dt-bindings: arm: marvell: Convert marvell,kirkwood boards to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: arm: marvell: Convert marvell,kirkwood boards to DT schema
Convert Marvell Kirkwood based boards to DT schema format.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../bindings/arm/marvell/kirkwood.txt | 27 -- .../bindings/arm/marvell/marvell,kirkwood.txt | 105 ------- .../arm/marvell/marvell,kirkwood.yaml | 266 ++++++++++++++++++ 3 files changed, 266 insertions(+), 132 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/marvell/kirkwood.txt delete mode 100644 Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt create mode 100644 Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.yaml
Documentation/devicetree/bindings/arm/marvell/kirkwood.txt deleted +0 -27
@@ -1,27 +0,0 @@ -Marvell Kirkwood Platforms Device Tree Bindings ------------------------------------------------ - -Boards with a SoC of the Marvell Kirkwood -shall have the following property: - -Required root node property: - -compatible: must contain "marvell,kirkwood"; - -In order to support the kirkwood cpufreq driver, there must be a node -cpus/cpu@0 with three clocks, "cpu_clk", "ddrclk" and "powersave", -where the "powersave" clock is a gating clock used to switch the CPU -between the "cpu_clk" and the "ddrclk". - -Example: - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - device_type = "cpu"; - compatible = "marvell,sheeva-88SV131"; - clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>; - clock-names = "cpu_clk", "ddrclk", "powersave"; - };
Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.txt deleted +0 -105
105 lines not on this page · raw message
Documentation/devicetree/bindings/arm/marvell/marvell,kirkwood.yaml new file +266 -0
266 lines not on this page · raw message
Signature · 1 line
2.47.2