Add Ayn EC Platform Driver
Subsystems (2)
cover Add Ayn EC Platform Driver
Adds platform driver for Ayn Loki and Tactoy Zeenix handheld devices. Tactoy devices are rebranded Ayn devices with minor modifications to the DMI. The device EC had multiple features implemented by this driver, including a PWN fan with manual and EC controlled automatic modes as well as a user deviced fan curve mode, temperature sensors, and chassis RGB control.
This driver implements PWN fan and temperature control via a hwmon interface, and an RGB chassis interface via a multicolor LED class device. I attempted to break the driver up into four logical patches. Patch 1 adds PWM fan control via a hwmon interface. Patch 2 expands the hwmon interface by adding the temperature sensors. Patch 3 adds the chassis RGB interface through the leds subsystem. Patch for adds ABI documentation for the sysfs entries that aren't provided by the standard interfaces, but are needed to fully control the device.
Derek J. Clark (4):
platform/x86: (ayn-ec) Add PWM Fan HWMON Interface platform/x86: (ayn-ec) Add Temperature Sensors platform/x86: (ayn-ec) Add RGB Interface platform/x86: (ayn-ec) Add Ayn EC Platform Documentation
.../ABI/testing/sysfs-platform-ayn-ec | 59 ++ MAINTAINERS | 7 + drivers/platform/x86/Kconfig | 14 + drivers/platform/x86/Makefile | 3 + drivers/platform/x86/ayn-ec.c | 967 ++++++++++++++++++ 5 files changed, 1050 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-platform-ayn-ec create mode 100644 drivers/platform/x86/ayn-ec.c
Signature · 1 line
2.50.0