Skip to contentSkip to conversation

arm64: dts: imx8dxl-ss-conn: Disable USB3 nodes

PATCH Applied Alexander Dahl 3 participants 3 messages Aug 11, 2025 – Aug 22, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 arm64: dts: imx8dxl-ss-conn: Disable USB3 nodes

The i.MX 8DualXLite/8SoloXLite has a different connectivity memory map than the generic i.MX8 has. One conflicting resource is usb, where the imx8dxl has a second usb2 phy @5b110000, while the generic imx8 dtsi has one usb2 phy and one usb3 phy, and the usb3otg @5b110000. When including both imx8dxl-ss-conn.dtsi and imx8-ss-conn.dtsi as done in imx8dxl.dtsi this leads to a duplicate unit-address warning.

The usb3otg node was introduced after the initial imx8dxl support with commit a8bd7f155126 ("arm64: dts: imx8qxp: add cadence usb3 support") and since then leads to warnings like this (when built with W=2):

      DTC     arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
    …/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi:148.24-182.4: Warning (unique_unit_address): /bus@5b000000/usb@5b110000: duplicate unit-address (also used in node /bus@5b000000/usbphy@5b110000)
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3

Delete usb3 related nodes at dxl to fix above warning.

---

Notes:
v3:
- reworded commit message (thrown out irrelevant parts)
- rebased on v6.17-rc1

v2:
- reworded commit message (build on mainline with W=2)
- rebased on v6.16-rc3
- Link: https://lore.kernel.org/linux-devicetree/[email protected]/

v1:
- Link: https://lore.kernel.org/linux-devicetree/[email protected]/

 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +2 -0
index 9b114bed084b..a66ba6d0a8c0 100644
@@ -5,6 +5,8 @@
 
 /delete-node/ &enet1_lpcg;
 /delete-node/ &fec2;
+/delete-node/ &usbotg3;
+/delete-node/ &usb3_phy;
 
 / {
 	conn_enet0_root_clk: clock-conn-enet0-root {

base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585

Signature · 1 line
2.39.5
maintainer Reviewed-by on v3 1/1
#1 lore raw
Quoted 11 lines · Alexander Dahl

The i.MX 8DualXLite/8SoloXLite has a different connectivity memory map than the generic i.MX8 has. One conflicting resource is usb, where the imx8dxl has a second usb2 phy @5b110000, while the generic imx8 dtsi has one usb2 phy and one usb3 phy, and the usb3otg @5b110000. When including both imx8dxl-ss-conn.dtsi and imx8-ss-conn.dtsi as done in imx8dxl.dtsi this leads to a duplicate unit-address warning.

The usb3otg node was introduced after the initial imx8dxl support with commit a8bd7f155126 ("arm64: dts: imx8qxp: add cadence usb3 support") and since then leads to warnings like this (when built with W=2):

Quoted 8 lines
      DTC     arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
    …/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi:148.24-182.4: Warning (unique_unit_address): /bus@5b000000/usb@5b110000: duplicate unit-address (also used in node /bus@5b000000/usbphy@5b110000)
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3

Delete usb3 related nodes at dxl to fix above warning.

Quoted 36 lines

---

Notes:
v3:
- reworded commit message (thrown out irrelevant parts)
- rebased on v6.17-rc1

v2:
- reworded commit message (build on mainline with W=2)
- rebased on v6.16-rc3
- Link: https://lore.kernel.org/linux-devicetree/[email protected]/

v1:
- Link: https://lore.kernel.org/linux-devicetree/[email protected]/

 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi | 2 ++
 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi +2 -0
index 9b114bed084b..a66ba6d0a8c0 100644
@@ -5,6 +5,8 @@
 
 /delete-node/ &enet1_lpcg;
 /delete-node/ &fec2;
+/delete-node/ &usbotg3;
+/delete-node/ &usb3_phy;
 
 / {
 	conn_enet0_root_clk: clock-conn-enet0-root {

base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585 --
2.39.5

Applied
#2 lore raw
In reply to Alexander Dahl
Quoted 11 lines · Alexander Dahl

The i.MX 8DualXLite/8SoloXLite has a different connectivity memory map than the generic i.MX8 has. One conflicting resource is usb, where the imx8dxl has a second usb2 phy @5b110000, while the generic imx8 dtsi has one usb2 phy and one usb3 phy, and the usb3otg @5b110000. When including both imx8dxl-ss-conn.dtsi and imx8-ss-conn.dtsi as done in imx8dxl.dtsi this leads to a duplicate unit-address warning.

The usb3otg node was introduced after the initial imx8dxl support with commit a8bd7f155126 ("arm64: dts: imx8qxp: add cadence usb3 support") and since then leads to warnings like this (when built with W=2):

Quoted 8 lines
      DTC     arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
    …/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi:148.24-182.4: Warning (unique_unit_address): /bus@5b000000/usb@5b110000: duplicate unit-address (also used in node /bus@5b000000/usbphy@5b110000)
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
      also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3

Delete usb3 related nodes at dxl to fix above warning.

Applied, thanks!