Skip to contentSkip to conversation

FAILED: patch "[PATCH] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board" failed to apply to 6.6-stable tree

PATCH [email protected] 1 participant 1 message Aug 21, 2025

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x a0b8da04153eb61cc2eaeeea5cc404e91e557f6b
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025082104-stilt-flick-296a@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a0b8da04153eb61cc2eaeeea5cc404e91e557f6b Mon Sep 17 00:00:00 2001
From: Judith Mendez <[email protected]>
Date: Mon, 7 Jul 2025 14:08:30 -0500
Subject: [PATCH] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board
file

This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common to each top level board file. This is needed since we require internal pullups for AM62x SK and not for AM62 LP SK since it has external pullups on DATA 1-7.

Internal pulls are required for AM62 SK as per JESD84 spec recommendation to prevent unconnected lines floating.

Fixes d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals")
arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +24 -0
index aafdb90c0eb7..4609f366006e 100644
@@ -74,6 +74,22 @@ vddshv_sdio: regulator-4 {
 };
 
 &main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */
+		>;
+	};
+
 	vddshv_sdio_pins_default: vddshv-sdio-default-pins {
 		pinctrl-single,pins = <
 			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */
@@ -144,6 +160,14 @@ exp2: gpio@23 {
 	};
 };
 
+&sdhci0 {
+	bootph-all;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	status = "okay";
+};
+
 &sdhci1 {
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vddshv_sdio>;
arch/arm64/boot/dts/ti/k3-am625-sk.dts +24 -0
index 2fbfa3719345..d240165bda9c 100644
@@ -106,6 +106,22 @@ vcc_1v8: regulator-5 {
 };
 
 &main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
 	main_rgmii2_pins_default: main-rgmii2-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -195,6 +211,14 @@ exp1: gpio@22 {
 	};
 };
 
+&sdhci0 {
+	bootph-all;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	status = "okay";
+};
+
 &sdhci1 {
 	vmmc-supply = <&vdd_mmc1>;
 	vqmmc-supply = <&vdd_sd_dv>;
arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +0 -24
index ee8337bfbbfd..13e1d36123d5 100644
@@ -203,22 +203,6 @@ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */
 		>;
 	};
 
-	main_mmc0_pins_default: main-mmc0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */
-			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */
-			AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */
-			AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */
-			AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */
-			AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */
-			AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */
-			AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */
-			AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */
-		>;
-	};
-
 	main_mmc1_pins_default: main-mmc1-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -457,14 +441,6 @@ &main_i2c2 {
 	clock-frequency = <400000>;
 };
 
-&sdhci0 {
-	bootph-all;
-	status = "okay";
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc0_pins_default>;
-};
-
 &sdhci1 {
 	/* SD/MMC */
 	bootph-all;