Skip to contentSkip to conversation

Add function name to underlying return probes

PATCH In review [email protected] 2 participants 2 messages Aug 5, 2025 – Aug 6, 2025

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Add function name to underlying return probes

From: Eugene Loh <[email protected]>

In commit 35a4f05c2
("Add support for pid function "-" with absolute offset"), function names were removed from underlying probe descriptions. That was so that pid absolute offset probes (pid$pid:a.out:-:$absoff), with function "-", could sit on the same underlying probes as pid$pid:$mod:$fun:entry, pid$pid:$mod:$fun:$off, and USDT probes.

While that made sense for those probes, it did not make sense for pid return probes: their underlying probes, all with probe name "return", are no longer distinguishable. Further, there was no need for any such change, since no other probes will have the same underlying return probe.

Name underlying return probes with function name.

---
 libdtrace/dt_prov_uprobe.c           |  7 +++++--
 test/unittest/pid/tst.multi-return.d | 21 +++++++++++++++++++++
 test/unittest/pid/tst.multi-return.r |  7 +++++++
 3 files changed, 33 insertions(+), 2 deletions(-)
 create mode 100644 test/unittest/pid/tst.multi-return.d
 create mode 100644 test/unittest/pid/tst.multi-return.r
libdtrace/dt_prov_uprobe.c +5 -2
index a633b6fe7..3661f09d9 100644
@@ -906,6 +906,7 @@ static dt_probe_t *create_underlying(dtrace_hdl_t *dtp,
 				     const pid_probespec_t *psp)
 {
 	char			mod[DTRACE_MODNAMELEN];
+	char			fun[DTRACE_FUNCNAMELEN];
 	char			prb[DTRACE_NAMELEN];
 	dtrace_probedesc_t	pd;
 	dt_probe_t		*uprp;
@@ -923,12 +924,14 @@ static dt_probe_t *create_underlying(dtrace_hdl_t *dtp,
 	 *
 	 * The probe description for return probes is:
 	 *
-	 *	uprobe:<dev>_<inode>::return
+	 *	uprobe:<dev>_<inode>:<func>:return
 	 */
 	snprintf(mod, sizeof(mod), "%lx_%lx", psp->pps_dev, psp->pps_inum);
 
+	fun[0] = '\0';
 	switch (psp->pps_type) {
 	case DTPPT_RETURN:
+		strcpy(fun, psp->pps_fun);
 		strcpy(prb, "return");
 		break;
 	case DTPPT_IS_ENABLED:
@@ -946,7 +949,7 @@ static dt_probe_t *create_underlying(dtrace_hdl_t *dtp,
 	pd.id = DTRACE_IDNONE;
 	pd.prv = prvname;
 	pd.mod = mod;
-	pd.fun = "";
+	pd.fun = fun;
 	pd.prb = prb;
 
 	dt_dprintf("Providing underlying probe %s:%s:%s:%s @ %lx\n", psp->pps_prv,
test/unittest/pid/tst.multi-return.d new file +21 -0
new file mode 100644
index 000000000..0f81f343c
@@ -0,0 +1,21 @@
+/*
+ * Oracle Linux DTrace.
+ * Copyright (c) 2025, Oracle and/or its affiliates. All rights reserved.
+ * Licensed under the Universal Permissive License v 1.0 as shown at
+ * http://oss.oracle.com/licenses/upl.
+ */
+
+/* @@trigger: profile-tst-ufuncsort */
+/* @@nosort */
+
+#pragma D option quiet
+
+pid$target:a.out::return
+{
+	@[probefunc] = count();
+}
+
+tick-2s
+{
+	exit(0);
+}
test/unittest/pid/tst.multi-return.r new file +7 -0
new file mode 100644
index 000000000..bf885b28c
@@ -0,0 +1,7 @@
+
+  f_b                                                               1
+  f_e                                                               1
+  f_d                                                               2
+  f_a                                                               3
+  f_c                                                               4
+  fN                                                               11
Signature · 1 line
2.43.5
Reviewed-by on v1 1/1
#1 lore raw
Quoted 9 lines · eugene.loh--- via DTrace-devel

From: Eugene Loh <[email protected]>

In commit 35a4f05c2
("Add support for pid function "-" with absolute offset"), function names were removed from underlying probe descriptions. That was so that pid absolute offset probes (pid$pid:a.out:-:$absoff), with function "-", could sit on the same underlying probes as pid$pid:$mod:$fun:entry, pid$pid:$mod:$fun:$off, and USDT probes.

Quoted 8 lines

While that made sense for those probes, it did not make sense for pid return probes: their underlying probes, all with probe name "return", are no longer distinguishable. Further, there was no need for any such change, since no other probes will have the same underlying return probe.

Name underlying return probes with function name.

Quoted 93 lines
---
 libdtrace/dt_prov_uprobe.c           |  7 +++++--
 test/unittest/pid/tst.multi-return.d | 21 +++++++++++++++++++++
 test/unittest/pid/tst.multi-return.r |  7 +++++++
 3 files changed, 33 insertions(+), 2 deletions(-)
 create mode 100644 test/unittest/pid/tst.multi-return.d
 create mode 100644 test/unittest/pid/tst.multi-return.r
libdtrace/dt_prov_uprobe.c +5 -2
index a633b6fe7..3661f09d9 100644
@@ -906,6 +906,7 @@ static dt_probe_t *create_underlying(dtrace_hdl_t *dtp,
 				     const pid_probespec_t *psp)
 {
 	char			mod[DTRACE_MODNAMELEN];
+	char			fun[DTRACE_FUNCNAMELEN];
 	char			prb[DTRACE_NAMELEN];
 	dtrace_probedesc_t	pd;
 	dt_probe_t		*uprp;
@@ -923,12 +924,14 @@ static dt_probe_t *create_underlying(dtrace_hdl_t *dtp,
 	 *
 	 * The probe description for return probes is:
 	 *
-	 *	uprobe:<dev>_<inode>::return
+	 *	uprobe:<dev>_<inode>:<func>:return
 	 */
 	snprintf(mod, sizeof(mod), "%lx_%lx", psp->pps_dev, psp->pps_inum);
 
+	fun[0] = '\0';
 	switch (psp->pps_type) {
 	case DTPPT_RETURN:
+		strcpy(fun, psp->pps_fun);
 		strcpy(prb, "return");
 		break;
 	case DTPPT_IS_ENABLED:
@@ -946,7 +949,7 @@ static dt_probe_t *create_underlying(dtrace_hdl_t *dtp,
 	pd.id = DTRACE_IDNONE;
 	pd.prv = prvname;
 	pd.mod = mod;
-	pd.fun = "";
+	pd.fun = fun;
 	pd.prb = prb;
 
 	dt_dprintf("Providing underlying probe %s:%s:%s:%s @ %lx\n", psp->pps_prv,
test/unittest/pid/tst.multi-return.d new file +21 -0
new file mode 100644
index 000000000..0f81f343c
@@ -0,0 +1,21 @@
+/*
+ * Oracle Linux DTrace.
+ * Copyright (c) 2025, Oracle and/or its affiliates. All rights reserved.
+ * Licensed under the Universal Permissive License v 1.0 as shown at
+ * http://oss.oracle.com/licenses/upl.
+ */
+
+/* @@trigger: profile-tst-ufuncsort */
+/* @@nosort */
+
+#pragma D option quiet
+
+pid$target:a.out::return
+{
+	@[probefunc] = count();
+}
+
+tick-2s
+{
+	exit(0);
+}
test/unittest/pid/tst.multi-return.r new file +7 -0
new file mode 100644
index 000000000..bf885b28c
@@ -0,0 +1,7 @@
+
+  f_b                                                               1
+  f_e                                                               1
+  f_d                                                               2
+  f_a                                                               3
+  f_c                                                               4
+  fN                                                               11
Signature · 7 lines
2.43.5


_______________________________________________
DTrace-devel mailing list
[email protected]
https://oss.oracle.com/mailman/listinfo/dtrace-devel