Skip to contentSkip to conversation

f2fs/015: test common mount options

PATCH In review Chao Yu 2 participants 6 messages Aug 4, 2025 – Aug 15, 2025

lore
Share & tools
lore

Chao Yu

author
#0 lore raw

PATCH v3 1/3 f2fs/015: test common mount options

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported common mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>
---
 common/rc          |   3 +
 tests/f2fs/015     | 121 +++++++++++++++++++++++++++++++
 tests/f2fs/015.out | 173 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 297 insertions(+)
 create mode 100755 tests/f2fs/015
 create mode 100644 tests/f2fs/015.out
common/rc +3 -0
index ff5df203..81587dad 100644
@@ -876,6 +876,9 @@ _test_mkfs()
     ext2|ext3|ext4)
 	$MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
 	;;
+    f2fs)
+	$MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* $TEST_DEV
+	;;
     xfs)
 	_test_options mkfs
 	$MKFS_PROG -t $FSTYP -- -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
tests/f2fs/015 new file +121 -0

121 lines not on this page · raw message

tests/f2fs/015.out new file +173 -0

173 lines not on this page · raw message

Signature · 1 line
2.49.0
author
#1 lore raw

PATCH v3 2/3 f2fs/016: test special mount options

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported special mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>
---
 tests/f2fs/016     | 50 ++++++++++++++++++++++++++++++++++++++++++++++
 tests/f2fs/016.out | 33 ++++++++++++++++++++++++++++++
 2 files changed, 83 insertions(+)
 create mode 100755 tests/f2fs/016
 create mode 100644 tests/f2fs/016.out
tests/f2fs/016 new file +50 -0
new file mode 100755
index 00000000..800f75fc
@@ -0,0 +1,50 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/016
+#
+# This testcase tries to check stability of mount result
+# w/ f2fs special mount options and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick mount
+_require_kernel_config CONFIG_F2FS_FS_COMPRESSION
+_require_kernel_config CONFIG_F2FS_FS_LZO
+_require_kernel_config CONFIG_F2FS_FS_LZORLE
+_require_kernel_config CONFIG_F2FS_FS_LZ4
+_require_kernel_config CONFIG_F2FS_FS_LZ4HC
+_require_kernel_config CONFIG_F2FS_FS_ZSTD
+
+options=(
+#	mount_option			mkfs_option
+	"inline_xattr_size=400"		"extra_attr,flexible_inline_xattr"\
+	"compress_algorithm=lzo"	"extra_attr,compression"	\
+	"compress_algorithm=lz4"	"extra_attr,compression"	\
+	"compress_algorithm=zstd"	"extra_attr,compression"	\
+	"compress_algorithm=lzo-rle"	"extra_attr,compression"	\
+	"compress_algorithm=lz4:3"	"extra_attr,compression"	\
+	"compress_algorithm=zstd:1"	"extra_attr,compression"	\
+	"compress_log_size=8"		"extra_attr,compression"	\
+	"compress_extension=so"		"extra_attr,compression"	\
+	"nocompress_extension=so"	"extra_attr,compression"	\
+	"nocompress_extension=*"	"extra_attr,compression"	\
+	"compress_extension=so,nocompress_extension=so"			\
+					"extra_attr,compression"	\
+	"compress_chksum"		"extra_attr,compression"	\
+	"compress_mode=fs"		"extra_attr,compression"	\
+	"compress_mode=user"		"extra_attr,compression"	\
+	"compress_cache"		"extra_attr,compression"	\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+	_scratch_mkfs "-O ${options[$((i+1))]}" >> $seqres.full || _fail "mkfs failed"
+	_try_scratch_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+	echo $?
+	_scratch_unmount >> $seqres.full 2>&1
+done
+
+status=0
+exit
tests/f2fs/016.out new file +33 -0
new file mode 100644
index 00000000..a8c96972
@@ -0,0 +1,33 @@
+QA output created by 016
+Option#0: inline_xattr_size=400 : extra_attr,flexible_inline_xattr
+0
+Option#2: compress_algorithm=lzo : extra_attr,compression
+0
+Option#4: compress_algorithm=lz4 : extra_attr,compression
+0
+Option#6: compress_algorithm=zstd : extra_attr,compression
+0
+Option#8: compress_algorithm=lzo-rle : extra_attr,compression
+0
+Option#10: compress_algorithm=lz4:3 : extra_attr,compression
+0
+Option#12: compress_algorithm=zstd:1 : extra_attr,compression
+0
+Option#14: compress_log_size=8 : extra_attr,compression
+0
+Option#16: compress_extension=so : extra_attr,compression
+0
+Option#18: nocompress_extension=so : extra_attr,compression
+0
+Option#20: nocompress_extension=* : extra_attr,compression
+32
+Option#22: compress_extension=so,nocompress_extension=so : extra_attr,compression
+32
+Option#24: compress_chksum : extra_attr,compression
+0
+Option#26: compress_mode=fs : extra_attr,compression
+0
+Option#28: compress_mode=user : extra_attr,compression
+0
+Option#30: compress_cache : extra_attr,compression
+0
Signature · 1 line
2.49.0
Reviewed-by on v3 2/3
#2 lore raw

Re: [PATCH v3 2/3] f2fs/016: test special mount options

Quoted 8 lines · Chao Yu

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported special mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>

---

This version is good to me,

Quoted 104 lines
 tests/f2fs/016     | 50 ++++++++++++++++++++++++++++++++++++++++++++++
 tests/f2fs/016.out | 33 ++++++++++++++++++++++++++++++
 2 files changed, 83 insertions(+)
 create mode 100755 tests/f2fs/016
 create mode 100644 tests/f2fs/016.out
tests/f2fs/016 new file +50 -0
new file mode 100755
index 00000000..800f75fc
@@ -0,0 +1,50 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/016
+#
+# This testcase tries to check stability of mount result
+# w/ f2fs special mount options and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick mount
+_require_kernel_config CONFIG_F2FS_FS_COMPRESSION
+_require_kernel_config CONFIG_F2FS_FS_LZO
+_require_kernel_config CONFIG_F2FS_FS_LZORLE
+_require_kernel_config CONFIG_F2FS_FS_LZ4
+_require_kernel_config CONFIG_F2FS_FS_LZ4HC
+_require_kernel_config CONFIG_F2FS_FS_ZSTD
+
+options=(
+#	mount_option			mkfs_option
+	"inline_xattr_size=400"		"extra_attr,flexible_inline_xattr"\
+	"compress_algorithm=lzo"	"extra_attr,compression"	\
+	"compress_algorithm=lz4"	"extra_attr,compression"	\
+	"compress_algorithm=zstd"	"extra_attr,compression"	\
+	"compress_algorithm=lzo-rle"	"extra_attr,compression"	\
+	"compress_algorithm=lz4:3"	"extra_attr,compression"	\
+	"compress_algorithm=zstd:1"	"extra_attr,compression"	\
+	"compress_log_size=8"		"extra_attr,compression"	\
+	"compress_extension=so"		"extra_attr,compression"	\
+	"nocompress_extension=so"	"extra_attr,compression"	\
+	"nocompress_extension=*"	"extra_attr,compression"	\
+	"compress_extension=so,nocompress_extension=so"			\
+					"extra_attr,compression"	\
+	"compress_chksum"		"extra_attr,compression"	\
+	"compress_mode=fs"		"extra_attr,compression"	\
+	"compress_mode=user"		"extra_attr,compression"	\
+	"compress_cache"		"extra_attr,compression"	\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+	_scratch_mkfs "-O ${options[$((i+1))]}" >> $seqres.full || _fail "mkfs failed"
+	_try_scratch_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+	echo $?
+	_scratch_unmount >> $seqres.full 2>&1
+done
+
+status=0
+exit
tests/f2fs/016.out new file +33 -0
new file mode 100644
index 00000000..a8c96972
@@ -0,0 +1,33 @@
+QA output created by 016
+Option#0: inline_xattr_size=400 : extra_attr,flexible_inline_xattr
+0
+Option#2: compress_algorithm=lzo : extra_attr,compression
+0
+Option#4: compress_algorithm=lz4 : extra_attr,compression
+0
+Option#6: compress_algorithm=zstd : extra_attr,compression
+0
+Option#8: compress_algorithm=lzo-rle : extra_attr,compression
+0
+Option#10: compress_algorithm=lz4:3 : extra_attr,compression
+0
+Option#12: compress_algorithm=zstd:1 : extra_attr,compression
+0
+Option#14: compress_log_size=8 : extra_attr,compression
+0
+Option#16: compress_extension=so : extra_attr,compression
+0
+Option#18: nocompress_extension=so : extra_attr,compression
+0
+Option#20: nocompress_extension=* : extra_attr,compression
+32
+Option#22: compress_extension=so,nocompress_extension=so : extra_attr,compression
+32
+Option#24: compress_chksum : extra_attr,compression
+0
+Option#26: compress_mode=fs : extra_attr,compression
+0
+Option#28: compress_mode=user : extra_attr,compression
+0
+Option#30: compress_cache : extra_attr,compression
+0
Signature · 1 line
2.49.0
author
#3 lore raw

PATCH v3 3/3 f2fs/017: test mount options for zoned device

In reply to Chao Yu

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for special mount options for zoned device and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>
---
 tests/f2fs/017     | 40 ++++++++++++++++++++++++++++++++++++++++
 tests/f2fs/017.out | 21 +++++++++++++++++++++
 2 files changed, 61 insertions(+)
 create mode 100755 tests/f2fs/017
 create mode 100644 tests/f2fs/017.out
tests/f2fs/017 new file +40 -0
new file mode 100755
index 00000000..cdf42fc8
@@ -0,0 +1,40 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/017
+#
+# This testcase tries to check stability of mount result
+# w/ mount options for zoned device and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick mount
+
+_require_zoned_device "$TEST_DEV"
+_test_unmount >> $seqres.full 2>&1
+
+options=(
+#	mount_option			mkfs_option
+	"background_gc=on"		"blkzone"		\
+	"background_gc=off"		"blkzone"		\
+	"background_gc=sync"		"blkzone"		\
+	"mode=adaptive"			"blkzone"		\
+	"mode=lfs"			"blkzone"		\
+	"mode=fragment:segment"		"blkzone"		\
+	"mode=fragment:block"		"blkzone"		\
+	"discard_unit=block"		"blkzone"		\
+	"discard_unit=segment"		"blkzone"		\
+	"discard_unit=section"		"blkzone"		\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+	_test_mkfs "-m" >> $seqres.full || _fail "mkfs failed"
+	_test_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+	echo $?
+	_test_unmount >> $seqres.full 2>&1
+done
+
+status=0
+exit
tests/f2fs/017.out new file +21 -0
new file mode 100644
index 00000000..c260e0b1
@@ -0,0 +1,21 @@
+QA output created by 017
+Option#0: background_gc=on : blkzone
+0
+Option#2: background_gc=off : blkzone
+32
+Option#4: background_gc=sync : blkzone
+0
+Option#6: mode=adaptive : blkzone
+32
+Option#8: mode=lfs : blkzone
+0
+Option#10: mode=fragment:segment : blkzone
+32
+Option#12: mode=fragment:block : blkzone
+32
+Option#14: discard_unit=block : blkzone
+0
+Option#16: discard_unit=segment : blkzone
+0
+Option#18: discard_unit=section : blkzone
+0
Signature · 1 line
2.49.0
Reviewed-by on v3 3/3
#4 lore raw

Re: [PATCH v3 3/3] f2fs/017: test mount options for zoned device

Quoted 8 lines · Chao Yu

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for special mount options for zoned device and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>

---

This version is good to me,

Quoted 82 lines
 tests/f2fs/017     | 40 ++++++++++++++++++++++++++++++++++++++++
 tests/f2fs/017.out | 21 +++++++++++++++++++++
 2 files changed, 61 insertions(+)
 create mode 100755 tests/f2fs/017
 create mode 100644 tests/f2fs/017.out
tests/f2fs/017 new file +40 -0
new file mode 100755
index 00000000..cdf42fc8
@@ -0,0 +1,40 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/017
+#
+# This testcase tries to check stability of mount result
+# w/ mount options for zoned device and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick mount
+
+_require_zoned_device "$TEST_DEV"
+_test_unmount >> $seqres.full 2>&1
+
+options=(
+#	mount_option			mkfs_option
+	"background_gc=on"		"blkzone"		\
+	"background_gc=off"		"blkzone"		\
+	"background_gc=sync"		"blkzone"		\
+	"mode=adaptive"			"blkzone"		\
+	"mode=lfs"			"blkzone"		\
+	"mode=fragment:segment"		"blkzone"		\
+	"mode=fragment:block"		"blkzone"		\
+	"discard_unit=block"		"blkzone"		\
+	"discard_unit=segment"		"blkzone"		\
+	"discard_unit=section"		"blkzone"		\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+	_test_mkfs "-m" >> $seqres.full || _fail "mkfs failed"
+	_test_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+	echo $?
+	_test_unmount >> $seqres.full 2>&1
+done
+
+status=0
+exit
tests/f2fs/017.out new file +21 -0
new file mode 100644
index 00000000..c260e0b1
@@ -0,0 +1,21 @@
+QA output created by 017
+Option#0: background_gc=on : blkzone
+0
+Option#2: background_gc=off : blkzone
+32
+Option#4: background_gc=sync : blkzone
+0
+Option#6: mode=adaptive : blkzone
+32
+Option#8: mode=lfs : blkzone
+0
+Option#10: mode=fragment:segment : blkzone
+32
+Option#12: mode=fragment:block : blkzone
+32
+Option#14: discard_unit=block : blkzone
+0
+Option#16: discard_unit=segment : blkzone
+0
+Option#18: discard_unit=section : blkzone
+0
Signature · 1 line
2.49.0
Reviewed-by on v3 1/3
#5 lore raw
In reply to Chao Yu
Quoted 8 lines · Chao Yu

As f2fs changes to use new mount APIs, let's add a new testcase to check mount result for all f2fs supported common mount options and their combinations, in order to detect any inconsistency during mount.

Cc Jaegeuk Kim <[email protected]>

---

I forgot this patchset. This version is good to me,

Quoted 330 lines
 common/rc          |   3 +
 tests/f2fs/015     | 121 +++++++++++++++++++++++++++++++
 tests/f2fs/015.out | 173 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 297 insertions(+)
 create mode 100755 tests/f2fs/015
 create mode 100644 tests/f2fs/015.out
common/rc +3 -0
index ff5df203..81587dad 100644
@@ -876,6 +876,9 @@ _test_mkfs()
     ext2|ext3|ext4)
 	$MKFS_PROG -t $FSTYP -- -F $MKFS_OPTIONS $* $TEST_DEV
 	;;
+    f2fs)
+	$MKFS_PROG -t $FSTYP -- -f $MKFS_OPTIONS $* $TEST_DEV
+	;;
     xfs)
 	_test_options mkfs
 	$MKFS_PROG -t $FSTYP -- -f $TEST_OPTIONS $MKFS_OPTIONS $* $TEST_DEV
tests/f2fs/015 new file +121 -0
new file mode 100755
index 00000000..73ac3d82
@@ -0,0 +1,121 @@
+#! /bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2025 Chao Yu.  All Rights Reserved.
+#
+# FS QA Test No. f2fs/015
+#
+# This testcase tries to check stability of mount result
+# w/ common mount option and their combination.
+#
+. ./common/preamble
+_begin_fstest auto quick mount
+_require_kernel_config CONFIG_F2FS_FS_XATTR
+_require_kernel_config CONFIG_F2FS_FS_POSIX_ACL
+_require_kernel_config CONFIG_F2FS_FAULT_INJECTION
+
+options=(
+#	mount_option			mkfs_option
+	"background_gc=on"		""			\
+	"background_gc=off"		""			\
+	"background_gc=sync"		""			\
+	"disable_roll_forward"		""			\
+	"norecovery"			""			\
+	"discard"			""			\
+	"nodiscard"			""			\
+	"no_heap"			""			\
+	"heap"				""			\
+	"user_xattr"			""			\
+	"nouser_xattr"			""			\
+	"acl"				""			\
+	"noacl"				""			\
+	"active_logs=2"			""			\
+	"active_logs=4"			""			\
+	"active_logs=6"			""			\
+	"disable_ext_identify"		""			\
+	"inline_xattr"			""			\
+	"noinline_xattr"		""			\
+	"inline_xattr_size=400"		""			\
+	"inline_data"			""			\
+	"noinline_dentry"		""			\
+	"inline_dentry"			""			\
+	"noinline_dentry"		""			\
+	"flush_merge"			""			\
+	"noflush_merge"			""			\
+	"barrier"			""			\
+	"nobarrier"			""			\
+	"fastboot"			""			\
+	"extent_cache"			""			\
+	"noextent_cache"		""			\
+	"data_flush"			""			\
+	"reserve_root=32768"		""			\
+	"resuid=1000"			""			\
+	"resgid=1000"			""			\
+	"fault_injection=100"		""			\
+	"fault_type=4095"		""			\
+	"mode=adaptive"			""			\
+	"mode=lfs"			""			\
+	"mode=fragment:segment"		""			\
+	"mode=fragment:block"		""			\
+	"usrquota"			""			\
+	"grpquota"			""			\
+	"prjquota"			""			\
+	"usrjquota=ausrquota"		""			\
+	"grpjquota=agrpquota"		""			\
+	"prjjquota=aprjquota"		""			\
+	"jqfmt=vfsold"			""			\
+	"jqfmt=vfsv0"			""			\
+	"jqfmt=vfsv1"			""			\
+	"usrjquota="			""			\
+	"grpjquota="			""			\
+	"prjjquota="			""			\
+	"quota"				""			\
+	"noquota"			""			\
+	"alloc_mode=reuse"		""			\
+	"alloc_mode=default"		""			\
+	"fsync_mode=posix"		""			\
+	"fsync_mode=strict"		""			\
+	"fsync_mode=nobarrier"		""			\
+	"test_dummy_encryption"		""			\
+	"test_dummy_encryption=v1"	""			\
+	"test_dummy_encryption=v2"	""			\
+	"checkpoint=enable"		""			\
+	"checkpoint=disable"		""			\
+	"checkpoint=disable:32768"	""			\
+	"checkpoint=disable:50%"	""			\
+	"checkpoint_merge"		""			\
+	"nocheckpoint_merge"		""			\
+	"compress_algorithm=lzo"	""			\
+	"inlinecrypt"			""			\
+	"atgc"				""			\
+	"discard_unit=block"		""			\
+	"discard_unit=segment"		""			\
+	"discard_unit=section"		""			\
+	"memory=normal"			""			\
+	"memory=low"			""			\
+	"age_extent_cache"		""			\
+	"errors=panic"			""			\
+	"errors=continue"		""			\
+	"errors=remount-ro"		""			\
+	"nat_bits"			""			\
+	"atgc,mode=lfs"			""			\
+	"ro,flush_merge"		""			\
+	"rw"				"ro"			\
+	"norecovery,ro"			""			\
+)
+
+for ((i=0;i<${#options[@]};i=i+2))
+do
+	echo "Option#$i: ${options[$i]} : ${options[$((i+1))]}"
+
+	if [ "${options[$((i+1))]}" ]; then
+		_scratch_mkfs "-O ${options[$((i+1))]}" >> $seqres.full || _fail "mkfs failed"
+	else
+		_scratch_mkfs >> $seqres.full || _fail "mkfs failed"
+	fi
+	_try_scratch_mount "-o ${options[$i]}" >> $seqres.full 2>&1
+	echo $?
+	_scratch_unmount >> $seqres.full 2>&1
+done
+
+status=0
+exit
tests/f2fs/015.out new file +173 -0
new file mode 100644
index 00000000..8d6712f0
@@ -0,0 +1,173 @@
+QA output created by 015
+Option#0: background_gc=on : 
+0
+Option#2: background_gc=off : 
+0
+Option#4: background_gc=sync : 
+0
+Option#6: disable_roll_forward : 
+0
+Option#8: norecovery : 
+32
+Option#10: discard : 
+0
+Option#12: nodiscard : 
+0
+Option#14: no_heap : 
+0
+Option#16: heap : 
+0
+Option#18: user_xattr : 
+0
+Option#20: nouser_xattr : 
+0
+Option#22: acl : 
+0
+Option#24: noacl : 
+0
+Option#26: active_logs=2 : 
+0
+Option#28: active_logs=4 : 
+0
+Option#30: active_logs=6 : 
+0
+Option#32: disable_ext_identify : 
+0
+Option#34: inline_xattr : 
+0
+Option#36: noinline_xattr : 
+0
+Option#38: inline_xattr_size=400 : 
+0
+Option#40: inline_data : 
+0
+Option#42: noinline_dentry : 
+0
+Option#44: inline_dentry : 
+0
+Option#46: noinline_dentry : 
+0
+Option#48: flush_merge : 
+0
+Option#50: noflush_merge : 
+0
+Option#52: barrier : 
+0
+Option#54: nobarrier : 
+0
+Option#56: fastboot : 
+0
+Option#58: extent_cache : 
+0
+Option#60: noextent_cache : 
+0
+Option#62: data_flush : 
+0
+Option#64: reserve_root=32768 : 
+0
+Option#66: resuid=1000 : 
+0
+Option#68: resgid=1000 : 
+0
+Option#70: fault_injection=100 : 
+0
+Option#72: fault_type=4095 : 
+0
+Option#74: mode=adaptive : 
+0
+Option#76: mode=lfs : 
+0
+Option#78: mode=fragment:segment : 
+0
+Option#80: mode=fragment:block : 
+0
+Option#82: usrquota : 
+0
+Option#84: grpquota : 
+0
+Option#86: prjquota : 
+32
+Option#88: usrjquota=ausrquota : 
+32
+Option#90: grpjquota=agrpquota : 
+32
+Option#92: prjjquota=aprjquota : 
+32
+Option#94: jqfmt=vfsold : 
+0
+Option#96: jqfmt=vfsv0 : 
+0
+Option#98: jqfmt=vfsv1 : 
+0
+Option#100: usrjquota= : 
+0
+Option#102: grpjquota= : 
+0
+Option#104: prjjquota= : 
+0
+Option#106: quota : 
+0
+Option#108: noquota : 
+0
+Option#110: alloc_mode=reuse : 
+0
+Option#112: alloc_mode=default : 
+0
+Option#114: fsync_mode=posix : 
+0
+Option#116: fsync_mode=strict : 
+0
+Option#118: fsync_mode=nobarrier : 
+0
+Option#120: test_dummy_encryption : 
+0
+Option#122: test_dummy_encryption=v1 : 
+0
+Option#124: test_dummy_encryption=v2 : 
+0
+Option#126: checkpoint=enable : 
+0
+Option#128: checkpoint=disable : 
+0
+Option#130: checkpoint=disable:32768 : 
+0
+Option#132: checkpoint=disable:50% : 
+0
+Option#134: checkpoint_merge : 
+0
+Option#136: nocheckpoint_merge : 
+0
+Option#138: compress_algorithm=lzo : 
+0
+Option#140: inlinecrypt : 
+0
+Option#142: atgc : 
+0
+Option#144: discard_unit=block : 
+0
+Option#146: discard_unit=segment : 
+0
+Option#148: discard_unit=section : 
+0
+Option#150: memory=normal : 
+0
+Option#152: memory=low : 
+0
+Option#154: age_extent_cache : 
+0
+Option#156: errors=panic : 
+0
+Option#158: errors=continue : 
+0
+Option#160: errors=remount-ro : 
+0
+Option#162: nat_bits : 
+0
+Option#164: atgc,mode=lfs : 
+32
+Option#166: ro,flush_merge : 
+32
+Option#168: rw : ro
+0
+Option#170: norecovery,ro : 
+0
Signature · 1 line
2.49.0