Skip to contentSkip to conversation

scsi: scsi_debug: make read-only arrays static const

PATCH Applied Colin Ian King 4 participants 7 messages Jul 29, 2025 – Aug 6, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 scsi: scsi_debug: make read-only arrays static const

Don't populate the read-only arrays on the stack at run time, instead make them static const. Also reduces overall size.

before:
text data bss dec hex filename
367439 89582 5952 462973 7107d drivers/scsi/scsi_debug.o

after:
text data bss dec hex filename
365847 90702 5952 462501 70ea5 drivers/scsi/scsi_debug.o

(gcc 14.2.0, x86-64)

---
 drivers/scsi/scsi_debug.c | 91 ++++++++++++++++++++++++---------------
 1 file changed, 57 insertions(+), 34 deletions(-)
drivers/scsi/scsi_debug.c +57 -34
index 0847767d4d43..353cb60e1abe 100644
@@ -2674,8 +2674,10 @@ static int resp_rsup_tmfs(struct scsi_cmnd *scp,
 
 static int resp_err_recov_pg(unsigned char *p, int pcontrol, int target)
 {	/* Read-Write Error Recovery page for mode_sense */
-	unsigned char err_recov_pg[] = {0x1, 0xa, 0xc0, 11, 240, 0, 0, 0,
-					5, 0, 0xff, 0xff};
+	static const unsigned char err_recov_pg[] = {
+		0x1, 0xa, 0xc0, 11, 240, 0, 0, 0,
+		5, 0, 0xff, 0xff
+	};
 
 	memcpy(p, err_recov_pg, sizeof(err_recov_pg));
 	if (1 == pcontrol)
@@ -2685,8 +2687,10 @@ static int resp_err_recov_pg(unsigned char *p, int pcontrol, int target)
 
 static int resp_disconnect_pg(unsigned char *p, int pcontrol, int target)
 { 	/* Disconnect-Reconnect page for mode_sense */
-	unsigned char disconnect_pg[] = {0x2, 0xe, 128, 128, 0, 10, 0, 0,
-					 0, 0, 0, 0, 0, 0, 0, 0};
+	static const unsigned char disconnect_pg[] = {
+		0x2, 0xe, 128, 128, 0, 10, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0
+	};
 
 	memcpy(p, disconnect_pg, sizeof(disconnect_pg));
 	if (1 == pcontrol)
@@ -2696,9 +2700,11 @@ static int resp_disconnect_pg(unsigned char *p, int pcontrol, int target)
 
 static int resp_format_pg(unsigned char *p, int pcontrol, int target)
 {       /* Format device page for mode_sense */
-	unsigned char format_pg[] = {0x3, 0x16, 0, 0, 0, 0, 0, 0,
-				     0, 0, 0, 0, 0, 0, 0, 0,
-				     0, 0, 0, 0, 0x40, 0, 0, 0};
+	static const unsigned char format_pg[] = {
+		0x3, 0x16, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0x40, 0, 0, 0
+	};
 
 	memcpy(p, format_pg, sizeof(format_pg));
 	put_unaligned_be16(sdebug_sectors_per, p + 10);
@@ -2716,10 +2722,14 @@ static unsigned char caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
 
 static int resp_caching_pg(unsigned char *p, int pcontrol, int target)
 { 	/* Caching page for mode_sense */
-	unsigned char ch_caching_pg[] = {/* 0x8, 18, */ 0x4, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
-	unsigned char d_caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
-		0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0,     0, 0, 0, 0};
+	static const unsigned char ch_caching_pg[] = {
+		/* 0x8, 18, */ 0x4, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0
+	};
+	static const unsigned char d_caching_pg[] = {
+		0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
+		0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0, 0, 0, 0, 0
+	};
 
 	if (SDEBUG_OPT_N_WCE & sdebug_opts)
 		caching_pg[2] &= ~0x4;	/* set WCE=0 (default WCE=1) */
@@ -2738,8 +2748,10 @@ static int resp_ctrl_m_pg(unsigned char *p, int pcontrol, int target)
 { 	/* Control mode page for mode_sense */
 	unsigned char ch_ctrl_m_pg[] = {/* 0xa, 10, */ 0x6, 0, 0, 0, 0, 0,
 					0, 0, 0, 0};
-	unsigned char d_ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
-				     0, 0, 0x2, 0x4b};
+	static const unsigned char d_ctrl_m_pg[] = {
+		0xa, 10, 2, 0, 0, 0, 0, 0,
+		0, 0, 0x2, 0x4b
+	};
 
 	if (sdebug_dsense)
 		ctrl_m_pg[2] |= 0x4;
@@ -2794,10 +2806,14 @@ static int resp_grouping_m_pg(unsigned char *p, int pcontrol, int target)
 
 static int resp_iec_m_pg(unsigned char *p, int pcontrol, int target)
 {	/* Informational Exceptions control mode page for mode_sense */
-	unsigned char ch_iec_m_pg[] = {/* 0x1c, 0xa, */ 0x4, 0xf, 0, 0, 0, 0,
-				       0, 0, 0x0, 0x0};
-	unsigned char d_iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
-				      0, 0, 0x0, 0x0};
+	static const unsigned char ch_iec_m_pg[] = {
+		/* 0x1c, 0xa, */ 0x4, 0xf, 0, 0, 0, 0,
+		0, 0, 0x0, 0x0
+	};
+	static const unsigned char d_iec_m_pg[] = {
+		0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
+		0, 0, 0x0, 0x0
+	};
 
 	memcpy(p, iec_m_pg, sizeof(iec_m_pg));
 	if (1 == pcontrol)
@@ -2809,8 +2825,9 @@ static int resp_iec_m_pg(unsigned char *p, int pcontrol, int target)
 
 static int resp_sas_sf_m_pg(unsigned char *p, int pcontrol, int target)
 {	/* SAS SSP mode page - short format for mode_sense */
-	unsigned char sas_sf_m_pg[] = {0x19, 0x6,
-		0x6, 0x0, 0x7, 0xd0, 0x0, 0x0};
+	static const unsigned char sas_sf_m_pg[] = {
+		0x19, 0x6, 0x6, 0x0, 0x7, 0xd0, 0x0, 0x0
+	};
 
 	memcpy(p, sas_sf_m_pg, sizeof(sas_sf_m_pg));
 	if (1 == pcontrol)
@@ -2854,9 +2871,10 @@ static int resp_sas_pcd_m_spg(unsigned char *p, int pcontrol, int target,
 
 static int resp_sas_sha_m_spg(unsigned char *p, int pcontrol)
 {	/* SAS SSP shared protocol specific port mode subpage */
-	unsigned char sas_sha_m_pg[] = {0x59, 0x2, 0, 0xc, 0, 0x6, 0x10, 0,
-		    0, 0, 0, 0, 0, 0, 0, 0,
-		};
+	static const unsigned char sas_sha_m_pg[] = {
+		0x59, 0x2, 0, 0xc, 0, 0x6, 0x10, 0,
+		0, 0, 0, 0, 0, 0, 0, 0,
+	};
 
 	memcpy(p, sas_sha_m_pg, sizeof(sas_sha_m_pg));
 	if (1 == pcontrol)
@@ -2923,8 +2941,10 @@ static int process_medium_part_m_pg(struct sdebug_dev_info *devip,
 static int resp_compression_m_pg(unsigned char *p, int pcontrol, int target,
 	unsigned char dce)
 {	/* Compression page for mode_sense (tape) */
-	unsigned char compression_pg[] = {0x0f, 14, 0x40, 0, 0, 0, 0, 0,
-		0, 0, 0, 0, 00, 00};
+	static const unsigned char compression_pg[] = {
+		0x0f, 14, 0x40, 0, 0, 0, 0, 0,
+		0, 0, 0, 0, 0, 0
+	};
 
 	memcpy(p, compression_pg, sizeof(compression_pg));
 	if (dce)
@@ -3282,9 +3302,10 @@ static int resp_mode_select(struct scsi_cmnd *scp,
 
 static int resp_temp_l_pg(unsigned char *arr)
 {
-	unsigned char temp_l_pg[] = {0x0, 0x0, 0x3, 0x2, 0x0, 38,
-				     0x0, 0x1, 0x3, 0x2, 0x0, 65,
-		};
+	static const unsigned char temp_l_pg[] = {
+		0x0, 0x0, 0x3, 0x2, 0x0, 38,
+		0x0, 0x1, 0x3, 0x2, 0x0, 65,
+	};
 
 	memcpy(arr, temp_l_pg, sizeof(temp_l_pg));
 	return sizeof(temp_l_pg);
@@ -3292,8 +3313,9 @@ static int resp_temp_l_pg(unsigned char *arr)
 
 static int resp_ie_l_pg(unsigned char *arr)
 {
-	unsigned char ie_l_pg[] = {0x0, 0x0, 0x3, 0x3, 0x0, 0x0, 38,
-		};
+	static const unsigned char ie_l_pg[] = {
+		0x0, 0x0, 0x3, 0x3, 0x0, 0x0, 38,
+	};
 
 	memcpy(arr, ie_l_pg, sizeof(ie_l_pg));
 	if (iec_m_pg[2] & 0x4) {	/* TEST bit set */
@@ -3305,11 +3327,12 @@ static int resp_ie_l_pg(unsigned char *arr)
 
 static int resp_env_rep_l_spg(unsigned char *arr)
 {
-	unsigned char env_rep_l_spg[] = {0x0, 0x0, 0x23, 0x8,
-					 0x0, 40, 72, 0xff, 45, 18, 0, 0,
-					 0x1, 0x0, 0x23, 0x8,
-					 0x0, 55, 72, 35, 55, 45, 0, 0,
-		};
+	static const unsigned char env_rep_l_spg[] = {
+		0x0, 0x0, 0x23, 0x8,
+		0x0, 40, 72, 0xff, 45, 18, 0, 0,
+		0x1, 0x0, 0x23, 0x8,
+		0x0, 55, 72, 35, 55, 45, 0, 0,
+	};
 
 	memcpy(arr, env_rep_l_spg, sizeof(env_rep_l_spg));
 	return sizeof(env_rep_l_spg);
Signature · 1 line
2.50.0
#2 lore raw
In reply to Colin Ian King

Le 29/07/2025 à 08:49, Colin Ian King a écrit :

Quoted 10 lines

Don't populate the read-only arrays on the stack at run time, instead make them static const. Also reduces overall size.

before:
text data bss dec hex filename
367439 89582 5952 462973 7107d drivers/scsi/scsi_debug.o

after:
text data bss dec hex filename
365847 90702 5952 462501 70ea5 drivers/scsi/scsi_debug.o

Hi,

out of curiosity, any idea why 'data' increase?

All my constification patches lead to data reduction.

Quoted 2 lines

(gcc 14.2.0, x86-64)

(same kind of behavior with 15.1.1)

CJ

#3 lore raw
Quoted 8 lines · Christophe JAILLET

Le 29/07/2025 à 08:49, Colin Ian King a écrit :

Quoted 7 lines

Don't populate the read-only arrays on the stack at run time, instead make them static const. Also reduces overall size.

before:
    text       data        bss        dec        hex    filename 367439      89582       5952     462973      7107d    drivers/scsi/ scsi_debug.o

Quoted 7 lines
Quoted 3 lines

after:
    text       data        bss        dec        hex    filename 365847      90702       5952     462501      70ea5    drivers/scsi/ scsi_debug.o

Hi,

out of curiosity, any idea why 'data' increase?

Because the arrays are being stored in the data section rather than on the stack.

Quoted 10 lines

All my constification patches lead to data reduction.

Quoted 2 lines

(gcc 14.2.0, x86-64)

(same kind of behavior with 15.1.1)

CJ

#4 lore raw

Le 29/07/2025 à 21:49, Colin King (gmail) a écrit :

Quoted 13 lines · Christophe JAILLET
Quoted 12 lines

Le 29/07/2025 à 08:49, Colin Ian King a écrit :

Quoted 10 lines

Don't populate the read-only arrays on the stack at run time, instead make them static const. Also reduces overall size.

before:
    text       data        bss        dec        hex    filename 367439      89582       5952     462973      7107d    drivers/scsi/ scsi_debug.o

after:
    text       data        bss        dec        hex    filename 365847      90702       5952     462501      70ea5    drivers/scsi/ scsi_debug.o

Quoted 5 lines
Quoted 3 lines

Hi,

out of curiosity, any idea why 'data' increase?

Because the arrays are being stored in the data section rather than on the stack.

Even when const is used?

See [1] for example, adding const moves the size from data to text. I would expect the same with your patch.

CJ

[1]: https://web.git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/?id=86b0fc4b2b45a78cbdc11873bc596d140eff390c

Quoted 12 lines
Quoted 11 lines

All my constification patches lead to data reduction.

Quoted 2 lines

(gcc 14.2.0, x86-64)

(same kind of behavior with 15.1.1)

CJ

#5 lore raw
In reply to Colin Ian King

Colin,

Quoted 2 lines

Don't populate the read-only arrays on the stack at run time, instead make them static const. Also reduces overall size.

Applied to 6.17/scsi-staging, thanks!

Signature · 1 line
Martin K. Petersen
#6 lore raw
In reply to Colin Ian King
Quoted 8 lines · Colin Ian King

Don't populate the read-only arrays on the stack at run time, instead make them static const. Also reduces overall size.

before:
text data bss dec hex filename
367439 89582 5952 462973 7107d drivers/scsi/scsi_debug.o

[...]

Applied to 6.17/scsi-queue, thanks!

[1/1] scsi: scsi_debug: make read-only arrays static const

      https://git.kernel.org/mkp/scsi/c/383cd6d879a1
Signature · 1 line
Martin K. Petersen	Oracle Linux Engineering