FAILED: patch "[PATCH] btrfs: populate otime when logging an inode item" failed to apply to 5.4-stable tree
Subsystems (2)
[email protected]
maintainerThe patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.4.y
git checkout FETCH_HEAD
git cherry-pick -x 1ef94169db0958d6de39f9ea6e063ce887342e2d
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025081801-shortlist-acutely-2100@gregkh' --subject-prefix 'PATCH 5.4.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1ef94169db0958d6de39f9ea6e063ce887342e2d Mon Sep 17 00:00:00 2001
From: Qu Wenruo <[email protected]>
Date: Wed, 2 Jul 2025 15:08:13 +0930
Subject: [PATCH] btrfs: populate otime when logging an inode item
[TEST FAILURE WITH EXPERIMENTAL FEATURES]
When running test case generic/508, the test case will fail with the new btrfs shutdown support:
generic/508 - output mismatch (see /home/adam/xfstests/results//generic/508.out.bad)
--- tests/generic/508.out 2022-05-11 11:25:30.806666664 +0930
+++ /home/adam/xfstests/results//generic/508.out.bad 2025-07-02 14:53:22.401824212 +0930
@@ -1,2 +1,6 @@
QA output created by 508
Silence is golden
+Before:
+After : stat.btime = Thu Jan 1 09:30:00 1970
+Before:
+After : stat.btime = Wed Jul 2 14:53:22 2025
...
(Run 'diff -u /home/adam/xfstests/tests/generic/508.out /home/adam/xfstests/results//generic/508.out.bad' to see the entire diff)Ran: generic/508
Failures: generic/508
Failed 1 of 1 tests
Please note that the test case requires shutdown support, thus the test case will be skipped using the current upstream kernel, as it doesn't have shutdown ioctl support.
[CAUSE]
The direct cause the 0 time stamp in the log tree:
leaf 30507008 items 2 free space 16057 generation 9 owner TREE_LOG leaf 30507008 flags 0x1(WRITTEN) backref revision 1 checksum stored e522548d
checksum calced e522548d
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 9 transid 9 size 0 nbytes 0 block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0 sequence 1 flags 0x0(none) atime 1751432947.492000000 (2025-07-02 14:39:07) ctime 1751432947.492000000 (2025-07-02 14:39:07) mtime 1751432947.492000000 (2025-07-02 14:39:07) otime 0.0 (1970-01-01 09:30:00) <<<
But the old fs tree has all the correct time stamp:
btrfs-progs v6.12
fs tree key (FS_TREE ROOT_ITEM 0)
leaf 30425088 items 2 free space 16061 generation 5 owner FS_TREE leaf 30425088 flags 0x1(WRITTEN) backref revision 1 checksum stored 48f6c57e
checksum calced 48f6c57e
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 3 transid 0 size 0 nbytes 16384 block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x0(none) atime 1751432947.0 (2025-07-02 14:39:07) ctime 1751432947.0 (2025-07-02 14:39:07) mtime 1751432947.0 (2025-07-02 14:39:07) otime 1751432947.0 (2025-07-02 14:39:07) <<<
The root cause is that fill_inode_item() in tree-log.c is only populating a/c/m time, not the otime (or btime in statx output).
Part of the reason is that, the vfs inode only has a/c/m time, no native btime support yet.
[FIX]
Thankfully btrfs has its otime stored in btrfs_inode::i_otime_sec and btrfs_inode::i_otime_nsec.
So what we really need is just fill the otime time stamp in fill_inode_item() of tree-log.c
There is another fill_inode_item() in inode.c, which is doing the proper otime population.
fs/btrfs/tree-log.c +3 -0
@@ -4233,6 +4233,9 @@ static void fill_inode_item(struct btrfs_trans_handle *trans,btrfs_set_timespec_sec (leaf, &item->ctime,inode_get_ctime_sec (inode));btrfs_set_timespec_nsec (leaf, &item->ctime,inode_get_ctime_nsec (inode)); +btrfs_set_timespec_sec (leaf, &item->otime,BTRFS_I (inode)->i_otime_sec); +btrfs_set_timespec_nsec (leaf, &item->otime,BTRFS_I (inode)->i_otime_nsec); +/* * We do not need to set the nbytes field, in fact during a fast fsync * its value may not even be correct, since a fast fsync does not wait
Sasha Levin
maintainerPATCH 1/1 btrfs: populate otime when logging an inode item
From: Qu Wenruo <[email protected]>
[ Upstream commit 1ef94169db0958d6de39f9ea6e063ce887342e2d ]
[TEST FAILURE WITH EXPERIMENTAL FEATURES]
When running test case generic/508, the test case will fail with the new btrfs shutdown support:
generic/508 - output mismatch (see /home/adam/xfstests/results//generic/508.out.bad)
--- tests/generic/508.out 2022-05-11 11:25:30.806666664 +0930
+++ /home/adam/xfstests/results//generic/508.out.bad 2025-07-02 14:53:22.401824212 +0930
@@ -1,2 +1,6 @@
QA output created by 508
Silence is golden
+Before:
+After : stat.btime = Thu Jan 1 09:30:00 1970
+Before:
+After : stat.btime = Wed Jul 2 14:53:22 2025
...
(Run 'diff -u /home/adam/xfstests/tests/generic/508.out /home/adam/xfstests/results//generic/508.out.bad' to see the entire diff)Ran: generic/508
Failures: generic/508
Failed 1 of 1 tests
Please note that the test case requires shutdown support, thus the test case will be skipped using the current upstream kernel, as it doesn't have shutdown ioctl support.
[CAUSE]
The direct cause the 0 time stamp in the log tree:
leaf 30507008 items 2 free space 16057 generation 9 owner TREE_LOG leaf 30507008 flags 0x1(WRITTEN) backref revision 1 checksum stored e522548d
checksum calced e522548d
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (257 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 9 transid 9 size 0 nbytes 0 block group 0 mode 100644 links 1 uid 0 gid 0 rdev 0 sequence 1 flags 0x0(none) atime 1751432947.492000000 (2025-07-02 14:39:07) ctime 1751432947.492000000 (2025-07-02 14:39:07) mtime 1751432947.492000000 (2025-07-02 14:39:07) otime 0.0 (1970-01-01 09:30:00) <<<
But the old fs tree has all the correct time stamp:
btrfs-progs v6.12
fs tree key (FS_TREE ROOT_ITEM 0)
leaf 30425088 items 2 free space 16061 generation 5 owner FS_TREE leaf 30425088 flags 0x1(WRITTEN) backref revision 1 checksum stored 48f6c57e
checksum calced 48f6c57e
fs uuid 57d45451-481e-43e4-aa93-289ad707a3a0
chunk uuid d52bd3fd-5163-4337-98a7-7986993ad398
item 0 key (256 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 3 transid 0 size 0 nbytes 16384 block group 0 mode 40755 links 1 uid 0 gid 0 rdev 0 sequence 0 flags 0x0(none) atime 1751432947.0 (2025-07-02 14:39:07) ctime 1751432947.0 (2025-07-02 14:39:07) mtime 1751432947.0 (2025-07-02 14:39:07) otime 1751432947.0 (2025-07-02 14:39:07) <<<
The root cause is that fill_inode_item() in tree-log.c is only populating a/c/m time, not the otime (or btime in statx output).
Part of the reason is that, the vfs inode only has a/c/m time, no native btime support yet.
[FIX]
Thankfully btrfs has its otime stored in btrfs_inode::i_otime_sec and btrfs_inode::i_otime_nsec.
So what we really need is just fill the otime time stamp in fill_inode_item() of tree-log.c
There is another fill_inode_item() in inode.c, which is doing the proper otime population.
--- fs/btrfs/tree-log.c | 5 +++++ 1 file changed, 5 insertions(+)
fs/btrfs/tree-log.c +5 -0
@@ -3941,6 +3941,11 @@ static void fill_inode_item(struct btrfs_trans_handle *trans,btrfs_set_token_timespec_nsec (leaf, &item->ctime, inode->i_ctime.tv_nsec, &token); +btrfs_set_token_timespec_sec (leaf, &item->otime, +BTRFS_I (inode)->i_otime.tv_sec, &token); +btrfs_set_token_timespec_nsec (leaf, &item->otime, +BTRFS_I (inode)->i_otime.tv_nsec, &token); +btrfs_set_token_inode_nbytes (leaf, item,inode_get_bytes (inode), &token);
Signature · 1 line
2.50.1