arm64: dts: rockchip: Further describe the WiFi for the Pinephone Pro
Subsystems (2)
PATCH v2 1/1 arm64: dts: rockchip: Further describe the WiFi for the Pinephone Pro
Update the wake-up pin and associated interupt details for the Pinephone Pro WiFi module. Details obtained from the published PinephonePro-Schematic-V1.0-20211127.pdf page 19.
Signed-off-by Peter Robinson <[email protected]>
---
v2:
- Update commit
- Drop alias
.../boot/dts/rockchip/rk3399-pinephone-pro.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts +18 -0
@@ -689,6 +689,12 @@ vcc1v8_codec_en: vcc1v8-codec-en { }; }; + wifi { + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + wireless-bluetooth { bt_wake_pin: bt-wake-pin { rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -715,7 +721,19 @@ &sdio0 { pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; sd-uhs-sdr104; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; + + brcmf: wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&gpio4>; + interrupts = <RK_PD0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; }; &pwm0 {
Signature · 1 line
2.51.0
Quoted 5 lines · Peter Robinson
Update the wake-up pin and associated interupt details for the Pinephone Pro WiFi module. Details obtained from the published PinephonePro-Schematic-V1.0-20211127.pdf page 19.
Applied, thanks!
[1/1] arm64: dts: rockchip: Further describe the WiFi for the Pinephone Pro
commit: 096bd8c679185f898cae9933c6a68650fa26ea4f
Best regards,
Signature · 1 line
Heiko Stuebner <[email protected]>