FAILED: patch "[PATCH] arm64/entry: Mask DAIF in cpu_switch_to()," failed to apply to 6.1-stable tree
Subsystems (2)
[email protected]
maintainerThe patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x d42e6c20de6192f8e4ab4cf10be8c694ef27e8cb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025072817-deeply-galleria-d758@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From d42e6c20de6192f8e4ab4cf10be8c694ef27e8cb Mon Sep 17 00:00:00 2001
From: Ada Couprie Diaz <[email protected]>
Date: Fri, 18 Jul 2025 15:28:14 +0100
Subject: [PATCH] arm64/entry: Mask DAIF in cpu_switch_to(),
call_on_irq_stack()
cpu_switch_to() and call_on_irq_stack() manipulate SP to change to different stacks along with the Shadow Call Stack if it is enabled. Those two stack changes cannot be done atomically and both functions can be interrupted by SErrors or Debug Exceptions which, though unlikely, is very much broken : if interrupted, we can end up with mismatched stacks and Shadow Call Stack leading to clobbered stacks.
In cpu_switch_to(), it can happen when SP_EL0 points to the new task, but x18 stills points to the old task's SCS. When the interrupt handler tries to save the task's SCS pointer, it will save the old task SCS pointer (x18) into the new task struct (pointed to by SP_EL0), clobbering it.
In call_on_irq_stack(), it can happen when switching from the task stack to the IRQ stack and when switching back. In both cases, we can be interrupted when the SCS pointer points to the IRQ SCS, but SP points to the task stack. The nested interrupt handler pushes its return addresses on the IRQ SCS. It then detects that SP points to the task stack, calls call_on_irq_stack() and clobbers the task SCS pointer with the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS, or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and instead the GIC is responsible for filtering what interrupts the CPU should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU even in cpu_switch_to() and call_on_irq_stack(), possibly *very* frequently depending on the system configuration and workload, leading to unpredictable kernel panics.
Completely mask DAIF in cpu_switch_to() and restore it when returning. Do the same in call_on_irq_stack(), but restore and mask around the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF, as the existing one saves but only masks IF.
arch/arm64/include/asm/assembler.h +5 -0
@@ -41,6 +41,11 @@/* * Save/restore interrupts. */ + .macro save_and_disable_daif, flags + mrs \flags, daif + msr daifset, #0xf + .endm + .macro save_and_disable_irq, flags mrs \flags, daif msr daifset, #3
arch/arm64/kernel/entry.S +6 -0
@@ -825,6 +825,7 @@ SYM_CODE_END(__bp_harden_el1_vectors) * */ SYM_FUNC_START(cpu_switch_to) + save_and_disable_daif x11 mov x10, #THREAD_CPU_CONTEXT add x8, x0, x10 mov x9, sp
@@ -848,6 +849,7 @@ SYM_FUNC_START(cpu_switch_to) ptrauth_keys_install_kernel x1, x8, x9, x10 scs_save x0 scs_load_current + restore_irq x11 ret SYM_FUNC_END(cpu_switch_to) NOKPROBE(cpu_switch_to)
@@ -874,6 +876,7 @@ NOKPROBE(ret_from_fork) * Calls func(regs) using this CPU's irq stack and shadow irq stack. */ SYM_FUNC_START(call_on_irq_stack) + save_and_disable_daif x9 #ifdef CONFIG_SHADOW_CALL_STACK get_current_task x16 scs_save x16
@@ -888,8 +891,10 @@ SYM_FUNC_START(call_on_irq_stack) /* Move to the new stack and call the function there */ add sp, x16, #IRQ_STACK_SIZE + restore_irq x9 blr x1 + save_and_disable_daif x9 /* * Restore the SP from the FP, and restore the FP and LR from the frame * record.
@@ -897,6 +902,7 @@ SYM_FUNC_START(call_on_irq_stack) mov sp, x29 ldp x29, x30, [sp], #16 scs_load_current + restore_irq x9 ret SYM_FUNC_END(call_on_irq_stack) NOKPROBE(call_on_irq_stack)
Sasha Levin
maintainerPATCH 1/1 arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
From: Ada Couprie Diaz <[email protected]>
[ Upstream commit d42e6c20de6192f8e4ab4cf10be8c694ef27e8cb ]
cpu_switch_to() and call_on_irq_stack() manipulate SP to change to different stacks along with the Shadow Call Stack if it is enabled. Those two stack changes cannot be done atomically and both functions can be interrupted by SErrors or Debug Exceptions which, though unlikely, is very much broken : if interrupted, we can end up with mismatched stacks and Shadow Call Stack leading to clobbered stacks.
In cpu_switch_to(), it can happen when SP_EL0 points to the new task, but x18 stills points to the old task's SCS. When the interrupt handler tries to save the task's SCS pointer, it will save the old task SCS pointer (x18) into the new task struct (pointed to by SP_EL0), clobbering it.
In call_on_irq_stack(), it can happen when switching from the task stack to the IRQ stack and when switching back. In both cases, we can be interrupted when the SCS pointer points to the IRQ SCS, but SP points to the task stack. The nested interrupt handler pushes its return addresses on the IRQ SCS. It then detects that SP points to the task stack, calls call_on_irq_stack() and clobbers the task SCS pointer with the IRQ SCS pointer, which it will also use !
This leads to tasks returning to addresses on the wrong SCS, or even on the IRQ SCS, triggering kernel panics via CONFIG_VMAP_STACK or FPAC if enabled.
This is possible on a default config, but unlikely.
However, when enabling CONFIG_ARM64_PSEUDO_NMI, DAIF is unmasked and instead the GIC is responsible for filtering what interrupts the CPU should receive based on priority.
Given the goal of emulating NMIs, pseudo-NMIs can be received by the CPU even in cpu_switch_to() and call_on_irq_stack(), possibly *very* frequently depending on the system configuration and workload, leading to unpredictable kernel panics.
Completely mask DAIF in cpu_switch_to() and restore it when returning. Do the same in call_on_irq_stack(), but restore and mask around the branch.
Mask DAIF even if CONFIG_SHADOW_CALL_STACK is not enabled for consistency of behaviour between all configurations.
Introduce and use an assembly macro for saving and masking DAIF, as the existing one saves but only masks IF.
--- arch/arm64/kernel/entry.S | 6 ++++++ 1 file changed, 6 insertions(+)
arch/arm64/kernel/entry.S +6 -0
@@ -827,6 +827,7 @@ SYM_CODE_END(__bp_harden_el1_vectors) * */ SYM_FUNC_START(cpu_switch_to) + save_and_disable_daif x11 mov x10, #THREAD_CPU_CONTEXT add x8, x0, x10 mov x9, sp
@@ -850,6 +851,7 @@ SYM_FUNC_START(cpu_switch_to) ptrauth_keys_install_kernel x1, x8, x9, x10 scs_save x0 scs_load_current + restore_irq x11 ret SYM_FUNC_END(cpu_switch_to) NOKPROBE(cpu_switch_to)
@@ -876,6 +878,7 @@ NOKPROBE(ret_from_fork) * Calls func(regs) using this CPU's irq stack and shadow irq stack. */ SYM_FUNC_START(call_on_irq_stack) + save_and_disable_daif x9 #ifdef CONFIG_SHADOW_CALL_STACK get_current_task x16 scs_save x16
@@ -890,8 +893,10 @@ SYM_FUNC_START(call_on_irq_stack) /* Move to the new stack and call the function there */ add sp, x16, #IRQ_STACK_SIZE + restore_irq x9 blr x1 + save_and_disable_daif x9 /* * Restore the SP from the FP, and restore the FP and LR from the frame * record.
@@ -899,6 +904,7 @@ SYM_FUNC_START(call_on_irq_stack) mov sp, x29 ldp x29, x30, [sp], #16 scs_load_current + restore_irq x9 ret SYM_FUNC_END(call_on_irq_stack) NOKPROBE(call_on_irq_stack)
Signature · 1 line
2.39.5
Re: [PATCH 6.1.y] arm64/entry: Mask DAIF in cpu_switch_to(), call_on_irq_stack()
Hi Sasha,
Quoted 6 lines · Sasha Levin
From: Ada Couprie Diaz <[email protected]>
[ Upstream commit d42e6c20de6192f8e4ab4cf10be8c694ef27e8cb ][...][ removed duplicate save_and_disable_daif macro ]Signed-off-by Sasha Levin <[email protected]>
I had the same fix prepared locally, but you were much faster ! Thanks for taking care of it,
Ada