dt-bindings: timer/rtc: Remove duplicate st,stih407-lpc bindings
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: timer/rtc: Remove duplicate st,stih407-lpc bindings
The "st,stih407-lpc" binding is documented in 3 places as it can function as a timer, watchdog, or RTC. As there's already a schema for it in watchdogy/st,stih407-lpc.yaml, remove the other text bindings.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../devicetree/bindings/rtc/rtc-st-lpc.txt | 28 ------------------- .../devicetree/bindings/timer/st,stih407-lpc | 28 ------------------- 2 files changed, 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt delete mode 100644 Documentation/devicetree/bindings/timer/st,stih407-lpc
Documentation/devicetree/bindings/rtc/rtc-st-lpc.txt deleted +0 -28
@@ -1,28 +0,0 @@ -STMicroelectronics Low Power Controller (LPC) - RTC -=================================================== - -LPC currently supports Watchdog OR Real Time Clock OR Clocksource -functionality. - -[See: ../watchdog/st_lpc_wdt.txt for Watchdog options] -[See: ../timer/st,stih407-lpc for Clocksource options] - -Required properties - -- compatible : Must be: "st,stih407-lpc" -- reg : LPC registers base address + size -- interrupts : LPC interrupt line number and associated flags -- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) -- st,lpc-mode : The LPC can run either one of three modes: - ST_LPC_MODE_RTC [0] - ST_LPC_MODE_WDT [1] - ST_LPC_MODE_CLKSRC [2] - One (and only one) mode must be selected. - -Example: - lpc@fde05000 { - compatible = "st,stih407-lpc"; - reg = <0xfde05000 0x1000>; - clocks = <&clk_s_d3_flexgen CLK_LPC_0>; - st,lpc-mode = <ST_LPC_MODE_RTC>; - };
Documentation/devicetree/bindings/timer/st,stih407-lpc deleted +0 -28
@@ -1,28 +0,0 @@ -STMicroelectronics Low Power Controller (LPC) - Clocksource -=========================================================== - -LPC currently supports Watchdog OR Real Time Clock OR Clocksource -functionality. - -[See: ../watchdog/st_lpc_wdt.txt for Watchdog options] -[See: ../rtc/rtc-st-lpc.txt for RTC options] - -Required properties - -- compatible : Must be: "st,stih407-lpc" -- reg : LPC registers base address + size -- interrupts : LPC interrupt line number and associated flags -- clocks : Clock used by LPC device (See: ../clock/clock-bindings.txt) -- st,lpc-mode : The LPC can run either one of three modes: - ST_LPC_MODE_RTC [0] - ST_LPC_MODE_WDT [1] - ST_LPC_MODE_CLKSRC [2] - One (and only one) mode must be selected. - -Example: - lpc@fde05000 { - compatible = "st,stih407-lpc"; - reg = <0xfde05000 0x1000>; - clocks = <&clk_s_d3_flexgen CLK_LPC_0>; - st,lpc-mode = <ST_LPC_MODE_CLKSRC>; - };
Signature · 1 line
2.47.2
Rob Herring
maintainerQuoted 4 lines · Rob Herring (Arm)
The "st,stih407-lpc" binding is documented in 3 places as it can function as a timer, watchdog, or RTC. As there's already a schema for it in
watchdogy/st,stih407-lpc.yaml, remove the other text bindings.
I'm confused... The schema is only sitting in my tree, so I'll resend with the conversion...
Rob