Skip to contentSkip to conversation

dt-bindings: arm: cpus: Document pu-supply

PATCH Applied Fabio Estevam 4 participants 4 messages Sep 7, 2025 – Sep 9, 2025 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 dt-bindings: arm: cpus: Document pu-supply

The i.MX6Q Reference Manual describes the three digital LDO regulators as follows:

"10.4.1.1.1
Digital LDO Regulators
The integrated PMU includes three digital LDO regulators: LDO_ARM, LDO_PU, and LDO_SOC. These regulators provide power to the ARM_Core power domain, the combined VPU, IPU and GPU power domain, and the rest of the SoC logic (except always-ON SNVS domain)."

imx6dl.dtsi uses the correct names to describe these supplies:

arm-supply = <&reg_arm>;
pu-supply = <&reg_pu>;
soc-supply = <&reg_soc>;

'arm-supply' and 'soc-supply' are already documented, but 'pu-supply' is not.

Document the 'pu-supply' property and set it to deprecated.

This fixes the following dt-schema warning:

cpu@1 (arm,cortex-a9): Unevaluated properties are not allowed ('pu-supply' was unexpected)

---
Changes since v1:
- Explain that PU is a valid name. (Krzysztof)

 Documentation/devicetree/bindings/arm/cpus.yaml | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/arm/cpus.yaml +4 -0
index 4f1906d9fa68..c8a72fd02530 100644
@@ -350,6 +350,10 @@ properties:
     deprecated: true
     description: Use 'cpu-supply' instead
 
+  pu-supply:
+    deprecated: true
+    description: Only for i.MX6Q/DL/SL SoCs.
+
   soc-supply:
     deprecated: true
     description: Only for i.MX6/7 Soc.
Signature · 1 line
2.34.1
Reviewed-by on v2 1/1
#1 lore raw
Quoted 20 lines · Fabio Estevam

The i.MX6Q Reference Manual describes the three digital LDO regulators as follows:

"10.4.1.1.1
Digital LDO Regulators
The integrated PMU includes three digital LDO regulators: LDO_ARM, LDO_PU, and LDO_SOC. These regulators provide power to the ARM_Core power domain, the combined VPU, IPU and GPU power domain, and the rest of the SoC logic (except always-ON SNVS domain)."

imx6dl.dtsi uses the correct names to describe these supplies:

arm-supply = <&reg_arm>;
pu-supply = <&reg_pu>;
soc-supply = <&reg_soc>;

'arm-supply' and 'soc-supply' are already documented, but 'pu-supply' is not.

Document the 'pu-supply' property and set it to deprecated.

Quoted 8 lines

This fixes the following dt-schema warning:

cpu@1 (arm,cortex-a9): Unevaluated properties are not allowed ('pu-supply' was unexpected)

---
Changes since v1:
- Explain that PU is a valid name. (Krzysztof)

Best regards,
Krzysztof

Reviewed-by on v2 1/1
#2 lore raw
In reply to Fabio Estevam
Quoted 18 lines · Fabio Estevam

The i.MX6Q Reference Manual describes the three digital LDO regulators as follows:

"10.4.1.1.1
Digital LDO Regulators
The integrated PMU includes three digital LDO regulators: LDO_ARM, LDO_PU, and LDO_SOC. These regulators provide power to the ARM_Core power domain, the combined VPU, IPU and GPU power domain, and the rest of the SoC logic (except always-ON SNVS domain)."

imx6dl.dtsi uses the correct names to describe these supplies:

arm-supply = <&reg_arm>;
pu-supply = <&reg_pu>;
soc-supply = <&reg_soc>;

'arm-supply' and 'soc-supply' are already documented, but 'pu-supply' is not.

Quoted 7 lines

Document the 'pu-supply' property and set it to deprecated.

This fixes the following dt-schema warning:

cpu@1 (arm,cortex-a9): Unevaluated properties are not allowed ('pu-supply' was unexpected)

Quoted 25 lines

---
Changes since v1:
- Explain that PU is a valid name. (Krzysztof)

 Documentation/devicetree/bindings/arm/cpus.yaml | 4 ++++
 1 file changed, 4 insertions(+)
Documentation/devicetree/bindings/arm/cpus.yaml +4 -1
index 4f1906d9fa68..c8a72fd02530 100644
@@ -350,6 +350,10 @@ properties:
     deprecated: true
     description: Use 'cpu-supply' instead
 
+  pu-supply:
+    deprecated: true
+    description: Only for i.MX6Q/DL/SL SoCs.
+
   soc-supply:
     deprecated: true
     description: Only for i.MX6/7 Soc.
--

2.34.1

maintainer Applied
#3 lore raw
In reply to Fabio Estevam
Quoted 24 lines · Fabio Estevam

The i.MX6Q Reference Manual describes the three digital LDO regulators as follows:

"10.4.1.1.1
Digital LDO Regulators
The integrated PMU includes three digital LDO regulators: LDO_ARM, LDO_PU, and LDO_SOC. These regulators provide power to the ARM_Core power domain, the combined VPU, IPU and GPU power domain, and the rest of the SoC logic (except always-ON SNVS domain)."

imx6dl.dtsi uses the correct names to describe these supplies:

arm-supply = <&reg_arm>;
pu-supply = <&reg_pu>;
soc-supply = <&reg_soc>;

'arm-supply' and 'soc-supply' are already documented, but 'pu-supply' is not.

Document the 'pu-supply' property and set it to deprecated.

This fixes the following dt-schema warning:

cpu@1 (arm,cortex-a9): Unevaluated properties are not allowed ('pu-supply' was unexpected)

Quoted 8 lines

---
Changes since v1:
- Explain that PU is a valid name. (Krzysztof)

 Documentation/devicetree/bindings/arm/cpus.yaml | 4 ++++
 1 file changed, 4 insertions(+)

Applied, thanks!