FAILED: patch "[PATCH] netfs: Fix unbuffered write error handling" failed to apply to 6.12-stable tree
Subsystems (5)
[email protected]
maintainerThe patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x a3de58b12ce074ec05b8741fa28d62ccb1070468
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025082157-dedicator-hurled-4d65@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a3de58b12ce074ec05b8741fa28d62ccb1070468 Mon Sep 17 00:00:00 2001
From: David Howells <[email protected]>
Date: Thu, 14 Aug 2025 22:45:50 +0100
Subject: [PATCH] netfs: Fix unbuffered write error handling
If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520
do_splice+0x197/0x4e0or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282)
iter_file_splice_write (fs/splice.c:755)Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to.
fs/netfs/read_collect.c +3 -1
@@ -281,8 +281,10 @@ static void netfs_collect_read_results(struct netfs_io_request *rreq) }else if (test_bit (NETFS_RREQ_SHORT_TRANSFER , &rreq->flags)) { notes |=MADE_PROGRESS ; }else { -if (!stream->failed) +if (!stream->failed) { stream->transferred += transferred; + stream->transferred_valid = true; + }if (front->transferred < front->len)set_bit (NETFS_RREQ_SHORT_TRANSFER , &rreq->flags); notes |=MADE_PROGRESS ;
fs/netfs/write_collect.c +8 -2
@@ -254,6 +254,7 @@ static void netfs_collect_write_results(struct netfs_io_request *wreq)if (front->start + front->transferred > stream->collected_to) { stream->collected_to = front->start + front->transferred; stream->transferred = stream->collected_to - wreq->start; + stream->transferred_valid = true; notes |=MADE_PROGRESS ; }if (test_bit (NETFS_SREQ_FAILED , &front->flags)) {
@@ -356,6 +357,7 @@ bool netfs_write_collection(struct netfs_io_request *wreq) {struct netfs_inode *ictx =netfs_inode (wreq->inode);size_t transferred; +bool transferred_valid = false;int s;_enter ("R=%x" , wreq->debug_id);
@@ -376,12 +378,16 @@ bool netfs_write_collection(struct netfs_io_request *wreq)continue ;if (!list_empty (&stream->subrequests))return false; -if (stream->transferred < transferred) +if (stream->transferred_valid && + stream->transferred < transferred) { transferred = stream->transferred; + transferred_valid = true; + } }/* Okay, declare that all I/O is complete. */ - wreq->transferred = transferred; +if (transferred_valid) + wreq->transferred = transferred;trace_netfs_rreq (wreq, netfs_rreq_trace_write_done); if (wreq->io_streams[1].active &&
fs/netfs/write_issue.c +2 -2
@@ -118,12 +118,12 @@ struct netfs_io_request *netfs_create_write_req(struct address_space *mapping, wreq->io_streams[0 ].prepare_write = ictx->ops->prepare_write; wreq->io_streams[0 ].issue_write = ictx->ops->issue_write; wreq->io_streams[0 ].collected_to = start; - wreq->io_streams[0 ].transferred =LONG_MAX ; + wreq->io_streams[0 ].transferred =0 ; wreq->io_streams[1 ].stream_nr =1 ; wreq->io_streams[1 ].source =NETFS_WRITE_TO_CACHE ; wreq->io_streams[1 ].collected_to = start; - wreq->io_streams[1 ].transferred =LONG_MAX ; + wreq->io_streams[1 ].transferred =0 ;if (fscache_resources_valid (&wreq->cache_resources)) { wreq->io_streams[1 ].avail = true; wreq->io_streams[1 ].active = true;
fs/splice.c +3 -0
@@ -739,6 +739,9 @@ iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out, sd.pos = kiocb.ki_pos;if (ret <=0 )break ; +WARN_ONCE (ret > sd.total_len - left, +"Splice Exceeded! ret=%zd tot=%zu left=%zu\n" , + ret, sd.total_len, left); sd.num_spliced += ret; sd.total_len -= ret;
include/linux/netfs.h +1 -0
@@ -150,6 +150,7 @@ struct netfs_io_stream {bool active;/* T if stream is active */ bool need_retry;/* T if this stream needs retrying */ bool failed;/* T if this stream failed */ +bool transferred_valid;/* T is ->transferred is valid */ };/*
Sasha Levin
maintainerPATCH 1/1 netfs: Fix unbuffered write error handling
From: David Howells <[email protected]>
[ Upstream commit a3de58b12ce074ec05b8741fa28d62ccb1070468 ]
If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520
do_splice+0x197/0x4e0or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282)
iter_file_splice_write (fs/splice.c:755)Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to.
--- fs/netfs/write_collect.c | 10 ++++++++-- fs/netfs/write_issue.c | 4 ++-- fs/splice.c | 3 +++ include/linux/netfs.h | 1 + 4 files changed, 14 insertions(+), 4 deletions(-)
fs/netfs/write_collect.c +8 -2
@@ -433,6 +433,7 @@ static void netfs_collect_write_results(struct netfs_io_request *wreq)if (front->start + front->transferred > stream->collected_to) { stream->collected_to = front->start + front->transferred; stream->transferred = stream->collected_to - wreq->start; + stream->transferred_valid = true; notes |=MADE_PROGRESS ; }if (test_bit (NETFS_SREQ_FAILED , &front->flags)) {
@@ -538,6 +539,7 @@ void netfs_write_collection_worker(struct work_struct *work) struct netfs_io_request *wreq = container_of(work, struct netfs_io_request, work);struct netfs_inode *ictx =netfs_inode (wreq->inode);size_t transferred; +bool transferred_valid = false;int s;_enter ("R=%x" , wreq->debug_id);
@@ -568,12 +570,16 @@ void netfs_write_collection_worker(struct work_struct *work)netfs_put_request (wreq, false, netfs_rreq_trace_put_work);return ; } -if (stream->transferred < transferred) +if (stream->transferred_valid && + stream->transferred < transferred) { transferred = stream->transferred; + transferred_valid = true; + } }/* Okay, declare that all I/O is complete. */ - wreq->transferred = transferred; +if (transferred_valid) + wreq->transferred = transferred;trace_netfs_rreq (wreq, netfs_rreq_trace_write_done); if (wreq->io_streams[1].active &&
fs/netfs/write_issue.c +2 -2
@@ -115,12 +115,12 @@ struct netfs_io_request *netfs_create_write_req(struct address_space *mapping, wreq->io_streams[0 ].prepare_write = ictx->ops->prepare_write; wreq->io_streams[0 ].issue_write = ictx->ops->issue_write; wreq->io_streams[0 ].collected_to = start; - wreq->io_streams[0 ].transferred =LONG_MAX ; + wreq->io_streams[0 ].transferred =0 ; wreq->io_streams[1 ].stream_nr =1 ; wreq->io_streams[1 ].source =NETFS_WRITE_TO_CACHE ; wreq->io_streams[1 ].collected_to = start; - wreq->io_streams[1 ].transferred =LONG_MAX ; + wreq->io_streams[1 ].transferred =0 ;if (fscache_resources_valid (&wreq->cache_resources)) { wreq->io_streams[1 ].avail = true; wreq->io_streams[1 ].active = true;
fs/splice.c +3 -0
@@ -744,6 +744,9 @@ iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out, sd.pos = kiocb.ki_pos;if (ret <=0 )break ; +WARN_ONCE (ret > sd.total_len - left, +"Splice Exceeded! ret=%zd tot=%zu left=%zu\n" , + ret, sd.total_len, left); sd.num_spliced += ret; sd.total_len -= ret;
include/linux/netfs.h +1 -0
@@ -150,6 +150,7 @@ struct netfs_io_stream {bool active;/* T if stream is active */ bool need_retry;/* T if this stream needs retrying */ bool failed;/* T if this stream failed */ +bool transferred_valid;/* T is ->transferred is valid */ };/*
Signature · 1 line
2.50.1
Patch "netfs: Fix unbuffered write error handling" has been added to the 6.12-stable tree
This is a note to let you know that I've just added the patch titled
netfs: Fix unbuffered write error handling
to the 6.12-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
netfs-fix-unbuffered-write-error-handling.patch
and it can be found in the queue-6.12 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
From [email protected] Fri Aug 22 05:09:26 2025
From: Sasha Levin <[email protected]>
Date: Thu, 21 Aug 2025 23:08:00 -0400
Subject: netfs: Fix unbuffered write error handling
To: [email protected]
Cc: David Howells <[email protected]>, Xiaoli Feng <[email protected]>, Paulo Alcantara <[email protected]>, Steve French <[email protected]>, Shyam Prasad N <[email protected]>, [email protected], [email protected], [email protected], Christian Brauner <[email protected]>, Sasha Levin <[email protected]>
Message-ID: <[email protected]>
From: David Howells <[email protected]>
[ Upstream commit a3de58b12ce074ec05b8741fa28d62ccb1070468 ]
If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter().
LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them.
Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero.
This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed:
CIFS: VFS: Send error in write = -28
followed by:
BUG: kernel NULL pointer dereference, address: 0000000000000008
with:
RIP: 0010:iter_file_splice_write+0x3a4/0x520
do_splice+0x197/0x4e0or:
RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282)
iter_file_splice_write (fs/splice.c:755)Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to.
--- fs/netfs/write_collect.c | 10 ++++++++-- fs/netfs/write_issue.c | 4 ++-- fs/splice.c | 3 +++ include/linux/netfs.h | 1 + 4 files changed, 14 insertions(+), 4 deletions(-)
fs/netfs/write_collect.c +8 -2
@@ -433,6 +433,7 @@ reassess_streams:if (front->start + front->transferred > stream->collected_to) { stream->collected_to = front->start + front->transferred; stream->transferred = stream->collected_to - wreq->start; + stream->transferred_valid = true; notes |=MADE_PROGRESS ; }if (test_bit (NETFS_SREQ_FAILED , &front->flags)) {
@@ -538,6 +539,7 @@ void netfs_write_collection_worker(struc struct netfs_io_request *wreq = container_of(work, struct netfs_io_request, work);struct netfs_inode *ictx =netfs_inode (wreq->inode);size_t transferred; +bool transferred_valid = false;int s;_enter ("R=%x" , wreq->debug_id);
@@ -568,12 +570,16 @@ void netfs_write_collection_worker(strucnetfs_put_request (wreq, false, netfs_rreq_trace_put_work);return ; } -if (stream->transferred < transferred) +if (stream->transferred_valid && + stream->transferred < transferred) { transferred = stream->transferred; + transferred_valid = true; + } }/* Okay, declare that all I/O is complete. */ - wreq->transferred = transferred; +if (transferred_valid) + wreq->transferred = transferred;trace_netfs_rreq (wreq, netfs_rreq_trace_write_done); if (wreq->io_streams[1].active &&
fs/netfs/write_issue.c +2 -2
@@ -115,12 +115,12 @@ struct netfs_io_request *netfs_create_wr wreq->io_streams[0 ].prepare_write = ictx->ops->prepare_write; wreq->io_streams[0 ].issue_write = ictx->ops->issue_write; wreq->io_streams[0 ].collected_to = start; - wreq->io_streams[0 ].transferred =LONG_MAX ; + wreq->io_streams[0 ].transferred =0 ; wreq->io_streams[1 ].stream_nr =1 ; wreq->io_streams[1 ].source =NETFS_WRITE_TO_CACHE ; wreq->io_streams[1 ].collected_to = start; - wreq->io_streams[1 ].transferred =LONG_MAX ; + wreq->io_streams[1 ].transferred =0 ;if (fscache_resources_valid (&wreq->cache_resources)) { wreq->io_streams[1 ].avail = true; wreq->io_streams[1 ].active = true;
fs/splice.c +3 -0
@@ -744,6 +744,9 @@ iter_file_splice_write(struct pipe_inode sd.pos = kiocb.ki_pos;if (ret <=0 )break ; +WARN_ONCE (ret > sd.total_len - left, +"Splice Exceeded! ret=%zd tot=%zu left=%zu\n" , + ret, sd.total_len, left); sd.num_spliced += ret; sd.total_len -= ret;
include/linux/netfs.h +1 -0
@@ -150,6 +150,7 @@ struct netfs_io_stream {bool active;/* T if stream is active */ bool need_retry;/* T if this stream needs retrying */ bool failed;/* T if this stream failed */ +bool transferred_valid;/* T is ->transferred is valid */ };/*
Patches currently in stable-queue which might be from [email protected] are
queue-6.12/btrfs-send-use-fallocate-for-hole-punching-with-send-stream-v2.patch queue-6.12/usb-typec-fusb302-cache-pd-rx-state.patch queue-6.12/btrfs-move-transaction-aborts-to-the-error-site-in-add_block_group_free_space.patch queue-6.12/btrfs-send-avoid-path-allocation-for-the-current-inode-when-issuing-commands.patch queue-6.12/btrfs-send-keep-the-current-inode-s-path-cached.patch queue-6.12/btrfs-abort-transaction-on-unexpected-eb-generation-at-btrfs_copy_root.patch queue-6.12/btrfs-always-abort-transaction-on-failure-to-add-block-group-to-free-space-tree.patch queue-6.12/btrfs-zoned-requeue-to-unused-block-group-list-if-zone-finish-failed.patch queue-6.12/btrfs-explicitly-ref-count-block_group-on-new_bgs-list.patch queue-6.12/serial-8250-fix-panic-due-to-pslverr.patch queue-6.12/xfs-fully-decouple-xfs_ibulk-flags-from-xfs_iwalk-flags.patch queue-6.12/btrfs-qgroup-drop-unused-parameter-fs_info-from-__del_qgroup_rb.patch queue-6.12/btrfs-send-make-fs_path_len-inline-and-constify-its-argument.patch queue-6.12/netfs-fix-unbuffered-write-error-handling.patch queue-6.12/usb-typec-use-str_enable_disable-like-helpers.patch queue-6.12/btrfs-send-add-and-use-helper-to-rename-current-inode-when-processing-refs.patch queue-6.12/btrfs-send-only-use-boolean-variables-at-process_recorded_refs.patch queue-6.12/btrfs-qgroup-fix-race-between-quota-disable-and-quota-rescan-ioctl.patch queue-6.12/btrfs-send-factor-out-common-logic-when-sending-xattrs.patch queue-6.12/btrfs-codify-pattern-for-adding-block_group-to-bg_list.patch