Skip to contentSkip to conversation

dt-bindings: display: Drop duplicate ti,opa362 binding

PATCH In review Rob Herring (Arm) 3 participants 3 messages Aug 7, 2025 – Aug 8, 2025

Subsystems (4)
Device tree bindings DRM drivers DRM misc DRM drivers for TI OMAP
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: display: Drop duplicate ti,opa362 binding

The "ti,opa362" binding is already supported in simple-bridge.yaml, so remove the old binding doc.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../bindings/display/ti/ti,opa362.txt         | 38 -------------------
 1 file changed, 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/ti/ti,opa362.txt
Documentation/devicetree/bindings/display/ti/ti,opa362.txt deleted +0 -38
deleted file mode 100644
index f96083c0bd17..000000000000
@@ -1,38 +0,0 @@
-OPA362 analog video amplifier
-
-Required properties:
-- compatible: "ti,opa362"
-- enable-gpios: enable/disable output gpio
-
-Required node:
-- Video port 0 for opa362 input
-- Video port 1 for opa362 output
-
-Example:
-
-tv_amp: opa362 {
-	compatible = "ti,opa362";
-	enable-gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			opa_in: endpoint@0 {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-			opa_out: endpoint@0 {
-				remote-endpoint = <&tv_connector_in>;
-			};
-		};
-	};
-};
-
-
-
Signature · 1 line
2.47.2
maintainer Reviewed-by on v1 1/1
#1 lore raw

Hi,

Quoted 43 lines · Rob Herring (Arm)

The "ti,opa362" binding is already supported in simple-bridge.yaml, so remove the old binding doc.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../bindings/display/ti/ti,opa362.txt         | 38 -------------------
 1 file changed, 38 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/ti/ti,opa362.txt
Documentation/devicetree/bindings/display/ti/ti,opa362.txt deleted +0 -28
deleted file mode 100644
index f96083c0bd17..000000000000
@@ -1,38 +0,0 @@
-OPA362 analog video amplifier
-
-Required properties:
-- compatible: "ti,opa362"
-- enable-gpios: enable/disable output gpio
-
-Required node:
-- Video port 0 for opa362 input
-- Video port 1 for opa362 output
-
-Example:
-
-tv_amp: opa362 {
-	compatible = "ti,opa362";
-	enable-gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-			opa_in: endpoint@0 {
-				remote-endpoint = <&venc_out>;
-			};
-		};
-
-		port@1 {

Documentation/devicetree/bindings/display/ti/ti,opa362.txt line 38

Quoted 10 lines
Documentation/devicetree/bindings/display/ti/ti,opa362.txt deleted +0 -10
-			reg = <1>;
-			opa_out: endpoint@0 {
-				remote-endpoint = <&tv_connector_in>;
-			};
-		};
-	};
-};
-
-
-
Reviewed-by Tomi Valkeinen <[email protected]>

Tomi