selftests/powerpc: fix spelling errors across test sources
PATCH 1/1 selftests/powerpc: fix spelling errors across test sources
Fix a number of minor spelling mistakes in selftests/powerpc sources, including ptrace, tm, pmu, math, alignment, and gzip tests. These changes improve readability of test messages and comments without affecting functionality as only comments were edited.
Signed-off-by Nikil Paul S <[email protected]>
--- .../selftests/powerpc/alignment/alignment_handler.c | 4 ++-- tools/testing/selftests/powerpc/math/vmx_preempt.c | 2 +- tools/testing/selftests/powerpc/math/vsx_asm.S | 2 +- tools/testing/selftests/powerpc/math/vsx_preempt.c | 2 +- tools/testing/selftests/powerpc/nx-gzip/gunz_test.c | 2 +- .../pmu/event_code_tests/group_constraint_cache_test.c | 4 ++-- .../pmu/event_code_tests/group_constraint_l2l3_sel_test.c | 6 +++--- .../group_constraint_radix_scope_qual_test.c | 4 ++-- .../event_code_tests/group_constraint_thresh_cmp_test.c | 8 ++++---- .../event_code_tests/group_constraint_thresh_ctl_test.c | 4 ++-- .../event_code_tests/group_constraint_thresh_sel_test.c | 4 ++-- .../pmu/event_code_tests/group_constraint_unit_test.c | 8 ++++---- tools/testing/selftests/powerpc/pmu/sampling_tests/misc.c | 4 ++-- .../powerpc/pmu/sampling_tests/mmcra_bhrb_cond_test.c | 2 +- .../sampling_tests/mmcra_bhrb_disable_no_branch_test.c | 2 +- .../powerpc/pmu/sampling_tests/mmcra_bhrb_disable_test.c | 2 +- .../powerpc/pmu/sampling_tests/mmcra_bhrb_ind_call_test.c | 2 +- tools/testing/selftests/powerpc/ptrace/ptrace-pkey.c | 2 +- tools/testing/selftests/powerpc/tm/tm-signal-msr-resv.c | 2 +- tools/testing/selftests/powerpc/tm/tm-signal-stack.c | 4 ++-- tools/testing/selftests/powerpc/tm/tm-sigreturn.c | 2 +- tools/testing/selftests/powerpc/tm/tm-tar.c | 2 +- tools/testing/selftests/powerpc/tm/tm-tmspr.c | 2 +- tools/testing/selftests/powerpc/tm/tm-trap.c | 4 ++-- 24 files changed, 40 insertions(+), 40 deletions(-)
tools/testing/selftests/powerpc/alignment/alignment_handler.c +2 -2
@@ -10,7 +10,7 @@* * We create two sets of source and destination buffers, one in regular memory, * the other cache-inhibited (by default we use /dev/fb0 for this, but an -* alterative path for cache-inhibited memory may be provided, e.g. memtrace). +* alternative path for cache-inhibited memory may be provided, e.g. memtrace). * * We initialise the source buffers, then use whichever set of load/store * instructions is under test to copy bytes from the source buffers to the
@@ -215,7 +215,7 @@ int test_memcmp(void *s1, void *s2, int n, int offset, char *test_name) }/* -* Do two memcpy tests using the same instructions. One cachable +* Do two memcpy tests using the same instructions. One cacheable * memory and the other doesn't. */ int do_test (char *test_name,void (*test_func)(char *,char *))
tools/testing/selftests/powerpc/math/vmx_preempt.c +1 -1
@@ -74,7 +74,7 @@ int test_preempt_vmx(void) }setbuf (stdout,NULL ); -/* Not really nessesary but nice to wait for every thread to start */ +/* Not really necessary but nice to wait for every thread to start */ printf ("\tWaiting for all workers to start..." );while (threads_starting) asmvolatile ("" : : :"memory" );
tools/testing/selftests/powerpc/math/vsx_asm.S +1 -1
@@ -7,7 +7,7 @@ #include "vsx_asm.h" #long check_vsx(vector int *r3); -#This function wraps storeing VSX regs to the end of an array and a +#This function wraps storing VSX regs to the end of an array and a #call to a comparison function in C which boils down to a memcmp() FUNC_START(check_vsx) PUSH_BASIC_STACK(32)
tools/testing/selftests/powerpc/math/vsx_preempt.c +1 -1
@@ -106,7 +106,7 @@ int test_preempt_vsx(void) }setbuf (stdout,NULL ); -/* Not really nessesary but nice to wait for every thread to start */ +/* Not really necessary but nice to wait for every thread to start */ printf ("\tWaiting for %d workers to start..." , threads_starting);while (threads_starting) asmvolatile ("" : : :"memory" );
tools/testing/selftests/powerpc/nx-gzip/gunz_test.c +1 -1
@@ -102,7 +102,7 @@ const int window_max = 1<<15;* the indirect (base) dde that points to a list of direct ddes. * See Section 6.4 of the NX-gzip user manual for DDE description. * Addr=NULL, len=0 clears the ddl[0]. Returns the total number of -* bytes in ddl. Caller is responsible for allocting the array of +* bytes in ddl. Caller is responsible for allocating the array of * nx_dde_t *ddl. If N addresses are required in the scatter-gather * list, the ddl array must have N+1 entries minimum. */
tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_cache_test.c +2 -2
@@ -31,7 +31,7 @@ static int group_constraint_cache(void)/* Check for platform support for the test */ SKIP_IF (platform_check_for_tests ()); -/* Init the events for the group contraint check for l1 cache select bits */ +/* Init the events for the group constraint check for l1 cache select bits */ event_init (&leader, EventCode_1);FAIL_IF (event_open (&leader));
@@ -42,7 +42,7 @@ static int group_constraint_cache(void)event_close (&event); -/* Init the event for the group contraint l1 cache select test */ +/* Init the event for the group constraint l1 cache select test */ event_init (&event, EventCode_3);/* Expected to succeed as sibling event request same l1 cache select bits as leader */
tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_l2l3_sel_test.c +3 -3
@@ -30,12 +30,12 @@ static int group_constraint_l2l3_sel(void)/* * Check for platform support for the test. -* This test is only aplicable on ISA v3.1 +* This test is only applicable on ISA v3.1 */ SKIP_IF (platform_check_for_tests ());SKIP_IF (!have_hwcap2 (PPC_FEATURE2_ARCH_3_1 )); -/* Init the events for the group contraint check for l2l3_sel bits */ +/* Init the events for the group constraint check for l2l3_sel bits */ event_init (&leader, EventCode_1);FAIL_IF (event_open (&leader));
@@ -46,7 +46,7 @@ static int group_constraint_l2l3_sel(void)event_close (&event); -/* Init the event for the group contraint l2l3_sel test */ +/* Init the event for the group constraint l2l3_sel test */ event_init (&event, EventCode_3);/* Expected to succeed as sibling event request same l2l3_sel bits as leader */
tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_radix_scope_qual_test.c +2 -2
@@ -26,12 +26,12 @@ static int group_constraint_radix_scope_qual(void)/* * Check for platform support for the test. -* This test is aplicable on ISA v3.1 only. +* This test is applicable on ISA v3.1 only. */ SKIP_IF (platform_check_for_tests ());SKIP_IF (!have_hwcap2 (PPC_FEATURE2_ARCH_3_1 )); -/* Init the events for the group contraint check for radix_scope_qual bits */ +/* Init the events for the group constraint check for radix_scope_qual bits */ event_init (&leader, EventCode_1);FAIL_IF (event_open (&leader));
tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_cmp_test.c +4 -4
@@ -37,7 +37,7 @@ static int group_constraint_thresh_cmp(void)SKIP_IF (platform_check_for_tests ());if (have_hwcap2 (PPC_FEATURE2_ARCH_3_1 )) { -/* Init the events for the group contraint check for thresh_cmp bits */ +/* Init the events for the group constraint check for thresh_cmp bits */ event_init (&leader, p10_EventCode_1);/* Add the thresh_cmp value for leader in config1 */
@@ -54,7 +54,7 @@ static int group_constraint_thresh_cmp(void)event_close (&event); -/* Init the event for the group contraint thresh compare test */ +/* Init the event for the group constraint thresh compare test */ event_init (&event, p10_EventCode_2);/* Add the same thresh_cmp value for leader and sibling event in config1 */
@@ -66,7 +66,7 @@ static int group_constraint_thresh_cmp(void)event_close (&leader);event_close (&event); }else { -/* Init the events for the group contraint check for thresh_cmp bits */ +/* Init the events for the group constraint check for thresh_cmp bits */ event_init (&leader, p9_EventCode_1);FAIL_IF (event_open (&leader));
@@ -77,7 +77,7 @@ static int group_constraint_thresh_cmp(void)event_close (&event); -/* Init the event for the group contraint thresh compare test */ +/* Init the event for the group constraint thresh compare test */ event_init (&event, p9_EventCode_3);/* Expected to succeed as sibling and leader event request same thresh_cmp bits */
tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_ctl_test.c +2 -2
@@ -35,7 +35,7 @@ static int group_constraint_thresh_ctl(void)/* Check for platform support for the test */ SKIP_IF (platform_check_for_tests ()); -/* Init the events for the group contraint thresh control test */ +/* Init the events for the group constraint thresh control test */ event_init (&leader, EventCode_1);FAIL_IF (event_open (&leader));
@@ -46,7 +46,7 @@ static int group_constraint_thresh_ctl(void)event_close (&event); -/* Init the event for the group contraint thresh control test */ +/* Init the event for the group constraint thresh control test */ event_init (&event, EventCode_3);/* Expected to succeed as sibling and leader event request same thresh_ctl bits */
tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_thresh_sel_test.c +2 -2
@@ -34,7 +34,7 @@ static int group_constraint_thresh_sel(void)/* Check for platform support for the test */ SKIP_IF (platform_check_for_tests ()); -/* Init the events for the group contraint thresh select test */ +/* Init the events for the group constraint thresh select test */ event_init (&leader, EventCode_1);FAIL_IF (event_open (&leader));
@@ -45,7 +45,7 @@ static int group_constraint_thresh_sel(void)event_close (&event); -/* Init the event for the group contraint thresh select test */ +/* Init the event for the group constraint thresh select test */ event_init (&event, EventCode_3);/* Expected to succeed as sibling and leader event request same thresh_sel bits */
tools/testing/selftests/powerpc/pmu/event_code_tests/group_constraint_unit_test.c +4 -4
@@ -21,7 +21,7 @@* Testcase for group constraint check of unit and pmc bits which is * used to program corresponding unit and pmc field in Monitor Mode * Control Register 1 (MMCR1) -* One of the event in the group should use PMC 4 incase units field +* One of the event in the group should use PMC 4 in case units field * value is within 6 to 9 otherwise event_open for the group will fail. */ static int group_constraint_unit (void )
@@ -37,21 +37,21 @@ static int group_constraint_unit(void)SKIP_IF (platform_check_for_tests ());SKIP_IF (have_hwcap2 (PPC_FEATURE2_ARCH_3_1 )); -/* Init the events for the group contraint check for unit bits */ +/* Init the events for the group constraint check for unit bits */ e = &events[0 ];event_init (e, EventCode_1);/* Expected to fail as PMC 4 is not used with unit field value 6 to 9 */ FAIL_IF (!event_open (&events[0 ])); -/* Init the events for the group contraint check for unit bits */ +/* Init the events for the group constraint check for unit bits */ e = &events[1 ];event_init (e, EventCode_2);/* Expected to pass as PMC 4 is used with unit field value 6 to 9 */ FAIL_IF (event_open (&events[1 ])); -/* Init the event for the group contraint unit test */ +/* Init the event for the group constraint unit test */ e = &events[2 ];event_init (e, EventCode_3);
tools/testing/selftests/powerpc/pmu/sampling_tests/misc.c +2 -2
@@ -466,7 +466,7 @@ int get_thresh_cmp_val(struct event event)return value;/* -* Incase of P10, thresh_cmp value is not part of raw event code +* In case of P10, thresh_cmp value is not part of raw event code * and provided via attr.config1 parameter. To program threshold in MMCRA, * take a 18 bit number N and shift right 2 places and increment * the exponent E by 1 until the upper 10 bits of N are zero.
@@ -498,7 +498,7 @@ int get_thresh_cmp_val(struct event event)* by comparing base_platform value from auxv and real * PVR value. * auxv_base_platform() func gives information of "base platform" -* corresponding to PVR value. Incase, if the distro doesn't +* corresponding to PVR value. In case, if the distro doesn't * support platform PVR (missing cputable support), base platform * in auxv will have a default value other than the real PVR's. * In this case, ISAv3 PMU (generic compat PMU) will be registered
tools/testing/selftests/powerpc/pmu/sampling_tests/mmcra_bhrb_cond_test.c +1 -1
@@ -29,7 +29,7 @@ static int mmcra_bhrb_cond_test(void)/* * Check for platform support for the test. -* This test is only aplicable on ISA v3.1 +* This test is only applicable on ISA v3.1 */ SKIP_IF (check_pvr_for_sampling_tests ());SKIP_IF (!have_hwcap2 (PPC_FEATURE2_ARCH_3_1 ));
tools/testing/selftests/powerpc/pmu/sampling_tests/mmcra_bhrb_disable_no_branch_test.c +1 -1
@@ -26,7 +26,7 @@ static int mmcra_bhrb_disable_no_branch_test(void)/* * Check for platform support for the test. -* This test is only aplicable on ISA v3.1 +* This test is only applicable on ISA v3.1 */ SKIP_IF (check_pvr_for_sampling_tests ());SKIP_IF (!have_hwcap2 (PPC_FEATURE2_ARCH_3_1 ));
tools/testing/selftests/powerpc/pmu/sampling_tests/mmcra_bhrb_disable_test.c +1 -1
@@ -26,7 +26,7 @@ static int mmcra_bhrb_disable_test(void)/* * Check for platform support for the test. -* This test is only aplicable on ISA v3.1 +* This test is only applicable on ISA v3.1 */ SKIP_IF (check_pvr_for_sampling_tests ());SKIP_IF (!have_hwcap2 (PPC_FEATURE2_ARCH_3_1 ));
tools/testing/selftests/powerpc/pmu/sampling_tests/mmcra_bhrb_ind_call_test.c +1 -1
@@ -29,7 +29,7 @@ static int mmcra_bhrb_ind_call_test(void)/* * Check for platform support for the test. -* This test is only aplicable on ISA v3.1 +* This test is only applicable on ISA v3.1 */ SKIP_IF (check_pvr_for_sampling_tests ());SKIP_IF (!have_hwcap2 (PPC_FEATURE2_ARCH_3_1 ));
tools/testing/selftests/powerpc/ptrace/ptrace-pkey.c +1 -1
@@ -73,7 +73,7 @@ static int child(struct shared_info *info) info->amr2 |=3ul <<pkeyshift (pkey2);/* * invalid amr value where we try to force write -* things which are deined by a uamor setting. +* things which are denied by a uamor setting. */ info->invalid_amr = info->amr2 | (~0x0UL & ~info->expected_uamor);
tools/testing/selftests/powerpc/tm/tm-signal-msr-resv.c +1 -1
@@ -42,7 +42,7 @@ void signal_usr1(int signum, siginfo_t *info, void *uc)#else ucp->uc_mcontext.uc_regs->gregs[PT_MSR ] |= (7ULL );#endif -/* Should segv on return becuase of invalid context */ +/* Should segv on return because of invalid context */ segv_expected =1 ; }
tools/testing/selftests/powerpc/tm/tm-signal-stack.c +2 -2
@@ -2,7 +2,7 @@/* * Copyright 2015, Michael Neuling, IBM Corp. * -* Test the kernel's signal delievery code to ensure that we don't +* Test the kernel's signal delivery code to ensure that we don't * trelaim twice in the kernel signal delivery code. This can happen * if we trigger a signal when in a transaction and the stack pointer * is bogus.
@@ -52,7 +52,7 @@ int tm_signal_stack()/* * The flow here is: -* 1) register a signal handler (so signal delievery occurs) +* 1) register a signal handler (so signal delivery occurs) * 2) make stack pointer (r1) = NULL * 3) start transaction * 4) cause segv
tools/testing/selftests/powerpc/tm/tm-sigreturn.c +1 -1
@@ -5,7 +5,7 @@* * Test the kernel's signal returning code to check reclaim is done if the * sigreturn() is called while in a transaction (suspended since active is -* already dropped trough the system call path). +* already dropped through the system call path). * * The kernel must discard the transaction when entering sigreturn, since * restoring the potential TM SPRS from the signal frame is requiring to not be
tools/testing/selftests/powerpc/tm/tm-tar.c +1 -1
@@ -50,7 +50,7 @@ int test_tar(void)"bne 2b;" "tend.;" -/* Transaction sucess! TAR should be 3 */ +/* Transaction success! TAR should be 3 */ "mfspr 7, %[tar];" "ori %[res], 7, 4;" // res = 3|4 = 7 "b 4f;"
tools/testing/selftests/powerpc/tm/tm-tmspr.c +1 -1
@@ -9,7 +9,7 @@* - TFIAR - stores address of location of transaction failure * - TFHAR - stores address of software failure handler (if transaction * fails) -* - TEXASR - lots of info about the transacion(s) +* - TEXASR - lots of info about the transaction(s) * * (1) create more threads than cpus * (2) in each thread:
tools/testing/selftests/powerpc/tm/tm-trap.c +2 -2
@@ -91,9 +91,9 @@ void trap_signal_handler(int signo, siginfo_t *si, void *uc)* LE endianness does in effect nothing, instruction (2) * is then executed again as 'trap', generating a second * trap event (note that in that case 'trap' is caught -* not in transacional mode). On te other hand, if after +* not in transactional mode). On te other hand, if after * the return from the signal handler the endianness in- -* advertently flipped, instruction (1) is tread as a +* advertently flipped, instruction (1) is thread as a * branch instruction, i.e. b .+8, hence instruction (3) * and (4) are executed (tbegin.; trap;) and we get sim- * ilaly on the trap signal handler, but now in TM mode.
Signature · 1 line
2.43.0