AMD/Xilinx/FPGA changes for 2025-10-rc1-v
Hi,
I am sending you another series of patches for rc1. Gitlab CI is not showing any issue. The biggest is FPGA series and there is on patch revert in spi which should get to tree. I have some other patches pending but I want to give others more time for review that's why will apply them in future.
Thanks,
Michal
The following changes since commit 3532f1f5edfc97c9dcea723cdeb732eda44bc669:
block: Remove blk_find_first/next (2025-07-23 17:37:14 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
tags/xilinx-for-v2025.10-rc1-v2
for you to fetch changes up to 27fa1e2c1794cc589d72d485488c0bbb3b877f09:
firmware: zynqmp: Simplify power-domain driver bind (2025-07-24 09:06:52 +0200)
----------------------------------------------------------------
AMD/Xilinx/FPGA changes for v2025.10-rc1 v2
zynqmp:
- Generate fit-dtb.blob all the time
- Simplify power-domain driver bind
zynqmp_mini:
- Remove PSCI_RESET
fpga:
- Improve user feedback in case of FPGA bitstream load failure
misc:
- Fix kernel-doc in gpio zynq and axi_mrmac
spi:
- Revert fix in STIG mode
----------------------------------------------------------------
Michal Simek (3):
xilinx: zynqmp: Remove PSCI_RESET from mini configurations
arm64: zynqmp: Let fit-dtb.blob generated all the time
firmware: zynqmp: Simplify power-domain driver bind
Pieter Van Trappen (6):
cmd: fpga: improve user feedback in case of bitstream load failure
drivers: fpga: add Kconfig dependency
drivers: fpga: correct compiler errors and warnings
drivers: fpga: cleanup printf usage
drivers: fpga: fix function declaration without a prototype
configs: enable FPGA commands and drivers at sandbox_defconfig
Prasanth Babu Mantena (1):
Revert "spi: cadence_qspi: Fix odd byte write issue in STIG mode"
Venkatesh Yadav Abbarapu (2):
gpio: zynq: Fix the documentation warning in zynq_gpio_get_bank_pin
net: xilinx: Fix kernel-doc for axi_mrmac function parameters
arch/arm/dts/zynqmp-binman-som.dts | 2 +- cmd/fpga.c | 101 +++++++-------- configs/sandbox_defconfig | 20 +++ configs/xilinx_zynqmp_mini_defconfig | 1 + configs/xilinx_zynqmp_mini_emmc0_defconfig | 1 + configs/xilinx_zynqmp_mini_emmc1_defconfig | 1 + configs/xilinx_zynqmp_mini_nand_defconfig | 1 + configs/xilinx_zynqmp_mini_nand_single_defconfig | 1 + drivers/firmware/firmware-zynqmp.c | 7 +- drivers/fpga/ACEX1K.c | 1 + drivers/fpga/Kconfig | 1 + drivers/fpga/fpga.c | 103 +++++++-------- drivers/fpga/ivm_core.c | 13 +- drivers/fpga/lattice.c | 4 +- drivers/fpga/spartan2.c | 1 + drivers/fpga/stratixII.c | 132 +++++++++----------- drivers/fpga/stratixv.c | 2 +- drivers/fpga/versalpl.c | 1 - drivers/fpga/virtex2.c | 2 + drivers/fpga/xilinx.c | 2 +- drivers/fpga/zynqmppl.c | 4 +- drivers/fpga/zynqpl.c | 4 +- drivers/gpio/zynq_gpio.c | 1 + drivers/net/xilinx_axi_mrmac.c | 4 +- drivers/spi/cadence_qspi_apb.c | 3 - include/fpga.h | 2 +- include/stratixII.h | 6 +- 27 files changed, 209 insertions(+), 212 deletions(-)
Quoted 50 lines · Michal Simek
Hi,
I am sending you another series of patches for rc1. Gitlab CI is not showing any issue. The biggest is FPGA series and there is on patch revert in spi which should get to tree.
I have some other patches pending but I want to give others more time for review that's why will apply them in future.Thanks,
MichalThe following changes since commit
3532f1f5edfc97c9dcea723cdeb732eda44bc669:block: Remove blk_find_first/next (2025-07-23 17:37:14 -0600)
are available in the Git repository at:
https://source.denx.de/u-boot/custodians/u-boot-microblaze.git
tags/xilinx-for-v2025.10-rc1-v2for you to fetch changes up to
27fa1e2c1794cc589d72d485488c0bbb3b877f09:firmware: zynqmp: Simplify power-domain driver bind (2025-07-24 09:06:52 +0200)
----------------------------------------------------------------
AMD/Xilinx/FPGA changes for v2025.10-rc1 v2zynqmp:
- Generate fit-dtb.blob all the time
- Simplify power-domain driver bind
zynqmp_mini:
- RemovePSCI_RESETfpga:
- Improve user feedback in case of FPGA bitstream load failuremisc:
- Fix kernel-doc in gpio zynq andaxi_mrmacspi:
- Revert fix in STIG mode----------------------------------------------------------------
Michal Simek (3):
xilinx: zynqmp: RemovePSCI_RESETfrom mini configurations
arm64: zynqmp: Let fit-dtb.blob generated all the time
firmware: zynqmp: Simplify power-domain driver bind
Quoted 7 lines
Pieter Van Trappen (6):
cmd: fpga: improve user feedback in case of bitstream load failure
drivers: fpga: addKconfigdependency
drivers: fpga: correct compiler errors and warnings
drivers: fpga: cleanup printf usage
drivers: fpga: fix function declaration without a prototype
configs: enable FPGA commands and drivers atsandbox_defconfig
So here's a real fun problem that for now I've just worked around by
disabling CONFIG_FPGA_VERSALPL=y on sandbox. One of the tests that's in
Azure but not Gitlab is building sandbox with clang with ASAN (AddressSanitizer) support enabled. And only in that configuration do we
see this build failure:/usr/bin/ld: /tmp/lto-llvm-3b170f.o: in function `versal_load':
drivers/fpga/versalpl.c:(.text.versal_load+0x11d): undefined reference to `xilinx_pm_request'
clang-18: error: linker command failed with exit code 1 (use -v to see invocation)
This function is defined in drivers/firmware/firmware-zynqmp.c (requires CONFIG_ZYNQMP_FIRMWARE, which can't build on sandbox) and a weak do-nothing in drivers/mmc/zynq_sdhci.c (can't build on sandbox).
I don't know why clang trips up on this, but gcc does not. But in the end, now that this series has been applied I'll do a further "Tighten up..." patch on drivers/fpga/Kconfig and update drivers/fpga/versalpl.c and drivers/fpga/zynqmppl.c to depend on ZYNQMP_FIRMWARE.
I'm testing the rest of this PR still, I just wanted to note this part now while I've dug it out.
Signature · 1 line
Tom
Quoted 10 lines · Michal Simek
I am sending you another series of patches for rc1. Gitlab CI is not showing any issue. The biggest is FPGA series and there is on patch revert in spi which should get to tree.
I have some other patches pending but I want to give others more time for review that's why will apply them in future.Thanks,
Michal[...]
Merged into u-boot/master, thanks!
Signature · 1 line
Tom