Skip to contentSkip to conversation

FAILED: patch "[PATCH] soc: qcom: mdt_loader: Ensure we don't read past the ELF" failed to apply to 6.1-stable tree

PATCH New [email protected] 2 participants 3 messages Aug 21, 2025 – Aug 22, 2025

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 9f9967fed9d066ed3dae9372b45ffa4f6fccfeef
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025082135-dividable-grandma-3c11@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 9f9967fed9d066ed3dae9372b45ffa4f6fccfeef Mon Sep 17 00:00:00 2001
From: Bjorn Andersson <[email protected]>
Date: Tue, 10 Jun 2025 21:58:28 -0500
Subject: [PATCH] soc: qcom: mdt_loader: Ensure we don't read past the ELF
header

When the MDT loader is used in remoteproc, the ELF header is sanitized beforehand, but that's not necessary the case for other clients.

Validate the size of the firmware buffer to ensure that we don't read past the end as we iterate over the header. e_phentsize and e_shentsize are validated as well, to ensure that the assumptions about step size in the traversal are valid.

drivers/soc/qcom/mdt_loader.c +43 -0
index b2c0fb55d4ae..b2c9731b6f2a 100644
@@ -18,6 +18,37 @@
 #include <linux/slab.h>
 #include <linux/soc/qcom/mdt_loader.h>
 
+static bool mdt_header_valid(const struct firmware *fw)
+{
+	const struct elf32_hdr *ehdr;
+	size_t phend;
+	size_t shend;
+
+	if (fw->size < sizeof(*ehdr))
+		return false;
+
+	ehdr = (struct elf32_hdr *)fw->data;
+
+	if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG))
+		return false;
+
+	if (ehdr->e_phentsize != sizeof(struct elf32_phdr))
+		return -EINVAL;
+
+	phend = size_add(size_mul(sizeof(struct elf32_phdr), ehdr->e_phnum), ehdr->e_phoff);
+	if (phend > fw->size)
+		return false;
+
+	if (ehdr->e_shentsize != sizeof(struct elf32_shdr))
+		return -EINVAL;
+
+	shend = size_add(size_mul(sizeof(struct elf32_shdr), ehdr->e_shnum), ehdr->e_shoff);
+	if (shend > fw->size)
+		return false;
+
+	return true;
+}
+
 static bool mdt_phdr_valid(const struct elf32_phdr *phdr)
 {
 	if (phdr->p_type != PT_LOAD)
@@ -82,6 +113,9 @@ ssize_t qcom_mdt_get_size(const struct firmware *fw)
 	phys_addr_t max_addr = 0;
 	int i;
 
+	if (!mdt_header_valid(fw))
+		return -EINVAL;
+
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
@@ -134,6 +168,9 @@ void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len,
 	ssize_t ret;
 	void *data;
 
+	if (!mdt_header_valid(fw))
+		return ERR_PTR(-EINVAL);
+
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
@@ -214,6 +251,9 @@ int qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
 	int ret;
 	int i;
 
+	if (!mdt_header_valid(fw))
+		return -EINVAL;
+
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
@@ -310,6 +350,9 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 	if (!fw || !mem_region || !mem_phys || !mem_size)
 		return -EINVAL;
 
+	if (!mdt_header_valid(fw))
+		return -EINVAL;
+
 	is_split = qcom_mdt_bins_are_split(fw, fw_name);
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
maintainer
#1 lore raw

PATCH 1/2 soc: qcom: mdt_loader: Enhance split binary detection

From: Gokul krishna Krishnakumar <[email protected]>

[ Upstream commit 210d12c8197a551caa2979be421aa42381156aec ]

It may be that the offset of the first program header lies inside the mdt's filesize, in this case the loader would incorrectly assume that the bins were not split and in this scenario the firmware authentication fails. This change updates the logic used by the mdt loader to understand whether the firmware images are split or not. It figures this out by checking if each programs header's segment lies within the file or not.

Stable-dep-of: 9f9967fed9d0 ("soc: qcom: mdt_loader: Ensure we don't read past the ELF header")

---
 drivers/soc/qcom/mdt_loader.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)
drivers/soc/qcom/mdt_loader.c +23 -2
index 10235b36d131..c075d38f38fe 100644
@@ -264,6 +264,26 @@ int qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
 }
 EXPORT_SYMBOL_GPL(qcom_mdt_pas_init);
 
+static bool qcom_mdt_bins_are_split(const struct firmware *fw, const char *fw_name)
+{
+	const struct elf32_phdr *phdrs;
+	const struct elf32_hdr *ehdr;
+	uint64_t seg_start, seg_end;
+	int i;
+
+	ehdr = (struct elf32_hdr *)fw->data;
+	phdrs = (struct elf32_phdr *)(ehdr + 1);
+
+	for (i = 0; i < ehdr->e_phnum; i++) {
+		seg_start = phdrs[i].p_offset;
+		seg_end = phdrs[i].p_offset + phdrs[i].p_filesz;
+		if (seg_start > fw->size || seg_end > fw->size)
+			return true;
+	}
+
+	return false;
+}
+
 static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 			   const char *fw_name, int pas_id, void *mem_region,
 			   phys_addr_t mem_phys, size_t mem_size,
@@ -276,6 +296,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 	phys_addr_t min_addr = PHYS_ADDR_MAX;
 	ssize_t offset;
 	bool relocate = false;
+	bool is_split;
 	void *ptr;
 	int ret = 0;
 	int i;
@@ -283,6 +304,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 	if (!fw || !mem_region || !mem_phys || !mem_size)
 		return -EINVAL;
 
+	is_split = qcom_mdt_bins_are_split(fw, fw_name);
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
@@ -336,8 +358,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 
 		ptr = mem_region + offset;
 
-		if (phdr->p_filesz && phdr->p_offset < fw->size &&
-		    phdr->p_offset + phdr->p_filesz <= fw->size) {
+		if (phdr->p_filesz && !is_split) {
 			/* Firmware is large enough to be non-split */
 			if (phdr->p_offset + phdr->p_filesz > fw->size) {
 				dev_err(dev, "file %s segment %d would be truncated\n",
Signature · 1 line
2.50.1
maintainer
#2 lore raw

PATCH 2/2 soc: qcom: mdt_loader: Ensure we don't read past the ELF header

From: Bjorn Andersson <[email protected]>

[ Upstream commit 9f9967fed9d066ed3dae9372b45ffa4f6fccfeef ]

When the MDT loader is used in remoteproc, the ELF header is sanitized beforehand, but that's not necessary the case for other clients.

Validate the size of the firmware buffer to ensure that we don't read past the end as we iterate over the header. e_phentsize and e_shentsize are validated as well, to ensure that the assumptions about step size in the traversal are valid.

---
 drivers/soc/qcom/mdt_loader.c | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)
drivers/soc/qcom/mdt_loader.c +43 -0
index c075d38f38fe..fc6fdcd0a5d4 100644
@@ -17,6 +17,37 @@
 #include <linux/slab.h>
 #include <linux/soc/qcom/mdt_loader.h>
 
+static bool mdt_header_valid(const struct firmware *fw)
+{
+	const struct elf32_hdr *ehdr;
+	size_t phend;
+	size_t shend;
+
+	if (fw->size < sizeof(*ehdr))
+		return false;
+
+	ehdr = (struct elf32_hdr *)fw->data;
+
+	if (memcmp(ehdr->e_ident, ELFMAG, SELFMAG))
+		return false;
+
+	if (ehdr->e_phentsize != sizeof(struct elf32_phdr))
+		return -EINVAL;
+
+	phend = size_add(size_mul(sizeof(struct elf32_phdr), ehdr->e_phnum), ehdr->e_phoff);
+	if (phend > fw->size)
+		return false;
+
+	if (ehdr->e_shentsize != sizeof(struct elf32_shdr))
+		return -EINVAL;
+
+	shend = size_add(size_mul(sizeof(struct elf32_shdr), ehdr->e_shnum), ehdr->e_shoff);
+	if (shend > fw->size)
+		return false;
+
+	return true;
+}
+
 static bool mdt_phdr_valid(const struct elf32_phdr *phdr)
 {
 	if (phdr->p_type != PT_LOAD)
@@ -84,6 +115,9 @@ ssize_t qcom_mdt_get_size(const struct firmware *fw)
 	phys_addr_t max_addr = 0;
 	int i;
 
+	if (!mdt_header_valid(fw))
+		return -EINVAL;
+
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
@@ -136,6 +170,9 @@ void *qcom_mdt_read_metadata(const struct firmware *fw, size_t *data_len,
 	ssize_t ret;
 	void *data;
 
+	if (!mdt_header_valid(fw))
+		return ERR_PTR(-EINVAL);
+
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
@@ -216,6 +253,9 @@ int qcom_mdt_pas_init(struct device *dev, const struct firmware *fw,
 	int ret;
 	int i;
 
+	if (!mdt_header_valid(fw))
+		return -EINVAL;
+
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
 
@@ -304,6 +344,9 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw,
 	if (!fw || !mem_region || !mem_phys || !mem_size)
 		return -EINVAL;
 
+	if (!mdt_header_valid(fw))
+		return -EINVAL;
+
 	is_split = qcom_mdt_bins_are_split(fw, fw_name);
 	ehdr = (struct elf32_hdr *)fw->data;
 	phdrs = (struct elf32_phdr *)(ehdr + 1);
Signature · 1 line
2.50.1