Skip to contentSkip to conversation

FAILED: patch "[PATCH] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of" failed to apply to 6.1-stable tree

PATCH New [email protected] 2 participants 4 messages Aug 22, 2025 – Aug 23, 2025

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 340be332e420ed37d15d4169a1b4174e912ad6cb
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025082221-murmuring-commotion-35cb@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 340be332e420ed37d15d4169a1b4174e912ad6cb Mon Sep 17 00:00:00 2001
From: Victor Shih <[email protected]>
Date: Thu, 31 Jul 2025 14:57:52 +0800
Subject: [PATCH] mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of
AER

Due to a flaw in the hardware design, the GL9763e replay timer frequently times out when ASPM is enabled. As a result, the warning messages will often appear in the system log when the system accesses the GL9763e PCI config. Therefore, the replay timer timeout must be masked.

Fixes 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
drivers/mmc/host/sdhci-pci-gli.c +3 -0
index 436f0460222f..3a1de477e9af 100644
@@ -1782,6 +1782,9 @@ static void gl9763e_hw_setting(struct sdhci_pci_slot *slot)
 	value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
 	pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
 
+	/* mask the replay timer timeout of AER */
+	sdhci_gli_mask_replay_timer_timeout(pdev);
+
 	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
 	value &= ~GLI_9763E_VHS_REV;
 	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
maintainer
#1 lore raw

PATCH 1/3 mmc: sdhci-pci-gli: Use PCI AER definitions, not hard-coded values

From: Bjorn Helgaas <[email protected]>

[ Upstream commit 951b7ccc54591ba48755b5e0c7fc8b9623a64640 ]

015c9cbcf0ad ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER") added PCI_GLI_9750_CORRERR_MASK, the offset of the AER Capability in config space, and PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT, the Replay Timer Timeout bit in the AER Correctable Error Status register.

Use pci_find_ext_capability() to locate the AER Capability and use the existing PCI_ERR_COR_REP_TIMER definition to mask the bit.

This removes a little bit of unnecessarily device-specific code and makes AER-related things more greppable.

---
 drivers/mmc/host/sdhci-pci-gli.c | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)
drivers/mmc/host/sdhci-pci-gli.c +2 -10
index 3b5b5c139206..52e716daddbe 100644
@@ -27,8 +27,6 @@
 #define PCI_GLI_9750_PM_CTRL	0xFC
 #define   PCI_GLI_9750_PM_STATE	  GENMASK(1, 0)
 
-#define PCI_GLI_9750_CORRERR_MASK				0x214
-#define   PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT	  BIT(12)
 
 #define SDHCI_GLI_9750_CFG2          0x848
 #define   SDHCI_GLI_9750_CFG2_L1DLY    GENMASK(28, 24)
@@ -154,8 +152,6 @@
 #define PCI_GLI_9755_PM_CTRL     0xFC
 #define   PCI_GLI_9755_PM_STATE    GENMASK(1, 0)
 
-#define PCI_GLI_9755_CORRERR_MASK				0x214
-#define   PCI_GLI_9755_CORRERR_MASK_REPLAY_TIMER_TIMEOUT	  BIT(12)
 
 #define GLI_MAX_TUNING_LOOP 40
 
@@ -501,9 +497,7 @@ static void gl9750_hw_setting(struct sdhci_host *host)
 	pci_write_config_dword(pdev, PCI_GLI_9750_PM_CTRL, value);
 
 	/* mask the replay timer timeout of AER */
-	pci_read_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, &value);
-	value |= PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
-	pci_write_config_dword(pdev, PCI_GLI_9750_CORRERR_MASK, value);
+	sdhci_gli_mask_replay_timer_timeout(pdev);
 
 	gl9750_wt_off(host);
 }
@@ -715,9 +709,7 @@ static void gl9755_hw_setting(struct sdhci_pci_slot *slot)
 	pci_write_config_dword(pdev, PCI_GLI_9755_PM_CTRL, value);
 
 	/* mask the replay timer timeout of AER */
-	pci_read_config_dword(pdev, PCI_GLI_9755_CORRERR_MASK, &value);
-	value |= PCI_GLI_9755_CORRERR_MASK_REPLAY_TIMER_TIMEOUT;
-	pci_write_config_dword(pdev, PCI_GLI_9755_CORRERR_MASK, value);
+	sdhci_gli_mask_replay_timer_timeout(pdev);
 
 	gl9755_wt_off(pdev);
 }
Signature · 1 line
2.50.1
maintainer
#2 lore raw

PATCH 2/3 mmc: sdhci-pci-gli: Add a new function to simplify the code

From: Victor Shih <[email protected]>

[ Upstream commit dec8b38be4b35cae5f7fa086daf2631e2cfa09c1 ]

In preparation to fix replay timer timeout, add sdhci_gli_mask_replay_timer_timeout() function to simplify some of the code, allowing it to be re-used.

Fixes 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")

Stable-dep-of: 340be332e420 ("mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER")

---
 drivers/mmc/host/sdhci-pci-gli.c | 14 ++++++++++++++
 1 file changed, 14 insertions(+)
drivers/mmc/host/sdhci-pci-gli.c +14 -0
index 52e716daddbe..0e19e15ed356 100644
@@ -156,6 +156,20 @@
 #define GLI_MAX_TUNING_LOOP 40
 
 /* Genesys Logic chipset */
+static void sdhci_gli_mask_replay_timer_timeout(struct pci_dev *pdev)
+{
+	int aer;
+	u32 value;
+
+	/* mask the replay timer timeout of AER */
+	aer = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR);
+	if (aer) {
+		pci_read_config_dword(pdev, aer + PCI_ERR_COR_MASK, &value);
+		value |= PCI_ERR_COR_REP_TIMER;
+		pci_write_config_dword(pdev, aer + PCI_ERR_COR_MASK, value);
+	}
+}
+
 static inline void gl9750_wt_on(struct sdhci_host *host)
 {
 	u32 wt_value;
Signature · 1 line
2.50.1
maintainer
#3 lore raw

PATCH 3/3 mmc: sdhci-pci-gli: GL9763e: Mask the replay timer timeout of AER

In reply to Sasha Levin

From: Victor Shih <[email protected]>

[ Upstream commit 340be332e420ed37d15d4169a1b4174e912ad6cb ]

Due to a flaw in the hardware design, the GL9763e replay timer frequently times out when ASPM is enabled. As a result, the warning messages will often appear in the system log when the system accesses the GL9763e PCI config. Therefore, the replay timer timeout must be masked.

Fixes 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
---
 drivers/mmc/host/sdhci-pci-gli.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/mmc/host/sdhci-pci-gli.c +3 -0
index 0e19e15ed356..9b03450166ae 100644
@@ -988,6 +988,9 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
 	value |= FIELD_PREP(GLI_9763E_HS400_RXDLY, GLI_9763E_HS400_RXDLY_5);
 	pci_write_config_dword(pdev, PCIE_GLI_9763E_CLKRXDLY, value);
 
+	/* mask the replay timer timeout of AER */
+	sdhci_gli_mask_replay_timer_timeout(pdev);
+
 	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
 	value &= ~GLI_9763E_VHS_REV;
 	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
Signature · 1 line
2.50.1