Skip to contentSkip to conversation

HID: logitech: Add ids for G PRO 2 LIGHTSPEED

PATCH Applied Matt Coffin 3 participants 3 messages Aug 20, 2025

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 HID: logitech: Add ids for G PRO 2 LIGHTSPEED

Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver or directly. This nano receiver appears to work identically to the 1_1 receiver for the case I've verified, which is the battery status through lg-hidpp.

The same appears to be the case wired, sharing much with the Pro X Superlight 2; differences seemed to lie in userland configuration rather than in interfaces used by hid_logitech_hidpp on the kernel side.

I verified the sysfs interface for battery charge/discharge status, and capacity read to be working on my 910-007290 device (white).

---
 drivers/hid/hid-ids.h            | 1 +
 drivers/hid/hid-logitech-dj.c    | 4 ++++
 drivers/hid/hid-logitech-hidpp.c | 2 ++
 3 files changed, 7 insertions(+)
drivers/hid/hid-ids.h +1 -0
index 5a1096283855..37dc42380373 100644
@@ -907,6 +907,7 @@
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2		0xc534
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1	0xc539
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1	0xc53f
+#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2	0xc543
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY	0xc53a
 #define USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER	0xc548
 #define USB_DEVICE_ID_SPACETRAVELLER	0xc623
drivers/hid/hid-logitech-dj.c +4 -0
index 34fa71ceec2b..cce54dd9884a 100644
@@ -1983,6 +1983,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
 	 .driver_data = recvr_type_gaming_hidpp},
+	{ /* Logitech lightspeed receiver (0xc543) */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2),
+	 .driver_data = recvr_type_gaming_hidpp},
 
 	{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
drivers/hid/hid-logitech-hidpp.c +2 -0
index 10a3bc5f931b..aaef405a717e 100644
@@ -4596,6 +4596,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },
 	{ /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },
+	{ /* Logitech G PRO 2 LIGHTSPEED Wireless Mouse over USB */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xc09a) },
 
 	{ /* G935 Gaming Headset */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),
Signature · 1 line
2.50.1
reviewer Reviewed-by on v1 1/1
#1 lore raw
Quoted 1 line · Matt Coffin

Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver

"its"

Quoted 4 lines

or directly. This nano receiver appears to work identically to the 1_1 receiver for the case I've verified, which is the battery status through lg-hidpp.

Quoted 8 lines

The same appears to be the case wired, sharing much with the Pro X Superlight 2; differences seemed to lie in userland configuration rather than in interfaces used by hid_logitech_hidpp on the kernel side.

I verified the sysfs interface for battery charge/discharge status, and capacity read to be working on my 910-007290 device (white).

Otherwise LGTM

Quoted 56 lines

---
 drivers/hid/hid-ids.h            | 1 +
 drivers/hid/hid-logitech-dj.c    | 4 ++++
 drivers/hid/hid-logitech-hidpp.c | 2 ++

 3 files changed, 7 insertions(+)
drivers/hid/hid-ids.h +0 -0
index 5a1096283855..37dc42380373 100644
@@ -907,6 +907,7 @@
  #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2		0xc534
  #define

USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1 0xc539
 #define
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1 0xc53f
+#define
USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2 0xc543
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY 0xc53a
 #define USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER 0xc548
 #define USB_DEVICE_ID_SPACETRAVELLER 0xc623

drivers/hid/hid- renamed from drivers/hid/hid-logitech-dj.c +0 -0

logitech-dj.c
index 34fa71ceec2b..cce54dd9884a 100644

drivers/hid/hid-logitech-dj.c +4 -0
@@ -1983,6 +1983,10 @@ static const struct hid_device_id
 logi_dj_receivers[] = {
  	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
  		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1)
 ,
  	 .driver_data = recvr_type_gaming_hidpp},
+	{ /* Logitech lightspeed receiver (0xc543) */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2)
 ,
+	 .driver_data = recvr_type_gaming_hidpp},


  { /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),

drivers/hid/hid- renamed from drivers/hid/hid-logitech-hidpp.c +0 -0

logitech-hidpp.c
index 10a3bc5f931b..aaef405a717e 100644

drivers/hid/hid-logitech-hidpp.c +0 -0
@@ -4596,6 +4596,8 @@ static const struct hid_device_id
 hidpp_devices[] = {
  	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },

  { /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },

drivers/hid/hid-logitech-hidpp.c +2 -0
+	{ /* Logitech G PRO 2 LIGHTSPEED Wireless Mouse over USB */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xc09a) },


  { /* G935 Gaming Headset */ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),

maintainer Applied
#2 lore raw
In reply to Matt Coffin
Quoted 51 lines · Matt Coffin

Adds support for the G PRO 2 LIGHTSPEED Wireless via it's nano receiver or directly. This nano receiver appears to work identically to the 1_1 receiver for the case I've verified, which is the battery status through lg-hidpp.

The same appears to be the case wired, sharing much with the Pro X Superlight 2; differences seemed to lie in userland configuration rather than in interfaces used by hid_logitech_hidpp on the kernel side.

I verified the sysfs interface for battery charge/discharge status, and capacity read to be working on my 910-007290 device (white).

---
 drivers/hid/hid-ids.h            | 1 +
 drivers/hid/hid-logitech-dj.c    | 4 ++++
 drivers/hid/hid-logitech-hidpp.c | 2 ++
 3 files changed, 7 insertions(+)
drivers/hid/hid-ids.h +1 -0
index 5a1096283855..37dc42380373 100644
@@ -907,6 +907,7 @@
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_2		0xc534
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1	0xc539
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1	0xc53f
+#define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2	0xc543
 #define USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_POWERPLAY	0xc53a
 #define USB_DEVICE_ID_LOGITECH_BOLT_RECEIVER	0xc548
 #define USB_DEVICE_ID_SPACETRAVELLER	0xc623
drivers/hid/hid-logitech-dj.c +4 -0
index 34fa71ceec2b..cce54dd9884a 100644
@@ -1983,6 +1983,10 @@ static const struct hid_device_id logi_dj_receivers[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
 		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_1),
 	 .driver_data = recvr_type_gaming_hidpp},
+	{ /* Logitech lightspeed receiver (0xc543) */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH,
+		USB_DEVICE_ID_LOGITECH_NANO_RECEIVER_LIGHTSPEED_1_2),
+	 .driver_data = recvr_type_gaming_hidpp},
 
 	{ /* Logitech 27 MHz HID++ 1.0 receiver (0xc513) */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
drivers/hid/hid-logitech-hidpp.c +0 -0
index 10a3bc5f931b..aaef405a717e 100644

drivers/hid/hid-logitech-hidpp.c static const struct hid_device_id hidpp_devices[] = { · line 4603

Quoted 8 lines
drivers/hid/hid-logitech-hidpp.c +2 -0
@@ -4596,6 +4596,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },
 	{ /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },
+	{ /* Logitech G PRO 2 LIGHTSPEED Wireless Mouse over USB */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xc09a) },
 
 	{ /* G935 Gaming Headset */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),

Applied to hid.git#for-6.17/upstream-fixes, thanks.

Signature · 2 lines
Jiri Kosina
SUSE Labs