Skip to contentSkip to conversation

Add initial support for the i.MX93 11x11

PATCH In review Antoine Picard 2 participants 4 messages Jul 28, 2025

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover Add initial support for the i.MX93 11x11

This series introduces initial support for the i.MX93 11x11 FRDM development board
in U-Boot. It includes:

- Device tree files tailored for the board.
- Board configuration header defining memory layout and basic hardware addresses.
- Defconfig and Kconfig entries to enable building for the new board.

A minimal working configuration has been tested on the hardware but without secure os.

Feedback and suggestions are welcome.

Antoine Picard (2):
arm: dts: imx93: add device tree for imx93-11x11-frdm board
board: freescale: add initial support for imx93_frdm board

 arch/arm/dts/Makefile                         |    1 +
 arch/arm/dts/imx93-11x11-frdm-u-boot.dtsi     |   53 +
 arch/arm/dts/imx93-11x11-frdm.dts             |  574 +++++
 arch/arm/mach-imx/imx9/Kconfig                |    6 +
 board/freescale/imx93_frdm/Kconfig            |   19 +
 board/freescale/imx93_frdm/MAINTAINERS        |    5 +
 board/freescale/imx93_frdm/Makefile           |   16 +
 board/freescale/imx93_frdm/imx93_frdm.c       |  350 +++
 .../freescale/imx93_frdm/lpddr4x_2gb_timing.c | 1996 ++++++++++++++++
 .../imx93_frdm/lpddr4x_ecc_2gb_timing.c       | 1997 +++++++++++++++++
 board/freescale/imx93_frdm/spl.c              |  201 ++
 configs/imx93_11x11_frdm_defconfig            |  158 ++
 include/configs/imx93_frdm.h                  |   27 +
 13 files changed, 5403 insertions(+)
 create mode 100644 arch/arm/dts/imx93-11x11-frdm-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx93-11x11-frdm.dts
 create mode 100644 board/freescale/imx93_frdm/Kconfig
 create mode 100644 board/freescale/imx93_frdm/MAINTAINERS
 create mode 100644 board/freescale/imx93_frdm/Makefile
 create mode 100644 board/freescale/imx93_frdm/imx93_frdm.c
 create mode 100644 board/freescale/imx93_frdm/lpddr4x_2gb_timing.c
 create mode 100644 board/freescale/imx93_frdm/lpddr4x_ecc_2gb_timing.c
 create mode 100644 board/freescale/imx93_frdm/spl.c
 create mode 100644 configs/imx93_11x11_frdm_defconfig
 create mode 100644 include/configs/imx93_frdm.h
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/2 arm: dts: imx93: add device tree for imx93-11x11-frdm board

From: Antoine Picard <[email protected]>

Add the following device tree files for the i.MX93 11x11 FRDM board:

- imx93-11x11-frdm.dts: base device tree for the board
- imx93-11x11-frdm-u-boot.dtsi: U-Boot specific overrides
- Update to arch/arm/dts/Makefile to build the new DTS

These files provide the initial DT support for U-Boot on the i.MX93 FRDM platform.

---
 arch/arm/dts/Makefile                     |   1 +
 arch/arm/dts/imx93-11x11-frdm-u-boot.dtsi |  53 ++
 arch/arm/dts/imx93-11x11-frdm.dts         | 574 ++++++++++++++++++++++
 3 files changed, 628 insertions(+)
 create mode 100644 arch/arm/dts/imx93-11x11-frdm-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx93-11x11-frdm.dts
arch/arm/dts/Makefile +1 -0
index 32b698a7f41..2792a101b51 100644
@@ -918,6 +918,7 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mq-librem5-r4.dtb
 
 dtb-$(CONFIG_ARCH_IMX9) += \
+	imx93-11x11-frdm.dtb \
 	imx93-var-som-symphony.dtb \
 	imx93-phyboard-segin.dtb
 
arch/arm/dts/imx93-11x11-frdm-u-boot.dtsi new file +53 -0

54 lines not on this page · raw message

arch/arm/dts/imx93-11x11-frdm.dts new file +574 -0

574 lines not on this page · raw message

Signature · 1 line
2.43.0
#2 lore raw

PATCH 2/2 board: freescale: add initial support for imx93_frdm board

In reply to Antoine Picard

From: Antoine Picard <[email protected]>

Add initial support for the NXP i.MX93 FRDM board, including:

- Board directory with initialization code
- DRAM timing files for LPDDR4X (2GB, ECC variants)
- SPL support
- Board-specific header and configuration
- i.MX9 Kconfig entry for board enablement
- defconfig for imx93_11x11_frdm

This enables basic SPL and U-Boot support for the i.MX93 FRDM development platform.

---
 arch/arm/mach-imx/imx9/Kconfig                |    6 +
 board/freescale/imx93_frdm/Kconfig            |   19 +
 board/freescale/imx93_frdm/MAINTAINERS        |    5 +
 board/freescale/imx93_frdm/Makefile           |   16 +
 board/freescale/imx93_frdm/imx93_frdm.c       |  350 +++
 .../freescale/imx93_frdm/lpddr4x_2gb_timing.c | 1996 ++++++++++++++++
 .../imx93_frdm/lpddr4x_ecc_2gb_timing.c       | 1997 +++++++++++++++++
 board/freescale/imx93_frdm/spl.c              |  201 ++
 configs/imx93_11x11_frdm_defconfig            |  158 ++
 include/configs/imx93_frdm.h                  |   27 +
 10 files changed, 4775 insertions(+)
 create mode 100644 board/freescale/imx93_frdm/Kconfig
 create mode 100644 board/freescale/imx93_frdm/MAINTAINERS
 create mode 100644 board/freescale/imx93_frdm/Makefile
 create mode 100644 board/freescale/imx93_frdm/imx93_frdm.c
 create mode 100644 board/freescale/imx93_frdm/lpddr4x_2gb_timing.c
 create mode 100644 board/freescale/imx93_frdm/lpddr4x_ecc_2gb_timing.c
 create mode 100644 board/freescale/imx93_frdm/spl.c
 create mode 100644 configs/imx93_11x11_frdm_defconfig
 create mode 100644 include/configs/imx93_frdm.h
arch/arm/mach-imx/imx9/Kconfig +6 -0
index 0fd82dc0811..5b6587486ad 100644
@@ -47,6 +47,11 @@ config TARGET_IMX91_11X11_EVK
 	imply BOOTSTD_FULL
 	imply BOOTSTD_BOOTCOMMAND
 
+config TARGET_IMX93_11X11_FRDM
+	bool "imx93_11x11_frdm"
+	select OF_BOARD_FIXUP
+	select IMX93
+
 config TARGET_IMX93_9X9_QSB
 	bool "imx93_qsb"
 	select OF_BOARD_FIXUP
@@ -91,6 +96,7 @@ source "board/freescale/imx93_qsb/Kconfig"
 source "board/phytec/phycore_imx93/Kconfig"
 source "board/variscite/imx93_var_som/Kconfig"
 source "board/freescale/imx95_evk/Kconfig"
+source "board/freescale/imx93_frdm/Kconfig"
 
 endif
 
board/freescale/imx93_frdm/Kconfig new file +19 -0
new file mode 100644
index 00000000000..639cb61047f
@@ -0,0 +1,19 @@
+if TARGET_IMX93_11X11_FRDM
+
+config SYS_BOARD
+	default "imx93_frdm"
+
+config SYS_VENDOR
+	default "freescale"
+
+config SYS_CONFIG_NAME
+	default "imx93_frdm"
+
+config IMX93_FRDM_LPDDR4X
+	bool "Using LPDDR4X Timing and PMIC voltage"
+	default y
+	select IMX9_LPDDR4X
+	help
+	  Select the LPDDR4X timing and 0.6V VDDQ
+
+endif
board/freescale/imx93_frdm/MAINTAINERS new file +5 -0
new file mode 100644
index 00000000000..6d443f15a1c
@@ -0,0 +1,5 @@
+i.MX93 FRDM BOARD
+S:	Maintained
+F:	board/freescale/imx93_frdm/
+F:	include/configs/imx93_frdm.h
+F:	configs/imx93_11x11_frdm_defconfig
board/freescale/imx93_frdm/Makefile new file +16 -0
new file mode 100644
index 00000000000..adf4a15336c
@@ -0,0 +1,16 @@
+#
+# Copyright 2024-2025 NXP
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += imx93_frdm.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+ifdef CONFIG_IMX9_DRAM_INLINE_ECC
+obj-$(CONFIG_IMX93_FRDM_LPDDR4X) += lpddr4x_ecc_2gb_timing.o
+else
+obj-$(CONFIG_IMX93_FRDM_LPDDR4X) += lpddr4x_2gb_timing.o
+endif
+endif
\ No newline at end of file
board/freescale/imx93_frdm/imx93_frdm.c new file +350 -0

350 lines not on this page · raw message

board/freescale/imx93_frdm/lpddr4x_2gb_timing.c new file +1996 -0

1,996 lines not on this page · raw message

board/freescale/imx93_frdm/lpddr4x_ecc_2gb_timing.c new file +1997 -0

595 lines not on this page · raw message

board/freescale/imx93_frdm/spl.c new file +201 -0

201 lines not on this page · raw message

configs/imx93_11x11_frdm_defconfig new file +158 -0

158 lines not on this page · raw message

include/configs/imx93_frdm.h new file +27 -0
new file mode 100644
index 00000000000..e1132c07c6b

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.43.0

Part of the diff is not shown here. View the raw message.

reviewer
#3 lore raw
In reply to Antoine Picard

Hi Antoine,

Quoted 10 lines · Antoine Picard

This series introduces initial support for the i.MX93 11x11 FRDM development board
in U-Boot. It includes:

- Device tree files tailored for the board.
- Board configuration header defining memory layout and basic hardware addresses.
- Defconfig and Kconfig entries to enable building for the new board.

Quoted 6 lines

A minimal working configuration has been tested on the hardware but without secure os.

Feedback and suggestions are welcome.

U-Boot support for this board has been recently added:

https://github.com/u-boot/u-boot/commit/b40c9b0c22773c23322423e6206f049d8f82c25d