ram: Tighten some ram driver dependencies
Subsystems (2)
PATCH 1/1 ram: Tighten some ram driver dependencies
A few ram drivers cannot build without access to some platform specific header files. Express those requirements in Kconfig as well.
--- drivers/ram/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/ram/Kconfig +3 -3
@@ -39,7 +39,7 @@ config VPL_RAM config STM32_SDRAM bool "Enable STM32 SDRAM support" - depends on RAM + depends on RAM && ARCH_STM32 help STM32F7 family devices support flexible memory controller(FMC) to support external memories like sdram, psram & nand.
@@ -47,7 +47,7 @@ config STM32_SDRAM config MPC83XX_SDRAM bool "Enable MPC83XX SDRAM support" - depends on RAM + depends on RAM && MPC83xx help Enable support for the internal DDR Memory Controller of the MPC83xx family of SoCs. Both static configurations, as well as configuring
@@ -67,7 +67,7 @@ config K3_AM654_DDRSS config K3_DDRSS bool "Enable K3 DDRSS support" - depends on RAM + depends on RAM && ARCH_K3 choice depends on K3_DDRSS
Signature · 1 line
2.43.0
PATCH 1/1 remoteproc: Tighten some remoteproc driver dependencies
The TI IPU remoteproc driver cannot build without access to some platform specific header files. Express that requirements in Kconfig as well.
--- drivers/remoteproc/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/remoteproc/Kconfig +1 -0
@@ -125,6 +125,7 @@ config REMOTEPROC_TI_PRU config REMOTEPROC_TI_IPU bool "Support for TI's K3 based IPU remoteproc driver" select REMOTEPROC + depends on ARCH_K3 depends on DM depends on SPL_DRIVERS_MISC depends on SPL_FS_LOADER
Signature · 1 line
2.43.0
Re: [PATCH] remoteproc: Tighten some remoteproc driver dependencies
Quoted 5 lines · Tom Rini
The TI IPU remoteproc driver cannot build without access to some platform specific header files. Express that requirements in
Kconfigas well.
Applied to u-boot/next, thanks!
[1/1] remoteproc: Tighten some remoteproc driver dependencies
commit: 548ae9d1a537464254afac63f802179a24c645d6
Signature · 1 line
Tom
PATCH 1/1 reset: Tighten some reset driver dependencies
In reply to Tom RiniA few reset drivers cannot build without access to some platform specific header files. Express those requirements in Kconfig as well.
--- drivers/reset/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/reset/Kconfig +5 -5
@@ -74,8 +74,8 @@ config RESET_UNIPHIER config RESET_AST2500 bool "Reset controller driver for AST2500 SoCs" - depends on DM_RESET - default y if ASPEED_AST2500 + depends on DM_RESET && ASPEED_AST2500 + default y help Support for reset controller on AST2500 SoC. Say Y if you want to control reset signals of different peripherals
@@ -83,8 +83,8 @@ config RESET_AST2500 config RESET_AST2600 bool "Reset controller driver for AST2600 SoCs" - depends on DM_RESET - default y if ASPEED_AST2600 + depends on DM_RESET && ASPEED_AST2600 + default y help Support for reset controller on AST2600 SoC. Say Y if you want to control reset signals of different peripherals
@@ -223,7 +223,7 @@ config RESET_ZYNQMP config RESET_DRA7 bool "Support for TI's DRA7 Reset driver" - depends on DM_RESET + depends on DM_RESET && ARCH_OMAP2PLUS help Support for TI DRA7-RESET subsystem. Basic Assert/Deassert is supported.
Signature · 1 line
2.43.0
Re: [PATCH] reset: Tighten some reset driver dependencies
Quoted 4 lines · Tom Rini
A few reset drivers cannot build without access to some platform specific header files. Express those requirements in
Kconfigas well.
Applied to u-boot/next, thanks!
[1/1] reset: Tighten some reset driver dependencies
commit: 0ae7725e874a65d86ccdc964048940a490185972
Signature · 1 line
Tom