Add thermal sensors support for MT7981
Subsystems (2)
v5 cover Add thermal sensors support for MT7981
This patch adds support for the temperature sensor in the MT7981 SoC. This sensor is exactly the same as the one in the MT7986.
Changes in v5:
- dropped another accepted patch
Changes in v4:
- sorted bindings by fallback names
- dropped accepted patch
Changes in v3:
- added fallback in bindings
Changes in v2:
- added fallback to an existing compatible string
- removed second patch as obsolete
Aleksander Jan Bajkowski (1):
arm64: dts: mediatek: add thermal sensor support on mt7981
arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 31 ++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)
Signature · 1 line
2.47.3
PATCH v5 1/1 arm64: dts: mediatek: add thermal sensor support on mt7981
The temperature sensor in the MT7981 is same as in the MT7986.
--- arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 31 ++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/mediatek/mt7981b.dtsi +30 -1
@@ -76,7 +76,7 @@ watchdog: watchdog@1001c000 { #reset-cells = <1>; }; - clock-controller@1001e000 { + apmixedsys: clock-controller@1001e000 { compatible = "mediatek,mt7981-apmixedsys"; reg = <0 0x1001e000 0 0x1000>; #clock-cells = <1>;
@@ -184,6 +184,31 @@ spi@1100b000 { status = "disabled"; }; + thermal@1100c800 { + compatible = "mediatek,mt7981-thermal", + "mediatek,mt7986-thermal"; + reg = <0 0x1100c800 0 0x800>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_THERM_CK>, + <&infracfg CLK_INFRA_ADC_26M_CK>; + clock-names = "therm", "auxadc"; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + #thermal-sensor-cells = <1>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; + + auxadc: adc@1100d000 { + compatible = "mediatek,mt7981-auxadc", + "mediatek,mt7986-auxadc"; + reg = <0 0x1100d000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_ADC_26M_CK>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + pio: pinctrl@11d00000 { compatible = "mediatek,mt7981-pinctrl"; reg = <0 0x11d00000 0 0x1000>,
@@ -211,6 +236,10 @@ efuse@11f20000 { reg = <0 0x11f20000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + + thermal_calibration: thermal-calib@274 { + reg = <0x274 0xc>; + }; }; clock-controller@15000000 {
Signature · 1 line
2.47.3
Re: [PATCH v5 1/1] arm64: dts: mediatek: add thermal sensor support on mt7981
Il 07/09/25 13:15, Aleksander Jan Bajkowski ha scritto:
Quoted 3 lines
The temperature sensor in the MT7981 is same as in the MT7986.
Signed-off-by Aleksander Jan Bajkowski <[email protected]>
Re: [PATCH v5 1/1] arm64: dts: mediatek: add thermal sensor support on mt7981
In reply to Aleksander Jan BajkowskiQuoted 3 lines · Aleksander Jan Bajkowski
The temperature sensor in the MT7981 is same as in the MT7986.
Signed-off-by Aleksander Jan Bajkowski <[email protected]>
Queued, thanks.
Matthias
Quoted 60 lines
--- arch/arm64/boot/dts/mediatek/mt7981b.dtsi | 31 ++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-)arch/arm64/boot/dts/mediatek/mt7981b.dtsi +30
-1@@ -76,7 +76,7 @@ watchdog: watchdog@1001c000 { #reset-cells = <1>; }; - clock-controller@1001e000 { + apmixedsys: clock-controller@1001e000 { compatible = "mediatek,mt7981-apmixedsys"; reg = <0 0x1001e000 0 0x1000>; #clock-cells = <1>;@@ -184,6 +184,31 @@ spi@1100b000 { status = "disabled"; }; + thermal@1100c800 { + compatible = "mediatek,mt7981-thermal", + "mediatek,mt7986-thermal"; + reg = <0 0x1100c800 0 0x800>; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&infracfg CLK_INFRA_THERM_CK>, + <&infracfg CLK_INFRA_ADC_26M_CK>; + clock-names = "therm", "auxadc"; + nvmem-cells = <&thermal_calibration>; + nvmem-cell-names = "calibration-data"; + #thermal-sensor-cells = <1>; + mediatek,auxadc = <&auxadc>; + mediatek,apmixedsys = <&apmixedsys>; + }; + + auxadc: adc@1100d000 { + compatible = "mediatek,mt7981-auxadc", + "mediatek,mt7986-auxadc"; + reg = <0 0x1100d000 0 0x1000>; + clocks = <&infracfg CLK_INFRA_ADC_26M_CK>; + clock-names = "main"; + #io-channel-cells = <1>; + status = "disabled"; + }; + pio: pinctrl@11d00000 { compatible = "mediatek,mt7981-pinctrl"; reg = <0 0x11d00000 0 0x1000>,@@ -211,6 +236,10 @@ efuse@11f20000 { reg = <0 0x11f20000 0 0x1000>; #address-cells = <1>; #size-cells = <1>; + + thermal_calibration: thermal-calib@274 { + reg = <0x274 0xc>; + }; }; clock-controller@15000000 {