Initial support for Qualcomm Hamoa IOT EVK board
v10 cover Initial support for Qualcomm Hamoa IOT EVK board
Introduce the device tree, DT bindings, and driver modifications required to bring up the HAMOA-IOT-EVK evaluation board—based on the X1E80100 SoC—to a UART shell.
This patch set focuses on two key hardware components: the HAMOA-IOT-SOM and the HAMOA-IOT-EVK carrier board.
The HAMOA-IOT-SOM is a compact System on Module that integrates the SoC, GPIOs, and PMICs. It is designed to be modular and can be paired with various carrier boards to support different use cases.
The HAMOA-IOT-EVK is one such carrier board, designed for IoT scenarios. It provides essential peripherals such as UART, on-board PMICs, and USB-related components.
Together, these components form a flexible and scalable platform, and this patch set enables their initial bring-up through proper device tree configuration and driver support.
Qualcomm SoCs often have multiple product variants, each identified by a different SoC ID. For instance, the x1e80100 SoC has closely related variants such as x1e78100 and x1e001de. This diversity in SoC identifiers can lead to confusion and unnecessary maintenance complexity in the device tree and related subsystems.
To address this, code names offer a more consistent and project-agnostic way to represent SoC families. They tend to remain stable across development efforts.
This patch series introduces "hamoa" as the codename for the x1e80100 SoC. Going forward, all x1e80100-related variants—including x1e81000 and others in the same family—will be represented under the "hamoa" designation in the device tree.
This improves readability, streamlines future maintenance, and aligns with common naming practices across Qualcomm-based platforms.
Features added and enabled:
- UART
- On-board regulators
- Regulators on the SOM
- PMIC GLINK
- USB0 through USB6 and their PHYs
- Embedded USB (eUSB) repeaters
- USB Type-C mux
- PCIe6a and its PHY
- PCIe4 and its PHY
- Reserved memory regions
- Pinctrl
- NVMe
- ADSP, CDSP
- WLAN, Bluetooth (M.2 interface)
- USB DisplayPort
- Graphic
- Audio
- Video
Depends on the following change to ensure compliance with the Device Tree schema:
https://lore.kernel.org/linux-arm-msm/[email protected]/
---
Changes in v10:
- Update the commit description.
- Remove the redundant space in 'stdout-path'.
- Move GPU nodes to the SoM's .dtsi file.
- Integrate the changes that enable video support into this patch series.
- Link to v9: https://lore.kernel.org/r/[email protected]
Changes in v9:
- Sort the nodes within the root node in alphabetical order.
- Add WLAN control pin to the PMU.
- Link to v8: https://lore.kernel.org/r/[email protected]
Changes in v8:
- Change the style of how collaborators are listed.
- Link to v7: https://lore.kernel.org/r/[email protected]
Changes in v7:
- Configure the EDP regulator to boot-on.
- Change back to a year‑less copyright statement.
- Update base commit.
- Link to v6: https://lore.kernel.org/r/[email protected]
Changes in v6:
- Restore the full change log for each revision.
- Merge the changes related to Audio and Graphics into the patch series.
- Link to v5: https://lore.kernel.org/r/[email protected]
Changes in v5:
- Update base commit.
- Drop an already merged patch:
https://lore.kernel.org/all/[email protected]/
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- Update commit messages.
- Update base commit.
- Update the format of the node mdss_dp3_out.
- Add comments to clarify certain nodes.
- Update the configuration of regulator-wcn-3p3 from regulator-boot-on to regulator-always-on.
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Add compatible string and dt-bindings for SOM.
- Restore PMU-related regulators to comply with dt-binding rules and enable kernel-level power management.
- Adjust commit description accordingly.
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Merge the compatible rules and remove the compatible string map.
- Align the ADSP and CDSP firmware paths with other x1e80100 platforms.
- Remove the regulators on the M.2 card, as well as those managed by UEFI on this board.
- Merge another patch series that enables USB DisplayPort functionality on this platform: https://lore.kernel.org/all/[email protected]/
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Wangao Wang (1):
arm64: dts: qcom: x1e80100: add video node
Yijie Yang (3):
dt-bindings: arm: qcom: Document HAMOA-IOT-EVK board
arm64: dts: qcom: Add HAMOA-IOT-SOM platform
arm64: dts: qcom: Add base HAMOA-IOT-EVK board
Documentation/devicetree/bindings/arm/qcom.yaml | 6 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 1240 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 621 ++++++++++++ arch/arm64/boot/dts/qcom/x1e80100.dtsi | 82 ++ 5 files changed, 1950 insertions(+)
---
base-commit: b899981540841e409e496083921f2e5c4c209925
change-id: 20250604-hamoa_initial-0cd7036d7271
prerequisite-message-id: <[email protected]>
prerequisite-patch-id: 037bb113706198fca6a87000e46907bc23f9d7e2
Best regards,
Signature · 1 line
Yijie Yang <[email protected]>
PATCH v10 1/4 dt-bindings: arm: qcom: Document HAMOA-IOT-EVK board
Document the device tree binding for the HAMOA-IOT-EVK board, which uses the Qualcomm X1E80100 SoC.
The EVK consists of a carrier board and a modular System-on-Module (SoM). The SoM integrates the SoC, PMICs, and essential GPIOs, while the EVK carrier board provides additional peripherals such as UART and USB interfaces.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++ 1 file changed, 6 insertions(+)
Documentation/devicetree/bindings/arm/qcom.yaml +6 -0
@@ -1069,6 +1069,12 @@ properties: - qcom,x1e80100-qcp - const: qcom,x1e80100 + - items: + - enum: + - qcom,hamoa-iot-evk + - const: qcom,hamoa-iot-som + - const: qcom,x1e80100 + - items: - enum: - asus,zenbook-a14-ux3407qa
Signature · 1 line
2.34.1
PATCH v10 2/4 arm64: dts: qcom: x1e80100: add video node
In reply to Yijie YangFrom: Wangao Wang <[email protected]>
Add the IRIS video-codec node on X1E80100 platform to support video functionality.
--- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 82 ++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+)
arch/arm64/boot/dts/qcom/x1e80100.dtsi +82 -0
@@ -5183,6 +5183,88 @@ usb_1_ss1_dwc3_ss: endpoint { }; }; + iris: video-codec@aa00000 { + compatible = "qcom,x1e80100-iris", "qcom,sm8550-iris"; + + reg = <0x0 0x0aa00000 0x0 0xf0000>; + interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>; + + power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>, + <&videocc VIDEO_CC_MVS0_GDSC>, + <&rpmhpd RPMHPD_MXC>, + <&rpmhpd RPMHPD_MMCX>; + power-domain-names = "venus", + "vcodec0", + "mxc", + "mmcx"; + operating-points-v2 = <&iris_opp_table>; + + clocks = <&gcc GCC_VIDEO_AXI0_CLK>, + <&videocc VIDEO_CC_MVS0C_CLK>, + <&videocc VIDEO_CC_MVS0_CLK>; + clock-names = "iface", + "core", + "vcodec0_core"; + + interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY + &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>, + <&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + interconnect-names = "cpu-cfg", + "video-mem"; + + memory-region = <&video_mem>; + + resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>; + reset-names = "bus"; + + iommus = <&apps_smmu 0x1940 0x0>, + <&apps_smmu 0x1947 0x0>; + dma-coherent; + + status = "disabled"; + + iris_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-192000000 { + opp-hz = /bits/ 64 <192000000>; + required-opps = <&rpmhpd_opp_low_svs_d1>, + <&rpmhpd_opp_low_svs_d1>; + }; + + opp-240000000 { + opp-hz = /bits/ 64 <240000000>; + required-opps = <&rpmhpd_opp_low_svs>, + <&rpmhpd_opp_low_svs>; + }; + + opp-338000000 { + opp-hz = /bits/ 64 <338000000>; + required-opps = <&rpmhpd_opp_svs>, + <&rpmhpd_opp_svs>; + }; + + opp-366000000 { + opp-hz = /bits/ 64 <366000000>; + required-opps = <&rpmhpd_opp_svs_l1>, + <&rpmhpd_opp_svs_l1>; + }; + + opp-444000000 { + opp-hz = /bits/ 64 <444000000>; + required-opps = <&rpmhpd_opp_nom>, + <&rpmhpd_opp_nom>; + }; + + opp-481000000 { + opp-hz = /bits/ 64 <481000000>; + required-opps = <&rpmhpd_opp_turbo>, + <&rpmhpd_opp_turbo>; + }; + }; + }; + videocc: clock-controller@aaf0000 { compatible = "qcom,x1e80100-videocc"; reg = <0 0x0aaf0000 0 0x10000>;
Signature · 1 line
2.34.1
Re: [PATCH v10 2/4] arm64: dts: qcom: x1e80100: add video node
Quoted 7 lines · YijieYang
From: Wangao Wang <[email protected]>
Add the IRIS video-codec node on X1E80100 platform to support video functionality.
Signed-off-by Wangao Wang <[email protected]>---
Konrad
PATCH v10 3/4 arm64: dts: qcom: Add HAMOA-IOT-SOM platform
In reply to Yijie YangThe HAMOA-IOT-SOM is a compact computing module that integrates a System on Chip (SoC) — specifically the x1e80100 — along with essential components optimized for IoT applications. It is designed to be mounted on carrier boards, enabling the development of complete embedded systems.
Make the following peripherals on the SOM enabled:
- Regulators on the SOM
- Reserved memory regions
- PCIe6a and its PHY
- PCIe4 and its PHY
- USB0 through USB6 and their PHYs
- ADSP, CDSP
- Graphic
- Video
Written in collaboration with Yingying Tang (PCIe4) <[email protected]> and Wangao Wang (Video) <[email protected]>.
--- arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi | 621 ++++++++++++++++++++++++++++ 1 file changed, 621 insertions(+)
arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi new file +621 -0
@@ -0,0 +1,621 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ + +#include "x1e80100.dtsi" +#include "x1e80100-pmics.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +/ { + compatible = "hamoa-iot-som", "qcom,x1e80100"; + + reserved-memory { + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; +}; + +&apps_rsc { + /* PMC8380C_B */ + regulators-0 { + compatible = "qcom,pm8550-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob1-supply = <&vph_pwr>; + vdd-bob2-supply = <&vph_pwr>; + vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>; + vdd-l2-l13-l14-supply = <&vreg_bob1>; + vdd-l5-l16-supply = <&vreg_bob1>; + vdd-l6-l7-supply = <&vreg_bob2>; + vdd-l8-l9-supply = <&vreg_bob1>; + vdd-l12-supply = <&vreg_s5j_1p2>; + vdd-l15-supply = <&vreg_s4c_1p8>; + vdd-l17-supply = <&vreg_bob2>; + + vreg_bob1: bob1 { + regulator-name = "vreg_bob1"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob2: bob2 { + regulator-name = "vreg_bob2"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1b_1p8: ldo1 { + regulator-name = "vreg_l1b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2b_3p0: ldo2 { + regulator-name = "vreg_l2b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4b_1p8: ldo4 { + regulator-name = "vreg_l4b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l5b_3p0: ldo5 { + regulator-name = "vreg_l5b_3p0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b_1p8: ldo6 { + regulator-name = "vreg_l6b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7b_2p8: ldo7 { + regulator-name = "vreg_l7b_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8b_3p0: ldo8 { + regulator-name = "vreg_l8b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9b_2p9: ldo9 { + regulator-name = "vreg_l9b_2p9"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10b_1p8: ldo10 { + regulator-name = "vreg_l10b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12b_1p2: ldo12 { + regulator-name = "vreg_l12b_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l13b_3p0: ldo13 { + regulator-name = "vreg_l13b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l14b_3p0: ldo14 { + regulator-name = "vreg_l14b_3p0"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l15b_1p8: ldo15 { + regulator-name = "vreg_l15b_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l16b_2p9: ldo16 { + regulator-name = "vreg_l16b_2p9"; + regulator-min-microvolt = <2912000>; + regulator-max-microvolt = <2912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l17b_2p5: ldo17 { + regulator-name = "vreg_l17b_2p5"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380VE_C */ + regulators-1 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s4c_1p8: smps4 { + regulator-name = "vreg_s4c_1p8"; + regulator-min-microvolt = <1856000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1c_1p2: ldo1 { + regulator-name = "vreg_l1c_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2c_0p8: ldo2 { + regulator-name = "vreg_l2c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3c_0p8: ldo3 { + regulator-name = "vreg_l3c_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380_D */ + regulators-2 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s4c_1p8>; + vdd-s1-supply = <&vph_pwr>; + + vreg_l1d_0p8: ldo1 { + regulator-name = "vreg_l1d_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2d_0p9: ldo2 { + regulator-name = "vreg_l2d_0p9"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d_1p8: ldo3 { + regulator-name = "vreg_l3d_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380_E */ + regulators-3 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "e"; + + vdd-l2-supply = <&vreg_s1f_0p7>; + vdd-l3-supply = <&vreg_s5j_1p2>; + + vreg_l2e_0p8: ldo2 { + regulator-name = "vreg_l2e_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3e_1p2: ldo3 { + regulator-name = "vreg_l3e_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380_F */ + regulators-4 { + compatible = "qcom,pmc8380-rpmh-regulators"; + qcom,pmic-id = "f"; + + vdd-l1-supply = <&vreg_s5j_1p2>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s5j_1p2>; + vdd-s1-supply = <&vph_pwr>; + + vreg_s1f_0p7: smps1 { + regulator-name = "vreg_s1f_0p7"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1f_1p0: ldo1 { + regulator-name = "vreg_l1f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2f_1p0: ldo2 { + regulator-name = "vreg_l2f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3f_1p0: ldo3 { + regulator-name = "vreg_l3f_1p0"; + regulator-min-microvolt = <1024000>; + regulator-max-microvolt = <1024000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380VE_I */ + regulators-6 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "i"; + + vdd-l1-supply = <&vreg_s4c_1p8>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + + vreg_s1i_0p9: smps1 { + regulator-name = "vreg_s1i_0p9"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_s2i_1p0: smps2 { + regulator-name = "vreg_s2i_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1i_1p8: ldo1 { + regulator-name = "vreg_l1i_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2i_1p2: ldo2 { + regulator-name = "vreg_l2i_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3i_0p8: ldo3 { + regulator-name = "vreg_l3i_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; + + /* PMC8380VE_J */ + regulators-7 { + compatible = "qcom,pm8550ve-rpmh-regulators"; + qcom,pmic-id = "j"; + + vdd-l1-supply = <&vreg_s1f_0p7>; + vdd-l2-supply = <&vreg_s5j_1p2>; + vdd-l3-supply = <&vreg_s1f_0p7>; + vdd-s5-supply = <&vph_pwr>; + + vreg_s5j_1p2: smps5 { + regulator-name = "vreg_s5j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l1j_0p8: ldo1 { + regulator-name = "vreg_l1j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l2j_1p2: ldo2 { + regulator-name = "vreg_l2j_1p2"; + regulator-min-microvolt = <1256000>; + regulator-max-microvolt = <1256000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3j_0p8: ldo3 { + regulator-name = "vreg_l3j_0p8"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <920000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&iris { + status = "okay"; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/x1e80100/gen70500_zap.mbn"; +}; + +&pcie4 { + perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie4_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l3i_0p8>; + vdda-pll-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&pcie6a { + perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&pcie6a_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pcie6a_phy { + vdda-phy-supply = <&vreg_l1d_0p8>; + vdda-pll-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&qupv3_0 { + status = "okay"; +}; + +&qupv3_1 { + status = "okay"; +}; + +&qupv3_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/x1e80100/adsp.mbn", + "qcom/x1e80100/adsp_dtb.mbn"; + + status = "okay"; +}; + +&remoteproc_cdsp { + firmware-name = "qcom/x1e80100/cdsp.mbn", + "qcom/x1e80100/cdsp_dtb.mbn"; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <34 2>, /* TPM LP & INT */ + <44 4>; /* SPI (TPM) */ + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio147"; + function = "pcie4_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio146"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie6a_default: pcie6a-default-state { + clkreq-n-pins { + pins = "gpio153"; + function = "pcie6a_clk"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio152"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio154"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + + }; + }; +}; + +&usb_1_ss0 { + status = "okay"; +}; + +&usb_1_ss0_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_ss0_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&usb_1_ss0_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l1j_0p8>; + + status = "okay"; +}; + +&usb_1_ss1 { + status = "okay"; +}; + +&usb_1_ss1_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_ss1_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&usb_1_ss1_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_1_ss2 { + status = "okay"; +}; + +&usb_1_ss2_dwc3 { + dr_mode = "otg"; + usb-role-switch; +}; + +&usb_1_ss2_hsphy { + vdd-supply = <&vreg_l3j_0p8>; + vdda12-supply = <&vreg_l2j_1p2>; + + status = "okay"; +}; + +&usb_1_ss2_qmpphy { + vdda-phy-supply = <&vreg_l2j_1p2>; + vdda-pll-supply = <&vreg_l2d_0p9>; + + status = "okay"; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + +&usb_2_hsphy { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp { + status = "okay"; +}; + +&usb_mp_hsphy0 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_hsphy1 { + vdd-supply = <&vreg_l2e_0p8>; + vdda12-supply = <&vreg_l3e_1p2>; + + status = "okay"; +}; + +&usb_mp_qmpphy0 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +}; + +&usb_mp_qmpphy1 { + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3c_0p8>; + + status = "okay"; +};
Signature · 1 line
2.34.1
PATCH v10 4/4 arm64: dts: qcom: Add base HAMOA-IOT-EVK board
In reply to Yijie YangThe HAMOA-IOT-EVK is an evaluation platform for IoT products, composed of the Hamoa IoT SoM and a carrier board. Together, they form a complete embedded system capable of booting to UART.
Make the following peripherals on the carrier board enabled:
- UART
- On-board regulators
- USB Type-C mux
- Pinctrl
- Embedded USB (EUSB) repeaters
- NVMe
- pmic-glink
- USB DisplayPorts
- Bluetooth
- WLAN
- Audio
Written in collaboration with Quill Qi (Audio) <[email protected]>, Jie Zhang (Graphics) <[email protected]>, Shuai Zhang (Bluetooth) <[email protected]>, Yingying Tang (WLAN) <[email protected]>, and Yongxing Mou (USB DisplayPorts) <[email protected]>.
--- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts | 1240 ++++++++++++++++++++++++++++ 2 files changed, 1241 insertions(+)
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb +dtb-$(CONFIG_ARCH_QCOM) += hamoa-iot-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5018-rdp432-c2.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5018-tplink-archer-ax55-v1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq5332-rdp441.dtb
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts new file +1240 -0
1,240 lines not on this page · raw message
Signature · 1 line
2.34.1
Re: [PATCH v10 4/4] arm64: dts: qcom: Add base HAMOA-IOT-EVK board
Quoted 24 lines · Yijie Yang
The HAMOA-IOT-EVK is an evaluation platform for IoT products, composed of the Hamoa IoT SoM and a carrier board. Together, they form a complete embedded system capable of booting to UART.
Make the following peripherals on the carrier board enabled:
- UART
- On-board regulators
- USB Type-C mux
- Pinctrl
- Embedded USB (EUSB) repeaters
- NVMe
- pmic-glink
- USB DisplayPorts
- Bluetooth
- WLAN
- AudioWritten in collaboration with Quill Qi (Audio) <[email protected]>, Jie Zhang (Graphics) <[email protected]>, Shuai Zhang (Bluetooth) <[email protected]>, Yingying Tang (WLAN) <[email protected]>, and Yongxing Mou (USB DisplayPorts) <[email protected]>.
Signed-off-by Yijie Yang <[email protected]>---
[...]
Quoted 25 lines
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts new file +25
-0+ sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-EVK"; + audio-routing = "WooferLeft IN", + "WSA WSA_SPK1 OUT", + "TweeterLeft IN", + "WSA WSA_SPK2 OUT", + "WooferRight IN", + "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", + "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", + "HPHL_OUT", + "IN2_HPHR", + "HPHR_OUT", + "AMIC2", + "MIC BIAS2", + "VA DMIC0", + "MIC BIAS3", + "VA DMIC1", + "MIC BIAS3", + "VA DMIC2", + "MIC BIAS1", + "VA DMIC3", + "MIC BIAS1",
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts line 450
Quoted 10 lines
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts new file +10
-0+ "VA DMIC0", + "VA MIC BIAS3", + "VA DMIC1", + "VA MIC BIAS3", + "VA DMIC2", + "VA MIC BIAS1", + "VA DMIC3", + "VA MIC BIAS1", + "TX SWR_INPUT1", + "ADC2_OUTPUT";
It's good to write these entries in pairs, as that's what they correspond to.
Please also take a look at this commit:b49e37de8e70 ("arm64: dts: qcom: x1e80100-crd: Drop duplicate DMIC supplies")
[...]
Review
Quoted 3 lines
+&i2c5 {
(quoted diff) +2
-0+ clock-frequency = <400000>; + status = "okay";
A '\n' before status is customary
[...]
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts line 1240
Quoted 7 lines
+&usb_mp_hsphy0 {
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts new file +6
-0+ phys = <&eusb6_repeater>; +}; + +&usb_mp_hsphy1 { + phys = <&eusb3_repeater>; +};
See:
Konrad
Re: [PATCH v10 4/4] arm64: dts: qcom: Add base HAMOA-IOT-EVK board
Quoted 67 lines · Konrad Dybcio
Quoted 24 lines · Yijie Yang
The HAMOA-IOT-EVK is an evaluation platform for IoT products, composed of the Hamoa IoT SoM and a carrier board. Together, they form a complete embedded system capable of booting to UART.
Make the following peripherals on the carrier board enabled:
- UART
- On-board regulators
- USB Type-C mux
- Pinctrl
- Embedded USB (EUSB) repeaters
- NVMe
- pmic-glink
- USB DisplayPorts
- Bluetooth
- WLAN
- AudioWritten in collaboration with Quill Qi (Audio) <[email protected]>, Jie Zhang (Graphics) <[email protected]>, Shuai Zhang (Bluetooth) <[email protected]>, Yingying Tang (WLAN) <[email protected]>, and Yongxing Mou (USB DisplayPorts) <[email protected]>.
Signed-off-by Yijie Yang <[email protected]>---
[...]
Quoted 25 lines
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts new file +25
-0+ sound { + compatible = "qcom,x1e80100-sndcard"; + model = "X1E80100-EVK"; + audio-routing = "WooferLeft IN", + "WSA WSA_SPK1 OUT", + "TweeterLeft IN", + "WSA WSA_SPK2 OUT", + "WooferRight IN", + "WSA2 WSA_SPK2 OUT", + "TweeterRight IN", + "WSA2 WSA_SPK2 OUT", + "IN1_HPHL", + "HPHL_OUT", + "IN2_HPHR", + "HPHR_OUT", + "AMIC2", + "MIC BIAS2", + "VA DMIC0", + "MIC BIAS3", + "VA DMIC1", + "MIC BIAS3", + "VA DMIC2", + "MIC BIAS1", + "VA DMIC3", + "MIC BIAS1",arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts line 450
Quoted 10 lines
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts new file +10
-0+ "VA DMIC0", + "VA MIC BIAS3", + "VA DMIC1", + "VA MIC BIAS3", + "VA DMIC2", + "VA MIC BIAS1", + "VA DMIC3", + "VA MIC BIAS1", + "TX SWR_INPUT1", + "ADC2_OUTPUT";It's good to write these entries in pairs, as that's what they correspond to.
Quoted 2 lines
Please also take a look at this commit:
b49e37de8e70("arm64: dts: qcom: x1e80100-crd: Drop duplicate DMIC supplies")
Will update.
Quoted 8 lines
[...]
Review
Quoted 3 lines
+&i2c5 {
(quoted diff) +2
-0+ clock-frequency = <400000>; + status = "okay";A '\n' before status is customary
Will update.
Quoted 13 lines
[...]
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts line 1240
Quoted 7 lines
+&usb_mp_hsphy0 {
arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts new file +6
-0+ phys = <&eusb6_repeater>; +}; + +&usb_mp_hsphy1 { + phys = <&eusb3_repeater>; +};See:
Quoted 2 lines
Great reminder! I'll take care of it.
Quoted 1 line
Konrad
Signature · 2 lines
Best Regards, Yijie