package/gcc: 2024.12 ARC gcc is in fact based on GCC 14.x
PATCH 1/3 package/gcc: 2024.12 ARC gcc is in fact based on GCC 14.x
Contrary to what was done in 8ef2ba2ec3cedae92c585135d3a1c5ae3e0f63d8 ("package/{gcc, binutils, gdb}: update ARC version to 2024.12"), the ARC gcc version 2024.12 is in fact based on GCC 14.2. This can be verified at:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2024.12-release
Which states "GCC 14.2 with ARC patches".
--- package/gcc/Config.in.host | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
package/gcc/Config.in.host +2 -2
@@ -10,10 +10,10 @@ choice Select the version of gcc you wish to use. config BR2_GCC_VERSION_ARC - bool "gcc arc (15.1)" + bool "gcc arc (14.2)" # Only supported architecture depends on BR2_arc - select BR2_TOOLCHAIN_GCC_AT_LEAST_15 + select BR2_TOOLCHAIN_GCC_AT_LEAST_14 config BR2_GCC_VERSION_POWERPC_SPE bool "gcc powerpc spe"
Signature · 6 lines
2.50.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 2/3 support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
This issue has been fixed in the Bootlin toolchains thanks to the Microblaze "atomic fix" in GCC.
--- support/scripts/gen-bootlin-toolchains | 5 ----- 1 file changed, 5 deletions(-)
support/scripts/gen-bootlin-toolchains +0 -5
@@ -479,11 +479,6 @@ def get_toolchains(): variant = "bleeding-edge" version = parts[2][len("bleeding-edge-"):] - # GCC 14.x on Microblaze is very broken, see - # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=118280 - if arch in ["microblazeel", "microblazebe"] and variant == "bleeding-edge": - continue - tmp[(arch, libc, variant)] = version if len(tmp) == 0:
Signature · 6 lines
2.50.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
Hello Thomas, All,
Le 10/08/2025 à 14:48, Thomas Petazzoni via buildroot a écrit :
Quoted 2 lines
This issue has been fixed in the Bootlin toolchains thanks to the Microblaze "atomic fix" in GCC.
I guess you are referring to the pending patch from Neal Frager [1].
[1]
https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/
Note: patch 3/3 was not received yet on the mailing list (patch too big probably).
Best regards,
Romain
Quoted 12 lines
Signed-off-by Thomas Petazzoni <[email protected]>--- support/scripts/gen-bootlin-toolchains | 5 ----- 1 file changed, 5 deletions(-)support/scripts/gen-bootlin-toolchains +0
-0@@ -479,11 +479,6 @@ def get_toolchains(): variant = "bleeding-edge"
support/scripts/gen-bootlin-toolchains def get_toolchains(): · line 484
Quoted 10 lines
support/scripts/gen-bootlin-toolchains +0
-5version = parts[2][len("bleeding-edge-"):] - # GCC 14.x on Microblaze is very broken, see - # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=118280 - if arch in ["microblazeel", "microblazebe"] and variant == "bleeding-edge": - continue - tmp[(arch, libc, variant)] = version if len(tmp) == 0:
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
Quoted 4 lines · On Sun, 10 Aug 2025 16:11:09 +0200 Romain Naour <[email protected]> wrote:
I guess you are referring to the pending patch from Neal Frager [1].
[1]
https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/
Correct. This patch is pending for Buildroot master, but I did integrate it into my toolchain build.
Quoted 1 line
Note: patch 3/3 was not received yet on the mailing list (patch too big probably).
Ah, good point. I approved the patch, which was sitting in the moderation queue (indeed it was too large).
Thanks a lot!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
Quoted 5 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni via buildroot <[email protected]> writes:
On Sun, 10 Aug 2025 16:11:09 +0200
Romain Naour <[email protected]> wrote:
Quoted 7 lines
Quoted 4 lines
I guess you are referring to the pending patch from Neal Frager [1].
[1]
https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/Correct. This patch is pending for Buildroot master, but I did integrate it into my toolchain build.
I wanted to apply this and get 2025.08-rc1 out - But if I read the discussion correctly, gcc 15.x is broken on Microblaze even with that patch, so what do we do?
Signature · 5 lines
Bye, Peter Korsgaard _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
Hello Peter, Thomas, All,
Le 10/08/2025 à 20:40, Peter Korsgaard a écrit :
Quoted 10 lines
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni via buildroot <[email protected]> writes:
Quoted 4 lines · On Sun, 10 Aug 2025 16:11:09 +0200 Romain Naour <[email protected]> wrote:
I guess you are referring to the pending patch from Neal Frager [1].
[1]
https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/
Quoted 7 lines
Quoted 2 lines
Correct. This patch is pending for Buildroot master, but I did integrate it into my toolchain build.
I wanted to apply this and get 2025.08-rc1 out - But if I read the discussion correctly, gcc 15.x is broken on Microblaze even with that patch, so what do we do?
Yes, we need another patch [1] to be able to test the rootfs with Qemu. Obviously this patch [1] is still unsure (except if you let me patch gcc code :p)
[1]
https://github.com/bootlin/buildroot-toolchains/commit/83947c7bb6158072bc2f52b58e90891cd3dc04a2
Best regards,
Romain
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
Quoted 22 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Romain" == Romain Naour <[email protected]> writes:
Hello Peter, Thomas, All,
Le 10/08/2025 à 20:40, Peter Korsgaard a écrit :Quoted 10 lines
Quoted 9 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni via buildroot <[email protected]> writes:
Quoted 4 lines · On Sun, 10 Aug 2025 16:11:09 +0200 Romain Naour <[email protected]> wrote:
I guess you are referring to the pending patch from Neal Frager [1].
[1]
https://patchwork.ozlabs.org/project/buildroot/patch/[email protected]/Quoted 7 lines
Quoted 2 lines
Correct. This patch is pending for Buildroot master, but I did integrate it into my toolchain build.
I wanted to apply this and get 2025.08-rc1 out - But if I read the discussion correctly, gcc 15.x is broken on Microblaze even with that patch, so what do we do?
Quoted 5 lines
Yes, we need another patch [1] to be able to test the rootfs with Qemu. Obviously this patch [1] is still unsure (except if you let me patch gcc code :p)
[1]
https://github.com/bootlin/buildroot-toolchains/commit/83947c7bb6158072bc2f52b58e90891cd3dc04a2
Ahh. so the issue is (most likely) solved in the bootlin toolchains? Good, then lets add them.
Signature · 5 lines
Bye, Peter Korsgaard _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
In reply to Romain Naour via buildrootQuoted 2 lines · On Sun, 10 Aug 2025 21:08:00 +0200 Romain Naour <[email protected]> wrote:
Yes, we need another patch [1] to be able to test the rootfs with Qemu. Obviously this patch [1] is still unsure (except if you let me patch gcc code :p)
I think this patch is reasonably OK. First of all, it very obviously only touches Microblaze code, so at worst we risk breaking Microblaze... which is anyway already broken. Also, this patch basically restore the behavior that was happening on Microblaze prior to
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=3b9b8d6cfdf59337f4b7ce10ce92a98044b2657b.
So overall, I think Romain you can submit this as a proper patch to Buildroot, I think it's a "good enough" workaround for something like Microblaze.
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
Hello Thomas,
Le 10/08/2025 à 22:16, Thomas Petazzoni a écrit :
Quoted 6 lines
Quoted 2 lines · On Sun, 10 Aug 2025 21:08:00 +0200 Romain Naour <[email protected]> wrote:
Yes, we need another patch [1] to be able to test the rootfs with Qemu. Obviously this patch [1] is still unsure (except if you let me patch gcc code :p)
Quoted 9 lines
I think this patch is reasonably OK. First of all, it very obviously only touches Microblaze code, so at worst we risk breaking Microblaze... which is anyway already broken. Also, this patch basically restore the behavior that was happening on Microblaze prior to
https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=3b9b8d6cfdf59337f4b7ce10ce92a98044b2657b.
So overall, I think Romain you can submit this as a proper patch to Buildroot, I think it's a "good enough" workaround for something like Microblaze.
Done:
https://lore.kernel.org/buildroot/[email protected]/T/#u
Best regards,
Romain
Quoted 2 lines
Thomas
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH 2/3] support/scripts/gen-bootlin-toolchains: drop tweak for Microblaze bleeding-edge toolchains
In reply to Thomas Petazzoni via buildrootQuoted 6 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni via buildroot <[email protected]> writes:
This issue has been fixed in the Bootlin toolchains thanks to the Microblaze "atomic fix" in GCC.
Signed-off-by Thomas Petazzoni <[email protected]>
Committed, thanks.
Signature · 5 lines
Bye, Peter Korsgaard _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hello Thomas, All,
Le 10/08/2025 à 14:48, Thomas Petazzoni via buildroot a écrit :
Quoted 8 lines
Contrary to what was done in
8ef2ba2ec3cedae92c585135d3a1c5ae3e0f63d8("package/{gcc, binutils, gdb}: update ARC version to 2024.12"), the ARC gcc version 2024.12 is in fact based on GCC 14.2. This can be verified at:https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2024.12-release
Which states "GCC 14.2 with ARC patches".
Indeed,
cat output/host-gcc-initial-arc-2024.12-release/gcc/BASE-VER 14.2.0
Patch 1/3 applied to master, thanks.
Best regards,
Romain
Quoted 14 lines
Fixes 8ef2ba2ec3cedae92c585135d3a1c5ae3e0f63d8 ("package/{gcc, binutils, gdb}: update ARC version to 2024.12")Signed-off-by Thomas Petazzoni <[email protected]>--- package/gcc/Config.in.host | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)package/gcc/Config.in.host +0
-0@@ -10,10 +10,10 @@ choice Select the version of gcc you wish to use.
package/gcc/Config.in.host choice · line 19
Quoted 10 lines
package/gcc/Config.in.host +2
-2config BR2_GCC_VERSION_ARC - bool "gcc arc (15.1)" + bool "gcc arc (14.2)" # Only supported architecture depends on BR2_arc - select BR2_TOOLCHAIN_GCC_AT_LEAST_15 + select BR2_TOOLCHAIN_GCC_AT_LEAST_14 config BR2_GCC_VERSION_POWERPC_SPE bool "gcc powerpc spe"
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH 3/3 toolchain/toolchain-external/toolchain-external-bootlin: update to Bootlin toolchains 2025.08-1
In reply to Thomas Petazzoni via buildrootThe toolchains have been rebuilt with a recent Buildroot, and are based on:
- Stable toolchains:
GCC 14.3
Binutils 2.43.1
GDB 15.2
Linux headers 5.4
glibc 2.41
musl 1.2.5
uclibc-ng 1.0.45
- Bleeding edge toolchains
GCC 15.1
Binutils 2.44
GDB 16.3
Linux headers 5.15
glibc 2.41
musl 1.2.5
uclibc-ng 1.0.45
The microblaze bleeding-edge toolchains are back, since we integrated the "atomic issue" fix.
All tests are successful:
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/1976388296
(note: the test branch had one more commit doing tweaks on the wget option and re-enabling the backup site for unit tests, which are needed to avoid intermittent failures of Gitlab CI jobs)
--- .../tests/toolchain/test_external_bootlin.py | 84 + .../Config.in.options | 1614 +++++++++-------- .../toolchain-external-bootlin.hash | 860 ++++----- .../toolchain-external-bootlin.mk | 460 ++--- 4 files changed, 1645 insertions(+), 1373 deletions(-)
support/testing/tests/toolchain/test_external_bootlin.py +84 -0
@@ -795,6 +795,20 @@ class TestExternalToolchainBootlinM68kcoldfireUclibcStable(TestExternalToolchain TestExternalToolchain.common_check(self) +class TestExternalToolchainBootlinMicroblazebeGlibcBleedingEdge(TestExternalToolchain): + config = """ + BR2_microblazebe=y + BR2_TOOLCHAIN_EXTERNAL=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_GLIBC_BLEEDING_EDGE=y + # BR2_TARGET_ROOTFS_TAR is not set + """ + toolchain_prefix = "microblaze-linux" + + def test_run(self): + TestExternalToolchain.common_check(self) + + class TestExternalToolchainBootlinMicroblazebeGlibcStable(TestExternalToolchain): config = """ BR2_microblazebe=y
@@ -809,6 +823,20 @@ class TestExternalToolchainBootlinMicroblazebeGlibcStable(TestExternalToolchain) TestExternalToolchain.common_check(self) +class TestExternalToolchainBootlinMicroblazebeMuslBleedingEdge(TestExternalToolchain): + config = """ + BR2_microblazebe=y + BR2_TOOLCHAIN_EXTERNAL=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_MUSL_BLEEDING_EDGE=y + # BR2_TARGET_ROOTFS_TAR is not set + """ + toolchain_prefix = "microblaze-linux" + + def test_run(self): + TestExternalToolchain.common_check(self) + + class TestExternalToolchainBootlinMicroblazebeMuslStable(TestExternalToolchain): config = """ BR2_microblazebe=y
@@ -823,6 +851,20 @@ class TestExternalToolchainBootlinMicroblazebeMuslStable(TestExternalToolchain): TestExternalToolchain.common_check(self) +class TestExternalToolchainBootlinMicroblazebeUclibcBleedingEdge(TestExternalToolchain): + config = """ + BR2_microblazebe=y + BR2_TOOLCHAIN_EXTERNAL=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEBE_UCLIBC_BLEEDING_EDGE=y + # BR2_TARGET_ROOTFS_TAR is not set + """ + toolchain_prefix = "microblaze-linux" + + def test_run(self): + TestExternalToolchain.common_check(self) + + class TestExternalToolchainBootlinMicroblazebeUclibcStable(TestExternalToolchain): config = """ BR2_microblazebe=y
@@ -837,6 +879,20 @@ class TestExternalToolchainBootlinMicroblazebeUclibcStable(TestExternalToolchain TestExternalToolchain.common_check(self) +class TestExternalToolchainBootlinMicroblazeelGlibcBleedingEdge(TestExternalToolchain): + config = """ + BR2_microblazeel=y + BR2_TOOLCHAIN_EXTERNAL=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_GLIBC_BLEEDING_EDGE=y + # BR2_TARGET_ROOTFS_TAR is not set + """ + toolchain_prefix = "microblazeel-linux" + + def test_run(self): + TestExternalToolchain.common_check(self) + + class TestExternalToolchainBootlinMicroblazeelGlibcStable(TestExternalToolchain): config = """ BR2_microblazeel=y
@@ -851,6 +907,20 @@ class TestExternalToolchainBootlinMicroblazeelGlibcStable(TestExternalToolchain) TestExternalToolchain.common_check(self) +class TestExternalToolchainBootlinMicroblazeelMuslBleedingEdge(TestExternalToolchain): + config = """ + BR2_microblazeel=y + BR2_TOOLCHAIN_EXTERNAL=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_MUSL_BLEEDING_EDGE=y + # BR2_TARGET_ROOTFS_TAR is not set + """ + toolchain_prefix = "microblazeel-linux" + + def test_run(self): + TestExternalToolchain.common_check(self) + + class TestExternalToolchainBootlinMicroblazeelMuslStable(TestExternalToolchain): config = """ BR2_microblazeel=y
@@ -865,6 +935,20 @@ class TestExternalToolchainBootlinMicroblazeelMuslStable(TestExternalToolchain): TestExternalToolchain.common_check(self) +class TestExternalToolchainBootlinMicroblazeelUclibcBleedingEdge(TestExternalToolchain): + config = """ + BR2_microblazeel=y + BR2_TOOLCHAIN_EXTERNAL=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN=y + BR2_TOOLCHAIN_EXTERNAL_BOOTLIN_MICROBLAZEEL_UCLIBC_BLEEDING_EDGE=y + # BR2_TARGET_ROOTFS_TAR is not set + """ + toolchain_prefix = "microblazeel-linux" + + def test_run(self): + TestExternalToolchain.common_check(self) + + class TestExternalToolchainBootlinMicroblazeelUclibcStable(TestExternalToolchain): config = """ BR2_microblazeel=y
toolchain/toolchain-external/toolchain-external-bootlin/Config.in.options +877 -737
2,880 lines not on this page · raw message
toolchain/toolchain-external/toolchain-external-bootlin/toolchain-external-bootlin.hash +436 -424
860 lines not on this page · raw message
toolchain/toolchain-external/toolchain-external-bootlin/toolchain-external-bootlin.mk +248 -212
460 lines not on this page · raw message
The rest of this diff is not shown. View the raw message.
Signature · 6 lines
2.50.1 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Part of the diff is not shown here. View the raw message.
Re: [Buildroot] [PATCH 3/3] toolchain/toolchain-external/toolchain-external-bootlin: update to Bootlin toolchains 2025.08-1
Quoted 28 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Thomas" == Thomas Petazzoni via buildroot <[email protected]> writes:
The toolchains have been rebuilt with a recent Buildroot, and are based on:
- Stable toolchains:
GCC 14.3
Binutils 2.43.1
GDB 15.2
Linux headers 5.4
glibc 2.41
musl 1.2.5
uclibc-ng 1.0.45- Bleeding edge toolchains
GCC 15.1
Binutils 2.44
GDB 16.3
Linux headers 5.15
glibc 2.41
musl 1.2.5
uclibc-ng 1.0.45The microblaze bleeding-edge toolchains are back, since we integrated the "atomic issue" fix.
All tests are successful:
Quoted 7 lines
https://gitlab.com/tpetazzoni/buildroot/-/pipelines/1976388296
(note: the test branch had one more commit doing tweaks on the wget option and re-enabling the backup site for unit tests, which are needed to avoid intermittent failures of Gitlab CI jobs)
Signed-off-by Thomas Petazzoni <[email protected]>
Committed, thanks.
Signature · 5 lines
Bye, Peter Korsgaard _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot