Skip to contentSkip to conversation

ASoc: tas2783A: Add soundwire based codec driver

PATCH Superseded Niranjan H Y 2 participants 5 messages Sep 1, 2025 – Sep 10, 2025

Subsystems (4)

v2 of 8 Superseded Latest is v8 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/4 ASoc: tas2783A: Add soundwire based codec driver

TAS2783 is mono digital input class-D Smart Amplifier based on MIPI Alliance Soundwire interface. The driver supports loading the algorithm coefficients for one or more tas2783 chips.

---
v2:
- append Volume to amp gain mixer control
- remove unwanted debug log

---
 sound/soc/codecs/Kconfig       |   14 +
 sound/soc/codecs/Makefile      |    2 +
 sound/soc/codecs/tas2783-sdw.c | 1417 ++++++++++++++++++++++++++++++++
 sound/soc/codecs/tas2783.h     |  107 +++
 4 files changed, 1540 insertions(+)
 create mode 100644 sound/soc/codecs/tas2783-sdw.c
 create mode 100644 sound/soc/codecs/tas2783.h
sound/soc/codecs/Kconfig +14 -0
index b8d58d2fe326..1f012e6a6c9e 100644
@@ -266,6 +266,7 @@ config SND_SOC_ALL_CODECS
 	imply SND_SOC_TAS2770
 	imply SND_SOC_TAS2780
 	imply SND_SOC_TAS2781_I2C
+	imply SND_SOC_TAS2783_SDW
 	imply SND_SOC_TAS5086
 	imply SND_SOC_TAS571X
 	imply SND_SOC_TAS5720
@@ -2074,6 +2075,19 @@ config SND_SOC_TAS2781_I2C
 	  algo coefficient setting, for one, two or even multiple TAS2781
 	  chips.
 
+config SND_SOC_TAS2783_SDW
+	tristate "Texas Instruments TAS2783 speaker amplifier (sdw)"
+	select SOUNDWIRE
+	select REGMAP
+	select REGMAP_SOUNDWIRE
+	select EFI
+	select CRC32
+	help
+	  Enable support for Texas Instruments TAS2783A Digital input
+	  mono Class-D and DSP-inside audio power amplifiers. TAS2783
+	  driver implements a flexible and configurable algorithm
+	  cofficient setting, for one, two or multiple TAS2783 chips.
+
 config SND_SOC_TAS5086
 	tristate "Texas Instruments TAS5086 speaker amplifier"
 	depends on I2C
sound/soc/codecs/Makefile +2 -0
index a476d6c45451..1920fa17be8d 100644
@@ -316,6 +316,7 @@ snd-soc-tas2781-comlib-y := tas2781-comlib.o
 snd-soc-tas2781-comlib-i2c-y := tas2781-comlib-i2c.o
 snd-soc-tas2781-fmwlib-y := tas2781-fmwlib.o
 snd-soc-tas2781-i2c-y := tas2781-i2c.o
+snd-soc-tas2783-sdw-y := tas2783-sdw.o
 snd-soc-tfa9879-y := tfa9879.o
 snd-soc-tfa989x-y := tfa989x.o
 snd-soc-tlv320adc3xxx-y := tlv320adc3xxx.o
@@ -732,6 +733,7 @@ obj-$(CONFIG_SND_SOC_TAS2781_COMLIB)	+= snd-soc-tas2781-comlib.o
 obj-$(CONFIG_SND_SOC_TAS2781_COMLIB_I2C)	+= snd-soc-tas2781-comlib-i2c.o
 obj-$(CONFIG_SND_SOC_TAS2781_FMWLIB)	+= snd-soc-tas2781-fmwlib.o
 obj-$(CONFIG_SND_SOC_TAS2781_I2C)	+= snd-soc-tas2781-i2c.o
+obj-$(CONFIG_SND_SOC_TAS2783_SDW)	+= snd-soc-tas2783-sdw.o
 obj-$(CONFIG_SND_SOC_TAS5086)	+= snd-soc-tas5086.o
 obj-$(CONFIG_SND_SOC_TAS571X)	+= snd-soc-tas571x.o
 obj-$(CONFIG_SND_SOC_TAS5720)	+= snd-soc-tas5720.o
sound/soc/codecs/tas2783-sdw.c new file +1417 -0

1,417 lines not on this page · raw message

sound/soc/codecs/tas2783.h new file +107 -0

107 lines not on this page · raw message

Signature · 1 line
2.25.1
#1 lore raw

PATCH v2 2/4 ASoc: tas2783A: machine driver amp utility for TI devices

Machine driver amp utility file to initialize and support
multiple tas2783a devices are added.

---
 include/sound/soc_sdw_utils.h        |  8 +++
 sound/soc/sdw_utils/Makefile         |  3 +-
 sound/soc/sdw_utils/soc_sdw_ti_amp.c | 93 ++++++++++++++++++++++++++++
 3 files changed, 103 insertions(+), 1 deletion(-)
 create mode 100644 sound/soc/sdw_utils/soc_sdw_ti_amp.c
include/sound/soc_sdw_utils.h +8 -0
index 6049a5d0cfcd..3c5e9b2af7f1 100644
@@ -248,5 +248,13 @@ int asoc_sdw_cs42l43_spk_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_so
 int asoc_sdw_cs42l43_dmic_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_dai *dai);
 int asoc_sdw_cs_spk_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_dai *dai);
 int asoc_sdw_maxim_spk_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_dai *dai);
+/* TI */
+int asoc_sdw_ti_amp_init(struct snd_soc_card *card,
+			 struct snd_soc_dai_link *dai_links,
+			 struct asoc_sdw_codec_info *info,
+			 bool playback);
+int asoc_sdw_ti_spk_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_dai *dai);
+int asoc_sdw_ti_amp_initial_settings(struct snd_soc_card *card,
+				     const char *name_prefix);
 
 #endif
sound/soc/sdw_utils/Makefile +2 -1
index daf019113553..a87c53e1a2c1 100644
@@ -6,5 +6,6 @@ snd-soc-sdw-utils-y := soc_sdw_utils.o soc_sdw_dmic.o soc_sdw_rt_dmic.o \
 		       soc_sdw_bridge_cs35l56.o 			\
 		       soc_sdw_cs42l42.o soc_sdw_cs42l43.o 		\
 		       soc_sdw_cs_amp.o					\
-		       soc_sdw_maxim.o
+		       soc_sdw_maxim.o \
+		       soc_sdw_ti_amp.o
 obj-$(CONFIG_SND_SOC_SDW_UTILS) += snd-soc-sdw-utils.o
sound/soc/sdw_utils/soc_sdw_ti_amp.c new file +93 -0

93 lines not on this page · raw message

Signature · 1 line
2.25.1
#2 lore raw

PATCH v2 3/4 ASoc: tas2783A: add machine driver changes

In reply to Niranjan H Y

Add tas2783-codec for codec_info

---
 sound/soc/sdw_utils/soc_sdw_utils.c | 38 +++++++++++++++++++++--------
 1 file changed, 28 insertions(+), 10 deletions(-)
sound/soc/sdw_utils/soc_sdw_utils.c +28 -10
index 1580331cd34c..56c72ef27e7b 100644
@@ -35,12 +35,12 @@ static const struct snd_kcontrol_new generic_spk_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Speaker"),
 };
 
-static const struct snd_soc_dapm_widget maxim_widgets[] = {
+static const struct snd_soc_dapm_widget lr_spk_widgets[] = {
 	SND_SOC_DAPM_SPK("Left Spk", NULL),
 	SND_SOC_DAPM_SPK("Right Spk", NULL),
 };
 
-static const struct snd_kcontrol_new maxim_controls[] = {
+static const struct snd_kcontrol_new lr_spk_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Left Spk"),
 	SOC_DAPM_PIN_SWITCH("Right Spk"),
 };
@@ -58,6 +58,24 @@ static const struct snd_kcontrol_new rt700_controls[] = {
 };
 
 struct asoc_sdw_codec_info codec_info_list[] = {
+	{
+		.part_id = 0x0000, /* TAS2783A */
+		.dais = {
+			{
+				.direction = {true, true},
+				.dai_name = "tas2783-codec",
+				.dai_type = SOC_SDW_DAI_TYPE_AMP,
+				.dailink = {SOC_SDW_AMP_OUT_DAI_ID, SOC_SDW_AMP_IN_DAI_ID},
+				.init = asoc_sdw_ti_amp_init,
+				.rtd_init = asoc_sdw_ti_spk_rtd_init,
+				.controls = lr_spk_controls,
+				.num_controls = ARRAY_SIZE(lr_spk_controls),
+				.widgets = lr_spk_widgets,
+				.num_widgets = ARRAY_SIZE(lr_spk_widgets),
+			},
+		},
+		.dai_num = 1,
+	},
 	{
 		.part_id = 0x700,
 		.dais = {
@@ -450,10 +468,10 @@ struct asoc_sdw_codec_info codec_info_list[] = {
 				.dailink = {SOC_SDW_AMP_OUT_DAI_ID, SOC_SDW_AMP_IN_DAI_ID},
 				.init = asoc_sdw_maxim_init,
 				.rtd_init = asoc_sdw_maxim_spk_rtd_init,
-				.controls = maxim_controls,
-				.num_controls = ARRAY_SIZE(maxim_controls),
-				.widgets = maxim_widgets,
-				.num_widgets = ARRAY_SIZE(maxim_widgets),
+				.controls = lr_spk_controls,
+				.num_controls = ARRAY_SIZE(lr_spk_controls),
+				.widgets = lr_spk_widgets,
+				.num_widgets = ARRAY_SIZE(lr_spk_widgets),
 			},
 		},
 		.dai_num = 1,
@@ -469,10 +487,10 @@ struct asoc_sdw_codec_info codec_info_list[] = {
 				.dailink = {SOC_SDW_AMP_OUT_DAI_ID, SOC_SDW_UNUSED_DAI_ID},
 				.init = asoc_sdw_maxim_init,
 				.rtd_init = asoc_sdw_maxim_spk_rtd_init,
-				.controls = maxim_controls,
-				.num_controls = ARRAY_SIZE(maxim_controls),
-				.widgets = maxim_widgets,
-				.num_widgets = ARRAY_SIZE(maxim_widgets),
+				.controls = lr_spk_controls,
+				.num_controls = ARRAY_SIZE(lr_spk_controls),
+				.widgets = lr_spk_widgets,
+				.num_widgets = ARRAY_SIZE(lr_spk_widgets),
 			},
 		},
 		.dai_num = 1,
Signature · 1 line
2.25.1
#3 lore raw

PATCH v2 4/4 tas2783A: Add acpi match changes for Intel MTL

In reply to Niranjan H Y

acpi match changes to support tas2783a on mtl
on link 0 for 2 devices

---
 .../intel/common/soc-acpi-intel-mtl-match.c   | 30 +++++++++++++++++++
 1 file changed, 30 insertions(+)
sound/soc/intel/common/soc-acpi-intel-mtl-match.c +30 -0
index 75dc8935a794..ec9fd8486c05 100644
@@ -948,6 +948,30 @@ static const struct snd_soc_acpi_adr_device cs42l42_0_adr[] = {
 	}
 };
 
+static const struct snd_soc_acpi_adr_device tas2783_0_adr[] = {
+	{
+		.adr = 0x0000380102000001ull,
+		.num_endpoints = 1,
+		.endpoints = &spk_l_endpoint,
+		.name_prefix = "tas2783-1"
+	},
+	{
+		.adr = 0x0000390102000001ull,
+		.num_endpoints = 1,
+		.endpoints = &spk_r_endpoint,
+		.name_prefix = "tas2783-2"
+	}
+};
+
+static const struct snd_soc_acpi_link_adr tas2783_link0[] = {
+	{
+		.mask = BIT(0),
+		.num_adr = ARRAY_SIZE(tas2783_0_adr),
+		.adr_d = tas2783_0_adr,
+	},
+	{}
+};
+
 static const struct snd_soc_acpi_link_adr cs42l42_link0_max98363_link2[] = {
 	/* Expected order: jack -> amp */
 	{
@@ -1080,6 +1104,12 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_mtl_sdw_machines[] = {
 		.drv_name = "sof_sdw",
 		.sof_tplg_filename = "sof-mtl-rt715-rt711-rt1308-mono.tplg",
 	},
+	{
+		.link_mask = BIT(0),
+		.links = tas2783_link0,
+		.drv_name = "sof_sdw",
+		.sof_tplg_filename = "sof-mtl-tas2783.tplg",
+	},
 	{
 		.link_mask = GENMASK(3, 0),
 		.links = mtl_rt713_l0_rt1316_l12_rt1713_l3,
Signature · 1 line
2.25.1
#4 lore raw
In reply to Niranjan H Y
kernel test robot noticed the following build errors:

Hi Niranjan,

kernel test robot noticed the following build errors:

[auto build test ERROR on broonie-sound/for-next]
[also build test ERROR on linus/master v6.17-rc5 next-20250909] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Niranjan-H-Y/ASoc-tas2783A-machine-driver-amp-utility-for-TI-devices/20250909-201553
base:   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
patch link:    https://lore.kernel.org/r/20250901051144.1112-1-niranjan.hy%40ti.com
patch subject: [PATCH v2 1/4] ASoc: tas2783A: Add soundwire based codec driver
config: hexagon-randconfig-002-20250910 (https://download.01.org/0day-ci/archive/20250910/[email protected]/config)
compiler: clang version 22.0.0git (https://github.com/llvm/llvm-project 7fb1dc08d2f025aad5777bb779dfac1197e9ef87)
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250910/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

>> sound/soc/codecs/tas2783-sdw.c:791:8: error: incompatible pointer types passing 'size_t *' (aka 'unsigned int *') to parameter of type 'unsigned long *' [-Werror,-Wincompatible-pointer-types]
     791 |                                           &size, NULL);
         |                                           ^~~~~

1 error generated.

vim +791 sound/soc/codecs/tas2783-sdw.c

769
770 static s32 tas2783_update_calibdata(struct tas2783_prv *tas_dev)
771 {
772 efi_guid_t efi_guid = TAS2783_CALI_GUID;
773 u32 attr, i, *tmp_val;
774 size_t size;
775 s32 ret;
776 efi_status_t status;
777 static efi_char16_t efi_names[][32] = {
778 L"SmartAmpCalibrationData", L"CALI_DATA"};
779
780 tmp_val = (u32 *)tas_dev->cali_data.data;
781 attr = 0;
782 i = 0;
783
784 /*
785 * In some cases, the calibration is performed in Windows,
786 * and data was saved in UEFI. Linux can access it.
787 */
788 for (i = 0; i < ARRAY_SIZE(efi_names); i++) {
789 size = 0;
790 status = efi.get_variable(efi_names[i], &efi_guid, &attr,

 > 791						  &size, NULL);

792 if (size > TAS2783_CALIB_DATA_SZ) {
793 dev_err(tas_dev->dev, "cali data too large\n");
794 break;
795 }
796
797 tas_dev->cali_data.read_sz = size;
798 if (status == EFI_BUFFER_TOO_SMALL) {
799 status = efi.get_variable(efi_names[i], &efi_guid, &attr,
800 &tas_dev->cali_data.read_sz,
801 tas_dev->cali_data.data);
802 dev_dbg(tas_dev->dev, "cali get %lu bytes result:%ld\n",
803 tas_dev->cali_data.read_sz, status);
804 }
805 if (status == EFI_SUCCESS)
806 break;
807 }
808
809 if (status != EFI_SUCCESS) {
810 /* Failed got calibration data from EFI. */
811 dev_dbg(tas_dev->dev, "No calibration data in UEFI.");
812 return 0;
813 }
814
815 mutex_lock(&tas_dev->calib_lock);
816 ret = tas2783_validate_calibdata(tas_dev, tas_dev->cali_data.data,
817 tas_dev->cali_data.read_sz);
818 if (!ret)
819 tas2783_set_calib_params_to_device(tas_dev, tmp_val);
820 mutex_unlock(&tas_dev->calib_lock);
821
822 return ret;
823 }
824

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki