Skip to contentSkip to conversation

dt-bindings: mips: lantiq: ebu: add name pattern

PATCH In review Aleksander Jan Bajkowski 2 participants 6 messages Aug 15, 2025 – Aug 20, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 dt-bindings: mips: lantiq: ebu: add name pattern

Lantiq target doesn't use Common clock Framework and requires strict node names. This patch adds the name pattern to the binding.

---
 Documentation/devicetree/bindings/mips/lantiq/lantiq,ebu.yaml | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/mips/lantiq/lantiq,ebu.yaml +3 -0
index 0fada1f085a9..c1f31084f793 100644
@@ -10,6 +10,9 @@ maintainers:
   - John Crispin <[email protected]>
 
 properties:
+  $nodename:
+    pattern: "^ebu@[0-9a-f]+$"
+
   compatible:
     items:
       - enum:
Signature · 1 line
2.47.2
#1 lore raw

PATCH 2/3 dt-bindings: mips: lantiq: cgu: add name pattern

Lantiq target doesn't use Common clock Framework and requires strict node names. This patch adds the name pattern to the binding.

---
 Documentation/devicetree/bindings/mips/lantiq/lantiq,cgu.yaml | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/mips/lantiq/lantiq,cgu.yaml +3 -0
index d5805725befb..6a6127a09087 100644
@@ -10,6 +10,9 @@ maintainers:
   - John Crispin <[email protected]>
 
 properties:
+  $nodename:
+    pattern: "^cgu@[0-9a-f]+$"
+
   compatible:
     items:
       - enum:
Signature · 1 line
2.47.2
#2 lore raw

Re: [PATCH 2/3] dt-bindings: mips: lantiq: cgu: add name pattern

Quoted 2 lines · Aleksander Jan Bajkowski

Lantiq target doesn't use Common clock Framework and requires strict node names. This patch adds the name pattern to the binding.

Same problems.

Best regards,
Krzysztof

#3 lore raw

PATCH 3/3 dt-bindings: mips: lantiq: dma: add name pattern

In reply to Aleksander Jan Bajkowski

Lantiq target doesn't use Common clock Framework and requires strict node names. This patch adds the name pattern to the binding.

---
 .../devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml       | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/mips/lantiq/lantiq,dma-xway.yaml +3 -0
index 15d41bdbdc26..14bff3d058b7 100644
@@ -10,6 +10,9 @@ maintainers:
   - John Crispin <[email protected]>
 
 properties:
+  $nodename:
+    pattern: "^dma@[0-9a-f]+$"
+
   compatible:
     items:
       - enum:
Signature · 1 line
2.47.2
#4 lore raw

Re: [PATCH 3/3] dt-bindings: mips: lantiq: dma: add name pattern

Quoted 1 line · Aleksander Jan Bajkowski

Lantiq target doesn't use Common clock Framework and requires strict

And when it starts using CCF, then binding becomes wrong?

Best regards,
Krzysztof

#5 lore raw
In reply to Aleksander Jan Bajkowski
Quoted 1 line · Aleksander Jan Bajkowski

Lantiq target doesn't use Common clock Framework

CCF does not matter. It's Linux thingy. You describe here hardware.

Quoted 1 line

and requires strict

hm? where? I checked kernel sources and there is nothing like that.

Quoted 1 line

node names. This patch adds the name pattern to the binding.

Again, why?

Best regards,
Krzysztof