drm/bridge: lontium-lt8912b: Do not generate HFP
PATCH 1/1 drm/bridge: lontium-lt8912b: Do not generate HFP
From: Max Krummenacher <[email protected]>
The datasheet of lontium-lt8912b doesn't require blanking during the HFP period. Thus use LP during HFP.
Tested with a samsung-dsim (i.MX8 MM) and a tc358768 DPI to DSI bridge as the DSI host.
---
drivers/gpu/drm/bridge/lontium-lt8912b.c | 1 + 1 file changed, 1 insertion(+)
drivers/gpu/drm/bridge/lontium-lt8912b.c +1 -0
@@ -494,6 +494,7 @@ static int lt8912_attach_dsi(struct lt8912 *lt) dsi->mode_flags =MIPI_DSI_MODE_VIDEO |MIPI_DSI_MODE_LPM | +MIPI_DSI_MODE_VIDEO_NO_HFP |MIPI_DSI_MODE_NO_EOT_PACKET ; ret =devm_mipi_dsi_attach (dev, dsi);
Signature · 1 line
2.42.0
Francesco Dolcini
maintainerHello all,
Quoted 9 lines · On Mon, Jul 28, 2025 at 05:00:50PM +0200, [email protected] wrote:
From: Max Krummenacher <[email protected]>
The datasheet of lontium-lt8912b doesn't require blanking during the HFP period. Thus use LP during HFP.
Tested with a samsung-dsim (i.MX8 MM) and a tc358768 DPI to DSI bridge as the DSI host.
Signed-off-by Max Krummenacher <[email protected]>
Just a gently ping on this
Francesco
Quoted 8 lines · Francesco Dolcini
Hello all,
Quoted 5 lines · On Mon, Jul 28, 2025 at 05:00:50PM +0200, [email protected] wrote:
From: Max Krummenacher <[email protected]>
The datasheet of lontium-lt8912b doesn't require blanking during the HFP period. Thus use LP during HFP.
Quoted 6 lines
Quoted 4 lines
Tested with a samsung-dsim (i.MX8 MM) and a tc358768 DPI to DSI bridge as the DSI host.
Signed-off-by Max Krummenacher <[email protected]>Just a gently ping on this
Any opinion on this?
Max
Quoted 2 lines
Francesco
Francesco Dolcini
maintainer+Dmitry, Luca
Hello all,
how to get this patch considered and eventually merged? I see that this is not moving since long.
Considering that Adrien Grassein is not visible on the mailing list since 2022, and that I have various HW available that is using this combination (on TI Sitara and Jacinto, on a DPI-DSI tc358768 bridge, and NXP i.MX), I have access to the (little) documentation that is available from Lontium I can propose myself as a maintainer here.
I assume being able to ack patches would help the maintenance here, or is this just a glitch and a ping was enough?
Dmitry, Luca: looking at the recent commits you are the one who merged the most patches on drivers/gpu/drm/bridge lately, what's you advise?
Francesco
Quoted 30 lines · On Mon, Jul 28, 2025 at 05:00:50PM +0200, [email protected] wrote:
From: Max Krummenacher <[email protected]>
The datasheet of lontium-lt8912b doesn't require blanking during the HFP period. Thus use LP during HFP.
Tested with a samsung-dsim (i.MX8 MM) and a tc358768 DPI to DSI bridge as the DSI host.
Signed-off-by Max Krummenacher <[email protected]>---
drivers/gpu/drm/bridge/lontium-lt8912b.c | 1 + 1 file changed, 1 insertion(+)drivers/gpu/drm/bridge/lontium-lt8912b.c +1
-0@@ -494,6 +494,7 @@ static int lt8912_attach_dsi(struct lt8912 *lt) dsi->mode_flags =MIPI_DSI_MODE_VIDEO |MIPI_DSI_MODE_LPM | +MIPI_DSI_MODE_VIDEO_NO_HFP |MIPI_DSI_MODE_NO_EOT_PACKET ; ret =devm_mipi_dsi_attach (dev, dsi);Signature · 1 line
2.42.0
Hi Francesco,
Quoted 11 lines · Francesco Dolcini
+Dmitry, Luca
Hello all,
how to get this patch considered and eventually merged? I see that this is not moving since long.Considering that Adrien Grassein is not visible on the mailing list since 2022, and that I have various HW available that is using this combination (on TI Sitara and Jacinto, on a DPI-DSI tc358768 bridge, and NXP i.MX), I have access to the (little) documentation that is available from Lontium I can propose myself as a maintainer here.
Thanks for volunteering! I am not a DRM maintainer, so I'll let others chime in, but I suspect you should just send a patch to add yourself to the MAINTAINERS entry and (as a separate patch?) remove Adrien, unless he speaks up by then.
Quoted 2 lines
I assume being able to ack patches would help the maintenance here, or is this just a glitch and a ping was enough?
dri-devel is flooded by patches, driver-specific ones will unavoidably be missed in lack of a responsive maintainer. So this is not a glitch, it's a frequent pattern I'm afraid.
As above, if you were in the MAINTAINERS entry, look at patches and comment on them, and test on hardware that would be great IMHO.
For this one patch: it looks OK.
Adding the "why" would be better, which I assume to be power saving. No need to sned a v2 just for that though.
I'm applying it in ~1 week. It would be good if you could check it still applies on drm-misc-next before that, report back if it does, send a v2 (adding the "why") if it doesn't.
Luca
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Hello Francesco and all;
Thank you for proposing yourself.
I have no time anymore to maintain this driver (and I don't have the setup anymore).
I totally agree with this proposal.
Thanks a lot,
Adrien
Quoted 48 lines · Luca Ceresoli
Hi Francesco,
Quoted 11 lines · Francesco Dolcini
+Dmitry, Luca
Hello all,
how to get this patch considered and eventually merged? I see that this is not moving since long.Considering that Adrien Grassein is not visible on the mailing list since 2022, and that I have various HW available that is using this combination (on TI Sitara and Jacinto, on a DPI-DSI tc358768 bridge, and NXP i.MX), I have access to the (little) documentation that is available from Lontium I can propose myself as a maintainer here.
Thanks for volunteering! I am not a DRM maintainer, so I'll let others chime in, but I suspect you should just send a patch to add yourself to the
MAINTAINERSentry and (as a separate patch?) remove Adrien, unless he speaks up by then.Quoted 2 lines
I assume being able to ack patches would help the maintenance here, or is this just a glitch and a ping was enough?
dri-devel is flooded by patches, driver-specific ones will unavoidably be missed in lack of a responsive maintainer. So this is not a glitch, it's a frequent pattern I'm afraid.
As above, if you were in the
MAINTAINERSentry, look at patches and comment on them, and test on hardware that would be great IMHO.For this one patch: it looks OK.
Reviewed-by Luca Ceresoli <[email protected]>Adding the "why" would be better, which I assume to be power saving. No need to sned a v2 just for that though.
I'm applying it in ~1 week. It would be good if you could check it still applies on drm-misc-next before that, report back if it does, send a v2 (adding the "why") if it doesn't.
Luca
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Francesco Dolcini
maintainerQuoted 15 lines · Luca Ceresoli
Hi Francesco,
Quoted 11 lines · Francesco Dolcini
+Dmitry, Luca
Hello all,
how to get this patch considered and eventually merged? I see that this is not moving since long.Considering that Adrien Grassein is not visible on the mailing list since 2022, and that I have various HW available that is using this combination (on TI Sitara and Jacinto, on a DPI-DSI tc358768 bridge, and NXP i.MX), I have access to the (little) documentation that is available from Lontium I can propose myself as a maintainer here.
Quoted 4 lines
Thanks for volunteering! I am not a DRM maintainer, so I'll let others chime in, but I suspect you should just send a patch to add yourself to the
MAINTAINERSentry and (as a separate patch?) remove Adrien, unless he speaks up by then.
Separate patch coming, thanks.
Quoted 2 lines
I'm applying it in ~1 week. It would be good if you could check it still applies on drm-misc-next before that, report back if it does
It applies cleanly.
Thanks!
Francesco
Quoted 8 lines · On Mon, 28 Jul 2025 17:00:50 +0200, [email protected] wrote:
The datasheet of lontium-lt8912b doesn't require blanking during the HFP period. Thus use LP during HFP.
Tested with a samsung-dsim (i.MX8 MM) and a tc358768 DPI to DSI bridge as the DSI host.
[...]
Applied, thanks!
[1/1] drm/bridge: lontium-lt8912b: Do not generate HFP
commit: 9a56caf49525e8a0ee349fb69db101d018a95a66
Best regards,
Signature · 1 line
Luca Ceresoli <[email protected]>