570_calc_divs() - Calculate clock dividers * @frequency: Target frequency * @data: Driver data structure * @out_rfreq: RFREG fractional multiplier (output)
drivers/clk/clk-sp7021.c +1 -1
@@ -14,7 +14,7 @@#include <dt-bindings/clock/sunplus,sp7021-clkc.h> -/* speical div_width values for PLLTV/PLLA */ +/* special div_width values for PLLTV/PLLA */ #define DIV_TV 33#define DIV_A 34
drivers/clk/clk-stm32f4.c +1 -1
@@ -19,7 +19,7 @@#include <linux/mfd/syscon.h> /* -* Include list of clocks wich are not derived from system clock (SYSCLOCK) +* Include list of clocks which are not derived from system clock (SYSCLOCK) * The index of these clocks is the secondary index of DT bindings * */
drivers/clk/clk-versaclock5.c +1 -1
@@ -136,7 +136,7 @@#define VC5_MAX_FOD_NUM 4/* flags to describe chip features */ -/* chip has built-in oscilator */ +/* chip has built-in oscillator */ #define VC5_HAS_INTERNAL_XTAL BIT(0)/* chip has PFD requency doubler */ #define VC5_HAS_PFD_FREQ_DBL BIT(1)
drivers/clk/clk_test.c +1 -1
@@ -292,7 +292,7 @@ static void clk_test_set_set_get_rate(struct kunit *test) }/* -* Test that clk_round_rate and clk_set_rate are consitent and will +* Test that clk_round_rate and clk_set_rate are consistent and will * return the same frequency. */ static void clk_test_round_set_get_rate (struct kunit *test)
drivers/clk/davinci/pll.h +1 -1
@@ -80,7 +80,7 @@ static const struct davinci_pll_sysclk_info n = { \* @name: The name of the clock * @parent_names: Array of names of the parent clocks * @num_parents: Length of @parent_names -* @table: Array of values to write to OCSEL[OCSRC] cooresponding to +* @table: Array of values to write to OCSEL[OCSRC] corresponding to * @parent_names * @ocsrc_mask: Bitmask for OCSEL[OCSRC] */
drivers/clk/hisilicon/clkgate-separated.c +8 -8
@@ -17,9 +17,9 @@#include "clk.h" /* clock separated gate register offset */ -#define CLKGATE_SEPERATED_ENABLE 0x0 -#define CLKGATE_SEPERATED_DISABLE 0x4 -#define CLKGATE_SEPERATED_STATUS 0x8 +#define CLKGATE_SEPARATED_ENABLE 0x0 +#define CLKGATE_SEPARATED_DISABLE 0x4 +#define CLKGATE_SEPARATED_STATUS 0x8struct clkgate_separated {struct clk_hw hw;
@@ -40,7 +40,7 @@ static int clkgate_separated_enable(struct clk_hw *hw)spin_lock_irqsave (sclk->lock, flags); reg =BIT (sclk->bit_idx);writel_relaxed (reg, sclk->enable); -readl_relaxed (sclk->enable +CLKGATE_SEPERATED_STATUS ); +readl_relaxed (sclk->enable +CLKGATE_SEPARATED_STATUS );if (sclk->lock)spin_unlock_irqrestore (sclk->lock, flags);return 0 ;
@@ -56,8 +56,8 @@ static void clkgate_separated_disable(struct clk_hw *hw)if (sclk->lock)spin_lock_irqsave (sclk->lock, flags); reg =BIT (sclk->bit_idx); -writel_relaxed (reg, sclk->enable +CLKGATE_SEPERATED_DISABLE ); -readl_relaxed (sclk->enable +CLKGATE_SEPERATED_STATUS ); +writel_relaxed (reg, sclk->enable +CLKGATE_SEPARATED_DISABLE ); +readl_relaxed (sclk->enable +CLKGATE_SEPARATED_STATUS );if (sclk->lock)spin_unlock_irqrestore (sclk->lock, flags); }
@@ -68,7 +68,7 @@ static int clkgate_separated_is_enabled(struct clk_hw *hw)u32 reg; sclk = container_of(hw, struct clkgate_separated, hw); - reg =readl_relaxed (sclk->enable +CLKGATE_SEPERATED_STATUS ); + reg =readl_relaxed (sclk->enable +CLKGATE_SEPARATED_STATUS ); reg &=BIT (sclk->bit_idx);return reg ?1 :0 ;
@@ -100,7 +100,7 @@ struct clk *hisi_register_clkgate_sep(struct device *dev, const char *name, init.parent_names = (parent_name ? &parent_name :NULL ); init.num_parents = (parent_name ?1 :0 ); - sclk->enable = reg +CLKGATE_SEPERATED_ENABLE ; + sclk->enable = reg +CLKGATE_SEPARATED_ENABLE ; sclk->bit_idx = bit_idx; sclk->flags = clk_gate_flags; sclk->hw.init = &init;
drivers/clk/imx/clk-fixup-div.c +1 -1
@@ -18,7 +18,7 @@* @fixup: a hook to fixup the write value * * The imx fixup divider clock is a subclass of basic clk_divider -* with an addtional fixup hook. +* with an additional fixup hook. */ struct clk_fixup_div {struct clk_divider divider;
drivers/clk/imx/clk-fixup-mux.c +1 -1
@@ -17,7 +17,7 @@* @fixup: a hook to fixup the write value * * The imx fixup multiplexer clock is a subclass of basic clk_mux -* with an addtional fixup hook. +* with an additional fixup hook. */ struct clk_fixup_mux {struct clk_mux mux;
drivers/clk/imx/clk-gate-exclusive.c +1 -1
@@ -18,7 +18,7 @@* gate clock * * The imx exclusive gate clock is a subclass of basic clk_gate -* with an addtional mask to indicate which other gate bits in the same +* with an additional mask to indicate which other gate bits in the same * register is mutually exclusive to this gate clock. */ struct clk_gate_exclusive {
drivers/clk/imx/clk-imx5.c +1 -1
@@ -454,7 +454,7 @@ static void __init mx51_clocks_init(struct device_node *np)* longer supported. Set to one for better power saving. * * The effect of not setting these bits is that MIPI clocks can't be -* enabled without the IPU clock being enabled aswell. +* enabled without the IPU clock being enabled as well. */ val =readl (MXC_CCM_CCDR ); val |=1 <<18 ;
drivers/clk/imx/clk-imx8-acm.c +1 -1
@@ -22,7 +22,7 @@* struct clk_imx_acm_pm_domains - structure for multi power domain * @pd_dev: power domain device * @pd_dev_link: power domain device link -* @num_domains: power domain nummber +* @num_domains: power domain number */ struct clk_imx_acm_pm_domains {struct device **pd_dev;
drivers/clk/imx/clk-scu.c +1 -1
@@ -729,7 +729,7 @@ struct clk_hw *imx_clk_scu_alloc_dev(const char *name,if (ret) goto put_device; -/* For API backwards compatiblilty, simply return NULL for success */ +/* For API backwards compatibility, simply return NULL for success */ return NULL ; put_device:
drivers/clk/ingenic/cgu.h +1 -1
@@ -239,7 +239,7 @@ ingenic_cgu_new(const struct ingenic_cgu_clk_info *clock_info,* * Register the clocks described by the CGU with the common clock framework. * -* Return: 0 on success or -errno if unsuccesful. +* Return: 0 on success or -errno if unsuccessful. */ int ingenic_cgu_register_clocks (struct ingenic_cgu *cgu);
drivers/clk/meson/axg.c +1 -1
@@ -918,7 +918,7 @@ static const struct clk_parent_data axg_sd_emmc_clk0_parent_data[] = {/* * Following these parent clocks, we should also have had mpll2, mpll3 * and gp0_pll but these clocks are too precious to be used here. All -* the necessary rates for MMC and NAND operation can be acheived using +* the necessary rates for MMC and NAND operation can be achieved using * xtal or fclk_div clocks */ };
drivers/clk/meson/g12a.c +3 -3
@@ -2489,7 +2489,7 @@ static const struct clk_parent_data g12a_sd_emmc_clk0_parent_data[] = {/* * Following these parent clocks, we should also have had mpll2, mpll3 * and gp0_pll but these clocks are too precious to be used here. All -* the necessary rates for MMC and NAND operation can be acheived using +* the necessary rates for MMC and NAND operation can be achieved using * g12a_ee_core or fclk_div clocks */ };
@@ -3753,8 +3753,8 @@ static struct clk_regmap g12a_mipi_dsi_pxclk_sel = { };/* -* FIXME: Force as bypass by forcing a single /1 table entry, and doensn't on boot value -* when setting a clock whith this node in the clock path, but doesn't garantee the divider +* FIXME: Force as bypass by forcing a single /1 table entry, and doesn't on boot value +* when setting a clock with this node in the clock path, but doesn't guarantee the divider * is at /1 at boot until a rate is set. */ static const struct clk_div_table g12a_mipi_dsi_pxclk_div_table[] = {
drivers/clk/meson/gxbb.c +1 -1
@@ -1335,7 +1335,7 @@ static const struct clk_parent_data gxbb_sd_emmc_clk0_parent_data[] = {/* * Following these parent clocks, we should also have had mpll2, mpll3 * and gp0_pll but these clocks are too precious to be used here. All -* the necessary rates for MMC and NAND operation can be acheived using +* the necessary rates for MMC and NAND operation can be achieved using * xtal or fclk_div clocks */ };
drivers/clk/microchip/clk-core.c +1 -1
@@ -326,7 +326,7 @@ static void roclk_calc_div_trim(unsigned long rate,* i.e. fout = fin / 2 * DIV * whereas DIV = rodiv + (rotrim / 512) * -* Since kernel does not perform floating-point arithmatic so +* Since kernel does not perform floating-point arithmetic so * (rotrim/512) will be zero. And DIV & rodiv will result same. * * ie. fout = (fin * 256) / [(512 * rodiv) + rotrim] ... from (1)
drivers/clk/mmp/clk-gate.c +1 -1
@@ -15,7 +15,7 @@#include "clk.h" /* -* Some clocks will have mutiple bits to enable the clocks, and +* Some clocks will have multiple bits to enable the clocks, and * the bits to disable the clock is not same as enabling bits. */
drivers/clk/mvebu/armada-xp.c +2 -3
@@ -7,7 +7,6 @@* Gregory CLEMENT <[email protected]> * Sebastian Hesselbarth <[email protected]> * Andrew Lunn <[email protected]> -* */ #include <linux/kernel.h>
@@ -19,8 +18,8 @@/* * Core Clocks * -* Armada XP Sample At Reset is a 64 bit bitfiled split in two -* register of 32 bits +* Armada XP Sample At Reset is a 64 bit bitfield split in two +* registers of 32 bits */ #define SARL 0/* Low part [0:31] */
drivers/clk/mxs/clk-div.c +1 -1
@@ -16,7 +16,7 @@* @busy: busy bit shift * * The mxs divider clock is a subclass of basic clk_divider with an -* addtional busy bit. +* additional busy bit. */ struct clk_div {struct clk_divider divider;
drivers/clk/nxp/clk-lpc18xx-ccu.c +1 -1
@@ -148,7 +148,7 @@ static int lpc18xx_ccu_gate_endisable(struct clk_hw *hw, bool enable) val |=LPC18XX_CCU_RUN ; }else {/* -* To safely disable a branch clock a squence of two separate +* To safely disable a branch clock a sequence of two separate * writes must be used. First write should set the AUTO bit * and the next write should clear the RUN bit. */
drivers/clk/qcom/gcc-sm8150.c +3 -3
@@ -1245,7 +1245,7 @@ static struct clk_branch gcc_boot_rom_ahb_clk = { };/* -* Clock ON depends on external parent 'config noc', so cant poll +* Clock ON depends on external parent 'config noc', so can't poll * delay and also mark as crtitical for camss boot */ static struct clk_branch gcc_camera_ahb_clk = {
@@ -1398,7 +1398,7 @@ static struct clk_branch gcc_ddrss_gpu_axi_clk = { };/* -* Clock ON depends on external parent 'config noc', so cant poll +* Clock ON depends on external parent 'config noc', so can't poll * delay and also mark as crtitical for disp boot */ static struct clk_branch gcc_disp_ahb_clk = {
@@ -3339,7 +3339,7 @@ static struct clk_branch gcc_usb3_sec_phy_pipe_clk = { };/* -* Clock ON depends on external parent 'config noc', so cant poll +* Clock ON depends on external parent 'config noc', so can't poll * delay and also mark as crtitical for video boot */ static struct clk_branch gcc_video_ahb_clk = {
drivers/clk/rockchip/clk-cpu.c +3 -3
@@ -16,14 +16,14 @@* of the SoC or supplied after the SoC characterization. * * The below implementation of the CPU clock allows the rate changes of the CPU -* clock and the corresponding rate changes of the auxillary clocks of the CPU +* clock and the corresponding rate changes of the auxiliary clocks of the CPU * domain. The platform clock driver provides a clock register configuration * for each configurable rate which is then used to program the clock hardware -* registers to acheive a fast co-oridinated rate change for all the CPU domain +* registers to achieve a fast co-oridinated rate change for all the CPU domain * clocks. * * On a rate change request for the CPU clock, the rate change is propagated -* upto the PLL supplying the clock to the CPU domain clock blocks. While the +* up to the PLL supplying the clock to the CPU domain clock blocks. While the * CPU domain PLL is reconfigured, the CPU domain clocks are driven using an * alternate clock source. If required, the alternate clock source is divided * down in order to keep the output clock rate within the previous OPP limits.
drivers/clk/rockchip/clk-mmc-phase.c +2 -2
@@ -174,11 +174,11 @@ static int rockchip_mmc_clk_rate_notify(struct notifier_block *nb,/* * rockchip_mmc_clk is mostly used by mmc controllers to sample -* the intput data, which expects the fixed phase after the tuning +* the input data, which expects the fixed phase after the tuning * process. However if the clock rate is changed, the phase is stale * and may break the data sampling. So here we try to restore the phase * for that case, except that -* (1) cached_phase is invaild since we inevitably cached it when the +* (1) cached_phase is invalid since we inevitably cached it when the * clock provider be reparented from orphan to its real parent in the * first place. Otherwise we may mess up the initialization of MMC cards * since we only set the default sample phase and drive phase later on.
drivers/clk/rockchip/clk-pll.c +1 -1
@@ -68,7 +68,7 @@ static long rockchip_pll_round_rate(struct clk_hw *hw,const struct rockchip_pll_rate_table *rate_table = pll->rate_table;int i; -/* Assumming rate_table is in descending order */ +/* Assuming rate_table is in descending order */ for (i =0 ; i < pll->rate_count; i++) {if (drate >= rate_table[i].rate)return rate_table[i].rate;
drivers/clk/rockchip/clk.h +1 -1
@@ -532,7 +532,7 @@ struct rockchip_pll_rate_table {* * Flags: * ROCKCHIP_PLL_SYNC_RATE - check rate parameters to match against the -* rate_table parameters and ajust them if necessary. +* rate_table parameters and adjust them if necessary. * ROCKCHIP_PLL_FIXED_MODE - the pll operates in normal mode only */ struct rockchip_pll_clock {
drivers/clk/samsung/clk-cpu.c +1 -1
@@ -243,7 +243,7 @@ static int exynos_cpuclk_pre_rate_change(struct clk_notifier_data *ndata,if (cpuclk->flags &CLK_CPU_NEEDS_DEBUG_ALT_DIV ) {/* * In Exynos4210, ATB clock parent is also mout_core. So -* ATB clock also needs to be mantained at safe speed. +* ATB clock also needs to be maintained at safe speed. */ alt_div |=E4210_DIV0_ATB_MASK ; alt_div_mask |=E4210_DIV0_ATB_MASK ;
drivers/clk/samsung/clk-pll.c +1 -1
@@ -56,7 +56,7 @@ static long samsung_pll_round_rate(struct clk_hw *hw,const struct samsung_pll_rate_table *rate_table = pll->rate_table;int i; -/* Assumming rate_table is in descending order */ +/* Assuming rate_table is in descending order */ for (i =0 ; i < pll->rate_count; i++) {if (drate >= rate_table[i].rate)return rate_table[i].rate;
drivers/clk/sophgo/clk-sg2042-clkgen.c +1 -1
@@ -968,7 +968,7 @@ static int sg2042_mux_notifier_cb(struct notifier_block *nb,/* * "1" is the array index of the second parent input source of * mux. For SG2042, it's fpll for all mux clocks. -* "0" is the array index of the frist parent input source of +* "0" is the array index of the first parent input source of * mux, For SG2042, it's mpll. * FIXME, any good idea to avoid magic number? */
drivers/clk/spear/spear1340_clock.c +1 -1
@@ -199,7 +199,7 @@ static struct frac_rate_tbl amba_synth_rtbl[] = {* We can program this synthesizer to make cpu run on different clock * frequencies. * Following table provides configuration values to let cpu run on 200, -* 250, 332, 400 or 500 MHz considering different possibilites of input +* 250, 332, 400 or 500 MHz considering different possibilities of input * (vco1div2) clock. * * --------------------------------------------------------------------
drivers/clk/sprd/gate.h +1 -1
@@ -26,7 +26,7 @@ struct sprd_gate {* CLK_GATE_BIG_ENDIAN BIT(2) * so we define new flags from BIT(3) */ -#define SPRD_GATE_NON_AON BIT(3)/* not alway powered on, check before read */ +#define SPRD_GATE_NON_AON BIT(3)/* not always powered on, check before read */ #define SPRD_SC_GATE_CLK_HW_INIT_FN(_struct, _name, _parent, _reg, \ _sc_offset, _enable_mask, _flags, \
drivers/clk/sprd/ums512-clk.c +2 -2
@@ -1550,7 +1550,7 @@ static struct sprd_clk_desc ums512_aon_gate_desc = {/* audcp apb gates */ /* Audcp apb clocks configure CLK_IGNORE_UNUSED because these clocks may be -* controlled by audcp sys at the same time. It may be cause an execption if +* controlled by audcp sys at the same time. It may cause an exception if * kernel gates these clock. */ static SPRD_SC_GATE_CLK_HW(audcp_wdg_eb, "audcp-wdg-eb",
@@ -1592,7 +1592,7 @@ static const struct sprd_clk_desc ums512_audcpapb_gate_desc = {/* audcp ahb gates */ /* Audcp aphb clocks configure CLK_IGNORE_UNUSED because these clocks may be -* controlled by audcp sys at the same time. It may be cause an execption if +* controlled by audcp sys at the same time. It may cause an exception if * kernel gates these clock. */ static SPRD_SC_GATE_CLK_HW(audcp_iis0_eb, "audcp-iis0-eb",
drivers/clk/starfive/clk-starfive-jh7110-sys.c +1 -1
@@ -376,7 +376,7 @@ EXPORT_SYMBOL_GPL(jh7110_reset_controller_register);/* * This clock notifier is called when the rate of PLL0 clock is to be changed. -* The cpu_root clock should save the curent parent clock and switch its parent +* The cpu_root clock should save the current parent clock and switch its parent * clock to osc before PLL0 rate will be changed. Then switch its parent clock * back after the PLL0 rate is completed. */
drivers/clk/stm32/clk-stm32mp1.c +1 -1
@@ -2041,7 +2041,7 @@ static const struct clock_config stm32mp1_clock_cfg[] = {KCLK (ADFSDM_K ,"adfsdm_k" , sai_src,0 ,G_ADFSDM ,M_SAI1 ),KCLK (USBO_K ,"usbo_k" , usbo_src,0 ,G_USBO ,M_USBO ), -/* Particulary Kernel Clocks (no mux or no gate) */ +/* Particularly Kernel Clocks (no mux or no gate) */ MGATE_MP1 (DFSDM_K ,"dfsdm_k" ,"ck_mcu" ,0 ,G_DFSDM ),MGATE_MP1 (DSI_PX ,"dsi_px" ,"pll4_q" ,CLK_SET_RATE_PARENT ,G_DSI ), MGATE_MP1(LTDC_PX, "ltdc_px", "pll4_q", CLK_SET_RATE_PARENT, G_LTDC),
drivers/clk/sunxi-ng/ccu-sun50i-h6-r.c +1 -1
@@ -80,7 +80,7 @@ static struct ccu_div r_apb2_clk = {* in the BSP source code, although most of them are unused. The existence * of the hardware block is verified with "3.1 Memory Mapping" chapter in * "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified -* with "3.3.2.1 System Bus Tree" chapter inthe same document. +* with "3.3.2.1 System Bus Tree" chapter in the same document. */ static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1", 0x11c, BIT(0), 0);
drivers/clk/sunxi-ng/ccu-sun8i-r40.c +1 -1
@@ -439,7 +439,7 @@ static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x06c, BIT(3), 0);/* -* In datasheet here's "Reserved", however the gate exists in BSP soucre +* In datasheet here's "Reserved", however the gate exists in BSP source * code. */ static SUNXI_CCU_GATE(bus_can_clk, "bus-can", "apb2",
drivers/clk/sunxi-ng/ccu_common.c +1 -1
@@ -66,7 +66,7 @@ EXPORT_SYMBOL_NS_GPL(ccu_is_better_rate, "SUNXI_CCU");* changed. In common PLL designs, changes to the dividers take effect * almost immediately, while changes to the multipliers (implemented * as dividers in the feedback loop) take a few cycles to work into -* the feedback loop for the PLL to stablize. +* the feedback loop for the PLL to stabilize. * * Sometimes when the PLL clock rate is changed, the decrease in the * divider is too much for the decrease in the multiplier to catch up.
drivers/clk/tegra/clk-tegra210.c +1 -1
@@ -255,7 +255,7 @@/* VIC register to handle during MBIST WAR */ #define NV_PVIC_THI_SLCG_OVERRIDE_LOW 0x8c -/* APE, DISPA and VIC base addesses needed for MBIST WAR */ +/* APE, DISPA and VIC base addresses needed for MBIST WAR */ #define TEGRA210_AHUB_BASE 0x702d0000#define TEGRA210_DISPA_BASE 0x54200000#define TEGRA210_VIC_BASE 0x54340000
drivers/clk/ti/autoidle.c +1 -1
@@ -30,7 +30,7 @@ static LIST_HEAD(autoidle_clks);/* * we have some non-atomic read/write -* operations behind it, so lets +* operations behind it, so let's * take one lock for handling autoidle * of all clocks */
drivers/clk/ti/clk-43xx.c +1 -1
@@ -286,7 +286,7 @@ int __init am43xx_dt_clk_init(void)/* * cpsw_cpts_rft_clk has got the choice of 3 clocksources * dpll_core_m4_ck, dpll_core_m5_ck and dpll_disp_m2_ck. -* By default dpll_core_m4_ck is selected, witn this as clock +* By default dpll_core_m4_ck is selected, with this as clock * source the CPTS doesnot work properly. It gives clockcheck errors * while running PTP. * clockcheck: clock jumped backward or running slower than expected!
drivers/clk/ti/mux.c +1 -1
@@ -84,7 +84,7 @@ static int ti_clk_mux_set_parent(struct clk_hw *hw, u8 index) }/** -* clk_mux_save_context - Save the parent selcted in the mux +* clk_mux_save_context - Save the parent selected in the mux * @hw: pointer struct clk_hw * * Save the parent mux value.
drivers/clk/versatile/clk-icst.c +1 -1
@@ -194,7 +194,7 @@ static int vco_set(struct clk_icst *icst, struct icst_vco vco)pr_err ("ICST error: tried to use RDW != 22\n" );break ;default : -/* Regular auxilary oscillator */ +/* Regular auxiliary oscillator */ mask =VERSATILE_AUX_OSC_BITS ; val = vco.v | (vco.r <<9 ) | (vco.s <<16 );break ;
drivers/clk/visconti/pll.c +1 -1
@@ -107,7 +107,7 @@ static long visconti_pll_round_rate(struct clk_hw *hw,const struct visconti_pll_rate_table *rate_table = pll->rate_table;int i; -/* Assumming rate_table is in descending order */ +/* Assuming rate_table is in descending order */ for (i =0 ; i < pll->rate_count; i++)if (rate >= rate_table[i].rate)return rate_table[i].rate;
Signature · 1 line
2.43.0
Quoting Bjorn Helgaas (2025-07-23 13:38:10)
Quoted 7 lines
From: Bjorn Helgaas <[email protected]>
Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and uses updated).
Signed-off-by Bjorn Helgaas <[email protected]>---
Applied to clk-next