Skip to contentSkip to conversation

5.4.297-rc1 review

PATCH In review Greg Kroah-Hartman 6 participants 414 messages Aug 26, 2025 – Aug 30, 2025 Page 1 of 3

Subsystems (5)
lore
Share & tools
lore

Greg Kroah-Hartman

author maintainer
#0 lore raw

cover 5.4.297-rc1 review

This is the start of the stable review cycle for the 5.4.297 release. There are 403 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Thu, 28 Aug 2025 11:08:17 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.297-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.4.297-rc1

Peter Oberparleiter <[email protected]>
s390/hypfs: Enable limited access during lockdown

Peter Oberparleiter <[email protected]>
s390/hypfs: Avoid unnecessary ioctl registration in debugfs

Takashi Iwai <[email protected]>
ALSA: usb-audio: Use correct sub-type for UAC3 feature unit validation

William Liu <[email protected]>
net/sched: Remove unnecessary WARNING condition for empty child qdisc in htb_activate

William Liu <[email protected]>
net/sched: Make cake_enqueue return NET_XMIT_CN when past buffer_limit

Jason Xing <[email protected]>
ixgbe: xsk: resolve the negative overflow of budget in ixgbe_xmit_zc

Minhong He <[email protected]>
ipv6: sr: validate HMAC algorithm ID in seg6_hmac_info_add

Dan Carpenter <[email protected]>
ALSA: usb-audio: Fix size validation in convert_chmap_v3()

Dan Carpenter <[email protected]>
scsi: qla4xxx: Prevent a potential error pointer dereference

Weitao Wang <[email protected]>
usb: xhci: Fix slot_id resource race conflict

Josef Bacik <[email protected]>
nfs: fix UAF in direct writes

Trond Myklebust <[email protected]>
NFS: Fix up commit deadlocks

Zhang Xiaoxu <[email protected]>
cifs: Fix UAF in cifs_demultiplex_thread()

Dmitry Antipov <[email protected]>
Bluetooth: fix use-after-free in device_for_each_child()

Davide Caratti <[email protected]>
act_mirred: use the backlog for nested calls to mirred ingress

Davide Caratti <[email protected]>
net/sched: act_mirred: better wording on protection against excessive stack growth

wenxu <[email protected]>
net/sched: act_mirred: refactor the handle of xmit

Jiri Pirko <[email protected]>
selftests: forwarding: tc_actions.sh: add matchall mirror test

Vlad Buslov <[email protected]>
net: sched: don't expose action qstats to skb_tc_reinsert()

Vlad Buslov <[email protected]>
net: sched: extract qstats update code into functions

Vlad Buslov <[email protected]>
net: sched: extract bstats update code into function

Vlad Buslov <[email protected]>
net: sched: extract common action counters update code into function

Lorenzo Stoakes <[email protected]>
mm: perform the mapping_map_writable() check after call_mmap()

Lorenzo Stoakes <[email protected]>
mm: update memfd seal write check to include F_SEAL_WRITE

Lorenzo Stoakes <[email protected]>
mm: drop the assumption that VM_SHARED always implies writable

Cong Wang <[email protected]>

    codel: remove sch->q.qlen check before qdisc_tree_reduce_backlog()

Cong Wang <[email protected]>
sch_qfq: make qfq_qlen_notify() idempotent

Cong Wang <[email protected]>
sch_hfsc: make hfsc_qlen_notify() idempotent

Cong Wang <[email protected]>
sch_drr: make drr_qlen_notify() idempotent

Qu Wenruo <[email protected]>
btrfs: populate otime when logging an inode item

Jorge Ramirez-Ortiz <[email protected]>
media: venus: hfi: explicitly release IRQ during teardown

Chao Yu <[email protected]>
f2fs: fix to avoid out-of-boundary access in dnode page

Jorge Ramirez-Ortiz <[email protected]>
media: venus: protect against spurious interrupts during probe

Vladimir Zapolskiy <[email protected]>
media: qcom: camss: cleanup media device allocated resource on error path

Ricardo Ribalda <[email protected]>
media: venus: vdec: Clamp param smaller than 1fps and bigger than 240.

Imre Deak <[email protected]>
drm/dp: Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS

Uwe Kleine-König <[email protected]>
pwm: mediatek: Fix duty and period setting

Uwe Kleine-König <[email protected]>
pwm: mediatek: Handle hardware enable and clock enable separately

Uwe Kleine-König <[email protected]>
pwm: mediatek: Implement .apply() callback

Gui-Dong Han <[email protected]>
media: rainshadow-cec: fix TOCTOU race condition in rain_interrupt()

Sakari Ailus <[email protected]>
media: v4l2-ctrls: Don't reset handler's error in v4l2_ctrl_handler_free()

Hans Verkuil <[email protected]>
media: v4l2-ctrls: always copy the controls on completion

Damien Le Moal <[email protected]>
ata: Fix SATA_MOBILE_LPM_POLICY description in Kconfig

Bjorn Andersson <[email protected]>
soc: qcom: mdt_loader: Ensure we don't read past the ELF header

Meagan Lloyd <[email protected]>
rtc: ds1307: handle oscillator stop flag (OSF) for ds1341

Johan Hovold <[email protected]>
usb: musb: omap2430: fix device leak at unbind

Trond Myklebust <[email protected]>
NFS: Fix the setting of capabilities when automounting a new filesystem

Trond Myklebust <[email protected]>
NFS: Fix up handling of outstanding layoutcommit in nfs_update_inode()

Trond Myklebust <[email protected]>
NFSv4: Fix nfs4_bitmap_copy_adjust()

Sebastian Reichel <[email protected]>
usb: typec: fusb302: cache PD RX state

Oliver Neukum <[email protected]>
cdc-acm: fix race between initial clearing halt and open

Johan Hovold <[email protected]>
USB: cdc-acm: do not log successful probe on later errors

Breno Leitao <[email protected]>
mm/kmemleak: avoid deadlock by moving pr_warn() outside kmemleak_lock

He Zhe <[email protected]>

    mm/kmemleak: turn kmemleak_lock and object->lock to raw_spinlock_t

Geoffrey D. Bennett <[email protected]>
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()

Dave Hansen <[email protected]>
x86/fpu: Delay instruction pointer fixup until after warning

Andy Shevchenko <[email protected]>
mm/hmm: move pmd_to_hmm_pfn_flags() to the respective #ifdeffery

Jeff Layton <[email protected]>
nfsd: handle get_client_locked() failure in nfsd4_setclientid_confirm()

Maulik Shah <[email protected]>
pmdomain: governor: Consider CPU latency tolerance from pm_domain_cpu_gov

Steven Rostedt <[email protected]>
tracing: Add down_write(trace_event_sem) when adding trace event

Mathias Nyman <[email protected]>
usb: hub: Don't try to recover devices lost during warm reset.

Mathias Nyman <[email protected]>
usb: hub: avoid warm port reset during USB3 disconnect

Yazen Ghannam <[email protected]>
x86/mce/amd: Add default names for MCA banks and blocks

Zhang Lixu <[email protected]>
iio: hid-sensor-prox: Fix incorrect OFFSET calculation

Chao Yu <[email protected]>
f2fs: fix to do sanity check on ino and xnid

Harry Yoo <[email protected]>
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n

Miaohe Lin <[email protected]>
mm/zsmalloc.c: convert to use kmem_cache_zalloc in cache_alloc_zspage()

Lin.Cao <[email protected]>
drm/sched: Remove optimization that causes hang when killing dependent jobs

Haoxiang Li <[email protected]>
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()

Ammar Faizi <[email protected]>
net: usbnet: Fix the wrong netif_carrier_on() call

John Ernberg <[email protected]>
net: usbnet: Avoid potential RCU stall on LINK_CHANGE event

Lukas Wunner <[email protected]>
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports

Li Zhong <[email protected]>
ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value

Ian Abbott <[email protected]>
comedi: Fail COMEDI_INSNLIST ioctl if n_insns is too large

Ian Abbott <[email protected]>
comedi: Fix initialization of data for instructions that write to subdevice

Nathan Chancellor <[email protected]>
kbuild: Add KBUILD_CPPFLAGS to as-option invocation

Masahiro Yamada <[email protected]>

    kbuild: add $(CLANG_FLAGS) to KBUILD_CPPFLAGS

Nathan Chancellor <[email protected]>
kbuild: Add CLANG_FLAGS to as-instr

Nathan Chancellor <[email protected]>
mips: Include KBUILD_CPPFLAGS in CHECKFLAGS invocation

Nick Desaulniers <[email protected]>
kbuild: Update assembler calls to use proper flags and language target

Nathan Chancellor <[email protected]>
ARM: 9448/1: Use an absolute path to unified.h in KBUILD_AFLAGS

Kuen-Han Tsai <[email protected]>
usb: dwc3: Ignore late xferNotReady event to prevent halt timeout

Zenm Chen <[email protected]>
USB: storage: Ignore driver CD mode for Realtek multi-mode Wi-Fi dongles

Thorsten Blum <[email protected]>

    usb: storage: realtek_cr: Use correct byte order for bcs->Residue

Mael GUERIN <[email protected]>
USB: storage: Add unusual-devs entry for Novatek NTK96550-based camera

Miao Li <[email protected]>
usb: quirks: Add DELAY_INIT quick for another SanDisk 3.2Gen1 Flash Drive

David Lechner <[email protected]>
iio: proximity: isl29501: fix buffered read on big-endian systems

Steven Rostedt <[email protected]>
ftrace: Also allocate and copy hash for reading of filter files

Xu Yilun <[email protected]>
fpga: zynq_fpga: Fix the wrong usage of dma_map_sgtable()

Al Viro <[email protected]>
use uniform permission checks for all mount propagation changes

Pavel Tikhomirov <[email protected]>
move_mount: allow to add a mount into an existing group

Ye Bin <[email protected]>
fs/buffer: fix use-after-free when call bh_read() helper

Timur Kristóf <[email protected]>
drm/amd/display: Find first CRTC and its line time in dce110_fill_display_configs

Timur Kristóf <[email protected]>
drm/amd/display: Fix fractional fb divider in set_pixel_clock_v3

Phillip Lougher <[email protected]>
squashfs: fix memory leak in squashfs_fill_super

Jiayi Li <[email protected]>
memstick: Fix deadlock by moving removing flag earlier

Vedang Nagar <[email protected]>
media: venus: Add a check for packet size after reading from shared memory

Zhang Shurong <[email protected]>

    media: ov2659: Fix memory leaks in ov2659_probe()

Ludwig Disterhof <[email protected]>
media: usbtv: Lock resolution while streaming

Haoxiang Li <[email protected]>
media: imx: fix a potential memory leak in imx_media_csc_scaler_device_init()

Dan Carpenter <[email protected]>
media: gspca: Add bounds checking to firmware parser

Jon Hunter <[email protected]>
soc/tegra: pmc: Ensure power-domains are in a known state

Baokun Li <[email protected]>
jbd2: prevent softlockup in jbd2_log_do_checkpoint()

Damien Le Moal <[email protected]>
PCI: endpoint: Fix configfs group removal on driver teardown

Damien Le Moal <[email protected]>
PCI: endpoint: Fix configfs group list head handling

Thomas Fourier <[email protected]>
mtd: rawnand: fsmc: Add missing check after DMA map

Laurentiu Mihalcea <[email protected]>
pwm: imx-tpm: Reset counter if CMOD is 0

Nathan Chancellor <[email protected]>
wifi: brcmsmac: Remove const from tbl_ptr parameter in wlc_lcnphy_common_read_table()

Marek Szyprowski <[email protected]>
zynq_fpga: use sgtable-based scatterlist wrappers

Damien Le Moal <[email protected]>
ata: libata-scsi: Fix ata_to_sense_error() status handling

Ojaswin Mujoo <[email protected]>
ext4: fix reserved gdt blocks handling in fsmap

Ojaswin Mujoo <[email protected]>
ext4: fix fsmap end of range reporting with bigalloc

Andreas Dilger <[email protected]>
ext4: check fast symlink for ea_inode correctly

Helge Deller <[email protected]>
Revert "vgacon: Add check for vc_origin address range in vgacon_scroll()"

Myrrh Periwinkle <[email protected]>
vt: defkeymap: Map keycodes above 127 to K_HOLE

Myrrh Periwinkle <[email protected]>
vt: keyboard: Don't process Unicode characters in K_OFF mode

Johan Hovold <[email protected]>
usb: dwc3: meson-g12a: fix device leaks at unbind

Johan Hovold <[email protected]>
usb: gadget: udc: renesas_usb3: fix device leak at unbind

Nathan Chancellor <[email protected]>
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()

Finn Thain <[email protected]>
m68k: Fix lost column on framebuffer debug console

Dan Carpenter <[email protected]>
cpufreq: armada-8k: Fix off by one in armada_8k_cpufreq_free_table()

Yunhui Cui <[email protected]>
serial: 8250: fix panic due to PSLVERR

Ricardo Ribalda <[email protected]>
media: uvcvideo: Do not mark valid metadata as invalid

Youngjun Lee <[email protected]>
media: uvcvideo: Fix 1-byte out-of-bounds read in uvc_parse_format()

Waiman Long <[email protected]>
mm/kmemleak: avoid soft lockup in __kmemleak_do_cleanup()

Randy Dunlap <[email protected]>
parisc: Makefile: fix a typo in palo.conf

Filipe Manana <[email protected]>
btrfs: fix log tree replay failure due to file with 0 links and extents

Eric Biggers <[email protected]>
thunderbolt: Fix copy+paste error in match_service_id()

Ian Abbott <[email protected]>
comedi: fix race between polling and detaching

Ricky Wu <[email protected]>
misc: rtsx: usb: Ensure mmc child device is active when card is present

Jack Xiao <[email protected]>
drm/amdgpu: fix incorrect vm flags to map bo

Jiasheng Jiang <[email protected]>
scsi: lpfc: Remove redundant assignment to avoid memory leak

Meagan Lloyd <[email protected]>
rtc: ds1307: remove clear of oscillator stop flag (OSF) in probe

Sergey Bashirov <[email protected]>
pNFS: Fix uninited ptr deref in block/scsi layout

Sergey Bashirov <[email protected]>
pNFS: Handle RPC size limit for layoutcommits

Sergey Bashirov <[email protected]>
pNFS: Fix disk addr range check in block/scsi layout

Sergey Bashirov <[email protected]>
pNFS: Fix stripe mapping in block/scsi layout

Buday Csaba <[email protected]>
net: phy: smsc: add proper reset flags for LAN8710A

Corey Minyard <[email protected]>
ipmi: Fix strcpy source and destination the same

Yann E. MORIN <[email protected]>
kconfig: lxdialog: fix 'space' to (de)select options

Masahiro Yamada <[email protected]>
kconfig: gconf: fix potential memory leak in renderer_edited()

Masahiro Yamada <[email protected]>
kconfig: gconf: avoid hardcoding model2 in on_treeview2_cursor_changed()

Breno Leitao <[email protected]>
ipmi: Use dev_warn_ratelimited() for incorrect message warnings

John Garry <[email protected]>
scsi: aacraid: Stop using PCI_IRQ_AFFINITY

Ranjan Kumar <[email protected]>
scsi: Fix sas_user_scan() to handle wildcard and multi-channel scans

Shankari Anand <[email protected]>
kconfig: nconf: Ensure null termination where strncpy is used

Suchit Karunakaran <[email protected]>
kconfig: lxdialog: replace strcpy() with strncpy() in inputbox.c

Wolfram Sang <[email protected]>
i3c: don't fail if GETHDRCAP is unsupported

Timothy Pearson <[email protected]>
PCI: pnv_php: Work around switches with broken presence detection

Wolfram Sang <[email protected]>
i3c: add missing include to internal header

chenchangcheng <[email protected]>
media: uvcvideo: Fix bandwidth issue for Alcor camera

Alex Guo <[email protected]>
media: dvb-frontends: w7090p: fix null-ptr-deref in w7090p_tuner_write_serpar and w7090p_tuner_read_serpar

Alex Guo <[email protected]>

    media: dvb-frontends: dib7090p: fix null-ptr-deref in dib7090p_rw_on_apb()

Wolfram Sang <[email protected]>
media: usb: hdpvr: disable zero-length read messages

Dave Stevenson <[email protected]>
media: tc358743: Increase FIFO trigger level to 374

Dave Stevenson <[email protected]>
media: tc358743: Return an appropriate colorspace from tc358743_set_fmt

Dave Stevenson <[email protected]>
media: tc358743: Check I2C succeeded during probe

Cheick Traore <[email protected]>
pinctrl: stm32: Manage irq affinity settings

Damien Le Moal <[email protected]>
scsi: mpt3sas: Correctly handle ATA device errors

Justin Tee <[email protected]>
scsi: lpfc: Check for hdwq null ptr when cleaning up lpfc_vport structure

Yury Norov [NVIDIA] <[email protected]>
RDMA: hfi1: fix possible divide-by-zero in find_hw_thread_mask()

Thomas Weißschuh <[email protected]>
MIPS: Don't crash in stack_top() for tasks without ABI or vDSO

Arnaud Lecomte <[email protected]>
jfs: upper bound check of tree index in dbAllocAG

Edward Adam Davis <[email protected]>
jfs: Regular file corruption check

Lizhi Xu <[email protected]>
jfs: truncate good inode pages when hard link is 0

jackysliu <[email protected]>
scsi: bfa: Double-free fix

Shiji Yang <[email protected]>

    MIPS: vpe-mt: add missing prototypes for vpe_{alloc,start,stop,free}

Sebastian Reichel <[email protected]>
watchdog: dw_wdt: Fix default timeout

Amir Mohammad Jahangirzad <[email protected]>
fs/orangefs: use snprintf() instead of sprintf()

Showrya M N <[email protected]>

    scsi: libiscsi: Initialize iscsi_conn->dd_data only if memory is allocated

Theodore Ts'o <[email protected]>
ext4: do not BUG when INLINE_DATA_FL lacks system.data xattr

Pali Rohár <[email protected]>
cifs: Fix calling CIFSFindFirst() for root path without msearch

Jason Wang <[email protected]>
vhost: fail early when __vhost_add_used() fails

Álvaro Fernández Rojas <[email protected]>
net: dsa: b53: fix IP_MULTICAST_CTRL on BCM5325

Jakub Kicinski <[email protected]>
uapi: in6: restore visibility of most IPv6 socket options

Hari Kalavakunta <[email protected]>
net: ncsi: Fix buffer overflow in fetching version id

Álvaro Fernández Rojas <[email protected]>
net: dsa: b53: prevent SWITCH_CTRL access on BCM5325

Álvaro Fernández Rojas <[email protected]>

    net: dsa: b53: fix b53_imp_vlan_setup for BCM5325

Gal Pressman <[email protected]>
net: vlan: Replace BUG() with WARN_ON_ONCE() in vlan_dev_* stubs

Stanislaw Gruszka <[email protected]>
wifi: iwlegacy: Check rate_idx range after addition

Mina Almasry <[email protected]>
netmem: fix skb_frag_address_safe with unreadable skbs

Thomas Fourier <[email protected]>
wifi: rtlwifi: fix possible skb memory leak in _rtl_pci_rx_interrupt().

Pagadala Yesu Anjaneyulu <[email protected]>
wifi: iwlwifi: fw: Fix possible memory leak in iwl_fw_dbg_collect

Rand Deeb <[email protected]>
wifi: iwlwifi: dvm: fix potential overflow in rs_fill_link_cmd()

Jonas Rebmann <[email protected]>
net: fec: allow disable coalescing

Thomas Fourier <[email protected]>
(powerpc/512) Fix possible dma_unmap_single() on uninitialized pointer

Sven Schnelle <[email protected]>
s390/stp: Remove udelay from stp_sync_clock()

Avraham Stern <[email protected]>
wifi: iwlwifi: mvm: fix scan request validation

Alok Tiwari <[email protected]>
net: thunderx: Fix format-truncation warning in bgx_acpi_match_id()

Oscar Maes <[email protected]>
net: ipv4: fix incorrect MTU in broadcast routes

Ilan Peer <[email protected]>
wifi: cfg80211: Fix interface type validation

Paul E. McKenney <[email protected]>

    rcu: Protect ->defer_qs_iw_pending from data race

Thomas Fourier <[email protected]>
net: ag71xx: Add missing check after DMA map

Thomas Fourier <[email protected]>
et131x: Add missing check after DMA map

Alok Tiwari <[email protected]>
be2net: Use correct byte order and format string for TCP seq and ack_seq

Sven Schnelle <[email protected]>
s390/time: Use monotonic clock in get_cycles()

Johannes Berg <[email protected]>
wifi: cfg80211: reject HTC bit for management frames

Steven Rostedt <[email protected]>
ktest.pl: Prevent recursion of default variable options

Xinxin Wan <[email protected]>
ASoC: codecs: rt5640: Retry DEVICE_ID verification

Cristian Ciocaltea <[email protected]>
ALSA: usb-audio: Avoid precedence issues in mixer_quirks macros

Lucy Thrun <[email protected]>
ALSA: hda/ca0132: Fix buffer overflow in add_tuning_control

Kees Cook <[email protected]>
platform/x86: thinkpad_acpi: Handle KCOV __init vs inline mismatches

Gautham R. Shenoy <[email protected]>
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()

Oliver Neukum <[email protected]>
usb: core: usb_submit_urb: downgrade type check

Alok Tiwari <[email protected]>
ALSA: intel8x0: Fix incorrect codec index usage in mixer for ICH4

Mark Brown <[email protected]>
ASoC: hdac_hdmi: Rate limit logging on connection and disconnection

Ulf Hansson <[email protected]>
mmc: rtsx_usb_sdmmc: Fix error-path in sd_set_power_mode()

Breno Leitao <[email protected]>
ACPI: APEI: GHES: add TAINT_MACHINE_CHECK on GHES panic path

Sebastian Ott <[email protected]>
ACPI: processor: fix acpi_object initialization

tuhaowen <[email protected]>
PM: sleep: console: Fix the black screen issue

Hsin-Te Yuan <[email protected]>
thermal: sysfs: Return ENODATA instead of EAGAIN for reads

Rafael J. Wysocki <[email protected]>
PM: runtime: Clear power.needs_force_resume in pm_runtime_reinit()

Masami Hiramatsu (Google) <[email protected]>
selftests: tracing: Use mutex_unlock for testing glob filter

Aaron Kling <[email protected]>
ARM: tegra: Use I/O memcpy to write to IRAM

Bartosz Golaszewski <[email protected]>
gpio: tps65912: check the return value of regmap_update_bits()

Kuninori Morimoto <[email protected]>
ASoC: soc-dapm: set bias_level if snd_soc_dapm_set_bias_level() was successed

Alexander Kochetkov <[email protected]>
ARM: rockchip: fix kernel hang during smp initialization

Lifeng Zheng <[email protected]>
cpufreq: Exit governor when failed to start old governor

Mario Limonciello <[email protected]>
usb: xhci: Avoid showing errors during surprise removal

Jay Chen <[email protected]>
usb: xhci: Set avg_trb_len = 8 for EP0 during Address Device Command

Mario Limonciello <[email protected]>
usb: xhci: Avoid showing warnings for dying controller

Cynthia Huang <[email protected]>
selftests/futex: Define SYS_futex on 32-bit architectures with 64-bit time_t

Prashant Malani <[email protected]>
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag

Su Hui <[email protected]>

    usb: xhci: print xhci->xhc_state when queue_command failed

Al Viro <[email protected]>
securityfs: don't pin dentries twice, once is enough...

Viacheslav Dubeyko <[email protected]>
hfs: fix not erasing deleted b-tree node issue

Sarah Newman <[email protected]>
drbd: add missing kref_get in handle_write_conflicts

Jan Kara <[email protected]>
udf: Verify partition map count

Kees Cook <[email protected]>
arm64: Handle KCOV __init vs inline mismatches

Tetsuo Handa <[email protected]>
hfsplus: don't use BUG_ON() in hfsplus_create_attributes_file()

Viacheslav Dubeyko <[email protected]>
hfsplus: fix slab-out-of-bounds read in hfsplus_uni2asc()

Viacheslav Dubeyko <[email protected]>
hfsplus: fix slab-out-of-bounds in hfsplus_bnode_read()

Viacheslav Dubeyko <[email protected]>
hfs: fix slab-out-of-bounds in hfs_bnode_read()

Xin Long <[email protected]>
sctp: linearize cloned gso packets in sctp_rcv

Florian Westphal <[email protected]>
netfilter: ctnetlink: fix refcount leak on table dump

Sabrina Dubroca <[email protected]>
udp: also consider secpath when evaluating ipsec use for checksumming

Rafael J. Wysocki <[email protected]>

    ACPI: processor: perflib: Move problematic pr->performance check

Jiayi Li <[email protected]>
ACPI: processor: perflib: Fix initial _PPC limit application

Andy Shevchenko <[email protected]>
Documentation: ACPI: Fix parent device references

Sasha Levin <[email protected]>
fs: Prevent file descriptor table allocations exceeding INT_MAX

Ma Ke <[email protected]>
sunvdc: Balance device refcount in vdc_port_mpgroup_check

Dai Ngo <[email protected]>
NFSD: detect mismatch of file handle and delegation stateid in OPEN op

Johan Hovold <[email protected]>
net: dpaa: fix device leak when querying time stamp info

Johan Hovold <[email protected]>
net: gianfar: fix device leak when querying time stamp info

Fedor Pchelkin <[email protected]>
netlink: avoid infinite retry looping in netlink_unicast()

Takashi Iwai <[email protected]>
ALSA: usb-audio: Validate UAC3 cluster segment descriptors

Takashi Iwai <[email protected]>
ALSA: usb-audio: Validate UAC3 power domain descriptors, too

Pavel Begunkov <[email protected]>
io_uring: don't use int for ABI

Tao Xue <[email protected]>
usb: gadget : fix use-after-free in composite_dev_cleanup()

Jiaxun Yang <[email protected]>
MIPS: mm: tlb-r4k: Uniquify TLB entries on init

Slark Xiao <[email protected]>
USB: serial: option: add Foxconn T99W709

Budimir Markovic <[email protected]>
vsock: Do not allow binding to VMADDR_PORT_ANY

Quang Le <[email protected]>
net/packet: fix a race in packet_set_ring() and packet_notifier()

Thomas Gleixner <[email protected]>
perf/core: Prevent VMA split of buffer mappings

Thomas Gleixner <[email protected]>
perf/core: Exit early on perf_mmap() fail

Thomas Gleixner <[email protected]>
perf/core: Don't leak AUX buffer refcount on allocation failure

Eric Dumazet <[email protected]>
pptp: fix pptp_xmit() error path

Stefan Metzmacher <[email protected]>
smb: client: let recv_done() cleanup before notifying the callers.

Michal Schmidt <[email protected]>
benet: fix BUG when creating VFs

Wang Liang <[email protected]>
net: drop UFO packets in udp_rcv_segment()

Eric Dumazet <[email protected]>
ipv6: reject malicious packets in ipv6_gso_segment()

Eric Dumazet <[email protected]>
pptp: ensure minimal skb length in pptp_xmit()

Jakub Kicinski <[email protected]>
netpoll: prevent hanging NAPI when netcons gets enabled

Trond Myklebust <[email protected]>
NFS: Fix filehandle bounds checking in nfs_fh_to_dentry()

Frederic Barrat <[email protected]>
pci/hotplug/pnv-php: Wrap warnings in macro

Frederic Barrat <[email protected]>
pci/hotplug/pnv-php: Improve error msg on power state change failure

Peter Chen <[email protected]>
usb: chipidea: udc: fix sleeping function called from invalid context

Chao Yu <[email protected]>
f2fs: fix to avoid out-of-boundary access in devs.path

Chao Yu <[email protected]>
f2fs: fix to avoid panic in f2fs_evict_inode

Chao Yu <[email protected]>
f2fs: fix to avoid UAF in f2fs_sync_inode_meta()

Brian Masney <[email protected]>
rtc: pcf8563: fix incorrect maximum clock rate handling

Brian Masney <[email protected]>
rtc: hym8563: fix incorrect maximum clock rate handling

Brian Masney <[email protected]>
rtc: ds1307: fix incorrect maximum clock rate handling

Petr Pavlu <[email protected]>
module: Restore the moduleparam prefix length check

Paul Chaignon <[email protected]>
bpf: Check flow_dissector ctx accesses are aligned

Balamanikandan Gunasundar <[email protected]>
mtd: rawnand: atmel: set pmecc data setup time

Thomas Fourier <[email protected]>
mtd: rawnand: atmel: Fix dma_mapping_error() address

Zheng Yu <[email protected]>
jfs: fix metapage reference count leak in dbAllocCtl

Chenyuan Yang <[email protected]>
fbdev: imxfb: Check fb_add_videomode to prevent null-ptr-deref

Giovanni Cabiddu <[email protected]>
crypto: qat - fix seq_file position update in adf_ring_next()

Thomas Fourier <[email protected]>
dmaengine: nbpfaxi: Add missing check after DMA map

Thomas Fourier <[email protected]>
dmaengine: mv_xor: Fix missing check after DMA map and missing unmap

Dan Carpenter <[email protected]>
fs/orangefs: Allow 2 more characters in do_c_string()

Bard Liao <[email protected]>
soundwire: stream: restore params when prepare ports fail

Thomas Fourier <[email protected]>
crypto: img-hash - Fix dma_unmap_sg() nents value

Ovidiu Panait <[email protected]>
hwrng: mtk - handle devm_pm_runtime_enable errors

Dan Carpenter <[email protected]>
watchdog: ziirave_wdt: check record length in ziirave_firm_verify()

Thomas Fourier <[email protected]>
scsi: isci: Fix dma_unmap_sg() nents value

Thomas Fourier <[email protected]>
scsi: mvsas: Fix dma_unmap_sg() nents value

Thomas Fourier <[email protected]>
scsi: ibmvscsi_tgt: Fix dma_unmap_sg() nents value

Paul Kocialkowski <[email protected]>
clk: sunxi-ng: v3s: Fix de clock definition

Leo Yan <[email protected]>
perf tests bp_account: Fix leaked file descriptor

Mengbiao Xiong <[email protected]>
crypto: ccp - Fix crash when rebind ccp device for ccp.ko

Yuan Chen <[email protected]>
pinctrl: sunxi: Fix memory leak on krealloc failure

Charles Han <[email protected]>
power: supply: max14577: Handle NULL pdata when CONFIG_OF is not set

Henry Martin <[email protected]>
clk: davinci: Add NULL check in davinci_lpsc_clk_register()

Ivan Stepchenko <[email protected]>
mtd: fix possible integer overflow in erase_xfer()

Herbert Xu <[email protected]>
crypto: marvell/cesa - Fix engine load inaccuracy

Hans Zhang <[email protected]>
PCI: rockchip-host: Fix "Unexpected Completion" log message

Stanislav Fomichev <[email protected]>
vrf: Drop existing dst reference in vrf_ip6_input_dst

Xiumei Mu <[email protected]>
selftests: rtnetlink.sh: remove esp4_offload after test

Florian Westphal <[email protected]>
netfilter: xt_nfacct: don't assume acct name is null-terminated

Jimmy Assarsson <[email protected]>
can: kvaser_usb: Assign netdev.dev_port based on device channel index

Jimmy Assarsson <[email protected]>
can: kvaser_pciefd: Store device channel index

Gokul Sivakumar <[email protected]>
wifi: brcmfmac: fix P2P discovery failure in P2P peer due to missing P2P IE

Remi Pommarel <[email protected]>
Reapply "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"

Thomas Fourier <[email protected]>
mwl8k: Add missing check after DMA map

Martin Kaistra <[email protected]>
wifi: rtl8xxxu: Fix RX skb size for aggregation disabled

William Liu <[email protected]>
net/sched: Restrict conditions for adding duplicating netems to qdisc tree

Johan Korsnes <[email protected]>
arch: powerpc: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX

Fedor Pchelkin <[email protected]>
netfilter: nf_tables: adjust lockdep assertions handling

Fedor Pchelkin <[email protected]>
drm/amd/pm/powerplay/hwmgr/smu_helper: fix order of mask and value

Finn Thain <[email protected]>
m68k: Don't unregister boot console needlessly

xin.guo <[email protected]>
tcp: fix tcp_ofo_queue() to avoid including too much DUP SACK range

Jiasheng Jiang <[email protected]>
iwlwifi: Add missing check for alloc_ordered_workqueue

Xiu Jianfeng <[email protected]>
wifi: iwlwifi: Fix memory leak in iwl_mvm_init()

Daniil Dulov <[email protected]>
wifi: rtl818x: Kill URBs before clearing tx status queue

Arnd Bergmann <[email protected]>
caif: reduce stack size, again

Yuan Chen <[email protected]>
bpftool: Fix memory leak in dump_xx_nlmsg on realloc failure

Jiayuan Chen <[email protected]>
bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls

Alok Tiwari <[email protected]>
staging: nvec: Fix incorrect null termination of battery manufacturer

Brahmajit Das <[email protected]>
samples: mei: Fix building on musl libc

Lifeng Zheng <[email protected]>

    cpufreq: Init policy->rwsem before it may be possibly used

Annette Kobou <[email protected]>
ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface

Lucas De Marchi <[email protected]>
usb: early: xhci-dbc: Fix early_ioremap leak

Greg Kroah-Hartman <[email protected]>
Revert "vmci: Prevent the dispatching of uninitialized payloads"

Denis OSTERLAND-HEIM <[email protected]>
pps: fix poll support

Lizhi Xu <[email protected]>
vmci: Prevent the dispatching of uninitialized payloads

Abdun Nihaal <[email protected]>
staging: fbtft: fix potential memory leak in fbtft_framebuffer_alloc()

Krzysztof Kozlowski <[email protected]>
ARM: dts: vfxxx: Correctly use two tuples for timer address

Arnd Bergmann <[email protected]>
ASoC: ops: dynamically allocate struct snd_ctl_elem_value

Yangtao Li <[email protected]>
hfsplus: remove mutex_lock check in hfsplus_free_extents

Arnd Bergmann <[email protected]>
ASoC: Intel: fix SND_SOC_SOF dependencies

Arnd Bergmann <[email protected]>
ethernet: intel: fix building with large NR_CPUS

Xu Yang <[email protected]>
usb: phy: mxs: disconnect line when USB charger is attached

Xu Yang <[email protected]>
usb: chipidea: add USB PHY event

Peter Chen <[email protected]>
usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use

Jun Li <[email protected]>
usb: chipidea: udc: protect usb interrupt enable

Peter Chen <[email protected]>
usb: chipidea: udc: add new API ci_hdrc_gadget_connect

Daniel Dadap <[email protected]>
ALSA: hda: Add missing NVIDIA HDA codec IDs

Ian Abbott <[email protected]>
comedi: comedi_test: Fix possible deletion of uninitialized timers

Ryusuke Konishi <[email protected]>
nilfs2: reject invalid file types when reading inodes

Yang Xiwen <[email protected]>
i2c: qup: jump out of the loop in case of timeout

Xiang Mei <[email protected]>
net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class

Kito Xu (veritas501) <[email protected]>
net: appletalk: Fix use-after-free in AARP proxy probe

Andrew Lunn <[email protected]>
net: appletalk: fix kerneldoc warnings

Maor Gottlieb <[email protected]>
RDMA/core: Rate limit GID cache warning messages

Alessandro Carminati <[email protected]>
regulator: core: fix NULL dereference on unbind due to stale coupling data

Mathias Nyman <[email protected]>
usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm

Mathias Nyman <[email protected]>
usb: hub: fix detection of high tier USB3 devices behind suspended hubs

Eric Dumazet <[email protected]>
net_sched: sch_sfq: reject invalid perturb period

Octavian Purdila <[email protected]>
net_sched: sch_sfq: move the limit validation

Octavian Purdila <[email protected]>
net_sched: sch_sfq: use a temporary work area for validating configuration

Octavian Purdila <[email protected]>
net_sched: sch_sfq: don't allow 1 packet limit

Eric Dumazet <[email protected]>
net_sched: sch_sfq: handle bigger packets

Eric Dumazet <[email protected]>

    net_sched: sch_sfq: annotate data-races around q->perturb_period

Zheng Wang <[email protected]>
power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition

Minghao Chi <[email protected]>
power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of pm_runtime_get_sync

Dinghao Liu <[email protected]>
power: supply: bq24190_charger: Fix runtime PM imbalance on error

Hongyu Xie <[email protected]>
xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS

Bui Quang Minh <[email protected]>
virtio-net: ensure the received length does not exceed allocated size

Arun Raghavan <[email protected]>
ASoC: fsl_sai: Force a software reset when starting in consumer mode

Krishna Kurapati <[email protected]>
usb: dwc3: qcom: Don't leave BCR asserted

Drew Hamilton <[email protected]>
usb: musb: fix gadget state on disconnect

William Liu <[email protected]>
net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree

Dong Chenchen <[email protected]>
net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime

Luiz Augusto von Dentz <[email protected]>
Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU

Luiz Augusto von Dentz <[email protected]>
Bluetooth: SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout

Luiz Augusto von Dentz <[email protected]>
Bluetooth: SMP: If an unallowed command is received consider it a failure

Kuniyuki Iwashima <[email protected]>
Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb()

Oliver Neukum <[email protected]>
usb: net: sierra: check for no status endpoint

Xiang Mei <[email protected]>
net/sched: sch_qfq: Fix race condition on qfq_aggregate

Alok Tiwari <[email protected]>
net: emaclite: Fix missing pointer increment in aligned_read()

Ian Abbott <[email protected]>
comedi: Fix use of uninitialized data in insn_rw_emulate_bits()

Ian Abbott <[email protected]>
comedi: Fix some signed shift left operations

Ian Abbott <[email protected]>
comedi: das6402: Fix bit shift out of bounds

Ian Abbott <[email protected]>
comedi: das16m1: Fix bit shift out of bounds

Ian Abbott <[email protected]>
comedi: aio_iiro_16: Fix bit shift out of bounds

Ian Abbott <[email protected]>
comedi: pcl812: Fix bit shift out of bounds

Chen Ni <[email protected]>
iio: adc: stm32-adc: Fix race in installing chained IRQ handler

Fabio Estevam <[email protected]>

    iio: adc: max1363: Reorder mode_list[] entries

Fabio Estevam <[email protected]>

    iio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]

Andrew Jeffery <[email protected]>
soc: aspeed: lpc-snoop: Don't disable channels that aren't enabled

Andrew Jeffery <[email protected]>
soc: aspeed: lpc-snoop: Cleanup resources in stack-order

Judith Mendez <[email protected]>
mmc: sdhci_am654: Workaround for Errata i2312

Edson Juliano Drosdeck <[email protected]>
mmc: sdhci-pci: Quirk for broken command queuing on Intel GLK-based Positivo models

Thomas Fourier <[email protected]>
mmc: bcm2835: Fix dma_unmap_sg() nents value

Nathan Chancellor <[email protected]>
memstick: core: Zero initialize id_reg in h_memstick_read_dev_id()

Jan Kara <[email protected]>
isofs: Verify inode mode when loading from disk

Dan Carpenter <[email protected]>
dmaengine: nbpfaxi: Fix memory corruption in probe()

Yun Lu <[email protected]>
af_packet: fix soft lockup issue caused by tpacket_snd()

Yun Lu <[email protected]>
af_packet: fix the SO_SNDTIMEO constraint not effective on tpacked_snd()

Nathan Chancellor <[email protected]>
phonet/pep: Move call to pn_skb_get_dst_sockaddr() earlier in pep_sock_accept()

Benjamin Tissoires <[email protected]>
HID: core: do not bypass hid_hw_raw_request

Benjamin Tissoires <[email protected]>
HID: core: ensure __hid_request reserves the report ID as the first byte

Benjamin Tissoires <[email protected]>
HID: core: ensure the allocated report buffer can contain the reserved report ID

Thomas Fourier <[email protected]>
pch_uart: Fix dma_sync_sg_for_device() nents value

Nilton Perim Neto <[email protected]>
Input: xpad - set correct controller type for Acer NGR200

Clément Le Goffic <[email protected]>
i2c: stm32: fix the device used for the DMA map

Xinyu Liu <[email protected]>
usb: gadget: configfs: Fix OOB read on empty string write

Ryan Mann (NDI) <[email protected]>
USB: serial: ftdi_sio: add support for NDI EMGUIDE GEMINI

Slark Xiao <[email protected]>
USB: serial: option: add Foxconn T99W640

Fabio Porcedda <[email protected]>
USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition

-------------

Diffstat:

 Documentation/firmware-guide/acpi/i2c-muxes.rst    |   8 +-
 Makefile                                           |   7 +-
 arch/arm/Makefile                                  |   2 +-
 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts       |   1 -
 arch/arm/boot/dts/vfxxx.dtsi                       |   2 +-
 arch/arm/mach-rockchip/platsmp.c                   |  15 +-
 arch/arm/mach-tegra/reset.c                        |   2 +-
 arch/arm64/include/asm/acpi.h                      |   2 +-
 arch/m68k/Kconfig.debug                            |   2 +-
 arch/m68k/kernel/early_printk.c                    |  42 +--
 arch/m68k/kernel/head.S                            |  39 ++-
 arch/mips/Makefile                                 |   2 +-
 arch/mips/include/asm/vpe.h                        |   8 +
 arch/mips/kernel/process.c                         |  16 +-
 arch/mips/mm/tlb-r4k.c                             |  56 +++-
 arch/parisc/Makefile                               |   2 +-
 arch/powerpc/configs/ppc6xx_defconfig              |   1 -
 arch/powerpc/platforms/512x/mpc512x_lpbfifo.c      |   6 +-
 arch/s390/hypfs/hypfs_dbfs.c                       |  19 +-
 arch/s390/include/asm/timex.h                      |  13 +-
 arch/s390/kernel/time.c                            |   2 +-
 arch/x86/kernel/cpu/mce/amd.c                      |  13 +-
 arch/x86/mm/extable.c                              |   5 +-
 drivers/acpi/acpi_processor.c                      |   2 +-
 drivers/acpi/apei/ghes.c                           |   2 +
 drivers/acpi/processor_idle.c                      |   4 +-
 drivers/acpi/processor_perflib.c                   |  11 +
 drivers/ata/Kconfig                                |  35 ++-
 drivers/ata/libata-scsi.c                          |  20 +-
 drivers/base/power/domain_governor.c               |  18 +-
 drivers/base/power/runtime.c                       |   5 +
 drivers/block/drbd/drbd_receiver.c                 |   6 +-
 drivers/block/sunvdc.c                             |   4 +-
 drivers/char/hw_random/mtk-rng.c                   |   4 +-
 drivers/char/ipmi/ipmi_msghandler.c                |   8 +-
 drivers/char/ipmi/ipmi_watchdog.c                  |  59 +++--
 drivers/clk/davinci/psc.c                          |   5 +
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c               |   3 +-
 drivers/cpufreq/armada-8k-cpufreq.c                |   2 +-
 drivers/cpufreq/cppc_cpufreq.c                     |   2 +-
 drivers/cpufreq/cpufreq.c                          |  11 +-
 drivers/crypto/ccp/ccp-debugfs.c                   |   3 +
 drivers/crypto/img-hash.c                          |   2 +-
 drivers/crypto/marvell/cipher.c                    |   4 +-
 drivers/crypto/marvell/hash.c                      |   5 +-
 .../crypto/qat/qat_common/adf_transport_debug.c    |   4 +-
 drivers/dma/mv_xor.c                               |  21 +-
 drivers/dma/nbpfaxi.c                              |  24 +-
 drivers/fpga/zynq-fpga.c                           |  10 +-
 drivers/gpio/gpio-tps65912.c                       |   7 +-
 drivers/gpu/drm/amd/amdgpu/amdgpu_csa.c            |   4 +-
 .../gpu/drm/amd/display/dc/bios/command_table.c    |   2 +-
 .../amd/display/dc/clk_mgr/dce110/dce110_clk_mgr.c |  30 ++-
 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c   |   2 +-
 drivers/gpu/drm/drm_dp_helper.c                    |   2 +-
 drivers/gpu/drm/scheduler/sched_entity.c           |  23 +-
 drivers/hid/hid-core.c                             |  21 +-
 drivers/i2c/busses/i2c-qup.c                       |   4 +-
 drivers/i2c/busses/i2c-stm32.c                     |   8 +-
 drivers/i2c/busses/i2c-stm32f7.c                   |   4 +-
 drivers/i3c/internals.h                            |   1 +
 drivers/i3c/master.c                               |   2 +-
 drivers/iio/adc/max1363.c                          |  43 ++-
 drivers/iio/adc/stm32-adc-core.c                   |   7 +-
 drivers/iio/light/hid-sensor-prox.c                |   3 +-
 drivers/iio/proximity/isl29501.c                   |  14 +-
 drivers/infiniband/core/cache.c                    |   4 +-
 drivers/infiniband/hw/hfi1/affinity.c              |  44 +--
 drivers/input/joystick/xpad.c                      |   2 +-
 drivers/media/dvb-frontends/dib7000p.c             |   8 +
 drivers/media/i2c/ov2659.c                         |   3 +-
 drivers/media/i2c/tc358743.c                       |  86 +++---
 drivers/media/platform/qcom/camss/camss.c          |   4 +-
 drivers/media/platform/qcom/venus/core.c           |   8 +-
 drivers/media/platform/qcom/venus/core.h           |   2 +
 drivers/media/platform/qcom/venus/hfi_venus.c      |   5 +
 drivers/media/platform/qcom/venus/vdec.c           |   5 +-
 drivers/media/usb/gspca/vicam.c                    |  10 +-
 drivers/media/usb/hdpvr/hdpvr-i2c.c                |   6 +
 drivers/media/usb/rainshadow-cec/rainshadow-cec.c  |   3 +-
 drivers/media/usb/usbtv/usbtv-video.c              |   4 +
 drivers/media/usb/uvc/uvc_driver.c                 |   3 +
 drivers/media/usb/uvc/uvc_video.c                  |  21 +-
 drivers/media/v4l2-core/v4l2-ctrls.c               |  37 ++-
 drivers/memstick/core/memstick.c                   |   3 +-
 drivers/memstick/host/rtsx_usb_ms.c                |   1 +
 drivers/misc/cardreader/rtsx_usb.c                 |  16 +-
 drivers/mmc/host/bcm2835.c                         |   3 +-
 drivers/mmc/host/rtsx_usb_sdmmc.c                  |   4 +-
 drivers/mmc/host/sdhci-pci-core.c                  |   3 +-
 drivers/mmc/host/sdhci_am654.c                     |   9 +-
 drivers/mtd/ftl.c                                  |   2 +-
 drivers/mtd/nand/raw/atmel/nand-controller.c       |   2 +-
 drivers/mtd/nand/raw/atmel/pmecc.c                 |   6 +
 drivers/mtd/nand/raw/fsmc_nand.c                   |   2 +
 drivers/net/can/kvaser_pciefd.c                    |   1 +
 drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c   |   1 +
 drivers/net/dsa/b53/b53_common.c                   |  31 ++-
 drivers/net/dsa/b53/b53_regs.h                     |   1 +
 drivers/net/ethernet/agere/et131x.c                |  36 +++
 drivers/net/ethernet/atheros/ag71xx.c              |   9 +
 drivers/net/ethernet/cavium/thunder/thunder_bgx.c  |   4 +-
 drivers/net/ethernet/emulex/benet/be_cmds.c        |   2 +-
 drivers/net/ethernet/emulex/benet/be_main.c        |   8 +-
 drivers/net/ethernet/freescale/dpaa/dpaa_ethtool.c |   4 +-
 drivers/net/ethernet/freescale/fec_main.c          |  34 ++-
 drivers/net/ethernet/freescale/gianfar_ethtool.c   |   4 +-
 drivers/net/ethernet/intel/fm10k/fm10k.h           |   3 +-
 drivers/net/ethernet/intel/i40e/i40e.h             |   2 +-
 drivers/net/ethernet/intel/ice/ice_flex_pipe.c     |   2 +
 drivers/net/ethernet/intel/ixgbe/ixgbe.h           |   3 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe_xsk.c       |   4 +-
 drivers/net/ethernet/xilinx/xilinx_emaclite.c      |   2 +-
 drivers/net/phy/smsc.c                             |   1 +
 drivers/net/ppp/pptp.c                             |  18 +-
 drivers/net/usb/sierra_net.c                       |   4 +
 drivers/net/usb/usbnet.c                           |  11 +-
 drivers/net/virtio_net.c                           |  38 ++-
 drivers/net/vrf.c                                  |   2 +
 .../broadcom/brcm80211/brcmfmac/cfg80211.c         |   8 +-
 .../broadcom/brcm80211/brcmsmac/phy/phy_lcn.c      |   2 +-
 drivers/net/wireless/intel/iwlegacy/4965-mac.c     |   5 +-
 drivers/net/wireless/intel/iwlwifi/dvm/main.c      |  11 +-
 drivers/net/wireless/intel/iwlwifi/dvm/rs.c        |   2 +-
 drivers/net/wireless/intel/iwlwifi/fw/dbg.c        |   7 +-
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c       |   4 +-
 drivers/net/wireless/intel/iwlwifi/mvm/scan.c      |   2 +-
 drivers/net/wireless/marvell/mwl8k.c               |   4 +
 drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c |   3 +-
 .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c  |   2 +-
 drivers/net/wireless/realtek/rtlwifi/pci.c         |  18 +-
 drivers/pci/controller/pcie-rockchip-host.c        |   2 +-
 drivers/pci/endpoint/pci-ep-cfs.c                  |   1 +
 drivers/pci/endpoint/pci-epf-core.c                |   2 +-
 drivers/pci/hotplug/pnv_php.c                      |  90 +++++--
 drivers/pci/pci-acpi.c                             |   4 +-
 drivers/pci/pci.c                                  |   8 +-
 drivers/pci/probe.c                                |   2 +-
 drivers/pinctrl/stm32/pinctrl-stm32.c              |   1 +
 drivers/pinctrl/sunxi/pinctrl-sunxi.c              |  11 +-
 drivers/platform/x86/thinkpad_acpi.c               |   4 +-
 drivers/power/supply/bq24190_charger.c             |  60 ++---
 drivers/power/supply/max14577_charger.c            |   4 +-
 drivers/pps/pps.c                                  |  11 +-
 drivers/pwm/pwm-imx-tpm.c                          |   9 +
 drivers/pwm/pwm-mediatek.c                         |  78 ++++--
 drivers/regulator/core.c                           |   1 +
 drivers/rtc/rtc-ds1307.c                           |  17 +-
 drivers/rtc/rtc-hym8563.c                          |   2 +-
 drivers/rtc/rtc-pcf8563.c                          |   2 +-
 drivers/scsi/aacraid/comminit.c                    |   3 +-
 drivers/scsi/bfa/bfad_im.c                         |   1 +
 drivers/scsi/ibmvscsi_tgt/libsrp.c                 |   6 +-
 drivers/scsi/isci/request.c                        |   2 +-
 drivers/scsi/libiscsi.c                            |   3 +-
 drivers/scsi/lpfc/lpfc_debugfs.c                   |   1 -
 drivers/scsi/lpfc/lpfc_scsi.c                      |   4 +
 drivers/scsi/mpt3sas/mpt3sas_scsih.c               |  19 ++
 drivers/scsi/mvsas/mv_sas.c                        |   4 +-
 drivers/scsi/qla4xxx/ql4_os.c                      |   2 +
 drivers/scsi/scsi_scan.c                           |   2 +-
 drivers/scsi/scsi_transport_sas.c                  |  62 ++++-
 drivers/soc/aspeed/aspeed-lpc-snoop.c              |  13 +-
 drivers/soc/qcom/mdt_loader.c                      |  41 +++
 drivers/soc/tegra/pmc.c                            |  51 ++--
 drivers/soundwire/stream.c                         |   2 +-
 drivers/staging/comedi/comedi_compat32.c           |   3 +
 drivers/staging/comedi/comedi_fops.c               |  60 ++++-
 drivers/staging/comedi/comedi_internal.h           |   1 +
 drivers/staging/comedi/drivers.c                   |  30 ++-
 drivers/staging/comedi/drivers/aio_iiro_16.c       |   3 +-
 drivers/staging/comedi/drivers/comedi_test.c       |   2 +-
 drivers/staging/comedi/drivers/das16m1.c           |   3 +-
 drivers/staging/comedi/drivers/das6402.c           |   3 +-
 drivers/staging/comedi/drivers/pcl812.c            |   3 +-
 drivers/staging/fbtft/fbtft-core.c                 |   1 +
 drivers/staging/media/imx/imx-media-csc-scaler.c   |   2 +-
 drivers/staging/nvec/nvec_power.c                  |   2 +-
 drivers/thermal/thermal_sysfs.c                    |   9 +-
 drivers/thunderbolt/domain.c                       |   2 +-
 drivers/tty/serial/8250/8250_port.c                |   3 +-
 drivers/tty/serial/pch_uart.c                      |   2 +-
 drivers/tty/vt/defkeymap.c_shipped                 | 112 ++++++++
 drivers/tty/vt/keyboard.c                          |   2 +-
 drivers/usb/atm/cxacru.c                           | 172 ++++++------
 drivers/usb/chipidea/ci.h                          |  18 +-
 drivers/usb/chipidea/udc.c                         |  89 ++++---
 drivers/usb/class/cdc-acm.c                        |  13 +-
 drivers/usb/core/hub.c                             |  67 ++++-
 drivers/usb/core/quirks.c                          |   1 +
 drivers/usb/core/urb.c                             |   2 +-
 drivers/usb/dwc3/dwc3-meson-g12a.c                 |   3 +
 drivers/usb/dwc3/dwc3-qcom.c                       |   8 +-
 drivers/usb/dwc3/gadget.c                          |   9 +
 drivers/usb/early/xhci-dbc.c                       |   4 +
 drivers/usb/gadget/composite.c                     |   5 +
 drivers/usb/gadget/configfs.c                      |   2 +
 drivers/usb/gadget/udc/renesas_usb3.c              |   1 +
 drivers/usb/host/xhci-hub.c                        |   3 +-
 drivers/usb/host/xhci-mem.c                        |  24 +-
 drivers/usb/host/xhci-plat.c                       |   3 +-
 drivers/usb/host/xhci-ring.c                       |  19 +-
 drivers/usb/host/xhci.c                            |  24 +-
 drivers/usb/host/xhci.h                            |   3 +-
 drivers/usb/musb/musb_gadget.c                     |   2 +
 drivers/usb/musb/omap2430.c                        |  10 +-
 drivers/usb/phy/phy-mxs-usb.c                      |   4 +-
 drivers/usb/serial/ftdi_sio.c                      |   2 +
 drivers/usb/serial/ftdi_sio_ids.h                  |   3 +
 drivers/usb/serial/option.c                        |   7 +
 drivers/usb/storage/realtek_cr.c                   |   2 +-
 drivers/usb/storage/unusual_devs.h                 |  29 ++
 drivers/usb/typec/tcpm/fusb302.c                   |   8 +
 drivers/vhost/vhost.c                              |   3 +
 drivers/video/console/vgacon.c                     |   2 +-
 drivers/video/fbdev/imxfb.c                        |   9 +-
 drivers/watchdog/dw_wdt.c                          |   2 +
 drivers/watchdog/ziirave_wdt.c                     |   3 +
 fs/btrfs/tree-log.c                                |  53 ++--
 fs/buffer.c                                        |   2 +-
 fs/cifs/cifsglob.h                                 |   1 +
 fs/cifs/cifssmb.c                                  |  10 +
 fs/cifs/smbdirect.c                                |  14 +-
 fs/cifs/transport.c                                |  34 ++-
 fs/ext4/fsmap.c                                    |  23 +-
 fs/ext4/inline.c                                   |  19 +-
 fs/ext4/inode.c                                    |   2 +-
 fs/f2fs/f2fs.h                                     |   2 +-
 fs/f2fs/inode.c                                    |  28 +-
 fs/f2fs/node.c                                     |  10 +
 fs/file.c                                          |  15 ++
 fs/hfs/bnode.c                                     |  93 +++++++
 fs/hfsplus/bnode.c                                 |  92 +++++++
 fs/hfsplus/extents.c                               |   3 -
 fs/hfsplus/unicode.c                               |   7 +
 fs/hfsplus/xattr.c                                 |   6 +-
 fs/hugetlbfs/inode.c                               |   2 +-
 fs/isofs/inode.c                                   |   9 +-
 fs/jbd2/checkpoint.c                               |   1 +
 fs/jfs/file.c                                      |   3 +
 fs/jfs/inode.c                                     |   2 +-
 fs/jfs/jfs_dmap.c                                  |  10 +-
 fs/namespace.c                                     |  89 ++++++-
 fs/nfs/blocklayout/blocklayout.c                   |   4 +-
 fs/nfs/blocklayout/dev.c                           |   5 +-
 fs/nfs/blocklayout/extent_tree.c                   |  20 +-
 fs/nfs/client.c                                    |  44 ++-
 fs/nfs/direct.c                                    |  13 +-
 fs/nfs/export.c                                    |  11 +-
 fs/nfs/inode.c                                     |   6 +-
 fs/nfs/internal.h                                  |   1 +
 fs/nfs/nfs4client.c                                |  13 +-
 fs/nfs/nfs4proc.c                                  |  35 +--
 fs/nfs/pnfs.c                                      |  11 +-
 fs/nfs/write.c                                     |  11 +-
 fs/nfsd/nfs4state.c                                |  34 ++-
 fs/nilfs2/inode.c                                  |   9 +-
 fs/orangefs/orangefs-debugfs.c                     |   8 +-
 fs/squashfs/super.c                                |  14 +-
 fs/udf/super.c                                     |  13 +-
 include/linux/fs.h                                 |   4 +-
 include/linux/if_vlan.h                            |   6 +-
 include/linux/mm.h                                 |  26 +-
 include/linux/moduleparam.h                        |   5 +-
 include/linux/nfs_fs.h                             |   2 +
 include/linux/pci.h                                |   1 +
 include/linux/pps_kernel.h                         |   1 +
 include/linux/skbuff.h                             |  31 ++-
 include/linux/usb/chipidea.h                       |   1 +
 include/linux/usb/usbnet.h                         |   1 +
 include/net/act_api.h                              |  25 ++
 include/net/cfg80211.h                             |   2 +-
 include/net/sch_generic.h                          |  13 -
 include/net/udp.h                                  |  24 +-
 include/uapi/linux/in6.h                           |   4 +-
 include/uapi/linux/io_uring.h                      |   2 +-
 include/uapi/linux/mount.h                         |   3 +-
 kernel/events/core.c                               |  20 +-
 kernel/fork.c                                      |   2 +-
 kernel/power/console.c                             |   7 +-
 kernel/rcu/tree_plugin.h                           |   3 +
 kernel/trace/ftrace.c                              |  19 +-
 kernel/trace/trace_events.c                        |   5 +
 mm/filemap.c                                       |   2 +-
 mm/hmm.c                                           |   2 +-
 mm/kmemleak.c                                      | 120 +++++----
 mm/madvise.c                                       |   2 +-
 mm/mmap.c                                          |  26 +-
 mm/shmem.c                                         |   2 +-
 mm/zsmalloc.c                                      |   6 +-
 net/8021q/vlan.c                                   |  42 ++-
 net/8021q/vlan.h                                   |   1 +
 net/appletalk/aarp.c                               |  42 ++-
 net/appletalk/ddp.c                                |   7 +-
 net/bluetooth/hci_sysfs.c                          |  15 +-
 net/bluetooth/l2cap_core.c                         |  26 +-
 net/bluetooth/l2cap_sock.c                         |   3 +
 net/bluetooth/smp.c                                |  21 +-
 net/bluetooth/smp.h                                |   1 +
 net/caif/cfctrl.c                                  | 294 ++++++++++-----------
 net/core/filter.c                                  |   3 +
 net/core/netpoll.c                                 |   7 +
 net/ipv4/route.c                                   |   1 -
 net/ipv4/tcp_input.c                               |   3 +-
 net/ipv4/udp_offload.c                             |   2 +-
 net/ipv6/ip6_offload.c                             |   4 +-
 net/ipv6/seg6_hmac.c                               |   3 +
 net/mac80211/tx.c                                  |   1 +
 net/ncsi/internal.h                                |   2 +-
 net/ncsi/ncsi-rsp.c                                |   1 +
 net/netfilter/nf_conntrack_netlink.c               |  24 +-
 net/netfilter/nf_tables_api.c                      |   4 +-
 net/netfilter/xt_nfacct.c                          |   4 +-
 net/netlink/af_netlink.c                           |   2 +-
 net/packet/af_packet.c                             |  39 ++-
 net/phonet/pep.c                                   |   2 +-
 net/sched/act_api.c                                |  14 +
 net/sched/act_csum.c                               |   4 +-
 net/sched/act_ct.c                                 |  10 +-
 net/sched/act_gact.c                               |  14 +-
 net/sched/act_mirred.c                             |  55 ++--
 net/sched/act_police.c                             |   5 +-
 net/sched/act_tunnel_key.c                         |   2 +-
 net/sched/act_vlan.c                               |   9 +-
 net/sched/sch_cake.c                               |  14 +-
 net/sched/sch_codel.c                              |   5 +-
 net/sched/sch_drr.c                                |   7 +-
 net/sched/sch_fq_codel.c                           |   6 +-
 net/sched/sch_hfsc.c                               |   8 +-
 net/sched/sch_htb.c                                |   6 +-
 net/sched/sch_netem.c                              |  40 +++
 net/sched/sch_qfq.c                                |  40 ++-
 net/sched/sch_sfq.c                                | 116 +++++---
 net/sctp/input.c                                   |   2 +-
 net/tls/tls_sw.c                                   |  13 +
 net/vmw_vsock/af_vsock.c                           |   3 +-
 net/wireless/mlme.c                                |   3 +-
 samples/mei/mei-amt-version.c                      |   2 +-
 scripts/Kbuild.include                             |   8 +-
 scripts/kconfig/gconf.c                            |   8 +-
 scripts/kconfig/lxdialog/inputbox.c                |   6 +-
 scripts/kconfig/lxdialog/menubox.c                 |   2 +-
 scripts/kconfig/nconf.c                            |   2 +
 scripts/kconfig/nconf.gui.c                        |   1 +
 security/inode.c                                   |   2 -
 sound/pci/hda/patch_ca0132.c                       |   2 +-
 sound/pci/hda/patch_hdmi.c                         |  19 ++
 sound/pci/intel8x0.c                               |   2 +-
 sound/soc/codecs/hdac_hdmi.c                       |  10 +-
 sound/soc/codecs/rt5640.c                          |   5 +
 sound/soc/fsl/fsl_sai.c                            |  14 +-
 sound/soc/intel/boards/Kconfig                     |   2 +-
 sound/soc/soc-dapm.c                               |   4 +
 sound/soc/soc-ops.c                                |  28 +-
 sound/usb/mixer_quirks.c                           |  14 +-
 sound/usb/mixer_scarlett_gen2.c                    |   9 +
 sound/usb/stream.c                                 |  25 +-
 sound/usb/validate.c                               |  14 +-
 tools/bpf/bpftool/net.c                            |  15 +-
 tools/perf/tests/bp_account.c                      |   1 +
 .../cpupower/utils/idle_monitor/mperf_monitor.c    |   4 +-
 tools/testing/ktest/ktest.pl                       |   5 +-
 .../ftrace/test.d/ftrace/func-filter-glob.tc       |   2 +-
 tools/testing/selftests/futex/include/futextest.h  |  11 +
 .../testing/selftests/net/forwarding/tc_actions.sh |  72 ++++-
 tools/testing/selftests/net/rtnetlink.sh           |   6 +
 366 files changed, 3519 insertions(+), 1494 deletions(-)
author maintainer
#1 lore raw

PATCH 1/403 USB: serial: option: add Telit Cinterion FE910C04 (ECM) composition

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fabio Porcedda <[email protected]>

commit 252f4ac08cd2f16ecd20e4c5e41ac2a17dd86942 upstream.

Add Telit Cinterion FE910C04 (ECM) composition:
0x10c7: ECM + tty (AT) + tty (AT) + tty (diag)

usb-devices output:

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10c7 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FE910
S:  SerialNumber=f71b8b32
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
---
 drivers/usb/serial/option.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/usb/serial/option.c +3 -0
@@ -1415,6 +1415,9 @@ static const struct usb_device_id option
 	  .driver_info = NCTRL(5) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d0, 0xff, 0xff, 0x60) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x30),	/* Telit FE910C04 (ECM) */
+	  .driver_info = NCTRL(4) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10c7, 0xff, 0xff, 0x40) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x30),	/* Telit FN990B (MBIM) */
 	  .driver_info = NCTRL(6) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(TELIT_VENDOR_ID, 0x10d1, 0xff, 0xff, 0x40) },
author maintainer
#2 lore raw

PATCH 2/403 USB: serial: option: add Foxconn T99W640

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Slark Xiao <[email protected]>

commit 08f49cdb71f3759368fded4dbc9dde35a404ec2b upstream.

T99W640 is designed based on Qualconn SDX72 chip. There are 3 serial ports to be enumerated: Diag, NMEA and AT.

Test evidence as below:

T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=5000 MxCh= 0
D:  Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs=  1
P:  Vendor=0489 ProdID=e167 Rev=05.15
S:  Manufacturer=QCOM
S:  Product=SDXPINNL USB WWAN Adapter
S:  SerialNumber=cc1f1d92
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=88(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

0&1: MBIM, 2:Modem, 3:GNSS(non-serial port), 4: NMEA, 5:Diag

---
 drivers/usb/serial/option.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/serial/option.c +2 -0
@@ -2346,6 +2346,8 @@ static const struct usb_device_id option
 	  .driver_info = RSVD(3) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe145, 0xff),			/* Foxconn T99W651 RNDIS */
 	  .driver_info = RSVD(5) | RSVD(6) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe167, 0xff),                     /* Foxconn T99W640 MBIM */
+	  .driver_info = RSVD(3) },
 	{ USB_DEVICE(0x1508, 0x1001),						/* Fibocom NL668 (IOT version) */
 	  .driver_info = RSVD(4) | RSVD(5) | RSVD(6) },
 	{ USB_DEVICE(0x1782, 0x4d10) },						/* Fibocom L610 (AT mode) */
author maintainer
#3 lore raw

PATCH 3/403 USB: serial: ftdi_sio: add support for NDI EMGUIDE GEMINI

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ryan Mann (NDI) <[email protected]>

commit c980666b6958d9a841597331b38115a29a32250e upstream.

NDI (Northern Digital Inc.) is introducing a new product called the EMGUIDE GEMINI that will use an FTDI chip for USB serial communications. Add the NDI EMGUIDE GEMINI product ID that uses the NDI Vendor ID rather than the FTDI Vendor ID, unlike older products.

---
 drivers/usb/serial/ftdi_sio.c     |    2 ++
 drivers/usb/serial/ftdi_sio_ids.h |    3 +++
 2 files changed, 5 insertions(+)
drivers/usb/serial/ftdi_sio.c +2 -0
@@ -781,6 +781,8 @@ static const struct usb_device_id id_tab
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
+	{ USB_DEVICE(FTDI_NDI_VID, FTDI_NDI_EMGUIDE_GEMINI_PID),
+		.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
 	{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
 	{ USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) },
 	{ USB_DEVICE(FTDI_VID, RTSYSTEMS_USB_VX8_PID) },
drivers/usb/serial/ftdi_sio_ids.h +3 -0
@@ -197,6 +197,9 @@
 #define FTDI_NDI_FUTURE_3_PID		0xDA73	/* NDI future device #3 */
 #define FTDI_NDI_AURORA_SCU_PID		0xDA74	/* NDI Aurora SCU */
 
+#define FTDI_NDI_VID			0x23F2
+#define FTDI_NDI_EMGUIDE_GEMINI_PID	0x0003	/* NDI Emguide Gemini */
+
 /*
  * ChamSys Limited (www.chamsys.co.uk) USB wing/interface product IDs
  */
author maintainer
#4 lore raw

PATCH 4/403 usb: gadget: configfs: Fix OOB read on empty string write

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xinyu Liu <[email protected]>

commit 3014168731b7930300aab656085af784edc861f6 upstream.

When writing an empty string to either 'qw_sign' or 'landingPage' sysfs attributes, the store functions attempt to access page[l - 1] before validating that the length 'l' is greater than zero.

This patch fixes the vulnerability by adding a check at the beginning of os_desc_qw_sign_store() and webusb_landingPage_store() to handle the zero-length input case gracefully by returning immediately.

---
 drivers/usb/gadget/configfs.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/gadget/configfs.c +2 -0
@@ -824,6 +824,8 @@ static ssize_t os_desc_qw_sign_store(str
 	struct gadget_info *gi = os_desc_item_to_gadget_info(item);
 	int res, l;
 
+	if (!len)
+		return len;
 	l = min((int)len, OS_STRING_QW_SIGN_LEN >> 1);
 	if (page[l - 1] == '\n')
 		--l;
author maintainer
#5 lore raw

PATCH 5/403 i2c: stm32: fix the device used for the DMA map

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Clément Le Goffic <[email protected]>

commit c870cbbd71fccda71d575f0acd4a8d2b7cd88861 upstream.

If the DMA mapping failed, it produced an error log with the wrong device name:
"stm32-dma3 40400000.dma-controller: rejecting DMA map of vmalloc memory" Fix this issue by replacing the dev with the I2C dev.

---
 drivers/i2c/busses/i2c-stm32.c   |    8 +++-----
 drivers/i2c/busses/i2c-stm32f7.c |    4 ++--
 2 files changed, 5 insertions(+), 7 deletions(-)
drivers/i2c/busses/i2c-stm32.c +3 -5
@@ -98,7 +98,6 @@ int stm32_i2c_prep_dma_xfer(struct devic
 			    void *dma_async_param)
 {
 	struct dma_async_tx_descriptor *txdesc;
-	struct device *chan_dev;
 	int ret;
 
 	if (rd_wr) {
@@ -112,11 +111,10 @@ int stm32_i2c_prep_dma_xfer(struct devic
 	}
 
 	dma->dma_len = len;
-	chan_dev = dma->chan_using->device->dev;
 
-	dma->dma_buf = dma_map_single(chan_dev, buf, dma->dma_len,
+	dma->dma_buf = dma_map_single(dev, buf, dma->dma_len,
 				      dma->dma_data_dir);
-	if (dma_mapping_error(chan_dev, dma->dma_buf)) {
+	if (dma_mapping_error(dev, dma->dma_buf)) {
 		dev_err(dev, "DMA mapping failed\n");
 		return -EINVAL;
 	}
@@ -146,7 +144,7 @@ int stm32_i2c_prep_dma_xfer(struct devic
 	return 0;
 
 err:
-	dma_unmap_single(chan_dev, dma->dma_buf, dma->dma_len,
+	dma_unmap_single(dev, dma->dma_buf, dma->dma_len,
 			 dma->dma_data_dir);
 	return ret;
 }
drivers/i2c/busses/i2c-stm32f7.c +2 -2
@@ -632,10 +632,10 @@ static void stm32f7_i2c_dma_callback(voi
 {
 	struct stm32f7_i2c_dev *i2c_dev = (struct stm32f7_i2c_dev *)arg;
 	struct stm32_i2c_dma *dma = i2c_dev->dma;
-	struct device *dev = dma->chan_using->device->dev;
 
 	stm32f7_i2c_disable_dma_req(i2c_dev);
-	dma_unmap_single(dev, dma->dma_buf, dma->dma_len, dma->dma_data_dir);
+	dma_unmap_single(i2c_dev->dev, dma->dma_buf, dma->dma_len,
+			 dma->dma_data_dir);
 	complete(&dma->dma_complete);
 }
 
author maintainer
#6 lore raw

PATCH 6/403 Input: xpad - set correct controller type for Acer NGR200

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nilton Perim Neto <[email protected]>

commit bcce05041b21888f10b80ea903dcfe51a25c586e upstream.

The controller should have been set as XTYPE_XBOX360 and not XTYPE_XBOX. Also the entry is in the wrong place. Fix it.

---
 drivers/input/joystick/xpad.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/input/joystick/xpad.c +1 -1
@@ -142,12 +142,12 @@ static const struct xpad_device {
 	{ 0x046d, 0xca88, "Logitech Compact Controller for Xbox", 0, XTYPE_XBOX },
 	{ 0x046d, 0xca8a, "Logitech Precision Vibration Feedback Wheel", 0, XTYPE_XBOX },
 	{ 0x046d, 0xcaa3, "Logitech DriveFx Racing Wheel", 0, XTYPE_XBOX360 },
+	{ 0x0502, 0x1305, "Acer NGR200", 0, XTYPE_XBOX360 },
 	{ 0x056e, 0x2004, "Elecom JC-U3613M", 0, XTYPE_XBOX360 },
 	{ 0x05fd, 0x1007, "Mad Catz Controller (unverified)", 0, XTYPE_XBOX },
 	{ 0x05fd, 0x107a, "InterAct 'PowerPad Pro' X-Box pad (Germany)", 0, XTYPE_XBOX },
 	{ 0x05fe, 0x3030, "Chic Controller", 0, XTYPE_XBOX },
 	{ 0x05fe, 0x3031, "Chic Controller", 0, XTYPE_XBOX },
-	{ 0x0502, 0x1305, "Acer NGR200", 0, XTYPE_XBOX },
 	{ 0x062a, 0x0020, "Logic3 Xbox GamePad", 0, XTYPE_XBOX },
 	{ 0x062a, 0x0033, "Competition Pro Steering Wheel", 0, XTYPE_XBOX },
 	{ 0x06a3, 0x0200, "Saitek Racing Wheel", 0, XTYPE_XBOX },
author maintainer
#7 lore raw

PATCH 7/403 pch_uart: Fix dma_sync_sg_for_device() nents value

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

commit 6c0e9f05c9d7875995b0e92ace71be947f280bbd upstream.

The dma_sync_sg_for_device() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned according to the documentation in Documentation/core-api/dma-api.rst:450:
With the sync_sg API, all the parameters must be the same as those passed into the sg mapping API.

---
 drivers/tty/serial/pch_uart.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/tty/serial/pch_uart.c +1 -1
@@ -1025,7 +1025,7 @@ static unsigned int dma_handle_tx(struct
 			__func__);
 		return 0;
 	}
-	dma_sync_sg_for_device(port->dev, priv->sg_tx_p, nent, DMA_TO_DEVICE);
+	dma_sync_sg_for_device(port->dev, priv->sg_tx_p, num, DMA_TO_DEVICE);
 	priv->desc_tx = desc;
 	desc->callback = pch_dma_tx_complete;
 	desc->callback_param = priv;
author maintainer
#8 lore raw

PATCH 8/403 HID: core: ensure the allocated report buffer can contain the reserved report ID

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <[email protected]>

commit 4f15ee98304b96e164ff2340e1dfd6181c3f42aa upstream.

When the report ID is not used, the low level transport drivers expect the first byte to be 0. However, currently the allocated buffer not account for that extra byte, meaning that instead of having 8 guaranteed bytes for implement to be working, we only have 7.

---
 drivers/hid/hid-core.c |    5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/hid/hid-core.c +4 -1
@@ -1655,9 +1655,12 @@ u8 *hid_alloc_report_buf(struct hid_repo
 	/*
 	 * 7 extra bytes are necessary to achieve proper functionality
 	 * of implement() working on 8 byte chunks
+	 * 1 extra byte for the report ID if it is null (not used) so
+	 * we can reserve that extra byte in the first position of the buffer
+	 * when sending it to .raw_request()
 	 */
 
-	u32 len = hid_report_len(report) + 7;
+	u32 len = hid_report_len(report) + 7 + (report->id == 0);
 
 	return kzalloc(len, flags);
 }
author maintainer
#9 lore raw

PATCH 9/403 HID: core: ensure __hid_request reserves the report ID as the first byte

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <[email protected]>

commit 0d0777ccaa2d46609d05b66ba0096802a2746193 upstream.

The low level transport driver expects the first byte to be the report ID, even when the report ID is not use (in which case they just shift the buffer).

However, __hid_request() whas not offsetting the buffer it used by one in this case, meaning that the raw_request() callback emitted by the transport driver would be stripped of the first byte.

Note: this changes the API for uhid devices when a request is made through hid_hw_request. However, several considerations makes me think this is fine:
- every request to a HID device made through hid_hw_request() would see that change, but every request made through hid_hw_raw_request() already has the new behaviour. So that means that the users are already facing situations where they might have or not the first byte being the null report ID when it is 0. We are making things more straightforward in the end.
- uhid is mainly used for BLE devices
- uhid is also used for testing, but I don't see that change a big issue
- for BLE devices, we can check which kernel module is calling hid_hw_request()
- and in those modules, we can check which are using a Bluetooth device
- and then we can check if the command is used with a report ID or not.
- surprise: none of the kernel module are using a report ID 0
- and finally, bluez, in its function set_report()[0], does the same shift if the report ID is 0 and the given buffer has a size > 0.

[0] https://git.kernel.org/pub/scm/bluetooth/bluez.git/tree/profiles/input/hog-lib.c#n879

---
 drivers/hid/hid-core.c |   11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/hid/hid-core.c +9 -2
@@ -1723,7 +1723,7 @@ static struct hid_report *hid_get_report
 int __hid_request(struct hid_device *hid, struct hid_report *report,
 		int reqtype)
 {
-	char *buf;
+	char *buf, *data_buf;
 	int ret;
 	u32 len;
 
@@ -1731,10 +1731,17 @@ int __hid_request(struct hid_device *hid
 	if (!buf)
 		return -ENOMEM;
 
+	data_buf = buf;
 	len = hid_report_len(report);
 
+	if (report->id == 0) {
+		/* reserve the first byte for the report ID */
+		data_buf++;
+		len++;
+	}
+
 	if (reqtype == HID_REQ_SET_REPORT)
-		hid_output_report(report, buf);
+		hid_output_report(report, data_buf);
 
 	ret = hid->ll_driver->raw_request(hid, report->id, buf, len,
 					  report->type, reqtype);
author maintainer
#10 lore raw

PATCH 10/403 HID: core: do not bypass hid_hw_raw_request

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Benjamin Tissoires <[email protected]>

commit c2ca42f190b6714d6c481dfd3d9b62ea091c946b upstream.

hid_hw_raw_request() is actually useful to ensure the provided buffer and length are valid. Directly calling in the low level transport driver function bypassed those checks and allowed invalid paramto be used.

---
 drivers/hid/hid-core.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/hid/hid-core.c +1 -2
@@ -1743,8 +1743,7 @@ int __hid_request(struct hid_device *hid
 	if (reqtype == HID_REQ_SET_REPORT)
 		hid_output_report(report, data_buf);
 
-	ret = hid->ll_driver->raw_request(hid, report->id, buf, len,
-					  report->type, reqtype);
+	ret = hid_hw_raw_request(hid, report->id, buf, len, report->type, reqtype);
 	if (ret < 0) {
 		dbg_hid("unable to complete request: %d\n", ret);
 		goto out;
author maintainer
#11 lore raw

PATCH 11/403 phonet/pep: Move call to pn_skb_get_dst_sockaddr() earlier in pep_sock_accept()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nathan Chancellor <[email protected]>

commit 17ba793f381eb813596d6de1cc6820bcbda5ed8b upstream.

A new warning in clang [1] points out a place in pep_sock_accept() where dst is uninitialized then passed as a const pointer to pep_find_pipe():

net/phonet/pep.c:829:37: error: variable 'dst' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]

    829 |         newsk = pep_find_pipe(&pn->hlist, &dst, pipe_handle);
        |                                            ^~~:

Move the call to pn_skb_get_dst_sockaddr(), which initializes dst, to before the call to pep_find_pipe(), so that dst is consistently used initialized throughout the function.

---
 net/phonet/pep.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/phonet/pep.c +1 -1
@@ -825,6 +825,7 @@ static struct sock *pep_sock_accept(stru
 	}
 
 	/* Check for duplicate pipe handle */
+	pn_skb_get_dst_sockaddr(skb, &dst);
 	newsk = pep_find_pipe(&pn->hlist, &dst, pipe_handle);
 	if (unlikely(newsk)) {
 		__sock_put(newsk);
@@ -849,7 +850,6 @@ static struct sock *pep_sock_accept(stru
 	newsk->sk_destruct = pipe_destruct;
 
 	newpn = pep_sk(newsk);
-	pn_skb_get_dst_sockaddr(skb, &dst);
 	pn_skb_get_src_sockaddr(skb, &src);
 	newpn->pn_sk.sobject = pn_sockaddr_get_object(&dst);
 	newpn->pn_sk.dobject = pn_sockaddr_get_object(&src);
author maintainer
#12 lore raw

PATCH 12/403 af_packet: fix the SO_SNDTIMEO constraint not effective on tpacked_snd()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yun Lu <[email protected]>

commit c1ba3c0cbdb5e53a8ec5d708e99cd4c497028a13 upstream.

Due to the changes in commit 581073f626e3 ("af_packet: do not call packet_read_pending() from tpacket_destruct_skb()"), every time tpacket_destruct_skb() is executed, the skb_completion is marked as completed. When wait_for_completion_interruptible_timeout() returns completed, the pending_refcnt has not yet been reduced to zero. Therefore, when ph is NULL, the wait function may need to be called multiple times until packet_read_pending() finally returns zero.

We should call sock_sndtimeo() only once, otherwise the SO_SNDTIMEO constraint could be way off.

Fixes 581073f626e3 ("af_packet: do not call packet_read_pending() from tpacket_destruct_skb()")
---
 net/packet/af_packet.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/packet/af_packet.c +2 -2
@@ -2713,7 +2713,7 @@ static int tpacket_snd(struct packet_soc
 	int len_sum = 0;
 	int status = TP_STATUS_AVAILABLE;
 	int hlen, tlen, copylen = 0;
-	long timeo = 0;
+	long timeo;
 
 	mutex_lock(&po->pg_vec_lock);
 
@@ -2767,6 +2767,7 @@ static int tpacket_snd(struct packet_soc
 	if ((size_max > dev->mtu + reserve + VLAN_HLEN) && !po->has_vnet_hdr)
 		size_max = dev->mtu + reserve + VLAN_HLEN;
 
+	timeo = sock_sndtimeo(&po->sk, msg->msg_flags & MSG_DONTWAIT);
 	reinit_completion(&po->skb_completion);
 
 	do {
@@ -2774,7 +2775,6 @@ static int tpacket_snd(struct packet_soc
 					  TP_STATUS_SEND_REQUEST);
 		if (unlikely(ph == NULL)) {
 			if (need_wait && skb) {
-				timeo = sock_sndtimeo(&po->sk, msg->msg_flags & MSG_DONTWAIT);
 				timeo = wait_for_completion_interruptible_timeout(&po->skb_completion, timeo);
 				if (timeo <= 0) {
 					err = !timeo ? -ETIMEDOUT : -ERESTARTSYS;
author maintainer
#13 lore raw

PATCH 13/403 af_packet: fix soft lockup issue caused by tpacket_snd()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yun Lu <[email protected]>

commit 55f0bfc0370539213202f4ce1a07615327ac4713 upstream.

When MSG_DONTWAIT is not set, the tpacket_snd operation will wait for pending_refcnt to decrement to zero before returning. The pending_refcnt is decremented by 1 when the skb->destructor function is called, indicating that the skb has been successfully sent and needs to be destroyed.

If an error occurs during this process, the tpacket_snd() function will exit and return error, but pending_refcnt may not yet have decremented to zero. Assuming the next send operation is executed immediately, but there are no available frames to be sent in tx_ring (i.e., packet_current_frame returns NULL), and skb is also NULL, the function will not execute wait_for_completion_interruptible_timeout() to yield the CPU. Instead, it will enter a do-while loop, waiting for pending_refcnt to be zero. Even if the previous skb has completed transmission, the skb->destructor function can only be invoked in the ksoftirqd thread (assuming NAPI threading is enabled). When both the ksoftirqd thread and the tpacket_snd operation happen to run on the same CPU, and the CPU trapped in the do-while loop without yielding, the ksoftirqd thread will not get scheduled to run. As a result, pending_refcnt will never be reduced to zero, and the do-while loop cannot exit, eventually leading to a CPU soft lockup issue.

In fact, skb is true for all but the first iterations of that loop, and as long as pending_refcnt is not zero, even if incremented by a previous call, wait_for_completion_interruptible_timeout() should be executed to yield the CPU, allowing the ksoftirqd thread to be scheduled. Therefore, the execution condition of this function should be modified to check if pending_refcnt is not zero, instead of check skb.

- if (need_wait && skb) {
+ if (need_wait && packet_read_pending(&po->tx_ring)) {

As a result, the judgment conditions are duplicated with the end code of the while loop, and packet_read_pending() is a very expensive function. Actually, this loop can only exit when ph is NULL, so the loop condition can be changed to while (1), and in the "ph = NULL" branch, if the subsequent condition of if is not met, the loop can break directly. Now, the loop logic remains the same as origin but is clearer and more obvious.

Fixes 89ed5b519004 ("af_packet: Block execution of tasks waiting for transmit to complete in AF_PACKET")
---
 net/packet/af_packet.c |   23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)
net/packet/af_packet.c +11 -12
@@ -2774,15 +2774,21 @@ static int tpacket_snd(struct packet_soc
 		ph = packet_current_frame(po, &po->tx_ring,
 					  TP_STATUS_SEND_REQUEST);
 		if (unlikely(ph == NULL)) {
-			if (need_wait && skb) {
+			/* Note: packet_read_pending() might be slow if we
+			 * have to call it as it's per_cpu variable, but in
+			 * fast-path we don't have to call it, only when ph
+			 * is NULL, we need to check the pending_refcnt.
+			 */
+			if (need_wait && packet_read_pending(&po->tx_ring)) {
 				timeo = wait_for_completion_interruptible_timeout(&po->skb_completion, timeo);
 				if (timeo <= 0) {
 					err = !timeo ? -ETIMEDOUT : -ERESTARTSYS;
 					goto out_put;
 				}
-			}
-			/* check for additional frames */
-			continue;
+				/* check for additional frames */
+				continue;
+			} else
+				break;
 		}
 
 		skb = NULL;
@@ -2872,14 +2878,7 @@ tpacket_error:
 		}
 		packet_increment_head(&po->tx_ring);
 		len_sum += tp_len;
-	} while (likely((ph != NULL) ||
-		/* Note: packet_read_pending() might be slow if we have
-		 * to call it as it's per_cpu variable, but in fast-path
-		 * we already short-circuit the loop with the first
-		 * condition, and luckily don't have to go that path
-		 * anyway.
-		 */
-		 (need_wait && packet_read_pending(&po->tx_ring))));
+	} while (1);
 
 	err = len_sum;
 	goto out_put;
author maintainer
#14 lore raw

PATCH 14/403 dmaengine: nbpfaxi: Fix memory corruption in probe()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

commit 188c6ba1dd925849c5d94885c8bbdeb0b3dcf510 upstream.

The nbpf->chan[] array is allocated earlier in the nbpf_probe() function and it has "num_channels" elements. These three loops iterate one element farther than they should and corrupt memory.

The changes to the second loop are more involved. In this case, we're copying data from the irqbuf[] array into the nbpf->chan[] array. If the data in irqbuf[i] is the error IRQ then we skip it, so the iterators are not in sync. I added a check to ensure that we don't go beyond the end of the irqbuf[] array. I'm pretty sure this can't happen, but it seemed harmless to add a check.

On the other hand, after the loop has ended there is a check to ensure that the "chan" iterator is where we expect it to be. In the original code we went one element beyond the end of the array so the iterator wasn't in the correct place and it would always return -EINVAL. However, now it will always be in the correct place. I deleted the check since we know the result.

Fixes b45b262cefd5 ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores")
---
 drivers/dma/nbpfaxi.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/dma/nbpfaxi.c +5 -6
@@ -1349,7 +1349,7 @@ static int nbpf_probe(struct platform_de
 	if (irqs == 1) {
 		eirq = irqbuf[0];
 
-		for (i = 0; i <= num_channels; i++)
+		for (i = 0; i < num_channels; i++)
 			nbpf->chan[i].irq = irqbuf[0];
 	} else {
 		eirq = platform_get_irq_byname(pdev, "error");
@@ -1359,16 +1359,15 @@ static int nbpf_probe(struct platform_de
 		if (irqs == num_channels + 1) {
 			struct nbpf_channel *chan;
 
-			for (i = 0, chan = nbpf->chan; i <= num_channels;
+			for (i = 0, chan = nbpf->chan; i < num_channels;
 			     i++, chan++) {
 				/* Skip the error IRQ */
 				if (irqbuf[i] == eirq)
 					i++;
+				if (i >= ARRAY_SIZE(irqbuf))
+					return -EINVAL;
 				chan->irq = irqbuf[i];
 			}
-
-			if (chan != nbpf->chan + num_channels)
-				return -EINVAL;
 		} else {
 			/* 2 IRQs and more than one channel */
 			if (irqbuf[0] == eirq)
@@ -1376,7 +1375,7 @@ static int nbpf_probe(struct platform_de
 			else
 				irq = irqbuf[0];
 
-			for (i = 0; i <= num_channels; i++)
+			for (i = 0; i < num_channels; i++)
 				nbpf->chan[i].irq = irq;
 		}
 	}
author maintainer
#15 lore raw

PATCH 15/403 isofs: Verify inode mode when loading from disk

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jan Kara <[email protected]>

commit 0a9e7405131380b57e155f10242b2e25d2e51852 upstream.

Verify that the inode mode is sane when loading it from the disk to avoid complaints from VFS about setting up invalid inodes.

---
 fs/isofs/inode.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
fs/isofs/inode.c +8 -1
@@ -1499,9 +1499,16 @@ static int isofs_read_inode(struct inode
 		inode->i_op = &page_symlink_inode_operations;
 		inode_nohighmem(inode);
 		inode->i_data.a_ops = &isofs_symlink_aops;
-	} else
+	} else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) ||
+		   S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) {
 		/* XXX - parse_rock_ridge_inode() had already set i_rdev. */
 		init_special_inode(inode, inode->i_mode, inode->i_rdev);
+	} else {
+		printk(KERN_DEBUG "ISOFS: Invalid file type 0%04o for inode %lu.\n",
+			inode->i_mode, inode->i_ino);
+		ret = -EIO;
+		goto fail;
+	}
 
 	ret = 0;
 out:
author maintainer
#16 lore raw

PATCH 16/403 memstick: core: Zero initialize id_reg in h_memstick_read_dev_id()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nathan Chancellor <[email protected]>

commit 21b34a3a204ed616373a12ec17dc127ebe51eab3 upstream.

A new warning in clang [1] points out that id_reg is uninitialized then passed to memstick_init_req() as a const pointer:

drivers/memstick/core/memstick.c:330:59: error: variable 'id_reg' is uninitialized when passed as a const pointer argument here [-Werror,-Wuninitialized-const-pointer]

    330 |                 memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
        |                                                                         ^~~~~~

Commit de182cc8e882 ("drivers/memstick/core/memstick.c: avoid -Wnonnull warning") intentionally passed this variable uninitialized to avoid an -Wnonnull warning from a NULL value that was previously there because id_reg is never read from the call to memstick_init_req() in h_memstick_read_dev_id(). Just zero initialize id_reg to avoid the warning, which is likely happening in the majority of builds using modern compilers that support '-ftrivial-auto-var-init=zero'.

---
 drivers/memstick/core/memstick.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/memstick/core/memstick.c +1 -1
@@ -324,7 +324,7 @@ EXPORT_SYMBOL(memstick_init_req);
 static int h_memstick_read_dev_id(struct memstick_dev *card,
 				  struct memstick_request **mrq)
 {
-	struct ms_id_register id_reg;
+	struct ms_id_register id_reg = {};
 
 	if (!(*mrq)) {
 		memstick_init_req(&card->current_mrq, MS_TPC_READ_REG, &id_reg,
author maintainer
#17 lore raw

PATCH 17/403 mmc: bcm2835: Fix dma_unmap_sg() nents value

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

commit ff09b71bf9daeca4f21d6e5e449641c9fad75b53 upstream.

The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned.

Fixes 2f5da678351f ("mmc: bcm2835: Properly handle dmaengine_prep_slave_sg")
---
 drivers/mmc/host/bcm2835.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/mmc/host/bcm2835.c +2 -1
@@ -507,7 +507,8 @@ void bcm2835_prepare_dma(struct bcm2835_
 				       DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 
 	if (!desc) {
-		dma_unmap_sg(dma_chan->device->dev, data->sg, sg_len, dir_data);
+		dma_unmap_sg(dma_chan->device->dev, data->sg, data->sg_len,
+			     dir_data);
 		return;
 	}
 
author maintainer
#18 lore raw

PATCH 18/403 mmc: sdhci-pci: Quirk for broken command queuing on Intel GLK-based Positivo models

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Edson Juliano Drosdeck <[email protected]>

commit 50c78f398e92fafa1cbba3469c95fe04b2e4206d upstream.

Disable command queuing on Intel GLK-based Positivo models.

Without this quirk, CQE (Command Queuing Engine) causes instability or I/O errors during operation. Disabling it ensures stable operation on affected devices.

---
 drivers/mmc/host/sdhci-pci-core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-pci-core.c +2 -1
@@ -972,7 +972,8 @@ static bool glk_broken_cqhci(struct sdhc
 {
 	return slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_GLK_EMMC &&
 	       (dmi_match(DMI_BIOS_VENDOR, "LENOVO") ||
-		dmi_match(DMI_SYS_VENDOR, "IRBIS"));
+		dmi_match(DMI_SYS_VENDOR, "IRBIS") ||
+		dmi_match(DMI_SYS_VENDOR, "Positivo Tecnologia SA"));
 }
 
 static int glk_emmc_probe_slot(struct sdhci_pci_slot *slot)
author maintainer
#19 lore raw

PATCH 19/403 mmc: sdhci_am654: Workaround for Errata i2312

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Judith Mendez <[email protected]>

commit 6d0b1c01847fedd7c85a5cdf59b8cfc7d14512e6 upstream.

Errata i2312 [0] for K3 silicon mentions the maximum obtainable timeout through MMC host controller is 700ms. And for commands taking longer than 700ms, hardware timeout should be disabled and software timeout should be used.

The workaround for Errata i2312 can be achieved by adding SDHCI_QUIRK2_DISABLE_HW_TIMEOUT quirk in sdhci_am654.

[0] https://www.ti.com/lit/pdf/sprz487

Fixes 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
---
 drivers/mmc/host/sdhci_am654.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/mmc/host/sdhci_am654.c +6 -3
@@ -264,7 +264,8 @@ static struct sdhci_ops sdhci_am654_ops
 static const struct sdhci_pltfm_data sdhci_am654_pdata = {
 	.ops = &sdhci_am654_ops,
 	.quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		   SDHCI_QUIRK2_DISABLE_HW_TIMEOUT,
 };
 
 static const struct sdhci_am654_driver_data sdhci_am654_drvdata = {
@@ -286,7 +287,8 @@ static struct sdhci_ops sdhci_j721e_8bit
 static const struct sdhci_pltfm_data sdhci_j721e_8bit_pdata = {
 	.ops = &sdhci_j721e_8bit_ops,
 	.quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		   SDHCI_QUIRK2_DISABLE_HW_TIMEOUT,
 };
 
 static const struct sdhci_am654_driver_data sdhci_j721e_8bit_drvdata = {
@@ -308,7 +310,8 @@ static struct sdhci_ops sdhci_j721e_4bit
 static const struct sdhci_pltfm_data sdhci_j721e_4bit_pdata = {
 	.ops = &sdhci_j721e_4bit_ops,
 	.quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
-	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		   SDHCI_QUIRK2_DISABLE_HW_TIMEOUT,
 };
 
 static const struct sdhci_am654_driver_data sdhci_j721e_4bit_drvdata = {
author maintainer
#20 lore raw

PATCH 20/403 soc: aspeed: lpc-snoop: Cleanup resources in stack-order

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Jeffery <[email protected]>

commit 8481d59be606d2338dbfe14b04cdbd1a3402c150 upstream.

Free the kfifo after unregistering the miscdev in aspeed_lpc_disable_snoop() as the kfifo is initialised before the miscdev in aspeed_lpc_enable_snoop().

---
 drivers/soc/aspeed/aspeed-lpc-snoop.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/soc/aspeed/aspeed-lpc-snoop.c +1 -1
@@ -265,8 +265,8 @@ static void aspeed_lpc_disable_snoop(str
 		return;
 	}
 
-	kfifo_free(&lpc_snoop->chan[channel].fifo);
 	misc_deregister(&lpc_snoop->chan[channel].miscdev);
+	kfifo_free(&lpc_snoop->chan[channel].fifo);
 }
 
 static int aspeed_lpc_snoop_probe(struct platform_device *pdev)
author maintainer
#21 lore raw

PATCH 21/403 soc: aspeed: lpc-snoop: Dont disable channels that arent enabled

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Jeffery <[email protected]>

commit 56448e78a6bb4e1a8528a0e2efe94eff0400c247 upstream.

Mitigate e.g. the following:

    # echo 1e789080.lpc-snoop > /sys/bus/platform/drivers/aspeed-lpc-snoop/unbind
    ...
    [  120.363594] Unable to handle kernel NULL pointer dereference at virtual address 00000004 when write
    [  120.373866] [00000004] *pgd=00000000
    [  120.377910] Internal error: Oops: 805 [#1] SMP ARM
    [  120.383306] CPU: 1 UID: 0 PID: 315 Comm: sh Not tainted 6.15.0-rc1-00009-g926217bc7d7d-dirty #20 NONE
    ...
    [  120.679543] Call trace:
    [  120.679559]  misc_deregister from aspeed_lpc_snoop_remove+0x84/0xac
    [  120.692462]  aspeed_lpc_snoop_remove from platform_remove+0x28/0x38
    [  120.700996]  platform_remove from device_release_driver_internal+0x188/0x200
    ...
---
 drivers/soc/aspeed/aspeed-lpc-snoop.c |   11 +++++++++++
 1 file changed, 11 insertions(+)
drivers/soc/aspeed/aspeed-lpc-snoop.c +11 -0
@@ -60,6 +60,7 @@ struct aspeed_lpc_snoop_model_data {
 };
 
 struct aspeed_lpc_snoop_channel {
+	bool enabled;
 	struct kfifo		fifo;
 	wait_queue_head_t	wq;
 	struct miscdevice	miscdev;
@@ -192,6 +193,9 @@ static int aspeed_lpc_enable_snoop(struc
 	const struct aspeed_lpc_snoop_model_data *model_data =
 		of_device_get_match_data(dev);
 
+	if (WARN_ON(lpc_snoop->chan[channel].enabled))
+		return -EBUSY;
+
 	init_waitqueue_head(&lpc_snoop->chan[channel].wq);
 	/* Create FIFO datastructure */
 	rc = kfifo_alloc(&lpc_snoop->chan[channel].fifo,
@@ -238,6 +242,8 @@ static int aspeed_lpc_enable_snoop(struc
 		regmap_update_bits(lpc_snoop->regmap, HICRB,
 				hicrb_en, hicrb_en);
 
+	lpc_snoop->chan[channel].enabled = true;
+
 	return 0;
 
 err_misc_deregister:
@@ -250,6 +256,9 @@ err_free_fifo:
 static void aspeed_lpc_disable_snoop(struct aspeed_lpc_snoop *lpc_snoop,
 				     int channel)
 {
+	if (!lpc_snoop->chan[channel].enabled)
+		return;
+
 	switch (channel) {
 	case 0:
 		regmap_update_bits(lpc_snoop->regmap, HICR5,
@@ -265,6 +274,8 @@ static void aspeed_lpc_disable_snoop(str
 		return;
 	}
 
+	lpc_snoop->chan[channel].enabled = false;
+	/* Consider improving safety wrt concurrent reader(s) */
 	misc_deregister(&lpc_snoop->chan[channel].miscdev);
 	kfifo_free(&lpc_snoop->chan[channel].fifo);
 }
author maintainer
#22 lore raw

PATCH 22/403 iio: adc: max1363: Fix MAX1363_4X_CHANS/MAX1363_8X_CHANS[]

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <[email protected]>

commit 6d21f2c2dd843bceefd9455f2919f6bb526797f0 upstream.

Since commit 2718f15403fb ("iio: sanity check available_scan_masks array"), booting a board populated with a MAX11601 results in a flood of warnings:

max1363 1-0064: available_scan_mask 8 subset of 0. Never used max1363 1-0064: available_scan_mask 9 subset of 0. Never used max1363 1-0064: available_scan_mask 10 subset of 0. Never used max1363 1-0064: available_scan_mask 11 subset of 0. Never used max1363 1-0064: available_scan_mask 12 subset of 0. Never used max1363 1-0064: available_scan_mask 13 subset of 0. Never used
...

These warnings are caused by incorrect offsets used for differential channels in the MAX1363_4X_CHANS() and MAX1363_8X_CHANS() macros.

The max1363_mode_table[] defines the differential channel mappings as follows:

MAX1363_MODE_DIFF_SINGLE(0, 1, 1 << 12),
MAX1363_MODE_DIFF_SINGLE(2, 3, 1 << 13),
MAX1363_MODE_DIFF_SINGLE(4, 5, 1 << 14),
MAX1363_MODE_DIFF_SINGLE(6, 7, 1 << 15),
MAX1363_MODE_DIFF_SINGLE(8, 9, 1 << 16),
MAX1363_MODE_DIFF_SINGLE(10, 11, 1 << 17),
MAX1363_MODE_DIFF_SINGLE(1, 0, 1 << 18),
MAX1363_MODE_DIFF_SINGLE(3, 2, 1 << 19),
MAX1363_MODE_DIFF_SINGLE(5, 4, 1 << 20),
MAX1363_MODE_DIFF_SINGLE(7, 6, 1 << 21),
MAX1363_MODE_DIFF_SINGLE(9, 8, 1 << 22),
MAX1363_MODE_DIFF_SINGLE(11, 10, 1 << 23),

Update the macros to follow this same pattern, ensuring that the scan masks are valid and preventing the warnings.

---
 drivers/iio/adc/max1363.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
drivers/iio/adc/max1363.c +12 -12
@@ -505,10 +505,10 @@ static const struct iio_event_spec max13
 	MAX1363_CHAN_U(1, _s1, 1, bits, ev_spec, num_ev_spec),		\
 	MAX1363_CHAN_U(2, _s2, 2, bits, ev_spec, num_ev_spec),		\
 	MAX1363_CHAN_U(3, _s3, 3, bits, ev_spec, num_ev_spec),		\
-	MAX1363_CHAN_B(0, 1, d0m1, 4, bits, ev_spec, num_ev_spec),	\
-	MAX1363_CHAN_B(2, 3, d2m3, 5, bits, ev_spec, num_ev_spec),	\
-	MAX1363_CHAN_B(1, 0, d1m0, 6, bits, ev_spec, num_ev_spec),	\
-	MAX1363_CHAN_B(3, 2, d3m2, 7, bits, ev_spec, num_ev_spec),	\
+	MAX1363_CHAN_B(0, 1, d0m1, 12, bits, ev_spec, num_ev_spec),	\
+	MAX1363_CHAN_B(2, 3, d2m3, 13, bits, ev_spec, num_ev_spec),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 18, bits, ev_spec, num_ev_spec),	\
+	MAX1363_CHAN_B(3, 2, d3m2, 19, bits, ev_spec, num_ev_spec),	\
 	IIO_CHAN_SOFT_TIMESTAMP(8)					\
 	}
 
@@ -603,14 +603,14 @@ static const enum max1363_modes max11608
 	MAX1363_CHAN_U(5, _s5, 5, bits, NULL, 0),	\
 	MAX1363_CHAN_U(6, _s6, 6, bits, NULL, 0),	\
 	MAX1363_CHAN_U(7, _s7, 7, bits, NULL, 0),	\
-	MAX1363_CHAN_B(0, 1, d0m1, 8, bits, NULL, 0),	\
-	MAX1363_CHAN_B(2, 3, d2m3, 9, bits, NULL, 0),	\
-	MAX1363_CHAN_B(4, 5, d4m5, 10, bits, NULL, 0),	\
-	MAX1363_CHAN_B(6, 7, d6m7, 11, bits, NULL, 0),	\
-	MAX1363_CHAN_B(1, 0, d1m0, 12, bits, NULL, 0),	\
-	MAX1363_CHAN_B(3, 2, d3m2, 13, bits, NULL, 0),	\
-	MAX1363_CHAN_B(5, 4, d5m4, 14, bits, NULL, 0),	\
-	MAX1363_CHAN_B(7, 6, d7m6, 15, bits, NULL, 0),	\
+	MAX1363_CHAN_B(0, 1, d0m1, 12, bits, NULL, 0),	\
+	MAX1363_CHAN_B(2, 3, d2m3, 13, bits, NULL, 0),	\
+	MAX1363_CHAN_B(4, 5, d4m5, 14, bits, NULL, 0),	\
+	MAX1363_CHAN_B(6, 7, d6m7, 15, bits, NULL, 0),	\
+	MAX1363_CHAN_B(1, 0, d1m0, 18, bits, NULL, 0),	\
+	MAX1363_CHAN_B(3, 2, d3m2, 19, bits, NULL, 0),	\
+	MAX1363_CHAN_B(5, 4, d5m4, 20, bits, NULL, 0),	\
+	MAX1363_CHAN_B(7, 6, d7m6, 21, bits, NULL, 0),	\
 	IIO_CHAN_SOFT_TIMESTAMP(16)			\
 }
 static const struct iio_chan_spec max11602_channels[] = MAX1363_8X_CHANS(8);
author maintainer
#23 lore raw

PATCH 23/403 iio: adc: max1363: Reorder mode_list[] entries

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <[email protected]>

commit 8d8d7c1dbc46aa07a76acab7336a42ddd900be10 upstream.

The IIO core issues warnings when a scan mask is a subset of a previous entry in the available_scan_masks array.

On a board using a MAX11601, the following warning is observed:

max1363 1-0064: available_scan_mask 7 subset of 6. Never used

This occurs because the entries in the max11607_mode_list[] array are not ordered correctly. To fix this, reorder the entries so that no scan mask is a subset of an earlier one.

While at it, reorder the mode_list[] arrays for other supported chips as well, to prevent similar warnings on different variants.

Note fixes tag dropped as these were introduced over many commits a long time back and the side effect until recently was a reduction in sampling rate due to reading too many channels when only a few were desired. Now we have a sanity check that reports this error but that is not where the issue was introduced.

---
 drivers/iio/adc/max1363.c |   19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
drivers/iio/adc/max1363.c +9 -10
@@ -526,23 +526,23 @@ static const struct iio_chan_spec max136
 /* Applies to max1236, max1237 */
 static const enum max1363_modes max1236_mode_list[] = {
 	_s0, _s1, _s2, _s3,
-	s0to1, s0to2, s0to3,
+	s0to1, s0to2, s2to3, s0to3,
 	d0m1, d2m3, d1m0, d3m2,
 	d0m1to2m3, d1m0to3m2,
-	s2to3,
 };
 
 /* Applies to max1238, max1239 */
 static const enum max1363_modes max1238_mode_list[] = {
 	_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7, _s8, _s9, _s10, _s11,
 	s0to1, s0to2, s0to3, s0to4, s0to5, s0to6,
+	s6to7, s6to8, s6to9, s6to10, s6to11,
 	s0to7, s0to8, s0to9, s0to10, s0to11,
 	d0m1, d2m3, d4m5, d6m7, d8m9, d10m11,
 	d1m0, d3m2, d5m4, d7m6, d9m8, d11m10,
-	d0m1to2m3, d0m1to4m5, d0m1to6m7, d0m1to8m9, d0m1to10m11,
-	d1m0to3m2, d1m0to5m4, d1m0to7m6, d1m0to9m8, d1m0to11m10,
-	s6to7, s6to8, s6to9, s6to10, s6to11,
-	d6m7to8m9, d6m7to10m11, d7m6to9m8, d7m6to11m10,
+	d0m1to2m3, d0m1to4m5, d0m1to6m7, d6m7to8m9,
+	d0m1to8m9, d6m7to10m11, d0m1to10m11, d1m0to3m2,
+	d1m0to5m4, d1m0to7m6, d7m6to9m8, d1m0to9m8,
+	d7m6to11m10, d1m0to11m10,
 };
 
 #define MAX1363_12X_CHANS(bits) {				\
@@ -578,16 +578,15 @@ static const struct iio_chan_spec max123
 
 static const enum max1363_modes max11607_mode_list[] = {
 	_s0, _s1, _s2, _s3,
-	s0to1, s0to2, s0to3,
-	s2to3,
+	s0to1, s0to2, s2to3,
+	s0to3,
 	d0m1, d2m3, d1m0, d3m2,
 	d0m1to2m3, d1m0to3m2,
 };
 
 static const enum max1363_modes max11608_mode_list[] = {
 	_s0, _s1, _s2, _s3, _s4, _s5, _s6, _s7,
-	s0to1, s0to2, s0to3, s0to4, s0to5, s0to6, s0to7,
-	s6to7,
+	s0to1, s0to2, s0to3, s0to4, s0to5, s0to6, s6to7, s0to7,
 	d0m1, d2m3, d4m5, d6m7,
 	d1m0, d3m2, d5m4, d7m6,
 	d0m1to2m3, d0m1to4m5, d0m1to6m7,
author maintainer
#24 lore raw

PATCH 24/403 iio: adc: stm32-adc: Fix race in installing chained IRQ handler

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen Ni <[email protected]>

commit e8ad595064f6ebd5d2d1a5d5d7ebe0efce623091 upstream.

Fix a race where a pending interrupt could be received and the handler called before the handler's data has been setup, by converting to irq_set_chained_handler_and_data().

---
 drivers/iio/adc/stm32-adc-core.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/iio/adc/stm32-adc-core.c +3 -4
@@ -393,10 +393,9 @@ static int stm32_adc_irq_probe(struct pl
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < priv->cfg->num_irqs; i++) {
-		irq_set_chained_handler(priv->irq[i], stm32_adc_irq_handler);
-		irq_set_handler_data(priv->irq[i], priv);
-	}
+	for (i = 0; i < priv->cfg->num_irqs; i++)
+		irq_set_chained_handler_and_data(priv->irq[i],
+						 stm32_adc_irq_handler, priv);
 
 	return 0;
 }
author maintainer
#25 lore raw

PATCH 25/403 comedi: pcl812: Fix bit shift out of bounds

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit b14b076ce593f72585412fc7fd3747e03a5e3632 upstream.

When checking for a supported IRQ number, the following test is used:

	if ((1 << it->options[1]) & board->irq_bits) {

However, it->options[i] is an unchecked int value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring it->options[1] to be within bounds before proceeding with the original test. Valid it->options[1] values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.

---
 drivers/staging/comedi/drivers/pcl812.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/comedi/drivers/pcl812.c +2 -1
@@ -1151,7 +1151,8 @@ static int pcl812_attach(struct comedi_d
 		if (!dev->pacer)
 			return -ENOMEM;
 
-		if ((1 << it->options[1]) & board->irq_bits) {
+		if (it->options[1] > 0 && it->options[1] < 16 &&
+		    (1 << it->options[1]) & board->irq_bits) {
 			ret = request_irq(it->options[1], pcl812_interrupt, 0,
 					  dev->board_name, dev);
 			if (ret == 0)
author maintainer
#26 lore raw

PATCH 26/403 comedi: aio_iiro_16: Fix bit shift out of bounds

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit 66acb1586737a22dd7b78abc63213b1bcaa100e4 upstream.

When checking for a supported IRQ number, the following test is used:

	if ((1 << it->options[1]) & 0xdcfc) {

However, it->options[i] is an unchecked int value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring it->options[1] to be within bounds before proceeding with the original test. Valid it->options[1] values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.

Fixes ad7a370c8be4 ("staging: comedi: aio_iiro_16: add command support for change of state detection")
---
 drivers/staging/comedi/drivers/aio_iiro_16.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/comedi/drivers/aio_iiro_16.c +2 -1
@@ -178,7 +178,8 @@ static int aio_iiro_16_attach(struct com
 	 * Digital input change of state interrupts are optionally supported
 	 * using IRQ 2-7, 10-12, 14, or 15.
 	 */
-	if ((1 << it->options[1]) & 0xdcfc) {
+	if (it->options[1] > 0 && it->options[1] < 16 &&
+	    (1 << it->options[1]) & 0xdcfc) {
 		ret = request_irq(it->options[1], aio_iiro_16_cos, 0,
 				  dev->board_name, dev);
 		if (ret == 0)
author maintainer
#27 lore raw

PATCH 27/403 comedi: das16m1: Fix bit shift out of bounds

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit ed93c6f68a3be06e4e0c331c6e751f462dee3932 upstream.

When checking for a supported IRQ number, the following test is used:

	/* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */
	if ((1 << it->options[1]) & 0xdcfc) {

However, it->options[i] is an unchecked int value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring it->options[1] to be within bounds before proceeding with the original test.

---
 drivers/staging/comedi/drivers/das16m1.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/comedi/drivers/das16m1.c +2 -1
@@ -523,7 +523,8 @@ static int das16m1_attach(struct comedi_
 	devpriv->extra_iobase = dev->iobase + DAS16M1_8255_IOBASE;
 
 	/* only irqs 2, 3, 4, 5, 6, 7, 10, 11, 12, 14, and 15 are valid */
-	if ((1 << it->options[1]) & 0xdcfc) {
+	if (it->options[1] >= 2 && it->options[1] <= 15 &&
+	    (1 << it->options[1]) & 0xdcfc) {
 		ret = request_irq(it->options[1], das16m1_interrupt, 0,
 				  dev->board_name, dev);
 		if (ret == 0)
author maintainer
#28 lore raw

PATCH 28/403 comedi: das6402: Fix bit shift out of bounds

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit 70f2b28b5243df557f51c054c20058ae207baaac upstream.

When checking for a supported IRQ number, the following test is used:

	/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
	if ((1 << it->options[1]) & 0x8cec) {

However, it->options[i] is an unchecked int value from userspace, so the shift amount could be negative or out of bounds. Fix the test by requiring it->options[1] to be within bounds before proceeding with the original test. Valid it->options[1] values that select the IRQ will be in the range [1,15]. The value 0 explicitly disables the use of interrupts.

Fixes 79e5e6addbb1 ("staging: comedi: das6402: rewrite broken driver")
---
 drivers/staging/comedi/drivers/das6402.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/staging/comedi/drivers/das6402.c +2 -1
@@ -569,7 +569,8 @@ static int das6402_attach(struct comedi_
 	das6402_reset(dev);
 
 	/* IRQs 2,3,5,6,7, 10,11,15 are valid for "enhanced" mode */
-	if ((1 << it->options[1]) & 0x8cec) {
+	if (it->options[1] > 0 && it->options[1] < 16 &&
+	    (1 << it->options[1]) & 0x8cec) {
 		ret = request_irq(it->options[1], das6402_interrupt, 0,
 				  dev->board_name, dev);
 		if (ret == 0) {
author maintainer
#29 lore raw

PATCH 29/403 comedi: Fix some signed shift left operations

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit ab705c8c35e18652abc6239c07cf3441f03e2cda upstream.

Correct some left shifts of the signed integer constant 1 by some unsigned number less than 32. Change the constant to 1U to avoid shifting a 1 into the sign bit.

The corrected functions are comedi_dio_insn_config(), comedi_dio_update_state(), and __comedi_device_postconfig().

Fixes e523c6c86232 ("staging: comedi: drivers: introduce comedi_dio_insn_config()")
Fixes 05e60b13a36b ("staging: comedi: drivers: introduce comedi_dio_update_state()")
Fixes 09567cb4373e ("staging: comedi: initialize subdevice s->io_bits in postconfig")
---
 drivers/staging/comedi/drivers.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
drivers/staging/comedi/drivers.c +7 -7
@@ -339,10 +339,10 @@ int comedi_dio_insn_config(struct comedi
 			   unsigned int *data,
 			   unsigned int mask)
 {
-	unsigned int chan_mask = 1 << CR_CHAN(insn->chanspec);
+	unsigned int chan = CR_CHAN(insn->chanspec);
 
-	if (!mask)
-		mask = chan_mask;
+	if (!mask && chan < 32)
+		mask = 1U << chan;
 
 	switch (data[0]) {
 	case INSN_CONFIG_DIO_INPUT:
@@ -382,7 +382,7 @@ EXPORT_SYMBOL_GPL(comedi_dio_insn_config
 unsigned int comedi_dio_update_state(struct comedi_subdevice *s,
 				     unsigned int *data)
 {
-	unsigned int chanmask = (s->n_chan < 32) ? ((1 << s->n_chan) - 1)
+	unsigned int chanmask = (s->n_chan < 32) ? ((1U << s->n_chan) - 1)
 						 : 0xffffffff;
 	unsigned int mask = data[0] & chanmask;
 	unsigned int bits = data[1];
@@ -625,8 +625,8 @@ static int insn_rw_emulate_bits(struct c
 	if (insn->insn == INSN_WRITE) {
 		if (!(s->subdev_flags & SDF_WRITABLE))
 			return -EINVAL;
-		_data[0] = 1 << (chan - base_chan);		    /* mask */
-		_data[1] = data[0] ? (1 << (chan - base_chan)) : 0; /* bits */
+		_data[0] = 1U << (chan - base_chan);		     /* mask */
+		_data[1] = data[0] ? (1U << (chan - base_chan)) : 0; /* bits */
 	}
 
 	ret = s->insn_bits(dev, s, &_insn, _data);
@@ -709,7 +709,7 @@ static int __comedi_device_postconfig(st
 
 		if (s->type == COMEDI_SUBD_DO) {
 			if (s->n_chan < 32)
-				s->io_bits = (1 << s->n_chan) - 1;
+				s->io_bits = (1U << s->n_chan) - 1;
 			else
 				s->io_bits = 0xffffffff;
 		}
author maintainer
#30 lore raw

PATCH 30/403 comedi: Fix use of uninitialized data in insn_rw_emulate_bits()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit e9cb26291d009243a4478a7ffb37b3a9175bfce9 upstream.

For Comedi INSN_READ and INSN_WRITE instructions on "digital" subdevices (subdevice types COMEDI_SUBD_DI, COMEDI_SUBD_DO, and COMEDI_SUBD_DIO), it is common for the subdevice driver not to have insn_read and insn_write handler functions, but to have an insn_bits handler function for handling Comedi INSN_BITS instructions. In that case, the subdevice's insn_read and/or insn_write function handler pointers are set to point to the insn_rw_emulate_bits() function by __comedi_device_postconfig().

For INSN_WRITE, insn_rw_emulate_bits() currently assumes that the supplied data[0] value is a valid copy from user memory. It will at least exist because do_insnlist_ioctl() and do_insn_ioctl() in "comedi_fops.c" ensure at lease MIN_SAMPLES (16) elements are allocated. However, if insn->n is 0 (which is allowable for INSN_READ and INSN_WRITE instructions, then data[0] may contain uninitialized data, and certainly contains invalid data, possibly from a different instruction in the array of instructions handled by do_insnlist_ioctl(). This will result in an incorrect value being written to the digital output channel (or to the digital input/output channel if configured as an output), and may be reflected in the internal saved state of the channel.

Fix it by returning 0 early if insn->n is 0, before reaching the code that accesses data[0]. Previously, the function always returned 1 on success, but it is supposed to be the number of data samples actually read or written up to insn->n, which is 0 in this case.

---
 drivers/staging/comedi/drivers.c |    3 +++
 1 file changed, 3 insertions(+)
drivers/staging/comedi/drivers.c +3 -0
@@ -615,6 +615,9 @@ static int insn_rw_emulate_bits(struct c
 	unsigned int _data[2];
 	int ret;
 
+	if (insn->n == 0)
+		return 0;
+
 	memset(_data, 0, sizeof(_data));
 	memset(&_insn, 0, sizeof(_insn));
 	_insn.insn = INSN_BITS;
author maintainer
#31 lore raw

PATCH 31/403 net: emaclite: Fix missing pointer increment in aligned_read()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alok Tiwari <[email protected]>

[ Upstream commit 7727ec1523d7973defa1dff8f9c0aad288d04008 ]

Add missing post-increment operators for byte pointers in the loop that copies remaining bytes in xemaclite_aligned_read(). Without the increment, the same byte was written repeatedly to the destination.
This update aligns with xemaclite_aligned_write()

Fixes bb81b2ddfa19 ("net: add Xilinx emac lite device driver")
---
 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/xilinx/xilinx_emaclite.c +1 -1
index 951482d899f9f..a834a0c7f7705 100644
@@ -293,7 +293,7 @@ static void xemaclite_aligned_read(u32 *src_ptr, u8 *dest_ptr,
 
 		/* Read the remaining data */
 		for (; length > 0; length--)
-			*to_u8_ptr = *from_u8_ptr;
+			*to_u8_ptr++ = *from_u8_ptr++;
 	}
 }
 
Signature · 1 line
2.39.5
author maintainer
#32 lore raw

PATCH 32/403 net/sched: sch_qfq: Fix race condition on qfq_aggregate

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiang Mei <[email protected]>

[ Upstream commit 5e28d5a3f774f118896aec17a3a20a9c5c9dfc64 ]

A race condition can occur when 'agg' is modified in qfq_change_agg (called during qfq_enqueue) while other threads access it concurrently. For example, qfq_dump_class may trigger a NULL dereference, and qfq_delete_class may cause a use-after-free.

This patch addresses the issue by:

1. Moved qfq_destroy_class into the critical section.

2. Added sch_tree_lock protection to qfq_dump_class and qfq_dump_class_stats.

Fixes 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
---
 net/sched/sch_qfq.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)
net/sched/sch_qfq.c +21 -9
index c466d255f7865..2a4331a084949 100644
@@ -408,7 +408,7 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 	bool existing = false;
 	struct nlattr *tb[TCA_QFQ_MAX + 1];
 	struct qfq_aggregate *new_agg = NULL;
-	u32 weight, lmax, inv_w;
+	u32 weight, lmax, inv_w, old_weight, old_lmax;
 	int err;
 	int delta_w;
 
@@ -444,12 +444,16 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 	inv_w = ONE_FP / weight;
 	weight = ONE_FP / inv_w;
 
-	if (cl != NULL &&
-	    lmax == cl->agg->lmax &&
-	    weight == cl->agg->class_weight)
-		return 0; /* nothing to change */
+	if (cl != NULL) {
+		sch_tree_lock(sch);
+		old_weight = cl->agg->class_weight;
+		old_lmax   = cl->agg->lmax;
+		sch_tree_unlock(sch);
+		if (lmax == old_lmax && weight == old_weight)
+			return 0; /* nothing to change */
+	}
 
-	delta_w = weight - (cl ? cl->agg->class_weight : 0);
+	delta_w = weight - (cl ? old_weight : 0);
 
 	if (q->wsum + delta_w > QFQ_MAX_WSUM) {
 		pr_notice("qfq: total weight out of range (%d + %u)\n",
@@ -550,10 +554,10 @@ static int qfq_delete_class(struct Qdisc *sch, unsigned long arg)
 
 	qdisc_purge_queue(cl->qdisc);
 	qdisc_class_hash_remove(&q->clhash, &cl->common);
+	qfq_destroy_class(sch, cl);
 
 	sch_tree_unlock(sch);
 
-	qfq_destroy_class(sch, cl);
 	return 0;
 }
 
@@ -620,6 +624,7 @@ static int qfq_dump_class(struct Qdisc *sch, unsigned long arg,
 {
 	struct qfq_class *cl = (struct qfq_class *)arg;
 	struct nlattr *nest;
+	u32 class_weight, lmax;
 
 	tcm->tcm_parent	= TC_H_ROOT;
 	tcm->tcm_handle	= cl->common.classid;
@@ -628,8 +633,13 @@ static int qfq_dump_class(struct Qdisc *sch, unsigned long arg,
 	nest = nla_nest_start_noflag(skb, TCA_OPTIONS);
 	if (nest == NULL)
 		goto nla_put_failure;
-	if (nla_put_u32(skb, TCA_QFQ_WEIGHT, cl->agg->class_weight) ||
-	    nla_put_u32(skb, TCA_QFQ_LMAX, cl->agg->lmax))
+
+	sch_tree_lock(sch);
+	class_weight	= cl->agg->class_weight;
+	lmax		= cl->agg->lmax;
+	sch_tree_unlock(sch);
+	if (nla_put_u32(skb, TCA_QFQ_WEIGHT, class_weight) ||
+	    nla_put_u32(skb, TCA_QFQ_LMAX, lmax))
 		goto nla_put_failure;
 	return nla_nest_end(skb, nest);
 
@@ -646,8 +656,10 @@ static int qfq_dump_class_stats(struct Qdisc *sch, unsigned long arg,
 
 	memset(&xstats, 0, sizeof(xstats));
 
+	sch_tree_lock(sch);
 	xstats.weight = cl->agg->class_weight;
 	xstats.lmax = cl->agg->lmax;
+	sch_tree_unlock(sch);
 
 	if (gnet_stats_copy_basic(qdisc_root_sleeping_running(sch),
 				  d, NULL, &cl->bstats) < 0 ||
Signature · 1 line
2.39.5
author maintainer
#33 lore raw

PATCH 33/403 usb: net: sierra: check for no status endpoint

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Oliver Neukum <[email protected]>

[ Upstream commit 4c4ca3c46167518f8534ed70f6e3b4bf86c4d158 ]

The driver checks for having three endpoints and having bulk in and out endpoints, but not that the third endpoint is interrupt input.
Rectify the omission.

---
 drivers/net/usb/sierra_net.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/usb/sierra_net.c +4 -0
index 6f9ec5ce61dcc..a8f8134fab36c 100644
@@ -694,6 +694,10 @@ static int sierra_net_bind(struct usbnet *dev, struct usb_interface *intf)
 			status);
 		return -ENODEV;
 	}
+	if (!dev->status) {
+		dev_err(&dev->udev->dev, "No status endpoint found");
+		return -ENODEV;
+	}
 	/* Initialize sierra private data */
 	priv = kzalloc(sizeof *priv, GFP_KERNEL);
 	if (!priv)
Signature · 1 line
2.39.5
author maintainer
#34 lore raw

PATCH 34/403 Bluetooth: Fix null-ptr-deref in l2cap_sock_resume_cb()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kuniyuki Iwashima <[email protected]>

[ Upstream commit a0075accbf0d76c2dad1ad3993d2e944505d99a0 ]

syzbot reported null-ptr-deref in l2cap_sock_resume_cb(). [0]

l2cap_sock_resume_cb() has a similar problem that was fixed by commit 1bff51ea59a9 ("Bluetooth: fix use-after-free error in lock_sock_nested()").

Since both l2cap_sock_kill() and l2cap_sock_resume_cb() are executed under l2cap_sock_resume_cb(), we can avoid the issue simply by checking if chan->data is NULL.

Let's not access to the killed socket in l2cap_sock_resume_cb().

[0]:

BUG: KASAN: null-ptr-deref in instrument_atomic_write include/linux/instrumented.h:82 [inline]
BUG: KASAN: null-ptr-deref in clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
BUG: KASAN: null-ptr-deref in l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711
Write of size 8 at addr 0000000000000570 by task kworker/u9:0/52

CPU: 1 UID: 0 PID: 52 Comm: kworker/u9:0 Not tainted 6.16.0-rc4-syzkaller-g7482bb149b9f #0 PREEMPT
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Workqueue: hci0 hci_rx_work
Call trace:
 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:501 (C)
 __dump_stack+0x30/0x40 lib/dump_stack.c:94
 dump_stack_lvl+0xd8/0x12c lib/dump_stack.c:120
 print_report+0x58/0x84 mm/kasan/report.c:524
 kasan_report+0xb0/0x110 mm/kasan/report.c:634
 check_region_inline mm/kasan/generic.c:-1 [inline]
 kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:189
 __kasan_check_write+0x20/0x30 mm/kasan/shadow.c:37
 instrument_atomic_write include/linux/instrumented.h:82 [inline]
 clear_bit include/asm-generic/bitops/instrumented-atomic.h:41 [inline]
 l2cap_sock_resume_cb+0xb4/0x17c net/bluetooth/l2cap_sock.c:1711
 l2cap_security_cfm+0x524/0xea0 net/bluetooth/l2cap_core.c:7357
 hci_auth_cfm include/net/bluetooth/hci_core.h:2092 [inline]
 hci_auth_complete_evt+0x2e8/0xa4c net/bluetooth/hci_event.c:3514
 hci_event_func net/bluetooth/hci_event.c:7511 [inline]
 hci_event_packet+0x650/0xe9c net/bluetooth/hci_event.c:7565
 hci_rx_work+0x320/0xb18 net/bluetooth/hci_core.c:4070
 process_one_work+0x7e8/0x155c kernel/workqueue.c:3238
 process_scheduled_works kernel/workqueue.c:3321 [inline]
 worker_thread+0x958/0xed8 kernel/workqueue.c:3402
 kthread+0x5fc/0x75c kernel/kthread.c:464
 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:847
Fixes d97c899bde33 ("Bluetooth: Introduce L2CAP channel callback for resuming")
Reported-by [email protected]
---
 net/bluetooth/l2cap_sock.c | 3 +++
 1 file changed, 3 insertions(+)
net/bluetooth/l2cap_sock.c +3 -0
index e6d93501e106d..93df53f2b76e3 100644
@@ -1488,6 +1488,9 @@ static void l2cap_sock_resume_cb(struct l2cap_chan *chan)
 {
 	struct sock *sk = chan->data;
 
+	if (!sk)
+		return;
+
 	if (test_and_clear_bit(FLAG_PENDING_SECURITY, &chan->flags)) {
 		sk->sk_state = BT_CONNECTED;
 		chan->state = BT_CONNECTED;
Signature · 1 line
2.39.5
author maintainer
#35 lore raw

PATCH 35/403 Bluetooth: SMP: If an unallowed command is received consider it a failure

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit fe4840df0bdf341f376885271b7680764fe6b34e ]

If a command is received while a bonding is ongoing consider it a pairing failure so the session is cleanup properly and the device is disconnected immediately instead of continuing with other commands that may result in the session to get stuck without ever completing such as the case bellow:

Quoted 1 line

ACL Data RX: Handle 2048 flags 0x02 dlen 21

      SMP: Identity Information (0x08) len 16
        Identity resolving key[16]: d7e08edef97d3e62cd2331f82d8073b0
Quoted 1 line

ACL Data RX: Handle 2048 flags 0x02 dlen 21

      SMP: Signing Information (0x0a) len 16
        Signature key[16]: 1716c536f94e843a9aea8b13ffde477d

Bluetooth: hci0: unexpected SMP command 0x0a from XX:XX:XX:XX:XX:XX

Quoted 1 line

ACL Data RX: Handle 2048 flags 0x02 dlen 12

SMP: Identity Address Information (0x09) len 7
Address: XX:XX:XX:XX:XX:XX (Intel Corporate)

While accourding to core spec 6.1 the expected order is always BD_ADDR first first then CSRK:

When using LE legacy pairing, the keys shall be distributed in the following order:

LTK by the Peripheral

EDIV and Rand by the Peripheral

IRK by the Peripheral

BD_ADDR by the Peripheral

CSRK by the Peripheral

LTK by the Central

EDIV and Rand by the Central

IRK by the Central

BD_ADDR by the Central

CSRK by the Central

When using LE Secure Connections, the keys shall be distributed in the following order:

IRK by the Peripheral

BD_ADDR by the Peripheral

CSRK by the Peripheral

IRK by the Central

BD_ADDR by the Central

CSRK by the Central

According to the Core 6.1 for commands used for key distribution "Key Rejected" can be used:

'3.6.1. Key distribution and generation

A device may reject a distributed key by sending the Pairing Failed command with the reason set to "Key Rejected".

Fixes b28b4943660f ("Bluetooth: Add strict checks for allowed SMP PDUs")
---
 net/bluetooth/smp.c | 19 ++++++++++++++++++-
 net/bluetooth/smp.h |  1 +
 2 files changed, 19 insertions(+), 1 deletion(-)
net/bluetooth/smp.c +18 -1
index 4d5ba9778885d..3227956eb7417 100644
@@ -2908,8 +2908,25 @@ static int smp_sig_channel(struct l2cap_chan *chan, struct sk_buff *skb)
 	if (code > SMP_CMD_MAX)
 		goto drop;
 
-	if (smp && !test_and_clear_bit(code, &smp->allow_cmd))
+	if (smp && !test_and_clear_bit(code, &smp->allow_cmd)) {
+		/* If there is a context and the command is not allowed consider
+		 * it a failure so the session is cleanup properly.
+		 */
+		switch (code) {
+		case SMP_CMD_IDENT_INFO:
+		case SMP_CMD_IDENT_ADDR_INFO:
+		case SMP_CMD_SIGN_INFO:
+			/* 3.6.1. Key distribution and generation
+			 *
+			 * A device may reject a distributed key by sending the
+			 * Pairing Failed command with the reason set to
+			 * "Key Rejected".
+			 */
+			smp_failure(conn, SMP_KEY_REJECTED);
+			break;
+		}
 		goto drop;
+	}
 
 	/* If we don't have a context the only allowed commands are
 	 * pairing request and security request.
net/bluetooth/smp.h +1 -0
index 121edadd5f8da..f17de3d9778d0 100644
@@ -138,6 +138,7 @@ struct smp_cmd_keypress_notify {
 #define SMP_NUMERIC_COMP_FAILED		0x0c
 #define SMP_BREDR_PAIRING_IN_PROGRESS	0x0d
 #define SMP_CROSS_TRANSP_NOT_ALLOWED	0x0e
+#define SMP_KEY_REJECTED		0x0f
 
 #define SMP_MIN_ENC_KEY_SIZE		7
 #define SMP_MAX_ENC_KEY_SIZE		16
Signature · 1 line
2.39.5
author maintainer
#36 lore raw

PATCH 36/403 Bluetooth: SMP: Fix using HCI_ERROR_REMOTE_USER_TERM on timeout

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit 6ef99c917688a8510259e565bd1b168b7146295a ]

This replaces the usage of HCI_ERROR_REMOTE_USER_TERM, which as the name suggest is to indicate a regular disconnection initiated by an user, with HCI_ERROR_AUTH_FAILURE to indicate the session has timeout thus any pairing shall be considered as failed.

Fixes 1e91c29eb60c ("Bluetooth: Use hci_disconnect for immediate disconnection from SMP")
---
 net/bluetooth/smp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
net/bluetooth/smp.c +1 -1
index 3227956eb7417..65035d89af98c 100644
@@ -1368,7 +1368,7 @@ static void smp_timeout(struct work_struct *work)
 
 	BT_DBG("conn %p", conn);
 
-	hci_disconnect(conn->hcon, HCI_ERROR_REMOTE_USER_TERM);
+	hci_disconnect(conn->hcon, HCI_ERROR_AUTH_FAILURE);
 }
 
 static struct smp_chan *smp_chan_create(struct l2cap_conn *conn)
Signature · 1 line
2.39.5
author maintainer
#37 lore raw

PATCH 37/403 Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Luiz Augusto von Dentz <[email protected]>

[ Upstream commit d24e4a7fedae121d33fb32ad785b87046527eedb ]

Configuration request only configure the incoming direction of the peer initiating the request, so using the MTU is the other direction shall not be used, that said the spec allows the peer responding to adjust:

Bluetooth Core 6.1, Vol 3, Part A, Section 4.5

'Each configuration parameter value (if any is present) in an L2CAP_CONFIGURATION_RSP packet reflects an ‘adjustment’ to a configuration parameter value that has been sent (or, in case of default values, implied) in the corresponding L2CAP_CONFIGURATION_REQ packet.'

That said adjusting the MTU in the response shall be limited to ERTM channels only as for older modes the remote stack may not be able to detect the adjustment causing it to silently drop packets.

---
 net/bluetooth/l2cap_core.c | 26 +++++++++++++++++++++-----
 1 file changed, 21 insertions(+), 5 deletions(-)
net/bluetooth/l2cap_core.c +21 -5
index 4939152f6adc4..1272ad73e4011 100644
@@ -3484,12 +3484,28 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data, size_t data
 		/* Configure output options and let the other side know
 		 * which ones we don't like. */
 
-		/* If MTU is not provided in configure request, use the most recently
-		 * explicitly or implicitly accepted value for the other direction,
-		 * or the default value.
+		/* If MTU is not provided in configure request, try adjusting it
+		 * to the current output MTU if it has been set
+		 *
+		 * Bluetooth Core 6.1, Vol 3, Part A, Section 4.5
+		 *
+		 * Each configuration parameter value (if any is present) in an
+		 * L2CAP_CONFIGURATION_RSP packet reflects an ‘adjustment’ to a
+		 * configuration parameter value that has been sent (or, in case
+		 * of default values, implied) in the corresponding
+		 * L2CAP_CONFIGURATION_REQ packet.
 		 */
-		if (mtu == 0)
-			mtu = chan->imtu ? chan->imtu : L2CAP_DEFAULT_MTU;
+		if (!mtu) {
+			/* Only adjust for ERTM channels as for older modes the
+			 * remote stack may not be able to detect that the
+			 * adjustment causing it to silently drop packets.
+			 */
+			if (chan->mode == L2CAP_MODE_ERTM &&
+			    chan->omtu && chan->omtu != L2CAP_DEFAULT_MTU)
+				mtu = chan->omtu;
+			else
+				mtu = L2CAP_DEFAULT_MTU;
+		}
 
 		if (mtu < L2CAP_DEFAULT_MIN_MTU)
 			result = L2CAP_CONF_UNACCEPT;
Signature · 1 line
2.39.5
author maintainer
#38 lore raw

PATCH 38/403 net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dong Chenchen <[email protected]>

[ Upstream commit 579d4f9ca9a9a605184a9b162355f6ba131f678d ]

Assuming the "rx-vlan-filter" feature is enabled on a net device, the 8021q module will automatically add or remove VLAN 0 when the net device is put administratively up or down, respectively. There are a couple of problems with the above scheme.

The first problem is a memory leak that can happen if the "rx-vlan-filter" feature is disabled while the device is running:

 # ip link add bond1 up type bond mode 0
 # ethtool -K bond1 rx-vlan-filter off
 # ip link del dev bond1

When the device is put administratively down the "rx-vlan-filter" feature is disabled, so the 8021q module will not remove VLAN 0 and the memory will be leaked [1].

Another problem that can happen is that the kernel can automatically delete VLAN 0 when the device is put administratively down despite not adding it when the device was put administratively up since during that time the "rx-vlan-filter" feature was disabled. null-ptr-unref or bug_on[2] will be triggered by unregister_vlan_dev() for refcount imbalance if toggling filtering during runtime:

$ ip link add bond0 type bond mode 0
$ ip link add link bond0 name vlan0 type vlan id 0 protocol 802.1q
$ ethtool -K bond0 rx-vlan-filter off
$ ifconfig bond0 up
$ ethtool -K bond0 rx-vlan-filter on
$ ifconfig bond0 down
$ ip link del vlan0

Root cause is as below:
step1: add vlan0 for real_dev, such as bond, team. register_vlan_dev

    vlan_vid_add(real_dev,htons(ETH_P_8021Q),0) //refcnt=1

step2: disable vlan filter feature and enable real_dev
step3: change filter from 0 to 1
vlan_device_event
vlan_filter_push_vids
ndo_vlan_rx_add_vid //No refcnt added to real_dev vlan0
step4: real_dev down
vlan_device_event
vlan_vid_del(dev, htons(ETH_P_8021Q), 0); //refcnt=0
vlan_info_rcu_free //free vlan0
step5: delete vlan0
unregister_vlan_dev
BUG_ON(!vlan_info); //vlan_info is null

Fix both problems by noting in the VLAN info whether VLAN 0 was automatically added upon NETDEV_UP and based on that decide whether it should be deleted upon NETDEV_DOWN, regardless of the state of the "rx-vlan-filter" feature.

[1]
unreferenced object 0xffff8880068e3100 (size 256):
comm "ip", pid 384, jiffies 4296130254 hex dump (first 32 bytes):

    00 20 30 0d 80 88 ff ff 00 00 00 00 00 00 00 00  . 0.............
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace (crc 81ce31fa):
    __kmalloc_cache_noprof+0x2b5/0x340
    vlan_vid_add+0x434/0x940
    vlan_device_event.cold+0x75/0xa8
    notifier_call_chain+0xca/0x150
    __dev_notify_flags+0xe3/0x250
    rtnl_configure_link+0x193/0x260
    rtnl_newlink_create+0x383/0x8e0
    __rtnl_newlink+0x22c/0xa40
    rtnl_newlink+0x627/0xb00
    rtnetlink_rcv_msg+0x6fb/0xb70
    netlink_rcv_skb+0x11f/0x350
    netlink_unicast+0x426/0x710
    netlink_sendmsg+0x75a/0xc20
    __sock_sendmsg+0xc1/0x150
    ____sys_sendmsg+0x5aa/0x7b0
    ___sys_sendmsg+0xfc/0x180

[2]
kernel BUG at net/8021q/vlan.c:99!

Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 382 Comm: ip Not tainted 6.16.0-rc3 #61 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:unregister_vlan_dev (net/8021q/vlan.c:99 (discriminator 1))
RSP: 0018:ffff88810badf310 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff88810da84000 RCX: ffffffffb47ceb9a
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88810e8b43c8
RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff6cefe80
R10: ffffffffb677f407 R11: ffff88810badf3c0 R12: ffff88810e8b4000
R13: 0000000000000000 R14: ffff88810642a5c0 R15: 000000000000017e
FS:  00007f1ff68c20c0(0000) GS:ffff888163a24000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1ff5dad240 CR3: 0000000107e56000 CR4: 00000000000006f0
Call Trace:
 <TASK>
rtnl_dellink (net/core/rtnetlink.c:3511 net/core/rtnetlink.c:3553)

rtnetlink_rcv_msg (net/core/rtnetlink.c:6945)
netlink_rcv_skb (net/netlink/af_netlink.c:2535)
netlink_unicast (net/netlink/af_netlink.c:1314 net/netlink/af_netlink.c:1339) netlink_sendmsg (net/netlink/af_netlink.c:1883)
____sys_sendmsg (net/socket.c:712 net/socket.c:727 net/socket.c:2566) ___sys_sendmsg (net/socket.c:2622)
__sys_sendmsg (net/socket.c:2652)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)

---
 net/8021q/vlan.c | 42 +++++++++++++++++++++++++++++++++---------
 net/8021q/vlan.h |  1 +
 2 files changed, 34 insertions(+), 9 deletions(-)
net/8021q/vlan.c +33 -9
index c75fca3eed49e..14244445f944a 100644
@@ -354,6 +354,35 @@ static int __vlan_device_event(struct net_device *dev, unsigned long event)
 	return err;
 }
 
+static void vlan_vid0_add(struct net_device *dev)
+{
+	struct vlan_info *vlan_info;
+	int err;
+
+	if (!(dev->features & NETIF_F_HW_VLAN_CTAG_FILTER))
+		return;
+
+	pr_info("adding VLAN 0 to HW filter on device %s\n", dev->name);
+
+	err = vlan_vid_add(dev, htons(ETH_P_8021Q), 0);
+	if (err)
+		return;
+
+	vlan_info = rtnl_dereference(dev->vlan_info);
+	vlan_info->auto_vid0 = true;
+}
+
+static void vlan_vid0_del(struct net_device *dev)
+{
+	struct vlan_info *vlan_info = rtnl_dereference(dev->vlan_info);
+
+	if (!vlan_info || !vlan_info->auto_vid0)
+		return;
+
+	vlan_info->auto_vid0 = false;
+	vlan_vid_del(dev, htons(ETH_P_8021Q), 0);
+}
+
 static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 			     void *ptr)
 {
@@ -375,15 +404,10 @@ static int vlan_device_event(struct notifier_block *unused, unsigned long event,
 			return notifier_from_errno(err);
 	}
 
-	if ((event == NETDEV_UP) &&
-	    (dev->features & NETIF_F_HW_VLAN_CTAG_FILTER)) {
-		pr_info("adding VLAN 0 to HW filter on device %s\n",
-			dev->name);
-		vlan_vid_add(dev, htons(ETH_P_8021Q), 0);
-	}
-	if (event == NETDEV_DOWN &&
-	    (dev->features & NETIF_F_HW_VLAN_CTAG_FILTER))
-		vlan_vid_del(dev, htons(ETH_P_8021Q), 0);
+	if (event == NETDEV_UP)
+		vlan_vid0_add(dev);
+	else if (event == NETDEV_DOWN)
+		vlan_vid0_del(dev);
 
 	vlan_info = rtnl_dereference(dev->vlan_info);
 	if (!vlan_info)
net/8021q/vlan.h +1 -0
index 6728d15939295..f0d78018b0d23 100644
@@ -33,6 +33,7 @@ struct vlan_info {
 	struct vlan_group	grp;
 	struct list_head	vid_list;
 	unsigned int		nr_vids;
+	bool			auto_vid0;
 	struct rcu_head		rcu;
 };
 
Signature · 1 line
2.39.5
author maintainer
#39 lore raw

PATCH 39/403 net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: William Liu <[email protected]>

[ Upstream commit 0e1d5d9b5c5966e2e42e298670808590db5ed628 ]

htb_lookup_leaf has a BUG_ON that can trigger with the following:

tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: htb default 1 tc class add dev lo parent 1: classid 1:1 htb rate 64bit tc qdisc add dev lo parent 1:1 handle 2: netem tc qdisc add dev lo parent 2:1 handle 3: blackhole ping -I lo -c1 -W0.001 127.0.0.1

The root cause is the following:

1. htb_dequeue calls htb_dequeue_tree which calls the dequeue handler on the selected leaf qdisc
2. netem_dequeue calls enqueue on the child qdisc
3. blackhole_enqueue drops the packet and returns a value that is not just NET_XMIT_SUCCESS
4. Because of this, netem_dequeue calls qdisc_tree_reduce_backlog, and since qlen is now 0, it calls htb_qlen_notify -> htb_deactivate -> htb_deactiviate_prios -> htb_remove_class_from_row -> htb_safe_rb_erase
5. As this is the only class in the selected hprio rbtree, __rb_change_child in __rb_erase_augmented sets the rb_root pointer to NULL
6. Because blackhole_dequeue returns NULL, netem_dequeue returns NULL, which causes htb_dequeue_tree to call htb_lookup_leaf with the same hprio rbtree, and fail the BUG_ON

The function graph for this scenario is shown here:

 0)               |  htb_enqueue() {
 0) + 13.635 us   |    netem_enqueue();
 0)   4.719 us    |    htb_activate_prios();
 0) # 2249.199 us |  }
 0)               |  htb_dequeue() {
 0)   2.355 us    |    htb_lookup_leaf();
 0)               |    netem_dequeue() {
 0) + 11.061 us   |      blackhole_enqueue();
 0)               |      qdisc_tree_reduce_backlog() {
 0)               |        qdisc_lookup_rcu() {
 0)   1.873 us    |          qdisc_match_from_root();
 0)   6.292 us    |        }
 0)   1.894 us    |        htb_search();
 0)               |        htb_qlen_notify() {
 0)   2.655 us    |          htb_deactivate_prios();
 0)   6.933 us    |        }
 0) + 25.227 us   |      }
 0)   1.983 us    |      blackhole_dequeue();
 0) + 86.553 us   |    }
 0) # 2932.761 us |    qdisc_warn_nonwc();
 0)               |    htb_lookup_leaf() {
 0)               |      BUG_ON();

------------------------------------------

The full original bug report can be seen here [1].

We can fix this just by returning NULL instead of the BUG_ON, as htb_dequeue_tree returns NULL when htb_lookup_leaf returns NULL.

[1] https://lore.kernel.org/netdev/pF5XOOIim0IuEfhI-SOxTgRvNoDwuux7UHKnE_Y5-zVd4wmGvNk2ceHjKb8ORnzw0cGwfmVu42g9dL7XyJLf1NEzaztboTWcm0Ogxuojoeo=@willsroot.io/

Fixes 512bb43eb542 ("pkt_sched: sch_htb: Optimize WARN_ONs in htb_dequeue_tree() etc.")
---
 net/sched/sch_htb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
net/sched/sch_htb.c +3 -1
@@ -776,7 +776,9 @@ static struct htb_class *htb_lookup_leaf
 		u32 *pid;
 	} stk[TC_HTB_MAXDEPTH], *sp = stk;
 
-	BUG_ON(!hprio->row.rb_node);
+	if (unlikely(!hprio->row.rb_node))
+		return NULL;
+
 	sp->root = hprio->row.rb_node;
 	sp->pptr = &hprio->ptr;
 	sp->pid = &hprio->last_ptr_id;
author maintainer
#40 lore raw

PATCH 40/403 usb: musb: fix gadget state on disconnect

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Drew Hamilton <[email protected]>

commit 67a59f82196c8c4f50c83329f0577acfb1349b50 upstream.

When unplugging the USB cable or disconnecting a gadget in usb peripheral mode with echo "" > /sys/kernel/config/usb_gadget/<your_gadget>/UDC, /sys/class/udc/musb-hdrc.0/state does not change from USB_STATE_CONFIGURED.

Testing on dwc2/3 shows they both update the state to USB_STATE_NOTATTACHED.

Add calls to usb_gadget_set_state in musb_g_disconnect and musb_gadget_stop to fix both cases.

Fixes 49401f4169c0 ("usb: gadget: introduce gadget state tracking")
[ replaced musb_set_state() call with direct otg state assignment ]
---
 drivers/usb/musb/musb_gadget.c |    2 ++
 1 file changed, 2 insertions(+)
drivers/usb/musb/musb_gadget.c +2 -0
@@ -1910,6 +1910,7 @@ static int musb_gadget_stop(struct usb_g
 	 * gadget driver here and have everything work;
 	 * that currently misbehaves.
 	 */
+	usb_gadget_set_state(g, USB_STATE_NOTATTACHED);
 
 	/* Force check of devctl register for PM runtime */
 	schedule_delayed_work(&musb->irq_work, 0);
@@ -2018,6 +2019,7 @@ void musb_g_disconnect(struct musb *musb
 	case OTG_STATE_B_PERIPHERAL:
 	case OTG_STATE_B_IDLE:
 		musb->xceiv->otg->state = OTG_STATE_B_IDLE;
+		usb_gadget_set_state(&musb->g, USB_STATE_NOTATTACHED);
 		break;
 	case OTG_STATE_B_SRP_INIT:
 		break;
author maintainer
#41 lore raw

PATCH 41/403 usb: dwc3: qcom: Dont leave BCR asserted

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krishna Kurapati <[email protected]>

commit ef8abc0ba49ce717e6bc4124e88e59982671f3b5 upstream.

Leaving the USB BCR asserted prevents the associated GDSC to turn on. This blocks any subsequent attempts of probing the device, e.g. after a probe deferral, with the following showing in the log:

[    1.332226] usb30_prim_gdsc status stuck at 'off'

Leave the BCR deasserted when exiting the driver to avoid this issue.

Cc stable <[email protected]>
Fixes a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
[ adapted to individual clock management API instead of bulk clock operations ]
---
 drivers/usb/dwc3/dwc3-qcom.c |    8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/usb/dwc3/dwc3-qcom.c +2 -6
@@ -615,13 +615,13 @@ static int dwc3_qcom_probe(struct platfo
 	ret = reset_control_deassert(qcom->resets);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to deassert resets, err=%d\n", ret);
-		goto reset_assert;
+		return ret;
 	}
 
 	ret = dwc3_qcom_clk_init(qcom, of_clk_get_parent_count(np));
 	if (ret) {
 		dev_err(dev, "failed to get clocks\n");
-		goto reset_assert;
+		return ret;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -700,8 +700,6 @@ clk_disable:
 		clk_disable_unprepare(qcom->clks[i]);
 		clk_put(qcom->clks[i]);
 	}
-reset_assert:
-	reset_control_assert(qcom->resets);
 
 	return ret;
 }
@@ -725,8 +723,6 @@ static int dwc3_qcom_remove(struct platf
 	}
 	qcom->num_clocks = 0;
 
-	reset_control_assert(qcom->resets);
-
 	pm_runtime_allow(dev);
 	pm_runtime_disable(dev);
 
author maintainer
#42 lore raw

PATCH 42/403 ASoC: fsl_sai: Force a software reset when starting in consumer mode

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arun Raghavan <[email protected]>

commit dc78f7e59169d3f0e6c3c95d23dc8e55e95741e2 upstream.

On an imx8mm platform with an external clock provider, when running the receiver (arecord) and triggering an xrun with xrun_injection, we see a channel swap/offset. This happens sometimes when running only the receiver, but occurs reliably if a transmitter (aplay) is also concurrently running.

It seems that the SAI loses track of frame sync during the trigger stop -> trigger start cycle that occurs during an xrun. Doing just a FIFO reset in this case does not suffice, and only a software reset seems to get it back on track.

This looks like the same h/w bug that is already handled for the producer case, so we now do the reset unconditionally on config disable.

---
 sound/soc/fsl/fsl_sai.c |   14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
sound/soc/fsl/fsl_sai.c +8 -6
@@ -565,13 +565,15 @@ static void fsl_sai_config_disable(struc
 	 * anymore. Add software reset to fix this issue.
 	 * This is a hardware bug, and will be fix in the
 	 * next sai version.
+	 *
+	 * In consumer mode, this can happen even after a
+	 * single open/close, especially if both tx and rx
+	 * are running concurrently.
 	 */
-	if (!sai->is_slave_mode) {
-		/* Software Reset */
-		regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR);
-		/* Clear SR bit to finish the reset */
-		regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0);
-	}
+	/* Software Reset */
+	regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), FSL_SAI_CSR_SR);
+	/* Clear SR bit to finish the reset */
+	regmap_write(sai->regmap, FSL_SAI_xCSR(tx, ofs), 0);
 }
 
 static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
author maintainer
#43 lore raw

PATCH 43/403 virtio-net: ensure the received length does not exceed allocated size

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bui Quang Minh <[email protected]>

commit 315dbdd7cdf6aa533829774caaf4d25f1fd20e73 upstream.

In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check.

Fixes 4941d472bf95 ("virtio-net: do not reset during XDP set")
[ adapted virtqueue_get_buf() to virtqueue_get_buf_ctx() ]
---
 drivers/net/virtio_net.c |   38 ++++++++++++++++++++++++++++++++++----
 1 file changed, 34 insertions(+), 4 deletions(-)
drivers/net/virtio_net.c +34 -4
@@ -394,6 +394,26 @@ static unsigned int mergeable_ctx_to_tru
 	return (unsigned long)mrg_ctx & ((1 << MRG_CTX_HEADER_SHIFT) - 1);
 }
 
+static int check_mergeable_len(struct net_device *dev, void *mrg_ctx,
+			       unsigned int len)
+{
+	unsigned int headroom, tailroom, room, truesize;
+
+	truesize = mergeable_ctx_to_truesize(mrg_ctx);
+	headroom = mergeable_ctx_to_headroom(mrg_ctx);
+	tailroom = headroom ? sizeof(struct skb_shared_info) : 0;
+	room = SKB_DATA_ALIGN(headroom + tailroom);
+
+	if (len > truesize - room) {
+		pr_debug("%s: rx error: len %u exceeds truesize %lu\n",
+			 dev->name, len, (unsigned long)(truesize - room));
+		dev->stats.rx_length_errors++;
+		return -1;
+	}
+
+	return 0;
+}
+
 /* Called from bottom half context */
 static struct sk_buff *page_to_skb(struct virtnet_info *vi,
 				   struct receive_queue *rq,
@@ -639,7 +659,8 @@ static unsigned int virtnet_get_headroom
  * across multiple buffers (num_buf > 1), and we make sure buffers
  * have enough headroom.
  */
-static struct page *xdp_linearize_page(struct receive_queue *rq,
+static struct page *xdp_linearize_page(struct net_device *dev,
+				       struct receive_queue *rq,
 				       u16 *num_buf,
 				       struct page *p,
 				       int offset,
@@ -659,18 +680,27 @@ static struct page *xdp_linearize_page(s
 	memcpy(page_address(page) + page_off, page_address(p) + offset, *len);
 	page_off += *len;
 
+	/* Only mergeable mode can go inside this while loop. In small mode,
+	 * *num_buf == 1, so it cannot go inside.
+	 */
 	while (--*num_buf) {
 		unsigned int buflen;
 		void *buf;
+		void *ctx;
 		int off;
 
-		buf = virtqueue_get_buf(rq->vq, &buflen);
+		buf = virtqueue_get_buf_ctx(rq->vq, &buflen, &ctx);
 		if (unlikely(!buf))
 			goto err_buf;
 
 		p = virt_to_head_page(buf);
 		off = buf - page_address(p);
 
+		if (check_mergeable_len(dev, ctx, buflen)) {
+			put_page(p);
+			goto err_buf;
+		}
+
 		/* guard against a misconfigured or uncooperative backend that
 		 * is sending packet larger than the MTU.
 		 */
@@ -745,7 +775,7 @@ static struct sk_buff *receive_small(str
 			headroom = vi->hdr_len + header_offset;
 			buflen = SKB_DATA_ALIGN(GOOD_PACKET_LEN + headroom) +
 				 SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
-			xdp_page = xdp_linearize_page(rq, &num_buf, page,
+			xdp_page = xdp_linearize_page(dev, rq, &num_buf, page,
 						      offset, header_offset,
 						      &tlen);
 			if (!xdp_page)
@@ -910,7 +940,7 @@ static struct sk_buff *receive_mergeable
 		if (unlikely(num_buf > 1 ||
 			     headroom < virtnet_get_headroom(vi))) {
 			/* linearize data for XDP */
-			xdp_page = xdp_linearize_page(rq, &num_buf,
+			xdp_page = xdp_linearize_page(dev, rq, &num_buf,
 						      page, offset,
 						      VIRTIO_XDP_HEADROOM,
 						      &len);
author maintainer
#44 lore raw

PATCH 44/403 xhci: Disable stream for xHC controller with XHCI_BROKEN_STREAMS

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hongyu Xie <[email protected]>

commit cd65ee81240e8bc3c3119b46db7f60c80864b90b upstream.

Disable stream for platform xHC controller with broken stream.

Fixes 14aec589327a6 ("storage: accept some UAS devices if streams are unavailable")
Cc stable <[email protected]>
[ removed xhci_get_usb3_hcd() call ]
---
 drivers/usb/host/xhci-plat.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-plat.c +2 -1
@@ -333,7 +333,8 @@ static int xhci_plat_probe(struct platfo
 	if (ret)
 		goto disable_usb_phy;
 
-	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
+	if (HCC_MAX_PSA(xhci->hcc_params) >= 4 &&
+	    !(xhci->quirks & XHCI_BROKEN_STREAMS))
 		xhci->shared_hcd->can_do_streams = 1;
 
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
author maintainer
#45 lore raw

PATCH 45/403 power: supply: bq24190_charger: Fix runtime PM imbalance on error

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dinghao Liu <[email protected]>

[ Upstream commit 1a37a039711610dd53ec03d8cab9e81875338225 ]

pm_runtime_get_sync() increments the runtime PM usage counter even it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

Stable-dep-of: 47c29d692129 ("power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition")

---
 drivers/power/supply/bq24190_charger.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/power/supply/bq24190_charger.c +3 -1
@@ -484,8 +484,10 @@ static ssize_t bq24190_sysfs_store(struc
 		return ret;
 
 	ret = pm_runtime_get_sync(bdi->dev);
-	if (ret < 0)
+	if (ret < 0) {
+		pm_runtime_put_noidle(bdi->dev);
 		return ret;
+	}
 
 	ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
 	if (ret)
author maintainer
#46 lore raw

PATCH 46/403 power: supply: bq24190_charger: using pm_runtime_resume_and_get instead of pm_runtime_get_sync

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Minghao Chi <[email protected]>

[ Upstream commit d96a89407e5f682d1cb22569d91784506c784863 ]

Using pm_runtime_resume_and_get is more appropriate for simplifing code

[ skulkarni: Minor changes in hunk #3/12 wrt the mainline commit ]

Stable-dep-of: 47c29d692129 ("power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition")

---
 drivers/power/supply/bq24190_charger.c |   63 +++++++++++----------------------
 1 file changed, 21 insertions(+), 42 deletions(-)
drivers/power/supply/bq24190_charger.c +21 -42
@@ -448,11 +448,9 @@ static ssize_t bq24190_sysfs_show(struct
 	if (!info)
 		return -EINVAL;
 
-	ret = pm_runtime_get_sync(bdi->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(bdi->dev);
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
 	if (ret)
@@ -483,11 +481,9 @@ static ssize_t bq24190_sysfs_store(struc
 	if (ret < 0)
 		return ret;
 
-	ret = pm_runtime_get_sync(bdi->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(bdi->dev);
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
 	if (ret)
@@ -506,10 +502,9 @@ static int bq24190_set_charge_mode(struc
 	struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
 	int ret;
 
-	ret = pm_runtime_get_sync(bdi->dev);
+	ret = pm_runtime_resume_and_get(bdi->dev);
 	if (ret < 0) {
 		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
-		pm_runtime_put_noidle(bdi->dev);
 		return ret;
 	}
 
@@ -539,10 +534,9 @@ static int bq24190_vbus_is_enabled(struc
 	int ret;
 	u8 val;
 
-	ret = pm_runtime_get_sync(bdi->dev);
+	ret = pm_runtime_resume_and_get(bdi->dev);
 	if (ret < 0) {
 		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
-		pm_runtime_put_noidle(bdi->dev);
 		return ret;
 	}
 
@@ -1083,11 +1077,9 @@ static int bq24190_charger_get_property(
 
 	dev_dbg(bdi->dev, "prop: %d\n", psp);
 
-	ret = pm_runtime_get_sync(bdi->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(bdi->dev);
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_CHARGE_TYPE:
@@ -1157,11 +1149,9 @@ static int bq24190_charger_set_property(
 
 	dev_dbg(bdi->dev, "prop: %d\n", psp);
 
-	ret = pm_runtime_get_sync(bdi->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(bdi->dev);
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
@@ -1431,11 +1421,9 @@ static int bq24190_battery_get_property(
 	dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
 	dev_dbg(bdi->dev, "prop: %d\n", psp);
 
-	ret = pm_runtime_get_sync(bdi->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(bdi->dev);
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
@@ -1479,11 +1467,9 @@ static int bq24190_battery_set_property(
 	dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
 	dev_dbg(bdi->dev, "prop: %d\n", psp);
 
-	ret = pm_runtime_get_sync(bdi->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(bdi->dev);
+	ret = pm_runtime_resume_and_get(bdi->dev);
+	if (ret < 0)
 		return ret;
-	}
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_ONLINE:
@@ -1637,10 +1623,9 @@ static irqreturn_t bq24190_irq_handler_t
 	int error;
 
 	bdi->irq_event = true;
-	error = pm_runtime_get_sync(bdi->dev);
+	error = pm_runtime_resume_and_get(bdi->dev);
 	if (error < 0) {
 		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
-		pm_runtime_put_noidle(bdi->dev);
 		return IRQ_NONE;
 	}
 	bq24190_check_status(bdi);
@@ -1860,11 +1845,9 @@ static int bq24190_remove(struct i2c_cli
 	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
 	int error;
 
-	error = pm_runtime_get_sync(bdi->dev);
-	if (error < 0) {
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
 		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
-		pm_runtime_put_noidle(bdi->dev);
-	}
 
 	bq24190_register_reset(bdi);
 	if (bdi->battery)
@@ -1913,11 +1896,9 @@ static __maybe_unused int bq24190_pm_sus
 	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
 	int error;
 
-	error = pm_runtime_get_sync(bdi->dev);
-	if (error < 0) {
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
 		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
-		pm_runtime_put_noidle(bdi->dev);
-	}
 
 	bq24190_register_reset(bdi);
 
@@ -1938,11 +1919,9 @@ static __maybe_unused int bq24190_pm_res
 	bdi->f_reg = 0;
 	bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
 
-	error = pm_runtime_get_sync(bdi->dev);
-	if (error < 0) {
+	error = pm_runtime_resume_and_get(bdi->dev);
+	if (error < 0)
 		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
-		pm_runtime_put_noidle(bdi->dev);
-	}
 
 	bq24190_register_reset(bdi);
 	bq24190_set_config(bdi);
author maintainer
#47 lore raw

PATCH 47/403 power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zheng Wang <[email protected]>

[ Upstream commit 47c29d69212911f50bdcdd0564b5999a559010d4 ]

In bq24190_probe, &bdi->input_current_limit_work is bound with bq24190_input_current_limit_work. When external power changed, it will call bq24190_charger_external_power_changed
to start the work.

If we remove the module which will call bq24190_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows:

CPU0 CPUc1

                    |bq24190_input_current_limit_work

bq24190_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|

kfree(psy)          |
                    |
                    | power_supply_get_property_from_supplier
                    |   //use

Fix it by finishing the work before cleanup in the bq24190_remove

Fixes 97774672573a ("power_supply: Initialize changed_work before calling device_add")
---
 drivers/power/supply/bq24190_charger.c |    1 +
 1 file changed, 1 insertion(+)
drivers/power/supply/bq24190_charger.c +1 -0
@@ -1845,6 +1845,7 @@ static int bq24190_remove(struct i2c_cli
 	struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
 	int error;
 
+	cancel_delayed_work_sync(&bdi->input_current_limit_work);
 	error = pm_runtime_resume_and_get(bdi->dev);
 	if (error < 0)
 		dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
author maintainer
#48 lore raw

PATCH 48/403 net_sched: sch_sfq: annotate data-races around q->perturb_period

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit a17ef9e6c2c1cf0fc6cd6ca6a9ce525c67d1da7f ]

sfq_perturbation() reads q->perturb_period locklessly. Add annotations to fix potential issues.

[ Harshit: Backport to 5.4.y, conflicts resolved due to missing commit:
d636fc5dd692 ("net: sched: add rcu annotations around qdisc->qdisc_sleeping")in 5.4.y ]

---
 net/sched/sch_sfq.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
net/sched/sch_sfq.c +9 -4
@@ -611,6 +611,7 @@ static void sfq_perturbation(struct time
 	struct Qdisc *sch = q->sch;
 	spinlock_t *root_lock = qdisc_lock(qdisc_root_sleeping(sch));
 	siphash_key_t nkey;
+	int period;
 
 	get_random_bytes(&nkey, sizeof(nkey));
 	spin_lock(root_lock);
@@ -619,8 +620,12 @@ static void sfq_perturbation(struct time
 		sfq_rehash(sch);
 	spin_unlock(root_lock);
 
-	if (q->perturb_period)
-		mod_timer(&q->perturb_timer, jiffies + q->perturb_period);
+	/* q->perturb_period can change under us from
+	 * sfq_change() and sfq_destroy().
+	 */
+	period = READ_ONCE(q->perturb_period);
+	if (period)
+		mod_timer(&q->perturb_timer, jiffies + period);
 }
 
 static int sfq_change(struct Qdisc *sch, struct nlattr *opt)
@@ -662,7 +667,7 @@ static int sfq_change(struct Qdisc *sch,
 		q->quantum = ctl->quantum;
 		q->scaled_quantum = SFQ_ALLOT_SIZE(q->quantum);
 	}
-	q->perturb_period = ctl->perturb_period * HZ;
+	WRITE_ONCE(q->perturb_period, ctl->perturb_period * HZ);
 	if (ctl->flows)
 		q->maxflows = min_t(u32, ctl->flows, SFQ_MAX_FLOWS);
 	if (ctl->divisor) {
@@ -724,7 +729,7 @@ static void sfq_destroy(struct Qdisc *sc
 	struct sfq_sched_data *q = qdisc_priv(sch);
 
 	tcf_block_put(q->block);
-	q->perturb_period = 0;
+	WRITE_ONCE(q->perturb_period, 0);
 	del_timer_sync(&q->perturb_timer);
 	sfq_free(q->ht);
 	sfq_free(q->slots);
author maintainer
#49 lore raw

PATCH 49/403 net_sched: sch_sfq: handle bigger packets

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit e4650d7ae4252f67e997a632adfae0dd74d3a99a ]

SFQ has an assumption on dealing with packets smaller than 64KB.

Even before BIG TCP, TCA_STAB can provide arbitrary big values in qdisc_pkt_len(skb)

It is time to switch (struct sfq_slot)->allot to a 32bit field.

sizeof(struct sfq_slot) is now 64 bytes, giving better cache locality.

---
 net/sched/sch_sfq.c |   39 +++++++++++++--------------------------
 1 file changed, 13 insertions(+), 26 deletions(-)
net/sched/sch_sfq.c +13 -26
@@ -77,12 +77,6 @@
 #define SFQ_EMPTY_SLOT		0xffff
 #define SFQ_DEFAULT_HASH_DIVISOR 1024
 
-/* We use 16 bits to store allot, and want to handle packets up to 64K
- * Scale allot by 8 (1<<3) so that no overflow occurs.
- */
-#define SFQ_ALLOT_SHIFT		3
-#define SFQ_ALLOT_SIZE(X)	DIV_ROUND_UP(X, 1 << SFQ_ALLOT_SHIFT)
-
 /* This type should contain at least SFQ_MAX_DEPTH + 1 + SFQ_MAX_FLOWS values */
 typedef u16 sfq_index;
 
@@ -104,7 +98,7 @@ struct sfq_slot {
 	sfq_index	next; /* next slot in sfq RR chain */
 	struct sfq_head dep; /* anchor in dep[] chains */
 	unsigned short	hash; /* hash value (index in ht[]) */
-	short		allot; /* credit for this slot */
+	int		allot; /* credit for this slot */
 
 	unsigned int    backlog;
 	struct red_vars vars;
@@ -120,7 +114,6 @@ struct sfq_sched_data {
 	siphash_key_t 	perturbation;
 	u8		cur_depth;	/* depth of longest slot */
 	u8		flags;
-	unsigned short  scaled_quantum; /* SFQ_ALLOT_SIZE(quantum) */
 	struct tcf_proto __rcu *filter_list;
 	struct tcf_block *block;
 	sfq_index	*ht;		/* Hash table ('divisor' slots) */
@@ -459,7 +452,7 @@ enqueue:
 		 */
 		q->tail = slot;
 		/* We could use a bigger initial quantum for new flows */
-		slot->allot = q->scaled_quantum;
+		slot->allot = q->quantum;
 	}
 	if (++sch->q.qlen <= q->limit)
 		return NET_XMIT_SUCCESS;
@@ -496,7 +489,7 @@ next_slot:
 	slot = &q->slots[a];
 	if (slot->allot <= 0) {
 		q->tail = slot;
-		slot->allot += q->scaled_quantum;
+		slot->allot += q->quantum;
 		goto next_slot;
 	}
 	skb = slot_dequeue_head(slot);
@@ -515,7 +508,7 @@ next_slot:
 		}
 		q->tail->next = next_a;
 	} else {
-		slot->allot -= SFQ_ALLOT_SIZE(qdisc_pkt_len(skb));
+		slot->allot -= qdisc_pkt_len(skb);
 	}
 	return skb;
 }
@@ -598,7 +591,7 @@ drop:
 				q->tail->next = x;
 			}
 			q->tail = slot;
-			slot->allot = q->scaled_quantum;
+			slot->allot = q->quantum;
 		}
 	}
 	sch->q.qlen -= dropped;
@@ -628,7 +621,8 @@ static void sfq_perturbation(struct time
 		mod_timer(&q->perturb_timer, jiffies + period);
 }
 
-static int sfq_change(struct Qdisc *sch, struct nlattr *opt)
+static int sfq_change(struct Qdisc *sch, struct nlattr *opt,
+		      struct netlink_ext_ack *extack)
 {
 	struct sfq_sched_data *q = qdisc_priv(sch);
 	struct tc_sfq_qopt *ctl = nla_data(opt);
@@ -646,14 +640,10 @@ static int sfq_change(struct Qdisc *sch,
 	    (!is_power_of_2(ctl->divisor) || ctl->divisor > 65536))
 		return -EINVAL;
 
-	/* slot->allot is a short, make sure quantum is not too big. */
-	if (ctl->quantum) {
-		unsigned int scaled = SFQ_ALLOT_SIZE(ctl->quantum);
-
-		if (scaled <= 0 || scaled > SHRT_MAX)
-			return -EINVAL;
+	if ((int)ctl->quantum < 0) {
+		NL_SET_ERR_MSG_MOD(extack, "invalid quantum");
+		return -EINVAL;
 	}
-
 	if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max,
 					ctl_v1->Wlog, ctl_v1->Scell_log, NULL))
 		return -EINVAL;
@@ -663,10 +653,8 @@ static int sfq_change(struct Qdisc *sch,
 			return -ENOMEM;
 	}
 	sch_tree_lock(sch);
-	if (ctl->quantum) {
+	if (ctl->quantum)
 		q->quantum = ctl->quantum;
-		q->scaled_quantum = SFQ_ALLOT_SIZE(q->quantum);
-	}
 	WRITE_ONCE(q->perturb_period, ctl->perturb_period * HZ);
 	if (ctl->flows)
 		q->maxflows = min_t(u32, ctl->flows, SFQ_MAX_FLOWS);
@@ -762,12 +750,11 @@ static int sfq_init(struct Qdisc *sch, s
 	q->divisor = SFQ_DEFAULT_HASH_DIVISOR;
 	q->maxflows = SFQ_DEFAULT_FLOWS;
 	q->quantum = psched_mtu(qdisc_dev(sch));
-	q->scaled_quantum = SFQ_ALLOT_SIZE(q->quantum);
 	q->perturb_period = 0;
 	get_random_bytes(&q->perturbation, sizeof(q->perturbation));
 
 	if (opt) {
-		int err = sfq_change(sch, opt);
+		int err = sfq_change(sch, opt, extack);
 		if (err)
 			return err;
 	}
@@ -878,7 +865,7 @@ static int sfq_dump_class_stats(struct Q
 	if (idx != SFQ_EMPTY_SLOT) {
 		const struct sfq_slot *slot = &q->slots[idx];
 
-		xstats.allot = slot->allot << SFQ_ALLOT_SHIFT;
+		xstats.allot = slot->allot;
 		qs.qlen = slot->qlen;
 		qs.backlog = slot->backlog;
 	}
author maintainer
#50 lore raw

PATCH 50/403 net_sched: sch_sfq: dont allow 1 packet limit

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Octavian Purdila <[email protected]>

[ Upstream commit 10685681bafce6febb39770f3387621bf5d67d0b ]

The current implementation does not work correctly with a limit of
1. iproute2 actually checks for this and this patch adds the check in kernel as well.

This fixes the following syzkaller reported crash:

UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
  __dump_stack lib/dump_stack.c:79 [inline]
  dump_stack+0x125/0x19f lib/dump_stack.c:120
  ubsan_epilogue lib/ubsan.c:148 [inline]
  __ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347
  sfq_link net/sched/sch_sfq.c:210 [inline]
  sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238
  sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500
  sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525
  qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
  tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319
  qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
  dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296
  netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline]
  dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362
  __dev_close_many+0x214/0x350 net/core/dev.c:1468
  dev_close_many+0x207/0x510 net/core/dev.c:1506
  unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738
  unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695
  unregister_netdevice include/linux/netdevice.h:2893 [inline]
  __tun_detach+0x6b6/0x1600 drivers/net/tun.c:689
  tun_detach drivers/net/tun.c:705 [inline]
  tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640
  __fput+0x203/0x840 fs/file_table.c:280
  task_work_run+0x129/0x1b0 kernel/task_work.c:185
  exit_task_work include/linux/task_work.h:33 [inline]
  do_exit+0x5ce/0x2200 kernel/exit.c:931
  do_group_exit+0x144/0x310 kernel/exit.c:1046
  __do_sys_exit_group kernel/exit.c:1057 [inline]
  __se_sys_exit_group kernel/exit.c:1055 [inline]
  __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055
 do_syscall_64+0x6c/0xd0
 entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fe5e7b52479
Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f.
RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0
R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270

The crash can be also be reproduced with the following (with a tc recompiled to allow for sfq limits of 1):

tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s ../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1 ifconfig dummy0 up
ping -I dummy0 -f -c2 -W0.1 8.8.8.8
sleep 1

Scenario that triggers the crash:

* the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1

* TBF dequeues: it peeks from SFQ which moves the packet to the gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so it schedules itself for later.

* the second packet is sent and TBF tries to queues it to SFQ. qdisc qlen is now 2 and because the SFQ limit is 1 the packet is dropped by SFQ. At this point qlen is 1, and all of the SFQ slots are empty, however q->tail is not NULL.

At this point, assuming no more packets are queued, when sch_dequeue runs again it will decrement the qlen for the current empty slot causing an underflow and the subsequent out of bounds access.

---
 net/sched/sch_sfq.c |    4 ++++
 1 file changed, 4 insertions(+)
net/sched/sch_sfq.c +4 -0
@@ -652,6 +652,10 @@ static int sfq_change(struct Qdisc *sch,
 		if (!p)
 			return -ENOMEM;
 	}
+	if (ctl->limit == 1) {
+		NL_SET_ERR_MSG_MOD(extack, "invalid limit");
+		return -EINVAL;
+	}
 	sch_tree_lock(sch);
 	if (ctl->quantum)
 		q->quantum = ctl->quantum;
author maintainer
#51 lore raw

PATCH 51/403 net_sched: sch_sfq: use a temporary work area for validating configuration

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Octavian Purdila <[email protected]>

[ Upstream commit 8c0cea59d40cf6dd13c2950437631dd614fbade6 ]

Many configuration parameters have influence on others (e.g. divisor -> flows -> limit, depth -> limit) and so it is difficult to correctly do all of the validation before applying the configuration. And if a validation error is detected late it is difficult to roll back a partially applied configuration.

To avoid these issues use a temporary work area to update and validate the configuration and only then apply the configuration to the internal state.

---
 net/sched/sch_sfq.c |   56 ++++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 44 insertions(+), 12 deletions(-)
net/sched/sch_sfq.c +44 -12
@@ -631,6 +631,15 @@ static int sfq_change(struct Qdisc *sch,
 	struct red_parms *p = NULL;
 	struct sk_buff *to_free = NULL;
 	struct sk_buff *tail = NULL;
+	unsigned int maxflows;
+	unsigned int quantum;
+	unsigned int divisor;
+	int perturb_period;
+	u8 headdrop;
+	u8 maxdepth;
+	int limit;
+	u8 flags;
+
 
 	if (opt->nla_len < nla_attr_size(sizeof(*ctl)))
 		return -EINVAL;
@@ -656,36 +665,59 @@ static int sfq_change(struct Qdisc *sch,
 		NL_SET_ERR_MSG_MOD(extack, "invalid limit");
 		return -EINVAL;
 	}
+
 	sch_tree_lock(sch);
+
+	limit = q->limit;
+	divisor = q->divisor;
+	headdrop = q->headdrop;
+	maxdepth = q->maxdepth;
+	maxflows = q->maxflows;
+	perturb_period = q->perturb_period;
+	quantum = q->quantum;
+	flags = q->flags;
+
+	/* update and validate configuration */
 	if (ctl->quantum)
-		q->quantum = ctl->quantum;
-	WRITE_ONCE(q->perturb_period, ctl->perturb_period * HZ);
+		quantum = ctl->quantum;
+	perturb_period = ctl->perturb_period * HZ;
 	if (ctl->flows)
-		q->maxflows = min_t(u32, ctl->flows, SFQ_MAX_FLOWS);
+		maxflows = min_t(u32, ctl->flows, SFQ_MAX_FLOWS);
 	if (ctl->divisor) {
-		q->divisor = ctl->divisor;
-		q->maxflows = min_t(u32, q->maxflows, q->divisor);
+		divisor = ctl->divisor;
+		maxflows = min_t(u32, maxflows, divisor);
 	}
 	if (ctl_v1) {
 		if (ctl_v1->depth)
-			q->maxdepth = min_t(u32, ctl_v1->depth, SFQ_MAX_DEPTH);
+			maxdepth = min_t(u32, ctl_v1->depth, SFQ_MAX_DEPTH);
 		if (p) {
-			swap(q->red_parms, p);
-			red_set_parms(q->red_parms,
+			red_set_parms(p,
 				      ctl_v1->qth_min, ctl_v1->qth_max,
 				      ctl_v1->Wlog,
 				      ctl_v1->Plog, ctl_v1->Scell_log,
 				      NULL,
 				      ctl_v1->max_P);
 		}
-		q->flags = ctl_v1->flags;
-		q->headdrop = ctl_v1->headdrop;
+		flags = ctl_v1->flags;
+		headdrop = ctl_v1->headdrop;
 	}
 	if (ctl->limit) {
-		q->limit = min_t(u32, ctl->limit, q->maxdepth * q->maxflows);
-		q->maxflows = min_t(u32, q->maxflows, q->limit);
+		limit = min_t(u32, ctl->limit, maxdepth * maxflows);
+		maxflows = min_t(u32, maxflows, limit);
 	}
 
+	/* commit configuration */
+	q->limit = limit;
+	q->divisor = divisor;
+	q->headdrop = headdrop;
+	q->maxdepth = maxdepth;
+	q->maxflows = maxflows;
+	WRITE_ONCE(q->perturb_period, perturb_period);
+	q->quantum = quantum;
+	q->flags = flags;
+	if (p)
+		swap(q->red_parms, p);
+
 	qlen = sch->q.qlen;
 	while (sch->q.qlen > q->limit) {
 		dropped += sfq_drop(sch, &to_free);
author maintainer
#52 lore raw

PATCH 52/403 net_sched: sch_sfq: move the limit validation

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Octavian Purdila <[email protected]>

[ Upstream commit b3bf8f63e6179076b57c9de660c9f80b5abefe70 ]

It is not sufficient to directly validate the limit on the data that the user passes as it can be updated based on how the other parameters are changed.

Move the check at the end of the configuration update process to also catch scenarios where the limit is indirectly updated, for example with the following configurations:

tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 depth 1 tc qdisc add dev dummy0 handle 1: root sfq limit 2 flows 1 divisor 1

This fixes the following syzkaller reported crash:

------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:203:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 1 UID: 0 PID: 3037 Comm: syz.2.16 Not tainted 6.14.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/27/2024
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x201/0x300 lib/dump_stack.c:120
 ubsan_epilogue lib/ubsan.c:231 [inline]
 __ubsan_handle_out_of_bounds+0xf5/0x120 lib/ubsan.c:429
 sfq_link net/sched/sch_sfq.c:203 [inline]
 sfq_dec+0x53c/0x610 net/sched/sch_sfq.c:231
 sfq_dequeue+0x34e/0x8c0 net/sched/sch_sfq.c:493
 sfq_reset+0x17/0x60 net/sched/sch_sfq.c:518
 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035
 tbf_reset+0x41/0x110 net/sched/sch_tbf.c:339
 qdisc_reset+0x12e/0x600 net/sched/sch_generic.c:1035
 dev_reset_queue+0x100/0x1b0 net/sched/sch_generic.c:1311
 netdev_for_each_tx_queue include/linux/netdevice.h:2590 [inline]
 dev_deactivate_many+0x7e5/0xe70 net/sched/sch_generic.c:1375
Fixes 10685681bafc ("net_sched: sch_sfq: don't allow 1 packet limit")
---
 net/sched/sch_sfq.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
net/sched/sch_sfq.c +6 -4
@@ -661,10 +661,6 @@ static int sfq_change(struct Qdisc *sch,
 		if (!p)
 			return -ENOMEM;
 	}
-	if (ctl->limit == 1) {
-		NL_SET_ERR_MSG_MOD(extack, "invalid limit");
-		return -EINVAL;
-	}
 
 	sch_tree_lock(sch);
 
@@ -705,6 +701,12 @@ static int sfq_change(struct Qdisc *sch,
 		limit = min_t(u32, ctl->limit, maxdepth * maxflows);
 		maxflows = min_t(u32, maxflows, limit);
 	}
+	if (limit == 1) {
+		sch_tree_unlock(sch);
+		kfree(p);
+		NL_SET_ERR_MSG_MOD(extack, "invalid limit");
+		return -EINVAL;
+	}
 
 	/* commit configuration */
 	q->limit = limit;
author maintainer
#53 lore raw

PATCH 53/403 net_sched: sch_sfq: reject invalid perturb period

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit 7ca52541c05c832d32b112274f81a985101f9ba8 ]

Gerrard Tai reported that SFQ perturb_period has no range check yet, and this can be used to trigger a race condition fixed in a separate patch.

We want to make sure ctl->perturb_period * HZ will not overflow and is positive.

Tested:

tc qd add dev lo root sfq perturb -10 # negative value : error
Error: sch_sfq: invalid perturb period.

tc qd add dev lo root sfq perturb 1000000000 # too big : error
Error: sch_sfq: invalid perturb period.

tc qd add dev lo root sfq perturb 2000000 # acceptable value
tc -s -d qd sh dev lo
qdisc sfq 8005: root refcnt 2 limit 127p quantum 64Kb depth 127 flows 128 divisor 1024 perturb 2000000sec
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0

---
 net/sched/sch_sfq.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)
net/sched/sch_sfq.c +8 -2
@@ -653,6 +653,14 @@ static int sfq_change(struct Qdisc *sch,
 		NL_SET_ERR_MSG_MOD(extack, "invalid quantum");
 		return -EINVAL;
 	}
+
+	if (ctl->perturb_period < 0 ||
+	    ctl->perturb_period > INT_MAX / HZ) {
+		NL_SET_ERR_MSG_MOD(extack, "invalid perturb period");
+		return -EINVAL;
+	}
+	perturb_period = ctl->perturb_period * HZ;
+
 	if (ctl_v1 && !red_check_params(ctl_v1->qth_min, ctl_v1->qth_max,
 					ctl_v1->Wlog, ctl_v1->Scell_log, NULL))
 		return -EINVAL;
@@ -669,14 +677,12 @@ static int sfq_change(struct Qdisc *sch,
 	headdrop = q->headdrop;
 	maxdepth = q->maxdepth;
 	maxflows = q->maxflows;
-	perturb_period = q->perturb_period;
 	quantum = q->quantum;
 	flags = q->flags;
 
 	/* update and validate configuration */
 	if (ctl->quantum)
 		quantum = ctl->quantum;
-	perturb_period = ctl->perturb_period * HZ;
 	if (ctl->flows)
 		maxflows = min_t(u32, ctl->flows, SFQ_MAX_FLOWS);
 	if (ctl->divisor) {
author maintainer
#54 lore raw

PATCH 54/403 usb: hub: fix detection of high tier USB3 devices behind suspended hubs

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <[email protected]>

commit 8f5b7e2bec1c36578fdaa74a6951833541103e27 upstream.

USB3 devices connected behind several external suspended hubs may not be detected when plugged in due to aggressive hub runtime pm suspend.

The hub driver immediately runtime-suspends hubs if there are no active children or port activity.

There is a delay between the wake signal causing hub resume, and driver visible port activity on the hub downstream facing ports. Most of the LFPS handshake, resume signaling and link training done on the downstream ports is not visible to the hub driver until completed, when device then will appear fully enabled and running on the port.

This delay between wake signal and detectable port change is even more significant with chained suspended hubs where the wake signal will propagate upstream first. Suspended hubs will only start resuming downstream ports after upstream facing port resumes.

The hub driver may resume a USB3 hub, read status of all ports, not yet see any activity, and runtime suspend back the hub before any port activity is visible.

This exact case was seen when conncting USB3 devices to a suspended Thunderbolt dock.

USB3 specification defines a 100ms tU3WakeupRetryDelay, indicating USB3 devices expect to be resumed within 100ms after signaling wake. if not then device will resend the wake signal.

Give the USB3 hubs twice this time (200ms) to detect any port changes after resume, before allowing hub to runtime suspend again.

Cc stable <[email protected]>
Fixes 2839f5bcfcfc ("USB: Turn on auto-suspend for USB 3.0 hubs.")
[ replaced hub_get/hub_put wrapper functions with direct kref_get/kref_put calls ]
---
 drivers/usb/core/hub.c |   33 ++++++++++++++++++++++++++++++++-
 1 file changed, 32 insertions(+), 1 deletion(-)
drivers/usb/core/hub.c +32 -1
@@ -51,6 +51,12 @@
 #define USB_TP_TRANSMISSION_DELAY_MAX	65535	/* ns */
 #define USB_PING_RESPONSE_TIME		400	/* ns */
 
+/*
+ * Give SS hubs 200ms time after wake to train downstream links before
+ * assuming no port activity and allowing hub to runtime suspend back.
+ */
+#define USB_SS_PORT_U0_WAKE_TIME	200  /* ms */
+
 /* Protect struct usb_device->state and ->children members
  * Note: Both are also protected by ->dev.sem, except that ->state can
  * change to USB_STATE_NOTATTACHED even when the semaphore isn't held. */
@@ -1024,11 +1030,12 @@ int usb_remove_device(struct usb_device
 
 enum hub_activation_type {
 	HUB_INIT, HUB_INIT2, HUB_INIT3,		/* INITs must come first */
-	HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME,
+	HUB_POST_RESET, HUB_RESUME, HUB_RESET_RESUME, HUB_POST_RESUME,
 };
 
 static void hub_init_func2(struct work_struct *ws);
 static void hub_init_func3(struct work_struct *ws);
+static void hub_post_resume(struct work_struct *ws);
 
 static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 {
@@ -1051,6 +1058,13 @@ static void hub_activate(struct usb_hub
 			goto init2;
 		goto init3;
 	}
+
+	if (type == HUB_POST_RESUME) {
+		usb_autopm_put_interface_async(to_usb_interface(hub->intfdev));
+		kref_put(&hub->kref, hub_release);
+		return;
+	}
+
 	kref_get(&hub->kref);
 
 	/* The superspeed hub except for root hub has to use Hub Depth
@@ -1299,6 +1313,16 @@ static void hub_activate(struct usb_hub
 		device_unlock(&hdev->dev);
 	}
 
+	if (type == HUB_RESUME && hub_is_superspeed(hub->hdev)) {
+		/* give usb3 downstream links training time after hub resume */
+		INIT_DELAYED_WORK(&hub->init_work, hub_post_resume);
+		queue_delayed_work(system_power_efficient_wq, &hub->init_work,
+				   msecs_to_jiffies(USB_SS_PORT_U0_WAKE_TIME));
+		usb_autopm_get_interface_no_resume(
+			to_usb_interface(hub->intfdev));
+		return;
+	}
+
 	kref_put(&hub->kref, hub_release);
 }
 
@@ -1317,6 +1341,13 @@ static void hub_init_func3(struct work_s
 	hub_activate(hub, HUB_INIT3);
 }
 
+static void hub_post_resume(struct work_struct *ws)
+{
+	struct usb_hub *hub = container_of(ws, struct usb_hub, init_work.work);
+
+	hub_activate(hub, HUB_POST_RESUME);
+}
+
 enum hub_quiescing_type {
 	HUB_DISCONNECT, HUB_PRE_RESET, HUB_SUSPEND
 };
author maintainer
#55 lore raw

PATCH 55/403 usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathias Nyman <[email protected]>

commit a49e1e2e785fb3621f2d748581881b23a364998a upstream.

Delayed work to prevent USB3 hubs from runtime-suspending immediately after resume was added in commit 8f5b7e2bec1c ("usb: hub: fix detection of high tier USB3 devices behind suspended hubs").

This delayed work needs be flushed if system suspends, or hub needs to be quiesced for other reasons right after resume. Not flushing it triggered issues on QC SC8280XP CRD board during suspend/resume testing.

Fix it by flushing the delayed resume work in hub_quiesce()

The delayed work item that allow hub runtime suspend is also scheduled just before calling autopm get. Alan pointed out there is a small risk that work is run before autopm get, which would call autopm put before get, and mess up the runtime pm usage order.
Swap the order of work sheduling and calling autopm get to solve this.

---
 drivers/usb/core/hub.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/usb/core/hub.c +4 -2
@@ -1315,11 +1315,12 @@ static void hub_activate(struct usb_hub
 
 	if (type == HUB_RESUME && hub_is_superspeed(hub->hdev)) {
 		/* give usb3 downstream links training time after hub resume */
+		usb_autopm_get_interface_no_resume(
+			to_usb_interface(hub->intfdev));
+
 		INIT_DELAYED_WORK(&hub->init_work, hub_post_resume);
 		queue_delayed_work(system_power_efficient_wq, &hub->init_work,
 				   msecs_to_jiffies(USB_SS_PORT_U0_WAKE_TIME));
-		usb_autopm_get_interface_no_resume(
-			to_usb_interface(hub->intfdev));
 		return;
 	}
 
@@ -1373,6 +1374,7 @@ static void hub_quiesce(struct usb_hub *
 
 	/* Stop hub_wq and related activity */
 	del_timer_sync(&hub->irq_urb_retry);
+	flush_delayed_work(&hub->init_work);
 	usb_kill_urb(hub->urb);
 	if (hub->has_indicators)
 		cancel_delayed_work_sync(&hub->leds);
author maintainer
#56 lore raw

PATCH 56/403 regulator: core: fix NULL dereference on unbind due to stale coupling data

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alessandro Carminati <[email protected]>

[ Upstream commit ca46946a482238b0cdea459fb82fc837fb36260e ]

Failing to reset coupling_desc.n_coupled after freeing coupled_rdevs can lead to NULL pointer dereference when regulators are accessed post-unbind.

This can happen during runtime PM or other regulator operations that rely on coupling metadata.

For example, on ridesx4, unbinding the 'reg-dummy' platform device triggers a panic in regulator_lock_recursive() due to stale coupling state.

Ensure n_coupled is set to 0 to prevent access to invalid pointers.

---
 drivers/regulator/core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/regulator/core.c +1 -0
index a01a769b2f2d1..e5ce97dc32158 100644
@@ -5062,6 +5062,7 @@ static void regulator_remove_coupling(struct regulator_dev *rdev)
 				 err);
 	}
 
+	rdev->coupling_desc.n_coupled = 0;
 	kfree(rdev->coupling_desc.coupled_rdevs);
 	rdev->coupling_desc.coupled_rdevs = NULL;
 }
Signature · 1 line
2.39.5
author maintainer
#57 lore raw

PATCH 57/403 RDMA/core: Rate limit GID cache warning messages

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Maor Gottlieb <[email protected]>

[ Upstream commit 333e4d79316c9ed5877d7aac8b8ed22efc74e96d ]

The GID cache warning messages can flood the kernel log when there are multiple failed attempts to add GIDs. This can happen when creating many virtual interfaces without having enough space for their GIDs in the GID table.

Change pr_warn to pr_warn_ratelimited to prevent log flooding while still maintaining visibility of the issue.

---
 drivers/infiniband/core/cache.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/infiniband/core/cache.c +2 -2
index 7affe6b4ae210..641e537a0069a 100644
@@ -578,8 +578,8 @@ static int __ib_cache_gid_add(struct ib_device *ib_dev, u8 port,
 out_unlock:
 	mutex_unlock(&table->lock);
 	if (ret)
-		pr_warn("%s: unable to add gid %pI6 error=%d\n",
-			__func__, gid->raw, ret);
+		pr_warn_ratelimited("%s: unable to add gid %pI6 error=%d\n",
+				    __func__, gid->raw, ret);
 	return ret;
 }
 
Signature · 1 line
2.39.5
author maintainer
#58 lore raw

PATCH 58/403 net: appletalk: fix kerneldoc warnings

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <[email protected]>

[ Upstream commit 709565ae14aa2670d6b480be46720856e804af41 ]

net/appletalk/aarp.c:68: warning: Function parameter or member 'dev' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'expires_at' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'hwaddr' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'last_sent' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'next' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'packet_queue' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'status' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'target_addr' not described in 'aarp_entry' net/appletalk/aarp.c:68: warning: Function parameter or member 'xmit_count' not described in 'aarp_entry' net/appletalk/ddp.c:1422: warning: Function parameter or member 'dev' not described in 'atalk_rcv' net/appletalk/ddp.c:1422: warning: Function parameter or member 'orig_dev' not described in 'atalk_rcv' net/appletalk/ddp.c:1422: warning: Function parameter or member 'pt' not described in 'atalk_rcv' net/appletalk/ddp.c:1422: warning: Function parameter or member 'skb' not described in 'atalk_rcv'

Stable-dep-of: 6c4a92d07b08 ("net: appletalk: Fix use-after-free in AARP proxy probe")

---
 net/appletalk/aarp.c | 18 +++++++++---------
 net/appletalk/ddp.c  |  7 ++++---
 2 files changed, 13 insertions(+), 12 deletions(-)
net/appletalk/aarp.c +9 -9
index 45f584171de79..be18af481d7d5 100644
@@ -44,15 +44,15 @@ int sysctl_aarp_resolve_time = AARP_RESOLVE_TIME;
 /* Lists of aarp entries */
 /**
  *	struct aarp_entry - AARP entry
- *	@last_sent - Last time we xmitted the aarp request
- *	@packet_queue - Queue of frames wait for resolution
- *	@status - Used for proxy AARP
- *	expires_at - Entry expiry time
- *	target_addr - DDP Address
- *	dev - Device to use
- *	hwaddr - Physical i/f address of target/router
- *	xmit_count - When this hits 10 we give up
- *	next - Next entry in chain
+ *	@last_sent: Last time we xmitted the aarp request
+ *	@packet_queue: Queue of frames wait for resolution
+ *	@status: Used for proxy AARP
+ *	@expires_at: Entry expiry time
+ *	@target_addr: DDP Address
+ *	@dev:  Device to use
+ *	@hwaddr:  Physical i/f address of target/router
+ *	@xmit_count:  When this hits 10 we give up
+ *	@next: Next entry in chain
  */
 struct aarp_entry {
 	/* These first two are only used for unresolved entries */
net/appletalk/ddp.c +4 -3
index 46ca0f1354fde..01170c4e9c6dd 100644
@@ -1400,9 +1400,10 @@ static int atalk_route_packet(struct sk_buff *skb, struct net_device *dev,
 
 /**
  *	atalk_rcv - Receive a packet (in skb) from device dev
- *	@skb - packet received
- *	@dev - network device where the packet comes from
- *	@pt - packet type
+ *	@skb: packet received
+ *	@dev: network device where the packet comes from
+ *	@pt: packet type
+ *	@orig_dev: the original receive net device
  *
  *	Receive a packet (in skb) from device dev. This has come from the SNAP
  *	decoder, and on entry skb->transport_header is the DDP header, skb->len
Signature · 1 line
2.39.5
author maintainer
#59 lore raw

PATCH 59/403 net: appletalk: Fix use-after-free in AARP proxy probe

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kito Xu (veritas501) <[email protected]>

[ Upstream commit 6c4a92d07b0850342d3becf2e608f805e972467c ]

The AARP proxy‐probe routine (aarp_proxy_probe_network) sends a probe, releases the aarp_lock, sleeps, then re-acquires the lock. During that window an expire timer thread (__aarp_expire_timer) can remove and kfree() the same entry, leading to a use-after-free.

race condition:

         cpu 0                          |            cpu 1
    atalk_sendmsg()                     |   atif_proxy_probe_device()
    aarp_send_ddp()                     |   aarp_proxy_probe_network()
    mod_timer()                         |   lock(aarp_lock) // LOCK!!
    timeout around 200ms                |   alloc(aarp_entry)
    and then call                       |   proxies[hash] = aarp_entry
    aarp_expire_timeout()               |   aarp_send_probe()
                                        |   unlock(aarp_lock) // UNLOCK!!
    lock(aarp_lock) // LOCK!!           |   msleep(100);
    __aarp_expire_timer(&proxies[ct])   |
    free(aarp_entry)                    |
    unlock(aarp_lock) // UNLOCK!!       |
                                        |   lock(aarp_lock) // LOCK!!
                                        |   UAF aarp_entry !!

==================================================================

BUG: KASAN: slab-use-after-free in aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
Read of size 4 at addr ffff8880123aa360 by task repro/13278

CPU: 3 UID: 0 PID: 13278 Comm: repro Not tainted 6.15.2 #3 PREEMPT(full)
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x116/0x1b0 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:408 [inline]
 print_report+0xc1/0x630 mm/kasan/report.c:521
 kasan_report+0xca/0x100 mm/kasan/report.c:634
 aarp_proxy_probe_network+0x560/0x630 net/appletalk/aarp.c:493
 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
 atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818
 sock_do_ioctl+0xdc/0x260 net/socket.c:1190
 sock_ioctl+0x239/0x6a0 net/socket.c:1311
 vfs_ioctl fs/ioctl.c:51 [inline]
 __do_sys_ioctl fs/ioctl.c:906 [inline]
 __se_sys_ioctl fs/ioctl.c:892 [inline]
 __x64_sys_ioctl+0x194/0x200 fs/ioctl.c:892
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xcb/0x250 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
 </TASK>

Allocated:

 aarp_alloc net/appletalk/aarp.c:382 [inline]
 aarp_proxy_probe_network+0xd8/0x630 net/appletalk/aarp.c:468
 atif_proxy_probe_device net/appletalk/ddp.c:332 [inline]
 atif_ioctl+0xb58/0x16c0 net/appletalk/ddp.c:857
 atalk_ioctl+0x198/0x2f0 net/appletalk/ddp.c:1818

Freed:

 kfree+0x148/0x4d0 mm/slub.c:4841
 __aarp_expire net/appletalk/aarp.c:90 [inline]
 __aarp_expire_timer net/appletalk/aarp.c:261 [inline]
 aarp_expire_timeout+0x480/0x6e0 net/appletalk/aarp.c:317

The buggy address belongs to the object at ffff8880123aa300
 which belongs to the cache kmalloc-192 of size 192

The buggy address is located 96 bytes inside of
freed 192-byte region [ffff8880123aa300, ffff8880123aa3c0)

Memory state around the buggy address:
 ffff8880123aa200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880123aa280: 00 00 00 00 fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8880123aa300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                       ^
 ffff8880123aa380: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
 ffff8880123aa400: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
---
 net/appletalk/aarp.c | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)
net/appletalk/aarp.c +21 -3
index be18af481d7d5..17d9cb380e7bd 100644
@@ -35,6 +35,7 @@
 #include <linux/seq_file.h>
 #include <linux/export.h>
 #include <linux/etherdevice.h>
+#include <linux/refcount.h>
 
 int sysctl_aarp_expiry_time = AARP_EXPIRY_TIME;
 int sysctl_aarp_tick_time = AARP_TICK_TIME;
@@ -44,6 +45,7 @@ int sysctl_aarp_resolve_time = AARP_RESOLVE_TIME;
 /* Lists of aarp entries */
 /**
  *	struct aarp_entry - AARP entry
+ *	@refcnt: Reference count
  *	@last_sent: Last time we xmitted the aarp request
  *	@packet_queue: Queue of frames wait for resolution
  *	@status: Used for proxy AARP
@@ -55,6 +57,7 @@ int sysctl_aarp_resolve_time = AARP_RESOLVE_TIME;
  *	@next: Next entry in chain
  */
 struct aarp_entry {
+	refcount_t			refcnt;
 	/* These first two are only used for unresolved entries */
 	unsigned long		last_sent;
 	struct sk_buff_head	packet_queue;
@@ -79,6 +82,17 @@ static DEFINE_RWLOCK(aarp_lock);
 /* Used to walk the list and purge/kick entries.  */
 static struct timer_list aarp_timer;
 
+static inline void aarp_entry_get(struct aarp_entry *a)
+{
+	refcount_inc(&a->refcnt);
+}
+
+static inline void aarp_entry_put(struct aarp_entry *a)
+{
+	if (refcount_dec_and_test(&a->refcnt))
+		kfree(a);
+}
+
 /*
  *	Delete an aarp queue
  *
@@ -87,7 +101,7 @@ static struct timer_list aarp_timer;
 static void __aarp_expire(struct aarp_entry *a)
 {
 	skb_queue_purge(&a->packet_queue);
-	kfree(a);
+	aarp_entry_put(a);
 }
 
 /*
@@ -380,9 +394,11 @@ static void aarp_purge(void)
 static struct aarp_entry *aarp_alloc(void)
 {
 	struct aarp_entry *a = kmalloc(sizeof(*a), GFP_ATOMIC);
+	if (!a)
+		return NULL;
 
-	if (a)
-		skb_queue_head_init(&a->packet_queue);
+	refcount_set(&a->refcnt, 1);
+	skb_queue_head_init(&a->packet_queue);
 	return a;
 }
 
@@ -508,6 +524,7 @@ int aarp_proxy_probe_network(struct atalk_iface *atif, struct atalk_addr *sa)
 	entry->dev = atif->dev;
 
 	write_lock_bh(&aarp_lock);
+	aarp_entry_get(entry);
 
 	hash = sa->s_node % (AARP_HASH_SIZE - 1);
 	entry->next = proxies[hash];
@@ -533,6 +550,7 @@ int aarp_proxy_probe_network(struct atalk_iface *atif, struct atalk_addr *sa)
 		retval = 1;
 	}
 
+	aarp_entry_put(entry);
 	write_unlock_bh(&aarp_lock);
 out:
 	return retval;
Signature · 1 line
2.39.5
author maintainer
#60 lore raw

PATCH 60/403 net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiang Mei <[email protected]>

[ Upstream commit cf074eca0065bc5142e6004ae236bb35a2687fdf ]

might_sleep could be trigger in the atomic context in qfq_delete_class.

qfq_destroy_class was moved into atomic context locked
by sch_tree_lock to avoid a race condition bug on qfq_aggregate. However, might_sleep could be triggered by qfq_destroy_class, which introduced sleeping in atomic context (path:
qfq_destroy_class->qdisc_put->__qdisc_destroy->lockdep_unregister_key ->might_sleep).

Considering the race is on the qfq_aggregate objects, keeping qfq_rm_from_agg in the lock but moving the left part out can solve this issue.

---
 net/sched/sch_qfq.c | 7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
net/sched/sch_qfq.c +3 -4
index 2a4331a084949..be04fcfcc5852 100644
@@ -534,9 +534,6 @@ static int qfq_change_class(struct Qdisc *sch, u32 classid, u32 parentid,
 
 static void qfq_destroy_class(struct Qdisc *sch, struct qfq_class *cl)
 {
-	struct qfq_sched *q = qdisc_priv(sch);
-
-	qfq_rm_from_agg(q, cl);
 	gen_kill_estimator(&cl->rate_est);
 	qdisc_put(cl->qdisc);
 	kfree(cl);
@@ -554,10 +551,11 @@ static int qfq_delete_class(struct Qdisc *sch, unsigned long arg)
 
 	qdisc_purge_queue(cl->qdisc);
 	qdisc_class_hash_remove(&q->clhash, &cl->common);
-	qfq_destroy_class(sch, cl);
+	qfq_rm_from_agg(q, cl);
 
 	sch_tree_unlock(sch);
 
+	qfq_destroy_class(sch, cl);
 	return 0;
 }
 
@@ -1507,6 +1505,7 @@ static void qfq_destroy_qdisc(struct Qdisc *sch)
 	for (i = 0; i < q->clhash.hashsize; i++) {
 		hlist_for_each_entry_safe(cl, next, &q->clhash.hash[i],
 					  common.hnode) {
+			qfq_rm_from_agg(q, cl);
 			qfq_destroy_class(sch, cl);
 		}
 	}
Signature · 1 line
2.39.5
author maintainer
#61 lore raw

PATCH 61/403 i2c: qup: jump out of the loop in case of timeout

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yang Xiwen <[email protected]>

commit a7982a14b3012527a9583d12525cd0dc9f8d8934 upstream.

Original logic only sets the return value but doesn't jump out of the loop if the bus is kept active by a client. This is not expected. A malicious or buggy i2c client can hang the kernel in this case and should be avoided. This is observed during a long time test with a PCA953x GPIO extender.

Fix it by changing the logic to not only sets the return value, but also jumps out of the loop and return to the caller with -ETIMEDOUT.

Fixes fbfab1ab0658 ("i2c: qup: reorganization of driver code to remove polling for qup v1")
Cc <[email protected]> # v4.17+
---
 drivers/i2c/busses/i2c-qup.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-qup.c +3 -1
@@ -449,8 +449,10 @@ static int qup_i2c_bus_active(struct qup
 		if (!(status & I2C_STATUS_BUS_ACTIVE))
 			break;
 
-		if (time_after(jiffies, timeout))
+		if (time_after(jiffies, timeout)) {
 			ret = -ETIMEDOUT;
+			break;
+		}
 
 		usleep_range(len, len * 2);
 	}
author maintainer
#62 lore raw

PATCH 62/403 nilfs2: reject invalid file types when reading inodes

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ryusuke Konishi <[email protected]>

commit 4aead50caf67e01020c8be1945c3201e8a972a27 upstream.

To prevent inodes with invalid file types from tripping through the vfs and causing malfunctions or assertion failures, add a missing sanity check when reading an inode from a block device. If the file type is not valid, treat it as a filesystem error.

---
 fs/nilfs2/inode.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
fs/nilfs2/inode.c +8 -1
@@ -525,11 +525,18 @@ static int __nilfs_read_inode(struct sup
 		inode->i_op = &nilfs_symlink_inode_operations;
 		inode_nohighmem(inode);
 		inode->i_mapping->a_ops = &nilfs_aops;
-	} else {
+	} else if (S_ISCHR(inode->i_mode) || S_ISBLK(inode->i_mode) ||
+		   S_ISFIFO(inode->i_mode) || S_ISSOCK(inode->i_mode)) {
 		inode->i_op = &nilfs_special_inode_operations;
 		init_special_inode(
 			inode, inode->i_mode,
 			huge_decode_dev(le64_to_cpu(raw_inode->i_device_code)));
+	} else {
+		nilfs_error(sb,
+			    "invalid file type bits in mode 0%o for inode %lu",
+			    inode->i_mode, ino);
+		err = -EIO;
+		goto failed_unmap;
 	}
 	nilfs_ifile_unmap_inode(root->ifile, ino, bh);
 	brelse(bh);
author maintainer
#63 lore raw

PATCH 63/403 comedi: comedi_test: Fix possible deletion of uninitialized timers

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ian Abbott <[email protected]>

commit 1b98304c09a0192598d0767f1eb8c83d7e793091 upstream.

In waveform_common_attach(), the two timers &devpriv->ai_timer and &devpriv->ao_timer are initialized after the allocation of the device private data by comedi_alloc_devpriv() and the subdevices by comedi_alloc_subdevices(). The function may return with an error between those function calls. In that case, waveform_detach() will be called by the Comedi core to clean up. The check that waveform_detach() uses to decide whether to delete the timers is incorrect. It only checks that the device private data was allocated, but that does not guarantee that the timers were initialized. It also needs to check that the subdevices were allocated. Fix it.

Fixes 73e0e4dfed4c ("staging: comedi: comedi_test: fix timer lock-up")
[ file location from drivers/comedi to drivers/staging/comedi and timer_delete_sync() to del_timer_sync(). ]
---
 drivers/staging/comedi/drivers/comedi_test.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/comedi/drivers/comedi_test.c +1 -1
@@ -790,7 +790,7 @@ static void waveform_detach(struct comed
 {
 	struct waveform_private *devpriv = dev->private;
 
-	if (devpriv) {
+	if (devpriv && dev->n_subdevices) {
 		del_timer_sync(&devpriv->ai_timer);
 		del_timer_sync(&devpriv->ao_timer);
 	}
author maintainer
#64 lore raw

PATCH 64/403 ALSA: hda: Add missing NVIDIA HDA codec IDs

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Dadap <[email protected]>

commit e0a911ac86857a73182edde9e50d9b4b949b7f01 upstream.

Add codec IDs for several NVIDIA products with HDA controllers to the snd_hda_id_hdmi[] patch table.

---
 sound/pci/hda/patch_hdmi.c |   19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
sound/pci/hda/patch_hdmi.c +19 -0
@@ -4161,6 +4161,8 @@ HDA_CODEC_ENTRY(0x10de002d, "Tegra186 HD
 HDA_CODEC_ENTRY(0x10de002e, "Tegra186 HDMI/DP1", patch_tegra_hdmi),
 HDA_CODEC_ENTRY(0x10de002f, "Tegra194 HDMI/DP2", patch_tegra_hdmi),
 HDA_CODEC_ENTRY(0x10de0030, "Tegra194 HDMI/DP3", patch_tegra_hdmi),
+HDA_CODEC_ENTRY(0x10de0033, "SoC 33 HDMI/DP",	patch_tegra_hdmi),
+HDA_CODEC_ENTRY(0x10de0035, "SoC 35 HDMI/DP",	patch_tegra_hdmi),
 HDA_CODEC_ENTRY(0x10de0040, "GPU 40 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de0041, "GPU 41 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de0042, "GPU 42 HDMI/DP",	patch_nvhdmi),
@@ -4199,15 +4201,32 @@ HDA_CODEC_ENTRY(0x10de0097, "GPU 97 HDMI
 HDA_CODEC_ENTRY(0x10de0098, "GPU 98 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de0099, "GPU 99 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de009a, "GPU 9a HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de009b, "GPU 9b HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de009c, "GPU 9c HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de009d, "GPU 9d HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de009e, "GPU 9e HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de009f, "GPU 9f HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de00a0, "GPU a0 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00a1, "GPU a1 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de00a3, "GPU a3 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de00a4, "GPU a4 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de00a5, "GPU a5 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de00a6, "GPU a6 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de00a7, "GPU a7 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00a8, "GPU a8 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00a9, "GPU a9 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00aa, "GPU aa HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00ab, "GPU ab HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00ad, "GPU ad HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00ae, "GPU ae HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00af, "GPU af HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00b0, "GPU b0 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00b1, "GPU b1 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00c0, "GPU c0 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00c1, "GPU c1 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00c3, "GPU c3 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00c4, "GPU c4 HDMI/DP",	patch_nvhdmi),
+HDA_CODEC_ENTRY(0x10de00c5, "GPU c5 HDMI/DP",	patch_nvhdmi),
 HDA_CODEC_ENTRY(0x10de8001, "MCP73 HDMI",	patch_nvhdmi_2ch),
 HDA_CODEC_ENTRY(0x10de8067, "MCP67/68 HDMI",	patch_nvhdmi_2ch),
 HDA_CODEC_ENTRY(0x11069f80, "VX900 HDMI/DP",	patch_via_hdmi),
author maintainer
#65 lore raw

PATCH 65/403 usb: chipidea: udc: add new API ci_hdrc_gadget_connect

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Chen <[email protected]>

[ Upstream commit d16ab536aad208421c5ed32cdcb01b5ab6aa1f19 ]

This API is used enable device function, it is called at below situations:
- VBUS is connected during boots up
- Hot plug occurs during runtime

Stable-dep-of: b7a62611fab7 ("usb: chipidea: add USB PHY event")

---
 drivers/usb/chipidea/udc.c | 63 +++++++++++++++++++-------------------
 1 file changed, 32 insertions(+), 31 deletions(-)
drivers/usb/chipidea/udc.c +32 -31
index a6ce6b89b271..e9ef6271e20d 100644
@@ -1533,6 +1533,33 @@ static const struct usb_ep_ops usb_ep_ops = {
 /******************************************************************************
  * GADGET block
  *****************************************************************************/
+/**
+ * ci_hdrc_gadget_connect: caller makes sure gadget driver is binded
+ */
+static void ci_hdrc_gadget_connect(struct usb_gadget *_gadget, int is_active)
+{
+	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+
+	if (is_active) {
+		pm_runtime_get_sync(&_gadget->dev);
+		hw_device_reset(ci);
+		hw_device_state(ci, ci->ep0out->qh.dma);
+		usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+		usb_udc_vbus_handler(_gadget, true);
+	} else {
+		usb_udc_vbus_handler(_gadget, false);
+		if (ci->driver)
+			ci->driver->disconnect(&ci->gadget);
+		hw_device_state(ci, 0);
+		if (ci->platdata->notify_event)
+			ci->platdata->notify_event(ci,
+			CI_HDRC_CONTROLLER_STOPPED_EVENT);
+		_gadget_stop_activity(&ci->gadget);
+		pm_runtime_put_sync(&_gadget->dev);
+		usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
+	}
+}
+
 static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
@@ -1549,26 +1576,8 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 		usb_phy_set_charger_state(ci->usb_phy, is_active ?
 			USB_CHARGER_PRESENT : USB_CHARGER_ABSENT);
 
-	if (gadget_ready) {
-		if (is_active) {
-			pm_runtime_get_sync(&_gadget->dev);
-			hw_device_reset(ci);
-			hw_device_state(ci, ci->ep0out->qh.dma);
-			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
-			usb_udc_vbus_handler(_gadget, true);
-		} else {
-			usb_udc_vbus_handler(_gadget, false);
-			if (ci->driver)
-				ci->driver->disconnect(&ci->gadget);
-			hw_device_state(ci, 0);
-			if (ci->platdata->notify_event)
-				ci->platdata->notify_event(ci,
-				CI_HDRC_CONTROLLER_STOPPED_EVENT);
-			_gadget_stop_activity(&ci->gadget);
-			pm_runtime_put_sync(&_gadget->dev);
-			usb_gadget_set_state(_gadget, USB_STATE_NOTATTACHED);
-		}
-	}
+	if (gadget_ready)
+		ci_hdrc_gadget_connect(_gadget, is_active);
 
 	return 0;
 }
@@ -1794,18 +1803,10 @@ static int ci_udc_start(struct usb_gadget *gadget,
 		return retval;
 	}
 
-	pm_runtime_get_sync(&ci->gadget.dev);
-	if (ci->vbus_active) {
-		hw_device_reset(ci);
-	} else {
+	if (ci->vbus_active)
+		ci_hdrc_gadget_connect(gadget, 1);
+	else
 		usb_udc_vbus_handler(&ci->gadget, false);
-		pm_runtime_put_sync(&ci->gadget.dev);
-		return retval;
-	}
-
-	retval = hw_device_state(ci, ci->ep0out->qh.dma);
-	if (retval)
-		pm_runtime_put_sync(&ci->gadget.dev);
 
 	return retval;
 }
Signature · 1 line
2.39.5
author maintainer
#66 lore raw

PATCH 66/403 usb: chipidea: udc: protect usb interrupt enable

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jun Li <[email protected]>

[ Upstream commit 72dc8df7920fc24eba0f586c56e900a1643ff2b3 ]

We hit the problem with below sequence:
- ci_udc_vbus_session() update vbus_active flag and ci->driver is valid,
- before calling the ci_hdrc_gadget_connect(), usb_gadget_udc_stop() is called by application remove gadget driver,
- ci_udc_vbus_session() will contine do ci_hdrc_gadget_connect() as gadget_ready is 1, so udc interrupt is enabled, but ci->driver is NULL.
- USB connection irq generated but ci->driver is NULL.

As udc irq only should be enabled when gadget driver is binded, so add spinlock to protect the usb irq enable for vbus session handling.

Stable-dep-of: b7a62611fab7 ("usb: chipidea: add USB PHY event")

---
 drivers/usb/chipidea/udc.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
drivers/usb/chipidea/udc.c +10 -8
index e9ef6271e20d..9212c3842a1b 100644
@@ -1539,13 +1539,18 @@ static const struct usb_ep_ops usb_ep_ops = {
 static void ci_hdrc_gadget_connect(struct usb_gadget *_gadget, int is_active)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
+	unsigned long flags;
 
 	if (is_active) {
 		pm_runtime_get_sync(&_gadget->dev);
 		hw_device_reset(ci);
-		hw_device_state(ci, ci->ep0out->qh.dma);
-		usb_gadget_set_state(_gadget, USB_STATE_POWERED);
-		usb_udc_vbus_handler(_gadget, true);
+		spin_lock_irqsave(&ci->lock, flags);
+		if (ci->driver) {
+			hw_device_state(ci, ci->ep0out->qh.dma);
+			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+			usb_udc_vbus_handler(_gadget, true);
+		}
+		spin_unlock_irqrestore(&ci->lock, flags);
 	} else {
 		usb_udc_vbus_handler(_gadget, false);
 		if (ci->driver)
@@ -1564,19 +1569,16 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 	unsigned long flags;
-	int gadget_ready = 0;
 
 	spin_lock_irqsave(&ci->lock, flags);
 	ci->vbus_active = is_active;
-	if (ci->driver)
-		gadget_ready = 1;
 	spin_unlock_irqrestore(&ci->lock, flags);
 
 	if (ci->usb_phy)
 		usb_phy_set_charger_state(ci->usb_phy, is_active ?
 			USB_CHARGER_PRESENT : USB_CHARGER_ABSENT);
 
-	if (gadget_ready)
+	if (ci->driver)
 		ci_hdrc_gadget_connect(_gadget, is_active);
 
 	return 0;
@@ -1836,6 +1838,7 @@ static int ci_udc_stop(struct usb_gadget *gadget)
 	unsigned long flags;
 
 	spin_lock_irqsave(&ci->lock, flags);
+	ci->driver = NULL;
 
 	if (ci->vbus_active) {
 		hw_device_state(ci, 0);
@@ -1848,7 +1851,6 @@ static int ci_udc_stop(struct usb_gadget *gadget)
 		pm_runtime_put(&ci->gadget.dev);
 	}
 
-	ci->driver = NULL;
 	spin_unlock_irqrestore(&ci->lock, flags);
 
 	ci_udc_stop_for_otg_fsm(ci);
Signature · 1 line
2.39.5
author maintainer
#67 lore raw

PATCH 67/403 usb: chipidea: introduce CI_HDRC_CONTROLLER_VBUS_EVENT glue layer use

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Chen <[email protected]>

[ Upstream commit d755cdb1b9d7e1b645e176b97eb137194bbe8cf9 ]

Some vendors glue layer need to handle some events for vbus, eg, some i.mx platforms (imx7d, imx8mm, imx8mn, etc) needs vbus event to handle charger detection, its charger detection is finished at glue layer code, but not at USB PHY driver.

Stable-dep-of: b7a62611fab7 ("usb: chipidea: add USB PHY event")

---
 drivers/usb/chipidea/udc.c   | 7 ++++++-
 include/linux/usb/chipidea.h | 1 +
 2 files changed, 7 insertions(+), 1 deletion(-)
drivers/usb/chipidea/udc.c +6 -1
index 9212c3842a1b..dfae454ca9ba 100644
@@ -1569,6 +1569,7 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
 	unsigned long flags;
+	int ret = 0;
 
 	spin_lock_irqsave(&ci->lock, flags);
 	ci->vbus_active = is_active;
@@ -1578,10 +1579,14 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 		usb_phy_set_charger_state(ci->usb_phy, is_active ?
 			USB_CHARGER_PRESENT : USB_CHARGER_ABSENT);
 
+	if (ci->platdata->notify_event)
+		ret = ci->platdata->notify_event(ci,
+				CI_HDRC_CONTROLLER_VBUS_EVENT);
+
 	if (ci->driver)
 		ci_hdrc_gadget_connect(_gadget, is_active);
 
-	return 0;
+	return ret;
 }
 
 static int ci_udc_wakeup(struct usb_gadget *_gadget)
include/linux/usb/chipidea.h +1 -0
index edd89b7c8f18..54167a2d28ea 100644
@@ -67,6 +67,7 @@ struct ci_hdrc_platform_data {
 #define CI_HDRC_CONTROLLER_STOPPED_EVENT	1
 #define CI_HDRC_IMX_HSIC_ACTIVE_EVENT		2
 #define CI_HDRC_IMX_HSIC_SUSPEND_EVENT		3
+#define CI_HDRC_CONTROLLER_VBUS_EVENT		4
 	int	(*notify_event) (struct ci_hdrc *ci, unsigned event);
 	struct regulator	*reg_vbus;
 	struct usb_otg_caps	ci_otg_caps;
Signature · 1 line
2.39.5
author maintainer
#68 lore raw

PATCH 68/403 usb: chipidea: add USB PHY event

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xu Yang <[email protected]>

[ Upstream commit b7a62611fab72e585c729a7fcf666aa9c4144214 ]

Add USB PHY event for below situation:
- usb role changed
- vbus connect
- vbus disconnect
- gadget driver is enumerated

USB PHY driver can get the last event after above situation occurs and deal with different situations.

---
 drivers/usb/chipidea/ci.h  | 18 ++++++++++++++++--
 drivers/usb/chipidea/udc.c | 10 ++++++++++
 2 files changed, 26 insertions(+), 2 deletions(-)
drivers/usb/chipidea/ci.h +16 -2
index ff61f88fc867..3a22bc727bb9 100644
@@ -277,8 +277,19 @@ static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
 		return -ENXIO;
 
 	ret = ci->roles[role]->start(ci);
-	if (!ret)
-		ci->role = role;
+	if (ret)
+		return ret;
+
+	ci->role = role;
+
+	if (ci->usb_phy) {
+		if (role == CI_ROLE_HOST)
+			usb_phy_set_event(ci->usb_phy, USB_EVENT_ID);
+		else
+			/* in device mode but vbus is invalid*/
+			usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
+	}
+
 	return ret;
 }
 
@@ -292,6 +303,9 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
 	ci->role = CI_ROLE_END;
 
 	ci->roles[role]->stop(ci);
+
+	if (ci->usb_phy)
+		usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
 }
 
 static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci)
drivers/usb/chipidea/udc.c +10 -0
index dfae454ca9ba..19a9a4b83346 100644
@@ -1583,6 +1583,13 @@ static int ci_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
 		ret = ci->platdata->notify_event(ci,
 				CI_HDRC_CONTROLLER_VBUS_EVENT);
 
+	if (ci->usb_phy) {
+		if (is_active)
+			usb_phy_set_event(ci->usb_phy, USB_EVENT_VBUS);
+		else
+			usb_phy_set_event(ci->usb_phy, USB_EVENT_NONE);
+	}
+
 	if (ci->driver)
 		ci_hdrc_gadget_connect(_gadget, is_active);
 
@@ -1898,6 +1905,9 @@ static irqreturn_t udc_irq(struct ci_hdrc *ci)
 		if (USBi_PCI & intr) {
 			ci->gadget.speed = hw_port_is_high_speed(ci) ?
 				USB_SPEED_HIGH : USB_SPEED_FULL;
+			if (ci->usb_phy)
+				usb_phy_set_event(ci->usb_phy,
+					USB_EVENT_ENUMERATED);
 			if (ci->suspended) {
 				if (ci->driver->resume) {
 					spin_unlock(&ci->lock);
Signature · 1 line
2.39.5
author maintainer
#69 lore raw

PATCH 69/403 usb: phy: mxs: disconnect line when USB charger is attached

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xu Yang <[email protected]>

[ Upstream commit 87ed257acb0934e08644568df6495988631afd4c ]

For mxs PHY, if there is a vbus but the bus is not enumerated, we need to force the dp/dm as SE0 from the controller side. If not, there is possible USB wakeup due to unstable dp/dm, since there is possible no pull on dp/dm, such as there is a USB charger on the port.

---
 drivers/usb/phy/phy-mxs-usb.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/usb/phy/phy-mxs-usb.c +3 -1
index 6dfecbd47d7a..7c81ccaaf2e9 100644
@@ -394,6 +394,7 @@ static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
 static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 {
 	bool vbus_is_on = false;
+	enum usb_phy_events last_event = mxs_phy->phy.last_event;
 
 	/* If the SoCs don't need to disconnect line without vbus, quit */
 	if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
@@ -405,7 +406,8 @@ static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
 
 	vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
 
-	if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
+	if (on && ((!vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
+		|| (last_event == USB_EVENT_VBUS)))
 		__mxs_phy_disconnect_line(mxs_phy, true);
 	else
 		__mxs_phy_disconnect_line(mxs_phy, false);
Signature · 1 line
2.39.5
author maintainer
#70 lore raw

PATCH 70/403 ethernet: intel: fix building with large NR_CPUS

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit 24171a5a4a952c26568ff0d2a0bc8c4708a95e1d ]

With large values of CONFIG_NR_CPUS, three Intel ethernet drivers fail to compile like:

In function ‘i40e_free_q_vector’,

    inlined from ‘i40e_vsi_alloc_q_vectors’ at drivers/net/ethernet/intel/i40e/i40e_main.c:12112:3:

571 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
include/linux/rcupdate.h:1084:17: note: in expansion of macro ‘BUILD_BUG_ON’
1084 | BUILD_BUG_ON(offsetof(typeof(*(ptr)), rhf) >= 4096); \
drivers/net/ethernet/intel/i40e/i40e_main.c:5113:9: note: in expansion of macro ‘kfree_rcu’

 5113 |         kfree_rcu(q_vector, rcu);
      |         ^~~~~~~~~

The problem is that the 'rcu' member in 'q_vector' is too far from the start of the structure. Move this member before the CPU mask instead, in all three drivers.

---
 drivers/net/ethernet/intel/fm10k/fm10k.h | 3 ++-
 drivers/net/ethernet/intel/i40e/i40e.h   | 2 +-
 drivers/net/ethernet/intel/ixgbe/ixgbe.h | 3 ++-
 3 files changed, 5 insertions(+), 3 deletions(-)
drivers/net/ethernet/intel/fm10k/fm10k.h +2 -1
index b14441944b4b..db72e5e4acd3 100644
@@ -189,13 +189,14 @@ struct fm10k_q_vector {
 	struct fm10k_ring_container rx, tx;
 
 	struct napi_struct napi;
+	struct rcu_head rcu;	/* to avoid race with update stats on free */
+
 	cpumask_t affinity_mask;
 	char name[IFNAMSIZ + 9];
 
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dbg_q_vector;
 #endif /* CONFIG_DEBUG_FS */
-	struct rcu_head rcu;	/* to avoid race with update stats on free */
 
 	/* for dynamic allocation of rings associated with this q_vector */
 	struct fm10k_ring ring[0] ____cacheline_internodealigned_in_smp;
drivers/net/ethernet/intel/i40e/i40e.h +1 -1
index 4c8c31692e9e..edb5e408c980 100644
@@ -864,6 +864,7 @@ struct i40e_q_vector {
 	u16 reg_idx;		/* register index of the interrupt */
 
 	struct napi_struct napi;
+	struct rcu_head rcu;	/* to avoid race with update stats on free */
 
 	struct i40e_ring_container rx;
 	struct i40e_ring_container tx;
@@ -874,7 +875,6 @@ struct i40e_q_vector {
 	cpumask_t affinity_mask;
 	struct irq_affinity_notify affinity_notify;
 
-	struct rcu_head rcu;	/* to avoid race with update stats on free */
 	char name[I40E_INT_NAME_STR_LEN];
 	bool arm_wb_state;
 } ____cacheline_internodealigned_in_smp;
drivers/net/ethernet/intel/ixgbe/ixgbe.h +2 -1
index 0142ca226bf5..0f9a1fce0dee 100644
@@ -458,9 +458,10 @@ struct ixgbe_q_vector {
 	struct ixgbe_ring_container rx, tx;
 
 	struct napi_struct napi;
+	struct rcu_head rcu;	/* to avoid race with update stats on free */
+
 	cpumask_t affinity_mask;
 	int numa_node;
-	struct rcu_head rcu;	/* to avoid race with update stats on free */
 	char name[IFNAMSIZ + 9];
 
 	/* for dynamic allocation of rings associated with this q_vector */
Signature · 1 line
2.39.5
author maintainer
#71 lore raw

PATCH 71/403 ASoC: Intel: fix SND_SOC_SOF dependencies

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit e837b59f8b411b5baf5e3de7a5aea10b1c545a63 ]

It is currently possible to configure a kernel with all Intel SoC configs as loadable modules, but the board config as built-in. This causes a link failure in the reference to the snd_soc_sof.ko module:

x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_hw_params':
sof_rt5682.c:(.text+0x1f9): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sof_rt5682.c:(.text+0x234): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_rt5682.o: in function `sof_rt5682_codec_init':
sof_rt5682.c:(.text+0x3e0): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cs42l42.o: in function `sof_cs42l42_hw_params':
sof_cs42l42.c:(.text+0x2a): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_nau8825.o: in function `sof_nau8825_hw_params':
sof_nau8825.c:(.text+0x7f): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_da7219.o: in function `da7219_codec_init':
sof_da7219.c:(.text+0xbf): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_maxim_common.o: in function `max_98373_hw_params':
sof_maxim_common.c:(.text+0x6f9): undefined reference to `sof_dai_get_tdm_slots'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1015_hw_params':
sof_realtek_common.c:(.text+0x54c): undefined reference to `sof_dai_get_bclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_realtek_common.o: in function `rt1308_hw_params':
sof_realtek_common.c:(.text+0x702): undefined reference to `sof_dai_get_mclk'
x86_64-linux-ld: sound/soc/intel/boards/sof_cirrus_common.o: in function `cs35l41_hw_params':
sof_cirrus_common.c:(.text+0x2f): undefined reference to `sof_dai_get_bclk'

Add an optional dependency on SND_SOC_SOF_INTEL_COMMON, to ensure that whenever the SOF support is in a loadable module, none of the board code can be built-in.

This may be be a little heavy-handed, but I also don't see a reason why one would want the boards to be built-in but not the SoC, so it shouldn't actually cause any usability problems.

---
 sound/soc/intel/boards/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/intel/boards/Kconfig +1 -1
index 5c27f7ab4a5f..78a75c29ed88 100644
@@ -11,7 +11,7 @@ menuconfig SND_SOC_INTEL_MACH
          kernel: saying N will just cause the configurator to skip all
          the questions about Intel ASoC machine drivers.
 
-if SND_SOC_INTEL_MACH
+if SND_SOC_INTEL_MACH && (SND_SOC_SOF_INTEL_COMMON || !SND_SOC_SOF_INTEL_COMMON)
 
 if SND_SOC_INTEL_HASWELL
 
Signature · 1 line
2.39.5
author maintainer
#72 lore raw

PATCH 72/403 hfsplus: remove mutex_lock check in hfsplus_free_extents

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yangtao Li <[email protected]>

[ Upstream commit fcb96956c921f1aae7e7b477f2435c56f77a31b4 ]

Syzbot reported an issue in hfsplus filesystem:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 4400 at fs/hfsplus/extents.c:346
	hfsplus_free_extents+0x700/0xad0
Call Trace:
<TASK>
hfsplus_file_truncate+0x768/0xbb0 fs/hfsplus/extents.c:606
hfsplus_write_begin+0xc2/0xd0 fs/hfsplus/inode.c:56
cont_expand_zero fs/buffer.c:2383 [inline]
cont_write_begin+0x2cf/0x860 fs/buffer.c:2446
hfsplus_write_begin+0x86/0xd0 fs/hfsplus/inode.c:52
generic_cont_expand_simple+0x151/0x250 fs/buffer.c:2347
hfsplus_setattr+0x168/0x280 fs/hfsplus/inode.c:263
notify_change+0xe38/0x10f0 fs/attr.c:420
do_truncate+0x1fb/0x2e0 fs/open.c:65
do_sys_ftruncate+0x2eb/0x380 fs/open.c:193
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

To avoid deadlock, Commit 31651c607151 ("hfsplus: avoid deadlock on file truncation") unlock extree before hfsplus_free_extents(), and add check wheather extree is locked in hfsplus_free_extents().

However, when operations such as hfsplus_file_release, hfsplus_setattr, hfsplus_unlink, and hfsplus_get_block are executed concurrently in different files, it is very likely to trigger the WARN_ON, which will lead syzbot and xfstest to consider it as an abnormality.

The comment above this warning also describes one of the easy triggering situations, which can easily trigger and cause xfstest&syzbot to report errors.

[task A] [task B]
->hfsplus_file_release
->hfsplus_file_truncate

    ->hfs_find_init
      ->mutex_lock
    ->mutex_unlock
				->hfsplus_write_begin
				  ->hfsplus_get_block
				    ->hfsplus_file_extend
				      ->hfsplus_ext_read_extent
				        ->hfs_find_init
					  ->mutex_lock
    ->hfsplus_free_extents
      WARN_ON(mutex_is_locked) !!!

Several threads could try to lock the shared extents tree. And warning can be triggered in one thread when another thread has locked the tree. This is the wrong behavior of the code and we need to remove the warning.

---
 fs/hfsplus/extents.c | 3 ---
 1 file changed, 3 deletions(-)
fs/hfsplus/extents.c +0 -3
index c95a2f0ed4a7..fad1c250f150 100644
@@ -342,9 +342,6 @@ static int hfsplus_free_extents(struct super_block *sb,
 	int i;
 	int err = 0;
 
-	/* Mapping the allocation file may lock the extent tree */
-	WARN_ON(mutex_is_locked(&HFSPLUS_SB(sb)->ext_tree->tree_lock));
-
 	hfsplus_dump_extent(extent);
 	for (i = 0; i < 8; extent++, i++) {
 		count = be32_to_cpu(extent->block_count);
Signature · 1 line
2.39.5
author maintainer
#73 lore raw

PATCH 73/403 ASoC: ops: dynamically allocate struct snd_ctl_elem_value

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit 7e10d7242ea8a5947878880b912ffa5806520705 ]

This structure is really too larget to be allocated on the stack:

sound/soc/soc-ops.c:435:5: error: stack frame size (1296) exceeds limit (1280) in 'snd_soc_limit_volume' [-Werror,-Wframe-larger-than]

Change the function to dynamically allocate it instead.

There is probably a better way to do it since only two integer fields inside of that structure are actually used, but this is the simplest rework for the moment.

Fixes 783db6851c18 ("ASoC: ops: Enforce platform maximum on initial value")
---
 sound/soc/soc-ops.c | 26 +++++++++++++++-----------
 1 file changed, 15 insertions(+), 11 deletions(-)
sound/soc/soc-ops.c +15 -11
index a3b1f1c064dd..02e4f336b524 100644
@@ -638,28 +638,32 @@ EXPORT_SYMBOL_GPL(snd_soc_get_volsw_range);
 static int snd_soc_clip_to_platform_max(struct snd_kcontrol *kctl)
 {
 	struct soc_mixer_control *mc = (struct soc_mixer_control *)kctl->private_value;
-	struct snd_ctl_elem_value uctl;
+	struct snd_ctl_elem_value *uctl;
 	int ret;
 
 	if (!mc->platform_max)
 		return 0;
 
-	ret = kctl->get(kctl, &uctl);
+	uctl = kzalloc(sizeof(*uctl), GFP_KERNEL);
+	if (!uctl)
+		return -ENOMEM;
+
+	ret = kctl->get(kctl, uctl);
 	if (ret < 0)
-		return ret;
+		goto out;
 
-	if (uctl.value.integer.value[0] > mc->platform_max)
-		uctl.value.integer.value[0] = mc->platform_max;
+	if (uctl->value.integer.value[0] > mc->platform_max)
+		uctl->value.integer.value[0] = mc->platform_max;
 
 	if (snd_soc_volsw_is_stereo(mc) &&
-	    uctl.value.integer.value[1] > mc->platform_max)
-		uctl.value.integer.value[1] = mc->platform_max;
+	    uctl->value.integer.value[1] > mc->platform_max)
+		uctl->value.integer.value[1] = mc->platform_max;
 
-	ret = kctl->put(kctl, &uctl);
-	if (ret < 0)
-		return ret;
+	ret = kctl->put(kctl, uctl);
 
-	return 0;
+out:
+	kfree(uctl);
+	return ret;
 }
 
 /**
Signature · 1 line
2.39.5
author maintainer
#74 lore raw

PATCH 74/403 ARM: dts: vfxxx: Correctly use two tuples for timer address

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <[email protected]>

[ Upstream commit f3440dcf8b994197c968fbafe047ce27eed226e8 ]

Address and size-cells are 1 and the ftm timer node takes two address spaces in "reg" property, so this should be in two <> tuples. Change has no functional impact, but original code is confusing/less readable.

Fixes 07513e1330a9 ("ARM: dts: vf610: Add Freescale FlexTimer Module timer node.")
---
 arch/arm/boot/dts/vfxxx.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/vfxxx.dtsi +1 -1
index fa248066d9d9..3679922bbabc 100644
@@ -617,7 +617,7 @@ usbmisc1: usb@400b4800 {
 
 			ftm: ftm@400b8000 {
 				compatible = "fsl,ftm-timer";
-				reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+				reg = <0x400b8000 0x1000>, <0x400b9000 0x1000>;
 				interrupts = <44 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "ftm-evt", "ftm-src",
 					"ftm-evt-counter-en", "ftm-src-counter-en";
Signature · 1 line
2.39.5
author maintainer
#75 lore raw

PATCH 75/403 staging: fbtft: fix potential memory leak in fbtft_framebuffer_alloc()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Abdun Nihaal <[email protected]>

[ Upstream commit eb2cb7dab60f9be0b435ac4a674255429a36d72c ]

In the error paths after fb_info structure is successfully allocated, the memory allocated in fb_deferred_io_init() for info->pagerefs is not freed. Fix that by adding the cleanup function on the error path.

---
 drivers/staging/fbtft/fbtft-core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/staging/fbtft/fbtft-core.c +1 -0
index 771697508cec..a524cacd89cd 100644
@@ -752,6 +752,7 @@ struct fb_info *fbtft_framebuffer_alloc(struct fbtft_display *display,
 	return info;
 
 release_framebuf:
+	fb_deferred_io_cleanup(info);
 	framebuffer_release(info);
 
 alloc_fail:
Signature · 1 line
2.39.5
author maintainer
#76 lore raw

PATCH 76/403 vmci: Prevent the dispatching of uninitialized payloads

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lizhi Xu <[email protected]>

[ Upstream commit bfb4cf9fb97e4063f0aa62e9e398025fb6625031 ]

The reproducer executes the host's unlocked_ioctl call in two different tasks. When init_context fails, the struct vmci_event_ctx is not fully initialized when executing vmci_datagram_dispatch() to send events to all vm contexts. This affects the datagram taken from the datagram queue of its context by another task, because the datagram payload is not initialized according to the size payload_size, which causes the kernel data to leak to the user space.

Before dispatching the datagram, and before setting the payload content, explicitly set the payload content to 0 to avoid data leakage caused by incomplete payload initialization.

---
 drivers/misc/vmw_vmci/vmci_context.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/misc/vmw_vmci/vmci_context.c +2 -0
index 26ff49fdf0f7..ccadbc0d8f7d 100644
@@ -251,6 +251,8 @@ static int ctx_fire_notification(u32 context_id, u32 priv_flags)
 		ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID,
 						  VMCI_CONTEXT_RESOURCE_ID);
 		ev.msg.hdr.payload_size = sizeof(ev) - sizeof(ev.msg.hdr);
+		memset((char*)&ev.msg.hdr + sizeof(ev.msg.hdr), 0,
+			ev.msg.hdr.payload_size);
 		ev.msg.event_data.event = VMCI_EVENT_CTX_REMOVED;
 		ev.payload.context_id = context_id;
 
Signature · 1 line
2.39.5
author maintainer
#77 lore raw

PATCH 77/403 pps: fix poll support

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Denis OSTERLAND-HEIM <[email protected]>

[ Upstream commit 12c409aa1ec2592280a2ddcc66ff8f3c7f7bb171 ]

Because pps_cdev_poll() returns unconditionally EPOLLIN,
a user space program that calls select/poll get always an immediate data ready-to-read response. As a result the intended use to wait until next data becomes ready does not work.

User space snippet:

    struct pollfd pollfd = {
      .fd = open("/dev/pps0", O_RDONLY),
      .events = POLLIN|POLLERR,
      .revents = 0 };
    while(1) {
      poll(&pollfd, 1, 2000/*ms*/); // returns immediate, but should wait
      if(revents & EPOLLIN) { // always true
        struct pps_fdata fdata;
        memset(&fdata, 0, sizeof(memdata));
        ioctl(PPS_FETCH, &fdata); // currently fetches data at max speed
      }
    }

Lets remember the last fetch event counter and compare this value in pps_cdev_poll() with most recent event counter
and return 0 if they are equal.

---
 drivers/pps/pps.c          | 11 +++++++++--
 include/linux/pps_kernel.h |  1 +
 2 files changed, 10 insertions(+), 2 deletions(-)
drivers/pps/pps.c +9 -2
index 2d008e0d116a..ea966fc67d28 100644
@@ -41,6 +41,9 @@ static __poll_t pps_cdev_poll(struct file *file, poll_table *wait)
 
 	poll_wait(file, &pps->queue, wait);
 
+	if (pps->last_fetched_ev == pps->last_ev)
+		return 0;
+
 	return EPOLLIN | EPOLLRDNORM;
 }
 
@@ -186,9 +189,11 @@ static long pps_cdev_ioctl(struct file *file,
 		if (err)
 			return err;
 
-		/* Return the fetched timestamp */
+		/* Return the fetched timestamp and save last fetched event  */
 		spin_lock_irq(&pps->lock);
 
+		pps->last_fetched_ev = pps->last_ev;
+
 		fdata.info.assert_sequence = pps->assert_sequence;
 		fdata.info.clear_sequence = pps->clear_sequence;
 		fdata.info.assert_tu = pps->assert_tu;
@@ -272,9 +277,11 @@ static long pps_cdev_compat_ioctl(struct file *file,
 		if (err)
 			return err;
 
-		/* Return the fetched timestamp */
+		/* Return the fetched timestamp and save last fetched event  */
 		spin_lock_irq(&pps->lock);
 
+		pps->last_fetched_ev = pps->last_ev;
+
 		compat.info.assert_sequence = pps->assert_sequence;
 		compat.info.clear_sequence = pps->clear_sequence;
 		compat.info.current_mode = pps->current_mode;
include/linux/pps_kernel.h +1 -0
index c7abce28ed29..aab0aebb529e 100644
@@ -52,6 +52,7 @@ struct pps_device {
 	int current_mode;			/* PPS mode at event time */
 
 	unsigned int last_ev;			/* last PPS event id */
+	unsigned int last_fetched_ev;		/* last fetched PPS event id */
 	wait_queue_head_t queue;		/* PPS event queue */
 
 	unsigned int id;			/* PPS source unique ID */
Signature · 1 line
2.39.5
author maintainer
#78 lore raw

PATCH 78/403 Revert "vmci: Prevent the dispatching of uninitialized payloads"

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman <[email protected]>

[ Upstream commit 8f5d9bed6122b8d96508436e5ad2498bb797eb6b ]

This reverts commit bfb4cf9fb97e4063f0aa62e9e398025fb6625031.

While the code "looks" correct, the compiler has no way to know that doing "fun" pointer math like this really isn't a write off the end of the structure as there is no hint anywhere that the structure has data at the end of it.

This causes the following build warning:

In function 'fortify_memset_chk',
inlined from 'ctx_fire_notification.isra' at drivers/misc/vmw_vmci/vmci_context.c:254:3:
include/linux/fortify-string.h:480:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]

  480 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

So revert it for now and it can come back in the future in a "sane" way that either correctly makes the structure know that there is trailing data, OR just the payload structure is properly referenced and zeroed out.

Fixes bfb4cf9fb97e ("vmci: Prevent the dispatching of uninitialized payloads")
Cc Stephen Rothwell <[email protected]>
Cc Lizhi Xu <[email protected]>
---
 drivers/misc/vmw_vmci/vmci_context.c | 2 --
 1 file changed, 2 deletions(-)
drivers/misc/vmw_vmci/vmci_context.c +0 -2
index ccadbc0d8f7d..26ff49fdf0f7 100644
@@ -251,8 +251,6 @@ static int ctx_fire_notification(u32 context_id, u32 priv_flags)
 		ev.msg.hdr.src = vmci_make_handle(VMCI_HYPERVISOR_CONTEXT_ID,
 						  VMCI_CONTEXT_RESOURCE_ID);
 		ev.msg.hdr.payload_size = sizeof(ev) - sizeof(ev.msg.hdr);
-		memset((char*)&ev.msg.hdr + sizeof(ev.msg.hdr), 0,
-			ev.msg.hdr.payload_size);
 		ev.msg.event_data.event = VMCI_EVENT_CTX_REMOVED;
 		ev.payload.context_id = context_id;
 
Signature · 1 line
2.39.5
author maintainer
#79 lore raw

PATCH 79/403 usb: early: xhci-dbc: Fix early_ioremap leak

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lucas De Marchi <[email protected]>

[ Upstream commit 2b7eec2ec3015f52fc74cf45d0408925e984ecd1 ]

Using the kernel param earlyprintk=xdbc,keep without proper hardware setup leads to this:

	[ ] xhci_dbc:early_xdbc_parse_parameter: dbgp_num: 0
	...
	[ ] xhci_dbc:early_xdbc_setup_hardware: failed to setup the connection to host
	...
	[ ] calling  kmemleak_late_init+0x0/0xa0 @ 1
	[ ] kmemleak: Kernel memory leak detector initialized (mem pool available: 14919)
	[ ] kmemleak: Automatic memory scanning thread started
	[ ] initcall kmemleak_late_init+0x0/0xa0 returned 0 after 417 usecs
	[ ] calling  check_early_ioremap_leak+0x0/0x70 @ 1
	[ ] ------------[ cut here ]------------
	[ ] Debug warning: early ioremap leak of 1 areas detected.
	    please boot with early_ioremap_debug and report the dmesg.
	[ ] WARNING: CPU: 11 PID: 1 at mm/early_ioremap.c:90 check_early_ioremap_leak+0x4e/0x70

When early_xdbc_setup_hardware() fails, make sure to call early_iounmap() since xdbc_init() won't handle it.

Fixes aeb9dd1de98c ("usb/early: Add driver for xhci debug capability")
---
 drivers/usb/early/xhci-dbc.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/usb/early/xhci-dbc.c +4 -0
index 5a462a1d1896..7673ded077a4 100644
@@ -678,6 +678,10 @@ int __init early_xdbc_setup_hardware(void)
 
 		xdbc.table_base = NULL;
 		xdbc.out_buf = NULL;
+
+		early_iounmap(xdbc.xhci_base, xdbc.xhci_length);
+		xdbc.xhci_base = NULL;
+		xdbc.xhci_length = 0;
 	}
 
 	return ret;
Signature · 1 line
2.39.5
author maintainer
#80 lore raw

PATCH 80/403 ARM: dts: imx6ul-kontron-bl-common: Fix RTS polarity for RS485 interface

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Annette Kobou <[email protected]>

[ Upstream commit 47ef5256124fb939d8157b13ca048c902435cf23 ]

The polarity of the DE signal of the transceiver is active-high for sending. Therefore rs485-rts-active-low is wrong and needs to be removed to make RS485 transmissions work.

Fixes 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
---
 arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 1 -
 1 file changed, 1 deletion(-)
arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts +0 -1
index 4e99e6c79a68..9b347029c2f6 100644
@@ -168,7 +168,6 @@ &uart2 {
 	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
 	rs485-rx-during-tx;
-	rs485-rts-active-low;
 	uart-has-rtscts;
 	status = "okay";
 };
Signature · 1 line
2.39.5
author maintainer
#81 lore raw

PATCH 81/403 cpufreq: Init policy->rwsem before it may be possibly used

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lifeng Zheng <[email protected]>

[ Upstream commit d1378d1d7edb3a4c4935a44fe834ae135be03564 ]

In cpufreq_policy_put_kobj(), policy->rwsem is used. But in cpufreq_policy_alloc(), if freq_qos_add_notifier() returns an error, error path via err_kobj_remove or err_min_qos_notifier will be reached and cpufreq_policy_put_kobj() will be called before policy->rwsem is initialized. Thus, the calling of init_rwsem() should be moved to where before these two error paths can be reached.

Fixes 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework")
---
 drivers/cpufreq/cpufreq.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/cpufreq/cpufreq.c +2 -1
index 2a2fea6743aa..00f12d23077c 100644
@@ -1220,6 +1220,8 @@ static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
 		goto err_free_real_cpus;
 	}
 
+	init_rwsem(&policy->rwsem);
+
 	freq_constraints_init(&policy->constraints);
 
 	policy->nb_min.notifier_call = cpufreq_notifier_min;
@@ -1242,7 +1244,6 @@ static struct cpufreq_policy *cpufreq_policy_alloc(unsigned int cpu)
 	}
 
 	INIT_LIST_HEAD(&policy->policy_list);
-	init_rwsem(&policy->rwsem);
 	spin_lock_init(&policy->transition_lock);
 	init_waitqueue_head(&policy->transition_wait);
 	INIT_WORK(&policy->update, handle_update);
Signature · 1 line
2.39.5
author maintainer
#82 lore raw

PATCH 82/403 samples: mei: Fix building on musl libc

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brahmajit Das <[email protected]>

[ Upstream commit 239df3e4b4752524e7c0fb3417c218d8063654b4 ]

The header bits/wordsize.h is glibc specific and on building on musl with allyesconfig results in

samples/mei/mei-amt-version.c:77:10: fatal error: bits/wordsize.h: No such file or directory
77 | #include <bits/wordsize.h>

      |          ^~~~~~~~~~~~~~~~~

mei-amt-version.c build file without bits/wordsize.h on musl and glibc.

However on musl we get the follwing error without sys/time.h

samples/mei/mei-amt-version.c: In function 'mei_recv_msg':
samples/mei/mei-amt-version.c:159:24: error: storage size of 'tv' isn't known
159 | struct timeval tv;
| ^~
samples/mei/mei-amt-version.c:160:9: error: unknown type name 'fd_set'

  160 |         fd_set set;
      |         ^~~~~~
samples/mei/mei-amt-version.c:168:9: error: implicit declaration of function 'FD_ZERO' [-Wimplicit-function-declaration]
  168 |         FD_ZERO(&set);
      |         ^~~~~~~
samples/mei/mei-amt-version.c:169:9: error: implicit declaration of function 'FD_SET'; did you mean 'L_SET'? [-Wimplicit-function-declaration]
  169 |         FD_SET(me->fd, &set);
      |         ^~~~~~
      |         L_SET
samples/mei/mei-amt-version.c:170:14: error: implicit declaration of function 'select' [-Wimplicit-function-declaration]
  170 |         rc = select(me->fd + 1, &set, NULL, NULL, &tv);
      |              ^~~~~~
samples/mei/mei-amt-version.c:171:23: error: implicit declaration of function 'FD_ISSET' [-Wimplicit-function-declaration]
  171 |         if (rc > 0 && FD_ISSET(me->fd, &set)) {
      |                       ^~~~~~~~

samples/mei/mei-amt-version.c:159:24: warning: unused variable 'tv' [-Wunused-variable]
159 | struct timeval tv;
| ^~

Hence the the file has been included.

Fixes c52827cc4ddf ("staging/mei: add mei user space example")
---
 samples/mei/mei-amt-version.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
samples/mei/mei-amt-version.c +1 -1
index 32234481ad7d..9e8028e45e3b 100644
@@ -69,11 +69,11 @@
 #include <string.h>
 #include <fcntl.h>
 #include <sys/ioctl.h>
+#include <sys/time.h>
 #include <unistd.h>
 #include <errno.h>
 #include <stdint.h>
 #include <stdbool.h>
-#include <bits/wordsize.h>
 #include <linux/mei.h>
 
 /*****************************************************************************
Signature · 1 line
2.39.5
author maintainer
#83 lore raw

PATCH 83/403 staging: nvec: Fix incorrect null termination of battery manufacturer

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alok Tiwari <[email protected]>

[ Upstream commit a8934352ba01081c51d2df428e9d540aae0e88b5 ]

The battery manufacturer string was incorrectly null terminated using bat_model instead of bat_manu. This could result in an unintended write to the wrong field and potentially incorrect behavior.

fixe the issue by correctly null terminating the bat_manu string.

---
 drivers/staging/nvec/nvec_power.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/staging/nvec/nvec_power.c +1 -1
index 0e861c4bfcbf..590b801c5992 100644
@@ -194,7 +194,7 @@ static int nvec_power_bat_notifier(struct notifier_block *nb,
 		break;
 	case MANUFACTURER:
 		memcpy(power->bat_manu, &res->plc, res->length - 2);
-		power->bat_model[res->length - 2] = '\0';
+		power->bat_manu[res->length - 2] = '\0';
 		break;
 	case MODEL:
 		memcpy(power->bat_model, &res->plc, res->length - 2);
Signature · 1 line
2.39.5
author maintainer
#84 lore raw

PATCH 84/403 bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiayuan Chen <[email protected]>

[ Upstream commit 178f6a5c8cb3b6be1602de0964cd440243f493c9 ]

When sending plaintext data, we initially calculated the corresponding ciphertext length. However, if we later reduced the plaintext data length via socket policy, we failed to recalculate the ciphertext length.

This results in transmitting buffers containing uninitialized data during ciphertext transmission.

This causes uninitialized bytes to be appended after a complete "Application Data" packet, leading to errors on the receiving end when parsing TLS record.

---
 net/tls/tls_sw.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
net/tls/tls_sw.c +13 -0
index 432bce329392..8dabbbf52168 100644
@@ -822,6 +822,19 @@ static int bpf_exec_tx_verdict(struct sk_msg *msg, struct sock *sk,
 		delta = msg->sg.size;
 		psock->eval = sk_psock_msg_verdict(sk, psock, msg);
 		delta -= msg->sg.size;
+
+		if ((s32)delta > 0) {
+			/* It indicates that we executed bpf_msg_pop_data(),
+			 * causing the plaintext data size to decrease.
+			 * Therefore the encrypted data size also needs to
+			 * correspondingly decrease. We only need to subtract
+			 * delta to calculate the new ciphertext length since
+			 * ktls does not support block encryption.
+			 */
+			struct sk_msg *enc = &ctx->open_rec->msg_encrypted;
+
+			sk_msg_trim(sk, enc, enc->sg.size - delta);
+		}
 	}
 	if (msg->cork_bytes && msg->cork_bytes > msg->sg.size &&
 	    !enospc && !full_record) {
Signature · 1 line
2.39.5
author maintainer
#85 lore raw

PATCH 85/403 bpftool: Fix memory leak in dump_xx_nlmsg on realloc failure

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuan Chen <[email protected]>

[ Upstream commit 99fe8af069a9fa5b09140518b1364e35713a642e ]

In function dump_xx_nlmsg(), when realloc() fails to allocate memory, the original pointer to the buffer is overwritten with NULL. This causes a memory leak because the previously allocated buffer becomes unreachable without being freed.

Fixes 7900efc19214 ("tools/bpf: bpftool: improve output format for bpftool net")
---
 tools/bpf/bpftool/net.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
tools/bpf/bpftool/net.c +9 -6
index c6787a1daa48..c2953b2bf130 100644
@@ -87,17 +87,18 @@ static int dump_link_nlmsg(void *cookie, void *msg, struct nlattr **tb)
 {
 	struct bpf_netdev_t *netinfo = cookie;
 	struct ifinfomsg *ifinfo = msg;
+	struct ip_devname_ifindex *tmp;
 
 	if (netinfo->filter_idx > 0 && netinfo->filter_idx != ifinfo->ifi_index)
 		return 0;
 
 	if (netinfo->used_len == netinfo->array_len) {
-		netinfo->devices = realloc(netinfo->devices,
-			(netinfo->array_len + 16) *
-			sizeof(struct ip_devname_ifindex));
-		if (!netinfo->devices)
+		tmp = realloc(netinfo->devices,
+			(netinfo->array_len + 16) * sizeof(struct ip_devname_ifindex));
+		if (!tmp)
 			return -ENOMEM;
 
+		netinfo->devices = tmp;
 		netinfo->array_len += 16;
 	}
 	netinfo->devices[netinfo->used_len].ifindex = ifinfo->ifi_index;
@@ -116,6 +117,7 @@ static int dump_class_qdisc_nlmsg(void *cookie, void *msg, struct nlattr **tb)
 {
 	struct bpf_tcinfo_t *tcinfo = cookie;
 	struct tcmsg *info = msg;
+	struct tc_kind_handle *tmp;
 
 	if (tcinfo->is_qdisc) {
 		/* skip clsact qdisc */
@@ -127,11 +129,12 @@ static int dump_class_qdisc_nlmsg(void *cookie, void *msg, struct nlattr **tb)
 	}
 
 	if (tcinfo->used_len == tcinfo->array_len) {
-		tcinfo->handle_array = realloc(tcinfo->handle_array,
+		tmp = realloc(tcinfo->handle_array,
 			(tcinfo->array_len + 16) * sizeof(struct tc_kind_handle));
-		if (!tcinfo->handle_array)
+		if (!tmp)
 			return -ENOMEM;
 
+		tcinfo->handle_array = tmp;
 		tcinfo->array_len += 16;
 	}
 	tcinfo->handle_array[tcinfo->used_len].handle = info->tcm_handle;
Signature · 1 line
2.39.5
author maintainer
#86 lore raw

PATCH 86/403 caif: reduce stack size, again

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnd Bergmann <[email protected]>

[ Upstream commit b630c781bcf6ff87657146661816d0d30a902139 ]

I tried to fix the stack usage in this function a couple of years ago, but there is still a problem with the latest gcc versions in some configurations:

net/caif/cfctrl.c:553:1: error: the frame size of 1296 bytes is larger than 1280 bytes [-Werror=frame-larger-than=]

Reduce this once again, with a separate cfctrl_link_setup() function that holds the bulk of all the local variables. It also turns out that the param[] array that takes up a large portion of the stack is write-only and can be left out here.

Fixes ce6289661b14 ("caif: reduce stack size with KASAN")
---
 net/caif/cfctrl.c | 294 +++++++++++++++++++++++-----------------------
 1 file changed, 144 insertions(+), 150 deletions(-)
net/caif/cfctrl.c +144 -150
index d8cb4b2a076b..3eec293ab22f 100644
@@ -351,17 +351,154 @@ int cfctrl_cancel_req(struct cflayer *layr, struct cflayer *adap_layer)
 	return found;
 }
 
+static int cfctrl_link_setup(struct cfctrl *cfctrl, struct cfpkt *pkt, u8 cmdrsp)
+{
+	u8 len;
+	u8 linkid = 0;
+	enum cfctrl_srv serv;
+	enum cfctrl_srv servtype;
+	u8 endpoint;
+	u8 physlinkid;
+	u8 prio;
+	u8 tmp;
+	u8 *cp;
+	int i;
+	struct cfctrl_link_param linkparam;
+	struct cfctrl_request_info rsp, *req;
+
+	memset(&linkparam, 0, sizeof(linkparam));
+
+	tmp = cfpkt_extr_head_u8(pkt);
+
+	serv = tmp & CFCTRL_SRV_MASK;
+	linkparam.linktype = serv;
+
+	servtype = tmp >> 4;
+	linkparam.chtype = servtype;
+
+	tmp = cfpkt_extr_head_u8(pkt);
+	physlinkid = tmp & 0x07;
+	prio = tmp >> 3;
+
+	linkparam.priority = prio;
+	linkparam.phyid = physlinkid;
+	endpoint = cfpkt_extr_head_u8(pkt);
+	linkparam.endpoint = endpoint & 0x03;
+
+	switch (serv) {
+	case CFCTRL_SRV_VEI:
+	case CFCTRL_SRV_DBG:
+		if (CFCTRL_ERR_BIT & cmdrsp)
+			break;
+		/* Link ID */
+		linkid = cfpkt_extr_head_u8(pkt);
+		break;
+	case CFCTRL_SRV_VIDEO:
+		tmp = cfpkt_extr_head_u8(pkt);
+		linkparam.u.video.connid = tmp;
+		if (CFCTRL_ERR_BIT & cmdrsp)
+			break;
+		/* Link ID */
+		linkid = cfpkt_extr_head_u8(pkt);
+		break;
+
+	case CFCTRL_SRV_DATAGRAM:
+		linkparam.u.datagram.connid = cfpkt_extr_head_u32(pkt);
+		if (CFCTRL_ERR_BIT & cmdrsp)
+			break;
+		/* Link ID */
+		linkid = cfpkt_extr_head_u8(pkt);
+		break;
+	case CFCTRL_SRV_RFM:
+		/* Construct a frame, convert
+		 * DatagramConnectionID
+		 * to network format long and copy it out...
+		 */
+		linkparam.u.rfm.connid = cfpkt_extr_head_u32(pkt);
+		cp = (u8 *) linkparam.u.rfm.volume;
+		for (tmp = cfpkt_extr_head_u8(pkt);
+		     cfpkt_more(pkt) && tmp != '\0';
+		     tmp = cfpkt_extr_head_u8(pkt))
+			*cp++ = tmp;
+		*cp = '\0';
+
+		if (CFCTRL_ERR_BIT & cmdrsp)
+			break;
+		/* Link ID */
+		linkid = cfpkt_extr_head_u8(pkt);
+
+		break;
+	case CFCTRL_SRV_UTIL:
+		/* Construct a frame, convert
+		 * DatagramConnectionID
+		 * to network format long and copy it out...
+		 */
+		/* Fifosize KB */
+		linkparam.u.utility.fifosize_kb = cfpkt_extr_head_u16(pkt);
+		/* Fifosize bufs */
+		linkparam.u.utility.fifosize_bufs = cfpkt_extr_head_u16(pkt);
+		/* name */
+		cp = (u8 *) linkparam.u.utility.name;
+		caif_assert(sizeof(linkparam.u.utility.name)
+			     >= UTILITY_NAME_LENGTH);
+		for (i = 0; i < UTILITY_NAME_LENGTH && cfpkt_more(pkt); i++) {
+			tmp = cfpkt_extr_head_u8(pkt);
+			*cp++ = tmp;
+		}
+		/* Length */
+		len = cfpkt_extr_head_u8(pkt);
+		linkparam.u.utility.paramlen = len;
+		/* Param Data */
+		cp = linkparam.u.utility.params;
+		while (cfpkt_more(pkt) && len--) {
+			tmp = cfpkt_extr_head_u8(pkt);
+			*cp++ = tmp;
+		}
+		if (CFCTRL_ERR_BIT & cmdrsp)
+			break;
+		/* Link ID */
+		linkid = cfpkt_extr_head_u8(pkt);
+		/* Length */
+		len = cfpkt_extr_head_u8(pkt);
+		/* Param Data */
+		cfpkt_extr_head(pkt, NULL, len);
+		break;
+	default:
+		pr_warn("Request setup, invalid type (%d)\n", serv);
+		return -1;
+	}
+
+	rsp.cmd = CFCTRL_CMD_LINK_SETUP;
+	rsp.param = linkparam;
+	spin_lock_bh(&cfctrl->info_list_lock);
+	req = cfctrl_remove_req(cfctrl, &rsp);
+
+	if (CFCTRL_ERR_BIT == (CFCTRL_ERR_BIT & cmdrsp) ||
+		cfpkt_erroneous(pkt)) {
+		pr_err("Invalid O/E bit or parse error "
+				"on CAIF control channel\n");
+		cfctrl->res.reject_rsp(cfctrl->serv.layer.up, 0,
+				       req ? req->client_layer : NULL);
+	} else {
+		cfctrl->res.linksetup_rsp(cfctrl->serv.layer.up, linkid,
+					  serv, physlinkid,
+					  req ?  req->client_layer : NULL);
+	}
+
+	kfree(req);
+
+	spin_unlock_bh(&cfctrl->info_list_lock);
+
+	return 0;
+}
+
 static int cfctrl_recv(struct cflayer *layer, struct cfpkt *pkt)
 {
 	u8 cmdrsp;
 	u8 cmd;
-	int ret = -1;
-	u8 len;
-	u8 param[255];
+	int ret = 0;
 	u8 linkid = 0;
 	struct cfctrl *cfctrl = container_obj(layer);
-	struct cfctrl_request_info rsp, *req;
-
 
 	cmdrsp = cfpkt_extr_head_u8(pkt);
 	cmd = cmdrsp & CFCTRL_CMD_MASK;
@@ -374,150 +511,7 @@ static int cfctrl_recv(struct cflayer *layer, struct cfpkt *pkt)
 
 	switch (cmd) {
 	case CFCTRL_CMD_LINK_SETUP:
-		{
-			enum cfctrl_srv serv;
-			enum cfctrl_srv servtype;
-			u8 endpoint;
-			u8 physlinkid;
-			u8 prio;
-			u8 tmp;
-			u8 *cp;
-			int i;
-			struct cfctrl_link_param linkparam;
-			memset(&linkparam, 0, sizeof(linkparam));
-
-			tmp = cfpkt_extr_head_u8(pkt);
-
-			serv = tmp & CFCTRL_SRV_MASK;
-			linkparam.linktype = serv;
-
-			servtype = tmp >> 4;
-			linkparam.chtype = servtype;
-
-			tmp = cfpkt_extr_head_u8(pkt);
-			physlinkid = tmp & 0x07;
-			prio = tmp >> 3;
-
-			linkparam.priority = prio;
-			linkparam.phyid = physlinkid;
-			endpoint = cfpkt_extr_head_u8(pkt);
-			linkparam.endpoint = endpoint & 0x03;
-
-			switch (serv) {
-			case CFCTRL_SRV_VEI:
-			case CFCTRL_SRV_DBG:
-				if (CFCTRL_ERR_BIT & cmdrsp)
-					break;
-				/* Link ID */
-				linkid = cfpkt_extr_head_u8(pkt);
-				break;
-			case CFCTRL_SRV_VIDEO:
-				tmp = cfpkt_extr_head_u8(pkt);
-				linkparam.u.video.connid = tmp;
-				if (CFCTRL_ERR_BIT & cmdrsp)
-					break;
-				/* Link ID */
-				linkid = cfpkt_extr_head_u8(pkt);
-				break;
-
-			case CFCTRL_SRV_DATAGRAM:
-				linkparam.u.datagram.connid =
-				    cfpkt_extr_head_u32(pkt);
-				if (CFCTRL_ERR_BIT & cmdrsp)
-					break;
-				/* Link ID */
-				linkid = cfpkt_extr_head_u8(pkt);
-				break;
-			case CFCTRL_SRV_RFM:
-				/* Construct a frame, convert
-				 * DatagramConnectionID
-				 * to network format long and copy it out...
-				 */
-				linkparam.u.rfm.connid =
-				    cfpkt_extr_head_u32(pkt);
-				cp = (u8 *) linkparam.u.rfm.volume;
-				for (tmp = cfpkt_extr_head_u8(pkt);
-				     cfpkt_more(pkt) && tmp != '\0';
-				     tmp = cfpkt_extr_head_u8(pkt))
-					*cp++ = tmp;
-				*cp = '\0';
-
-				if (CFCTRL_ERR_BIT & cmdrsp)
-					break;
-				/* Link ID */
-				linkid = cfpkt_extr_head_u8(pkt);
-
-				break;
-			case CFCTRL_SRV_UTIL:
-				/* Construct a frame, convert
-				 * DatagramConnectionID
-				 * to network format long and copy it out...
-				 */
-				/* Fifosize KB */
-				linkparam.u.utility.fifosize_kb =
-				    cfpkt_extr_head_u16(pkt);
-				/* Fifosize bufs */
-				linkparam.u.utility.fifosize_bufs =
-				    cfpkt_extr_head_u16(pkt);
-				/* name */
-				cp = (u8 *) linkparam.u.utility.name;
-				caif_assert(sizeof(linkparam.u.utility.name)
-					     >= UTILITY_NAME_LENGTH);
-				for (i = 0;
-				     i < UTILITY_NAME_LENGTH
-				     && cfpkt_more(pkt); i++) {
-					tmp = cfpkt_extr_head_u8(pkt);
-					*cp++ = tmp;
-				}
-				/* Length */
-				len = cfpkt_extr_head_u8(pkt);
-				linkparam.u.utility.paramlen = len;
-				/* Param Data */
-				cp = linkparam.u.utility.params;
-				while (cfpkt_more(pkt) && len--) {
-					tmp = cfpkt_extr_head_u8(pkt);
-					*cp++ = tmp;
-				}
-				if (CFCTRL_ERR_BIT & cmdrsp)
-					break;
-				/* Link ID */
-				linkid = cfpkt_extr_head_u8(pkt);
-				/* Length */
-				len = cfpkt_extr_head_u8(pkt);
-				/* Param Data */
-				cfpkt_extr_head(pkt, &param, len);
-				break;
-			default:
-				pr_warn("Request setup, invalid type (%d)\n",
-					serv);
-				goto error;
-			}
-
-			rsp.cmd = cmd;
-			rsp.param = linkparam;
-			spin_lock_bh(&cfctrl->info_list_lock);
-			req = cfctrl_remove_req(cfctrl, &rsp);
-
-			if (CFCTRL_ERR_BIT == (CFCTRL_ERR_BIT & cmdrsp) ||
-				cfpkt_erroneous(pkt)) {
-				pr_err("Invalid O/E bit or parse error "
-						"on CAIF control channel\n");
-				cfctrl->res.reject_rsp(cfctrl->serv.layer.up,
-						       0,
-						       req ? req->client_layer
-						       : NULL);
-			} else {
-				cfctrl->res.linksetup_rsp(cfctrl->serv.
-							  layer.up, linkid,
-							  serv, physlinkid,
-							  req ? req->
-							  client_layer : NULL);
-			}
-
-			kfree(req);
-
-			spin_unlock_bh(&cfctrl->info_list_lock);
-		}
+		ret = cfctrl_link_setup(cfctrl, pkt, cmdrsp);
 		break;
 	case CFCTRL_CMD_LINK_DESTROY:
 		linkid = cfpkt_extr_head_u8(pkt);
@@ -544,9 +538,9 @@ static int cfctrl_recv(struct cflayer *layer, struct cfpkt *pkt)
 		break;
 	default:
 		pr_err("Unrecognized Control Frame\n");
+		ret = -1;
 		goto error;
 	}
-	ret = 0;
 error:
 	cfpkt_destroy(pkt);
 	return ret;
Signature · 1 line
2.39.5
author maintainer
#87 lore raw

PATCH 87/403 wifi: rtl818x: Kill URBs before clearing tx status queue

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniil Dulov <[email protected]>

[ Upstream commit 16d8fd74dbfca0ea58645cd2fca13be10cae3cdd ]

In rtl8187_stop() move the call of usb_kill_anchored_urbs() before clearing b_tx_status.queue. This change prevents callbacks from using already freed skb due to anchor was not killed before freeing such skb.

 BUG: kernel NULL pointer dereference, address: 0000000000000080
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: Oops: 0000 [#1] SMP NOPTI
 CPU: 7 UID: 0 PID: 0 Comm: swapper/7 Not tainted 6.15.0 #8 PREEMPT(voluntary)
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
 RIP: 0010:ieee80211_tx_status_irqsafe+0x21/0xc0 [mac80211]
 Call Trace:
  <IRQ>
  rtl8187_tx_cb+0x116/0x150 [rtl8187]
  __usb_hcd_giveback_urb+0x9d/0x120
  usb_giveback_urb_bh+0xbb/0x140
  process_one_work+0x19b/0x3c0
  bh_worker+0x1a7/0x210
  tasklet_action+0x10/0x30
  handle_softirqs+0xf0/0x340
  __irq_exit_rcu+0xcd/0xf0
  common_interrupt+0x85/0xa0
  </IRQ>

Tested on RTL8187BvE device.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes c1db52b9d27e ("rtl8187: Use usb anchor facilities to manage urbs")
---
 drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c +2 -1
index eb68b2d3caa1..c9df185dc3f4 100644
@@ -1041,10 +1041,11 @@ static void rtl8187_stop(struct ieee80211_hw *dev)
 	rtl818x_iowrite8(priv, &priv->map->CONFIG4, reg | RTL818X_CONFIG4_VCOOFF);
 	rtl818x_iowrite8(priv, &priv->map->EEPROM_CMD, RTL818X_EEPROM_CMD_NORMAL);
 
+	usb_kill_anchored_urbs(&priv->anchored);
+
 	while ((skb = skb_dequeue(&priv->b_tx_status.queue)))
 		dev_kfree_skb_any(skb);
 
-	usb_kill_anchored_urbs(&priv->anchored);
 	mutex_unlock(&priv->conf_mutex);
 
 	if (!priv->is_rtl8187b)
Signature · 1 line
2.39.5
author maintainer
#88 lore raw

PATCH 88/403 wifi: iwlwifi: Fix memory leak in iwl_mvm_init()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiu Jianfeng <[email protected]>

[ Upstream commit ed2e916c890944633d6826dce267579334f63ea5 ]

When iwl_opmode_register() fails, it does not unregster rate control, which will cause a memory leak issue, this patch fixes it.

Fixes 9f66a397c877 ("iwlwifi: mvm: rs: add ops for the new rate scaling in the FW")
---
 drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/ops.c +3 -1
index 18c5975d7c03..70ba91d2bedf 100644
@@ -123,8 +123,10 @@ static int __init iwl_mvm_init(void)
 	}
 
 	ret = iwl_opmode_register("iwlmvm", &iwl_mvm_ops);
-	if (ret)
+	if (ret) {
 		pr_err("Unable to register MVM op_mode: %d\n", ret);
+		iwl_mvm_rate_control_unregister();
+	}
 
 	return ret;
 }
Signature · 1 line
2.39.5
author maintainer
#89 lore raw

PATCH 89/403 iwlwifi: Add missing check for alloc_ordered_workqueue

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jiasheng Jiang <[email protected]>

[ Upstream commit 90a0d9f339960448a3acc1437a46730f975efd6a ]

Add check for the return value of alloc_ordered_workqueue since it may return NULL pointer.

Fixes b481de9ca074 ("[IWLWIFI]: add iwlwifi wireless drivers")
---
 drivers/net/wireless/intel/iwlwifi/dvm/main.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/net/wireless/intel/iwlwifi/dvm/main.c +9 -2
index 4f2789bb3b5b..9ca704a2c679 100644
@@ -1055,9 +1055,11 @@ static void iwl_bg_restart(struct work_struct *data)
  *
  *****************************************************************************/
 
-static void iwl_setup_deferred_work(struct iwl_priv *priv)
+static int iwl_setup_deferred_work(struct iwl_priv *priv)
 {
 	priv->workqueue = alloc_ordered_workqueue(DRV_NAME, 0);
+	if (!priv->workqueue)
+		return -ENOMEM;
 
 	INIT_WORK(&priv->restart, iwl_bg_restart);
 	INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
@@ -1074,6 +1076,8 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv)
 	timer_setup(&priv->statistics_periodic, iwl_bg_statistics_periodic, 0);
 
 	timer_setup(&priv->ucode_trace, iwl_bg_ucode_trace, 0);
+
+	return 0;
 }
 
 void iwl_cancel_deferred_work(struct iwl_priv *priv)
@@ -1469,7 +1473,9 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	/********************
 	 * 6. Setup services
 	 ********************/
-	iwl_setup_deferred_work(priv);
+	if (iwl_setup_deferred_work(priv))
+		goto out_uninit_drv;
+
 	iwl_setup_rx_handlers(priv);
 
 	iwl_power_initialize(priv);
@@ -1507,6 +1513,7 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans,
 	iwl_cancel_deferred_work(priv);
 	destroy_workqueue(priv->workqueue);
 	priv->workqueue = NULL;
+out_uninit_drv:
 	iwl_uninit_drv(priv);
 out_free_eeprom_blob:
 	kfree(priv->eeprom_blob);
Signature · 1 line
2.39.5
author maintainer
#90 lore raw

PATCH 90/403 tcp: fix tcp_ofo_queue() to avoid including too much DUP SACK range

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: xin.guo <[email protected]>

[ Upstream commit a041f70e573e185d5d5fdbba53f0db2fbe7257ad ]

If the new coming segment covers more than one skbs in the ofo queue, and which seq is equal to rcv_nxt, then the sequence range that is duplicated will be sent as DUP SACK, the detail as below, in step6, the {501,2001} range is clearly including too much DUP SACK range, in violation of RFC 2883 rules.

1. client > server: Flags [.], seq 501:1001, ack 1325288529, win 20000, length 500
2. server > client: Flags [.], ack 1, [nop,nop,sack 1 {501:1001}], length 0
3. client > server: Flags [.], seq 1501:2001, ack 1325288529, win 20000, length 500
4. server > client: Flags [.], ack 1, [nop,nop,sack 2 {1501:2001} {501:1001}], length 0
5. client > server: Flags [.], seq 1:2001, ack 1325288529, win 20000, length 2000
6. server > client: Flags [.], ack 2001, [nop,nop,sack 1 {501:2001}], length 0

After this fix, the final ACK is as below:

6. server > client: Flags [.], ack 2001, options [nop,nop,sack 1 {501:1001}], length 0

[edumazet] added a new packetdrill test in the following patch.

---
 net/ipv4/tcp_input.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
net/ipv4/tcp_input.c +2 -1
index 6b3bb8a59035..9d65e684e626 100644
@@ -4588,8 +4588,9 @@ static void tcp_ofo_queue(struct sock *sk)
 
 		if (before(TCP_SKB_CB(skb)->seq, dsack_high)) {
 			__u32 dsack = dsack_high;
+
 			if (before(TCP_SKB_CB(skb)->end_seq, dsack_high))
-				dsack_high = TCP_SKB_CB(skb)->end_seq;
+				dsack = TCP_SKB_CB(skb)->end_seq;
 			tcp_dsack_extend(sk, TCP_SKB_CB(skb)->seq, dsack);
 		}
 		p = rb_next(p);
Signature · 1 line
2.39.5
author maintainer
#91 lore raw

PATCH 91/403 m68k: Dont unregister boot console needlessly

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Finn Thain <[email protected]>

[ Upstream commit 83f672a7f69ec38b1bbb27221e342937f68c11c7 ]

When MACH_IS_MVME147, the boot console calls mvme147_scc_write() to generate console output. That will continue to work even after debug_cons_nputs() becomes unavailable so there's no need to unregister the boot console.

Take the opportunity to remove a repeated MACH_IS_* test. Use the actual .write method (instead of a wrapper) and test that pointer instead. This means adding an unused parameter to debug_cons_nputs() for consistency with the struct console API.

early_printk.c is only built when CONFIG_EARLY_PRINTK=y. As of late, head.S is only built when CONFIG_MMU_MOTOROLA=y. So let the former symbol depend on the latter, to obviate some ifdef conditionals.

---
 arch/m68k/Kconfig.debug         |  2 +-
 arch/m68k/kernel/early_printk.c | 42 +++++++++++----------------------
 arch/m68k/kernel/head.S         |  8 +++----
 3 files changed, 19 insertions(+), 33 deletions(-)
arch/m68k/Kconfig.debug +1 -1
index f43643111eaf..f9fa89ba259d 100644
@@ -10,7 +10,7 @@ config BOOTPARAM_STRING
 
 config EARLY_PRINTK
 	bool "Early printk"
-	depends on !(SUN3 || M68000 || COLDFIRE)
+	depends on MMU_MOTOROLA
 	help
           Write kernel log output directly to a serial port.
           Where implemented, output goes to the framebuffer as well.
arch/m68k/kernel/early_printk.c +14 -28

65 lines not on this page · raw message

arch/m68k/kernel/head.S +4 -4
index a54788458ca3..692cdcfb3520 100644
@@ -3242,8 +3242,8 @@ func_return	putn
  *	turns around and calls the internal routines.  This routine
  *	is used by the boot console.
  *
- *	The calling parameters are:
- *		void debug_cons_nputs(const char *str, unsigned length)
+ *	The function signature is -
+ *		void debug_cons_nputs(struct console *c, const char *s, unsigned int n)
  *
  *	This routine does NOT understand variable arguments only
  *	simple strings!
@@ -3252,8 +3252,8 @@ ENTRY(debug_cons_nputs)
 	moveml	%d0/%d1/%a0,%sp@-
 	movew	%sr,%sp@-
 	ori	#0x0700,%sr
-	movel	%sp@(18),%a0		/* fetch parameter */
-	movel	%sp@(22),%d1		/* fetch parameter */
+	movel	%sp@(22),%a0		/* char *s */
+	movel	%sp@(26),%d1		/* unsigned int n */
 	jra	2f
 1:
 #ifdef CONSOLE_DEBUG
Signature · 1 line
2.39.5
author maintainer
#92 lore raw

PATCH 92/403 drm/amd/pm/powerplay/hwmgr/smu_helper: fix order of mask and value

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fedor Pchelkin <[email protected]>

[ Upstream commit a54e4639c4ef37a0241bac7d2a77f2e6ffb57099 ]

There is a small typo in phm_wait_on_indirect_register().

Swap mask and value arguments provided to phm_wait_on_register() so that they satisfy the function signature and actual usage scheme.

Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

In practice this doesn't fix any issues because the only place this function is used uses the same value for the value and mask.

Fixes 3bace3591493 ("drm/amd/powerplay: add hardware manager sub-component")
---
 drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/gpu/drm/amd/powerplay/hwmgr/smu_helper.c +1 -1
index d09690fca452..8a1ad9305a21 100644
@@ -148,7 +148,7 @@ int phm_wait_on_indirect_register(struct pp_hwmgr *hwmgr,
 	}
 
 	cgs_write_register(hwmgr->device, indirect_port, index);
-	return phm_wait_on_register(hwmgr, indirect_port + 1, mask, value);
+	return phm_wait_on_register(hwmgr, indirect_port + 1, value, mask);
 }
 
 int phm_wait_for_register_unequal(struct pp_hwmgr *hwmgr,
Signature · 1 line
2.39.5
author maintainer
#93 lore raw

PATCH 93/403 netfilter: nf_tables: adjust lockdep assertions handling

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Fedor Pchelkin <[email protected]>

[ Upstream commit 8df1b40de76979bb8e975201d07b71103d5de820 ]

It's needed to check the return value of lockdep_commit_lock_is_held(), otherwise there's no point in this assertion as it doesn't print any debug information on itself.

Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

Fixes b04df3da1b5c ("netfilter: nf_tables: do not defer rule destruction via call_rcu")
---
 net/netfilter/nf_tables_api.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/netfilter/nf_tables_api.c +2 -2
index 9e20fb759cb8..54c43f1cceac 100644
@@ -2823,7 +2823,7 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx,
 static void nf_tables_rule_release(const struct nft_ctx *ctx,
 				   struct nft_rule *rule)
 {
-	lockdep_commit_lock_is_held(ctx->net);
+	WARN_ON_ONCE(!lockdep_commit_lock_is_held(ctx->net));
 
 	nft_rule_expr_deactivate(ctx, rule, NFT_TRANS_RELEASE);
 	nf_tables_rule_destroy(ctx, rule);
@@ -4173,7 +4173,7 @@ void nf_tables_deactivate_set(const struct nft_ctx *ctx, struct nft_set *set,
 			      struct nft_set_binding *binding,
 			      enum nft_trans_phase phase)
 {
-	lockdep_commit_lock_is_held(ctx->net);
+	WARN_ON_ONCE(!lockdep_commit_lock_is_held(ctx->net));
 
 	switch (phase) {
 	case NFT_TRANS_PREPARE_ERROR:
Signature · 1 line
2.39.5
author maintainer
#94 lore raw

PATCH 94/403 arch: powerpc: defconfig: Drop obsolete CONFIG_NET_CLS_TCINDEX

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Korsnes <[email protected]>

[ Upstream commit 75cd37c5f28b85979fd5a65174013010f6b78f27 ]

This option was removed from the Kconfig in commit 8c710f75256b ("net/sched: Retire tcindex classifier") but it was not removed from the defconfigs.

---
 arch/powerpc/configs/ppc6xx_defconfig | 1 -
 1 file changed, 1 deletion(-)
arch/powerpc/configs/ppc6xx_defconfig +0 -1
index b75b62b094b5..319fe81a4a39 100644
@@ -274,7 +274,6 @@ CONFIG_NET_SCH_DSMARK=m
 CONFIG_NET_SCH_NETEM=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
 CONFIG_NET_CLS_U32=m
Signature · 1 line
2.39.5
author maintainer
#95 lore raw

PATCH 95/403 net/sched: Restrict conditions for adding duplicating netems to qdisc tree

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: William Liu <[email protected]>

[ Upstream commit ec8e0e3d7adef940cdf9475e2352c0680189d14e ]

netem_enqueue's duplication prevention logic breaks when a netem resides in a qdisc tree with other netems - this can lead to a soft lockup and OOM loop in netem_dequeue, as seen in [1]. Ensure that a duplicating netem cannot exist in a tree with other netems.

Previous approaches suggested in discussions in chronological order:

1) Track duplication status or ttl in the sk_buff struct. Considered too specific a use case to extend such a struct, though this would be a resilient fix and address other previous and potential future DOS bugs like the one described in loopy fun [2].

2) Restrict netem_enqueue recursion depth like in act_mirred with a per cpu variable. However, netem_dequeue can call enqueue on its child, and the depth restriction could be bypassed if the child is a netem.

3) Use the same approach as in 2, but add metadata in netem_skb_cb to handle the netem_dequeue case and track a packet's involvement in duplication. This is an overly complex approach, and Jamal notes that the skb cb can be overwritten to circumvent this safeguard.

4) Prevent the addition of a netem to a qdisc tree if its ancestral path contains a netem. However, filters and actions can cause a packet to change paths when re-enqueued to the root from netem duplication, leading us to the current solution: prevent a duplicating netem from inhabiting the same tree as other netems.

[1] https://lore.kernel.org/netdev/8DuRWwfqjoRDLDmBMlIfbrsZg9Gx50DHJc1ilxsEBNe2D6NMoigR_eIRIG0LOjMc3r10nUUZtArXx4oZBIdUfZQrwjcQhdinnMis_0G7VEk=@willsroot.io/
[2] https://lwn.net/Articles/719297/

---
 net/sched/sch_netem.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)
net/sched/sch_netem.c +40 -0
index 27bd18c74e85..cdf2df194d24 100644
@@ -962,6 +962,41 @@ static int parse_attr(struct nlattr *tb[], int maxtype, struct nlattr *nla,
 	return 0;
 }
 
+static const struct Qdisc_class_ops netem_class_ops;
+
+static int check_netem_in_tree(struct Qdisc *sch, bool duplicates,
+			       struct netlink_ext_ack *extack)
+{
+	struct Qdisc *root, *q;
+	unsigned int i;
+
+	root = qdisc_root_sleeping(sch);
+
+	if (sch != root && root->ops->cl_ops == &netem_class_ops) {
+		if (duplicates ||
+		    ((struct netem_sched_data *)qdisc_priv(root))->duplicate)
+			goto err;
+	}
+
+	if (!qdisc_dev(root))
+		return 0;
+
+	hash_for_each(qdisc_dev(root)->qdisc_hash, i, q, hash) {
+		if (sch != q && q->ops->cl_ops == &netem_class_ops) {
+			if (duplicates ||
+			    ((struct netem_sched_data *)qdisc_priv(q))->duplicate)
+				goto err;
+		}
+	}
+
+	return 0;
+
+err:
+	NL_SET_ERR_MSG(extack,
+		       "netem: cannot mix duplicating netems with other netems in tree");
+	return -EINVAL;
+}
+
 /* Parse netlink message to set options */
 static int netem_change(struct Qdisc *sch, struct nlattr *opt,
 			struct netlink_ext_ack *extack)
@@ -1023,6 +1058,11 @@ static int netem_change(struct Qdisc *sch, struct nlattr *opt,
 	q->gap = qopt->gap;
 	q->counter = 0;
 	q->loss = qopt->loss;
+
+	ret = check_netem_in_tree(sch, qopt->duplicate, extack);
+	if (ret)
+		goto unlock;
+
 	q->duplicate = qopt->duplicate;
 
 	/* for compatibility with earlier versions.
Signature · 1 line
2.39.5
author maintainer
#96 lore raw

PATCH 96/403 wifi: rtl8xxxu: Fix RX skb size for aggregation disabled

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Martin Kaistra <[email protected]>

[ Upstream commit d76a1abcf57734d2bcd4a7ec051617edd4513d7f ]

Commit 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for phystats") increased the skb size when aggregation is enabled but decreased it for the aggregation disabled case.

As a result, if a frame near the maximum size is received, rtl8xxxu_rx_complete() is called with status -EOVERFLOW and then the driver starts to malfunction and no further communication is possible.

Restore the skb size in the aggregation disabled case.

Fixes 1e5b3b3fe9e0 ("rtl8xxxu: Adjust RX skb size to include space for phystats")
---
 drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +1 -1
index 5611f00ef0bd..81d1c544313f 100644
@@ -5387,7 +5387,7 @@ static int rtl8xxxu_submit_rx_urb(struct rtl8xxxu_priv *priv,
 		skb_size = fops->rx_agg_buf_size;
 		skb_size += (rx_desc_sz + sizeof(struct rtl8723au_phy_stats));
 	} else {
-		skb_size = IEEE80211_MAX_FRAME_LEN;
+		skb_size = IEEE80211_MAX_FRAME_LEN + rx_desc_sz;
 	}
 
 	skb = __netdev_alloc_skb(NULL, skb_size, GFP_KERNEL);
Signature · 1 line
2.39.5
author maintainer
#97 lore raw

PATCH 97/403 mwl8k: Add missing check after DMA map

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

[ Upstream commit 50459501b9a212dbe7a673727589ee105a8a9954 ]

The DMA map functions can fail and should be tested for errors. If the mapping fails, unmap and return an error.

Fixes 788838ebe8a4 ("mwl8k: use pci_unmap_addr{,set}() to keep track of unmap addresses on rx")
---
 drivers/net/wireless/marvell/mwl8k.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/wireless/marvell/mwl8k.c +4 -0
index abd5c8670bc4..a0c15af1b167 100644
@@ -1220,6 +1220,10 @@ static int rxq_refill(struct ieee80211_hw *hw, int index, int limit)
 
 		addr = pci_map_single(priv->pdev, skb->data,
 				      MWL8K_RX_MAXSZ, DMA_FROM_DEVICE);
+		if (dma_mapping_error(&priv->pdev->dev, addr)) {
+			kfree_skb(skb);
+			break;
+		}
 
 		rxq->rxd_count++;
 		rx = rxq->tail++;
Signature · 1 line
2.39.5
author maintainer
#98 lore raw

PATCH 98/403 Reapply "wifi: mac80211: Update skbs control block key in ieee80211_tx_dequeue()"

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Remi Pommarel <[email protected]>

[ Upstream commit 754fe848b3b297fc85ec24cd959bad22b6df8cb8 ]

This reverts commit 0937cb5f345c ("Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"").

This commit broke TX with 802.11 encapsulation HW offloading, now that this is fixed, reapply it.

---
 net/mac80211/tx.c | 1 +
 1 file changed, 1 insertion(+)
net/mac80211/tx.c +1 -0
index 461cff7b94ad..f8d72f3e4def 100644
@@ -3661,6 +3661,7 @@ struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw,
 	 * The key can be removed while the packet was queued, so need to call
 	 * this here to get the current key.
 	 */
+	info->control.hw_key = NULL;
 	r = ieee80211_tx_h_select_key(&tx);
 	if (r != TX_CONTINUE) {
 		ieee80211_free_txskb(&local->hw, skb);
Signature · 1 line
2.39.5
#99 lore raw

Re: [PATCH 5.4 098/403] Reapply "wifi: mac80211: Update skbs control block key in ieee80211_tx_dequeue()"

Hi Greg,

I noticed that only [PATCH 2/2] from the series

[PATCH wireless 0/2] Fix ieee80211_tx_h_select_key() for 802.11 encaps offloading [1]

was backported to 5.4-stable, while [PATCH 1/2] is missing.

It looks like the 1st patch is the prerequisite patch to apply the 2nd patch.

[1] https://lore.kernel.org/all/[email protected]/

Thanks,
Sherry

author maintainer
#100 lore raw

Re: [PATCH 5.4 098/403] Reapply "wifi: mac80211: Update skbs control block key in ieee80211_tx_dequeue()"

Quoted 11 lines · Sherry Yang

Hi Greg,

I noticed that only [PATCH 2/2] from the series

[PATCH wireless 0/2] Fix ieee80211_tx_h_select_key() for 802.11 encaps offloading [1]

was backported to 5.4-stable, while [PATCH 1/2] is missing.

It looks like the 1st patch is the prerequisite patch to apply the 2nd patch.

[1] https://lore.kernel.org/all/[email protected]

What is the git id of the patch you feel is missing?

thanks,

greg k-h

#101 lore raw

Re: [PATCH 5.4 098/403] Reapply "wifi: mac80211: Update skbs control block key in ieee80211_tx_dequeue()"

Quoted 11 lines · Greg KH
Quoted 6 lines · Sherry Yang

Hi Greg,

I noticed that only [PATCH 2/2] from the series

[PATCH wireless 0/2] Fix ieee80211_tx_h_select_key() for 802.11 encaps offloading [1]

Quoted 7 lines
Quoted 5 lines

was backported to 5.4-stable, while [PATCH 1/2] is missing.

It looks like the 1st patch is the prerequisite patch to apply the 2nd patch.

[1] https://urldefense.com/v3/__https://lore.kernel.org/all/[email protected]__;!!ACWV5N9M2RV99hQ!ITMqVu4PcbzGTShSCka7THPXkavGtJSDV14NENhXrSlnq5NVYm5c44uQujhYeIJ-y6oHMzBYuTV7qUh-7_ENrMBs$

What is the git id of the patch you feel is missing?

9b096abd5454 (“wifi: mac80211: Check 802.11 encaps offloading in ieee80211_tx_h_select_key()”) in linux-stable-5.15.y

Thanks,
Sherry

author maintainer
#102 lore raw

Re: [PATCH 5.4 098/403] Reapply "wifi: mac80211: Update skbs control block key in ieee80211_tx_dequeue()"

Quoted 13 lines · Sherry Yang
Quoted 13 lines · Greg KH
Quoted 8 lines · Sherry Yang

Hi Greg,

I noticed that only [PATCH 2/2] from the series

[PATCH wireless 0/2] Fix ieee80211_tx_h_select_key() for 802.11 encaps offloading [1]

was backported to 5.4-stable, while [PATCH 1/2] is missing.

Quoted 7 lines
Quoted 5 lines
Quoted 3 lines

It looks like the 1st patch is the prerequisite patch to apply the 2nd patch.

[1] https://urldefense.com/v3/__https://lore.kernel.org/all/[email protected]__;!!ACWV5N9M2RV99hQ!ITMqVu4PcbzGTShSCka7THPXkavGtJSDV14NENhXrSlnq5NVYm5c44uQujhYeIJ-y6oHMzBYuTV7qUh-7_ENrMBs$

What is the git id of the patch you feel is missing?

9b096abd5454 (“wifi: mac80211: Check 802.11 encaps offloading in ieee80211_tx_h_select_key()”) in linux-stable-5.15.y

So you really mean 4037c468d1b3 ("wifi: mac80211: Check 802.11 encaps offloading in ieee80211_tx_h_select_key()") needs to be backported to 5.4.y as well?

thanks,

greg k-h

author maintainer
#103 lore raw

PATCH 99/403 wifi: brcmfmac: fix P2P discovery failure in P2P peer due to missing P2P IE

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Gokul Sivakumar <[email protected]>

[ Upstream commit 579bf8037b70b644a674c126a32bbb2212cf5c21 ]

After commit bd99a3013bdc ("brcmfmac: move configuration of probe request IEs"), the probe request MGMT IE addition operation brcmf_vif_set_mgmt_ie() got moved from the brcmf_p2p_scan_prep() to the brcmf_cfg80211_scan().

Because of this, as part of the scan request handler for the P2P Discovery, vif struct used for adding the Probe Request P2P IE in firmware got changed from the P2PAPI_BSSCFG_DEVICE vif to P2PAPI_BSSCFG_PRIMARY vif incorrectly. So the firmware stopped adding P2P IE to the outgoing P2P Discovery probe requests frames and the other P2P peers were unable to discover this device causing a regression on the P2P feature.

To fix this, while setting the P2P IE in firmware, properly use the vif of the P2P discovery wdev on which the driver received the P2P scan request. This is done by not changing the vif pointer, until brcmf_vif_set_mgmt_ie() is completed.

Fixes bd99a3013bdc ("brcmfmac: move configuration of probe request IEs")
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c   | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +4 -4
index 668c8897c109..f9508d71fc6c 100644
@@ -1118,10 +1118,6 @@ brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
 		return -EAGAIN;
 	}
 
-	/* If scan req comes for p2p0, send it over primary I/F */
-	if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
-		vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
-
 	brcmf_dbg(SCAN, "START ESCAN\n");
 
 	cfg->scan_request = request;
@@ -1137,6 +1133,10 @@ brcmf_cfg80211_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request)
 	if (err)
 		goto scan_out;
 
+	/* If scan req comes for p2p0, send it over primary I/F */
+	if (vif == cfg->p2p.bss_idx[P2PAPI_BSSCFG_DEVICE].vif)
+		vif = cfg->p2p.bss_idx[P2PAPI_BSSCFG_PRIMARY].vif;
+
 	err = brcmf_do_escan(vif->ifp, request);
 	if (err)
 		goto scan_out;
Signature · 1 line
2.39.5
author maintainer
#104 lore raw

PATCH 100/403 can: kvaser_pciefd: Store device channel index

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jimmy Assarsson <[email protected]>

[ Upstream commit d54b16b40ddadb7d0a77fff48af7b319a0cd6aae ]

Store device channel index in netdev.dev_port.

Fixes 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
---
 drivers/net/can/kvaser_pciefd.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/can/kvaser_pciefd.c +1 -0
index 560a0a5ba6f3..f269b5faa03a 100644
@@ -953,6 +953,7 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie)
 		can->err_rep_cnt = 0;
 		can->bec.txerr = 0;
 		can->bec.rxerr = 0;
+		can->can.dev->dev_port = i;
 
 		init_completion(&can->start_comp);
 		init_completion(&can->flush_comp);
Signature · 1 line
2.39.5
author maintainer
#105 lore raw

PATCH 101/403 can: kvaser_usb: Assign netdev.dev_port based on device channel index

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jimmy Assarsson <[email protected]>

[ Upstream commit c151b06a087a61c7a1790b75ee2f1d6edb6a8a45 ]

Assign netdev.dev_port based on the device channel index, to indicate the port number of the network device.
While this driver already uses netdev.dev_id for that purpose, dev_port is more appropriate. However, retain dev_id to avoid potential regressions.

Fixes 3e66d0138c05 ("can: populate netdev::dev_id for udev discrimination")
---
 drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +1 -0
index a96b22398407..602f0b3bbcdf 100644
@@ -813,6 +813,7 @@ static int kvaser_usb_init_one(struct kvaser_usb *dev, int channel)
 
 	SET_NETDEV_DEV(netdev, &dev->intf->dev);
 	netdev->dev_id = channel;
+	netdev->dev_port = channel;
 
 	dev->nets[channel] = priv;
 
Signature · 1 line
2.39.5
author maintainer
#106 lore raw

PATCH 102/403 netfilter: xt_nfacct: dont assume acct name is null-terminated

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Westphal <[email protected]>

[ Upstream commit bf58e667af7d96c8eb9411f926a0a0955f41ce21 ]

BUG: KASAN: slab-out-of-bounds in .. lib/vsprintf.c:721
Read of size 1 at addr ffff88801eac95c8 by task syz-executor183/5851
[..]
 string+0x231/0x2b0 lib/vsprintf.c:721
 vsnprintf+0x739/0xf00 lib/vsprintf.c:2874
 [..]
 nfacct_mt_checkentry+0xd2/0xe0 net/netfilter/xt_nfacct.c:41
 xt_check_match+0x3d1/0xab0 net/netfilter/x_tables.c:523

nfnl_acct_find_get() handles non-null input, but the error printk relied on its presence.

Reported-by [email protected]
Fixes ceb98d03eac5 ("netfilter: xtables: add nfacct match to support extended accounting")
---
 net/netfilter/xt_nfacct.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
net/netfilter/xt_nfacct.c +2 -2
index 5aab6df74e0f..68b07476f754 100644
@@ -38,8 +38,8 @@ nfacct_mt_checkentry(const struct xt_mtchk_param *par)
 
 	nfacct = nfnl_acct_find_get(par->net, info->name);
 	if (nfacct == NULL) {
-		pr_info_ratelimited("accounting object `%s' does not exists\n",
-				    info->name);
+		pr_info_ratelimited("accounting object `%.*s' does not exist\n",
+				    NFACCT_NAME_MAX, info->name);
 		return -ENOENT;
 	}
 	info->nfacct = nfacct;
Signature · 1 line
2.39.5
author maintainer
#107 lore raw

PATCH 103/403 selftests: rtnetlink.sh: remove esp4_offload after test

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiumei Mu <[email protected]>

[ Upstream commit 5b32321fdaf3fd1a92ec726af18765e225b0ee2b ]

The esp4_offload module, loaded during IPsec offload tests, should be reset to its default settings after testing.
Otherwise, leaving it enabled could unintentionally affect subsequence test cases by keeping offload active.

Without this fix:

$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
esp4_offload           12288  0
esp4                   32768  1 esp4_offload

With this fix:

$ lsmod | grep offload; ./rtnetlink.sh -t kci_test_ipsec_offload ; lsmod | grep offload;
PASS: ipsec_offload
---
 tools/testing/selftests/net/rtnetlink.sh | 6 ++++++
 1 file changed, 6 insertions(+)
tools/testing/selftests/net/rtnetlink.sh +6 -0
index 3b929e031f59..0c343954a17b 100755
@@ -744,6 +744,11 @@ kci_test_ipsec_offload()
 	sysfsf=$sysfsd/ipsec
 	sysfsnet=/sys/bus/netdevsim/devices/netdevsim0/net/
 	probed=false
+	esp4_offload_probed_default=false
+
+	if lsmod | grep -q esp4_offload; then
+		esp4_offload_probed_default=true
+	fi
 
 	# setup netdevsim since dummydev doesn't have offload support
 	if [ ! -w /sys/bus/netdevsim/new_device ] ; then
@@ -833,6 +838,7 @@ EOF
 	fi
 
 	# clean up any leftovers
+	! "$esp4_offload_probed_default" && lsmod | grep -q esp4_offload && rmmod esp4_offload
 	echo 0 > /sys/bus/netdevsim/del_device
 	$probed && rmmod netdevsim
 
Signature · 1 line
2.39.5
author maintainer
#108 lore raw

PATCH 104/403 vrf: Drop existing dst reference in vrf_ip6_input_dst

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stanislav Fomichev <[email protected]>

[ Upstream commit f388f807eca1de9e6e70f9ffb1a573c3811c4215 ]

Commit ff3fbcdd4724 ("selftests: tc: Add generic erspan_opts matching support for tc-flower") started triggering the following kmemleak warning:

unreferenced object 0xffff888015fb0e00 (size 512):
comm "softirq", pid 0, jiffies 4294679065 hex dump (first 32 bytes):

    00 00 00 00 00 00 00 00 40 d2 85 9e ff ff ff ff  ........@.......
    41 69 59 9d ff ff ff ff 00 00 00 00 00 00 00 00  AiY.............
  backtrace (crc 30b71e8b):
    __kmalloc_noprof+0x359/0x460
    metadata_dst_alloc+0x28/0x490
    erspan_rcv+0x4f1/0x1160 [ip_gre]
    gre_rcv+0x217/0x240 [ip_gre]
    gre_rcv+0x1b8/0x400 [gre]
    ip_protocol_deliver_rcu+0x31d/0x3a0
    ip_local_deliver_finish+0x37d/0x620
    ip_local_deliver+0x174/0x460
    ip_rcv+0x52b/0x6b0
    __netif_receive_skb_one_core+0x149/0x1a0
    process_backlog+0x3c8/0x1390
    __napi_poll.constprop.0+0xa1/0x390
    net_rx_action+0x59b/0xe00
    handle_softirqs+0x22b/0x630
    do_softirq+0xb1/0xf0
    __local_bh_enable_ip+0x115/0x150

vrf_ip6_input_dst unconditionally sets skb dst entry, add a call to skb_dst_drop to drop any existing entry.

Cc David Ahern <[email protected]>
Fixes 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses")
---
 drivers/net/vrf.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/vrf.c +2 -0
index b51a2367dbaa..8a320300a617 100644
@@ -1040,6 +1040,8 @@ static void vrf_ip6_input_dst(struct sk_buff *skb, struct net_device *vrf_dev,
 	struct net *net = dev_net(vrf_dev);
 	struct rt6_info *rt6;
 
+	skb_dst_drop(skb);
+
 	rt6 = vrf_ip6_route_lookup(net, vrf_dev, &fl6, ifindex, skb,
 				   RT6_LOOKUP_F_HAS_SADDR | RT6_LOOKUP_F_IFACE);
 	if (unlikely(!rt6))
Signature · 1 line
2.39.5
author maintainer
#109 lore raw

PATCH 105/403 PCI: rockchip-host: Fix "Unexpected Completion" log message

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans Zhang <[email protected]>

[ Upstream commit fcc5f586c4edbcc10de23fb9b8c0972a84e945cd ]

Fix the debug message for the PCIE_CORE_INT_UCR interrupt to clearly indicate "Unexpected Completion" instead of a duplicate "malformed TLP" message.

Fixes e77f847df54c ("PCI: rockchip: Add Rockchip PCIe controller support")
[mani: added fixes tag]
---
 drivers/pci/controller/pcie-rockchip-host.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/pcie-rockchip-host.c +1 -1
index ef8e677ce9d1..281ddde9d8cc 100644
@@ -445,7 +445,7 @@ static irqreturn_t rockchip_pcie_subsys_irq_handler(int irq, void *arg)
 			dev_dbg(dev, "malformed TLP received from the link\n");
 
 		if (sub_reg & PCIE_CORE_INT_UCR)
-			dev_dbg(dev, "malformed TLP received from the link\n");
+			dev_dbg(dev, "Unexpected Completion received from the link\n");
 
 		if (sub_reg & PCIE_CORE_INT_FCE)
 			dev_dbg(dev, "an error was observed in the flow control advertisements from the other side\n");
Signature · 1 line
2.39.5
author maintainer
#110 lore raw

PATCH 106/403 crypto: marvell/cesa - Fix engine load inaccuracy

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herbert Xu <[email protected]>

[ Upstream commit 442134ab30e75b7229c4bfc1ac5641d245cffe27 ]

If an error occurs during queueing the engine load will never be decremented. Fix this by moving the engine load adjustment into the cleanup function.

Fixes bf8f91e71192 ("crypto: marvell - Add load balancing between engines")
---
 drivers/crypto/marvell/cipher.c | 4 +++-
 drivers/crypto/marvell/hash.c   | 5 +++--
 2 files changed, 6 insertions(+), 3 deletions(-)
drivers/crypto/marvell/cipher.c +3 -1
index f92f86c94bff..d48034a9e0da 100644
@@ -73,9 +73,12 @@ mv_cesa_skcipher_dma_cleanup(struct skcipher_request *req)
 static inline void mv_cesa_skcipher_cleanup(struct skcipher_request *req)
 {
 	struct mv_cesa_skcipher_req *creq = skcipher_request_ctx(req);
+	struct mv_cesa_engine *engine = creq->base.engine;
 
 	if (mv_cesa_req_get_type(&creq->base) == CESA_DMA_REQ)
 		mv_cesa_skcipher_dma_cleanup(req);
+
+	atomic_sub(req->cryptlen, &engine->load);
 }
 
 static void mv_cesa_skcipher_std_step(struct skcipher_request *req)
@@ -202,7 +205,6 @@ mv_cesa_skcipher_complete(struct crypto_async_request *req)
 	struct mv_cesa_engine *engine = creq->base.engine;
 	unsigned int ivsize;
 
-	atomic_sub(skreq->cryptlen, &engine->load);
 	ivsize = crypto_skcipher_ivsize(crypto_skcipher_reqtfm(skreq));
 
 	if (mv_cesa_req_get_type(&creq->base) == CESA_DMA_REQ) {
drivers/crypto/marvell/hash.c +3 -2
index de1599bca3b7..01dd597b6a2a 100644
@@ -107,9 +107,12 @@ static inline void mv_cesa_ahash_dma_cleanup(struct ahash_request *req)
 static inline void mv_cesa_ahash_cleanup(struct ahash_request *req)
 {
 	struct mv_cesa_ahash_req *creq = ahash_request_ctx(req);
+	struct mv_cesa_engine *engine = creq->base.engine;
 
 	if (mv_cesa_req_get_type(&creq->base) == CESA_DMA_REQ)
 		mv_cesa_ahash_dma_cleanup(req);
+
+	atomic_sub(req->nbytes, &engine->load);
 }
 
 static void mv_cesa_ahash_last_cleanup(struct ahash_request *req)
@@ -363,8 +366,6 @@ static void mv_cesa_ahash_complete(struct crypto_async_request *req)
 			}
 		}
 	}
-
-	atomic_sub(ahashreq->nbytes, &engine->load);
 }
 
 static void mv_cesa_ahash_prepare(struct crypto_async_request *req,
Signature · 1 line
2.39.5
author maintainer
#111 lore raw

PATCH 107/403 mtd: fix possible integer overflow in erase_xfer()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ivan Stepchenko <[email protected]>

[ Upstream commit 9358bdb9f9f54d94ceafc650deffefd737d19fdd ]

The expression '1 << EraseUnitSize' is evaluated in int, which causes a negative result when shifting by 31 - the upper bound of the valid range [10, 31], enforced by scan_header(). This leads to incorrect extension when storing the result in 'erase->len' (uint64_t), producing a large unexpected value.

Found by Linux Verification Center (linuxtesting.org) with Svace.

Fixes 1da177e4c3f4 ("Linux-2.6.12-rc2")
---
 drivers/mtd/ftl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/ftl.c +1 -1
index 2578f27914ef..ffe89209cf4b 100644
@@ -344,7 +344,7 @@ static int erase_xfer(partition_t *part,
             return -ENOMEM;
 
     erase->addr = xfer->Offset;
-    erase->len = 1 << part->header.EraseUnitSize;
+    erase->len = 1ULL << part->header.EraseUnitSize;
 
     ret = mtd_erase(part->mbd.mtd, erase);
     if (!ret) {
Signature · 1 line
2.39.5
author maintainer
#112 lore raw

PATCH 108/403 clk: davinci: Add NULL check in davinci_lpsc_clk_register()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Henry Martin <[email protected]>

[ Upstream commit 13de464f445d42738fe18c9a28bab056ba3a290a ]

devm_kasprintf() returns NULL when memory allocation fails. Currently, davinci_lpsc_clk_register() does not check for this case, which results in a NULL pointer dereference.

Add NULL check after devm_kasprintf() to prevent this issue and ensuring no resources are left allocated.

Fixes c6ed4d734bc7 ("clk: davinci: New driver for davinci PSC clocks")
---
 drivers/clk/davinci/psc.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/clk/davinci/psc.c +5 -0
index 5b69e24a224f..2e153320fc53 100644
@@ -278,6 +278,11 @@ davinci_lpsc_clk_register(struct device *dev, const char *name,
 
 	lpsc->pm_domain.name = devm_kasprintf(dev, GFP_KERNEL, "%s: %s",
 					      best_dev_name(dev), name);
+	if (!lpsc->pm_domain.name) {
+		clk_hw_unregister(&lpsc->hw);
+		kfree(lpsc);
+		return ERR_PTR(-ENOMEM);
+	}
 	lpsc->pm_domain.attach_dev = davinci_psc_genpd_attach_dev;
 	lpsc->pm_domain.detach_dev = davinci_psc_genpd_detach_dev;
 	lpsc->pm_domain.flags = GENPD_FLAG_PM_CLK;
Signature · 1 line
2.39.5
author maintainer
#113 lore raw

PATCH 109/403 power: supply: max14577: Handle NULL pdata when CONFIG_OF is not set

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Charles Han <[email protected]>

[ Upstream commit 2937f5d2e24eefef8cb126244caec7fe3307f724 ]

When the kernel is not configured CONFIG_OF, the max14577_charger_dt_init function returns NULL. Fix the max14577_charger_probe functionby returning -ENODATA instead of potentially passing a NULL pointer to PTR_ERR.

This fixes the below smatch warning:
max14577_charger_probe() warn: passing zero to 'PTR_ERR'

Fixes e30110e9c96f ("charger: max14577: Configure battery-dependent settings from DTS and sysfs")
---
 drivers/power/supply/max14577_charger.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/power/supply/max14577_charger.c +2 -2
index 8a59feac6468..90b97736ac2a 100644
@@ -501,7 +501,7 @@ static struct max14577_charger_platform_data *max14577_charger_dt_init(
 static struct max14577_charger_platform_data *max14577_charger_dt_init(
 		struct platform_device *pdev)
 {
-	return NULL;
+	return ERR_PTR(-ENODATA);
 }
 #endif /* CONFIG_OF */
 
@@ -572,7 +572,7 @@ static int max14577_charger_probe(struct platform_device *pdev)
 	chg->max14577 = max14577;
 
 	chg->pdata = max14577_charger_dt_init(pdev);
-	if (IS_ERR_OR_NULL(chg->pdata))
+	if (IS_ERR(chg->pdata))
 		return PTR_ERR(chg->pdata);
 
 	ret = max14577_charger_reg_init(chg);
Signature · 1 line
2.39.5
author maintainer
#114 lore raw

PATCH 110/403 pinctrl: sunxi: Fix memory leak on krealloc failure

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Yuan Chen <[email protected]>

[ Upstream commit e3507c56cbb208d4f160942748c527ef6a528ba1 ]

In sunxi_pctrl_dt_node_to_map(), when krealloc() fails to resize the pinctrl_map array, the function returns -ENOMEM directly without freeing the previously allocated *map buffer. This results in a memory leak of the original kmalloc_array allocation.

Fixes e11dee2e98f8 ("pinctrl: sunxi: Deal with configless pins")
---
 drivers/pinctrl/sunxi/pinctrl-sunxi.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/pinctrl/sunxi/pinctrl-sunxi.c +8 -3
index 8c41f8b818b2..83775dd12cfa 100644
@@ -327,6 +327,7 @@ static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
 	const char *function, *pin_prop;
 	const char *group;
 	int ret, npins, nmaps, configlen = 0, i = 0;
+	struct pinctrl_map *new_map;
 
 	*map = NULL;
 	*num_maps = 0;
@@ -401,9 +402,13 @@ static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
 	 * We know have the number of maps we need, we can resize our
 	 * map array
 	 */
-	*map = krealloc(*map, i * sizeof(struct pinctrl_map), GFP_KERNEL);
-	if (!*map)
-		return -ENOMEM;
+	new_map = krealloc(*map, i * sizeof(struct pinctrl_map), GFP_KERNEL);
+	if (!new_map) {
+		ret = -ENOMEM;
+		goto err_free_map;
+	}
+
+	*map = new_map;
 
 	return 0;
 
Signature · 1 line
2.39.5
author maintainer
#115 lore raw

PATCH 111/403 crypto: ccp - Fix crash when rebind ccp device for ccp.ko

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mengbiao Xiong <[email protected]>

[ Upstream commit 181698af38d3f93381229ad89c09b5bd0496661a ]

When CONFIG_CRYPTO_DEV_CCP_DEBUGFS is enabled, rebinding the ccp device causes the following crash:

$ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/unbind
$ echo '0000:0a:00.2' > /sys/bus/pci/drivers/ccp/bind
[  204.976930] BUG: kernel NULL pointer dereference, address: 0000000000000098
[  204.978026] #PF: supervisor write access in kernel mode
[  204.979126] #PF: error_code(0x0002) - not-present page
[  204.980226] PGD 0 P4D 0
[  204.981317] Oops: Oops: 0002 [#1] SMP NOPTI
...
[  204.997852] Call Trace:
[  204.999074]  <TASK>
[  205.000297]  start_creating+0x9f/0x1c0
[  205.001533]  debugfs_create_dir+0x1f/0x170
[  205.002769]  ? srso_return_thunk+0x5/0x5f
[  205.004000]  ccp5_debugfs_setup+0x87/0x170 [ccp]
[  205.005241]  ccp5_init+0x8b2/0x960 [ccp]
[  205.006469]  ccp_dev_init+0xd4/0x150 [ccp]
[  205.007709]  sp_init+0x5f/0x80 [ccp]
[  205.008942]  sp_pci_probe+0x283/0x2e0 [ccp]
[  205.010165]  ? srso_return_thunk+0x5/0x5f
[  205.011376]  local_pci_probe+0x4f/0xb0
[  205.012584]  pci_device_probe+0xdb/0x230
[  205.013810]  really_probe+0xed/0x380
[  205.015024]  __driver_probe_device+0x7e/0x160
[  205.016240]  device_driver_attach+0x2f/0x60
[  205.017457]  bind_store+0x7c/0xb0
[  205.018663]  drv_attr_store+0x28/0x40
[  205.019868]  sysfs_kf_write+0x5f/0x70
[  205.021065]  kernfs_fop_write_iter+0x145/0x1d0
[  205.022267]  vfs_write+0x308/0x440
[  205.023453]  ksys_write+0x6d/0xe0
[  205.024616]  __x64_sys_write+0x1e/0x30
[  205.025778]  x64_sys_call+0x16ba/0x2150
[  205.026942]  do_syscall_64+0x56/0x1e0
[  205.028108]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[  205.029276] RIP: 0033:0x7fbc36f10104
[  205.030420] Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 e1 08 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5

This patch sets ccp_debugfs_dir to NULL after destroying it in ccp5_debugfs_destroy, allowing the directory dentry to be recreated when rebinding the ccp device.

Tested on AMD Ryzen 7 1700X.

Fixes 3cdbe346ed3f ("crypto: ccp - Add debugfs entries for CCP information")
---
 drivers/crypto/ccp/ccp-debugfs.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/crypto/ccp/ccp-debugfs.c +3 -0
index a1055554b47a..dc26bc22c91d 100644
@@ -319,5 +319,8 @@ void ccp5_debugfs_setup(struct ccp_device *ccp)
 
 void ccp5_debugfs_destroy(void)
 {
+	mutex_lock(&ccp_debugfs_lock);
 	debugfs_remove_recursive(ccp_debugfs_dir);
+	ccp_debugfs_dir = NULL;
+	mutex_unlock(&ccp_debugfs_lock);
 }
Signature · 1 line
2.39.5
author maintainer
#116 lore raw

PATCH 112/403 perf tests bp_account: Fix leaked file descriptor

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leo Yan <[email protected]>

[ Upstream commit 4a6cdecaa1497f1fbbd1d5307a225b6ca5a62a90 ]

Since the commit e9846f5ead26 ("perf test: In forked mode add check that fds aren't leaked"), the test "Breakpoint accounting" reports the error:

  # perf test -vvv "Breakpoint accounting"
  20: Breakpoint accounting:
  --- start ---
  test child forked, pid 373
  failed opening event 0
  failed opening event 0
  watchpoints count 4, breakpoints count 6, has_ioctl 1, share 0
  wp 0 created
  wp 1 created
  wp 2 created
  wp 3 created
  wp 0 modified to bp
  wp max created
  ---- end(0) ----
  Leak of file descriptor 7 that opened: 'anon_inode:[perf_event]'

A watchpoint's file descriptor was not properly released. This patch fixes the leak.

---
 tools/perf/tests/bp_account.c | 1 +
 1 file changed, 1 insertion(+)
tools/perf/tests/bp_account.c +1 -0
index 55a9de311d7b..e1ff0faa0149 100644
@@ -93,6 +93,7 @@ static int bp_accounting(int wp_cnt, int share)
 		fd_wp = wp_event((void *)&the_var, &attr_new);
 		TEST_ASSERT_VAL("failed to create max wp\n", fd_wp != -1);
 		pr_debug("wp max created\n");
+		close(fd_wp);
 	}
 
 	for (i = 0; i < wp_cnt; i++)
Signature · 1 line
2.39.5
author maintainer
#117 lore raw

PATCH 113/403 clk: sunxi-ng: v3s: Fix de clock definition

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Kocialkowski <[email protected]>

[ Upstream commit e8ab346f9907a1a3aa2f0e5decf849925c06ae2e ]

The de clock is marked with CLK_SET_RATE_PARENT, which is really not necessary (as confirmed from experimentation) and significantly restricts flexibility for other clocks using the same parent.

In addition the source selection (parent) field is marked as using 2 bits, when it the documentation reports that it uses 3.

Fix both issues in the de clock definition.

Fixes d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
---
 drivers/clk/sunxi-ng/ccu-sun8i-v3s.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/clk/sunxi-ng/ccu-sun8i-v3s.c +1 -2
index 0e36ca3bf3d5..4fddb489cdce 100644
@@ -334,8 +334,7 @@ static SUNXI_CCU_GATE(dram_ohci_clk,	"dram-ohci",	"dram",
 
 static const char * const de_parents[] = { "pll-video", "pll-periph0" };
 static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents,
-				 0x104, 0, 4, 24, 2, BIT(31),
-				 CLK_SET_RATE_PARENT);
+				 0x104, 0, 4, 24, 3, BIT(31), 0);
 
 static const char * const tcon_parents[] = { "pll-video" };
 static SUNXI_CCU_M_WITH_MUX_GATE(tcon_clk, "tcon", tcon_parents,
Signature · 1 line
2.39.5
author maintainer
#118 lore raw

PATCH 114/403 scsi: ibmvscsi_tgt: Fix dma_unmap_sg() nents value

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

[ Upstream commit 023a293b9cd0bb86a9b50cd7688a3d9d266826db ]

The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned.

Fixes 88a678bbc34c ("ibmvscsis: Initial commit of IBM VSCSI Tgt Driver")
---
 drivers/scsi/ibmvscsi_tgt/libsrp.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/scsi/ibmvscsi_tgt/libsrp.c +4 -2
index 8a0e28aec928..0ecad398ed3d 100644
@@ -184,7 +184,8 @@ static int srp_direct_data(struct ibmvscsis_cmd *cmd, struct srp_direct_buf *md,
 	err = rdma_io(cmd, sg, nsg, md, 1, dir, len);
 
 	if (dma_map)
-		dma_unmap_sg(iue->target->dev, sg, nsg, DMA_BIDIRECTIONAL);
+		dma_unmap_sg(iue->target->dev, sg, cmd->se_cmd.t_data_nents,
+			     DMA_BIDIRECTIONAL);
 
 	return err;
 }
@@ -256,7 +257,8 @@ static int srp_indirect_data(struct ibmvscsis_cmd *cmd, struct srp_cmd *srp_cmd,
 	err = rdma_io(cmd, sg, nsg, md, nmd, dir, len);
 
 	if (dma_map)
-		dma_unmap_sg(iue->target->dev, sg, nsg, DMA_BIDIRECTIONAL);
+		dma_unmap_sg(iue->target->dev, sg, cmd->se_cmd.t_data_nents,
+			     DMA_BIDIRECTIONAL);
 
 free_mem:
 	if (token && dma_map) {
Signature · 1 line
2.39.5
author maintainer
#119 lore raw

PATCH 115/403 scsi: mvsas: Fix dma_unmap_sg() nents value

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

[ Upstream commit 0141618727bc929fe868153d21797f10ce5bef3f ]

The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned.

Fixes b5762948263d ("[SCSI] mvsas: Add Marvell 6440 SAS/SATA driver")
---
 drivers/scsi/mvsas/mv_sas.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/scsi/mvsas/mv_sas.c +2 -2
index 3e0b8ebe257f..68caeaf9e636 100644
@@ -831,7 +831,7 @@ static int mvs_task_prep(struct sas_task *task, struct mvs_info *mvi, int is_tmf
 	dev_printk(KERN_ERR, mvi->dev, "mvsas prep failed[%d]!\n", rc);
 	if (!sas_protocol_ata(task->task_proto))
 		if (n_elem)
-			dma_unmap_sg(mvi->dev, task->scatter, n_elem,
+			dma_unmap_sg(mvi->dev, task->scatter, task->num_scatter,
 				     task->data_dir);
 prep_out:
 	return rc;
@@ -882,7 +882,7 @@ static void mvs_slot_task_free(struct mvs_info *mvi, struct sas_task *task,
 	if (!sas_protocol_ata(task->task_proto))
 		if (slot->n_elem)
 			dma_unmap_sg(mvi->dev, task->scatter,
-				     slot->n_elem, task->data_dir);
+				     task->num_scatter, task->data_dir);
 
 	switch (task->task_proto) {
 	case SAS_PROTOCOL_SMP:
Signature · 1 line
2.39.5
author maintainer
#120 lore raw

PATCH 116/403 scsi: isci: Fix dma_unmap_sg() nents value

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

[ Upstream commit 063bec4444d54e5f35d11949c5c90eaa1ff84c11 ]

The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned.

---
 drivers/scsi/isci/request.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/scsi/isci/request.c +1 -1
index 591aebb40a0f..2deeddad10e1 100644
@@ -2914,7 +2914,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost,
 					 task->total_xfer_len, task->data_dir);
 		else  /* unmap the sgl dma addresses */
 			dma_unmap_sg(&ihost->pdev->dev, task->scatter,
-				     request->num_sg_entries, task->data_dir);
+				     task->num_scatter, task->data_dir);
 		break;
 	case SAS_PROTOCOL_SMP: {
 		struct scatterlist *sg = &task->smp_task.smp_req;
Signature · 1 line
2.39.5
author maintainer
#121 lore raw

PATCH 117/403 watchdog: ziirave_wdt: check record length in ziirave_firm_verify()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

[ Upstream commit 8b61d8ca751bc15875b50e0ff6ac3ba0cf95a529 ]

The "rec->len" value comes from the firmware. We generally do trust firmware, but it's always better to double check. If the length value is too large it would lead to memory corruption when we set "data[i] = ret;"

---
 drivers/watchdog/ziirave_wdt.c | 3 +++
 1 file changed, 3 insertions(+)
drivers/watchdog/ziirave_wdt.c +3 -0
index 4a363a8b2d20..84c98c4c510c 100644
@@ -306,6 +306,9 @@ static int ziirave_firm_verify(struct watchdog_device *wdd,
 		const u16 len = be16_to_cpu(rec->len);
 		const u32 addr = be32_to_cpu(rec->addr);
 
+		if (len > sizeof(data))
+			return -EINVAL;
+
 		if (ziirave_firm_addr_readonly(addr))
 			continue;
 
Signature · 1 line
2.39.5
author maintainer
#122 lore raw

PATCH 118/403 hwrng: mtk - handle devm_pm_runtime_enable errors

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ovidiu Panait <[email protected]>

[ Upstream commit 522a242a18adc5c63a24836715dbeec4dc3faee1 ]

Although unlikely, devm_pm_runtime_enable() call might fail, so handle the return value.

Fixes 78cb66caa6ab ("hwrng: mtk - Use devm_pm_runtime_enable")
---
 drivers/char/hw_random/mtk-rng.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/char/hw_random/mtk-rng.c +3 -1
index 6c21eb749b51..f5325fe4f1de 100644
@@ -149,7 +149,9 @@ static int mtk_rng_probe(struct platform_device *pdev)
 	dev_set_drvdata(&pdev->dev, priv);
 	pm_runtime_set_autosuspend_delay(&pdev->dev, RNG_AUTOSUSPEND_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
-	devm_pm_runtime_enable(&pdev->dev);
+	ret = devm_pm_runtime_enable(&pdev->dev);
+	if (ret)
+		return ret;
 
 	dev_info(&pdev->dev, "registered RNG driver\n");
 
Signature · 1 line
2.39.5
author maintainer
#123 lore raw

PATCH 119/403 crypto: img-hash - Fix dma_unmap_sg() nents value

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

[ Upstream commit 34b283636181ce02c52633551f594fec9876bec7 ]

The dma_unmap_sg() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned.

Fixes d358f1abbf71 ("crypto: img-hash - Add Imagination Technologies hw hash accelerator")
---
 drivers/crypto/img-hash.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/crypto/img-hash.c +1 -1
index 17cc44f14e5c..b5fd15e0c050 100644
@@ -434,7 +434,7 @@ static int img_hash_write_via_dma_stop(struct img_hash_dev *hdev)
 	struct img_hash_request_ctx *ctx = ahash_request_ctx(hdev->req);
 
 	if (ctx->flags & DRIVER_FLAGS_SG)
-		dma_unmap_sg(hdev->dev, ctx->sg, ctx->dma_ct, DMA_TO_DEVICE);
+		dma_unmap_sg(hdev->dev, ctx->sg, 1, DMA_TO_DEVICE);
 
 	return 0;
 }
Signature · 1 line
2.39.5
author maintainer
#124 lore raw

PATCH 120/403 soundwire: stream: restore params when prepare ports fail

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bard Liao <[email protected]>

[ Upstream commit dba7d9dbfdc4389361ff3a910e767d3cfca22587 ]

The bus->params should be restored if the stream is failed to prepare. The issue exists since beginning. The Fixes tag just indicates the first commit that the commit can be applied to.

Fixes 17ed5bef49f4 ("soundwire: add missing newlines in dynamic debug logs")
---
 drivers/soundwire/stream.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/soundwire/stream.c +1 -1
index 3b3f909407c3..6e4c7bf9eb0d 100644
@@ -1532,7 +1532,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
 		if (ret < 0) {
 			dev_err(bus->dev, "Prepare port(s) failed ret = %d\n",
 				ret);
-			return ret;
+			goto restore_params;
 		}
 	}
 
Signature · 1 line
2.39.5
author maintainer
#125 lore raw

PATCH 121/403 fs/orangefs: Allow 2 more characters in do_c_string()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <[email protected]>

[ Upstream commit 2138e89cb066b40386b1d9ddd61253347d356474 ]

The do_k_string() and do_c_string() functions do essentially the same thing which is they add a string and a comma onto the end of an existing string. At the end, the caller will overwrite the last comma with a newline. Later, in orangefs_kernel_debug_init(), we add a newline to the string.

The change to do_k_string() is just cosmetic. I moved the "- 1" to the other side of the comparison and made it "+ 1". This has no effect on runtime, I just wanted the functions to match each other and the rest of the file.

However in do_c_string(), I removed the "- 2" which allows us to print two extra characters. I noticed this issue while reviewing the code and I doubt affects anything in real life. My guess is that this was double counting the comma and the newline. The "+ 1" accounts for the newline, and the caller will delete the final comma which ensures there is enough space for the newline.

Removing the "- 2" lets us print 2 more characters, but mainly it makes the code more consistent and understandable for reviewers.

Fixes 44f4641073f1 ("orangefs: clean up debugfs globals")
---
 fs/orangefs/orangefs-debugfs.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
fs/orangefs/orangefs-debugfs.c +3 -3
index fa41db088488..b57140ebfad0 100644
@@ -728,8 +728,8 @@ static void do_k_string(void *k_mask, int index)
 
 	if (*mask & s_kmod_keyword_mask_map[index].mask_val) {
 		if ((strlen(kernel_debug_string) +
-		     strlen(s_kmod_keyword_mask_map[index].keyword))
-			< ORANGEFS_MAX_DEBUG_STRING_LEN - 1) {
+		     strlen(s_kmod_keyword_mask_map[index].keyword) + 1)
+			< ORANGEFS_MAX_DEBUG_STRING_LEN) {
 				strcat(kernel_debug_string,
 				       s_kmod_keyword_mask_map[index].keyword);
 				strcat(kernel_debug_string, ",");
@@ -756,7 +756,7 @@ static void do_c_string(void *c_mask, int index)
 	    (mask->mask2 & cdm_array[index].mask2)) {
 		if ((strlen(client_debug_string) +
 		     strlen(cdm_array[index].keyword) + 1)
-			< ORANGEFS_MAX_DEBUG_STRING_LEN - 2) {
+			< ORANGEFS_MAX_DEBUG_STRING_LEN) {
 				strcat(client_debug_string,
 				       cdm_array[index].keyword);
 				strcat(client_debug_string, ",");
Signature · 1 line
2.39.5
author maintainer
#126 lore raw

PATCH 122/403 dmaengine: mv_xor: Fix missing check after DMA map and missing unmap

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

[ Upstream commit 60095aca6b471b7b7a79c80b7395f7e4e414b479 ]

The DMA map functions can fail and should be tested for errors.

In case of error, unmap the already mapped regions.

Fixes 22843545b200 ("dma: mv_xor: Add support for DMA_INTERRUPT")
---
 drivers/dma/mv_xor.c | 21 +++++++++++++++++++--
 1 file changed, 19 insertions(+), 2 deletions(-)
drivers/dma/mv_xor.c +19 -2
index e96032096042..827a1a9907b6 100644
@@ -1061,8 +1061,16 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 	 */
 	mv_chan->dummy_src_addr = dma_map_single(dma_dev->dev,
 		mv_chan->dummy_src, MV_XOR_MIN_BYTE_COUNT, DMA_FROM_DEVICE);
+	if (dma_mapping_error(dma_dev->dev, mv_chan->dummy_src_addr))
+		return ERR_PTR(-ENOMEM);
+
 	mv_chan->dummy_dst_addr = dma_map_single(dma_dev->dev,
 		mv_chan->dummy_dst, MV_XOR_MIN_BYTE_COUNT, DMA_TO_DEVICE);
+	if (dma_mapping_error(dma_dev->dev, mv_chan->dummy_dst_addr)) {
+		ret = -ENOMEM;
+		goto err_unmap_src;
+	}
+
 
 	/* allocate coherent memory for hardware descriptors
 	 * note: writecombine gives slightly better performance, but
@@ -1071,8 +1079,10 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 	mv_chan->dma_desc_pool_virt =
 	  dma_alloc_wc(&pdev->dev, MV_XOR_POOL_SIZE, &mv_chan->dma_desc_pool,
 		       GFP_KERNEL);
-	if (!mv_chan->dma_desc_pool_virt)
-		return ERR_PTR(-ENOMEM);
+	if (!mv_chan->dma_desc_pool_virt) {
+		ret = -ENOMEM;
+		goto err_unmap_dst;
+	}
 
 	/* discover transaction capabilites from the platform data */
 	dma_dev->cap_mask = cap_mask;
@@ -1156,6 +1166,13 @@ mv_xor_channel_add(struct mv_xor_device *xordev,
 err_free_dma:
 	dma_free_coherent(&pdev->dev, MV_XOR_POOL_SIZE,
 			  mv_chan->dma_desc_pool_virt, mv_chan->dma_desc_pool);
+err_unmap_dst:
+	dma_unmap_single(dma_dev->dev, mv_chan->dummy_dst_addr,
+			 MV_XOR_MIN_BYTE_COUNT, DMA_TO_DEVICE);
+err_unmap_src:
+	dma_unmap_single(dma_dev->dev, mv_chan->dummy_src_addr,
+			 MV_XOR_MIN_BYTE_COUNT, DMA_FROM_DEVICE);
+
 	return ERR_PTR(ret);
 }
 
Signature · 1 line
2.39.5
author maintainer
#127 lore raw

PATCH 123/403 dmaengine: nbpfaxi: Add missing check after DMA map

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

[ Upstream commit c6ee78fc8f3e653bec427cfd06fec7877ee782bd ]

The DMA map functions can fail and should be tested for errors. If the mapping fails, unmap and return an error.

Fixes b45b262cefd5 ("dmaengine: add a driver for AMBA AXI NBPF DMAC IP cores")
---
 drivers/dma/nbpfaxi.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
drivers/dma/nbpfaxi.c +13 -0
index b9a36a6a3852..0a8b04798b98 100644
@@ -705,6 +705,9 @@ static int nbpf_desc_page_alloc(struct nbpf_channel *chan)
 		list_add_tail(&ldesc->node, &lhead);
 		ldesc->hwdesc_dma_addr = dma_map_single(dchan->device->dev,
 					hwdesc, sizeof(*hwdesc), DMA_TO_DEVICE);
+		if (dma_mapping_error(dchan->device->dev,
+				      ldesc->hwdesc_dma_addr))
+			goto unmap_error;
 
 		dev_dbg(dev, "%s(): mapped 0x%p to %pad\n", __func__,
 			hwdesc, &ldesc->hwdesc_dma_addr);
@@ -731,6 +734,16 @@ static int nbpf_desc_page_alloc(struct nbpf_channel *chan)
 	spin_unlock_irq(&chan->lock);
 
 	return ARRAY_SIZE(dpage->desc);
+
+unmap_error:
+	while (i--) {
+		ldesc--; hwdesc--;
+
+		dma_unmap_single(dchan->device->dev, ldesc->hwdesc_dma_addr,
+				 sizeof(hwdesc), DMA_TO_DEVICE);
+	}
+
+	return -ENOMEM;
 }
 
 static void nbpf_desc_put(struct nbpf_desc *desc)
Signature · 1 line
2.39.5
author maintainer
#128 lore raw

PATCH 124/403 crypto: qat - fix seq_file position update in adf_ring_next()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Giovanni Cabiddu <[email protected]>

[ Upstream commit 6908c5f4f066a0412c3d9a6f543a09fa7d87824b ]

The adf_ring_next() function in the QAT debug transport interface fails to correctly update the position index when reaching the end of the ring elements. This triggers the following kernel warning when reading ring files, such as /sys/kernel/debug/qat_c6xx_<D:B:D:F>/transport/bank_00/ring_00:

   [27725.022965] seq_file: buggy .next function adf_ring_next [intel_qat] did not update position index

Ensure that the *pos index is incremented before returning NULL when after the last element in the ring is found, satisfying the seq_file API requirements and preventing the warning.

Fixes a672a9dc872e ("crypto: qat - Intel(R) QAT transport code")
---
 drivers/crypto/qat/qat_common/adf_transport_debug.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/crypto/qat/qat_common/adf_transport_debug.c +3 -1
index e794e9d97b2c..9303d6318207 100644
@@ -75,8 +75,10 @@ static void *adf_ring_next(struct seq_file *sfile, void *v, loff_t *pos)
 	struct adf_etr_ring_data *ring = sfile->private;
 
 	if (*pos >= (ADF_SIZE_TO_RING_SIZE_IN_BYTES(ring->ring_size) /
-		     ADF_MSG_SIZE_TO_BYTES(ring->msg_size)))
+		     ADF_MSG_SIZE_TO_BYTES(ring->msg_size))) {
+		(*pos)++;
 		return NULL;
+	}
 
 	return ring->base_addr +
 		(ADF_MSG_SIZE_TO_BYTES(ring->msg_size) * (*pos)++);
Signature · 1 line
2.39.5
author maintainer
#129 lore raw

PATCH 125/403 fbdev: imxfb: Check fb_add_videomode to prevent null-ptr-deref

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chenyuan Yang <[email protected]>

[ Upstream commit da11e6a30e0bb8e911288bdc443b3dc8f6a7cac7 ]

fb_add_videomode() can fail with -ENOMEM when its internal kmalloc() cannot allocate a struct fb_modelist. If that happens, the modelist stays empty but the driver continues to register. Add a check for its return value to prevent poteintial null-ptr-deref, which is similar to the commit 17186f1f90d3 ("fbdev:
Fix do_register_framebuffer to prevent null-ptr-deref in fb_videomode_to_var").

Fixes 1b6c79361ba5 ("video: imxfb: Add DT support")
---
 drivers/video/fbdev/imxfb.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/video/fbdev/imxfb.c +7 -2
index dbc8808b093a..8dac15bf2b0c 100644
@@ -992,8 +992,13 @@ static int imxfb_probe(struct platform_device *pdev)
 
 
 	INIT_LIST_HEAD(&info->modelist);
-	for (i = 0; i < fbi->num_modes; i++)
-		fb_add_videomode(&fbi->mode[i].mode, &info->modelist);
+	for (i = 0; i < fbi->num_modes; i++) {
+		ret = fb_add_videomode(&fbi->mode[i].mode, &info->modelist);
+		if (ret) {
+			dev_err(&pdev->dev, "Failed to add videomode\n");
+			goto failed_cmap;
+		}
+	}
 
 	/*
 	 * This makes sure that our colour bitfield
Signature · 1 line
2.39.5
author maintainer
#130 lore raw

PATCH 126/403 jfs: fix metapage reference count leak in dbAllocCtl

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Zheng Yu <[email protected]>

[ Upstream commit 856db37592021e9155384094e331e2d4589f28b1 ]

In dbAllocCtl(), read_metapage() increases the reference count of the metapage. However, when dp->tree.budmin < 0, the function returns -EIO without calling release_metapage() to decrease the reference count, leading to a memory leak.

Add release_metapage(mp) before the error return to properly manage the metapage reference count and prevent the leak.

Fixes a5f5e4698f8abbb25fe4959814093fb5bfa1aa9d ("jfs: fix shift-out-of-bounds in dbSplit")
---
 fs/jfs/jfs_dmap.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
fs/jfs/jfs_dmap.c +3 -1
index 8cffb5dd98cf..15f885d2fa3d 100644
@@ -1875,8 +1875,10 @@ dbAllocCtl(struct bmap * bmp, s64 nblocks, int l2nb, s64 blkno, s64 * results)
 			return -EIO;
 		dp = (struct dmap *) mp->data;
 
-		if (dp->tree.budmin < 0)
+		if (dp->tree.budmin < 0) {
+			release_metapage(mp);
 			return -EIO;
+		}
 
 		/* try to allocate the blocks.
 		 */
Signature · 1 line
2.39.5
author maintainer
#131 lore raw

PATCH 127/403 mtd: rawnand: atmel: Fix dma_mapping_error() address

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thomas Fourier <[email protected]>

[ Upstream commit e1e6b933c56b1e9fda93caa0b8bae39f3f421e5c ]

It seems like what was intended is to test if the dma_map of the previous line failed but the wrong dma address was passed.

Fixes f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")

Rule: add

---
 drivers/mtd/nand/raw/atmel/nand-controller.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/mtd/nand/raw/atmel/nand-controller.c +1 -1
index 997910bec727..a54ad340f1e2 100644
@@ -370,7 +370,7 @@ static int atmel_nand_dma_transfer(struct atmel_nand_controller *nc,
 	dma_cookie_t cookie;
 
 	buf_dma = dma_map_single(nc->dev, buf, len, dir);
-	if (dma_mapping_error(nc->dev, dev_dma)) {
+	if (dma_mapping_error(nc->dev, buf_dma)) {
 		dev_err(nc->dev,
 			"Failed to prepare a buffer for DMA access\n");
 		goto err;
Signature · 1 line
2.39.5
author maintainer
#132 lore raw

PATCH 128/403 mtd: rawnand: atmel: set pmecc data setup time

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Balamanikandan Gunasundar <[email protected]>

[ Upstream commit f552a7c7e0a14215cb8a6fd89e60fa3932a74786 ]

Setup the pmecc data setup time as 3 clock cycles for 133MHz as recommended by the datasheet.

---
 drivers/mtd/nand/raw/atmel/pmecc.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/mtd/nand/raw/atmel/pmecc.c +6 -0
index d1ed5878b3b1..28ed65dd3d43 100644
@@ -143,6 +143,7 @@ struct atmel_pmecc_caps {
 	int nstrengths;
 	int el_offset;
 	bool correct_erased_chunks;
+	bool clk_ctrl;
 };
 
 struct atmel_pmecc {
@@ -846,6 +847,10 @@ static struct atmel_pmecc *atmel_pmecc_create(struct platform_device *pdev,
 	if (IS_ERR(pmecc->regs.errloc))
 		return ERR_CAST(pmecc->regs.errloc);
 
+	/* pmecc data setup time */
+	if (caps->clk_ctrl)
+		writel(PMECC_CLK_133MHZ, pmecc->regs.base + ATMEL_PMECC_CLK);
+
 	/* Disable all interrupts before registering the PMECC handler. */
 	writel(0xffffffff, pmecc->regs.base + ATMEL_PMECC_IDR);
 	atmel_pmecc_reset(pmecc);
@@ -899,6 +904,7 @@ static struct atmel_pmecc_caps at91sam9g45_caps = {
 	.strengths = atmel_pmecc_strengths,
 	.nstrengths = 5,
 	.el_offset = 0x8c,
+	.clk_ctrl = true,
 };
 
 static struct atmel_pmecc_caps sama5d4_caps = {
Signature · 1 line
2.39.5
author maintainer
#133 lore raw

PATCH 129/403 bpf: Check flow_dissector ctx accesses are aligned

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paul Chaignon <[email protected]>

[ Upstream commit ead3d7b2b6afa5ee7958620c4329982a7d9c2b78 ]

flow_dissector_is_valid_access doesn't check that the context access is aligned. As a consequence, an unaligned access within one of the exposed field is considered valid and later rejected by flow_dissector_convert_ctx_access when we try to convert it.

The later rejection is problematic because it's reported as a verifier bug with a kernel warning and doesn't point to the right instruction in verifier logs.

---
 net/core/filter.c | 3 +++
 1 file changed, 3 insertions(+)
net/core/filter.c +3 -0
index e6ec6f013ec0..fd18497977bd 100644
@@ -7282,6 +7282,9 @@ static bool flow_dissector_is_valid_access(int off, int size,
 	if (off < 0 || off >= sizeof(struct __sk_buff))
 		return false;
 
+	if (off % size != 0)
+		return false;
+
 	if (type == BPF_WRITE)
 		return false;
 
Signature · 1 line
2.39.5
author maintainer
#134 lore raw

PATCH 130/403 module: Restore the moduleparam prefix length check

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Petr Pavlu <[email protected]>

[ Upstream commit bdc877ba6b7ff1b6d2ebeff11e63da4a50a54854 ]

The moduleparam code allows modules to provide their own definition of MODULE_PARAM_PREFIX, instead of using the default KBUILD_MODNAME ".".

Commit 730b69d22525 ("module: check kernel param length at compile time, not runtime") added a check to ensure the prefix doesn't exceed MODULE_NAME_LEN, as this is what param_sysfs_builtin() expects.

Later, commit 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.") removed this check, but there is no indication this was intentional.

Since the check is still useful for param_sysfs_builtin() to function properly, reintroduce it in __module_param_call(), but in a modernized form using static_assert().

While here, clean up the __module_param_call() comments. In particular, remove the comment "Default value instead of permissions?", which comes from commit 9774a1f54f17 ("[PATCH] Compile-time check re world-writeable module params"). This comment was related to the test variable __param_perm_check_##name, which was removed in the previously mentioned commit 58f86cc89c33.

Fixes 58f86cc89c33 ("VERIFY_OCTAL_PERMISSIONS: stricter checking for sysfs perms.")
---
 include/linux/moduleparam.h | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)
include/linux/moduleparam.h +2 -3
index 4d5a851cafe8..6e9062caa7df 100644
@@ -214,10 +214,9 @@ struct kparam_array
 #define __moduleparam_const const
 #endif
 
-/* This is the fundamental function for registering boot/module
-   parameters. */
+/* This is the fundamental function for registering boot/module parameters. */
 #define __module_param_call(prefix, name, ops, arg, perm, level, flags)	\
-	/* Default value instead of permissions? */			\
+	static_assert(sizeof(""prefix) - 1 <= MAX_PARAM_PREFIX_LEN);	\
 	static const char __param_str_##name[] = prefix #name;		\
 	static struct kernel_param __moduleparam_const __param_##name	\
 	__used								\
Signature · 1 line
2.39.5
author maintainer
#135 lore raw

PATCH 131/403 rtc: ds1307: fix incorrect maximum clock rate handling

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Masney <[email protected]>

[ Upstream commit cf6eb547a24af7ad7bbd2abe9c5327f956bbeae8 ]

When ds3231_clk_sqw_round_rate() is called with a requested rate higher than the highest supported rate, it currently returns 0, which disables the clock. According to the clk API, round_rate() should instead return the highest supported rate. Update the function to return the maximum supported rate in this case.

Fixes 6c6ff145b3346 ("rtc: ds1307: add clock provider support for DS3231")
---
 drivers/rtc/rtc-ds1307.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-ds1307.c +1 -1
index 40532a36ae67..b371d1e48942 100644
@@ -1381,7 +1381,7 @@ static long ds3231_clk_sqw_round_rate(struct clk_hw *hw, unsigned long rate,
 			return ds3231_clk_sqw_rates[i];
 	}
 
-	return 0;
+	return ds3231_clk_sqw_rates[ARRAY_SIZE(ds3231_clk_sqw_rates) - 1];
 }
 
 static int ds3231_clk_sqw_set_rate(struct clk_hw *hw, unsigned long rate,
Signature · 1 line
2.39.5
author maintainer
#136 lore raw

PATCH 132/403 rtc: hym8563: fix incorrect maximum clock rate handling

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Masney <[email protected]>

[ Upstream commit d0a518eb0a692a2ab8357e844970660c5ea37720 ]

When hym8563_clkout_round_rate() is called with a requested rate higher than the highest supported rate, it currently returns 0, which disables the clock. According to the clk API, round_rate() should instead return the highest supported rate. Update the function to return the maximum supported rate in this case.

---
 drivers/rtc/rtc-hym8563.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-hym8563.c +1 -1
index fb6d7967ec00..bd625ab70617 100644
@@ -316,7 +316,7 @@ static long hym8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
 		if (clkout_rates[i] <= rate)
 			return clkout_rates[i];
 
-	return 0;
+	return clkout_rates[0];
 }
 
 static int hym8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
Signature · 1 line
2.39.5
author maintainer
#137 lore raw

PATCH 133/403 rtc: pcf8563: fix incorrect maximum clock rate handling

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Brian Masney <[email protected]>

[ Upstream commit 906726a5efeefe0ef0103ccff5312a09080c04ae ]

When pcf8563_clkout_round_rate() is called with a requested rate higher than the highest supported rate, it currently returns 0, which disables the clock. According to the clk API, round_rate() should instead return the highest supported rate. Update the function to return the maximum supported rate in this case.

Fixes a39a6405d5f94 ("rtc: pcf8563: add CLKOUT to common clock framework")
---
 drivers/rtc/rtc-pcf8563.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-pcf8563.c +1 -1
index 24baa4767b11..9e4fdfe9d86a 100644
@@ -421,7 +421,7 @@ static long pcf8563_clkout_round_rate(struct clk_hw *hw, unsigned long rate,
 		if (clkout_rates[i] <= rate)
 			return clkout_rates[i];
 
-	return 0;
+	return clkout_rates[0];
 }
 
 static int pcf8563_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
Signature · 1 line
2.39.5
author maintainer
#138 lore raw

PATCH 134/403 f2fs: fix to avoid UAF in f2fs_sync_inode_meta()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chao Yu <[email protected]>

[ Upstream commit 7c30d79930132466f5be7d0b57add14d1a016bda ]

syzbot reported an UAF issue as below: [1] [2]

[1] https://syzkaller.appspot.com/text?tag=CrashReport&x=16594c60580000

==================================================================

BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
Read of size 8 at addr ffff888100567dc8 by task kworker/u4:0/8

CPU: 1 PID: 8 Comm: kworker/u4:0 Tainted: G        W          6.1.129-syzkaller-00017-g642656a36791 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Workqueue: writeback wb_workfn (flush-7:0)
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x151/0x1b7 lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:316 [inline]
 print_report+0x158/0x4e0 mm/kasan/report.c:427
 kasan_report+0x13c/0x170 mm/kasan/report.c:531
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:351
 __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
 __list_del_entry include/linux/list.h:134 [inline]
 list_del_init include/linux/list.h:206 [inline]
 f2fs_inode_synced+0x100/0x2e0 fs/f2fs/super.c:1553
 f2fs_update_inode+0x72/0x1c40 fs/f2fs/inode.c:588
 f2fs_update_inode_page+0x135/0x170 fs/f2fs/inode.c:706
 f2fs_write_inode+0x416/0x790 fs/f2fs/inode.c:734
 write_inode fs/fs-writeback.c:1460 [inline]
 __writeback_single_inode+0x4cf/0xb80 fs/fs-writeback.c:1677
 writeback_sb_inodes+0xb32/0x1910 fs/fs-writeback.c:1903
 __writeback_inodes_wb+0x118/0x3f0 fs/fs-writeback.c:1974
 wb_writeback+0x3da/0xa00 fs/fs-writeback.c:2081
 wb_check_background_flush fs/fs-writeback.c:2151 [inline]
 wb_do_writeback fs/fs-writeback.c:2239 [inline]
 wb_workfn+0xbba/0x1030 fs/fs-writeback.c:2266
 process_one_work+0x73d/0xcb0 kernel/workqueue.c:2299
 worker_thread+0xa60/0x1260 kernel/workqueue.c:2446
 kthread+0x26d/0x300 kernel/kthread.c:386
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
 </TASK>

Allocated by task 298:
 kasan_save_stack mm/kasan/common.c:45 [inline]
 kasan_set_track+0x4b/0x70 mm/kasan/common.c:52
 kasan_save_alloc_info+0x1f/0x30 mm/kasan/generic.c:505
 __kasan_slab_alloc+0x6c/0x80 mm/kasan/common.c:333
 kasan_slab_alloc include/linux/kasan.h:202 [inline]
 slab_post_alloc_hook+0x53/0x2c0 mm/slab.h:768
 slab_alloc_node mm/slub.c:3421 [inline]
 slab_alloc mm/slub.c:3431 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3438 [inline]
 kmem_cache_alloc_lru+0x102/0x270 mm/slub.c:3454
 alloc_inode_sb include/linux/fs.h:3255 [inline]
 f2fs_alloc_inode+0x2d/0x350 fs/f2fs/super.c:1437
 alloc_inode fs/inode.c:261 [inline]
 iget_locked+0x18c/0x7e0 fs/inode.c:1373
 f2fs_iget+0x55/0x4ca0 fs/f2fs/inode.c:486
 f2fs_lookup+0x3c1/0xb50 fs/f2fs/namei.c:484
 __lookup_slow+0x2b9/0x3e0 fs/namei.c:1689
 lookup_slow+0x5a/0x80 fs/namei.c:1706
 walk_component+0x2e7/0x410 fs/namei.c:1997
 lookup_last fs/namei.c:2454 [inline]
 path_lookupat+0x16d/0x450 fs/namei.c:2478
 filename_lookup+0x251/0x600 fs/namei.c:2507
 vfs_statx+0x107/0x4b0 fs/stat.c:229
 vfs_fstatat fs/stat.c:267 [inline]
 vfs_lstat include/linux/fs.h:3434 [inline]
 __do_sys_newlstat fs/stat.c:423 [inline]
 __se_sys_newlstat+0xda/0x7c0 fs/stat.c:417
 __x64_sys_newlstat+0x5b/0x70 fs/stat.c:417
 x64_sys_call+0x52/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:7
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x3b/0x80 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x68/0xd2

Freed by task 0:
 kasan_save_stack mm/kasan/common.c:45 [inline]
 kasan_set_track+0x4b/0x70 mm/kasan/common.c:52
 kasan_save_free_info+0x2b/0x40 mm/kasan/generic.c:516
 ____kasan_slab_free+0x131/0x180 mm/kasan/common.c:241
 __kasan_slab_free+0x11/0x20 mm/kasan/common.c:249
 kasan_slab_free include/linux/kasan.h:178 [inline]
 slab_free_hook mm/slub.c:1745 [inline]
 slab_free_freelist_hook mm/slub.c:1771 [inline]
 slab_free mm/slub.c:3686 [inline]
 kmem_cache_free+0x291/0x560 mm/slub.c:3711
 f2fs_free_inode+0x24/0x30 fs/f2fs/super.c:1584
 i_callback+0x4b/0x70 fs/inode.c:250
 rcu_do_batch+0x552/0xbe0 kernel/rcu/tree.c:2297
 rcu_core+0x502/0xf40 kernel/rcu/tree.c:2557
 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2574
 handle_softirqs+0x1db/0x650 kernel/softirq.c:624
 __do_softirq kernel/softirq.c:662 [inline]
 invoke_softirq kernel/softirq.c:479 [inline]
 __irq_exit_rcu+0x52/0xf0 kernel/softirq.c:711
 irq_exit_rcu+0x9/0x10 kernel/softirq.c:723
 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1118 [inline]
 sysvec_apic_timer_interrupt+0xa9/0xc0 arch/x86/kernel/apic/apic.c:1118
 asm_sysvec_apic_timer_interrupt+0x1b/0x20 arch/x86/include/asm/idtentry.h:691

Last potentially related work creation:
 kasan_save_stack+0x3b/0x60 mm/kasan/common.c:45
 __kasan_record_aux_stack+0xb4/0xc0 mm/kasan/generic.c:486
 kasan_record_aux_stack_noalloc+0xb/0x10 mm/kasan/generic.c:496
 __call_rcu_common kernel/rcu/tree.c:2807 [inline]
 call_rcu+0xdc/0x10f0 kernel/rcu/tree.c:2926
 destroy_inode fs/inode.c:316 [inline]
 evict+0x87d/0x930 fs/inode.c:720
 iput_final fs/inode.c:1834 [inline]
 iput+0x616/0x690 fs/inode.c:1860
 do_unlinkat+0x4e1/0x920 fs/namei.c:4396
 __do_sys_unlink fs/namei.c:4437 [inline]
 __se_sys_unlink fs/namei.c:4435 [inline]
 __x64_sys_unlink+0x49/0x50 fs/namei.c:4435
 x64_sys_call+0x289/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:88
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x3b/0x80 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x68/0xd2

The buggy address belongs to the object at ffff888100567a10
 which belongs to the cache f2fs_inode_cache of size 1360

The buggy address is located 952 bytes inside of
1360-byte region [ffff888100567a10, ffff888100567f60)

The buggy address belongs to the physical page:
page:ffffea0004015800 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x100560
head:ffffea0004015800 order:3 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=1)
raw: 4000000000010200 0000000000000000 dead000000000122 ffff8881002c4d80
raw: 0000000000000000 0000000080160016 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Reclaimable, gfp_mask 0xd2050(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_RECLAIMABLE), pid 298, tgid 298 (syz-executor330), ts 26489303743, free_ts 0
 set_page_owner include/linux/page_owner.h:33 [inline]
 post_alloc_hook+0x213/0x220 mm/page_alloc.c:2637
 prep_new_page+0x1b/0x110 mm/page_alloc.c:2644
 get_page_from_freelist+0x3a98/0x3b10 mm/page_alloc.c:4539
 __alloc_pages+0x234/0x610 mm/page_alloc.c:5837
 alloc_slab_page+0x6c/0xf0 include/linux/gfp.h:-1
 allocate_slab mm/slub.c:1962 [inline]
 new_slab+0x90/0x3e0 mm/slub.c:2015
 ___slab_alloc+0x6f9/0xb80 mm/slub.c:3203
 __slab_alloc+0x5d/0xa0 mm/slub.c:3302
 slab_alloc_node mm/slub.c:3387 [inline]
 slab_alloc mm/slub.c:3431 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3438 [inline]
 kmem_cache_alloc_lru+0x149/0x270 mm/slub.c:3454
 alloc_inode_sb include/linux/fs.h:3255 [inline]
 f2fs_alloc_inode+0x2d/0x350 fs/f2fs/super.c:1437
 alloc_inode fs/inode.c:261 [inline]
 iget_locked+0x18c/0x7e0 fs/inode.c:1373
 f2fs_iget+0x55/0x4ca0 fs/f2fs/inode.c:486
 f2fs_fill_super+0x5360/0x6dc0 fs/f2fs/super.c:4488
 mount_bdev+0x282/0x3b0 fs/super.c:1445
 f2fs_mount+0x34/0x40 fs/f2fs/super.c:4743
 legacy_get_tree+0xf1/0x190 fs/fs_context.c:632

page_owner free stack trace missing

Memory state around the buggy address:
 ffff888100567c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888100567d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff888100567d80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                              ^
 ffff888100567e00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff888100567e80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

[2] https://syzkaller.appspot.com/text?tag=CrashLog&x=13654c60580000

[   24.675720][   T28] audit: type=1400 audit(1745327318.732:72): avc:  denied  { write } for  pid=298 comm="syz-executor399" name="/" dev="loop0" ino=3 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:unlabeled_t tclass=dir permissive=1
[   24.705426][  T296] ------------[ cut here ]------------
[   24.706608][   T28] audit: type=1400 audit(1745327318.732:73): avc:  denied  { remove_name } for  pid=298 comm="syz-executor399" name="file0" dev="loop0" ino=4 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:unlabeled_t tclass=dir permissive=1
[   24.711550][  T296] WARNING: CPU: 0 PID: 296 at fs/f2fs/inode.c:847 f2fs_evict_inode+0x1262/0x1540
[   24.734141][   T28] audit: type=1400 audit(1745327318.732:74): avc:  denied  { rename } for  pid=298 comm="syz-executor399" name="file0" dev="loop0" ino=4 scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:unlabeled_t tclass=dir permissive=1
[   24.742969][  T296] Modules linked in:
[   24.765201][   T28] audit: type=1400 audit(1745327318.732:75): avc:  denied  { add_name } for  pid=298 comm="syz-executor399" name="bus" scontext=root:sysadm_r:sysadm_t tcontext=system_u:object_r:unlabeled_t tclass=dir permissive=1
[   24.768847][  T296] CPU: 0 PID: 296 Comm: syz-executor399 Not tainted 6.1.129-syzkaller-00017-g642656a36791 #0
[   24.799506][  T296] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
[   24.809401][  T296] RIP: 0010:f2fs_evict_inode+0x1262/0x1540
[   24.815018][  T296] Code: 34 70 4a ff eb 0d e8 2d 70 4a ff 4d 89 e5 4c 8b 64 24 18 48 8b 5c 24 28 4c 89 e7 e8 78 38 03 00 e9 84 fc ff ff e8 0e 70 4a ff <0f> 0b 4c 89 f7 be 08 00 00 00 e8 7f 21 92 ff f0 41 80 0e 04 e9 61
[   24.834584][  T296] RSP: 0018:ffffc90000db7a40 EFLAGS: 00010293
[   24.840465][  T296] RAX: ffffffff822aca42 RBX: 0000000000000002 RCX: ffff888110948000
[   24.848291][  T296] RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000
[   24.856064][  T296] RBP: ffffc90000db7bb0 R08: ffffffff822ac6a8 R09: ffffed10200b005d
[   24.864073][  T296] R10: 0000000000000000 R11: dffffc0000000001 R12: ffff888100580000
[   24.871812][  T296] R13: dffffc0000000000 R14: ffff88810fef4078 R15: 1ffff920001b6f5c

The root cause is w/ a fuzzed image, f2fs may missed to clear FI_DIRTY_INODE flag for target inode, after f2fs_evict_inode(), the inode is still linked in sbi->inode_list[DIRTY_META] global list, once it triggers checkpoint, f2fs_sync_inode_meta() may access the released inode.

In f2fs_evict_inode(), let's always call f2fs_inode_synced() to clear FI_DIRTY_INODE flag and drop inode from global dirty list to avoid this UAF issue.

Fixes 0f18b462b2e5 ("f2fs: flush inode metadata when checkpoint is doing")
---
 fs/f2fs/inode.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
fs/f2fs/inode.c +6 -2
index b0cbb01df8cb..859ff287467e 100644
@@ -740,8 +740,12 @@ void f2fs_evict_inode(struct inode *inode)
 	if (likely(!f2fs_cp_error(sbi) &&
 				!is_sbi_flag_set(sbi, SBI_CP_DISABLED)))
 		f2fs_bug_on(sbi, is_inode_flag_set(inode, FI_DIRTY_INODE));
-	else
-		f2fs_inode_synced(inode);
+
+	/*
+	 * anyway, it needs to remove the inode from sbi->inode_list[DIRTY_META]
+	 * list to avoid UAF in f2fs_sync_inode_meta() during checkpoint.
+	 */
+	f2fs_inode_synced(inode);
 
 	/* ino == 0, if f2fs_new_inode() was failed t*/
 	if (inode->i_ino)
Signature · 1 line
2.39.5
author maintainer
#139 lore raw

PATCH 135/403 f2fs: fix to avoid panic in f2fs_evict_inode

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chao Yu <[email protected]>

[ Upstream commit a509a55f8eecc8970b3980c6f06886bbff0e2f68 ]

As syzbot [1] reported as below:

R10: 0000000000000100 R11: 0000000000000206 R12: 00007ffe17473450
R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520

 </TASK>
---[ end trace 0000000000000000 ]---
==================================================================
BUG: KASAN: use-after-free in __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
Read of size 8 at addr ffff88812d962278 by task syz-executor/564

CPU: 1 PID: 564 Comm: syz-executor Tainted: G        W          6.1.129-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2025
Call Trace:
 <TASK>
 __dump_stack+0x21/0x24 lib/dump_stack.c:88
 dump_stack_lvl+0xee/0x158 lib/dump_stack.c:106
 print_address_description+0x71/0x210 mm/kasan/report.c:316
 print_report+0x4a/0x60 mm/kasan/report.c:427
 kasan_report+0x122/0x150 mm/kasan/report.c:531
 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report_generic.c:351
 __list_del_entry_valid+0xa6/0x130 lib/list_debug.c:62
 __list_del_entry include/linux/list.h:134 [inline]
 list_del_init include/linux/list.h:206 [inline]
 f2fs_inode_synced+0xf7/0x2e0 fs/f2fs/super.c:1531
 f2fs_update_inode+0x74/0x1c40 fs/f2fs/inode.c:585
 f2fs_update_inode_page+0x137/0x170 fs/f2fs/inode.c:703
 f2fs_write_inode+0x4ec/0x770 fs/f2fs/inode.c:731
 write_inode fs/fs-writeback.c:1460 [inline]
 __writeback_single_inode+0x4a0/0xab0 fs/fs-writeback.c:1677
 writeback_single_inode+0x221/0x8b0 fs/fs-writeback.c:1733
 sync_inode_metadata+0xb6/0x110 fs/fs-writeback.c:2789
 f2fs_sync_inode_meta+0x16d/0x2a0 fs/f2fs/checkpoint.c:1159
 block_operations fs/f2fs/checkpoint.c:1269 [inline]
 f2fs_write_checkpoint+0xca3/0x2100 fs/f2fs/checkpoint.c:1658
 kill_f2fs_super+0x231/0x390 fs/f2fs/super.c:4668
 deactivate_locked_super+0x98/0x100 fs/super.c:332
 deactivate_super+0xaf/0xe0 fs/super.c:363
 cleanup_mnt+0x45f/0x4e0 fs/namespace.c:1186
 __cleanup_mnt+0x19/0x20 fs/namespace.c:1193
 task_work_run+0x1c6/0x230 kernel/task_work.c:203
 exit_task_work include/linux/task_work.h:39 [inline]
 do_exit+0x9fb/0x2410 kernel/exit.c:871
 do_group_exit+0x210/0x2d0 kernel/exit.c:1021
 __do_sys_exit_group kernel/exit.c:1032 [inline]
 __se_sys_exit_group kernel/exit.c:1030 [inline]
 __x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1030
 x64_sys_call+0x7b4/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:232
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x68/0xd2
RIP: 0033:0x7f28b1b8e169
Code: Unable to access opcode bytes at 0x7f28b1b8e13f.
RSP: 002b:00007ffe174710a8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00007f28b1c10879 RCX: 00007f28b1b8e169
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000001
RBP: 0000000000000002 R08: 00007ffe1746ee47 R09: 00007ffe17472360
R10: 0000000000000009 R11: 0000000000000246 R12: 00007ffe17472360
R13: 00007f28b1c10854 R14: 000000000000dae5 R15: 00007ffe17474520
 </TASK>

Allocated by task 569:
 kasan_save_stack mm/kasan/common.c:45 [inline]
 kasan_set_track+0x4b/0x70 mm/kasan/common.c:52
 kasan_save_alloc_info+0x25/0x30 mm/kasan/generic.c:505
 __kasan_slab_alloc+0x72/0x80 mm/kasan/common.c:328
 kasan_slab_alloc include/linux/kasan.h:201 [inline]
 slab_post_alloc_hook+0x4f/0x2c0 mm/slab.h:737
 slab_alloc_node mm/slub.c:3398 [inline]
 slab_alloc mm/slub.c:3406 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3413 [inline]
 kmem_cache_alloc_lru+0x104/0x220 mm/slub.c:3429
 alloc_inode_sb include/linux/fs.h:3245 [inline]
 f2fs_alloc_inode+0x2d/0x340 fs/f2fs/super.c:1419
 alloc_inode fs/inode.c:261 [inline]
 iget_locked+0x186/0x880 fs/inode.c:1373
 f2fs_iget+0x55/0x4c60 fs/f2fs/inode.c:483
 f2fs_lookup+0x366/0xab0 fs/f2fs/namei.c:487
 __lookup_slow+0x2a3/0x3d0 fs/namei.c:1690
 lookup_slow+0x57/0x70 fs/namei.c:1707
 walk_component+0x2e6/0x410 fs/namei.c:1998
 lookup_last fs/namei.c:2455 [inline]
 path_lookupat+0x180/0x490 fs/namei.c:2479
 filename_lookup+0x1f0/0x500 fs/namei.c:2508
 vfs_statx+0x10b/0x660 fs/stat.c:229
 vfs_fstatat fs/stat.c:267 [inline]
 vfs_lstat include/linux/fs.h:3424 [inline]
 __do_sys_newlstat fs/stat.c:423 [inline]
 __se_sys_newlstat+0xd5/0x350 fs/stat.c:417
 __x64_sys_newlstat+0x5b/0x70 fs/stat.c:417
 x64_sys_call+0x393/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:7
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x68/0xd2

Freed by task 13:
 kasan_save_stack mm/kasan/common.c:45 [inline]
 kasan_set_track+0x4b/0x70 mm/kasan/common.c:52
 kasan_save_free_info+0x31/0x50 mm/kasan/generic.c:516
 ____kasan_slab_free+0x132/0x180 mm/kasan/common.c:236
 __kasan_slab_free+0x11/0x20 mm/kasan/common.c:244
 kasan_slab_free include/linux/kasan.h:177 [inline]
 slab_free_hook mm/slub.c:1724 [inline]
 slab_free_freelist_hook+0xc2/0x190 mm/slub.c:1750
 slab_free mm/slub.c:3661 [inline]
 kmem_cache_free+0x12d/0x2a0 mm/slub.c:3683
 f2fs_free_inode+0x24/0x30 fs/f2fs/super.c:1562
 i_callback+0x4c/0x70 fs/inode.c:250
 rcu_do_batch+0x503/0xb80 kernel/rcu/tree.c:2297
 rcu_core+0x5a2/0xe70 kernel/rcu/tree.c:2557
 rcu_core_si+0x9/0x10 kernel/rcu/tree.c:2574
 handle_softirqs+0x178/0x500 kernel/softirq.c:578
 run_ksoftirqd+0x28/0x30 kernel/softirq.c:945
 smpboot_thread_fn+0x45a/0x8c0 kernel/smpboot.c:164
 kthread+0x270/0x310 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295

Last potentially related work creation:
 kasan_save_stack+0x3a/0x60 mm/kasan/common.c:45
 __kasan_record_aux_stack+0xb6/0xc0 mm/kasan/generic.c:486
 kasan_record_aux_stack_noalloc+0xb/0x10 mm/kasan/generic.c:496
 call_rcu+0xd4/0xf70 kernel/rcu/tree.c:2845
 destroy_inode fs/inode.c:316 [inline]
 evict+0x7da/0x870 fs/inode.c:720
 iput_final fs/inode.c:1834 [inline]
 iput+0x62b/0x830 fs/inode.c:1860
 do_unlinkat+0x356/0x540 fs/namei.c:4397
 __do_sys_unlink fs/namei.c:4438 [inline]
 __se_sys_unlink fs/namei.c:4436 [inline]
 __x64_sys_unlink+0x49/0x50 fs/namei.c:4436
 x64_sys_call+0x958/0x9a0 arch/x86/include/generated/asm/syscalls_64.h:88
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x4c/0xa0 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x68/0xd2

The buggy address belongs to the object at ffff88812d961f20
 which belongs to the cache f2fs_inode_cache of size 1200

The buggy address is located 856 bytes inside of
1200-byte region [ffff88812d961f20, ffff88812d9623d0)

The buggy address belongs to the physical page:
page:ffffea0004b65800 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x12d960
head:ffffea0004b65800 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4000000000010200(slab|head|zone=1)
raw: 4000000000010200 0000000000000000 dead000000000122 ffff88810a94c500
raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 2, migratetype Reclaimable, gfp_mask 0x1d2050(__GFP_IO|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL|__GFP_RECLAIMABLE), pid 569, tgid 568 (syz.2.16), ts 55943246141, free_ts 0
 set_page_owner include/linux/page_owner.h:31 [inline]
 post_alloc_hook+0x1d0/0x1f0 mm/page_alloc.c:2532
 prep_new_page mm/page_alloc.c:2539 [inline]
 get_page_from_freelist+0x2e63/0x2ef0 mm/page_alloc.c:4328
 __alloc_pages+0x235/0x4b0 mm/page_alloc.c:5605
 alloc_slab_page include/linux/gfp.h:-1 [inline]
 allocate_slab mm/slub.c:1939 [inline]
 new_slab+0xec/0x4b0 mm/slub.c:1992
 ___slab_alloc+0x6f6/0xb50 mm/slub.c:3180
 __slab_alloc+0x5e/0xa0 mm/slub.c:3279
 slab_alloc_node mm/slub.c:3364 [inline]
 slab_alloc mm/slub.c:3406 [inline]
 __kmem_cache_alloc_lru mm/slub.c:3413 [inline]
 kmem_cache_alloc_lru+0x13f/0x220 mm/slub.c:3429
 alloc_inode_sb include/linux/fs.h:3245 [inline]
 f2fs_alloc_inode+0x2d/0x340 fs/f2fs/super.c:1419
 alloc_inode fs/inode.c:261 [inline]
 iget_locked+0x186/0x880 fs/inode.c:1373
 f2fs_iget+0x55/0x4c60 fs/f2fs/inode.c:483
 f2fs_fill_super+0x3ad7/0x6bb0 fs/f2fs/super.c:4293
 mount_bdev+0x2ae/0x3e0 fs/super.c:1443
 f2fs_mount+0x34/0x40 fs/f2fs/super.c:4642
 legacy_get_tree+0xea/0x190 fs/fs_context.c:632
 vfs_get_tree+0x89/0x260 fs/super.c:1573
 do_new_mount+0x25a/0xa20 fs/namespace.c:3056

page_owner free stack trace missing

Memory state around the buggy address:
 ffff88812d962100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88812d962180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88812d962200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                                ^
 ffff88812d962280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88812d962300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================

[1] https://syzkaller.appspot.com/x/report.txt?x=13448368580000

This bug can be reproduced w/ the reproducer [2], once we enable CONFIG_F2FS_CHECK_FS config, the reproducer will trigger panic as below, so the direct reason of this bug is the same as the one below patch [3] fixed.

kernel BUG at fs/f2fs/inode.c:857!

RIP: 0010:f2fs_evict_inode+0x1204/0x1a20
Call Trace:
 <TASK>
 evict+0x32a/0x7a0
 do_unlinkat+0x37b/0x5b0
 __x64_sys_unlink+0xad/0x100
 do_syscall_64+0x5a/0xb0
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8
RIP: 0010:f2fs_evict_inode+0x1204/0x1a20

[2] https://syzkaller.appspot.com/x/repro.c?x=17495ccc580000
[3] https://lore.kernel.org/linux-f2fs-devel/[email protected]

Tracepoints before panic:

f2fs_unlink_enter: dev = (7,0), dir ino = 3, i_size = 4096, i_blocks = 8, name = file1
f2fs_unlink_exit: dev = (7,0), ino = 7, ret = 0
f2fs_evict_inode: dev = (7,0), ino = 7, pino = 3, i_mode = 0x81ed, i_size = 10, i_nlink = 0, i_blocks = 0, i_advise = 0x0
f2fs_truncate_node: dev = (7,0), ino = 7, nid = 8, block_address = 0x3c05

f2fs_unlink_enter: dev = (7,0), dir ino = 3, i_size = 4096, i_blocks = 8, name = file3
f2fs_unlink_exit: dev = (7,0), ino = 8, ret = 0
f2fs_evict_inode: dev = (7,0), ino = 8, pino = 3, i_mode = 0x81ed, i_size = 9000, i_nlink = 0, i_blocks = 24, i_advise = 0x4
f2fs_truncate: dev = (7,0), ino = 8, pino = 3, i_mode = 0x81ed, i_size = 0, i_nlink = 0, i_blocks = 24, i_advise = 0x4 f2fs_truncate_blocks_enter: dev = (7,0), ino = 8, i_size = 0, i_blocks = 24, start file offset = 0
f2fs_truncate_blocks_exit: dev = (7,0), ino = 8, ret = -2

The root cause is: in the fuzzed image, dnode #8 belongs to inode #7, after inode #7 eviction, dnode #8 was dropped.

However there is dirent that has ino #8, so, once we unlink file3, in f2fs_evict_inode(), both f2fs_truncate() and f2fs_update_inode_page() will fail due to we can not load node #8, result in we missed to call f2fs_inode_synced() to clear inode dirty status.

Let's fix this by calling f2fs_inode_synced() in error path of f2fs_evict_inode().

PS: As I verified, the reproducer [2] can trigger this bug in v6.1.129, but it failed in v6.16-rc4, this is because the testcase will stop due to other corruption has been detected by f2fs:

F2FS-fs (loop0): inconsistent node block, node_type:2, nid:8, node_footer[nid:8,ino:8,ofs:0,cpver:5013063228981249506,blkaddr:15366] F2FS-fs (loop0): f2fs_lookup: inode (ino=9) has zero i_nlink

Fixes 0f18b462b2e5 ("f2fs: flush inode metadata when checkpoint is doing")
---
 fs/f2fs/inode.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)
fs/f2fs/inode.c +13 -0
index 859ff287467e..03444ebc741b 100644
@@ -728,6 +728,19 @@ void f2fs_evict_inode(struct inode *inode)
 		f2fs_update_inode_page(inode);
 		if (dquot_initialize_needed(inode))
 			set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR);
+
+		/*
+		 * If both f2fs_truncate() and f2fs_update_inode_page() failed
+		 * due to fuzzed corrupted inode, call f2fs_inode_synced() to
+		 * avoid triggering later f2fs_bug_on().
+		 */
+		if (is_inode_flag_set(inode, FI_DIRTY_INODE)) {
+			f2fs_warn(sbi,
+				"f2fs_evict_inode: inode is dirty, ino:%lu",
+				inode->i_ino);
+			f2fs_inode_synced(inode);
+			set_sbi_flag(sbi, SBI_NEED_FSCK);
+		}
 	}
 	sb_end_intwrite(inode->i_sb);
 no_delete:
Signature · 1 line
2.39.5
author maintainer
#140 lore raw

PATCH 136/403 f2fs: fix to avoid out-of-boundary access in devs.path

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chao Yu <[email protected]>

[ Upstream commit 5661998536af52848cc4d52a377e90368196edea ]

- touch /mnt/f2fs/012345678901234567890123456789012345678901234567890123
- truncate -s $((1024*1024*1024)) \
/mnt/f2fs/012345678901234567890123456789012345678901234567890123
- touch /mnt/f2fs/file
- truncate -s $((1024*1024*1024)) /mnt/f2fs/file
- mkfs.f2fs /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
-c /mnt/f2fs/file
- mount /mnt/f2fs/012345678901234567890123456789012345678901234567890123 \
/mnt/f2fs/loop

[16937.192225] F2FS-fs (loop0): Mount Device [ 0]: /mnt/f2fs/012345678901234567890123456789012345678901234567890123\xff\x01,      511,        0 -    3ffff
[16937.192268] F2FS-fs (loop0): Failed to find devices

If device path length equals to MAX_PATH_LEN, sbi->devs.path[] may not end up w/ null character due to path array is fully filled, So accidently, fields locate after path[] may be treated as part of device path, result in parsing wrong device path.

struct f2fs_dev_info {
...

	char path[MAX_PATH_LEN];

...
};

Let's add one byte space for sbi->devs.path[] to store null character of device path string.

Fixes 3c62be17d4f5 ("f2fs: support multiple devices")
---
 fs/f2fs/f2fs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
fs/f2fs/f2fs.h +1 -1
index 1b8f41daddba..e17b19bb4148 100644
@@ -1098,7 +1098,7 @@ struct f2fs_bio_info {
 #define RDEV(i)				(raw_super->devs[i])
 struct f2fs_dev_info {
 	struct block_device *bdev;
-	char path[MAX_PATH_LEN];
+	char path[MAX_PATH_LEN + 1];
 	unsigned int total_segments;
 	block_t start_blk;
 	block_t end_blk;
Signature · 1 line
2.39.5
author maintainer
#141 lore raw

PATCH 137/403 usb: chipidea: udc: fix sleeping function called from invalid context

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Chen <[email protected]>

[ Upstream commit 7368760d1bcdabf515c41a502568b489de3da683 ]

The code calls pm_runtime_get_sync with irq disabled, it causes below warning:

BUG: sleeping function called from invalid context at
wer/runtime.c:1075
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid:
er/u8:1
CPU: 1 PID: 37 Comm: kworker/u8:1 Not tainted
20200304-00181-gbebfd2a5be98 #1588
Hardware name: NVIDIA Tegra SoC (Flattened Device Tree)
Workqueue: ci_otg ci_otg_work

[<c010e8bd>] (unwind_backtrace) from [<c010a315>] 1/0x14)
[<c010a315>] (show_stack) from [<c0987d29>] 5/0x94)
[<c0987d29>] (dump_stack) from [<c013e77f>] +0xeb/0x118)
[<c013e77f>] (___might_sleep) from [<c052fa1d>] esume+0x75/0x78)
[<c052fa1d>] (__pm_runtime_resume) from [<c0627a33>] 0x23/0x74)
[<c0627a33>] (ci_udc_pullup) from [<c062fb93>] nect+0x2b/0xcc)
[<c062fb93>] (usb_gadget_connect) from [<c062769d>] _connect+0x59/0x104)
[<c062769d>] (ci_hdrc_gadget_connect) from [<c062778b>] ssion+0x43/0x48)
[<c062778b>] (ci_udc_vbus_session) from [<c062f997>] s_connect+0x17/0x9c)
[<c062f997>] (usb_gadget_vbus_connect) from [<c062634d>] bd/0x128)
[<c062634d>] (ci_otg_work) from [<c0134719>] rk+0x149/0x404)
[<c0134719>] (process_one_work) from [<c0134acb>] 0xf7/0x3bc)
[<c0134acb>] (worker_thread) from [<c0139433>] x118)
[<c0139433>] (kthread) from [<c01010bd>] (ret_from_fork+0x11/0x34)

---
 drivers/usb/chipidea/udc.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/usb/chipidea/udc.c +4 -3
index 19a9a4b83346..d483a957804b 100644
@@ -1539,18 +1539,19 @@ static const struct usb_ep_ops usb_ep_ops = {
 static void ci_hdrc_gadget_connect(struct usb_gadget *_gadget, int is_active)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
-	unsigned long flags;
 
 	if (is_active) {
 		pm_runtime_get_sync(&_gadget->dev);
 		hw_device_reset(ci);
-		spin_lock_irqsave(&ci->lock, flags);
+		spin_lock_irq(&ci->lock);
 		if (ci->driver) {
 			hw_device_state(ci, ci->ep0out->qh.dma);
 			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+			spin_unlock_irq(&ci->lock);
 			usb_udc_vbus_handler(_gadget, true);
+		} else {
+			spin_unlock_irq(&ci->lock);
 		}
-		spin_unlock_irqrestore(&ci->lock, flags);
 	} else {
 		usb_udc_vbus_handler(_gadget, false);
 		if (ci->driver)
Signature · 1 line
2.39.5
author maintainer
#142 lore raw

PATCH 138/403 pci/hotplug/pnv-php: Improve error msg on power state change failure

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Frederic Barrat <[email protected]>

[ Upstream commit 323c2a26ff43500a96799250330fab68903d776f ]

When changing the slot state, if opal hits an error and tells as such in the asynchronous reply, the warning "Wrong msg" is logged, which is rather confusing. Instead we can reuse the better message which is already used when we couldn't submit the asynchronous opal request initially.

Stable-dep-of: 466861909255 ("PCI: pnv_php: Clean up allocated IRQs on unplug")

---
 drivers/pci/hotplug/pnv_php.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)
drivers/pci/hotplug/pnv_php.c +11 -5
index 382494261830..8223fe0b751f 100644
@@ -341,18 +341,19 @@ int pnv_php_set_slot_power_state(struct hotplug_slot *slot,
 	ret = pnv_pci_set_power_state(php_slot->id, state, &msg);
 	if (ret > 0) {
 		if (be64_to_cpu(msg.params[1]) != php_slot->dn->phandle	||
-		    be64_to_cpu(msg.params[2]) != state			||
-		    be64_to_cpu(msg.params[3]) != OPAL_SUCCESS) {
+		    be64_to_cpu(msg.params[2]) != state) {
 			pci_warn(php_slot->pdev, "Wrong msg (%lld, %lld, %lld)\n",
 				 be64_to_cpu(msg.params[1]),
 				 be64_to_cpu(msg.params[2]),
 				 be64_to_cpu(msg.params[3]));
 			return -ENOMSG;
 		}
+		if (be64_to_cpu(msg.params[3]) != OPAL_SUCCESS) {
+			ret = -ENODEV;
+			goto error;
+		}
 	} else if (ret < 0) {
-		pci_warn(php_slot->pdev, "Error %d powering %s\n",
-			 ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" : "off");
-		return ret;
+		goto error;
 	}
 
 	if (state == OPAL_PCI_SLOT_POWER_OFF || state == OPAL_PCI_SLOT_OFFLINE)
@@ -361,6 +362,11 @@ int pnv_php_set_slot_power_state(struct hotplug_slot *slot,
 		ret = pnv_php_add_devtree(php_slot);
 
 	return ret;
+
+error:
+	pci_warn(php_slot->pdev, "Error %d powering %s\n",
+		 ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" : "off");
+	return ret;
 }
 EXPORT_SYMBOL_GPL(pnv_php_set_slot_power_state);
 
Signature · 1 line
2.39.5
author maintainer
#143 lore raw

PATCH 139/403 pci/hotplug/pnv-php: Wrap warnings in macro

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Frederic Barrat <[email protected]>

[ Upstream commit 748ac391ab9acd8d7f3c93cbf3e63c773c0b2638 ]

An opencapi slot doesn't have an associated bridge device. It's not needed for operation, but any warning is displayed through pci_warn() which uses the pci_dev struct of the assocated bridge device. So wrap those warning so that a different trace mechanism can be used if it's an opencapi slot.

Stable-dep-of: 466861909255 ("PCI: pnv_php: Clean up allocated IRQs on unplug")

---
 drivers/pci/hotplug/pnv_php.c | 51 +++++++++++++++++++----------------
 1 file changed, 28 insertions(+), 23 deletions(-)
drivers/pci/hotplug/pnv_php.c +28 -23
index 8223fe0b751f..3687a99383c1 100644
@@ -18,6 +18,9 @@
 #define DRIVER_AUTHOR	"Gavin Shan, IBM Corporation"
 #define DRIVER_DESC	"PowerPC PowerNV PCI Hotplug Driver"
 
+#define SLOT_WARN(sl, x...) \
+	((sl)->pdev ? pci_warn((sl)->pdev, x) : dev_warn(&(sl)->bus->dev, x))
+
 struct pnv_php_event {
 	bool			added;
 	struct pnv_php_slot	*php_slot;
@@ -270,7 +273,7 @@ static int pnv_php_add_devtree(struct pnv_php_slot *php_slot)
 
 	ret = pnv_pci_get_device_tree(php_slot->dn->phandle, fdt1, 0x10000);
 	if (ret) {
-		pci_warn(php_slot->pdev, "Error %d getting FDT blob\n", ret);
+		SLOT_WARN(php_slot, "Error %d getting FDT blob\n", ret);
 		goto free_fdt1;
 	}
 
@@ -284,7 +287,7 @@ static int pnv_php_add_devtree(struct pnv_php_slot *php_slot)
 	dt = of_fdt_unflatten_tree(fdt, php_slot->dn, NULL);
 	if (!dt) {
 		ret = -EINVAL;
-		pci_warn(php_slot->pdev, "Cannot unflatten FDT\n");
+		SLOT_WARN(php_slot, "Cannot unflatten FDT\n");
 		goto free_fdt;
 	}
 
@@ -294,15 +297,15 @@ static int pnv_php_add_devtree(struct pnv_php_slot *php_slot)
 	ret = pnv_php_populate_changeset(&php_slot->ocs, php_slot->dn);
 	if (ret) {
 		pnv_php_reverse_nodes(php_slot->dn);
-		pci_warn(php_slot->pdev, "Error %d populating changeset\n",
-			 ret);
+		SLOT_WARN(php_slot, "Error %d populating changeset\n",
+			  ret);
 		goto free_dt;
 	}
 
 	php_slot->dn->child = NULL;
 	ret = of_changeset_apply(&php_slot->ocs);
 	if (ret) {
-		pci_warn(php_slot->pdev, "Error %d applying changeset\n", ret);
+		SLOT_WARN(php_slot, "Error %d applying changeset\n", ret);
 		goto destroy_changeset;
 	}
 
@@ -342,10 +345,10 @@ int pnv_php_set_slot_power_state(struct hotplug_slot *slot,
 	if (ret > 0) {
 		if (be64_to_cpu(msg.params[1]) != php_slot->dn->phandle	||
 		    be64_to_cpu(msg.params[2]) != state) {
-			pci_warn(php_slot->pdev, "Wrong msg (%lld, %lld, %lld)\n",
-				 be64_to_cpu(msg.params[1]),
-				 be64_to_cpu(msg.params[2]),
-				 be64_to_cpu(msg.params[3]));
+			SLOT_WARN(php_slot, "Wrong msg (%lld, %lld, %lld)\n",
+				  be64_to_cpu(msg.params[1]),
+				  be64_to_cpu(msg.params[2]),
+				  be64_to_cpu(msg.params[3]));
 			return -ENOMSG;
 		}
 		if (be64_to_cpu(msg.params[3]) != OPAL_SUCCESS) {
@@ -364,8 +367,8 @@ int pnv_php_set_slot_power_state(struct hotplug_slot *slot,
 	return ret;
 
 error:
-	pci_warn(php_slot->pdev, "Error %d powering %s\n",
-		 ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" : "off");
+	SLOT_WARN(php_slot, "Error %d powering %s\n",
+		  ret, (state == OPAL_PCI_SLOT_POWER_ON) ? "on" : "off");
 	return ret;
 }
 EXPORT_SYMBOL_GPL(pnv_php_set_slot_power_state);
@@ -383,8 +386,8 @@ static int pnv_php_get_power_state(struct hotplug_slot *slot, u8 *state)
 	 */
 	ret = pnv_pci_get_power_state(php_slot->id, &power_state);
 	if (ret) {
-		pci_warn(php_slot->pdev, "Error %d getting power status\n",
-			 ret);
+		SLOT_WARN(php_slot, "Error %d getting power status\n",
+			  ret);
 	} else {
 		*state = power_state;
 	}
@@ -407,7 +410,7 @@ static int pnv_php_get_adapter_state(struct hotplug_slot *slot, u8 *state)
 		*state = presence;
 		ret = 0;
 	} else {
-		pci_warn(php_slot->pdev, "Error %d getting presence\n", ret);
+		SLOT_WARN(php_slot, "Error %d getting presence\n", ret);
 	}
 
 	return ret;
@@ -680,7 +683,7 @@ static int pnv_php_register_slot(struct pnv_php_slot *php_slot)
 	ret = pci_hp_register(&php_slot->slot, php_slot->bus,
 			      php_slot->slot_no, php_slot->name);
 	if (ret) {
-		pci_warn(php_slot->pdev, "Error %d registering slot\n", ret);
+		SLOT_WARN(php_slot, "Error %d registering slot\n", ret);
 		return ret;
 	}
 
@@ -733,7 +736,7 @@ static int pnv_php_enable_msix(struct pnv_php_slot *php_slot)
 	/* Enable MSIx */
 	ret = pci_enable_msix_exact(pdev, &entry, 1);
 	if (ret) {
-		pci_warn(pdev, "Error %d enabling MSIx\n", ret);
+		SLOT_WARN(php_slot, "Error %d enabling MSIx\n", ret);
 		return ret;
 	}
 
@@ -783,8 +786,9 @@ static irqreturn_t pnv_php_interrupt(int irq, void *data)
 		   (sts & PCI_EXP_SLTSTA_PDC)) {
 		ret = pnv_pci_get_presence_state(php_slot->id, &presence);
 		if (ret) {
-			pci_warn(pdev, "PCI slot [%s] error %d getting presence (0x%04x), to retry the operation.\n",
-				 php_slot->name, ret, sts);
+			SLOT_WARN(php_slot,
+				  "PCI slot [%s] error %d getting presence (0x%04x), to retry the operation.\n",
+				  php_slot->name, ret, sts);
 			return IRQ_HANDLED;
 		}
 
@@ -814,8 +818,9 @@ static irqreturn_t pnv_php_interrupt(int irq, void *data)
 	 */
 	event = kzalloc(sizeof(*event), GFP_ATOMIC);
 	if (!event) {
-		pci_warn(pdev, "PCI slot [%s] missed hotplug event 0x%04x\n",
-			 php_slot->name, sts);
+		SLOT_WARN(php_slot,
+			  "PCI slot [%s] missed hotplug event 0x%04x\n",
+			  php_slot->name, sts);
 		return IRQ_HANDLED;
 	}
 
@@ -839,7 +844,7 @@ static void pnv_php_init_irq(struct pnv_php_slot *php_slot, int irq)
 	/* Allocate workqueue */
 	php_slot->wq = alloc_workqueue("pciehp-%s", 0, 0, php_slot->name);
 	if (!php_slot->wq) {
-		pci_warn(pdev, "Cannot alloc workqueue\n");
+		SLOT_WARN(php_slot, "Cannot alloc workqueue\n");
 		pnv_php_disable_irq(php_slot, true);
 		return;
 	}
@@ -863,7 +868,7 @@ static void pnv_php_init_irq(struct pnv_php_slot *php_slot, int irq)
 			  php_slot->name, php_slot);
 	if (ret) {
 		pnv_php_disable_irq(php_slot, true);
-		pci_warn(pdev, "Error %d enabling IRQ %d\n", ret, irq);
+		SLOT_WARN(php_slot, "Error %d enabling IRQ %d\n", ret, irq);
 		return;
 	}
 
@@ -899,7 +904,7 @@ static void pnv_php_enable_irq(struct pnv_php_slot *php_slot)
 
 	ret = pci_enable_device(pdev);
 	if (ret) {
-		pci_warn(pdev, "Error %d enabling device\n", ret);
+		SLOT_WARN(php_slot, "Error %d enabling device\n", ret);
 		return;
 	}
 
Signature · 1 line
2.39.5
author maintainer
#144 lore raw

PATCH 140/403 NFS: Fix filehandle bounds checking in nfs_fh_to_dentry()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <[email protected]>

[ Upstream commit ef93a685e01a281b5e2a25ce4e3428cf9371a205 ]

The function needs to check the minimal filehandle length before it can access the embedded filehandle.

Fixes 20fa19027286 ("nfs: add export operations")
---
 fs/nfs/export.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)
fs/nfs/export.c +9 -2
index deecb67638aa..97b6fa0adb57 100644
@@ -67,14 +67,21 @@ nfs_fh_to_dentry(struct super_block *sb, struct fid *fid,
 	struct nfs4_label *label = NULL;
 	struct nfs_fattr *fattr = NULL;
 	struct nfs_fh *server_fh = nfs_exp_embedfh(fid->raw);
-	size_t fh_size = offsetof(struct nfs_fh, data) + server_fh->size;
+	size_t fh_size = offsetof(struct nfs_fh, data);
 	const struct nfs_rpc_ops *rpc_ops;
 	struct dentry *dentry;
 	struct inode *inode;
-	int len = EMBED_FH_OFF + XDR_QUADLEN(fh_size);
+	int len = EMBED_FH_OFF;
 	u32 *p = fid->raw;
 	int ret;
 
+	/* Initial check of bounds */
+	if (fh_len < len + XDR_QUADLEN(fh_size) ||
+	    fh_len > XDR_QUADLEN(NFS_MAXFHSIZE))
+		return NULL;
+	/* Calculate embedded filehandle size */
+	fh_size += server_fh->size;
+	len += XDR_QUADLEN(fh_size);
 	/* NULL translates to ESTALE */
 	if (fh_len < len || fh_type != len)
 		return NULL;
Signature · 1 line
2.39.5
author maintainer
#145 lore raw

PATCH 141/403 netpoll: prevent hanging NAPI when netcons gets enabled

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jakub Kicinski <[email protected]>

[ Upstream commit 2da4def0f487f24bbb0cece3bb2bcdcb918a0b72 ]

Paolo spotted hangs in NIPA running driver tests against virtio. The tests hang in virtnet_close() -> virtnet_napi_tx_disable().

The problem is only reproducible if running multiple of our tests in sequence (I used TEST_PROGS="xdp.py ping.py netcons_basic.sh \
netpoll_basic.py stats.py"). Initial suspicion was that this is a simple case of double-disable of NAPI, but instrumenting the code reveals:

Deadlocked on NAPI ffff888007cd82c0 (virtnet_poll_tx):
state: 0x37, disabled: false, owner: 0, listed: false, weight: 64

The NAPI was not in fact disabled, owner is 0 (rather than -1), so the NAPI "thinks" it's scheduled for CPU 0 but it's not listed (!list_empty(&n->poll_list) => false). It seems odd that normal NAPI processing would wedge itself like this.

Better suspicion is that netpoll gets enabled while NAPI is polling, and also grabs the NAPI instance. This confuses napi_complete_done():

[netpoll] [normal NAPI]

                                        napi_poll()
                                          have = netpoll_poll_lock()
                                            rcu_access_pointer(dev->npinfo)
                                              return NULL # no netpoll
                                          __napi_poll()
					    ->poll(->weight)
  poll_napi()
    cmpxchg(->poll_owner, -1, cpu)
      poll_one_napi()
        set_bit(NAPI_STATE_NPSVC, ->state)
                                              napi_complete_done()
                                                if (NAPIF_STATE_NPSVC)
                                                  return false
                                           # exit without clearing SCHED

This feels very unlikely, but perhaps virtio has some interactions with the hypervisor in the NAPI ->poll that makes the race window larger?

Best I could to to prove the theory was to add and trigger this warning in napi_poll (just before netpoll_poll_unlock()):

      WARN_ONCE(!have && rcu_access_pointer(n->dev->npinfo) &&
                napi_is_scheduled(n) && list_empty(&n->poll_list),
                "NAPI race with netpoll %px", n);

If this warning hits the next virtio_close() will hang.

This patch survived 30 test iterations without a hang (without it the longest clean run was around 10). Credit for triggering this goes to Breno's recent netconsole tests.

---
 net/core/netpoll.c | 7 +++++++
 1 file changed, 7 insertions(+)
net/core/netpoll.c +7 -0
index 940d371f5f3b..09ae2fc41fa9 100644
@@ -807,6 +807,13 @@ int netpoll_setup(struct netpoll *np)
 		goto put;
 
 	rtnl_unlock();
+
+	/* Make sure all NAPI polls which started before dev->npinfo
+	 * was visible have exited before we start calling NAPI poll.
+	 * NAPI skips locking if dev->npinfo is NULL.
+	 */
+	synchronize_rcu();
+
 	return 0;
 
 put:
Signature · 1 line
2.39.5
author maintainer
#146 lore raw

PATCH 142/403 pptp: ensure minimal skb length in pptp_xmit()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit de9c4861fb42f0cd72da844c3c34f692d5895b7b ]

Commit aabc6596ffb3 ("net: ppp: Add bound checking for skb data on ppp_sync_txmung") fixed ppp_sync_txmunge()

We need a similar fix in pptp_xmit(), otherwise we might read uninit data as reported by syzbot.

BUG: KMSAN: uninit-value in pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193
  pptp_xmit+0xc34/0x2720 drivers/net/ppp/pptp.c:193
  ppp_channel_bridge_input drivers/net/ppp/ppp_generic.c:2290 [inline]
  ppp_input+0x1d6/0xe60 drivers/net/ppp/ppp_generic.c:2314
  pppoe_rcv_core+0x1e8/0x760 drivers/net/ppp/pppoe.c:379
  sk_backlog_rcv+0x142/0x420 include/net/sock.h:1148
  __release_sock+0x1d3/0x330 net/core/sock.c:3213
  release_sock+0x6b/0x270 net/core/sock.c:3767
  pppoe_sendmsg+0x15d/0xcb0 drivers/net/ppp/pppoe.c:904
  sock_sendmsg_nosec net/socket.c:712 [inline]
  __sock_sendmsg+0x330/0x3d0 net/socket.c:727
  ____sys_sendmsg+0x893/0xd80 net/socket.c:2566
  ___sys_sendmsg+0x271/0x3b0 net/socket.c:2620
  __sys_sendmmsg+0x2d9/0x7c0 net/socket.c:2709
---
 drivers/net/ppp/pptp.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)
drivers/net/ppp/pptp.c +9 -6
index e1fabb3e3246..5e2f4702aa2b 100644
@@ -141,9 +141,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	int len;
 	unsigned char *data;
 	__u32 seq_recv;
-
-
-	struct rtable *rt;
+	struct rtable *rt = NULL;
 	struct net_device *tdev;
 	struct iphdr  *iph;
 	int    max_headroom;
@@ -165,16 +163,20 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 
 	if (skb_headroom(skb) < max_headroom || skb_cloned(skb) || skb_shared(skb)) {
 		struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
-		if (!new_skb) {
-			ip_rt_put(rt);
+
+		if (!new_skb)
 			goto tx_error;
-		}
+
 		if (skb->sk)
 			skb_set_owner_w(new_skb, skb->sk);
 		consume_skb(skb);
 		skb = new_skb;
 	}
 
+	/* Ensure we can safely access protocol field and LCP code */
+	if (!pskb_may_pull(skb, 3))
+		goto tx_error;
+
 	data = skb->data;
 	islcp = ((data[0] << 8) + data[1]) == PPP_LCP && 1 <= data[2] && data[2] <= 7;
 
@@ -248,6 +250,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	return 1;
 
 tx_error:
+	ip_rt_put(rt);
 	kfree_skb(skb);
 	return 1;
 }
Signature · 1 line
2.39.5
author maintainer
#147 lore raw

PATCH 143/403 ipv6: reject malicious packets in ipv6_gso_segment()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit d45cf1e7d7180256e17c9ce88e32e8061a7887fe ]

syzbot was able to craft a packet with very long IPv6 extension headers leading to an overflow of skb->transport_header.

This 16bit field has a limited range.

Add skb_reset_transport_header_careful() helper and use it from ipv6_gso_segment()

WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
WARNING: CPU: 0 PID: 5871 at ./include/linux/skbuff.h:3032 ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Modules linked in:
CPU: 0 UID: 0 PID: 5871 Comm: syz-executor211 Not tainted 6.16.0-rc6-syzkaller-g7abc678e3084 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
 RIP: 0010:skb_reset_transport_header include/linux/skbuff.h:3032 [inline]
 RIP: 0010:ipv6_gso_segment+0x15e2/0x21e0 net/ipv6/ip6_offload.c:151
Call Trace:
 <TASK>
  skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
  nsh_gso_segment+0x54a/0xe10 net/nsh/nsh.c:110
  skb_mac_gso_segment+0x31c/0x640 net/core/gso.c:53
  __skb_gso_segment+0x342/0x510 net/core/gso.c:124
  skb_gso_segment include/net/gso.h:83 [inline]
  validate_xmit_skb+0x857/0x11b0 net/core/dev.c:3950
  validate_xmit_skb_list+0x84/0x120 net/core/dev.c:4000
  sch_direct_xmit+0xd3/0x4b0 net/sched/sch_generic.c:329
  __dev_xmit_skb net/core/dev.c:4102 [inline]
  __dev_queue_xmit+0x17b6/0x3a70 net/core/dev.c:4679
---
 include/linux/skbuff.h | 23 +++++++++++++++++++++++
 net/ipv6/ip6_offload.c |  4 +++-
 2 files changed, 26 insertions(+), 1 deletion(-)
include/linux/skbuff.h +23 -0
index 4edce28fb454..d9abd9e6833e 100644
@@ -2493,6 +2493,29 @@ static inline void skb_reset_transport_header(struct sk_buff *skb)
 	skb->transport_header = skb->data - skb->head;
 }
 
+/**
+ * skb_reset_transport_header_careful - conditionally reset transport header
+ * @skb: buffer to alter
+ *
+ * Hardened version of skb_reset_transport_header().
+ *
+ * Returns: true if the operation was a success.
+ */
+static inline bool __must_check
+skb_reset_transport_header_careful(struct sk_buff *skb)
+{
+	long offset = skb->data - skb->head;
+
+	if (unlikely(offset != (typeof(skb->transport_header))offset))
+		return false;
+
+	if (unlikely(offset == (typeof(skb->transport_header))~0U))
+		return false;
+
+	skb->transport_header = offset;
+	return true;
+}
+
 static inline void skb_set_transport_header(struct sk_buff *skb,
 					    const int offset)
 {
net/ipv6/ip6_offload.c +3 -1
index b7b4ba68f3a2..0d9d11902b1b 100644
@@ -109,7 +109,9 @@ static struct sk_buff *ipv6_gso_segment(struct sk_buff *skb,
 
 	ops = rcu_dereference(inet6_offloads[proto]);
 	if (likely(ops && ops->callbacks.gso_segment)) {
-		skb_reset_transport_header(skb);
+		if (!skb_reset_transport_header_careful(skb))
+			goto out;
+
 		segs = ops->callbacks.gso_segment(skb, features);
 		if (!segs)
 			skb->network_header = skb_mac_header(skb) + nhoff - skb->head;
Signature · 1 line
2.39.5
author maintainer
#148 lore raw

PATCH 144/403 net: drop UFO packets in udp_rcv_segment()

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Liang <[email protected]>

[ Upstream commit d46e51f1c78b9ab9323610feb14238d06d46d519 ]

When sending a packet with virtio_net_hdr to tun device, if the gso_type in virtio_net_hdr is SKB_GSO_UDP and the gso_size is less than udphdr size, below crash may happen.

  ------------[ cut here ]------------
  kernel BUG at net/core/skbuff.c:4572!
  Oops: invalid opcode: 0000 [#1] SMP NOPTI
  CPU: 0 UID: 0 PID: 62 Comm: mytest Not tainted 6.16.0-rc7 #203 PREEMPT(voluntary)
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
  RIP: 0010:skb_pull_rcsum+0x8e/0xa0
  Code: 00 00 5b c3 cc cc cc cc 8b 93 88 00 00 00 f7 da e8 37 44 38 00 f7 d8 89 83 88 00 00 00 48 8b 83 c8 00 00 00 5b c3 cc cc cc cc <0f> 0b 0f 0b 66 66 2e 0f 1f 84 00 000
  RSP: 0018:ffffc900001fba38 EFLAGS: 00000297
  RAX: 0000000000000004 RBX: ffff8880040c1000 RCX: ffffc900001fb948
  RDX: ffff888003e6d700 RSI: 0000000000000008 RDI: ffff88800411a062
  RBP: ffff8880040c1000 R08: 0000000000000000 R09: 0000000000000001
  R10: ffff888003606c00 R11: 0000000000000001 R12: 0000000000000000
  R13: ffff888004060900 R14: ffff888004050000 R15: ffff888004060900
  FS:  000000002406d3c0(0000) GS:ffff888084a19000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000020000040 CR3: 0000000004007000 CR4: 00000000000006f0
  Call Trace:
   <TASK>
   udp_queue_rcv_one_skb+0x176/0x4b0 net/ipv4/udp.c:2445
   udp_queue_rcv_skb+0x155/0x1f0 net/ipv4/udp.c:2475
   udp_unicast_rcv_skb+0x71/0x90 net/ipv4/udp.c:2626
   __udp4_lib_rcv+0x433/0xb00 net/ipv4/udp.c:2690
   ip_protocol_deliver_rcu+0xa6/0x160 net/ipv4/ip_input.c:205
   ip_local_deliver_finish+0x72/0x90 net/ipv4/ip_input.c:233
   ip_sublist_rcv_finish+0x5f/0x70 net/ipv4/ip_input.c:579
   ip_sublist_rcv+0x122/0x1b0 net/ipv4/ip_input.c:636
   ip_list_rcv+0xf7/0x130 net/ipv4/ip_input.c:670
   __netif_receive_skb_list_core+0x21d/0x240 net/core/dev.c:6067
   netif_receive_skb_list_internal+0x186/0x2b0 net/core/dev.c:6210
   napi_complete_done+0x78/0x180 net/core/dev.c:6580
   tun_get_user+0xa63/0x1120 drivers/net/tun.c:1909
   tun_chr_write_iter+0x65/0xb0 drivers/net/tun.c:1984
   vfs_write+0x300/0x420 fs/read_write.c:593
   ksys_write+0x60/0xd0 fs/read_write.c:686
   do_syscall_64+0x50/0x1c0 arch/x86/entry/syscall_64.c:63
   </TASK>

To trigger gso segment in udp_queue_rcv_skb(), we should also set option UDP_ENCAP_ESPINUDP to enable udp_sk(sk)->encap_rcv. When the encap_rcv hook return 1 in udp_queue_rcv_one_skb(), udp_csum_pull_header() will try to pull udphdr, but the skb size has been segmented to gso size, which leads to this crash.

Previous commit cf329aa42b66 ("udp: cope with UDP GRO packet misdirection") introduces segmentation in UDP receive path only for GRO, which was never intended to be used for UFO, so drop UFO packets in udp_rcv_segment().

---
 include/net/udp.h | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)
include/net/udp.h +18 -6
index 7323f72fed70..bab7b68c5f6d 100644
@@ -471,6 +471,16 @@ static inline struct sk_buff *udp_rcv_segment(struct sock *sk,
 {
 	netdev_features_t features = NETIF_F_SG;
 	struct sk_buff *segs;
+	int drop_count;
+
+	/*
+	 * Segmentation in UDP receive path is only for UDP GRO, drop udp
+	 * fragmentation offload (UFO) packets.
+	 */
+	if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP) {
+		drop_count = 1;
+		goto drop;
+	}
 
 	/* Avoid csum recalculation by skb_segment unless userspace explicitly
 	 * asks for the final checksum values
@@ -494,16 +504,18 @@ static inline struct sk_buff *udp_rcv_segment(struct sock *sk,
 	 */
 	segs = __skb_gso_segment(skb, features, false);
 	if (IS_ERR_OR_NULL(segs)) {
-		int segs_nr = skb_shinfo(skb)->gso_segs;
-
-		atomic_add(segs_nr, &sk->sk_drops);
-		SNMP_ADD_STATS(__UDPX_MIB(sk, ipv4), UDP_MIB_INERRORS, segs_nr);
-		kfree_skb(skb);
-		return NULL;
+		drop_count = skb_shinfo(skb)->gso_segs;
+		goto drop;
 	}
 
 	consume_skb(skb);
 	return segs;
+
+drop:
+	atomic_add(drop_count, &sk->sk_drops);
+	SNMP_ADD_STATS(__UDPX_MIB(sk, ipv4), UDP_MIB_INERRORS, drop_count);
+	kfree_skb(skb);
+	return NULL;
 }
 
 #endif	/* _UDP_H */
Signature · 1 line
2.39.5
author maintainer
#149 lore raw

PATCH 145/403 benet: fix BUG when creating VFs

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Michal Schmidt <[email protected]>

[ Upstream commit 5a40f8af2ba1b9bdf46e2db10e8c9710538fbc63 ]

benet crashes as soon as SRIOV VFs are created:

kernel BUG at mm/vmalloc.c:3457!

 Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
 CPU: 4 UID: 0 PID: 7408 Comm: test.sh Kdump: loaded Not tainted 6.16.0+ #1 PREEMPT(voluntary)
 [...]
 RIP: 0010:vunmap+0x5f/0x70
 [...]
 Call Trace:
  <TASK>
  __iommu_dma_free+0xe8/0x1c0
  be_cmd_set_mac_list+0x3fe/0x640 [be2net]
  be_cmd_set_mac+0xaf/0x110 [be2net]
  be_vf_eth_addr_config+0x19f/0x330 [be2net]
  be_vf_setup+0x4f7/0x990 [be2net]
  be_pci_sriov_configure+0x3a1/0x470 [be2net]
  sriov_numvfs_store+0x20b/0x380
  kernfs_fop_write_iter+0x354/0x530
  vfs_write+0x9b9/0xf60
  ksys_write+0xf3/0x1d0
  do_syscall_64+0x8c/0x3d0

be_cmd_set_mac_list() calls dma_free_coherent() under a spin_lock_bh. Fix it by freeing only after the lock has been released.

Fixes 1a82d19ca2d6 ("be2net: fix sleeping while atomic bugs in be_ndo_bridge_getlink")
---
 drivers/net/ethernet/emulex/benet/be_cmds.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/emulex/benet/be_cmds.c +1 -1
index d9bceb26f4e5..d6984c179bae 100644
@@ -3851,8 +3851,8 @@ int be_cmd_set_mac_list(struct be_adapter *adapter, u8 *mac_array,
 	status = be_mcc_notify_wait(adapter);
 
 err:
-	dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
 	spin_unlock_bh(&adapter->mcc_lock);
+	dma_free_coherent(&adapter->pdev->dev, cmd.size, cmd.va, cmd.dma);
 	return status;
 }
 
Signature · 1 line
2.39.5
author maintainer
#150 lore raw

PATCH 146/403 smb: client: let recv_done() cleanup before notifying the callers.

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Metzmacher <[email protected]>

[ Upstream commit bdd7afc6dca5e0ebbb75583484aa6ea9e03fbb13 ]

We should call put_receive_buffer() before waking up the callers.

For the internal error case of response->type being unexpected, we now also call smbd_disconnect_rdma_connection() instead of not waking up the callers at all.

Note that the SMBD_TRANSFER_DATA case still has problems, which will be addressed in the next commit in order to make it easier to review this one.

Cc Steve French <[email protected]>
Cc Tom Talpey <[email protected]>
Cc Long Li <[email protected]>
Fixes f198186aa9bb ("CIFS: SMBD: Establish SMB Direct connection")
---
 fs/cifs/smbdirect.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
fs/cifs/smbdirect.c +8 -6
index 0842a1af0b98..72df002e8ae3 100644
@@ -495,7 +495,6 @@ static void recv_done(struct ib_cq *cq, struct ib_wc *wc)
 	if (wc->status != IB_WC_SUCCESS || wc->opcode != IB_WC_RECV) {
 		log_rdma_recv(INFO, "wc->status=%d opcode=%d\n",
 			wc->status, wc->opcode);
-		smbd_disconnect_rdma_connection(info);
 		goto error;
 	}
 
@@ -512,8 +511,9 @@ static void recv_done(struct ib_cq *cq, struct ib_wc *wc)
 		info->full_packet_received = true;
 		info->negotiate_done =
 			process_negotiation_response(response, wc->byte_len);
+		put_receive_buffer(info, response);
 		complete(&info->negotiate_completion);
-		break;
+		return;
 
 	/* SMBD data transfer packet */
 	case SMBD_TRANSFER_DATA:
@@ -565,14 +565,16 @@ static void recv_done(struct ib_cq *cq, struct ib_wc *wc)
 
 		queue_work(info->workqueue, &info->recv_done_work);
 		return;
-
-	default:
-		log_rdma_recv(ERR,
-			"unexpected response type=%d\n", response->type);
 	}
 
+	/*
+	 * This is an internal error!
+	 */
+	log_rdma_recv(ERR, "unexpected response type=%d\n", response->type);
+	WARN_ON_ONCE(response->type != SMBD_TRANSFER_DATA);
 error:
 	put_receive_buffer(info, response);
+	smbd_disconnect_rdma_connection(info);
 }
 
 static struct rdma_cm_id *smbd_create_id(
Signature · 1 line
2.39.5
author maintainer
#151 lore raw

PATCH 147/403 pptp: fix pptp_xmit() error path

In reply to Greg Kroah-Hartman

5.4-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Dumazet <[email protected]>

[ Upstream commit ae633388cae349886f1a3cfb27aa092854b24c1b ]

I accidentally added a bug in pptp_xmit() that syzbot caught for us.

Only call ip_rt_put() if a route has been allocated.

BUG: unable to handle page fault for address: ffffffffffffffdb
PGD df3b067 P4D df3b067 PUD df3d067 PMD 0
Oops: Oops: 0002 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 6346 Comm: syz.0.336 Not tainted 6.16.0-next-20250804-syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
RIP: 0010:arch_atomic_add_return arch/x86/include/asm/atomic.h:85 [inline]
RIP: 0010:raw_atomic_sub_return_release include/linux/atomic/atomic-arch-fallback.h:846 [inline]
RIP: 0010:atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:327 [inline]
RIP: 0010:__rcuref_put include/linux/rcuref.h:109 [inline]
RIP: 0010:rcuref_put+0x172/0x210 include/linux/rcuref.h:173
Call Trace:
 <TASK>
 dst_release+0x24/0x1b0 net/core/dst.c:167
 ip_rt_put include/net/route.h:285 [inline]
 pptp_xmit+0x14b/0x1a90 drivers/net/ppp/pptp.c:267
 __ppp_channel_push+0xf2/0x1c0 drivers/net/ppp/ppp_generic.c:2166
 ppp_channel_push+0x123/0x660 drivers/net/ppp/ppp_generic.c:2198
 ppp_write+0x2b0/0x400 drivers/net/ppp/ppp_generic.c:544
 vfs_write+0x27b/0xb30 fs/read_write.c:684
 ksys_write+0x145/0x250 fs/read_write.c:738
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
---
 drivers/net/ppp/pptp.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/net/ppp/pptp.c +4 -3
index 5e2f4702aa2b..83541444bc8c 100644
@@ -141,13 +141,13 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 	int len;
 	unsigned char *data;
 	__u32 seq_recv;
-	struct rtable *rt = NULL;
+	struct rtable *rt;
 	struct net_device *tdev;
 	struct iphdr  *iph;
 	int    max_headroom;
 
 	if (sk_pppox(po)->sk_state & PPPOX_DEAD)
-		goto tx_error;
+		goto tx_drop;
 
 	rt = ip_route_output_ports(net, &fl4, NULL,
 				   opt->dst_addr.sin_addr.s_addr,
@@ -155,7 +155,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 				   0, 0, IPPROTO_GRE,
 				   RT_TOS(0), 0);
 	if (IS_ERR(rt))
-		goto tx_error;
+		goto tx_drop;
 
 	tdev = rt->dst.dev;
 
@@ -251,6 +251,7 @@ static int pptp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
 
 tx_error:
 	ip_rt_put(rt);
+tx_drop:
 	kfree_skb(skb);
 	return 1;
 }
Signature · 1 line
2.39.5