Skip to contentSkip to conversation

FAILED: patch "[PATCH] usb: typec: tcpm: apply vbus before data bringup in" failed to apply to 6.12-stable tree

PATCH New [email protected] 2 participants 4 messages Jul 8, 2025 – Jul 24, 2025

Subsystems (4)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x bec15191d52300defa282e3fd83820f69e447116
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025070813-unwoven-idealness-eaa2@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From bec15191d52300defa282e3fd83820f69e447116 Mon Sep 17 00:00:00 2001
From: RD Babiera <[email protected]>
Date: Wed, 18 Jun 2025 23:06:04 +0000
Subject: [PATCH] usb: typec: tcpm: apply vbus before data bringup in
tcpm_src_attach

This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect SNKAS.

tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance testers can interpret the TryWait.Src to Attached.Src transition after Try.Snk as being in Attached.Src the entire time, so ~170ms is lost to the debounce timer.

Setting the data role can be a costly operation in host mode, and when completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4 to fail.

Turn VBUS on before tcpm_set_roles to meet timing requirement.

drivers/usb/typec/tcpm/tcpm.c +17 -17
index 1a1f9e1f8e4e..1f6fdfaa34bf 100644
@@ -4410,17 +4410,6 @@ static int tcpm_src_attach(struct tcpm_port *port)
 
 	tcpm_enable_auto_vbus_discharge(port, true);
 
-	ret = tcpm_set_roles(port, true, TYPEC_STATE_USB,
-			     TYPEC_SOURCE, tcpm_data_role_for_source(port));
-	if (ret < 0)
-		return ret;
-
-	if (port->pd_supported) {
-		ret = port->tcpc->set_pd_rx(port->tcpc, true);
-		if (ret < 0)
-			goto out_disable_mux;
-	}
-
 	/*
 	 * USB Type-C specification, version 1.2,
 	 * chapter 4.5.2.2.8.1 (Attached.SRC Requirements)
@@ -4430,13 +4419,24 @@ static int tcpm_src_attach(struct tcpm_port *port)
 	    (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) {
 		ret = tcpm_set_vconn(port, true);
 		if (ret < 0)
-			goto out_disable_pd;
+			return ret;
 	}
 
 	ret = tcpm_set_vbus(port, true);
 	if (ret < 0)
 		goto out_disable_vconn;
 
+	ret = tcpm_set_roles(port, true, TYPEC_STATE_USB, TYPEC_SOURCE,
+			     tcpm_data_role_for_source(port));
+	if (ret < 0)
+		goto out_disable_vbus;
+
+	if (port->pd_supported) {
+		ret = port->tcpc->set_pd_rx(port->tcpc, true);
+		if (ret < 0)
+			goto out_disable_mux;
+	}
+
 	port->pd_capable = false;
 
 	port->partner = NULL;
@@ -4447,14 +4447,14 @@ static int tcpm_src_attach(struct tcpm_port *port)
 
 	return 0;
 
-out_disable_vconn:
-	tcpm_set_vconn(port, false);
-out_disable_pd:
-	if (port->pd_supported)
-		port->tcpc->set_pd_rx(port->tcpc, false);
 out_disable_mux:
 	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
 		     TYPEC_ORIENTATION_NONE);
+out_disable_vbus:
+	tcpm_set_vbus(port, false);
+out_disable_vconn:
+	tcpm_set_vconn(port, false);
+
 	return ret;
 }
 
maintainer
#1 lore raw

PATCH 1/3 usb: typec: tcpm: allow to use sink in accessory mode

From: Michael Grzeschik <[email protected]>

[ Upstream commit 64843d0ba96d3eae297025562111d57585273366 ]

Since the function tcpm_acc_attach is not setting the data and role for for the sink case we extend it to check for it first.

Stable-dep-of: bec15191d523 ("usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach")

---
 drivers/usb/typec/tcpm/tcpm.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/usb/typec/tcpm/tcpm.c +7 -2
index 9838a2c8c1b85..c72b108199c40 100644
@@ -4537,12 +4537,17 @@ static void tcpm_snk_detach(struct tcpm_port *port)
 static int tcpm_acc_attach(struct tcpm_port *port)
 {
 	int ret;
+	enum typec_role role;
+	enum typec_data_role data;
 
 	if (port->attached)
 		return 0;
 
-	ret = tcpm_set_roles(port, true, TYPEC_SOURCE,
-			     tcpm_data_role_for_source(port));
+	role = tcpm_port_is_sink(port) ? TYPEC_SINK : TYPEC_SOURCE;
+	data = tcpm_port_is_sink(port) ? tcpm_data_role_for_sink(port)
+				       : tcpm_data_role_for_source(port);
+
+	ret = tcpm_set_roles(port, true, role, data);
 	if (ret < 0)
 		return ret;
 
Signature · 1 line
2.39.5
maintainer
#2 lore raw

PATCH 2/3 usb: typec: tcpm: allow switching to mode accessory to mux properly

From: Michael Grzeschik <[email protected]>

[ Upstream commit 8a50da849151e7e12b43c1d8fe7ad302223aef6b ]

The funciton tcpm_acc_attach is not setting the proper state when calling tcpm_set_role. The function tcpm_set_role is currently only handling TYPEC_STATE_USB. For the tcpm_acc_attach to switch into other modal states tcpm_set_role needs to be extended by an extra state parameter. This patch is handling the proper state change when calling tcpm_acc_attach.

Stable-dep-of: bec15191d523 ("usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach")

---
 drivers/usb/typec/tcpm/tcpm.c | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)
drivers/usb/typec/tcpm/tcpm.c +18 -9
index c72b108199c40..e4ecd5ac95c23 100644
@@ -1132,7 +1132,7 @@ static int tcpm_set_attached_state(struct tcpm_port *port, bool attached)
 				     port->data_role);
 }
 
-static int tcpm_set_roles(struct tcpm_port *port, bool attached,
+static int tcpm_set_roles(struct tcpm_port *port, bool attached, int state,
 			  enum typec_role role, enum typec_data_role data)
 {
 	enum typec_orientation orientation;
@@ -1169,7 +1169,7 @@ static int tcpm_set_roles(struct tcpm_port *port, bool attached,
 		}
 	}
 
-	ret = tcpm_mux_set(port, TYPEC_STATE_USB, usb_role, orientation);
+	ret = tcpm_mux_set(port, state, usb_role, orientation);
 	if (ret < 0)
 		return ret;
 
@@ -4339,7 +4339,8 @@ static int tcpm_src_attach(struct tcpm_port *port)
 
 	tcpm_enable_auto_vbus_discharge(port, true);
 
-	ret = tcpm_set_roles(port, true, TYPEC_SOURCE, tcpm_data_role_for_source(port));
+	ret = tcpm_set_roles(port, true, TYPEC_STATE_USB,
+			     TYPEC_SOURCE, tcpm_data_role_for_source(port));
 	if (ret < 0)
 		return ret;
 
@@ -4514,7 +4515,8 @@ static int tcpm_snk_attach(struct tcpm_port *port)
 
 	tcpm_enable_auto_vbus_discharge(port, true);
 
-	ret = tcpm_set_roles(port, true, TYPEC_SINK, tcpm_data_role_for_sink(port));
+	ret = tcpm_set_roles(port, true, TYPEC_STATE_USB,
+			     TYPEC_SINK, tcpm_data_role_for_sink(port));
 	if (ret < 0)
 		return ret;
 
@@ -4539,6 +4541,7 @@ static int tcpm_acc_attach(struct tcpm_port *port)
 	int ret;
 	enum typec_role role;
 	enum typec_data_role data;
+	int state = TYPEC_STATE_USB;
 
 	if (port->attached)
 		return 0;
@@ -4547,7 +4550,13 @@ static int tcpm_acc_attach(struct tcpm_port *port)
 	data = tcpm_port_is_sink(port) ? tcpm_data_role_for_sink(port)
 				       : tcpm_data_role_for_source(port);
 
-	ret = tcpm_set_roles(port, true, role, data);
+	if (tcpm_port_is_audio(port))
+		state = TYPEC_MODE_AUDIO;
+
+	if (tcpm_port_is_debug(port))
+		state = TYPEC_MODE_DEBUG;
+
+	ret = tcpm_set_roles(port, true, state, role, data);
 	if (ret < 0)
 		return ret;
 
@@ -5306,7 +5315,7 @@ static void run_state_machine(struct tcpm_port *port)
 		 */
 		tcpm_set_vconn(port, false);
 		tcpm_set_vbus(port, false);
-		tcpm_set_roles(port, port->self_powered, TYPEC_SOURCE,
+		tcpm_set_roles(port, port->self_powered, TYPEC_STATE_USB, TYPEC_SOURCE,
 			       tcpm_data_role_for_source(port));
 		/*
 		 * If tcpc fails to notify vbus off, TCPM will wait for PD_T_SAFE_0V +
@@ -5338,7 +5347,7 @@ static void run_state_machine(struct tcpm_port *port)
 		tcpm_set_vconn(port, false);
 		if (port->pd_capable)
 			tcpm_set_charge(port, false);
-		tcpm_set_roles(port, port->self_powered, TYPEC_SINK,
+		tcpm_set_roles(port, port->self_powered, TYPEC_STATE_USB, TYPEC_SINK,
 			       tcpm_data_role_for_sink(port));
 		/*
 		 * VBUS may or may not toggle, depending on the adapter.
@@ -5462,10 +5471,10 @@ static void run_state_machine(struct tcpm_port *port)
 	case DR_SWAP_CHANGE_DR:
 		tcpm_unregister_altmodes(port);
 		if (port->data_role == TYPEC_HOST)
-			tcpm_set_roles(port, true, port->pwr_role,
+			tcpm_set_roles(port, true, TYPEC_STATE_USB, port->pwr_role,
 				       TYPEC_DEVICE);
 		else
-			tcpm_set_roles(port, true, port->pwr_role,
+			tcpm_set_roles(port, true, TYPEC_STATE_USB, port->pwr_role,
 				       TYPEC_HOST);
 		tcpm_ams_finish(port);
 		tcpm_set_state(port, ready_state(port), 0);
Signature · 1 line
2.39.5
maintainer
#3 lore raw

PATCH 3/3 usb: typec: tcpm: apply vbus before data bringup in tcpm_src_attach

In reply to Sasha Levin

From: RD Babiera <[email protected]>

[ Upstream commit bec15191d52300defa282e3fd83820f69e447116 ]

This patch fixes Type-C compliance test TD 4.7.6 - Try.SNK DRP Connect SNKAS.

tVbusON has a limit of 275ms when entering SRC_ATTACHED. Compliance testers can interpret the TryWait.Src to Attached.Src transition after Try.Snk as being in Attached.Src the entire time, so ~170ms is lost to the debounce timer.

Setting the data role can be a costly operation in host mode, and when completed after 100ms can cause Type-C compliance test check TD 4.7.5.V.4 to fail.

Turn VBUS on before tcpm_set_roles to meet timing requirement.

---
 drivers/usb/typec/tcpm/tcpm.c | 34 +++++++++++++++++-----------------
 1 file changed, 17 insertions(+), 17 deletions(-)
drivers/usb/typec/tcpm/tcpm.c +17 -17
index e4ecd5ac95c23..aa2fa720af155 100644
@@ -4339,17 +4339,6 @@ static int tcpm_src_attach(struct tcpm_port *port)
 
 	tcpm_enable_auto_vbus_discharge(port, true);
 
-	ret = tcpm_set_roles(port, true, TYPEC_STATE_USB,
-			     TYPEC_SOURCE, tcpm_data_role_for_source(port));
-	if (ret < 0)
-		return ret;
-
-	if (port->pd_supported) {
-		ret = port->tcpc->set_pd_rx(port->tcpc, true);
-		if (ret < 0)
-			goto out_disable_mux;
-	}
-
 	/*
 	 * USB Type-C specification, version 1.2,
 	 * chapter 4.5.2.2.8.1 (Attached.SRC Requirements)
@@ -4359,13 +4348,24 @@ static int tcpm_src_attach(struct tcpm_port *port)
 	    (polarity == TYPEC_POLARITY_CC2 && port->cc1 == TYPEC_CC_RA)) {
 		ret = tcpm_set_vconn(port, true);
 		if (ret < 0)
-			goto out_disable_pd;
+			return ret;
 	}
 
 	ret = tcpm_set_vbus(port, true);
 	if (ret < 0)
 		goto out_disable_vconn;
 
+	ret = tcpm_set_roles(port, true, TYPEC_STATE_USB, TYPEC_SOURCE,
+			     tcpm_data_role_for_source(port));
+	if (ret < 0)
+		goto out_disable_vbus;
+
+	if (port->pd_supported) {
+		ret = port->tcpc->set_pd_rx(port->tcpc, true);
+		if (ret < 0)
+			goto out_disable_mux;
+	}
+
 	port->pd_capable = false;
 
 	port->partner = NULL;
@@ -4376,14 +4376,14 @@ static int tcpm_src_attach(struct tcpm_port *port)
 
 	return 0;
 
-out_disable_vconn:
-	tcpm_set_vconn(port, false);
-out_disable_pd:
-	if (port->pd_supported)
-		port->tcpc->set_pd_rx(port->tcpc, false);
 out_disable_mux:
 	tcpm_mux_set(port, TYPEC_STATE_SAFE, USB_ROLE_NONE,
 		     TYPEC_ORIENTATION_NONE);
+out_disable_vbus:
+	tcpm_set_vbus(port, false);
+out_disable_vconn:
+	tcpm_set_vconn(port, false);
+
 	return ret;
 }
 
Signature · 1 line
2.39.5