sunxi: a523: enable Ethernet
Subsystems (2)
cover sunxi: a523: enable Ethernet
The first of the two Ethernet controllers in the Allwinner A527/T527 SoCs is compatible to the IP used in the A64 SoC, which our MAC driver already supports. Since the recent DT update brought us the DT description of the network interface, enable the driver and thus Ethernet functionality on the two boards that work.
Patch 1/2 fixes the function name for the RGMII pins in the pinctrl driver, while patch 2/2 just enables building the sun8i-emac driver.
Please have a look and test!
Cheers,
Andre
Andre Przywara (2):
pinctrl: sunxi: a523: change Ethernet pin function name
sunxi: a527: radxa/avaota: enable Ethernet
configs/avaota-a1_defconfig | 2 ++ configs/radxa-cubie-a5e_defconfig | 2 ++ drivers/pinctrl/sunxi/pinctrl-sunxi.c | 2 +- 3 files changed, 5 insertions(+), 1 deletion(-)
Signature · 1 line
2.46.3
PATCH 1/2 pinctrl: sunxi: a523: change Ethernet pin function name
The name of the pin function was changed last minute in the DT, from emac0 to gmac0.
Adjust the name we use in the pinctrl driver accordingly.
--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pinctrl/sunxi/pinctrl-sunxi.c +1 -1
@@ -760,7 +760,7 @@ static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_pinctrl_desc = };static const struct sunxi_pinctrl_function sun55i_a523_pinctrl_functions[] = { - {"emac0" ,5 },/* PI0-PI16 */ + {"gmac0" ,5 },/* PI0-PI16 */ {"gpio_in" ,0 }, {"gpio_out" ,1 }, {"mmc0" ,2 },/* PF0-PF5 */
Signature · 1 line
2.46.3
Re: [PATCH 1/2] pinctrl: sunxi: a523: change Ethernet pin function name
Dne petek, 1. avgust 2025 ob 02:27:25 Srednjeevropski poletni čas je Andre Przywara napisal(a):
Quoted 5 lines
The name of the pin function was changed last minute in the DT, from emac0 to gmac0.
Adjust the name we use in the pinctrl driver accordingly.Signed-off-by Andre Przywara <[email protected]>
Best regards,
Jernej
Quoted 18 lines
--- drivers/pinctrl/sunxi/pinctrl-sunxi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/pinctrl/sunxi/pinctrl-sunxi.c +1
-1@@ -760,7 +760,7 @@ static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_pinctrl_desc = };static const struct sunxi_pinctrl_function sun55i_a523_pinctrl_functions[] = { - {"emac0" ,5 },/* PI0-PI16 */ + {"gmac0" ,5 },/* PI0-PI16 */ {"gpio_in" ,0 }, {"gpio_out" ,1 }, {"mmc0" ,2 },/* PF0-PF5 */
PATCH 2/2 sunxi: a527: radxa/avaota: enable Ethernet
In reply to Andre PrzywaraThe first of the two Ethernet controllers in the Allwinner A527/T527 is compatible to the MAC from the previous SoCs. Consequently the recent DT update brought use the MAC node, using the A64 compatible string as the fallback, which works out of the box.
Enable the sun8i-emac Ethernet driver in the defconfig for the Radxa and the Avaota boards, so that kernels and other data can be loaded via TFTP. Please note that only one of the Ethernet sockets will work, the second MAC is not compatible, and needs a new U-Boot driver. The X96QPro+ TV box unfortunately uses only this second EMAC, so Ethernet cannot be used there at the moment.
--- configs/avaota-a1_defconfig | 2 ++ configs/radxa-cubie-a5e_defconfig | 2 ++ 2 files changed, 4 insertions(+)
configs/avaota-a1_defconfig +2 -0
@@ -22,6 +22,8 @@ CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_PHY_REALTEK=y +CONFIG_SUN8I_EMAC=y CONFIG_REGULATOR_AXP=y CONFIG_AXP717_POWER=y CONFIG_AXP_I2C_ADDRESS=0x35
configs/radxa-cubie-a5e_defconfig +2 -0
@@ -22,6 +22,8 @@ CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_PHY_REALTEK=y +CONFIG_SUN8I_EMAC=y CONFIG_REGULATOR_AXP=y CONFIG_AXP717_POWER=y CONFIG_AXP_DCDC2_VOLT=920
Signature · 1 line
2.46.3
Re: [PATCH 2/2] sunxi: a527: radxa/avaota: enable Ethernet
Dne petek, 1. avgust 2025 ob 02:27:26 Srednjeevropski poletni čas je Andre Przywara napisal(a):
Quoted 5 lines
The first of the two Ethernet controllers in the Allwinner A527/T527 is compatible to the MAC from the previous SoCs. Consequently the recent DT update brought use the MAC node, using the A64 compatible string as the fallback, which works out of the box.
Quoted 8 lines
Enable the sun8i-emac Ethernet driver in the defconfig for the Radxa and the Avaota boards, so that kernels and other data can be loaded via TFTP. Please note that only one of the Ethernet sockets will work, the second MAC is not compatible, and needs a new U-Boot driver. The X96QPro+ TV box unfortunately uses only this second EMAC, so Ethernet cannot be used there at the moment.
Signed-off-by Andre Przywara <[email protected]>
Best regards,
Jernej
Quoted 32 lines
--- configs/avaota-a1_defconfig | 2 ++ configs/radxa-cubie-a5e_defconfig | 2 ++ 2 files changed, 4 insertions(+)configs/avaota-a1_defconfig +2
-0@@ -22,6 +22,8 @@ CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_PHY_REALTEK=y +CONFIG_SUN8I_EMAC=y CONFIG_REGULATOR_AXP=y CONFIG_AXP717_POWER=y CONFIG_AXP_I2C_ADDRESS=0x35configs/radxa-cubie-a5e_defconfig +2
-0@@ -22,6 +22,8 @@ CONFIG_SYS_I2C_MVTWSI=y CONFIG_SYS_I2C_SLAVE=0x7f CONFIG_SYS_I2C_SPEED=400000 CONFIG_SUPPORT_EMMC_BOOT=y +CONFIG_PHY_REALTEK=y +CONFIG_SUN8I_EMAC=y CONFIG_REGULATOR_AXP=y CONFIG_AXP717_POWER=y CONFIG_AXP_DCDC2_VOLT=920
Hi Andre,
Quoted 10 lines · Andre Przywara
The first of the two Ethernet controllers in the Allwinner A527/T527 SoCs is compatible to the IP used in the A64 SoC, which our MAC driver already supports. Since the recent DT update brought us the DT description of the network interface, enable the driver and thus Ethernet functionality on the two boards that work.
Patch 1/2 fixes the function name for the RGMII pins in the pinctrl driver, while patch 2/2 just enables building the sun8i-emac driver.Please have a look and test!
Thanks for pushing this
Quoted 15 lines
Cheers,
AndreAndre Przywara (2):
pinctrl: sunxi: a523: change Ethernet pin function name
sunxi: a527: radxa/avaota: enable Ethernetconfigs/avaota-a1_defconfig | 2 ++ configs/radxa-cubie-a5e_defconfig | 2 ++ drivers/pinctrl/sunxi/pinctrl-sunxi.c | 2 +- 3 files changed, 5 insertions(+), 1 deletion(-)Signature · 1 line
2.46.3
Signature · 1 line
Yixun Lan (dlan)