Skip to contentSkip to conversation

bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

PATCH Superseded Leon Hwang 2 participants 18 messages Aug 27, 2025 – Sep 4, 2025

Subsystems (5)
Kselftest BPF BPF selftests BPF core +1 more subsystems

v4 of 13 Superseded Latest is v13 →

lore
Share & tools
lore

Leon Hwang

author
#0 lore raw

v4 cover bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

This patch set introduces the BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps, as the requirement of BPF_F_ALL_CPUS flag for percpu_array maps was discussed in the thread of
"[PATCH bpf-next v3 0/4] bpf: Introduce global percpu data"[1].

The goal of BPF_F_ALL_CPUS flag is to reduce data caching overhead in light skeletons by allowing a single value to be reused to update values across all CPUs. This avoids the M:N problem where M cached values are used to update a map on N CPUs kernel.

The BPF_F_CPU flag is accompanied by *flags*-embedded cpu info, which specifies the target CPU for the operation:

* For lookup operations: the flag field alongside cpu info enable querying a value on the specified CPU.
* For update operations: the flag field alongside cpu info enable updating value for specified CPU.

Links:
[1] https://lore.kernel.org/bpf/[email protected]/

Changes:
v3 -> v4:
* Address comments from Andrii:
* Remove unnecessary map_type check in bpf_map_value_size().
* Reduce code churn.
* Remove unnecessary do_delete check in

    __htab_map_lookup_and_delete_batch().
  * Introduce bpf_percpu_copy_to_user() and bpf_percpu_copy_from_user().
  * Rename check_map_flags() to bpf_map_check_op_flags() with
    extra_flags_mask.
  * Add human-readable pr_warn() explanations in validate_map_op().
  * Use flags in bpf_map__delete_elem() and
    bpf_map__lookup_and_delete_elem().

* Drop "for alignment reasons".
v3 link: https://lore.kernel.org/bpf/[email protected]/

v2 -> v3:
* Address comments from Alexei:
* Use BPF_F_ALL_CPUS instead of BPF_ALL_CPUS magic.
* Introduce these two cpu flags for all percpu maps.
* Address comments from Jiri:
* Reduce some unnecessary u32 cast.
* Refactor more generic map flags check function.
* A code style issue.
v2 link: https://lore.kernel.org/bpf/[email protected]/

v1 -> v2:
* Address comments from Andrii:
* Embed cpu info as high 32 bits of *flags* totally.
* Use ERANGE instead of E2BIG.
* Few format issues.

RFC v2 -> v1:
* Address comments from Andrii:
* Use '&=' and '|='.
* Replace 'reuse_value' with simpler and less duplication code.
* Replace 'ASSERT_FALSE' with two 'ASSERT_OK_PTR's in self test.

RFC v1 -> RFC v2:
* Address comments from Andrii:
* Embed cpu to flags on kernel side.
* Change BPF_ALL_CPU macro to BPF_ALL_CPUS enum.
* Copy/update element within RCU protection.
* Update bpf_map_value_size() including BPF_F_CPU case.
* Use zero as default value to get cpu option.
* Update documents of APIs to be generic.
* Add size_t:0 to opts definitions.
* Update validate_map_op() including BPF_F_CPU case.
* Use LIBBPF_OPTS instead of DECLARE_LIBBPF_OPTS.

Leon Hwang (7):
bpf: Introduce internal bpf_map_check_op_flags helper function
bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags
bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu_array
maps
bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu_hash and
lru_percpu_hash maps
bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for
percpu_cgroup_storage maps
libbpf: Support BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps selftests/bpf: Add cases to test BPF_F_CPU and BPF_F_ALL_CPUS flags

 include/linux/bpf-cgroup.h                    |   5 +-
 include/linux/bpf.h                           | 126 +++++++++-
 include/uapi/linux/bpf.h                      |   2 +
 kernel/bpf/arraymap.c                         |  28 +--
 kernel/bpf/hashtab.c                          |  95 +++++---
 kernel/bpf/local_storage.c                    |  42 ++--
 kernel/bpf/syscall.c                          |  64 +++--
 tools/include/uapi/linux/bpf.h                |   2 +
 tools/lib/bpf/bpf.h                           |   8 +
 tools/lib/bpf/libbpf.c                        |  33 ++-
 tools/lib/bpf/libbpf.h                        |  21 +-
 .../selftests/bpf/prog_tests/percpu_alloc.c   | 224 ++++++++++++++++++
 .../selftests/bpf/progs/percpu_alloc_array.c  |  32 +++
 13 files changed, 549 insertions(+), 133 deletions(-)

--
2.50.1

author
#1 lore raw

PATCH v4 1/7 bpf: Introduce internal bpf_map_check_op_flags helper function

It is to unify map flags checking for lookup_elem, update_elem, lookup_batch and update_batch APIs.

Therefore, it will be convenient to check BPF_F_CPU and BPF_F_ALL_CPUS flags in it for these APIs in next patch.

---
 include/linux/bpf.h  | 28 ++++++++++++++++++++++++++++
 kernel/bpf/syscall.c | 34 +++++++++++-----------------------
 2 files changed, 39 insertions(+), 23 deletions(-)
include/linux/bpf.h +28 -0
index 8f6e87f0f3a89..512717d442c09 100644
@@ -3709,4 +3709,32 @@ int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char *
 			   const char **linep, int *nump);
 struct bpf_prog *bpf_prog_find_from_stack(void);
 
+static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 extra_flags_mask)
+{
+	if (extra_flags_mask && (flags & extra_flags_mask))
+		return -EINVAL;
+
+	if ((flags & BPF_F_LOCK) && !btf_record_has_field(map->record, BPF_SPIN_LOCK))
+		return -EINVAL;
+
+	return 0;
+}
+
+static inline int bpf_map_check_update_flags(struct bpf_map *map, u64 flags)
+{
+	return bpf_map_check_op_flags(map, flags, 0);
+}
+
+#define BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK (~BPF_F_LOCK)
+
+static inline int bpf_map_check_lookup_flags(struct bpf_map *map, u64 flags)
+{
+	return bpf_map_check_op_flags(map, flags, BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK);
+}
+
+static inline int bpf_map_check_batch_flags(struct bpf_map *map, u64 flags)
+{
+	return bpf_map_check_op_flags(map, flags, BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK);
+}
+
 #endif /* _LINUX_BPF_H */
kernel/bpf/syscall.c +11 -23
index 0fbfa8532c392..4e04b35944a2b 100644
@@ -1669,9 +1669,6 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (CHECK_ATTR(BPF_MAP_LOOKUP_ELEM))
 		return -EINVAL;
 
-	if (attr->flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
 	CLASS(fd, f)(attr->map_fd);
 	map = __bpf_map_get(f);
 	if (IS_ERR(map))
@@ -1679,9 +1676,9 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (!(map_get_sys_perms(map, f) & FMODE_CAN_READ))
 		return -EPERM;
 
-	if ((attr->flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK))
-		return -EINVAL;
+	err = bpf_map_check_lookup_flags(map, attr->flags);
+	if (err)
+		return err;
 
 	key = __bpf_copy_key(ukey, map->key_size);
 	if (IS_ERR(key))
@@ -1744,11 +1741,9 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
 		goto err_put;
 	}
 
-	if ((attr->flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK)) {
-		err = -EINVAL;
+	err = bpf_map_check_update_flags(map, attr->flags);
+	if (err)
 		goto err_put;
-	}
 
 	key = ___bpf_copy_key(ukey, map->key_size);
 	if (IS_ERR(key)) {
@@ -1952,13 +1947,9 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
 	void *key, *value;
 	int err = 0;
 
-	if (attr->batch.elem_flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
-	if ((attr->batch.elem_flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK)) {
-		return -EINVAL;
-	}
+	err = bpf_map_check_batch_flags(map, attr->batch.elem_flags);
+	if (err)
+		return err;
 
 	value_size = bpf_map_value_size(map);
 
@@ -2015,12 +2006,9 @@ int generic_map_lookup_batch(struct bpf_map *map,
 	u32 value_size, cp, max_count;
 	int err;
 
-	if (attr->batch.elem_flags & ~BPF_F_LOCK)
-		return -EINVAL;
-
-	if ((attr->batch.elem_flags & BPF_F_LOCK) &&
-	    !btf_record_has_field(map->record, BPF_SPIN_LOCK))
-		return -EINVAL;
+	err = bpf_map_check_batch_flags(map, attr->batch.elem_flags);
+	if (err)
+		return err;
 
 	value_size = bpf_map_value_size(map);
 
Signature · 1 line
2.50.1
#2 lore raw

Re: [PATCH bpf-next v4 1/7] bpf: Introduce internal bpf_map_check_op_flags helper function

Quoted 18 lines · Leon Hwang

It is to unify map flags checking for lookup_elem, update_elem, lookup_batch and update_batch APIs.

Therefore, it will be convenient to check BPF_F_CPU and BPF_F_ALL_CPUS flags in it for these APIs in next patch.

---
 include/linux/bpf.h  | 28 ++++++++++++++++++++++++++++
 kernel/bpf/syscall.c | 34 +++++++++++-----------------------
 2 files changed, 39 insertions(+), 23 deletions(-)
include/linux/bpf.h +0 -0
index 8f6e87f0f3a89..512717d442c09 100644

include/linux/bpf.h int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char * · line 3714

Quoted 6 lines
include/linux/bpf.h +3 -0
@@ -3709,4 +3709,32 @@ int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char *
                           const char **linep, int *nump);
 struct bpf_prog *bpf_prog_find_from_stack(void);
 
+static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 extra_flags_mask)
+{
+       if (extra_flags_mask && (flags & extra_flags_mask))

doh, Leon... when extra_flags_mask == 0, flags & extra_flags_mask is always false, so just:

if (flags & extra_flags_mask)

    return -EINVAL;

But it feels more natural to reverse the meaning of this and treat it as extra *allowed flags*. So zero would mean no extra flags should be there (most strict case) and ~0 would mean "we don't care or will check later". And so in the code you'd have

if (flags & ~extra_flags) /* check for any unsupported flags */

    return -EINVAL;

But I need someone else to do a reality check on me here at this point.

Quoted 26 lines
include/linux/bpf.h +25 -0
+               return -EINVAL;
+
+       if ((flags & BPF_F_LOCK) && !btf_record_has_field(map->record, BPF_SPIN_LOCK))
+               return -EINVAL;
+
+       return 0;
+}
+
+static inline int bpf_map_check_update_flags(struct bpf_map *map, u64 flags)
+{
+       return bpf_map_check_op_flags(map, flags, 0);
+}
+
+#define BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK (~BPF_F_LOCK)
+
+static inline int bpf_map_check_lookup_flags(struct bpf_map *map, u64 flags)
+{
+       return bpf_map_check_op_flags(map, flags, BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK);
+}
+
+static inline int bpf_map_check_batch_flags(struct bpf_map *map, u64 flags)
+{
+       return bpf_map_check_op_flags(map, flags, BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK);
+}
+
 #endif /* _LINUX_BPF_H */

[...]

author
#3 lore raw

Re: [PATCH bpf-next v4 1/7] bpf: Introduce internal bpf_map_check_op_flags helper function

Quoted 37 lines · Andrii Nakryiko
Quoted 18 lines · Leon Hwang

It is to unify map flags checking for lookup_elem, update_elem, lookup_batch and update_batch APIs.

Therefore, it will be convenient to check BPF_F_CPU and BPF_F_ALL_CPUS flags in it for these APIs in next patch.

---
 include/linux/bpf.h  | 28 ++++++++++++++++++++++++++++
 kernel/bpf/syscall.c | 34 +++++++++++-----------------------
 2 files changed, 39 insertions(+), 23 deletions(-)
include/linux/bpf.h +0 -0
index 8f6e87f0f3a89..512717d442c09 100644

include/linux/bpf.h int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char * · line 3714

Quoted 6 lines
include/linux/bpf.h +3 -0
@@ -3709,4 +3709,32 @@ int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char *
                           const char **linep, int *nump);
 struct bpf_prog *bpf_prog_find_from_stack(void);
 
+static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 extra_flags_mask)
+{
+       if (extra_flags_mask && (flags & extra_flags_mask))

doh, Leon... when extra_flags_mask == 0, flags & extra_flags_mask is always false, so just:

if (flags & extra_flags_mask)

    return -EINVAL;

But it feels more natural to reverse the meaning of this and treat it as extra *allowed flags*. So zero would mean no extra flags should be there (most strict case) and ~0 would mean "we don't care or will check later". And so in the code you'd have

Quoted 5 lines

if (flags & ~extra_flags) /* check for any unsupported flags */

    return -EINVAL;

But I need someone else to do a reality check on me here at this point.

It seems clearer to handle this as additional *allowed flags*. That would make it more understandable.

Thanks,
Leon

author
#4 lore raw

PATCH v4 2/7 bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags

In reply to Leon Hwang

Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and the following internal helper functions for percpu maps:

* bpf_percpu_copy_to_user: For lookup_elem and lookup_batch user APIs, copy data to user-provided value pointer.
* bpf_percpu_copy_from_user: For update_elem and update_batch user APIs, copy data from user-provided value pointer.
* bpf_map_check_cpu_flags: Check BPF_F_CPU, BPF_F_ALL_CPUS and cpu info in flags.

And, get the correct value size for these user APIs.

---
 include/linux/bpf.h            | 89 ++++++++++++++++++++++++++++++++--
 include/uapi/linux/bpf.h       |  2 +
 kernel/bpf/syscall.c           | 24 ++++-----
 tools/include/uapi/linux/bpf.h |  2 +
 4 files changed, 103 insertions(+), 14 deletions(-)
include/linux/bpf.h +86 -3
index 512717d442c09..a83364949b64c 100644
@@ -547,6 +547,56 @@ static inline void copy_map_value_long(struct bpf_map *map, void *dst, void *src
 	bpf_obj_memcpy(map->record, dst, src, map->value_size, true);
 }
 
+#ifdef CONFIG_BPF_SYSCALL
+static inline void bpf_percpu_copy_to_user(struct bpf_map *map, void __percpu *pptr, void *value,
+					   u32 size, u64 flags)
+{
+	int current_cpu = raw_smp_processor_id();
+	int cpu, off = 0;
+
+	if (flags & BPF_F_CPU) {
+		cpu = flags >> 32;
+		copy_map_value_long(map, value, cpu != current_cpu ? per_cpu_ptr(pptr, cpu) :
+				    this_cpu_ptr(pptr));
+		check_and_init_map_value(map, value);
+	} else {
+		for_each_possible_cpu(cpu) {
+			copy_map_value_long(map, value + off, per_cpu_ptr(pptr, cpu));
+			check_and_init_map_value(map, value + off);
+			off += size;
+		}
+	}
+}
+
+void bpf_obj_free_fields(const struct btf_record *rec, void *obj);
+
+static inline void bpf_percpu_copy_from_user(struct bpf_map *map, void __percpu *pptr, void *value,
+					     u32 size, u64 flags)
+{
+	int current_cpu = raw_smp_processor_id();
+	int cpu, off = 0;
+	void *ptr;
+
+	if (flags & BPF_F_CPU) {
+		cpu = flags >> 32;
+		ptr = cpu == current_cpu ? this_cpu_ptr(pptr) : per_cpu_ptr(pptr, cpu);
+		copy_map_value_long(map, ptr, value);
+		bpf_obj_free_fields(map->record, ptr);
+	} else {
+		for_each_possible_cpu(cpu) {
+			copy_map_value_long(map, per_cpu_ptr(pptr, cpu), value + off);
+			/* same user-provided value is used if
+			 * BPF_F_ALL_CPUS is specified, otherwise value is
+			 * an array of per-cpu values.
+			 */
+			if (!(flags & BPF_F_ALL_CPUS))
+				off += size;
+			bpf_obj_free_fields(map->record, per_cpu_ptr(pptr, cpu));
+		}
+	}
+}
+#endif
+
 static inline void bpf_obj_swap_uptrs(const struct btf_record *rec, void *dst, void *src)
 {
 	unsigned long *src_uptr, *dst_uptr;
@@ -2417,7 +2467,6 @@ struct btf_record *btf_record_dup(const struct btf_record *rec);
 bool btf_record_equal(const struct btf_record *rec_a, const struct btf_record *rec_b);
 void bpf_obj_free_timer(const struct btf_record *rec, void *obj);
 void bpf_obj_free_workqueue(const struct btf_record *rec, void *obj);
-void bpf_obj_free_fields(const struct btf_record *rec, void *obj);
 void __bpf_obj_drop_impl(void *p, const struct btf_record *rec, bool percpu);
 
 struct bpf_map *bpf_map_get(u32 ufd);
@@ -3709,14 +3758,25 @@ int bpf_prog_get_file_line(struct bpf_prog *prog, unsigned long ip, const char *
 			   const char **linep, int *nump);
 struct bpf_prog *bpf_prog_find_from_stack(void);
 
+static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
+{
+	return false;
+}
+
 static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 extra_flags_mask)
 {
-	if (extra_flags_mask && (flags & extra_flags_mask))
+	if (extra_flags_mask && ((u32)flags & extra_flags_mask))
 		return -EINVAL;
 
 	if ((flags & BPF_F_LOCK) && !btf_record_has_field(map->record, BPF_SPIN_LOCK))
 		return -EINVAL;
 
+	if (!(flags & BPF_F_CPU) && flags >> 32)
+		return -EINVAL;
+
+	if ((flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) && !bpf_map_supports_cpu_flags(map->map_type))
+		return -EINVAL;
+
 	return 0;
 }
 
@@ -3725,7 +3785,7 @@ static inline int bpf_map_check_update_flags(struct bpf_map *map, u64 flags)
 	return bpf_map_check_op_flags(map, flags, 0);
 }
 
-#define BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK (~BPF_F_LOCK)
+#define BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK (~(BPF_F_LOCK | BPF_F_CPU | BPF_F_ALL_CPUS))
 
 static inline int bpf_map_check_lookup_flags(struct bpf_map *map, u64 flags)
 {
@@ -3737,4 +3797,27 @@ static inline int bpf_map_check_batch_flags(struct bpf_map *map, u64 flags)
 	return bpf_map_check_op_flags(map, flags, BPF_MAP_LOOKUP_ELEM_EXTRA_FLAGS_MASK);
 }
 
+static inline int bpf_map_check_cpu_flags(u64 flags, bool check_all_cpus_flag)
+{
+	const u64 cpu_flags = BPF_F_CPU | BPF_F_ALL_CPUS;
+	u32 cpu;
+
+	if (check_all_cpus_flag) {
+		if (unlikely((u32)flags > BPF_F_ALL_CPUS))
+			/* unknown flags */
+			return -EINVAL;
+		if (unlikely((flags & cpu_flags) == cpu_flags))
+			return -EINVAL;
+	} else {
+		if (unlikely((u32)flags & ~BPF_F_CPU))
+			return -EINVAL;
+	}
+
+	cpu = flags >> 32;
+	if (unlikely((flags & BPF_F_CPU) && cpu >= num_possible_cpus()))
+		return -ERANGE;
+
+	return 0;
+}
+
 #endif /* _LINUX_BPF_H */
include/uapi/linux/bpf.h +2 -0
index 233de8677382e..be1fdc5042744 100644
@@ -1372,6 +1372,8 @@ enum {
 	BPF_NOEXIST	= 1, /* create new element if it didn't exist */
 	BPF_EXIST	= 2, /* update existing element */
 	BPF_F_LOCK	= 4, /* spin_lock-ed map_lookup/map_update */
+	BPF_F_CPU	= 8, /* cpu flag for percpu maps, upper 32-bit of flags is a cpu number */
+	BPF_F_ALL_CPUS	= 16, /* update value across all CPUs for percpu maps */
 };
 
 /* flags for BPF_MAP_CREATE command */
kernel/bpf/syscall.c +13 -11
index 4e04b35944a2b..dbd21484d7a4d 100644
@@ -131,12 +131,14 @@ bool bpf_map_write_active(const struct bpf_map *map)
 	return atomic64_read(&map->writecnt) != 0;
 }
 
-static u32 bpf_map_value_size(const struct bpf_map *map)
-{
-	if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
-	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH ||
-	    map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY ||
-	    map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE)
+static u32 bpf_map_value_size(const struct bpf_map *map, u64 flags)
+{
+	if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS))
+		return round_up(map->value_size, 8);
+	else if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
+		 map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH ||
+		 map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY ||
+		 map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE)
 		return round_up(map->value_size, 8) * num_possible_cpus();
 	else if (IS_FD_MAP(map))
 		return sizeof(u32);
@@ -1684,7 +1686,7 @@ static int map_lookup_elem(union bpf_attr *attr)
 	if (IS_ERR(key))
 		return PTR_ERR(key);
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->flags);
 
 	err = -ENOMEM;
 	value = kvmalloc(value_size, GFP_USER | __GFP_NOWARN);
@@ -1751,7 +1753,7 @@ static int map_update_elem(union bpf_attr *attr, bpfptr_t uattr)
 		goto err_put;
 	}
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->flags);
 	value = kvmemdup_bpfptr(uvalue, value_size);
 	if (IS_ERR(value)) {
 		err = PTR_ERR(value);
@@ -1951,7 +1953,7 @@ int generic_map_update_batch(struct bpf_map *map, struct file *map_file,
 	if (err)
 		return err;
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->batch.elem_flags);
 
 	max_count = attr->batch.count;
 	if (!max_count)
@@ -2010,7 +2012,7 @@ int generic_map_lookup_batch(struct bpf_map *map,
 	if (err)
 		return err;
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, attr->batch.elem_flags);
 
 	max_count = attr->batch.count;
 	if (!max_count)
@@ -2132,7 +2134,7 @@ static int map_lookup_and_delete_elem(union bpf_attr *attr)
 		goto err_put;
 	}
 
-	value_size = bpf_map_value_size(map);
+	value_size = bpf_map_value_size(map, 0);
 
 	err = -ENOMEM;
 	value = kvmalloc(value_size, GFP_USER | __GFP_NOWARN);
tools/include/uapi/linux/bpf.h +2 -0
index 233de8677382e..be1fdc5042744 100644
@@ -1372,6 +1372,8 @@ enum {
 	BPF_NOEXIST	= 1, /* create new element if it didn't exist */
 	BPF_EXIST	= 2, /* update existing element */
 	BPF_F_LOCK	= 4, /* spin_lock-ed map_lookup/map_update */
+	BPF_F_CPU	= 8, /* cpu flag for percpu maps, upper 32-bit of flags is a cpu number */
+	BPF_F_ALL_CPUS	= 16, /* update value across all CPUs for percpu maps */
 };
 
 /* flags for BPF_MAP_CREATE command */
Signature · 1 line
2.50.1
#5 lore raw

Re: [PATCH bpf-next v4 2/7] bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags

Quoted 31 lines · Leon Hwang

Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags and the following internal helper functions for percpu maps:

* bpf_percpu_copy_to_user: For lookup_elem and lookup_batch user APIs, copy data to user-provided value pointer.
* bpf_percpu_copy_from_user: For update_elem and update_batch user APIs, copy data from user-provided value pointer.
* bpf_map_check_cpu_flags: Check BPF_F_CPU, BPF_F_ALL_CPUS and cpu info in flags.

And, get the correct value size for these user APIs.

---
 include/linux/bpf.h            | 89 ++++++++++++++++++++++++++++++++--
 include/uapi/linux/bpf.h       |  2 +
 kernel/bpf/syscall.c           | 24 ++++-----
 tools/include/uapi/linux/bpf.h |  2 +
 4 files changed, 103 insertions(+), 14 deletions(-)
include/linux/bpf.h +2 -0
index 512717d442c09..a83364949b64c 100644
@@ -547,6 +547,56 @@ static inline void copy_map_value_long(struct bpf_map *map, void *dst, void *src
        bpf_obj_memcpy(map->record, dst, src, map->value_size, true);
 }
 
+#ifdef CONFIG_BPF_SYSCALL
+static inline void bpf_percpu_copy_to_user(struct bpf_map *map, void __percpu *pptr, void *value,

include/linux/bpf.h static inline void copy_map_value_long(struct bpf_map *map, void *dst, void *src · line 561

Quoted 10 lines
include/linux/bpf.h +10 -0
+                                          u32 size, u64 flags)
+{
+       int current_cpu = raw_smp_processor_id();
+       int cpu, off = 0;
+
+       if (flags & BPF_F_CPU) {
+               cpu = flags >> 32;
+               copy_map_value_long(map, value, cpu != current_cpu ? per_cpu_ptr(pptr, cpu) :
+                                   this_cpu_ptr(pptr));
+               check_and_init_map_value(map, value);

I'm not sure it's the question to you, but why would we "check_and_init_map_value" when copying data to user space?... this is so confusing...

Quoted 27 lines
include/linux/bpf.h +27 -0
+       } else {
+               for_each_possible_cpu(cpu) {
+                       copy_map_value_long(map, value + off, per_cpu_ptr(pptr, cpu));
+                       check_and_init_map_value(map, value + off);
+                       off += size;
+               }
+       }
+}
+
+void bpf_obj_free_fields(const struct btf_record *rec, void *obj);
+
+static inline void bpf_percpu_copy_from_user(struct bpf_map *map, void __percpu *pptr, void *value,
+                                            u32 size, u64 flags)
+{
+       int current_cpu = raw_smp_processor_id();
+       int cpu, off = 0;
+       void *ptr;
+
+       if (flags & BPF_F_CPU) {
+               cpu = flags >> 32;
+               ptr = cpu == current_cpu ? this_cpu_ptr(pptr) : per_cpu_ptr(pptr, cpu);
+               copy_map_value_long(map, ptr, value);
+               bpf_obj_free_fields(map->record, ptr);
+       } else {
+               for_each_possible_cpu(cpu) {
+                       copy_map_value_long(map, per_cpu_ptr(pptr, cpu), value + off);
+                       /* same user-provided value is used if

include/linux/bpf.h static inline void copy_map_value_long(struct bpf_map *map, void *dst, void *src · line 598

Quoted 10 lines
include/linux/bpf.h +10 -0
+                        * BPF_F_ALL_CPUS is specified, otherwise value is
+                        * an array of per-cpu values.
+                        */
+                       if (!(flags & BPF_F_ALL_CPUS))
+                               off += size;
+                       bpf_obj_free_fields(map->record, per_cpu_ptr(pptr, cpu));
+               }
+       }
+}
+#endif

hm... these helpers are just here with no way to validate that they generalize existing logic correctly... Do a separate patch where you introduce this helper before adding per-CPU flags *and* make use of them in existing code? Then we can check that you didn't introduce any subtle differences? Then in this patch you can adjust helpers to handle BPF_F_CPU and BPF_F_ALL_CPUS?

pw-bot: cr

[...]

author
#6 lore raw

Re: [PATCH bpf-next v4 2/7] bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags

Quoted 2 lines · Andrii Nakryiko
Quoted 1 line · Leon Hwang

[...]

Quoted 18 lines

include/linux/bpf.h static inline void copy_map_value_long(struct bpf_map *map, void *dst, void *src · line 561

Quoted 13 lines
include/linux/bpf.h +12 -0
+#ifdef CONFIG_BPF_SYSCALL
+static inline void bpf_percpu_copy_to_user(struct bpf_map *map, void __percpu *pptr, void *value,
+                                          u32 size, u64 flags)
+{
+       int current_cpu = raw_smp_processor_id();
+       int cpu, off = 0;
+
+       if (flags & BPF_F_CPU) {
+               cpu = flags >> 32;
+               copy_map_value_long(map, value, cpu != current_cpu ? per_cpu_ptr(pptr, cpu) :
+                                   this_cpu_ptr(pptr));
+               check_and_init_map_value(map, value);

I'm not sure it's the question to you, but why would we "check_and_init_map_value" when copying data to user space?... this is so confusing...

After reading its code, I think it's to hide some kernel details from user space, e.g. refcount, list nodes, rb nodes.

Quoted 14 lines
Quoted 14 lines
include/linux/bpf.h +14 -0
+       } else {
+               for_each_possible_cpu(cpu) {
+                       copy_map_value_long(map, value + off, per_cpu_ptr(pptr, cpu));
+                       check_and_init_map_value(map, value + off);
+                       off += size;
+               }
+       }
+}
+
+void bpf_obj_free_fields(const struct btf_record *rec, void *obj);
+
+static inline void bpf_percpu_copy_from_user(struct bpf_map *map, void __percpu *pptr, void *value,
+                                            u32 size, u64 flags)
+{

[...]

Quoted 10 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+}
+#endif

hm... these helpers are just here with no way to validate that they generalize existing logic correctly... Do a separate patch where you introduce this helper before adding per-CPU flags *and* make use of them in existing code? Then we can check that you didn't introduce any subtle differences? Then in this patch you can adjust helpers to handle BPF_F_CPU and BPF_F_ALL_CPUS?

Get it.

I'll send a separate patch later.

Thanks,
Leon

#7 lore raw

Re: [PATCH bpf-next v4 2/7] bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags

Quoted 26 lines · Leon Hwang
Quoted 2 lines · Andrii Nakryiko
Quoted 1 line · Leon Hwang

[...]

Quoted 18 lines

include/linux/bpf.h static inline void copy_map_value_long(struct bpf_map *map, void *dst, void *src · line 561

Quoted 13 lines
include/linux/bpf.h +12 -0
+#ifdef CONFIG_BPF_SYSCALL
+static inline void bpf_percpu_copy_to_user(struct bpf_map *map, void __percpu *pptr, void *value,
+                                          u32 size, u64 flags)
+{
+       int current_cpu = raw_smp_processor_id();
+       int cpu, off = 0;
+
+       if (flags & BPF_F_CPU) {
+               cpu = flags >> 32;
+               copy_map_value_long(map, value, cpu != current_cpu ? per_cpu_ptr(pptr, cpu) :
+                                   this_cpu_ptr(pptr));
+               check_and_init_map_value(map, value);

I'm not sure it's the question to you, but why would we "check_and_init_map_value" when copying data to user space?... this is so confusing...

Quoted 2 lines

After reading its code, I think it's to hide some kernel details from user space, e.g. refcount, list nodes, rb nodes.

we don't copy those details, so there is nothing to hide, so no, I think it's just weird that we do this, unless there is some non-obvious reasoning behind this

Quoted 29 lines
Quoted 15 lines
Quoted 15 lines
include/linux/bpf.h +14 -0
+       } else {
+               for_each_possible_cpu(cpu) {
+                       copy_map_value_long(map, value + off, per_cpu_ptr(pptr, cpu));
+                       check_and_init_map_value(map, value + off);
+                       off += size;
+               }
+       }
+}
+
+void bpf_obj_free_fields(const struct btf_record *rec, void *obj);
+
+static inline void bpf_percpu_copy_from_user(struct bpf_map *map, void __percpu *pptr, void *value,
+                                            u32 size, u64 flags)
+{

[...]

Quoted 10 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+}
+#endif

hm... these helpers are just here with no way to validate that they generalize existing logic correctly... Do a separate patch where you introduce this helper before adding per-CPU flags *and* make use of them in existing code? Then we can check that you didn't introduce any subtle differences? Then in this patch you can adjust helpers to handle BPF_F_CPU and BPF_F_ALL_CPUS?

Quoted 3 lines

Get it.

I'll send a separate patch later.

separate patch as part of the patch set to show the value of this refactoring :)

Quoted 3 lines

Thanks,
Leon

author
#8 lore raw

Re: [PATCH bpf-next v4 2/7] bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags

Quoted 27 lines · Andrii Nakryiko
Quoted 26 lines · Leon Hwang
Quoted 2 lines · Andrii Nakryiko
Quoted 1 line · Leon Hwang

[...]

Quoted 18 lines

include/linux/bpf.h static inline void copy_map_value_long(struct bpf_map *map, void *dst, void *src · line 561

Quoted 13 lines
include/linux/bpf.h +12 -0
+#ifdef CONFIG_BPF_SYSCALL
+static inline void bpf_percpu_copy_to_user(struct bpf_map *map, void __percpu *pptr, void *value,
+                                          u32 size, u64 flags)
+{
+       int current_cpu = raw_smp_processor_id();
+       int cpu, off = 0;
+
+       if (flags & BPF_F_CPU) {
+               cpu = flags >> 32;
+               copy_map_value_long(map, value, cpu != current_cpu ? per_cpu_ptr(pptr, cpu) :
+                                   this_cpu_ptr(pptr));
+               check_and_init_map_value(map, value);

I'm not sure it's the question to you, but why would we "check_and_init_map_value" when copying data to user space?... this is so confusing...

Quoted 7 lines
Quoted 2 lines

After reading its code, I think it's to hide some kernel details from user space, e.g. refcount, list nodes, rb nodes.

we don't copy those details, so there is nothing to hide, so no, I think it's just weird that we do this, unless there is some non-obvious reasoning behind this

Ack.

check_and_init_map_value() is useless here.

Quoted 29 lines
Quoted 29 lines
Quoted 15 lines
Quoted 15 lines
include/linux/bpf.h +14 -0
+       } else {
+               for_each_possible_cpu(cpu) {
+                       copy_map_value_long(map, value + off, per_cpu_ptr(pptr, cpu));
+                       check_and_init_map_value(map, value + off);
+                       off += size;
+               }
+       }
+}
+
+void bpf_obj_free_fields(const struct btf_record *rec, void *obj);
+
+static inline void bpf_percpu_copy_from_user(struct bpf_map *map, void __percpu *pptr, void *value,
+                                            u32 size, u64 flags)
+{

[...]

Quoted 10 lines

Review

Quoted 2 lines
(quoted diff) +2 -0
+}
+#endif

hm... these helpers are just here with no way to validate that they generalize existing logic correctly... Do a separate patch where you introduce this helper before adding per-CPU flags *and* make use of them in existing code? Then we can check that you didn't introduce any subtle differences? Then in this patch you can adjust helpers to handle BPF_F_CPU and BPF_F_ALL_CPUS?

Quoted 6 lines
Quoted 3 lines

Get it.

I'll send a separate patch later.

separate patch as part of the patch set to show the value of this refactoring :)

Sorry for my misunderstanding. :/

Thanks,
Leon

author
#9 lore raw

PATCH v4 3/7 bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu_array maps

In reply to Leon Hwang

Introduce support for the BPF_F_ALL_CPUS flag in percpu_array maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce support for the BPF_F_CPU flag in percpu_array maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags of lookup_elem and update_elem APIs along with embedded cpu info.
* elem_flags of lookup_batch and update_batch APIs along with embedded cpu info.

---
 include/linux/bpf.h   | 10 ++++++++--
 kernel/bpf/arraymap.c | 28 ++++++++++++----------------
 kernel/bpf/syscall.c  |  2 +-
 3 files changed, 21 insertions(+), 19 deletions(-)
include/linux/bpf.h +8 -2
index a83364949b64c..bc44b72129e59 100644
@@ -2746,7 +2746,8 @@ int map_set_for_each_callback_args(struct bpf_verifier_env *env,
 				   struct bpf_func_state *callee);
 
 int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value);
-int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value,
+			  u64 flags);
 int bpf_percpu_hash_update(struct bpf_map *map, void *key, void *value,
 			   u64 flags);
 int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
@@ -3760,7 +3761,12 @@ struct bpf_prog *bpf_prog_find_from_stack(void);
 
 static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 {
-	return false;
+	switch (map_type) {
+	case BPF_MAP_TYPE_PERCPU_ARRAY:
+		return true;
+	default:
+		return false;
+	}
 }
 
 static inline int bpf_map_check_op_flags(struct bpf_map *map, u64 flags, u64 extra_flags_mask)
kernel/bpf/arraymap.c +12 -16
index 3d080916faf97..42a75fbc588a1 100644
@@ -295,17 +295,21 @@ static void *percpu_array_map_lookup_percpu_elem(struct bpf_map *map, void *key,
 	return per_cpu_ptr(array->pptrs[index & array->index_mask], cpu);
 }
 
-int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value)
+int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value, u64 flags)
 {
 	struct bpf_array *array = container_of(map, struct bpf_array, map);
 	u32 index = *(u32 *)key;
 	void __percpu *pptr;
-	int cpu, off = 0;
 	u32 size;
+	int err;
 
 	if (unlikely(index >= array->map.max_entries))
 		return -ENOENT;
 
+	err = bpf_map_check_cpu_flags(flags, false);
+	if (unlikely(err))
+		return err;
+
 	/* per_cpu areas are zero-filled and bpf programs can only
 	 * access 'value_size' of them, so copying rounded areas
 	 * will not leak any kernel data
@@ -313,11 +317,7 @@ int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value)
 	size = array->elem_size;
 	rcu_read_lock();
 	pptr = array->pptrs[index & array->index_mask];
-	for_each_possible_cpu(cpu) {
-		copy_map_value_long(map, value + off, per_cpu_ptr(pptr, cpu));
-		check_and_init_map_value(map, value + off);
-		off += size;
-	}
+	bpf_percpu_copy_to_user(map, pptr, value, size, flags);
 	rcu_read_unlock();
 	return 0;
 }
@@ -387,12 +387,12 @@ int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
 	struct bpf_array *array = container_of(map, struct bpf_array, map);
 	u32 index = *(u32 *)key;
 	void __percpu *pptr;
-	int cpu, off = 0;
 	u32 size;
+	int err;
 
-	if (unlikely(map_flags > BPF_EXIST))
-		/* unknown flags */
-		return -EINVAL;
+	err = bpf_map_check_cpu_flags(map_flags, true);
+	if (unlikely(err))
+		return err;
 
 	if (unlikely(index >= array->map.max_entries))
 		/* all elements were pre-allocated, cannot insert a new one */
@@ -411,11 +411,7 @@ int bpf_percpu_array_update(struct bpf_map *map, void *key, void *value,
 	size = array->elem_size;
 	rcu_read_lock();
 	pptr = array->pptrs[index & array->index_mask];
-	for_each_possible_cpu(cpu) {
-		copy_map_value_long(map, per_cpu_ptr(pptr, cpu), value + off);
-		bpf_obj_free_fields(array->map.record, per_cpu_ptr(pptr, cpu));
-		off += size;
-	}
+	bpf_percpu_copy_from_user(map, pptr, value, size, map_flags);
 	rcu_read_unlock();
 	return 0;
 }
kernel/bpf/syscall.c +1 -1
index dbd21484d7a4d..2ee2cf5a8cedf 100644
@@ -316,7 +316,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH) {
 		err = bpf_percpu_hash_copy(map, key, value);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
-		err = bpf_percpu_array_copy(map, key, value);
+		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
 		err = bpf_percpu_cgroup_storage_copy(map, key, value);
 	} else if (map->map_type == BPF_MAP_TYPE_STACK_TRACE) {
Signature · 1 line
2.50.1
author
#10 lore raw

PATCH v4 4/7 bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu_hash and lru_percpu_hash maps

In reply to Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.

---
 include/linux/bpf.h  |  4 +-
 kernel/bpf/hashtab.c | 95 +++++++++++++++++++++++++++-----------------
 kernel/bpf/syscall.c |  2 +-
 3 files changed, 63 insertions(+), 38 deletions(-)
include/linux/bpf.h +3 -1
index bc44b72129e59..c120b00448a13 100644
@@ -2745,7 +2745,7 @@ int map_set_for_each_callback_args(struct bpf_verifier_env *env,
 				   struct bpf_func_state *caller,
 				   struct bpf_func_state *callee);
 
-int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value,
 			  u64 flags);
 int bpf_percpu_hash_update(struct bpf_map *map, void *key, void *value,
@@ -3763,6 +3763,8 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 {
 	switch (map_type) {
 	case BPF_MAP_TYPE_PERCPU_ARRAY:
+	case BPF_MAP_TYPE_PERCPU_HASH:
+	case BPF_MAP_TYPE_LRU_PERCPU_HASH:
 		return true;
 	default:
 		return false;
kernel/bpf/hashtab.c +59 -36

201 lines not on this page · raw message

kernel/bpf/syscall.c +1 -1
index 2ee2cf5a8cedf..91ab9bdd1da38 100644
@@ -314,7 +314,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	bpf_disable_instrumentation();
 	if (map->map_type == BPF_MAP_TYPE_PERCPU_HASH ||
 	    map->map_type == BPF_MAP_TYPE_LRU_PERCPU_HASH) {
-		err = bpf_percpu_hash_copy(map, key, value);
+		err = bpf_percpu_hash_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
 		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
Signature · 1 line
2.50.1
#11 lore raw

Re: [PATCH bpf-next v4 4/7] bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu_hash and lru_percpu_hash maps

Quoted 56 lines · Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_hash and lru_percpu_hash maps to allow updating values for all CPUs with a single value for both update_elem and update_batch APIs.

Introduce BPF_F_CPU flag support for percpu_hash and lru_percpu_hash maps to allow:

* update value for specified CPU for both update_elem and update_batch APIs.
* lookup value for specified CPU for both lookup_elem and lookup_batch APIs.

The BPF_F_CPU flag is passed via:

* map_flags along with embedded cpu info.
* elem_flags along with embedded cpu info.

---
 include/linux/bpf.h  |  4 +-
 kernel/bpf/hashtab.c | 95 +++++++++++++++++++++++++++-----------------
 kernel/bpf/syscall.c |  2 +-
 3 files changed, 63 insertions(+), 38 deletions(-)
include/linux/bpf.h +3 -1
index bc44b72129e59..c120b00448a13 100644
@@ -2745,7 +2745,7 @@ int map_set_for_each_callback_args(struct bpf_verifier_env *env,
                                   struct bpf_func_state *caller,
                                   struct bpf_func_state *callee);
 
-int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_hash_copy(struct bpf_map *map, void *key, void *value, u64 flags);
 int bpf_percpu_array_copy(struct bpf_map *map, void *key, void *value,
                          u64 flags);
 int bpf_percpu_hash_update(struct bpf_map *map, void *key, void *value,
@@ -3763,6 +3763,8 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 {
        switch (map_type) {
        case BPF_MAP_TYPE_PERCPU_ARRAY:
+       case BPF_MAP_TYPE_PERCPU_HASH:
+       case BPF_MAP_TYPE_LRU_PERCPU_HASH:
                return true;
        default:
                return false;
kernel/bpf/hashtab.c +0 -1
index 71f9931ac64cd..031a74c1b7fd7 100644
@@ -937,24 +937,39 @@ static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l)
 }
 
 static void pcpu_copy_value(struct bpf_htab *htab, void __percpu *pptr,
-                           void *value, bool onallcpus)

kernel/bpf/hashtab.c static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) · line 948

Quoted 10 lines
kernel/bpf/hashtab.c +6 -1
+                           void *value, bool onallcpus, u64 map_flags)
 {
+       int cpu = map_flags & BPF_F_CPU ? map_flags >> 32 : 0;
+       int current_cpu = raw_smp_processor_id();
+
        if (!onallcpus) {
                /* copy true value_size bytes */
-               copy_map_value(&htab->map, this_cpu_ptr(pptr), value);
+               copy_map_value(&htab->map, (map_flags & BPF_F_CPU) && cpu != current_cpu ?
+                              per_cpu_ptr(pptr, cpu) : this_cpu_ptr(pptr), value);

FWIW, I still feel like this_cpu_ptr() micro-optimization is unnecessary and is just a distraction. This code is called when user-space updates/looks up per-CPU value, it's not a hot path by any means where this_cpu_ptr() vs per_cpu_ptr() makes any measurable difference

Quoted 12 lines
kernel/bpf/hashtab.c +7 -1
        } else {
                u32 size = round_up(htab->map.value_size, 8);
-               int off = 0, cpu;
+               int off = 0;
+
+               if (map_flags & BPF_F_CPU) {
+                       copy_map_value_long(&htab->map, cpu != current_cpu ?
+                                           per_cpu_ptr(pptr, cpu) : this_cpu_ptr(pptr), value);
+                       return;
+               }
 
                for_each_possible_cpu(cpu) {

kernel/bpf/hashtab.c static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) · line 968

Quoted 10 lines
kernel/bpf/hashtab.c +6 -1
                        copy_map_value_long(&htab->map, per_cpu_ptr(pptr, cpu), value + off);
-                       off += size;
+                       /* same user-provided value is used if
+                        * BPF_F_ALL_CPUS is specified, otherwise value is
+                        * an array of per-cpu values.
+                        */
+                       if (!(map_flags & BPF_F_ALL_CPUS))
+                               off += size;
                }
        }

this couldn't have been replaced by bpf_percpu_copy_to_user?.. (and I just want to emphasize how hard did you make it to review all this by putting those bpf_percpu_copy_to_user and bpf_percpu_copy_from_user on its own in patch #2, instead of having a proper refactoring patch...)

[...]

author
#12 lore raw

Re: [PATCH bpf-next v4 4/7] bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu_hash and lru_percpu_hash maps

Quoted 2 lines · Andrii Nakryiko
Quoted 1 line · Leon Hwang

[...]

Quoted 17 lines
Quoted 17 lines
kernel/bpf/hashtab.c +4 -2
index 71f9931ac64cd..031a74c1b7fd7 100644
@@ -937,24 +937,39 @@ static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l)
 }
 
 static void pcpu_copy_value(struct bpf_htab *htab, void __percpu *pptr,
-                           void *value, bool onallcpus)
+                           void *value, bool onallcpus, u64 map_flags)
 {
+       int cpu = map_flags & BPF_F_CPU ? map_flags >> 32 : 0;
+       int current_cpu = raw_smp_processor_id();
+
        if (!onallcpus) {
                /* copy true value_size bytes */
-               copy_map_value(&htab->map, this_cpu_ptr(pptr), value);
Quoted 9 lines

kernel/bpf/hashtab.c static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) · line 948

Quoted 2 lines
kernel/bpf/hashtab.c +2 -0
+               copy_map_value(&htab->map, (map_flags & BPF_F_CPU) && cpu != current_cpu ?
+                              per_cpu_ptr(pptr, cpu) : this_cpu_ptr(pptr), value);

FWIW, I still feel like this_cpu_ptr() micro-optimization is unnecessary and is just a distraction. This code is called when user-space updates/looks up per-CPU value, it's not a hot path by any means where this_cpu_ptr() vs per_cpu_ptr() makes any measurable difference

OK.

I'll remove it in next revision.

Quoted 23 lines
Quoted 12 lines
kernel/bpf/hashtab.c +7 -1
        } else {
                u32 size = round_up(htab->map.value_size, 8);
-               int off = 0, cpu;
+               int off = 0;
+
+               if (map_flags & BPF_F_CPU) {
+                       copy_map_value_long(&htab->map, cpu != current_cpu ?
+                                           per_cpu_ptr(pptr, cpu) : this_cpu_ptr(pptr), value);
+                       return;
+               }
 
                for_each_possible_cpu(cpu) {

kernel/bpf/hashtab.c static void free_htab_elem(struct bpf_htab *htab, struct htab_elem *l) · line 968

Quoted 10 lines
kernel/bpf/hashtab.c +6 -1
                        copy_map_value_long(&htab->map, per_cpu_ptr(pptr, cpu), value + off);
-                       off += size;
+                       /* same user-provided value is used if
+                        * BPF_F_ALL_CPUS is specified, otherwise value is
+                        * an array of per-cpu values.
+                        */
+                       if (!(map_flags & BPF_F_ALL_CPUS))
+                               off += size;
                }
        }
Quoted 5 lines

this couldn't have been replaced by bpf_percpu_copy_to_user?.. (and I just want to emphasize how hard did you make it to review all this by putting those bpf_percpu_copy_to_user and bpf_percpu_copy_from_user on its own in patch #2, instead of having a proper refactoring patch...)

Sorry about this.

I will use 'bpf_percpu_copy_from_user()' here in next revision.

Thanks,
Leon

author
#13 lore raw

PATCH v4 5/7 bpf: Introduce BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu_cgroup_storage maps

In reply to Leon Hwang

Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to allow updating values for all CPUs with a single value for update_elem API.

Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to allow:

* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.

The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.

---
 include/linux/bpf-cgroup.h |  5 +++--
 include/linux/bpf.h        |  1 +
 kernel/bpf/local_storage.c | 42 ++++++++++++++++++++------------------
 kernel/bpf/syscall.c       |  2 +-
 4 files changed, 27 insertions(+), 23 deletions(-)
include/linux/bpf-cgroup.h +3 -2
index aedf573bdb426..1cb28660aa866 100644
@@ -172,7 +172,8 @@ void bpf_cgroup_storage_link(struct bpf_cgroup_storage *storage,
 void bpf_cgroup_storage_unlink(struct bpf_cgroup_storage *storage);
 int bpf_cgroup_storage_assign(struct bpf_prog_aux *aux, struct bpf_map *map);
 
-int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key, void *value);
+int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key, void *value,
+				   u64 flags);
 int bpf_percpu_cgroup_storage_update(struct bpf_map *map, void *key,
 				     void *value, u64 flags);
 
@@ -467,7 +468,7 @@ static inline struct bpf_cgroup_storage *bpf_cgroup_storage_alloc(
 static inline void bpf_cgroup_storage_free(
 	struct bpf_cgroup_storage *storage) {}
 static inline int bpf_percpu_cgroup_storage_copy(struct bpf_map *map, void *key,
-						 void *value) {
+						 void *value, u64 flags) {
 	return 0;
 }
 static inline int bpf_percpu_cgroup_storage_update(struct bpf_map *map,
include/linux/bpf.h +1 -0
index c120b00448a13..2d67af3e7f870 100644
@@ -3765,6 +3765,7 @@ static inline bool bpf_map_supports_cpu_flags(enum bpf_map_type map_type)
 	case BPF_MAP_TYPE_PERCPU_ARRAY:
 	case BPF_MAP_TYPE_PERCPU_HASH:
 	case BPF_MAP_TYPE_LRU_PERCPU_HASH:
+	case BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE:
 		return true;
 	default:
 		return false;
kernel/bpf/local_storage.c +22 -20

83 lines not on this page · raw message

kernel/bpf/syscall.c +1 -1
index 91ab9bdd1da38..0c88d7f6f1491 100644
@@ -318,7 +318,7 @@ static int bpf_map_copy_value(struct bpf_map *map, void *key, void *value,
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_ARRAY) {
 		err = bpf_percpu_array_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE) {
-		err = bpf_percpu_cgroup_storage_copy(map, key, value);
+		err = bpf_percpu_cgroup_storage_copy(map, key, value, flags);
 	} else if (map->map_type == BPF_MAP_TYPE_STACK_TRACE) {
 		err = bpf_stackmap_copy(map, key, value);
 	} else if (IS_FD_ARRAY(map) || IS_FD_PROG_ARRAY(map)) {
Signature · 1 line
2.50.1
author
#14 lore raw

PATCH v4 6/7 libbpf: Support BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

In reply to Leon Hwang

Add libbpf support for the BPF_F_CPU flag for percpu maps by embedding the cpu info into the high 32 bits of:

1. **flags**: bpf_map_lookup_elem_flags(), bpf_map__lookup_elem(), bpf_map_update_elem() and bpf_map__update_elem()
2. **opts->elem_flags**: bpf_map_lookup_batch() and bpf_map_update_batch()

And the flag can be BPF_F_ALL_CPUS, but cannot be
'BPF_F_CPU | BPF_F_ALL_CPUS'.

Behavior:

* If the flag is BPF_F_ALL_CPUS, the update is applied across all CPUs.
* If the flag is BPF_F_CPU, it updates value only to the specified CPU.
* If the flag is BPF_F_CPU, lookup value only from the specified CPU.
* lookup does not support BPF_F_ALL_CPUS.

---
 tools/lib/bpf/bpf.h    |  8 ++++++++
 tools/lib/bpf/libbpf.c | 33 +++++++++++++++++++++++++++------
 tools/lib/bpf/libbpf.h | 21 ++++++++-------------
 3 files changed, 43 insertions(+), 19 deletions(-)
tools/lib/bpf/bpf.h +8 -0
index 7252150e7ad35..28acb15e982b3 100644
@@ -286,6 +286,14 @@ LIBBPF_API int bpf_map_lookup_and_delete_batch(int fd, void *in_batch,
  *    Update spin_lock-ed map elements. This must be
  *    specified if the map value contains a spinlock.
  *
+ * **BPF_F_CPU**
+ *    As for percpu maps, update value on the specified CPU. And the cpu
+ *    info is embedded into the high 32 bits of **opts->elem_flags**.
+ *
+ * **BPF_F_ALL_CPUS**
+ *    As for percpu maps, update value across all CPUs. This flag cannot
+ *    be used with BPF_F_CPU at the same time.
+ *
  * @param fd BPF map file descriptor
  * @param keys pointer to an array of *count* keys
  * @param values pointer to an array of *count* values
tools/lib/bpf/libbpf.c +27 -6
index fe4fc5438678c..e6a6341da861a 100644
@@ -10603,7 +10603,7 @@ bpf_object__find_map_fd_by_name(const struct bpf_object *obj, const char *name)
 }
 
 static int validate_map_op(const struct bpf_map *map, size_t key_sz,
-			   size_t value_sz, bool check_value_sz)
+			   size_t value_sz, bool check_value_sz, __u64 flags)
 {
 	if (!map_is_created(map)) /* map is not yet created */
 		return -ENOENT;
@@ -10629,6 +10629,27 @@ static int validate_map_op(const struct bpf_map *map, size_t key_sz,
 	case BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE: {
 		int num_cpu = libbpf_num_possible_cpus();
 		size_t elem_sz = roundup(map->def.value_size, 8);
+		__u32 cpu;
+
+		if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) {
+			if ((flags & BPF_F_CPU) && (flags & BPF_F_ALL_CPUS)) {
+				pr_warn("map '%s': can't use BPF_F_CPU and BPF_F_ALL_CPUS at the same time\n",
+					map->name);
+				return -EINVAL;
+			}
+			cpu = flags >> 32;
+			if (cpu >= num_cpu) {
+				pr_warn("map '%s': cpu %u in flags cannot be GE num cpus %d\n",
+					map->name, cpu, num_cpu);
+				return -ERANGE;
+			}
+			if (value_sz != elem_sz) {
+				pr_warn("map '%s': unexpected value size %zu provided for per-CPU map, expected %zu\n",
+					map->name, value_sz, elem_sz);
+				return -EINVAL;
+			}
+			break;
+		}
 
 		if (value_sz != num_cpu * elem_sz) {
 			pr_warn("map '%s': unexpected value size %zu provided for per-CPU map, expected %d * %zu = %zd\n",
@@ -10654,7 +10675,7 @@ int bpf_map__lookup_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10667,7 +10688,7 @@ int bpf_map__update_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10679,7 +10700,7 @@ int bpf_map__delete_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */);
+	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10692,7 +10713,7 @@ int bpf_map__lookup_and_delete_elem(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, value_sz, true);
+	err = validate_map_op(map, key_sz, value_sz, true, flags);
 	if (err)
 		return libbpf_err(err);
 
@@ -10704,7 +10725,7 @@ int bpf_map__get_next_key(const struct bpf_map *map,
 {
 	int err;
 
-	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */);
+	err = validate_map_op(map, key_sz, 0, false /* check_value_sz */, 0);
 	if (err)
 		return libbpf_err(err);
 
tools/lib/bpf/libbpf.h +8 -13
index 2e91148d9b44d..f221dc5c6ba41 100644
@@ -1196,12 +1196,13 @@ LIBBPF_API struct bpf_map *bpf_map__inner_map(struct bpf_map *map);
  * @param key_sz size in bytes of key data, needs to match BPF map definition's **key_size**
  * @param value pointer to memory in which looked up value will be stored
  * @param value_sz size in byte of value data memory; it has to match BPF map
- * definition's **value_size**. For per-CPU BPF maps value size has to be
- * a product of BPF map value size and number of possible CPUs in the system
- * (could be fetched with **libbpf_num_possible_cpus()**). Note also that for
- * per-CPU values value size has to be aligned up to closest 8 bytes for
- * alignment reasons, so expected size is: `round_up(value_size, 8)
- * * libbpf_num_possible_cpus()`.
+ * definition's **value_size**. For per-CPU BPF maps, value size can be
+ * `round_up(value_size, 8)` if **BPF_F_CPU** or **BPF_F_ALL_CPUS** is
+ * specified in **flags**, otherwise a product of BPF map value size and number
+ * of possible CPUs in the system (could be fetched with
+ * **libbpf_num_possible_cpus()**). Note else that for per-CPU values value
+ * size has to be aligned up to closest 8 bytes, so expected size is:
+ * `round_up(value_size, 8) * libbpf_num_possible_cpus()`.
  * @flags extra flags passed to kernel for this operation
  * @return 0, on success; negative error, otherwise
  *
@@ -1219,13 +1220,7 @@ LIBBPF_API int bpf_map__lookup_elem(const struct bpf_map *map,
  * @param key pointer to memory containing bytes of the key
  * @param key_sz size in bytes of key data, needs to match BPF map definition's **key_size**
  * @param value pointer to memory containing bytes of the value
- * @param value_sz size in byte of value data memory; it has to match BPF map
- * definition's **value_size**. For per-CPU BPF maps value size has to be
- * a product of BPF map value size and number of possible CPUs in the system
- * (could be fetched with **libbpf_num_possible_cpus()**). Note also that for
- * per-CPU values value size has to be aligned up to closest 8 bytes for
- * alignment reasons, so expected size is: `round_up(value_size, 8)
- * * libbpf_num_possible_cpus()`.
+ * @param value_sz refer to **bpf_map__lookup_elem**'s description.'
  * @flags extra flags passed to kernel for this operation
  * @return 0, on success; negative error, otherwise
  *
Signature · 1 line
2.50.1
#15 lore raw

Re: [PATCH bpf-next v4 6/7] libbpf: Support BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

Quoted 26 lines · Leon Hwang

Add libbpf support for the BPF_F_CPU flag for percpu maps by embedding the cpu info into the high 32 bits of:

1. **flags**: bpf_map_lookup_elem_flags(), bpf_map__lookup_elem(), bpf_map_update_elem() and bpf_map__update_elem()
2. **opts->elem_flags**: bpf_map_lookup_batch() and bpf_map_update_batch()

And the flag can be BPF_F_ALL_CPUS, but cannot be
'BPF_F_CPU | BPF_F_ALL_CPUS'.

Behavior:

* If the flag is BPF_F_ALL_CPUS, the update is applied across all CPUs.
* If the flag is BPF_F_CPU, it updates value only to the specified CPU.
* If the flag is BPF_F_CPU, lookup value only from the specified CPU.
* lookup does not support BPF_F_ALL_CPUS.

---
 tools/lib/bpf/bpf.h    |  8 ++++++++
 tools/lib/bpf/libbpf.c | 33 +++++++++++++++++++++++++++------
 tools/lib/bpf/libbpf.h | 21 ++++++++-------------
 3 files changed, 43 insertions(+), 19 deletions(-)

[...]

Quoted 4 lines
tools/lib/bpf/libbpf.c +0 -0
@@ -10629,6 +10629,27 @@ static int validate_map_op(const struct bpf_map *map, size_t key_sz,
        case BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE: {
                int num_cpu = libbpf_num_possible_cpus();
                size_t elem_sz = roundup(map->def.value_size, 8);

tools/lib/bpf/libbpf.c static int validate_map_op(const struct bpf_map *map, size_t key_sz, · line 10641

Quoted 10 lines
tools/lib/bpf/libbpf.c +10 -0
+               __u32 cpu;
+
+               if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) {
+                       if ((flags & BPF_F_CPU) && (flags & BPF_F_ALL_CPUS)) {
+                               pr_warn("map '%s': can't use BPF_F_CPU and BPF_F_ALL_CPUS at the same time\n",
+                                       map->name);
+                               return -EINVAL;
+                       }
+                       cpu = flags >> 32;
+                       if (cpu >= num_cpu) {

only check this if BPF_F_CPU is set

tools/lib/bpf/libbpf.c static int validate_map_op(const struct bpf_map *map, size_t key_sz, · line 10642

Quoted 1 line
tools/lib/bpf/libbpf.c +1 -0
+                               pr_warn("map '%s': cpu %u in flags cannot be GE num cpus %d\n",

"GE"? maybe "CPU #%d is not valid"... (or don't even check cpu value itself, it's unlikely user using BPF_F_CPU will get it so wrong)

[...]

author
#16 lore raw

Re: [PATCH bpf-next v4 6/7] libbpf: Support BPF_F_CPU and BPF_F_ALL_CPUS flags for percpu maps

Quoted 47 lines · Andrii Nakryiko
Quoted 26 lines · Leon Hwang

Add libbpf support for the BPF_F_CPU flag for percpu maps by embedding the cpu info into the high 32 bits of:

1. **flags**: bpf_map_lookup_elem_flags(), bpf_map__lookup_elem(), bpf_map_update_elem() and bpf_map__update_elem()
2. **opts->elem_flags**: bpf_map_lookup_batch() and bpf_map_update_batch()

And the flag can be BPF_F_ALL_CPUS, but cannot be
'BPF_F_CPU | BPF_F_ALL_CPUS'.

Behavior:

* If the flag is BPF_F_ALL_CPUS, the update is applied across all CPUs.
* If the flag is BPF_F_CPU, it updates value only to the specified CPU.
* If the flag is BPF_F_CPU, lookup value only from the specified CPU.
* lookup does not support BPF_F_ALL_CPUS.

---
 tools/lib/bpf/bpf.h    |  8 ++++++++
 tools/lib/bpf/libbpf.c | 33 +++++++++++++++++++++++++++------
 tools/lib/bpf/libbpf.h | 21 ++++++++-------------
 3 files changed, 43 insertions(+), 19 deletions(-)

[...]

Quoted 4 lines
tools/lib/bpf/libbpf.c +0 -0
@@ -10629,6 +10629,27 @@ static int validate_map_op(const struct bpf_map *map, size_t key_sz,
        case BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE: {
                int num_cpu = libbpf_num_possible_cpus();
                size_t elem_sz = roundup(map->def.value_size, 8);

tools/lib/bpf/libbpf.c static int validate_map_op(const struct bpf_map *map, size_t key_sz, · line 10641

Quoted 10 lines
tools/lib/bpf/libbpf.c +10 -0
+               __u32 cpu;
+
+               if (flags & (BPF_F_CPU | BPF_F_ALL_CPUS)) {
+                       if ((flags & BPF_F_CPU) && (flags & BPF_F_ALL_CPUS)) {
+                               pr_warn("map '%s': can't use BPF_F_CPU and BPF_F_ALL_CPUS at the same time\n",
+                                       map->name);
+                               return -EINVAL;
+                       }
+                       cpu = flags >> 32;
+                       if (cpu >= num_cpu) {

only check this if BPF_F_CPU is set

Quoted 5 lines

tools/lib/bpf/libbpf.c static int validate_map_op(const struct bpf_map *map, size_t key_sz, · line 10642

Quoted 1 line
tools/lib/bpf/libbpf.c +1 -0
+                               pr_warn("map '%s': cpu %u in flags cannot be GE num cpus %d\n",

"GE"? maybe "CPU #%d is not valid"... (or don't even check cpu value itself, it's unlikely user using BPF_F_CPU will get it so wrong)

Let's remove it instead.

Thanks,
Leon

author
#17 lore raw

PATCH v4 7/7 selftests/bpf: Add cases to test BPF_F_CPU and BPF_F_ALL_CPUS flags

In reply to Leon Hwang

Add test coverage for the new BPF_F_CPU and BPF_F_ALL_CPUS flags support in percpu maps. The following APIs are exercised:

* bpf_map_update_batch()
* bpf_map_lookup_batch()
* bpf_map_update_elem()
* bpf_map__update_elem()
* bpf_map_lookup_elem_flags()
* bpf_map__lookup_elem()

cd tools/testing/selftests/bpf/
./test_progs -t percpu_alloc

253/13  percpu_alloc/cpu_flag_percpu_array:OK
253/14  percpu_alloc/cpu_flag_percpu_hash:OK
253/15  percpu_alloc/cpu_flag_lru_percpu_hash:OK
253/16  percpu_alloc/cpu_flag_percpu_cgroup_storage:OK
253     percpu_alloc:OK

Summary: 1/16 PASSED, 0 SKIPPED, 0 FAILED

---
 .../selftests/bpf/prog_tests/percpu_alloc.c   | 224 ++++++++++++++++++
 .../selftests/bpf/progs/percpu_alloc_array.c  |  32 +++
 2 files changed, 256 insertions(+)
tools/testing/selftests/bpf/prog_tests/percpu_alloc.c +224 -0
index 343da65864d6d..98b6e8cc7ae60 100644
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <test_progs.h>
+#include "cgroup_helpers.h"
 #include "percpu_alloc_array.skel.h"
 #include "percpu_alloc_cgrp_local_storage.skel.h"
 #include "percpu_alloc_fail.skel.h"
@@ -115,6 +116,221 @@ static void test_failure(void) {
 	RUN_TESTS(percpu_alloc_fail);
 }
 
+static void test_percpu_map_op_cpu_flag(struct bpf_map *map, void *keys, size_t key_sz,
+					u32 max_entries, bool test_batch)
+{
+	int i, j, cpu, map_fd, value_size, nr_cpus, err;
+	u64 *values = NULL, batch = 0, flags;
+	const u64 value = 0xDEADC0DE;
+	size_t value_sz = sizeof(u64);
+	u32 count;
+	LIBBPF_OPTS(bpf_map_batch_opts, batch_opts);
+
+	nr_cpus = libbpf_num_possible_cpus();
+	if (!ASSERT_GT(nr_cpus, 0, "libbpf_num_possible_cpus"))
+		return;
+
+	value_size = value_sz * nr_cpus;
+	values = calloc(max_entries, value_size);
+	if (!ASSERT_OK_PTR(values, "calloc values"))
+		goto out;
+	memset(values, 0, value_size * max_entries);
+
+	map_fd = bpf_map__fd(map);
+	flags = (u64)nr_cpus << 32 | BPF_F_CPU;
+	err = bpf_map_update_elem(map_fd, keys, values, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_update_elem_opts -ERANGE"))
+		goto out;
+
+	err = bpf_map__update_elem(map, keys, key_sz, values, value_sz, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map__update_elem_opts -ERANGE"))
+		goto out;
+
+	err = bpf_map_lookup_elem_flags(map_fd, keys, values, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_lookup_elem_opts -ERANGE"))
+		goto out;
+
+	err = bpf_map__lookup_elem(map, keys, key_sz, values, value_sz, flags);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map__lookup_elem_opts -ERANGE"))
+		goto out;
+
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
+		/* clear value on all cpus */
+		values[0] = 0;
+		flags = BPF_F_ALL_CPUS;
+		for (i = 0; i < max_entries; i++) {
+			err = bpf_map__update_elem(map, keys + i * key_sz, key_sz, values,
+						   value_sz, flags);
+			if (!ASSERT_OK(err, "bpf_map__update_elem"))
+				goto out;
+		}
+
+		/* update value on specified cpu */
+		for (i = 0; i < max_entries; i++) {
+			values[0] = value;
+			flags = (u64)cpu << 32 | BPF_F_CPU;
+			err = bpf_map__update_elem(map, keys + i * key_sz, key_sz, values,
+						   value_sz, flags);
+			if (!ASSERT_OK(err, "bpf_map__update_elem specified cpu"))
+				goto out;
+
+			/* lookup then check value on CPUs */
+			for (j = 0; j < nr_cpus; j++) {
+				flags = (u64)j << 32 | BPF_F_CPU;
+				err = bpf_map__lookup_elem(map, keys + i * key_sz, key_sz, values,
+							   value_sz, flags);
+				if (!ASSERT_OK(err, "bpf_map__lookup_elem specified cpu"))
+					goto out;
+				if (!ASSERT_EQ(values[0], j != cpu ? 0 : value,
+					       "bpf_map__lookup_elem value on specified cpu"))
+					goto out;
+			}
+		}
+	}
+
+	if (!test_batch)
+		goto out;
+
+	batch_opts.elem_flags = (u64)nr_cpus << 32 | BPF_F_CPU;
+	err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+	if (!ASSERT_EQ(err, -ERANGE, "bpf_map_update_batch -ERANGE"))
+		goto out;
+
+	for (cpu = 0; cpu < nr_cpus; cpu++) {
+		memset(values, 0, max_entries * value_size);
+
+		/* clear values across all CPUs */
+		batch_opts.elem_flags = BPF_F_ALL_CPUS;
+		err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+		if (!ASSERT_OK(err, "bpf_map_update_batch all cpus"))
+			goto out;
+
+		/* update values on specified CPU */
+		for (i = 0; i < max_entries; i++)
+			values[i] = value;
+
+		batch_opts.elem_flags = (u64)cpu << 32 | BPF_F_CPU;
+		err = bpf_map_update_batch(map_fd, keys, values, &max_entries, &batch_opts);
+		if (!ASSERT_OK(err, "bpf_map_update_batch specified cpu"))
+			goto out;
+
+		/* lookup values on specified CPU */
+		memset(values, 0, max_entries * value_sz);
+		err = bpf_map_lookup_batch(map_fd, NULL, &batch, keys, values, &count, &batch_opts);
+		if (!ASSERT_TRUE(!err || err == -ENOENT, "bpf_map_lookup_batch specified cpu"))
+			goto out;
+
+		for (i = 0; i < max_entries; i++)
+			if (!ASSERT_EQ(values[i], value, "value on specified cpu"))
+				goto out;
+
+		/* lookup values from all CPUs */
+		batch_opts.elem_flags = 0;
+		memset(values, 0, max_entries * value_size);
+		err = bpf_map_lookup_batch(map_fd, NULL, &batch, keys, values, &count, &batch_opts);
+		if (!ASSERT_TRUE(!err || err == -ENOENT, "bpf_map_lookup_batch all cpus"))
+			goto out;
+
+		for (i = 0; i < max_entries; i++) {
+			for (j = 0; j < nr_cpus; j++) {
+				if (!ASSERT_EQ(values[i*nr_cpus + j], j != cpu ? 0 : value,
+					       "value on specified cpu"))
+					goto out;
+			}
+		}
+	}
+
+out:
+	if (values)
+		free(values);
+}
+
+static void test_percpu_map_cpu_flag(enum bpf_map_type map_type)
+{
+	struct percpu_alloc_array *skel;
+	size_t key_sz = sizeof(int);
+	int *keys = NULL, i, err;
+	struct bpf_map *map;
+	u32 max_entries;
+
+	skel = percpu_alloc_array__open();
+	if (!ASSERT_OK_PTR(skel, "percpu_alloc_array__open"))
+		return;
+
+	map = skel->maps.percpu;
+	bpf_map__set_type(map, map_type);
+
+	err = percpu_alloc_array__load(skel);
+	if (!ASSERT_OK(err, "test_percpu_alloc__load"))
+		goto out;
+
+	max_entries = bpf_map__max_entries(map);
+	keys = calloc(max_entries, key_sz);
+	if (!ASSERT_OK_PTR(keys, "calloc keys"))
+		goto out;
+
+	for (i = 0; i < max_entries; i++)
+		keys[i] = i;
+
+	test_percpu_map_op_cpu_flag(map, keys, key_sz, max_entries, true);
+out:
+	if (keys)
+		free(keys);
+	percpu_alloc_array__destroy(skel);
+}
+
+static void test_percpu_array_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_PERCPU_ARRAY);
+}
+
+static void test_percpu_hash_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_PERCPU_HASH);
+}
+
+static void test_lru_percpu_hash_cpu_flag(void)
+{
+	test_percpu_map_cpu_flag(BPF_MAP_TYPE_LRU_PERCPU_HASH);
+}
+
+static void test_percpu_cgroup_storage_cpu_flag(void)
+{
+	struct bpf_cgroup_storage_key key;
+	struct percpu_alloc_array *skel;
+	int cgroup = -1, prog_fd, err;
+	struct bpf_map *map;
+
+	skel = percpu_alloc_array__open_and_load();
+	if (!ASSERT_OK_PTR(skel, "percpu_alloc_array__open_and_load"))
+		return;
+
+	cgroup = create_and_get_cgroup("/cg_percpu");
+	if (!ASSERT_GE(cgroup, 0, "create_and_get_cgroup"))
+		goto out;
+
+	err = join_cgroup("/cg_percpu");
+	if (!ASSERT_OK(err, "join_cgroup"))
+		goto out;
+
+	prog_fd = bpf_program__fd(skel->progs.cgroup_egress);
+	err = bpf_prog_attach(prog_fd, cgroup, BPF_CGROUP_INET_EGRESS, 0);
+	if (!ASSERT_OK(err, "bpf_prog_attach"))
+		goto out;
+
+	map = skel->maps.percpu_cgroup_storage;
+	err = bpf_map_get_next_key(bpf_map__fd(map), NULL, &key);
+	if (!ASSERT_OK(err, "bpf_map_get_next_key"))
+		goto out;
+
+	test_percpu_map_op_cpu_flag(map, &key, sizeof(key), 1, false);
+out:
+	bpf_prog_detach2(-1, cgroup, BPF_CGROUP_INET_EGRESS);
+	close(cgroup);
+	cleanup_cgroup_environment();
+	percpu_alloc_array__destroy(skel);
+}
+
 void test_percpu_alloc(void)
 {
 	if (test__start_subtest("array"))
@@ -125,4 +341,12 @@ void test_percpu_alloc(void)
 		test_cgrp_local_storage();
 	if (test__start_subtest("failure_tests"))
 		test_failure();
+	if (test__start_subtest("cpu_flag_percpu_array"))
+		test_percpu_array_cpu_flag();
+	if (test__start_subtest("cpu_flag_percpu_hash"))
+		test_percpu_hash_cpu_flag();
+	if (test__start_subtest("cpu_flag_lru_percpu_hash"))
+		test_lru_percpu_hash_cpu_flag();
+	if (test__start_subtest("cpu_flag_percpu_cgroup_storage"))
+		test_percpu_cgroup_storage_cpu_flag();
 }
tools/testing/selftests/bpf/progs/percpu_alloc_array.c +32 -0
index 37c2d2608ec0b..427301909c349 100644
@@ -187,4 +187,36 @@ int BPF_PROG(test_array_map_10)
 	return 0;
 }
 
+struct {
+	__uint(type, BPF_MAP_TYPE_PERCPU_ARRAY);
+	__uint(max_entries, 2);
+	__type(key, int);
+	__type(value, u64);
+} percpu SEC(".maps");
+
+SEC("?fentry/bpf_fentry_test1")
+int BPF_PROG(test_percpu_array, int x)
+{
+	u64 value = 0xDEADC0DE;
+	int key = 0;
+
+	bpf_map_update_elem(&percpu, &key, &value, BPF_ANY);
+	return 0;
+}
+
+struct {
+	__uint(type, BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE);
+	__type(key, struct bpf_cgroup_storage_key);
+	__type(value, u64);
+} percpu_cgroup_storage SEC(".maps");
+
+SEC("cgroup_skb/egress")
+int cgroup_egress(struct __sk_buff *skb)
+{
+	u64 *val = bpf_get_local_storage(&percpu_cgroup_storage, 0);
+
+	__sync_fetch_and_add(val, 1);
+	return 1;
+}
+
 char _license[] SEC("license") = "GPL";
Signature · 1 line
2.50.1