Skip to contentSkip to conversation

FAILED: patch "[PATCH] PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features" failed to apply to 6.12-stable tree

PATCH New [email protected] 2 participants 3 messages Aug 21, 2025 – Aug 22, 2025

Subsystems (5)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x c523fa63ac1d452abeeb4e699560ec3365037f32
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025082145-scrap-ride-31b5@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From c523fa63ac1d452abeeb4e699560ec3365037f32 Mon Sep 17 00:00:00 2001
From: Richard Zhu <[email protected]>
Date: Tue, 8 Jul 2025 17:10:02 +0800
Subject: [PATCH] PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features

IMX8MQ_EP has three 64-bit BAR0/2/4 capable and programmable BARs. For IMX8MQ_EP, use imx8q_pcie_epc_features (64-bit BARs 0, 2, 4) instead of imx8m_pcie_epc_features (64-bit BARs 0, 2).

Fixes 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
[bhelgaas: add details in subject]
drivers/pci/controller/dwc/pci-imx6.c +1 -1
index 5a38cfaf989b..7d15bcb7c107 100644
@@ -1912,7 +1912,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
 		.mode_off[1] = IOMUXC_GPR12,
 		.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
-		.epc_features = &imx8m_pcie_epc_features,
+		.epc_features = &imx8q_pcie_epc_features,
 		.init_phy = imx8mq_pcie_init_phy,
 		.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
 	},
maintainer
#1 lore raw

PATCH 1/2 PCI: imx6: Add i.MX8Q PCIe Endpoint (EP) support

From: Frank Li <[email protected]>

[ Upstream commit 687aedb73a401addf151c5f60e481e574b4c9ad9 ]

Add support for the i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe Endpoint (EP). On the i.MX8Q platforms, the PCI bus addresses differ from the CPU addresses. However, the DesignWare (DWC) driver already handles this in the common code.

Stable-dep-of: c523fa63ac1d ("PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features")

---
 drivers/pci/controller/dwc/pci-imx6.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
drivers/pci/controller/dwc/pci-imx6.c +20 -0
index 3b24fed3177d..70f281abb607 100644
@@ -72,6 +72,7 @@ enum imx_pcie_variants {
 	IMX8MQ_EP,
 	IMX8MM_EP,
 	IMX8MP_EP,
+	IMX8Q_EP,
 	IMX95_EP,
 };
 
@@ -1100,6 +1101,16 @@ static const struct pci_epc_features imx8m_pcie_epc_features = {
 	.align = SZ_64K,
 };
 
+static const struct pci_epc_features imx8q_pcie_epc_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = false,
+	.bar[BAR_1] = { .type = BAR_RESERVED, },
+	.bar[BAR_3] = { .type = BAR_RESERVED, },
+	.bar[BAR_5] = { .type = BAR_RESERVED, },
+	.align = SZ_64K,
+};
+
 /*
  * BAR#	| Default BAR enable	| Default BAR Type	| Default BAR Size	| BAR Sizing Scheme
  * ================================================================================================
@@ -1695,6 +1706,14 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.epc_features = &imx8m_pcie_epc_features,
 		.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
 	},
+	[IMX8Q_EP] = {
+		.variant = IMX8Q_EP,
+		.flags = IMX_PCIE_FLAG_HAS_PHYDRV,
+		.mode = DW_PCIE_EP_TYPE,
+		.epc_features = &imx8q_pcie_epc_features,
+		.clk_names = imx8q_clks,
+		.clks_cnt = ARRAY_SIZE(imx8q_clks),
+	},
 	[IMX95_EP] = {
 		.variant = IMX95_EP,
 		.flags = IMX_PCIE_FLAG_HAS_SERDES |
@@ -1724,6 +1743,7 @@ static const struct of_device_id imx_pcie_of_match[] = {
 	{ .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], },
 	{ .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], },
 	{ .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], },
+	{ .compatible = "fsl,imx8q-pcie-ep", .data = &drvdata[IMX8Q_EP], },
 	{ .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], },
 	{},
 };
Signature · 1 line
2.50.1
maintainer
#2 lore raw

PATCH 2/2 PCI: imx6: Add IMX8MQ_EP third 64-bit BAR in epc_features

From: Richard Zhu <[email protected]>

[ Upstream commit c523fa63ac1d452abeeb4e699560ec3365037f32 ]

IMX8MQ_EP has three 64-bit BAR0/2/4 capable and programmable BARs. For IMX8MQ_EP, use imx8q_pcie_epc_features (64-bit BARs 0, 2, 4) instead of imx8m_pcie_epc_features (64-bit BARs 0, 2).

Fixes 75c2f26da03f ("PCI: imx6: Add i.MX PCIe EP mode support")
[bhelgaas: add details in subject]
---
 drivers/pci/controller/dwc/pci-imx6.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/dwc/pci-imx6.c +1 -1
index 70f281abb607..7b05eb8f95d0 100644
@@ -1676,7 +1676,7 @@ static const struct imx_pcie_drvdata drvdata[] = {
 		.mode_mask[0] = IMX6Q_GPR12_DEVICE_TYPE,
 		.mode_off[1] = IOMUXC_GPR12,
 		.mode_mask[1] = IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE,
-		.epc_features = &imx8m_pcie_epc_features,
+		.epc_features = &imx8q_pcie_epc_features,
 		.init_phy = imx8mq_pcie_init_phy,
 		.enable_ref_clk = imx8mm_pcie_enable_ref_clk,
 	},
Signature · 1 line
2.50.1