ALSA: hda: Add TAS5825 support
Subsystems (3)
Baojun Xu
maintainerPATCH 1/1 ALSA: hda: Add TAS5825 support
Add TAS5825 support in TI's HDA driver.
TAS5825 is an on-chip DSP, but no calibration is required, and no global address support smart amplifier devices.
Signed-off-by Baojun Xu <[email protected]>
--- include/sound/tas2781-dsp.h | 3 + include/sound/tas2781.h | 4 +- include/sound/tas5825-tlv.h | 24 +++++++ .../hda/codecs/side-codecs/tas2781_hda_i2c.c | 28 ++++++++ sound/soc/codecs/tas2781-fmwlib.c | 67 ++++++++++++++++++- 5 files changed, 121 insertions(+), 5 deletions(-) create mode 100644 include/sound/tas5825-tlv.h
include/sound/tas2781-dsp.h +3 -0
@@ -34,6 +34,7 @@#define PPC3_VERSION_TAS2781_BASIC_MIN 0x14600#define PPC3_VERSION_TAS2781_ALPHA_MIN 0x4a00#define PPC3_VERSION_TAS2781_BETA_MIN 0x19400 +#define PPC3_VERSION_TAS5825_BASE 0x114200#define TASDEVICE_DEVICE_SUM 8#define TASDEVICE_CONFIG_SUM 64
@@ -53,6 +54,8 @@ enum tasdevice_dsp_dev_idx {TASDEVICE_DSP_TAS_2781_DUAL_MONO ,TASDEVICE_DSP_TAS_2781_21 ,TASDEVICE_DSP_TAS_2781_QUAD , +TASDEVICE_DSP_TAS_5825_MONO , +TASDEVICE_DSP_TAS_5825_DUAL , TASDEVICE_DSP_TAS_MAX_DEVICE };
include/sound/tas2781.h +2 -2
@@ -49,9 +49,9 @@#define TASDEVICE_REG (book, page, reg) (((book * 256 * 128) + \ (page * 128)) + reg) -/* Software Reset */ +/* Software Reset, compatble with new device (TAS5825). */ #define TASDEVICE_REG_SWRESET TASDEVICE_REG(0x0, 0x0, 0x01) -#define TASDEVICE_REG_SWRESET_RESET BIT(0) +#define TASDEVICE_REG_SWRESET_RESET (BIT(0) | BIT(4))/* Checksum */ #define TASDEVICE_CHECKSUM_REG TASDEVICE_REG(0x0, 0x0, 0x7e)
include/sound/tas5825-tlv.h new file +24 -0
@@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +// +// ALSA SoC Texas Instruments TAS5825 Audio Smart Amplifier +// +// Copyright (C) 2025 Texas Instruments Incorporated +// https://www.ti.com +// +// The TAS5825 hda driver implements for one or two TAS5825 chips. +// +// Author: Baojun Xu <[email protected]> +// + +#ifndef __TAS5825_TLV_H__ +#define __TAS5825_TLV_H__ + +#define TAS5825_DVC_LEVEL TASDEVICE_REG(0x0, 0x0, 0x4c) +#define TAS5825_AMP_LEVEL TASDEVICE_REG(0x0, 0x0, 0x54) + +static const __maybe_unused DECLARE_TLV_DB_SCALE ( + tas5825_dvc_tlv, -10300, 50, 0); +static const __maybe_unused DECLARE_TLV_DB_SCALE ( + tas5825_amp_tlv, -1550, 50, 0); + +#endif
sound/hda/codecs/side-codecs/tas2781_hda_i2c.c +28 -0
@@ -26,6 +26,7 @@#include <sound/tlv.h> #include <sound/tas2770-tlv.h> #include <sound/tas2781-tlv.h> +#include <sound/tas5825-tlv.h> #include "hda_local.h" #include "hda_auto_parser.h"
@@ -50,6 +51,7 @@ enum device_chip_id {HDA_TAS2563 ,HDA_TAS2770 ,HDA_TAS2781 , +HDA_TAS5825 , HDA_OTHERS };
@@ -272,6 +274,17 @@ static const struct snd_kcontrol_new tas2781_snd_controls[] = { tas2781_force_fwload_get, tas2781_force_fwload_put), }; +static const struct snd_kcontrol_new tas5825_snd_controls[] = { +ACARD_SINGLE_RANGE_EXT_TLV ("Speaker Analog Volume" ,TAS5825_AMP_LEVEL , +0 ,0 ,31 ,1 , tas2781_amp_getvol, + tas2781_amp_putvol, tas5825_amp_tlv), +ACARD_SINGLE_RANGE_EXT_TLV ("Speaker Digital Volume" ,TAS5825_DVC_LEVEL , +0 ,0 ,254 ,1 , tas2781_amp_getvol, + tas2781_amp_putvol, tas5825_dvc_tlv), +ACARD_SINGLE_BOOL_EXT ("Speaker Force Firmware Load" ,0 , + tas2781_force_fwload_get, tas2781_force_fwload_put), +}; +static const struct snd_kcontrol_new tasdevice_prof_ctrl = { .name ="Speaker Profile Id" , .iface =SNDRV_CTL_ELEM_IFACE_CARD ,
@@ -501,6 +514,12 @@ static void tasdev_fw_ready(const struct firmware *fmw, void *context) ARRAY_SIZE(tas2781_snd_controls));tasdevice_dspfw_init (context);break ; +case HDA_TAS5825 : +tasdev_add_kcontrols (tas_priv, hda_priv->snd_ctls, codec, + &tas5825_snd_controls[0 ], +ARRAY_SIZE (tas5825_snd_controls)); +tasdevice_dspfw_init (context); +break ;case HDA_TAS2563 :tasdevice_dspfw_init (context);break ;
@@ -628,6 +647,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt) }else if (strstarts (dev_name (&clt->dev),"i2c-TXNW2781:00-tas2781-hda.0" )) { device_name ="TXNW2781" ; + hda_priv->hda_chip_id =HDA_TAS2781 ; hda_priv->save_calibration = tas2781_save_calibration; tas_hda->priv->global_addr =TAS2781_GLOBAL_ADDR ; }else if (strstr (dev_name (&clt->dev),"INT8866" )) {
@@ -639,6 +659,13 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt) hda_priv->hda_chip_id =HDA_TAS2563 ; hda_priv->save_calibration = tas2563_save_calibration; tas_hda->priv->global_addr =TAS2563_GLOBAL_ADDR ; + }else if (strstarts (dev_name (&clt->dev),"i2c-TXNW5825" )) { +/* +* TAS5825, integrated on-chip DSP without +* global I2C address and calibration supported. +*/ + device_name ="TXNW5825" ; + hda_priv->hda_chip_id =HDA_TAS5825 ; }else {return -ENODEV ; }
@@ -775,6 +802,7 @@ static const struct acpi_device_id tas2781_acpi_hda_match[] = { {"TIAS2781", 0 }, {"TXNW2770", 0 }, {"TXNW2781", 0 }, + {"TXNW5825", 0 }, {} };MODULE_DEVICE_TABLE (acpi, tas2781_acpi_hda_match);
sound/soc/codecs/tas2781-fmwlib.c +64 -3
91 lines not on this page · raw message
Signature · 1 line
2.43.0
Quoted 3 lines · Baojun Xu
Add TAS5825 support in TI's HDA driver.
TAS5825 is an on-chip DSP, but no calibration is required, and no global address support smart amplifier devices.
Acked-by Mark Brown <[email protected]>
Quoted 6 lines · Baojun Xu
Add TAS5825 support in TI's HDA driver.
TAS5825 is an on-chip DSP, but no calibration is required, and no global address support smart amplifier devices.Signed-off-by Baojun Xu <[email protected]>
Applied now. Thanks.
Takashi