Skip to contentSkip to conversation

Documentation: ocfs2: Properly reindent filecheck operations list

PATCH Applied Bagas Sanjaya 3 participants 3 messages Aug 26, 2025 – Aug 29, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Documentation: ocfs2: Properly reindent filecheck operations list

Some of texts in filecheck operations list are indented out of the list. In particular, the third operation is shown not as the third list item but rather as a separate paragraph.

Reindent the list so that gets properly rendered as such.

---
 .../filesystems/ocfs2-online-filecheck.rst    | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
Documentation/filesystems/ocfs2-online-filecheck.rst +10 -10
index 2257bb53edc1b1..9e8449416e0bee 100644
@@ -58,33 +58,33 @@ inode, fixing inode and setting the size of result record history.
     # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/check
     # cat /sys/fs/ocfs2/<devname>/filecheck/check
 
-The output is like this::
+   The output is like this::
 
     INO		DONE	ERROR
     39502		1	GENERATION
 
-    <INO> lists the inode numbers.
-    <DONE> indicates whether the operation has been finished.
-    <ERROR> says what kind of errors was found. For the detailed error numbers,
-    please refer to the file linux/fs/ocfs2/filecheck.h.
+   <INO> lists the inode numbers.
+   <DONE> indicates whether the operation has been finished.
+   <ERROR> says what kind of errors was found. For the detailed error numbers,
+   please refer to the file linux/fs/ocfs2/filecheck.h.
 
 2. If you determine to fix this inode, do::
 
     # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/fix
     # cat /sys/fs/ocfs2/<devname>/filecheck/fix
 
-The output is like this:::
+   The output is like this::
 
     INO		DONE	ERROR
     39502		1	SUCCESS
 
-This time, the <ERROR> column indicates whether this fix is successful or not.
+   This time, the <ERROR> column indicates whether this fix is successful or not.
 
 3. The record cache is used to store the history of check/fix results. It's
-default size is 10, and can be adjust between the range of 10 ~ 100. You can
-adjust the size like this::
+   default size is 10, and can be adjust between the range of 10 ~ 100. You can
+   adjust the size like this::
 
-  # echo "<size>" > /sys/fs/ocfs2/<devname>/filecheck/set
+    # echo "<size>" > /sys/fs/ocfs2/<devname>/filecheck/set
 
 Fixing stuff
 ============

base-commit: ee9a6691935490dc39605882b41b9452844d5e4e

Signature · 1 line
An old man doll... just what I always wanted! - Clara
maintainer Acked-by on v1 1/1
#1 lore raw
Quoted 7 lines · Bagas Sanjaya

Some of texts in filecheck operations list are indented out of the list. In particular, the third operation is shown not as the third list item but rather as a separate paragraph.

Reindent the list so that gets properly rendered as such.

Quoted 54 lines
---
 .../filesystems/ocfs2-online-filecheck.rst    | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
Documentation/filesystems/ocfs2-online-filecheck.rst +10 -10
index 2257bb53edc1b1..9e8449416e0bee 100644
@@ -58,33 +58,33 @@ inode, fixing inode and setting the size of result record history.
     # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/check
     # cat /sys/fs/ocfs2/<devname>/filecheck/check
 
-The output is like this::
+   The output is like this::
 
     INO		DONE	ERROR
     39502		1	GENERATION
 
-    <INO> lists the inode numbers.
-    <DONE> indicates whether the operation has been finished.
-    <ERROR> says what kind of errors was found. For the detailed error numbers,
-    please refer to the file linux/fs/ocfs2/filecheck.h.
+   <INO> lists the inode numbers.
+   <DONE> indicates whether the operation has been finished.
+   <ERROR> says what kind of errors was found. For the detailed error numbers,
+   please refer to the file linux/fs/ocfs2/filecheck.h.
 
 2. If you determine to fix this inode, do::
 
     # echo "<inode>" > /sys/fs/ocfs2/<devname>/filecheck/fix
     # cat /sys/fs/ocfs2/<devname>/filecheck/fix
 
-The output is like this:::
+   The output is like this::
 
     INO		DONE	ERROR
     39502		1	SUCCESS
 
-This time, the <ERROR> column indicates whether this fix is successful or not.
+   This time, the <ERROR> column indicates whether this fix is successful or not.
 
 3. The record cache is used to store the history of check/fix results. It's
-default size is 10, and can be adjust between the range of 10 ~ 100. You can
-adjust the size like this::
+   default size is 10, and can be adjust between the range of 10 ~ 100. You can
+   adjust the size like this::
 
-  # echo "<size>" > /sys/fs/ocfs2/<devname>/filecheck/set
+    # echo "<size>" > /sys/fs/ocfs2/<devname>/filecheck/set
 
 Fixing stuff
 ============

base-commit: ee9a6691935490dc39605882b41b9452844d5e4e

maintainer Applied
#2 lore raw
In reply to Bagas Sanjaya
Quoted 10 lines · Bagas Sanjaya

Some of texts in filecheck operations list are indented out of the list. In particular, the third operation is shown not as the third list item but rather as a separate paragraph.

Reindent the list so that gets properly rendered as such.

---
 .../filesystems/ocfs2-online-filecheck.rst    | 20 +++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

Applied, thanks.

jon