Skip to contentSkip to conversation

platform/x86: int3472: Increase ov08x40 handshake GPIO delay to 45 ms

PATCH In review Hans de Goede 4 participants 8 messages Jul 25, 2025 – Aug 19, 2025

Subsystems (2)
lore
Share & tools
lore

Hans de Goede

author maintainer
#0 lore raw

v2 cover platform/x86: int3472: Increase ov08x40 handshake GPIO delay to 45 ms

Hi All,

Here is v2 of the patch-series to fix ov08x40 based cameras not working on several HP laptop models.

Changes in v2:
- Convert int3472_gpio_map to use C99 initializers
- s/enable_time/enable_time_us/
- Move enable_time above con_id for better struct packing

Regards,

Hans

Hans de Goede (3):
platform/x86: int3472: Convert int3472_gpio_map to use C99
initializers
platform/x86: int3472: Rework regulator enable-time handling platform/x86: int3472: Increase ov08x40 handshake GPIO delay to 45 ms

 drivers/platform/x86/intel/int3472/discrete.c | 58 ++++++++++++-------
 1 file changed, 38 insertions(+), 20 deletions(-)
Signature · 1 line
2.49.0
author maintainer
#1 lore raw

PATCH v2 1/3 platform/x86: int3472: Convert int3472_gpio_map to use C99 initializers

Convert int3472_gpio_map to use C99 initializers to make it clearer which struct field is set to which value.

---
 drivers/platform/x86/intel/int3472/discrete.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +12 -4
index 4c0aed6e626f..4ffd7330e9ea 100644
@@ -142,10 +142,18 @@ struct int3472_gpio_map {
 };
 
 static const struct int3472_gpio_map int3472_gpio_map[] = {
-	/* mt9m114 designs declare a powerdown pin which controls the regulators */
-	{ "INT33F0", INT3472_GPIO_TYPE_POWERDOWN, INT3472_GPIO_TYPE_POWER_ENABLE, false, "vdd" },
-	/* ov7251 driver / DT-bindings expect "enable" as con_id for reset */
-	{ "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" },
+	{	/* mt9m114 designs declare a powerdown pin which controls the regulators */
+		.hid = "INT33F0",
+		.type_from = INT3472_GPIO_TYPE_POWERDOWN,
+		.type_to = INT3472_GPIO_TYPE_POWER_ENABLE,
+		.con_id = "vdd",
+	},
+	{	/* ov7251 driver / DT-bindings expect "enable" as con_id for reset */
+		.hid = "INT347E",
+		.type_from = INT3472_GPIO_TYPE_RESET,
+		.type_to = INT3472_GPIO_TYPE_RESET,
+		.con_id = "enable"
+	},
 };
 
 static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3472, u8 *type,
Signature · 1 line
2.49.0
#2 lore raw

Re: [PATCH v2 1/3] platform/x86: int3472: Convert int3472_gpio_map to use C99 initializers

Quoted 3 lines · Hans de Goede

Convert int3472_gpio_map to use C99 initializers to make it clearer which struct field is set to which value.

...

drivers/platform/x86/intel/int3472/discrete.c struct int3472_gpio_map { · line 155

Quoted 5 lines
drivers/platform/x86/intel/int3472/discrete.c +5 -0
+       {       /* ov7251 driver / DT-bindings expect "enable" as con_id for reset */
+               .hid = "INT347E",
+               .type_from = INT3472_GPIO_TYPE_RESET,
+               .type_to = INT3472_GPIO_TYPE_RESET,
+               .con_id = "enable"

+ comma. But no need to resend just for that reason, I hope Ilpo can tweak it whilst applying.

Quoted 2 lines

+ },
};

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#3 lore raw

PATCH v2 2/3 platform/x86: int3472: Rework regulator enable-time handling

In reply to Hans de Goede

Instead of hardcoding the regulator enable-time for INT3472_GPIO_TYPE- POWER_ENABLE and -HANDSHAKE, make int3472_get_con_id_and_polarity() set the enable-time.

This will allow overriding the enable time through quirks in the int3472_gpio_map[].

---
Changes in v2:
- s/enable_time/enable_time_us/
- Move enable_time above con_id for better struct packing

---
 drivers/platform/x86/intel/int3472/discrete.c | 35 ++++++++++---------
 1 file changed, 19 insertions(+), 16 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +19 -16
index 4ffd7330e9ea..74239ce38805 100644
@@ -129,6 +129,7 @@ skl_int3472_gpiod_get_from_temp_lookup(struct int3472_discrete_device *int3472,
  * @hid: The ACPI HID of the device without the instance number e.g. INT347E
  * @type_from: The GPIO type from ACPI ?SDT
  * @type_to: The assigned GPIO type, typically same as @type_from
+ * @enable_time_us: Enable time in usec for GPIOs mapped to regulators
  * @con_id: The name of the GPIO for the device
  * @polarity_low: GPIO_ACTIVE_LOW true if the @polarity_low is true,
  * GPIO_ACTIVE_HIGH otherwise
@@ -138,6 +139,7 @@ struct int3472_gpio_map {
 	u8 type_from;
 	u8 type_to;
 	bool polarity_low;
+	unsigned int enable_time_us;
 	const char *con_id;
 };
 
@@ -147,6 +149,7 @@ static const struct int3472_gpio_map int3472_gpio_map[] = {
 		.type_from = INT3472_GPIO_TYPE_POWERDOWN,
 		.type_to = INT3472_GPIO_TYPE_POWER_ENABLE,
 		.con_id = "vdd",
+		.enable_time_us = GPIO_REGULATOR_ENABLE_TIME,
 	},
 	{	/* ov7251 driver / DT-bindings expect "enable" as con_id for reset */
 		.hid = "INT347E",
@@ -157,7 +160,8 @@ static const struct int3472_gpio_map int3472_gpio_map[] = {
 };
 
 static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3472, u8 *type,
-					    const char **con_id, unsigned long *gpio_flags)
+					    const char **con_id, unsigned long *gpio_flags,
+					    unsigned int *enable_time_us)
 {
 	struct acpi_device *adev = int3472->sensor;
 	unsigned int i;
@@ -181,9 +185,12 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3
 		*gpio_flags = int3472_gpio_map[i].polarity_low ?
 			      GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
 		*con_id = int3472_gpio_map[i].con_id;
+		*enable_time_us = int3472_gpio_map[i].enable_time_us;
 		return;
 	}
 
+	*enable_time_us = GPIO_REGULATOR_ENABLE_TIME;
+
 	switch (*type) {
 	case INT3472_GPIO_TYPE_RESET:
 		*con_id = "reset";
@@ -208,6 +215,8 @@ static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3
 	case INT3472_GPIO_TYPE_HANDSHAKE:
 		*con_id = "dvdd";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
+		/* Setups using a handshake pin need 25 ms enable delay */
+		*enable_time_us = 25 * USEC_PER_MSEC;
 		break;
 	default:
 		*con_id = "unknown";
@@ -252,13 +261,15 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 					     void *data)
 {
 	struct int3472_discrete_device *int3472 = data;
+	const char *second_sensor = NULL;
 	struct acpi_resource_gpio *agpio;
+	unsigned int enable_time_us;
 	u8 active_value, pin, type;
+	unsigned long gpio_flags;
 	union acpi_object *obj;
 	struct gpio_desc *gpio;
 	const char *err_msg;
 	const char *con_id;
-	unsigned long gpio_flags;
 	int ret;
 
 	if (!acpi_gpio_get_io_resource(ares, &agpio))
@@ -281,7 +292,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_con_id_and_polarity(int3472, &type, &con_id, &gpio_flags);
+	int3472_get_con_id_and_polarity(int3472, &type, &con_id, &gpio_flags, &enable_time_us);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	/* Pin field is not really used under Windows and wraps around at 8 bits */
@@ -330,21 +341,13 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 			break;
 		case INT3472_GPIO_TYPE_POWER_ENABLE:
-			ret = skl_int3472_register_regulator(int3472, gpio,
-							     GPIO_REGULATOR_ENABLE_TIME,
-							     con_id,
-							     int3472->quirks.avdd_second_sensor);
-			if (ret)
-				err_msg = "Failed to map power-enable to sensor\n";
-
-			break;
+			second_sensor = int3472->quirks.avdd_second_sensor;
+			fallthrough;
 		case INT3472_GPIO_TYPE_HANDSHAKE:
-			/* Setups using a handshake pin need 25 ms enable delay */
-			ret = skl_int3472_register_regulator(int3472, gpio,
-							     25 * USEC_PER_MSEC,
-							     con_id, NULL);
+			ret = skl_int3472_register_regulator(int3472, gpio, enable_time_us,
+							     con_id, second_sensor);
 			if (ret)
-				err_msg = "Failed to map handshake to sensor\n";
+				err_msg = "Failed to register regulator\n";
 
 			break;
 		default: /* Never reached */
Signature · 1 line
2.49.0
author maintainer
#4 lore raw

PATCH v2 3/3 platform/x86: int3472: Increase ov08x40 handshake GPIO delay to 45 ms

In reply to Hans de Goede

On HP laptops with an ov08x40 sensor the 25 ms delay coming from Intel's out of tree drivers is not enough. Testing has confirmed that 45 ms does work.

Add a quirk to the int3472_gpio_map[] to increase the delay to 45 ms to fix probing of the ov08x40 sensor failing on these laptops.

Note this only impacts laptops which actually use an ov08x40 sensor with a handshake GPIO.

---
 drivers/platform/x86/intel/int3472/discrete.c | 7 +++++++
 1 file changed, 7 insertions(+)
drivers/platform/x86/intel/int3472/discrete.c +7 -0
index 74239ce38805..876bb75d4cf1 100644
@@ -157,6 +157,13 @@ static const struct int3472_gpio_map int3472_gpio_map[] = {
 		.type_to = INT3472_GPIO_TYPE_RESET,
 		.con_id = "enable"
 	},
+	{	/* ov08x40's handshake pin needs a 45 ms delay on some HP laptops */
+		.hid = "OVTI08F4",
+		.type_from = INT3472_GPIO_TYPE_HANDSHAKE,
+		.type_to = INT3472_GPIO_TYPE_HANDSHAKE,
+		.con_id = "dvdd",
+		.enable_time_us = 45 * USEC_PER_MSEC,
+	},
 };
 
 static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3472, u8 *type,
Signature · 1 line
2.49.0
Reviewed-by on the v2 series
#5 lore raw
In reply to Hans de Goede
Quoted 10 lines · Hans de Goede

Hi All,

Here is v2 of the patch-series to fix ov08x40 based cameras not working on several HP laptop models.

Changes in v2:
- Convert int3472_gpio_map to use C99 initializers
- s/enable_time/enable_time_us/
- Move enable_time above con_id for better struct packing

This version LGTM, FWIW,

(one nit-pick in one patch, but it is minor thing)

Signature · 2 lines
With Best Regards,
Andy Shevchenko
maintainer Reviewed-by on the v2 series
#6 lore raw
In reply to Hans de Goede

Hi Hans,

Quoted 9 lines · Hans de Goede

Hi All,

Here is v2 of the patch-series to fix ov08x40 based cameras not working on several HP laptop models.

Changes in v2:
- Convert int3472_gpio_map to use C99 initializers
- s/enable_time/enable_time_us/
- Move enable_time above con_id for better struct packing

Thanks for the set.

Signature · 1 line
Sakari Ailus
maintainer
#7 lore raw
In reply to Hans de Goede
Quoted 9 lines · Hans de Goede

Here is v2 of the patch-series to fix ov08x40 based cameras not working on several HP laptop models.

Changes in v2:
- Convert int3472_gpio_map to use C99 initializers
- s/enable_time/enable_time_us/
- Move enable_time above con_id for better struct packing

[...]

Thank you for your contribution, it has been applied to my local review-ilpo-next branch. Note it will show up in the public platform-drivers-x86/review-ilpo-next branch only once I've pushed my local branch there, which might take a while.

The list of commits applied:
[1/3] platform/x86: int3472: Convert int3472_gpio_map to use C99 initializers

      commit: b33b696f86f6d17c9083d69a13d7f32380d818d3
[2/3] platform/x86: int3472: Rework regulator enable-time handling
      commit: f11f8948a826afba66355302ba7e4b3e36333038
[3/3] platform/x86: int3472: Increase ov08x40 handshake GPIO delay to 45 ms
      commit: 30359c239ba8394c8e774151d26914db18dc4976

--
i.