dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
Subsystems (4)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
Convert the aspeed,ast2x00-p2a-ctrl binding to DT schema format. The schema is simple enough to just add it to the parent aspeed,ast2x00-scu binding.
--- .../bindings/mfd/aspeed,ast2x00-scu.yaml | 33 ++++++++++++- .../bindings/misc/aspeed-p2a-ctrl.txt | 46 ------------------- 2 files changed, 32 insertions(+), 47 deletions(-) delete mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
Documentation/devicetree/bindings/mfd/aspeed,ast2x00-scu.yaml +32 -1
@@ -48,8 +48,34 @@ properties: patternProperties: '^p2a-control@[0-9a-f]+$': - description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt + description: > + PCI-to-AHB Bridge Control + + The bridge is available on platforms with the VGA enabled on the Aspeed + device. In this case, the host has access to a 64KiB window into all of + the BMC's memory. The BMC can disable this bridge. If the bridge is + enabled, the host has read access to all the regions of memory, however + the host only has read and write access depending on a register + controlled by the BMC. type: object + additionalProperties: false + + properties: + compatible: + enum: + - aspeed,ast2400-p2a-ctrl + - aspeed,ast2500-p2a-ctrl + reg: + maxItems: 1 + + memory-region: + maxItems: 1 + description: + A reserved_memory region to be used for the PCI to AHB mapping + + required: + - compatible + - reg '^pinctrl(@[0-9a-f]+)?$': type: object
@@ -123,6 +149,11 @@ examples: #size-cells = <1>; ranges = <0x0 0x1e6e2000 0x1000>; + p2a-control@2c { + compatible = "aspeed,ast2400-p2a-ctrl"; + reg = <0x2c 0x4>; + }; + silicon-id@7c { compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; reg = <0x7c 0x4>, <0x150 0x8>;
Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt deleted +0 -46
46 lines not on this page · raw message
Signature · 1 line
2.50.1
Quoted 4 lines · Rob Herring (Arm)
Convert the aspeed,ast2x00-p2a-ctrl binding to DT schema format. The schema is simple enough to just add it to the parent aspeed,ast2x00-scu binding.
Signed-off-by Rob Herring (Arm) <[email protected]>
Thanks Rob.
Re: (subset) [PATCH] dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
In reply to Rob Herring (Arm)Quoted 4 lines · Rob Herring (Arm)
Convert the aspeed,ast2x00-p2a-ctrl binding to DT schema format. The schema is simple enough to just add it to the parent aspeed,ast2x00-scu binding.
Applied, thanks!
[1/1] dt-bindings: mfd: Convert aspeed,ast2400-p2a-ctrl to DT schema
commit: 61642a20a70e4f5f025b7f4f98c31caddccc3427
--
Lee Jones [李琼斯]