WHPX support for Arm
Subsystems (2)
v6 cover WHPX support for Arm
Link to branch: https://github.com/mediouni-m/qemu whpx (tag for this submission: whpx-v6)
Missing features:
- PSCI state sync with Hyper-V
- Interrupt controller save-restore
- SVE register sync
Known bugs:
- reboots when multiple cores are enabled are currently broken
Note:
"target/arm/kvm: add constants for new PSCI versions" taken from the mailing list.
"accel/system: Introduce hwaccel_enabled() helper" taken from the mailing list, added here as part of this series to make it compilable as a whole.
"hw/arm: virt: add GICv2m for the case when ITS is not available" present in both the HVF vGIC and this series.
Updates since v5:
- Rebasing
- Address review comments
- Rework ITS enablement to a tristate
- On x86: move away from deprecated APIs to get/set APIC state
Updates since v4:
- Taking into account review comments
- Add migration blocker in the vGICv3 code due to missing interrupt controller save/restore
- Debug register sync
Updates since v3:
- Disabling SVE on WHPX
- Taking into account review comments incl:
- fixing x86 support
- reduce the amount of __x86_64__ checks in common code to the minimum (winhvemulation) which can be reduced even further down the road.
- generalize get_physical_address_range into something common between hvf and whpx
Updates since v2:
- Fixed up a rebase screwup for whpx-internal.h
- Fixed ID_AA64ISAR1_EL1 and ID_AA64ISAR2_EL1 feature probe for -cpu host
- Switched to ID_AA64PFR1_EL1/ID_AA64DFR0_EL1 instead of their non-AA64 variant
Updates since v1:
- Shutdowns and reboots
- MPIDR_EL1 register sync
- Fixing GICD_TYPER_LPIS value
- IPA size clamping
- -cpu host now implemented
Mohamed Mediouni (21):
hw/arm: virt: add GICv2m for the case when ITS is not available
tests: data: update AArch64 ACPI tables
whpx: Move around files before introducing AArch64 support
whpx: reshuffle common code
whpx: ifdef out winhvemulation on non-x86_64
whpx: common: add WHPX_INTERCEPT_DEBUG_TRAPS define
hw, target, accel: whpx: change apic_in_platform to kernel_irqchip
whpx: interrupt controller support
whpx: add arm64 support
whpx: copy over memory management logic from hvf target/arm: cpu: mark WHPX as supporting PSCI 1.3
hw/arm: virt: cleanly fail on attempt to use the platform vGIC
together with ITS
whpx: arm64: clamp down IPA size
hw/arm, accel/hvf, whpx: unify get_physical_address_range between WHPX
and HVF
whpx: arm64: implement -cpu host
target/arm: whpx: instantiate GIC early
whpx: arm64: gicv3: add migration blocker
whpx: enable arm64 builds
MAINTAINERS: update maintainers for WHPX
docs: arm: update virt machine model description
whpx: apic: use non-deprecated APIs to control interrupt controller
state
Philippe Mathieu-Daudé (1):
accel/system: Introduce hwaccel_enabled() helper
Sebastian Ott (1):
target/arm/kvm: add constants for new PSCI versions
MAINTAINERS | 11 +-
accel/hvf/hvf-all.c | 7 +-
accel/meson.build | 1 +
accel/whpx/meson.build | 7 +
{target/i386 => accel}/whpx/whpx-accel-ops.c | 6 +-
accel/whpx/whpx-common.c | 666 +++++++++++
docs/system/arm/virt.rst | 10 +-
hw/arm/virt-acpi-build.c | 16 +-
hw/arm/virt.c | 70 +-
hw/i386/x86-cpu.c | 4 +-
hw/intc/arm_gicv3_common.c | 3 +
hw/intc/arm_gicv3_whpx.c | 249 ++++
hw/intc/meson.build | 1 +
include/hw/arm/virt.h | 6 +-
include/hw/boards.h | 3 +-
include/hw/intc/arm_gicv3_common.h | 3 +
include/system/hvf_int.h | 2 +
include/system/hw_accel.h | 13 +
.../whpx => include/system}/whpx-accel-ops.h | 4 +-
include/system/whpx-all.h | 20 +
include/system/whpx-common.h | 26 +
.../whpx => include/system}/whpx-internal.h | 23 +-
include/system/whpx.h | 4 +-
meson.build | 21 +-
target/arm/cpu.c | 3 +
target/arm/cpu64.c | 19 +-
target/arm/hvf-stub.c | 20 -
target/arm/hvf/hvf.c | 6 +-
target/arm/hvf_arm.h | 3 -
target/arm/kvm-consts.h | 2 +
target/arm/meson.build | 2 +-
target/arm/whpx/meson.build | 5 +
target/arm/whpx/whpx-all.c | 1021 +++++++++++++++++
target/arm/whpx/whpx-stub.c | 15 +
target/arm/whpx_arm.h | 17 +
target/i386/cpu-apic.c | 2 +-
target/i386/hvf/hvf.c | 11 +
target/i386/whpx/meson.build | 1 -
target/i386/whpx/whpx-all.c | 569 +--------
target/i386/whpx/whpx-apic.c | 48 +-
tests/data/acpi/aarch64/virt/APIC | Bin 172 -> 148 bytes
.../data/acpi/aarch64/virt/APIC.acpihmatvirt | Bin 412 -> 388 bytes
tests/data/acpi/aarch64/virt/APIC.its_off | Bin 164 -> 188 bytes
tests/data/acpi/aarch64/virt/APIC.topology | Bin 732 -> 708 bytes
44 files changed, 2267 insertions(+), 653 deletions(-)
create mode 100644 accel/whpx/meson.build
rename {target/i386 => accel}/whpx/whpx-accel-ops.c (96%)
create mode 100644 accel/whpx/whpx-common.c
create mode 100644 hw/intc/arm_gicv3_whpx.c
rename {target/i386/whpx => include/system}/whpx-accel-ops.h (92%)
create mode 100644 include/system/whpx-all.h
create mode 100644 include/system/whpx-common.h
rename {target/i386/whpx => include/system}/whpx-internal.h (89%)
delete mode 100644 target/arm/hvf-stub.c
create mode 100644 target/arm/whpx/meson.build
create mode 100644 target/arm/whpx/whpx-all.c
create mode 100644 target/arm/whpx/whpx-stub.c
create mode 100644 target/arm/whpx_arm.hSignature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 1/23 target/arm/kvm: add constants for new PSCI versions
From: Sebastian Ott <[email protected]>
Add constants for PSCI version 1_2 and 1_3.
--- target/arm/kvm-consts.h | 2 ++ 1 file changed, 2 insertions(+)
target/arm/kvm-consts.h +2 -0
@@ -97,6 +97,8 @@ MISMATCH_CHECK(QEMU_PSCI_1_0_FN_PSCI_FEATURES, PSCI_1_0_FN_PSCI_FEATURES);#define QEMU_PSCI_VERSION_0_2 0x00002#define QEMU_PSCI_VERSION_1_0 0x10000#define QEMU_PSCI_VERSION_1_1 0x10001 +#define QEMU_PSCI_VERSION_1_2 0x10002 +#define QEMU_PSCI_VERSION_1_3 0x10003MISMATCH_CHECK (QEMU_PSCI_0_2_RET_TOS_MIGRATION_NOT_REQUIRED ,PSCI_0_2_TOS_MP );/* We don't bother to check every possible version value */
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 2/23 accel/system: Introduce hwaccel_enabled() helper
In reply to Mohamed MediouniFrom: Philippe Mathieu-Daudé <[email protected]>
hwaccel_enabled() return whether any hardware accelerator is enabled.
--- include/system/hw_accel.h | 13 +++++++++++++ 1 file changed, 13 insertions(+)
include/system/hw_accel.h +13 -0
@@ -39,4 +39,17 @@ void cpu_synchronize_pre_loadvm(CPUState *cpu);void cpu_synchronize_post_reset (CPUState *cpu);void cpu_synchronize_post_init (CPUState *cpu); +/** +* hwaccel_enabled: +* +* Returns: %true if a hardware accelerator is enabled, %false otherwise. +*/ +static inline bool hwaccel_enabled (void ) +{ +return hvf_enabled () + ||kvm_enabled () + ||nvmm_enabled () + ||whpx_enabled (); +} +#endif /* QEMU_HW_ACCEL_H */
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 3/23 hw/arm: virt: add GICv2m for the case when ITS is not available
In reply to Mohamed MediouniOn Hypervisor.framework for macOS and WHPX for Windows, the provided environment is a GICv3 without ITS.
As such, support a GICv3 w/ GICv2m for that scenario.
--- hw/arm/virt-acpi-build.c | 4 +++- hw/arm/virt.c | 8 ++++++++ include/hw/arm/virt.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-)
hw/arm/virt-acpi-build.c +3 -1
@@ -959,7 +959,9 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)build_append_int_noprefix (table_data, memmap[VIRT_GIC_ITS ].base,8 );build_append_int_noprefix (table_data,0 ,4 );/* Reserved */ } - }else { + } + +if (!vms->its && !vms->no_gicv3_with_gicv2m) {const uint16_t spi_base = vms->irqmap[VIRT_GIC_V2M ] +ARM_SPI_BASE ;/* 5.2.12.16 GIC MSI Frame Structure */
hw/arm/virt.c +8 -0
@@ -956,6 +956,8 @@ static void create_gic(VirtMachineState *vms, MemoryRegion *mem)if (vms->gic_version !=VIRT_GIC_VERSION_2 && vms->its) {create_its (vms); + }else if (vms->gic_version !=VIRT_GIC_VERSION_2 && !vms->no_gicv3_with_gicv2m) { +create_v2m (vms); }else if (vms->gic_version ==VIRT_GIC_VERSION_2 ) {create_v2m (vms); }
@@ -2433,6 +2435,8 @@ static void machvirt_init(MachineState *machine) vms->ns_el2_virt_timer_irq =ns_el2_virt_timer_present () && !vmc->no_ns_el2_virt_timer_irq; + vms->no_gicv3_with_gicv2m = vmc->no_gicv3_with_gicv2m; +fdt_add_timer_nodes (vms);fdt_add_cpu_nodes (vms);
@@ -3467,6 +3471,7 @@ static void virt_instance_init(Object *obj) vms->its = true;/* Allow ITS emulation if the machine version supports it */ vms->tcg_its = !vmc->no_tcg_its; + vms->no_gicv3_with_gicv2m = false;/* Default disallows iommu instantiation */ vms->iommu =VIRT_IOMMU_NONE ;
@@ -3519,8 +3524,11 @@ DEFINE_VIRT_MACHINE_AS_LATEST(10, 2)static void virt_machine_10_1_options (MachineClass *mc) { +VirtMachineClass *vmc =VIRT_MACHINE_CLASS (OBJECT_CLASS (mc)); +virt_machine_10_2_options (mc);compat_props_add (mc->compat_props, hw_compat_10_1, hw_compat_10_1_len); + vmc->no_gicv3_with_gicv2m = true; }DEFINE_VIRT_MACHINE (10 ,1 )
include/hw/arm/virt.h +2 -0
@@ -131,6 +131,7 @@ struct VirtMachineClass {bool no_cpu_topology;bool no_tcg_lpa2;bool no_ns_el2_virt_timer_irq; +bool no_gicv3_with_gicv2m;bool no_nested_smmu; };
@@ -178,6 +179,7 @@ struct VirtMachineState {char *oem_id;char *oem_table_id;bool ns_el2_virt_timer_irq; +bool no_gicv3_with_gicv2m;CXLState cxl_devices_state;bool legacy_smmuv3_present; };
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v6 03/23] hw/arm: virt: add GICv2m for the case when ITS is not available
Quoted 5 lines · Mohamed Mediouni
On Hypervisor.framework for macOS and WHPX for Windows, the provided environment is a GICv3 without ITS.
As such, support a GICv3 w/ GICv2m for that scenario.
Quoted 8 lines
Signed-off-by Mohamed Mediouni <[email protected]>Reviewed-by Pierrick Bouvier <[email protected]>--- hw/arm/virt-acpi-build.c | 4 +++- hw/arm/virt.c | 8 ++++++++ include/hw/arm/virt.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-)
Looking at this I find myself wondering whether we need the old-version back compat handling. The cases I think we have at the moment are:
(1) TCG, virt-6.1 and earlier: no_tcg_its is set
-- you can have a gicv2 (always with a gicv2m)
-- if you specify gic-version=3 you get a GICv3 without ITS
(2) TCG, virt-6.2 and later:
-- gic-version=2 still has gicv2m
-- gic-version=3 by default gives you an ITS; if you also
say its=off you get GICv3 with no ITS
-- there is no case where we provide a GICv3 and are
unable to provide an ITS for it
(3) KVM (any version):
-- gic-version=2 has a gicv2m
-- gic-version=3 gives you an ITS by default; its=off
will remove it
-- there is no case where we provide a GICv3 and are
unable to provide an ITS for it
(4) HVF:
-- only gic-version=2 works, you get a gicv2m
and I think what we want is:
(a) if you explicitly disable the ITS (with its=off or via no_tcg_its) you get no ITS (and no gicv2m)
(b) if you explicitly enable the ITS you should get an actual ITS or an error message
(c) the default should be its=auto which gives
you "ITS if we can, gicv2m if we can't".
This is repurposing the its= property as "message signaled interrupt support", which is a little bit of a hack but I think OK if we're clear about it in the docs. (We could rename the property to "msi=(off,its,gicv2m,auto)" with back-compat support for "its=" but I don't know if that's worth the effort.)
And then that doesn't need any back-compat handling for pre-10.2 machine types or a "no_gicv3_with_gicv2m" flag, because for 10.1 and earlier there is no case that currently works and which falls into category (c) and which doesn't give you an ITS. (because we don't yet have hvf gicv3 implemented: that's a new feature that never worked in 10.1.)
What do you think?
thanks
-- PMM
Re: [PATCH v6 03/23] hw/arm: virt: add GICv2m for the case when ITS is not available
Quoted 56 lines · Peter Maydell
Quoted 5 lines · Mohamed Mediouni
On Hypervisor.framework for macOS and WHPX for Windows, the provided environment is a GICv3 without ITS.
As such, support a GICv3 w/ GICv2m for that scenario.
Quoted 8 lines
Signed-off-by Mohamed Mediouni <[email protected]>Reviewed-by Pierrick Bouvier <[email protected]>---
hw/arm/virt-acpi-build.c | 4 +++- hw/arm/virt.c | 8 ++++++++ include/hw/arm/virt.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-)Looking at this I find myself wondering whether we need the old-version back compat handling. The cases I think we have at the moment are:
(1) TCG, virt-6.1 and earlier:
no_tcg_itsis set
-- you can have a gicv2 (always with a gicv2m)
-- if you specify gic-version=3 you get a GICv3 without ITS
(2) TCG, virt-6.2 and later:
-- gic-version=2 still has gicv2m
-- gic-version=3 by default gives you an ITS; if you also
say its=off you get GICv3 with no ITS
-- there is no case where we provide a GICv3 and are
unable to provide an ITS for it
(3) KVM (any version):
-- gic-version=2 has a gicv2m
-- gic-version=3 gives you an ITS by default; its=off
will remove it
-- there is no case where we provide a GICv3 and are
unable to provide an ITS for it
(4) HVF:
-- only gic-version=2 works, you get a gicv2mand I think what we want is:
(a) if you explicitly disable the ITS (with its=off or viano_tcg_its) you get no ITS (and no gicv2m)
(b) if you explicitly enable the ITS you should get an actual ITS or an error message
(c) the default should be its=auto which gives
you "ITS if we can, gicv2m if we can't".
This is repurposing the its= property as "message signaled interrupt support", which is a little bit of a hack but I think OK if we're clear about it in the docs. (We could rename the property to "msi=(off,its,gicv2m,auto)" with back-compat support for "its=" but I don't know if that's worth the effort.)
Quoted 8 lines
And then that doesn't need any back-compat handling for pre-10.2 machine types or a "
no_gicv3_with_gicv2m" flag, because for 10.1 and earlier there is no case that currently works and which falls into category (c) and which doesn't give you an ITS. (because we don't yet have hvf gicv3 implemented: that's a new feature that never worked in 10.1.)What do you think?
Would it be wanted to provide MSI-X support in all scenarios even with its=off?
And there’s the consequence of that making GICv3 + GICv2m only testable with auto and not with TCG or kvm, which doesn’t sound ideal.
Thanks,
Quoted 2 lines
thanks
-- PMM
Re: [PATCH v6 03/23] hw/arm: virt: add GICv2m for the case when ITS is not available
Quoted 64 lines · Mohamed Mediouni
Quoted 64 lines · Peter Maydell
Quoted 5 lines · Mohamed Mediouni
On Hypervisor.framework for macOS and WHPX for Windows, the provided environment is a GICv3 without ITS.
As such, support a GICv3 w/ GICv2m for that scenario.
Quoted 8 lines
Signed-off-by Mohamed Mediouni <[email protected]>Reviewed-by Pierrick Bouvier <[email protected]>---
hw/arm/virt-acpi-build.c | 4 +++- hw/arm/virt.c | 8 ++++++++ include/hw/arm/virt.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-)Looking at this I find myself wondering whether we need the old-version back compat handling. The cases I think we have at the moment are:
(1) TCG, virt-6.1 and earlier:
no_tcg_itsis set
-- you can have a gicv2 (always with a gicv2m)
-- if you specify gic-version=3 you get a GICv3 without ITS
(2) TCG, virt-6.2 and later:
-- gic-version=2 still has gicv2m
-- gic-version=3 by default gives you an ITS; if you also
say its=off you get GICv3 with no ITS
-- there is no case where we provide a GICv3 and are
unable to provide an ITS for it
(3) KVM (any version):
-- gic-version=2 has a gicv2m
-- gic-version=3 gives you an ITS by default; its=off
will remove it
-- there is no case where we provide a GICv3 and are
unable to provide an ITS for it
(4) HVF:
-- only gic-version=2 works, you get a gicv2mand I think what we want is:
(a) if you explicitly disable the ITS (with its=off or viano_tcg_its) you get no ITS (and no gicv2m)
(b) if you explicitly enable the ITS you should get an actual ITS or an error message
(c) the default should be its=auto which gives
you "ITS if we can, gicv2m if we can't".
This is repurposing the its= property as "message signaled interrupt support", which is a little bit of a hack but I think OK if we're clear about it in the docs. (We could rename the property to "msi=(off,its,gicv2m,auto)" with back-compat support for "its=" but I don't know if that's worth the effort.)And then that doesn't need any back-compat handling for pre-10.2 machine types or a "
no_gicv3_with_gicv2m" flag, because for 10.1 and earlier there is no case that currently works and which falls into category (c) and which doesn't give you an ITS. (because we don't yet have hvf gicv3 implemented: that's a new feature that never worked in 10.1.)
Quoted 4 lines
Quoted 1 line
What do you think?
Would it be wanted to provide MSI-X support in all scenarios even with its=off?
We should prefer to provide MSI-X support. If the user explicitly asks for a config that doesn't give MSI-X support, that's their choice to make.
Quoted 2 lines
And there’s the consequence of that making GICv3 + GICv2m only testable with auto and not with TCG or kvm, which doesn’t sound ideal.
I guess that would be an argument for the "give the property the right name so we can say "msi=(off,its,gicv2m,auto)". Then you could say
-accel tcg -machine gic-version=3,msi=gicv2m
to test that setup.
thanks
-- PMM
Re: [PATCH v6 03/23] hw/arm: virt: add GICv2m for the case when ITS is not available
Quoted 81 lines · Peter Maydell
Quoted 64 lines · Mohamed Mediouni
Quoted 64 lines · Peter Maydell
Quoted 5 lines · Mohamed Mediouni
On Hypervisor.framework for macOS and WHPX for Windows, the provided environment is a GICv3 without ITS.
As such, support a GICv3 w/ GICv2m for that scenario.
Quoted 8 lines
Signed-off-by Mohamed Mediouni <[email protected]>Reviewed-by Pierrick Bouvier <[email protected]>---
hw/arm/virt-acpi-build.c | 4 +++- hw/arm/virt.c | 8 ++++++++ include/hw/arm/virt.h | 2 ++ 3 files changed, 13 insertions(+), 1 deletion(-)Looking at this I find myself wondering whether we need the old-version back compat handling. The cases I think we have at the moment are:
(1) TCG, virt-6.1 and earlier:
no_tcg_itsis set -- you can have a gicv2 (always with a gicv2m)
-- if you specify gic-version=3 you get a GICv3 without ITS
(2) TCG, virt-6.2 and later:
-- gic-version=2 still has gicv2m
-- gic-version=3 by default gives you an ITS; if you also
say its=off you get GICv3 with no ITS
-- there is no case where we provide a GICv3 and are
unable to provide an ITS for it
(3) KVM (any version):
-- gic-version=2 has a gicv2m
-- gic-version=3 gives you an ITS by default; its=off
will remove it
-- there is no case where we provide a GICv3 and are
unable to provide an ITS for it
(4) HVF:
-- only gic-version=2 works, you get a gicv2mand I think what we want is:
(a) if you explicitly disable the ITS (with its=off or viano_tcg_its) you get no ITS (and no gicv2m)
(b) if you explicitly enable the ITS you should get an actual ITS or an error message
(c) the default should be its=auto which gives
you "ITS if we can, gicv2m if we can't".
This is repurposing the its= property as "message signaled interrupt support", which is a little bit of a hack but I think OK if we're clear about it in the docs. (We could rename the property to "msi=(off,its,gicv2m,auto)" with back-compat support for "its=" but I don't know if that's worth the effort.)And then that doesn't need any back-compat handling for pre-10.2 machine types or a "
no_gicv3_with_gicv2m" flag, because for 10.1 and earlier there is no case that currently works and which falls into category (c) and which doesn't give you an ITS. (because we don't yet have hvf gicv3 implemented: that's a new feature that never worked in 10.1.)Quoted 4 lines
Quoted 1 line
What do you think?
Would it be wanted to provide MSI-X support in all scenarios even with its=off?
We should prefer to provide MSI-X support. If the user explicitly asks for a config that doesn't give MSI-X support, that's their choice to make.
Quoted 2 lines
And there’s the consequence of that making GICv3 + GICv2m only testable with auto and not with TCG or kvm, which doesn’t sound ideal.
Quoted 6 lines
I guess that would be an argument for the "give the property the right name so we can say "msi=(off,its,gicv2m,auto)". Then you could say
-accel tcg -machine gic-version=3,msi=gicv2mto test that setup.
Is there guidance around renaming properties?
Would it be proper to do:
- if its=auto, consider the new msi property
- otherwise, use the its property
Thank you,
-Mohamed
Quoted 3 lines
thanks
-- PMM
Re: [PATCH v6 03/23] hw/arm: virt: add GICv2m for the case when ITS is not available
Quoted 9 lines · Mohamed Mediouni
Quoted 7 lines · Peter Maydell
I guess that would be an argument for the "give the property the right name so we can say "msi=(off,its,gicv2m,auto)". Then you could say
-accel tcg -machine gic-version=3,msi=gicv2mto test that setup.
Is there guidance around renaming properties?
I'm not sure if there is. So the below is just my initial suggestion.
Quoted 3 lines
Would it be proper to do:
- if its=auto, consider the new msi property
- otherwise, use the its property
I think we should write the code in a way that looks ahead to marking the its property as deprecated and eventually removing it. So the handling for the new "msi" property should be done in a way that doesn't need changes if/when we drop the "its" property.
We don't currently attempt to detect oddball user commandlines like "-M virt,its=on,its=off", so I don't think we need to go to any particular effort to diagnose the equivalently odd "-M virt,its=on,msi=off" etc.
We can implement the two options as essentially independent, where "its=on" is equivalent to "msi=auto" and "its=off" is equivalent to "msi=off" (i.e. what we currently have as a bool turns into an enum, and the set/get functions for "its" and "msi" both operate on the same underlying struct field.)
thanks
-- PMM
PATCH v6 4/23 tests: data: update AArch64 ACPI tables
In reply to Mohamed MediouniAfter the previous commit introducing GICv3 + GICv2m configurations, update the AArch64 ACPI tables.
--- tests/data/acpi/aarch64/virt/APIC | Bin 172 -> 148 bytes tests/data/acpi/aarch64/virt/APIC.acpihmatvirt | Bin 412 -> 388 bytes tests/data/acpi/aarch64/virt/APIC.its_off | Bin 164 -> 188 bytes tests/data/acpi/aarch64/virt/APIC.topology | Bin 732 -> 708 bytes 4 files changed, 0 insertions(+), 0 deletions(-)
tests/data/acpi/aarch64/virt/APIC binary +0 -0
tests/data/acpi/aarch64/virt/APIC.acpihmatvirt binary +0 -0
tests/data/acpi/aarch64/virt/APIC.its_off binary +0 -0
tests/data/acpi/aarch64/virt/APIC.topology binary +0 -0
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v6 04/23] tests: data: update AArch64 ACPI tables
Quoted 11 lines · Mohamed Mediouni
After the previous commit introducing GICv3 + GICv2m configurations, update the AArch64 ACPI tables.
Signed-off-by Mohamed Mediouni <[email protected]>--- tests/data/acpi/aarch64/virt/APIC | Bin 172 -> 148 bytes tests/data/acpi/aarch64/virt/APIC.acpihmatvirt | Bin 412 -> 388 bytes tests/data/acpi/aarch64/virt/APIC.its_off | Bin 164 -> 188 bytes tests/data/acpi/aarch64/virt/APIC.topology | Bin 732 -> 708 bytes 4 files changed, 0 insertions(+), 0 deletions(-)
This will break 'make check' during bisection. To make a change which updates the ACPI table test data, you need to do a three step process, as documented in the comment at the top of tests/qtest/bios-tables-test.c, which will result in three patches:
* a patch which lists the tests which would otherwise fail in the allowed-to-fail list
* the patch which makes the actual change to QEMU
* a patch which updates the test binary blobs and empties the allowed-to-fail list
thanks
-- PMM
PATCH v6 5/23 whpx: Move around files before introducing AArch64 support
In reply to Mohamed MediouniSwitch to a design where we can share whpx code between x86 and AArch64 when it makes sense to do so.
---
MAINTAINERS | 2 ++
accel/meson.build | 1 +
accel/whpx/meson.build | 6 ++++++
{target/i386 => accel}/whpx/whpx-accel-ops.c | 4 ++--
{target/i386/whpx => include/system}/whpx-accel-ops.h | 4 ++--
{target/i386/whpx => include/system}/whpx-internal.h | 5 +++--
target/i386/whpx/meson.build | 1 -
target/i386/whpx/whpx-all.c | 4 ++--
target/i386/whpx/whpx-apic.c | 2 +-
9 files changed, 19 insertions(+), 10 deletions(-)
create mode 100644 accel/whpx/meson.build
rename {target/i386 => accel}/whpx/whpx-accel-ops.c (97%)
rename {target/i386/whpx => include/system}/whpx-accel-ops.h (92%)
rename {target/i386/whpx => include/system}/whpx-internal.h (98%)MAINTAINERS +2 -0
@@ -547,9 +547,11 @@ F: include/system/hvf_int.h WHPX CPUs M: Sunil Muthuswamy <[email protected]> S: Supported +F: accel/whpx/ F: target/i386/whpx/ F: accel/stubs/whpx-stub.c F: include/system/whpx.h +F: include/system/whpx-accel-ops.h X86 Instruction Emulator M: Cameron Esfahani <[email protected]>
accel/meson.build +1 -0
@@ -6,6 +6,7 @@ user_ss.add(files('accel-user.c')) subdir('tcg') if have_system subdir('hvf') + subdir('whpx') subdir('qtest') subdir('kvm') subdir('xen')
accel/whpx/meson.build new file +6 -0
@@ -0,0 +1,6 @@ +whpx_ss = ss.source_set() +whpx_ss.add(files( + 'whpx-accel-ops.c', +)) + +specific_ss.add_all(when: 'CONFIG_WHPX', if_true: whpx_ss)
accel/whpx/whpx-accel-ops.c renamed from target/i386/whpx/whpx-accel-ops.c +2 -2
@@ -16,8 +16,8 @@#include "qemu/guest-random.h" #include "system/whpx.h" -#include "whpx-internal.h" -#include "whpx-accel-ops.h" +#include "system/whpx-internal.h" +#include "system/whpx-accel-ops.h" static void *whpx_cpu_thread_fn (void *arg) {
include/system/whpx-accel-ops.h renamed from target/i386/whpx/whpx-accel-ops.h +2 -2
@@ -7,8 +7,8 @@* See the COPYING file in the top-level directory. */ -#ifndef TARGET_I386_WHPX_ACCEL_OPS_H -#define TARGET_I386_WHPX_ACCEL_OPS_H +#ifndef SYSTEM_WHPX_ACCEL_OPS_H +#define SYSTEM_WHPX_ACCEL_OPS_H #include "system/cpus.h"
include/system/whpx-internal.h renamed from target/i386/whpx/whpx-internal.h +3 -2
@@ -1,5 +1,6 @@ -#ifndef TARGET_I386_WHPX_INTERNAL_H -#define TARGET_I386_WHPX_INTERNAL_H +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef SYSTEM_WHPX_INTERNAL_H +#define SYSTEM_WHPX_INTERNAL_H #include <windows.h> #include <winhvplatform.h>
target/i386/whpx/meson.build +0 -1
@@ -1,5 +1,4 @@ i386_system_ss.add(when: 'CONFIG_WHPX', if_true: files( 'whpx-all.c', 'whpx-apic.c', - 'whpx-accel-ops.c', ))
target/i386/whpx/whpx-all.c +2 -2
@@ -31,8 +31,8 @@#include "accel/accel-cpu-target.h" #include <winerror.h> -#include "whpx-internal.h" -#include "whpx-accel-ops.h" +#include "system/whpx-internal.h" +#include "system/whpx-accel-ops.h" #include <winhvplatform.h> #include <winhvemulation.h>
target/i386/whpx/whpx-apic.c +1 -1
@@ -18,7 +18,7 @@#include "hw/pci/msi.h" #include "system/hw_accel.h" #include "system/whpx.h" -#include "whpx-internal.h" +#include "system/whpx-internal.h" struct whpx_lapic_state { struct {
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 6/23 whpx: reshuffle common code
In reply to Mohamed MediouniSome code can be shared between x86_64 and arm64 WHPX. Do so as much as reasonable.
--- MAINTAINERS | 2 + accel/whpx/meson.build | 1 + accel/whpx/whpx-common.c | 562 +++++++++++++++++++++++++++++++++++ include/system/whpx-all.h | 20 ++ include/system/whpx-common.h | 21 ++ target/i386/whpx/whpx-all.c | 551 +--------------------------------- 6 files changed, 616 insertions(+), 541 deletions(-) create mode 100644 accel/whpx/whpx-common.c create mode 100644 include/system/whpx-all.h create mode 100644 include/system/whpx-common.h
MAINTAINERS +2 -0
@@ -552,6 +552,8 @@ F: target/i386/whpx/ F: accel/stubs/whpx-stub.c F: include/system/whpx.h F: include/system/whpx-accel-ops.h +F: include/system/whpx-common.h +F: include/system/whpx-internal.h X86 Instruction Emulator M: Cameron Esfahani <[email protected]>
accel/whpx/meson.build +1 -0
@@ -1,6 +1,7 @@ whpx_ss = ss.source_set() whpx_ss.add(files( 'whpx-accel-ops.c', + 'whpx-common.c' )) specific_ss.add_all(when: 'CONFIG_WHPX', if_true: whpx_ss)
accel/whpx/whpx-common.c new file +562 -0
562 lines not on this page · raw message
include/system/whpx-all.h new file +20 -0
@@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef SYSTEM_WHPX_ALL_H +#define SYSTEM_WHPX_ALL_H + +/* Called by whpx-common */ +int whpx_vcpu_run (CPUState *cpu); +void whpx_get_registers (CPUState *cpu); +void whpx_set_registers (CPUState *cpu,int level); +int whpx_accel_init (AccelState *as,MachineState *ms); +void whpx_cpu_instance_init (CPUState *cs); +HRESULT whpx_set_exception_exit_bitmap (UINT64 exceptions); +void whpx_apply_breakpoints ( +struct whpx_breakpoint_collection *breakpoints, +CPUState *cpu, +bool resuming); +void whpx_translate_cpu_breakpoints ( +struct whpx_breakpoints *breakpoints, +CPUState *cpu, +int cpu_breakpoint_count); +#endif
include/system/whpx-common.h new file +21 -0
@@ -0,0 +1,21 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef SYSTEM_WHPX_COMMON_H +#define SYSTEM_WHPX_COMMON_H + +struct AccelCPUState { +WHV_EMULATOR_HANDLE emulator; +bool window_registered; +bool interruptable; +bool ready_for_pic_interrupt; +uint64_t tpr; +uint64_t apic_base; +bool interruption_pending; +/* Must be the last field as it may have a tail */ +WHV_RUN_VP_EXIT_CONTEXT exit_ctx; +}; + +int whpx_first_vcpu_starting (CPUState *cpu); +int whpx_last_vcpu_stopping (CPUState *cpu); +void whpx_memory_init (void ); +struct whpx_breakpoint *whpx_lookup_breakpoint_by_addr (uint64_t address); +#endif
target/i386/whpx/whpx-all.c +10 -541
639 lines not on this page · raw message
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 7/23 whpx: ifdef out winhvemulation on non-x86_64
In reply to Mohamed Mediouniwinhvemulation is x86_64 only.
In the future, we might want to get rid of winhvemulation usage entirely.
--- accel/whpx/whpx-common.c | 14 ++++++++++++-- include/system/whpx-common.h | 2 ++ include/system/whpx-internal.h | 7 ++++++- 3 files changed, 20 insertions(+), 3 deletions(-)
accel/whpx/whpx-common.c +12 -2
@@ -41,7 +41,9 @@bool whpx_allowed;static bool whp_dispatch_initialized;static HMODULE hWinHvPlatform; +#ifdef __x86_64__static HMODULE hWinHvEmulation; +#endif struct whpx_state whpx_global;struct WHPDispatch whp_dispatch;
@@ -236,8 +238,10 @@ void whpx_destroy_vcpu(CPUState *cpu)struct whpx_state *whpx = &whpx_global; whp_dispatch.WHvDeleteVirtualProcessor (whpx->partition, cpu->cpu_index); +#ifdef __x86_64__AccelCPUState *vcpu = cpu->accel; whp_dispatch.WHvEmulatorDestroyEmulator (vcpu->emulator); +#endif g_free (cpu->accel); }
@@ -412,8 +416,12 @@ static bool load_whp_dispatch_fns(HMODULE *handle,LIST_WINHVPLATFORM_FUNCTIONS (WHP_LOAD_FIELD) break;case WINHV_EMULATION_FNS_DEFAULT : +#ifdef __x86_64__ WHP_LOAD_LIB(WINHV_EMULATION_DLL, hLib) LIST_WINHVEMULATION_FUNCTIONS(WHP_LOAD_FIELD) +#else +g_assert_not_reached (); +#endif break ;case WINHV_PLATFORM_FNS_SUPPLEMENTAL :WHP_LOAD_LIB (WINHV_PLATFORM_DLL , hLib)
@@ -539,11 +547,11 @@ bool init_whp_dispatch(void)if (!load_whp_dispatch_fns (&hWinHvPlatform,WINHV_PLATFORM_FNS_DEFAULT )) { goto error; } - +#ifdef __x86_64__if (!load_whp_dispatch_fns (&hWinHvEmulation,WINHV_EMULATION_FNS_DEFAULT )) { goto error; } - +#endif assert (load_whp_dispatch_fns (&hWinHvPlatform,WINHV_PLATFORM_FNS_SUPPLEMENTAL )); whp_dispatch_initialized = true;
@@ -553,9 +561,11 @@ error:if (hWinHvPlatform) {FreeLibrary (hWinHvPlatform); } +#ifdef __x86_64__if (hWinHvEmulation) {FreeLibrary (hWinHvEmulation); } +#endif return false; }
include/system/whpx-common.h +2 -0
@@ -3,7 +3,9 @@#define SYSTEM_WHPX_COMMON_H struct AccelCPUState { +#ifdef __x86_64__WHV_EMULATOR_HANDLE emulator; +#endif bool window_registered;bool interruptable;bool ready_for_pic_interrupt;
include/system/whpx-internal.h +6 -1
@@ -4,8 +4,9 @@#include <windows.h> #include <winhvplatform.h> +#ifdef __x86_64__#include <winhvemulation.h> - +#endif typedef enum WhpxBreakpointState { WHPX_BP_CLEARED = 0, WHPX_BP_SET_PENDING,
@@ -98,12 +99,16 @@ void whpx_apic_get(DeviceState *s);/* Define function typedef */ LIST_WINHVPLATFORM_FUNCTIONS(WHP_DEFINE_TYPE) +#ifdef __x86_64__ LIST_WINHVEMULATION_FUNCTIONS(WHP_DEFINE_TYPE) +#endif LIST_WINHVPLATFORM_FUNCTIONS_SUPPLEMENTAL (WHP_DEFINE_TYPE) struct WHPDispatch { LIST_WINHVPLATFORM_FUNCTIONS(WHP_DECLARE_MEMBER) +#ifdef __x86_64__ LIST_WINHVEMULATION_FUNCTIONS(WHP_DECLARE_MEMBER) +#endif LIST_WINHVPLATFORM_FUNCTIONS_SUPPLEMENTAL(WHP_DECLARE_MEMBER) };
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 8/23 whpx: common: add WHPX_INTERCEPT_DEBUG_TRAPS define
In reply to Mohamed MediouniAs of why: WHPX on arm64 doesn't have debug trap support as of today.
Keep the exception bitmap interface for now - despite that being entirely unavailable on arm64 too.
--- accel/whpx/whpx-common.c | 2 +- include/system/whpx-common.h | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-)
accel/whpx/whpx-common.c +1 -1
@@ -123,7 +123,7 @@ int whpx_first_vcpu_starting(CPUState *cpu)* have one or more breakpoints enabled. Both require intercepting * the WHvX64ExceptionTypeBreakpointTrap exception. */ - exception_mask =1UL << WHvX64ExceptionTypeDebugTrapOrFault; + exception_mask =1UL <<WHPX_INTERCEPT_DEBUG_TRAPS ; }else {/* Let the guest handle all exceptions. */ exception_mask =0 ;
include/system/whpx-common.h +3 -0
@@ -20,4 +20,7 @@ int whpx_first_vcpu_starting(CPUState *cpu);int whpx_last_vcpu_stopping (CPUState *cpu);void whpx_memory_init (void );struct whpx_breakpoint *whpx_lookup_breakpoint_by_addr (uint64_t address); + +/* On x64: same as WHvX64ExceptionTypeDebugTrapOrFault */ +#define WHPX_INTERCEPT_DEBUG_TRAPS 1#endif
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 9/23 hw, target, accel: whpx: change apic_in_platform to kernel_irqchip
In reply to Mohamed MediouniChange terminology to match the KVM one, as APIC is x86-specific.
--- accel/whpx/whpx-accel-ops.c | 2 +- accel/whpx/whpx-common.c | 4 ++-- hw/i386/x86-cpu.c | 4 ++-- include/system/whpx-internal.h | 2 +- include/system/whpx.h | 4 ++-- target/i386/cpu-apic.c | 2 +- target/i386/whpx/whpx-all.c | 14 +++++++------- 7 files changed, 16 insertions(+), 16 deletions(-)
accel/whpx/whpx-accel-ops.c +1 -1
@@ -78,7 +78,7 @@ static void whpx_kick_vcpu_thread(CPUState *cpu)static bool whpx_vcpu_thread_is_idle (CPUState *cpu) { -return !whpx_apic_in_platform (); +return !whpx_irqchip_in_kernel (); }static void whpx_accel_ops_class_init (ObjectClass *oc,const void *data)
accel/whpx/whpx-common.c +2 -2
@@ -496,9 +496,9 @@ static const TypeInfo whpx_cpu_accel_type = {* Partition support */ -bool whpx_apic_in_platform (void ) +bool whpx_irqchip_in_kernel (void ) { -return whpx_global.apic_in_platform; +return whpx_global.kernel_irqchip; }static void whpx_accel_class_init (ObjectClass *oc,const void *data)
hw/i386/x86-cpu.c +2 -2
@@ -45,7 +45,7 @@ static void pic_irq_request(void *opaque, int irq, int level)trace_x86_pic_interrupt (irq, level);if (cpu_is_apic_enabled (cpu->apic_state) && !kvm_irqchip_in_kernel () && - !whpx_apic_in_platform ()) { + !whpx_irqchip_in_kernel ()) {CPU_FOREACH (cs) { cpu =X86_CPU (cs);if (apic_accept_pic_intr (cpu->apic_state)) {
@@ -71,7 +71,7 @@ int cpu_get_pic_interrupt(CPUX86State *env)X86CPU *cpu =env_archcpu (env);int intno; -if (!kvm_irqchip_in_kernel () && !whpx_apic_in_platform ()) { +if (!kvm_irqchip_in_kernel () && !whpx_irqchip_in_kernel ()) { intno =apic_get_interrupt (cpu->apic_state);if (intno >=0 ) {return intno;
include/system/whpx-internal.h +1 -1
@@ -42,7 +42,7 @@ struct whpx_state {bool kernel_irqchip_allowed;bool kernel_irqchip_required; -bool apic_in_platform; +bool kernel_irqchip; };extern struct whpx_state whpx_global;
include/system/whpx.h +2 -2
@@ -26,10 +26,10 @@#ifdef CONFIG_WHPX_IS_POSSIBLE extern bool whpx_allowed;#define whpx_enabled () (whpx_allowed) -bool whpx_apic_in_platform (void ); +bool whpx_irqchip_in_kernel (void );#else /* !CONFIG_WHPX_IS_POSSIBLE */ #define whpx_enabled () 0 -#define whpx_apic_in_platform () (0) +#define whpx_irqchip_in_kernel () (0)#endif /* !CONFIG_WHPX_IS_POSSIBLE */ #endif /* QEMU_WHPX_H */
target/i386/cpu-apic.c +1 -1
@@ -32,7 +32,7 @@ APICCommonClass *apic_get_class(Error **errp) apic_type ="kvm-apic" ; }else if (xen_enabled ()) { apic_type ="xen-apic" ; - }else if (whpx_apic_in_platform ()) { + }else if (whpx_irqchip_in_kernel ()) { apic_type ="whpx-apic" ; }
target/i386/whpx/whpx-all.c +7 -7
@@ -607,7 +607,7 @@ void whpx_get_registers(CPUState *cpu) hr); } -if (whpx_apic_in_platform ()) { +if (whpx_irqchip_in_kernel ()) {/* * Fetch the TPR value from the emulated APIC. It may get overwritten * below with the value from CR8 returned by
@@ -749,7 +749,7 @@ void whpx_get_registers(CPUState *cpu)assert (idx ==RTL_NUMBER_OF (whpx_register_names)); -if (whpx_apic_in_platform ()) { +if (whpx_irqchip_in_kernel ()) {whpx_apic_get (x86_cpu->apic_state); }
@@ -1376,7 +1376,7 @@ static void whpx_vcpu_pre_run(CPUState *cpu) }/* Get pending hard interruption or replay one that was overwritten */ -if (!whpx_apic_in_platform ()) { +if (!whpx_irqchip_in_kernel ()) {if (!vcpu->interruption_pending && vcpu->interruptable && (env->eflags &IF_MASK )) {assert (!new_int.InterruptionPending);
@@ -1549,7 +1549,7 @@ int whpx_vcpu_run(CPUState *cpu)if (exclusive_step_mode ==WHPX_STEP_NONE ) {whpx_vcpu_process_async_events (cpu); -if (cpu->halted && !whpx_apic_in_platform ()) { +if (cpu->halted && !whpx_irqchip_in_kernel ()) { cpu->exception_index =EXCP_HLT ;qatomic_set (&cpu->exit_request, false);return 0 ;
@@ -1638,7 +1638,7 @@ int whpx_vcpu_run(CPUState *cpu)break ;case WHvRunVpExitReasonX64ApicEoi: -assert (whpx_apic_in_platform ()); +assert (whpx_irqchip_in_kernel ());ioapic_eoi_broadcast (vcpu->exit_ctx.ApicEoi.InterruptVector);break ;
@@ -2183,7 +2183,7 @@ int whpx_accel_init(AccelState *as, MachineState *ms) goto error; } }else { - whpx->apic_in_platform = true; + whpx->kernel_irqchip = true; } }
@@ -2192,7 +2192,7 @@ int whpx_accel_init(AccelState *as, MachineState *ms) prop.ExtendedVmExits.X64MsrExit =1 ; prop.ExtendedVmExits.X64CpuidExit =1 ; prop.ExtendedVmExits.ExceptionExit =1 ; -if (whpx_apic_in_platform ()) { +if (whpx_irqchip_in_kernel ()) { prop.ExtendedVmExits.X64ApicInitSipiExitTrap =1 ; }
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 10/23 whpx: interrupt controller support
In reply to Mohamed Mediouni--- hw/arm/virt.c | 3 + hw/intc/arm_gicv3_common.c | 3 + hw/intc/arm_gicv3_whpx.c | 239 +++++++++++++++++++++++++++++ hw/intc/meson.build | 1 + include/hw/intc/arm_gicv3_common.h | 3 + 5 files changed, 249 insertions(+) create mode 100644 hw/intc/arm_gicv3_whpx.c
hw/arm/virt.c +3 -0
@@ -47,6 +47,7 @@#include "system/tcg.h" #include "system/kvm.h" #include "system/hvf.h" +#include "system/whpx.h" #include "system/qtest.h" #include "system/system.h" #include "hw/loader.h"
@@ -2091,6 +2092,8 @@ static void finalize_gic_version(VirtMachineState *vms)/* KVM w/o kernel irqchip can only deal with GICv2 */ gics_supported |=VIRT_GIC_VERSION_2_MASK ; accel_name ="KVM with kernel-irqchip=off" ; + }else if (whpx_enabled ()) { + gics_supported |=VIRT_GIC_VERSION_3_MASK ; }else if (tcg_enabled () ||hvf_enabled () ||qtest_enabled ()) { gics_supported |=VIRT_GIC_VERSION_2_MASK ;if (module_object_class_by_name ("arm-gicv3" )) {
hw/intc/arm_gicv3_common.c +3 -0
@@ -32,6 +32,7 @@#include "gicv3_internal.h" #include "hw/arm/linux-boot-if.h" #include "system/kvm.h" +#include "system/whpx.h" static void gicv3_gicd_no_migration_shift_bug_post_load (GICv3State *cs)
@@ -662,6 +663,8 @@ const char *gicv3_class_name(void) {if (kvm_irqchip_in_kernel ()) {return "kvm-arm-gicv3" ; + }else if (whpx_enabled ()) { +return TYPE_WHPX_GICV3 ; }else {if (kvm_enabled ()) {error_report ("Userspace GICv3 is not supported with KVM" );
hw/intc/arm_gicv3_whpx.c new file +239 -0
239 lines not on this page · raw message
hw/intc/meson.build +1 -0
@@ -41,6 +41,7 @@ specific_ss.add(when: 'CONFIG_APIC', if_true: files('apic.c', 'apic_common.c')) arm_common_ss.add(when: 'CONFIG_ARM_GIC', if_true: files('arm_gicv3_cpuif_common.c')) arm_common_ss.add(when: 'CONFIG_ARM_GICV3', if_true: files('arm_gicv3_cpuif.c')) specific_ss.add(when: 'CONFIG_ARM_GIC_KVM', if_true: files('arm_gic_kvm.c')) +specific_ss.add(when: ['CONFIG_WHPX', 'TARGET_AARCH64'], if_true: files('arm_gicv3_whpx.c')) specific_ss.add(when: ['CONFIG_ARM_GIC_KVM', 'TARGET_AARCH64'], if_true: files('arm_gicv3_kvm.c', 'arm_gicv3_its_kvm.c')) arm_common_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m_nvic.c')) specific_ss.add(when: 'CONFIG_GRLIB', if_true: files('grlib_irqmp.c'))
include/hw/intc/arm_gicv3_common.h +3 -0
@@ -309,6 +309,9 @@ typedef struct ARMGICv3CommonClass ARMGICv3CommonClass;DECLARE_OBJ_CHECKERS (GICv3State, ARMGICv3CommonClass,ARM_GICV3_COMMON ,TYPE_ARM_GICV3_COMMON ) +/* Types for GICv3 kernel-irqchip */ +#define TYPE_WHPX_GICV3 "whpx-arm-gicv3" +struct ARMGICv3CommonClass {/*< private >*/ SysBusDeviceClass parent_class;
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 11/23 whpx: add arm64 support
In reply to Mohamed Mediouni--- accel/whpx/whpx-common.c | 1 + target/arm/meson.build | 1 + target/arm/whpx/meson.build | 3 + target/arm/whpx/whpx-all.c | 848 ++++++++++++++++++++++++++++++++++++ 4 files changed, 853 insertions(+) create mode 100644 target/arm/whpx/meson.build create mode 100644 target/arm/whpx/whpx-all.c
accel/whpx/whpx-common.c +1 -0
@@ -16,6 +16,7 @@#include "gdbstub/helpers.h" #include "qemu/accel.h" #include "accel/accel-ops.h" +#include "system/memory.h" #include "system/whpx.h" #include "system/cpus.h" #include "system/runstate.h"
target/arm/meson.build +1 -0
@@ -48,6 +48,7 @@ arm_common_system_ss.add(files( )) subdir('hvf') +subdir('whpx') if 'CONFIG_TCG' in config_all_accel subdir('tcg')
target/arm/whpx/meson.build new file +3 -0
@@ -0,0 +1,3 @@ +arm_system_ss.add(when: 'CONFIG_WHPX', if_true: files( + 'whpx-all.c', +))
target/arm/whpx/whpx-all.c new file +848 -0
848 lines not on this page · raw message
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v6 11/23] whpx: add arm64 support
Hi Mohamed,
Quoted 226 lines · Mohamed Mediouni
Signed-off-by Mohamed Mediouni <[email protected]>Reviewed-by Pierrick Bouvier <[email protected]>--- accel/whpx/whpx-common.c | 1 + target/arm/meson.build | 1 + target/arm/whpx/meson.build | 3 + target/arm/whpx/whpx-all.c | 848 ++++++++++++++++++++++++++++++++++++ 4 files changed, 853 insertions(+)create mode 100644 target/arm/whpx/meson.build
create mode 100644target/arm/whpx/whpx-all.ctarget/arm/whpx/whpx-all.c new file +213
-0+struct whpx_reg_match { +WHV_REGISTER_NAME reg; +uint64_t offset; +}; + +static const struct whpx_reg_match whpx_reg_match[] = { + { WHvArm64RegisterX0, offsetof(CPUARMState, xregs[0]) }, + { WHvArm64RegisterX1, offsetof(CPUARMState, xregs[1]) }, + { WHvArm64RegisterX2, offsetof(CPUARMState, xregs[2]) }, + { WHvArm64RegisterX3, offsetof(CPUARMState, xregs[3]) }, + { WHvArm64RegisterX4, offsetof(CPUARMState, xregs[4]) }, + { WHvArm64RegisterX5, offsetof(CPUARMState, xregs[5]) }, + { WHvArm64RegisterX6, offsetof(CPUARMState, xregs[6]) }, + { WHvArm64RegisterX7, offsetof(CPUARMState, xregs[7]) }, + { WHvArm64RegisterX8, offsetof(CPUARMState, xregs[8]) }, + { WHvArm64RegisterX9, offsetof(CPUARMState, xregs[9]) }, + { WHvArm64RegisterX10, offsetof(CPUARMState, xregs[10]) }, + { WHvArm64RegisterX11, offsetof(CPUARMState, xregs[11]) }, + { WHvArm64RegisterX12, offsetof(CPUARMState, xregs[12]) }, + { WHvArm64RegisterX13, offsetof(CPUARMState, xregs[13]) }, + { WHvArm64RegisterX14, offsetof(CPUARMState, xregs[14]) }, + { WHvArm64RegisterX15, offsetof(CPUARMState, xregs[15]) }, + { WHvArm64RegisterX16, offsetof(CPUARMState, xregs[16]) }, + { WHvArm64RegisterX17, offsetof(CPUARMState, xregs[17]) }, + { WHvArm64RegisterX18, offsetof(CPUARMState, xregs[18]) }, + { WHvArm64RegisterX19, offsetof(CPUARMState, xregs[19]) }, + { WHvArm64RegisterX20, offsetof(CPUARMState, xregs[20]) }, + { WHvArm64RegisterX21, offsetof(CPUARMState, xregs[21]) }, + { WHvArm64RegisterX22, offsetof(CPUARMState, xregs[22]) }, + { WHvArm64RegisterX23, offsetof(CPUARMState, xregs[23]) }, + { WHvArm64RegisterX24, offsetof(CPUARMState, xregs[24]) }, + { WHvArm64RegisterX25, offsetof(CPUARMState, xregs[25]) }, + { WHvArm64RegisterX26, offsetof(CPUARMState, xregs[26]) }, + { WHvArm64RegisterX27, offsetof(CPUARMState, xregs[27]) }, + { WHvArm64RegisterX28, offsetof(CPUARMState, xregs[28]) }, + { WHvArm64RegisterFp, offsetof(CPUARMState, xregs[29]) }, + { WHvArm64RegisterLr, offsetof(CPUARMState, xregs[30]) }, + { WHvArm64RegisterPc, offsetof(CPUARMState , pc) }, +}; + +static const struct whpx_reg_match whpx_fpreg_match[] = { + { WHvArm64RegisterQ0, offsetof(CPUARMState, vfp.zregs[0]) }, + { WHvArm64RegisterQ1, offsetof(CPUARMState, vfp.zregs[1]) }, + { WHvArm64RegisterQ2, offsetof(CPUARMState, vfp.zregs[2]) }, + { WHvArm64RegisterQ3, offsetof(CPUARMState, vfp.zregs[3]) }, + { WHvArm64RegisterQ4, offsetof(CPUARMState, vfp.zregs[4]) }, + { WHvArm64RegisterQ5, offsetof(CPUARMState, vfp.zregs[5]) }, + { WHvArm64RegisterQ6, offsetof(CPUARMState, vfp.zregs[6]) }, + { WHvArm64RegisterQ7, offsetof(CPUARMState, vfp.zregs[7]) }, + { WHvArm64RegisterQ8, offsetof(CPUARMState, vfp.zregs[8]) }, + { WHvArm64RegisterQ9, offsetof(CPUARMState, vfp.zregs[9]) }, + { WHvArm64RegisterQ10, offsetof(CPUARMState, vfp.zregs[10]) }, + { WHvArm64RegisterQ11, offsetof(CPUARMState, vfp.zregs[11]) }, + { WHvArm64RegisterQ12, offsetof(CPUARMState, vfp.zregs[12]) }, + { WHvArm64RegisterQ13, offsetof(CPUARMState, vfp.zregs[13]) }, + { WHvArm64RegisterQ14, offsetof(CPUARMState, vfp.zregs[14]) }, + { WHvArm64RegisterQ15, offsetof(CPUARMState, vfp.zregs[15]) }, + { WHvArm64RegisterQ16, offsetof(CPUARMState, vfp.zregs[16]) }, + { WHvArm64RegisterQ17, offsetof(CPUARMState, vfp.zregs[17]) }, + { WHvArm64RegisterQ18, offsetof(CPUARMState, vfp.zregs[18]) }, + { WHvArm64RegisterQ19, offsetof(CPUARMState, vfp.zregs[19]) }, + { WHvArm64RegisterQ20, offsetof(CPUARMState, vfp.zregs[20]) }, + { WHvArm64RegisterQ21, offsetof(CPUARMState, vfp.zregs[21]) }, + { WHvArm64RegisterQ22, offsetof(CPUARMState, vfp.zregs[22]) }, + { WHvArm64RegisterQ23, offsetof(CPUARMState, vfp.zregs[23]) }, + { WHvArm64RegisterQ24, offsetof(CPUARMState, vfp.zregs[24]) }, + { WHvArm64RegisterQ25, offsetof(CPUARMState, vfp.zregs[25]) }, + { WHvArm64RegisterQ26, offsetof(CPUARMState, vfp.zregs[26]) }, + { WHvArm64RegisterQ27, offsetof(CPUARMState, vfp.zregs[27]) }, + { WHvArm64RegisterQ28, offsetof(CPUARMState, vfp.zregs[28]) }, + { WHvArm64RegisterQ29, offsetof(CPUARMState, vfp.zregs[29]) }, + { WHvArm64RegisterQ30, offsetof(CPUARMState, vfp.zregs[30]) }, + { WHvArm64RegisterQ31, offsetof(CPUARMState, vfp.zregs[31]) }, +}; + +#define WHPX_SYSREG (crn, crm, op0, op1, op2) \ + ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2) + +struct whpx_sreg_match { +WHV_REGISTER_NAME reg; +uint32_t key; +bool global; +uint32_t cp_idx; +}; + +static struct whpx_sreg_match whpx_sreg_match[] = { + { WHvArm64RegisterDbgbvr0El1,WHPX_SYSREG (0 ,0 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr0El1,WHPX_SYSREG (0 ,0 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr0El1,WHPX_SYSREG (0 ,0 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr0El1,WHPX_SYSREG (0 ,0 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr0El1,WHPX_SYSREG (0 ,1 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr0El1,WHPX_SYSREG (0 ,1 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr0El1,WHPX_SYSREG (0 ,1 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr0El1,WHPX_SYSREG (0 ,1 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr2El1,WHPX_SYSREG (0 ,2 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr2El1,WHPX_SYSREG (0 ,2 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr2El1,WHPX_SYSREG (0 ,2 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr2El1,WHPX_SYSREG (0 ,2 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr3El1,WHPX_SYSREG (0 ,3 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr3El1,WHPX_SYSREG (0 ,3 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr3El1,WHPX_SYSREG (0 ,3 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr3El1,WHPX_SYSREG (0 ,3 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr4El1,WHPX_SYSREG (0 ,4 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr4El1,WHPX_SYSREG (0 ,4 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr4El1,WHPX_SYSREG (0 ,4 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr4El1,WHPX_SYSREG (0 ,4 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr5El1,WHPX_SYSREG (0 ,5 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr5El1,WHPX_SYSREG (0 ,5 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr5El1,WHPX_SYSREG (0 ,5 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr5El1,WHPX_SYSREG (0 ,5 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr6El1,WHPX_SYSREG (0 ,6 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr6El1,WHPX_SYSREG (0 ,6 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr6El1,WHPX_SYSREG (0 ,6 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr6El1,WHPX_SYSREG (0 ,6 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr7El1,WHPX_SYSREG (0 ,7 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr7El1,WHPX_SYSREG (0 ,7 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr7El1,WHPX_SYSREG (0 ,7 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr7El1,WHPX_SYSREG (0 ,7 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr8El1,WHPX_SYSREG (0 ,8 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr8El1,WHPX_SYSREG (0 ,8 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr8El1,WHPX_SYSREG (0 ,8 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr8El1,WHPX_SYSREG (0 ,8 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr9El1,WHPX_SYSREG (0 ,9 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr9El1,WHPX_SYSREG (0 ,9 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr9El1,WHPX_SYSREG (0 ,9 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr9El1,WHPX_SYSREG (0 ,9 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr10El1,WHPX_SYSREG (0 ,10 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr10El1,WHPX_SYSREG (0 ,10 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr10El1,WHPX_SYSREG (0 ,10 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr10El1,WHPX_SYSREG (0 ,10 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr11El1,WHPX_SYSREG (0 ,11 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr11El1,WHPX_SYSREG (0 ,11 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr11El1,WHPX_SYSREG (0 ,11 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr11El1,WHPX_SYSREG (0 ,11 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr12El1,WHPX_SYSREG (0 ,12 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr12El1,WHPX_SYSREG (0 ,12 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr12El1,WHPX_SYSREG (0 ,12 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr12El1,WHPX_SYSREG (0 ,12 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr13El1,WHPX_SYSREG (0 ,13 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr13El1,WHPX_SYSREG (0 ,13 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr13El1,WHPX_SYSREG (0 ,13 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr13El1,WHPX_SYSREG (0 ,13 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr14El1,WHPX_SYSREG (0 ,14 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr14El1,WHPX_SYSREG (0 ,14 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr14El1,WHPX_SYSREG (0 ,14 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr14El1,WHPX_SYSREG (0 ,14 ,2 ,0 ,7 ) }, + + { WHvArm64RegisterDbgbvr15El1,WHPX_SYSREG (0 ,15 ,2 ,0 ,4 ) }, + { WHvArm64RegisterDbgbcr15El1,WHPX_SYSREG (0 ,15 ,2 ,0 ,5 ) }, + { WHvArm64RegisterDbgwvr15El1,WHPX_SYSREG (0 ,15 ,2 ,0 ,6 ) }, + { WHvArm64RegisterDbgwcr15El1,WHPX_SYSREG (0 ,15 ,2 ,0 ,7 ) }, +#ifdef SYNC_NO_RAW_REGS +/* +* The registers below are manually synced on init because they are +* marked as NO_RAW. We still list them to make number space sync easier. +*/ + { WHvArm64RegisterMidrEl1,WHPX_SYSREG (0 ,0 ,3 ,0 ,0 ) }, + { WHvArm64RegisterMpidrEl1,WHPX_SYSREG (0 ,0 ,3 ,0 ,5 ) }, + { WHvArm64RegisterIdPfr0El1,WHPX_SYSREG (0 ,4 ,3 ,0 ,0 ) }, +#endif + { WHvArm64RegisterIdAa64Pfr1El1,WHPX_SYSREG (0 ,4 ,3 ,0 ,1 ), true }, + { WHvArm64RegisterIdAa64Dfr0El1,WHPX_SYSREG (0 ,5 ,3 ,0 ,0 ), true }, + { WHvArm64RegisterIdAa64Dfr1El1,WHPX_SYSREG (0 ,5 ,3 ,0 ,1 ), true }, + { WHvArm64RegisterIdAa64Isar0El1,WHPX_SYSREG (0 ,6 ,3 ,0 ,0 ), true }, + { WHvArm64RegisterIdAa64Isar1El1,WHPX_SYSREG (0 ,6 ,3 ,0 ,1 ), true }, +#ifdef SYNC_NO_MMFR0 +/* We keep the hardware MMFR0 around. HW limits are there anyway */ + { WHvArm64RegisterIdAa64Mmfr0El1,WHPX_SYSREG (0 ,7 ,3 ,0 ,0 ) }, +#endif + { WHvArm64RegisterIdAa64Mmfr1El1,WHPX_SYSREG (0 ,7 ,3 ,0 ,1 ), true }, + { WHvArm64RegisterIdAa64Mmfr2El1,WHPX_SYSREG (0 ,7 ,3 ,0 ,2 ), true }, + { WHvArm64RegisterIdAa64Mmfr3El1,WHPX_SYSREG (0 ,7 ,3 ,0 ,3 ), true }, + + { WHvArm64RegisterMdscrEl1,WHPX_SYSREG (0 ,2 ,2 ,0 ,2 ) }, + { WHvArm64RegisterSctlrEl1,WHPX_SYSREG (1 ,0 ,3 ,0 ,0 ) }, + { WHvArm64RegisterCpacrEl1,WHPX_SYSREG (1 ,0 ,3 ,0 ,2 ) }, + { WHvArm64RegisterTtbr0El1,WHPX_SYSREG (2 ,0 ,3 ,0 ,0 ) }, + { WHvArm64RegisterTtbr1El1,WHPX_SYSREG (2 ,0 ,3 ,0 ,1 ) }, + { WHvArm64RegisterTcrEl1,WHPX_SYSREG (2 ,0 ,3 ,0 ,2 ) }, + + { WHvArm64RegisterApiAKeyLoEl1,WHPX_SYSREG (2 ,1 ,3 ,0 ,0 ) }, + { WHvArm64RegisterApiAKeyHiEl1,WHPX_SYSREG (2 ,1 ,3 ,0 ,1 ) }, + { WHvArm64RegisterApiBKeyLoEl1,WHPX_SYSREG (2 ,1 ,3 ,0 ,2 ) }, + { WHvArm64RegisterApiBKeyHiEl1,WHPX_SYSREG (2 ,1 ,3 ,0 ,3 ) }, + { WHvArm64RegisterApdAKeyLoEl1,WHPX_SYSREG (2 ,2 ,3 ,0 ,0 ) }, + { WHvArm64RegisterApdAKeyHiEl1,WHPX_SYSREG (2 ,2 ,3 ,0 ,1 ) }, + { WHvArm64RegisterApdBKeyLoEl1,WHPX_SYSREG (2 ,2 ,3 ,0 ,2 ) }, + { WHvArm64RegisterApdBKeyHiEl1,WHPX_SYSREG (2 ,2 ,3 ,0 ,3 ) }, + { WHvArm64RegisterApgAKeyLoEl1,WHPX_SYSREG (2 ,3 ,3 ,0 ,0 ) }, + { WHvArm64RegisterApgAKeyHiEl1,WHPX_SYSREG (2 ,3 ,3 ,0 ,1 ) }, + + { WHvArm64RegisterSpsrEl1,WHPX_SYSREG (4 ,0 ,3 ,0 ,0 ) }, + { WHvArm64RegisterElrEl1,WHPX_SYSREG (4 ,0 ,3 ,0 ,1 ) }, + { WHvArm64RegisterSpEl1,WHPX_SYSREG (4 ,1 ,3 ,0 ,0 ) }, + { WHvArm64RegisterEsrEl1,WHPX_SYSREG (5 ,2 ,3 ,0 ,0 ) }, + { WHvArm64RegisterFarEl1,WHPX_SYSREG (6 ,0 ,3 ,0 ,0 ) }, + { WHvArm64RegisterParEl1,WHPX_SYSREG (7 ,4 ,3 ,0 ,0 ) }, + { WHvArm64RegisterMairEl1,WHPX_SYSREG (10 ,2 ,3 ,0 ,0 ) }, + { WHvArm64RegisterVbarEl1,WHPX_SYSREG (12 ,0 ,3 ,0 ,0 ) },
target/arm/whpx/whpx-all.c line 266
Quoted 10 lines
target/arm/whpx/whpx-all.c new file +10
-0+ { WHvArm64RegisterContextidrEl1, WHPX_SYSREG(13, 0, 3, 0, 1) }, + { WHvArm64RegisterTpidrEl1, WHPX_SYSREG(13, 0, 3, 0, 4) }, + { WHvArm64RegisterCntkctlEl1, WHPX_SYSREG(14, 1, 3, 0, 0) }, + { WHvArm64RegisterCsselrEl1, WHPX_SYSREG(0, 0, 3, 2, 0) }, + { WHvArm64RegisterTpidrEl0, WHPX_SYSREG(13, 0, 3, 3, 2) }, + { WHvArm64RegisterTpidrroEl0, WHPX_SYSREG(13, 0, 3, 3, 3) }, + { WHvArm64RegisterCntvCtlEl0, WHPX_SYSREG(14, 3, 3, 3, 1) }, + { WHvArm64RegisterCntvCvalEl0, WHPX_SYSREG(14, 3, 3, 3, 2) }, + { WHvArm64RegisterSpEl1, WHPX_SYSREG(4, 1, 3, 4, 0) }, +};
To ease maintenance, this array should follow this equivalent changeset:
$ git log --oneline a648af4885b~..bffe756ea10 bffe756ea10 target/arm/hvf: Sort the cpreg_indexes array 98c2af435e6 target/arm/hvf: Replace hvf_sreg_match with hvf_sreg_list e6728fb3492 target/arm/hvf: Remove hvf_sreg_match.key 7d4d89a4377 target/arm/hvf: Add KVMID_TO_HVF, HVF_TO_KVMID 8da60618b6d target/arm/hvf: Reorder DEF_SYSREG arguments a648af4885b target/arm/hvf: Split out sysreg.c.inc
PATCH v6 12/23 whpx: copy over memory management logic from hvf
In reply to Mohamed MediouniThis allows edk2 to work, although u-boot is still not functional.
--- accel/whpx/whpx-common.c | 201 ++++++++++++++++++++++++++++----------- 1 file changed, 147 insertions(+), 54 deletions(-)
accel/whpx/whpx-common.c +147 -54
@@ -258,89 +258,174 @@ void whpx_vcpu_kick(CPUState *cpu)* Memory support. */ -static void whpx_update_mapping (hwaddr start_pa,ram_addr_t size, -void *host_va,int add,int rom, -const char *name) +/* whpx_slot flags */ +#define WHPX_SLOT_LOG (1 << 0) +typedef struct whpx_slot { +uint64_t start; +uint64_t size; +uint8_t *mem; +int slot_id; +uint32_t flags; +MemoryRegion *region; +}whpx_slot ; + +typedef struct WHPXState { +whpx_slot slots[32 ]; +int num_slots; +}WHPXState ; + +WHPXState *whpx_state; + +struct mac_slot { +int present; +uint64_t size; +uint64_t gpa_start; +uint64_t gva; +}; + +struct mac_slot mac_slots[32 ]; + +static int do_whpx_set_memory (whpx_slot *slot,WHV_MAP_GPA_RANGE_FLAGS flags) {struct whpx_state *whpx = &whpx_global; +struct mac_slot *macslot;HRESULT hr; -/* -if (add) { -printf("WHPX: ADD PA:%p Size:%p, Host:%p, %s, '%s'\n", -(void*)start_pa, (void*)size, host_va, -(rom ? "ROM" : "RAM"), name); -} else { -printf("WHPX: DEL PA:%p Size:%p, Host:%p, '%s'\n", -(void*)start_pa, (void*)size, host_va, name); + macslot = &mac_slots[slot->slot_id]; + +if (macslot->present) { +if (macslot->size != slot->size) { + macslot->present =0 ; + hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, + macslot->gpa_start, macslot->size); +if (FAILED (hr)) { +abort (); + } + } } -*/ - -if (add) { - hr = whp_dispatch.WHvMapGpaRange (whpx->partition, - host_va, - start_pa, - size, - (WHvMapGpaRangeFlagRead | - WHvMapGpaRangeFlagExecute | - (rom ?0 : WHvMapGpaRangeFlagWrite))); - }else { - hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, - start_pa, - size); + +if (!slot->size) { +return 0 ; } -if (FAILED (hr)) { -error_report ("WHPX: Failed to %s GPA range '%s' PA:%p, Size:%p bytes," -" Host:%p, hr=%08lx" , - (add ?"MAP" :"UNMAP" ), name, - (void *)(uintptr_t )start_pa, (void *)size, host_va, hr); + macslot->present =1 ; + macslot->gpa_start = slot->start; + macslot->size = slot->size; + hr = whp_dispatch.WHvMapGpaRange (whpx->partition, + slot->mem, slot->start, slot->size, flags); +return 0 ; +} + +static whpx_slot *whpx_find_overlap_slot (uint64_t start,uint64_t size) +{ +whpx_slot *slot; +int x; +for (x =0 ; x < whpx_state->num_slots; ++x) { + slot = &whpx_state->slots[x]; +if (slot->size && start < (slot->start + slot->size) && + (start + size) > slot->start) { +return slot; + } } +return NULL ; } -static void whpx_process_section (MemoryRegionSection *section,int add) +static void whpx_set_phys_mem (MemoryRegionSection *section,bool add) { -MemoryRegion *mr = section->mr; -hwaddr start_pa = section->offset_within_address_space; -ram_addr_t size =int128_get64 (section->size); -unsigned int delta; -uint64_t host_va; +whpx_slot *mem; +MemoryRegion *area = section->mr; +bool writable = !area->readonly && !area->rom_device; +WHV_MAP_GPA_RANGE_FLAGS flags; +uint64_t page_size =qemu_real_host_page_size (); + +if (!memory_region_is_ram (area)) { +if (writable) { +return ; + }else if (!memory_region_is_romd (area)) { +/* +* If the memory device is not in romd_mode, then we actually want +* to remove the whpx memory slot so all accesses will trap. +*/ + add = false; + } + } -if (!memory_region_is_ram (mr)) { -return ; +if (!QEMU_IS_ALIGNED (int128_get64 (section->size), page_size) || + !QEMU_IS_ALIGNED (section->offset_within_address_space, page_size)) { +/* Not page aligned, so we can not map as RAM */ + add = false; } - delta =qemu_real_host_page_size () - (start_pa & ~qemu_real_host_page_mask ()); - delta &= ~qemu_real_host_page_mask (); -if (delta > size) { -return ; + mem =whpx_find_overlap_slot ( + section->offset_within_address_space, +int128_get64 (section->size)); + +if (mem && add) { +if (mem->size ==int128_get64 (section->size) && + mem->start == section->offset_within_address_space && + mem->mem == (memory_region_get_ram_ptr (area) + + section->offset_within_region)) { +return ;/* Same region was attempted to register, go away. */ + } + } + +/* Region needs to be reset. set the size to 0 and remap it. */ +if (mem) { + mem->size =0 ; +if (do_whpx_set_memory (mem,0 )) { +error_report ("Failed to reset overlapping slot" ); +abort (); + } } - start_pa += delta; - size -= delta; - size &=qemu_real_host_page_mask (); -if (!size || (start_pa & ~qemu_real_host_page_mask ())) { + +if (!add) {return ; } - host_va = (uintptr_t )memory_region_get_ram_ptr (mr) - + section->offset_within_region + delta; +if (area->readonly || + (!memory_region_is_ram (area) &&memory_region_is_romd (area))) { + flags = WHvMapGpaRangeFlagRead | WHvMapGpaRangeFlagExecute; + }else { + flags = WHvMapGpaRangeFlagRead | WHvMapGpaRangeFlagWrite + | WHvMapGpaRangeFlagExecute; + } + +/* Now make a new slot. */ +int x; + +for (x =0 ; x < whpx_state->num_slots; ++x) { + mem = &whpx_state->slots[x]; +if (!mem->size) { +break ; + } + } + +if (x == whpx_state->num_slots) { +error_report ("No free slots" ); +abort (); + } -whpx_update_mapping (start_pa, size, (void *)(uintptr_t )host_va, add, -memory_region_is_rom (mr), mr->name); + mem->size =int128_get64 (section->size); + mem->mem =memory_region_get_ram_ptr (area) + section->offset_within_region; + mem->start = section->offset_within_address_space; + mem->region = area; + +if (do_whpx_set_memory (mem, flags)) { +error_report ("Error registering new memory slot" ); +abort (); + } }static void whpx_region_add (MemoryListener *listener,MemoryRegionSection *section) { -memory_region_ref (section->mr); -whpx_process_section (section,1 ); +whpx_set_phys_mem (section, true); }static void whpx_region_del (MemoryListener *listener,MemoryRegionSection *section) { -whpx_process_section (section,0 ); -memory_region_unref (section->mr); +whpx_set_phys_mem (section, false); }static void whpx_transaction_begin (MemoryListener *listener)
@@ -524,6 +609,14 @@ static void whpx_accel_instance_init(Object *obj)memset (whpx,0 ,sizeof (struct whpx_state ));/* Turn on kernel-irqchip, by default */ whpx->kernel_irqchip_allowed = true; + +int x; + whpx_state =malloc (sizeof (WHPXState)); + whpx_state->num_slots =ARRAY_SIZE (whpx_state->slots); +for (x =0 ; x < whpx_state->num_slots; ++x) { + whpx_state->slots[x].size =0 ; + whpx_state->slots[x].slot_id = x; + } }static const TypeInfo whpx_accel_type = {
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v6 12/23] whpx: copy over memory management logic from hvf
Quoted 94 lines · Mohamed Mediouni
This allows edk2 to work, although u-boot is still not functional.
Signed-off-by Mohamed Mediouni <[email protected]>Reviewed-by Pierrick Bouvier <[email protected]>--- accel/whpx/whpx-common.c | 201 ++++++++++++++++++++++++++++----------- 1 file changed, 147 insertions(+), 54 deletions(-)accel/whpx/whpx-common.c +43
-27@@ -258,89 +258,174 @@ void whpx_vcpu_kick(CPUState *cpu)* Memory support. */ -static void whpx_update_mapping (hwaddr start_pa,ram_addr_t size, -void *host_va,int add,int rom, -const char *name) +/* whpx_slot flags */ +#define WHPX_SLOT_LOG (1 << 0) +typedef struct whpx_slot { +uint64_t start; +uint64_t size; +uint8_t *mem; +int slot_id; +uint32_t flags; +MemoryRegion *region; +}whpx_slot ; + +typedef struct WHPXState { +whpx_slot slots[32 ]; +int num_slots; +}WHPXState ; + +WHPXState *whpx_state; + +struct mac_slot { +int present; +uint64_t size; +uint64_t gpa_start; +uint64_t gva; +}; + +struct mac_slot mac_slots[32 ]; + +static int do_whpx_set_memory (whpx_slot *slot,WHV_MAP_GPA_RANGE_FLAGS flags) {struct whpx_state *whpx = &whpx_global; +struct mac_slot *macslot;HRESULT hr; -/* -if (add) { -printf("WHPX: ADD PA:%p Size:%p, Host:%p, %s, '%s'\n", -(void*)start_pa, (void*)size, host_va, -(rom ? "ROM" : "RAM"), name); -} else { -printf("WHPX: DEL PA:%p Size:%p, Host:%p, '%s'\n", -(void*)start_pa, (void*)size, host_va, name); + macslot = &mac_slots[slot->slot_id]; + +if (macslot->present) { +if (macslot->size != slot->size) { + macslot->present =0 ; + hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, + macslot->gpa_start, macslot->size); +if (FAILED (hr)) { +abort (); + } + } } -*/ - -if (add) { - hr = whp_dispatch.WHvMapGpaRange (whpx->partition, - host_va, - start_pa, - size, - (WHvMapGpaRangeFlagRead | - WHvMapGpaRangeFlagExecute | - (rom ?0 : WHvMapGpaRangeFlagWrite))); - }else { - hr = whp_dispatch.WHvUnmapGpaRange (whpx->partition, - start_pa, - size); + +if (!slot->size) { +return 0 ; } -if (FAILED (hr)) { - error_report("WHPX: Failed to %s GPA range '%s' PA:%p, Size:%p bytes,"
accel/whpx/whpx-common.c void whpx_vcpu_kick(CPUState *cpu) · line 317
Quoted 10 lines
accel/whpx/whpx-common.c +7
-3-" Host:%p, hr=%08lx" , - (add ?"MAP" :"UNMAP" ), name, - (void *)(uintptr_t)start_pa, (void *)size, host_va, hr); + macslot->present =1 ; + macslot->gpa_start = slot->start; + macslot->size = slot->size; + hr = whp_dispatch.WHvMapGpaRange (whpx->partition, + slot->mem, slot->start, slot->size, flags); +return 0 ; +}
[...]
This HVF code is bogus and Richard has been heavily reworking it. We haven't posted the changes so far, but IMHO it is worth waiting them to compare before proceeding with this series. I'll let Richard briefly explain what we had to change ;)
Regards,
Phil.
PATCH v6 13/23 target/arm: cpu: mark WHPX as supporting PSCI 1.3
In reply to Mohamed MediouniHyper-V supports PSCI 1.3, and that implementation is exposed through WHPX.
--- target/arm/cpu.c | 3 +++ 1 file changed, 3 insertions(+)
target/arm/cpu.c +3 -0
@@ -23,6 +23,7 @@#include "qemu/timer.h" #include "qemu/log.h" #include "exec/page-vary.h" +#include "system/whpx.h" #include "target/arm/idau.h" #include "qemu/module.h" #include "qapi/error.h"
@@ -1126,6 +1127,8 @@ static void arm_cpu_initfn(Object *obj)if (tcg_enabled () ||hvf_enabled ()) {/* TCG and HVF implement PSCI 1.1 */ cpu->psci_version =QEMU_PSCI_VERSION_1_1 ; + }else if (whpx_enabled ()) { + cpu->psci_version =QEMU_PSCI_VERSION_1_3 ; } }
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 14/23 hw/arm: virt: cleanly fail on attempt to use the platform vGIC together with ITS
In reply to Mohamed MediouniSwitch its to a tristate.
Windows Hypervisor Platform's vGIC doesn't support ITS. Deal with this by reporting to the user and exiting.
Regular configuration: GICv3 + ITS
New default configuration with WHPX: GICv3 with GICv2m
And its=off explicitly for the newest machine version: GICv3 + GICv2m
--- hw/arm/virt-acpi-build.c | 14 ++++++------ hw/arm/virt.c | 46 +++++++++++++++++++++++++++++++--------- include/hw/arm/virt.h | 4 +++- 3 files changed, 46 insertions(+), 18 deletions(-)
hw/arm/virt-acpi-build.c +7 -7
@@ -472,7 +472,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) nb_nodes = num_smmus +1 ;/* RC and SMMUv3 */ rc_mapping_count = rc_smmu_idmaps_len; -if (vms->its) { +if (virt_is_its_enabled (vms)) {/* * Knowing the ID ranges from the RC to the SMMU, it's possible to * determine the ID ranges from RC that go directly to ITS.
@@ -483,7 +483,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) rc_mapping_count += rc_its_idmaps->len; } }else { -if (vms->its) { +if (virt_is_its_enabled (vms)) { nb_nodes =2 ;/* RC and ITS */ rc_mapping_count =1 ;/* Direct map to ITS */ }else {
@@ -498,7 +498,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)build_append_int_noprefix (table_data,IORT_NODE_OFFSET ,4 );build_append_int_noprefix (table_data,0 ,4 );/* Reserved */ -if (vms->its) { +if (virt_is_its_enabled (vms)) {/* Table 12 ITS Group Format */ build_append_int_noprefix (table_data,0 /* ITS Group */ ,1 );/* Type */ node_size =20 /* fixed header size */ +4 /* 1 GIC ITS Identifier */ ;
@@ -517,7 +517,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)int smmu_mapping_count, offset_to_id_array;int irq = sdev->irq; -if (vms->its) { +if (virt_is_its_enabled (vms)) { smmu_mapping_count =1 ;/* ITS Group node */ offset_to_id_array =SMMU_V3_ENTRY_SIZE ;/* Just after the header */ }else {
@@ -610,7 +610,7 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } } -if (vms->its) { +if (virt_is_its_enabled (vms)) {/* * Map bypassed (don't go through the SMMU) RIDs (input) to * ITS Group node directly: RC -> ITS.
@@ -945,7 +945,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) memmap[VIRT_HIGH_GIC_REDIST2].size); } -if (vms->its) { +if (virt_is_its_enabled (vms)) {/* * ACPI spec, Revision 6.0 Errata A * (original 6.0 definition has invalid Length)
@@ -961,7 +961,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) } } -if (!vms->its && !vms->no_gicv3_with_gicv2m) { +if (!virt_is_its_enabled (vms) && !vms->no_gicv3_with_gicv2m) {const uint16_t spi_base = vms->irqmap[VIRT_GIC_V2M ] +ARM_SPI_BASE ;/* 5.2.12.16 GIC MSI Frame Structure */
hw/arm/virt.c +36 -10
90 lines not on this page · raw message
include/hw/arm/virt.h +3 -1
@@ -148,7 +148,7 @@ struct VirtMachineState {bool highmem_ecam;bool highmem_mmio;bool highmem_redists; -bool its; +OnOffAuto its;bool tcg_its;bool virt;bool ras;
@@ -216,4 +216,6 @@ static inline int virt_gicv3_redist_region_count(VirtMachineState *vms) vms->highmem_redists) ? 2 : 1; } +bool virt_is_its_enabled (VirtMachineState *vms); +#endif /* QEMU_ARM_VIRT_H */
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 15/23 whpx: arm64: clamp down IPA size
In reply to Mohamed MediouniCode taken from HVF and adapted for WHPX use. Note that WHPX doesn't have a default vs maximum IPA distinction.
--- hw/arm/virt.c | 32 ++++++++++++++++++++++++++ include/hw/boards.h | 1 + target/arm/whpx/meson.build | 2 ++ target/arm/whpx/whpx-all.c | 45 +++++++++++++++++++++++++++++++++++++ target/arm/whpx/whpx-stub.c | 15 +++++++++++++ target/arm/whpx_arm.h | 16 +++++++++++++ 6 files changed, 111 insertions(+) create mode 100644 target/arm/whpx/whpx-stub.c create mode 100644 target/arm/whpx_arm.h
hw/arm/virt.c +32 -0
@@ -70,6 +70,7 @@#include "hw/irq.h" #include "kvm_arm.h" #include "hvf_arm.h" +#include "whpx_arm.h" #include "hw/firmware/smbios.h" #include "qapi/visitor.h" #include "qapi/qapi-visit-common.h"
@@ -3236,6 +3237,36 @@ static int virt_kvm_type(MachineState *ms, const char *type_str)return fixed_ipa ?0 : requested_pa_size; } +static int virt_whpx_get_physical_address_range (MachineState *ms) +{ +VirtMachineState *vms =VIRT_MACHINE (ms); + +int max_ipa_size =whpx_arm_get_ipa_bit_size (); + +/* We freeze the memory map to compute the highest gpa */ +virt_set_memmap (vms, max_ipa_size); + +int requested_ipa_size =64 -clz64 (vms->highest_gpa); + +/* +* If we're <= the default IPA size just use the default. +* If we're above the default but below the maximum, round up to +* the maximum. hvf_arm_get_max_ipa_bit_size() conveniently only +* returns values that are valid ARM PARange values. +*/ +if (requested_ipa_size <= max_ipa_size) { + requested_ipa_size = max_ipa_size; + }else { +error_report ("-m and ,maxmem option values " +"require an IPA range (%d bits) larger than " +"the one supported by the host (%d bits)" , + requested_ipa_size, max_ipa_size); +return -1 ; + } + +return requested_ipa_size; +} +static int virt_hvf_get_physical_address_range (MachineState *ms) {VirtMachineState *vms =VIRT_MACHINE (ms);
@@ -3328,6 +3359,7 @@ static void virt_machine_class_init(ObjectClass *oc, const void *data) mc->get_default_cpu_node_id = virt_get_default_cpu_node_id; mc->kvm_type = virt_kvm_type; mc->hvf_get_physical_address_range = virt_hvf_get_physical_address_range; + mc->whpx_get_physical_address_range = virt_whpx_get_physical_address_range;assert (!mc->get_hotplug_handler); mc->get_hotplug_handler = virt_machine_get_hotplug_handler; hc->pre_plug = virt_machine_device_pre_plug_cb;
include/hw/boards.h +1 -0
@@ -276,6 +276,7 @@ struct MachineClass {void (*wakeup)(MachineState *state);int (*kvm_type)(MachineState *machine,const char *arg);int (*hvf_get_physical_address_range)(MachineState *machine); +int (*whpx_get_physical_address_range)(MachineState *machine);BlockInterfaceType block_default_type;int units_per_default_bus;
target/arm/whpx/meson.build +2 -0
@@ -1,3 +1,5 @@ arm_system_ss.add(when: 'CONFIG_WHPX', if_true: files( 'whpx-all.c', )) + +arm_common_system_ss.add(when: 'CONFIG_WHPX', if_false: files('whpx-stub.c'))
target/arm/whpx/whpx-all.c +45 -0
75 lines not on this page · raw message
target/arm/whpx/whpx-stub.c new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* WHPX stubs for ARM +* +* Copyright (c) 2025 Mohamed Mediouni +* +*/ + +#include "qemu/osdep.h" +#include "whpx_arm.h" + +uint32_t whpx_arm_get_ipa_bit_size (void ) +{ +g_assert_not_reached (); +}
target/arm/whpx_arm.h new file +16 -0
@@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* +* WHPX support -- ARM specifics +* +* Copyright (c) 2025 Mohamed Mediouni +* +*/ + +#ifndef QEMU_WHPX_ARM_H +#define QEMU_WHPX_ARM_H + +#include "target/arm/cpu-qom.h" + +uint32_t whpx_arm_get_ipa_bit_size (void ); + +#endif
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 16/23 hw/arm, accel/hvf, whpx: unify get_physical_address_range between WHPX and HVF
In reply to Mohamed Mediouni--- accel/hvf/hvf-all.c | 7 +++++-- hw/arm/virt.c | 41 ++++---------------------------------- include/hw/boards.h | 4 ++-- include/system/hvf_int.h | 2 ++ target/arm/hvf-stub.c | 20 ------------------- target/arm/hvf/hvf.c | 6 +++--- target/arm/hvf_arm.h | 3 --- target/arm/meson.build | 1 - target/arm/whpx/whpx-all.c | 5 +++-- target/i386/hvf/hvf.c | 11 ++++++++++ 10 files changed, 30 insertions(+), 70 deletions(-) delete mode 100644 target/arm/hvf-stub.c
accel/hvf/hvf-all.c +5 -2
@@ -17,6 +17,7 @@#include "system/hvf_int.h" #include "hw/core/cpu.h" #include "hw/boards.h" +#include "target/arm/hvf_arm.h" #include "trace.h" bool hvf_allowed;
@@ -256,8 +257,10 @@ static int hvf_accel_init(AccelState *as, MachineState *ms)int pa_range =36 ;MachineClass *mc =MACHINE_GET_CLASS (ms); -if (mc->hvf_get_physical_address_range) { - pa_range = mc->hvf_get_physical_address_range (ms); + +if (mc->get_physical_address_range) { + pa_range = mc->get_physical_address_range (ms, +hvf_arch_get_default_ipa_bit_size (),hvf_arch_get_max_ipa_bit_size ());if (pa_range <0 ) {return -EINVAL ; }
hw/arm/virt.c +4 -37
62 lines not on this page · raw message
include/hw/boards.h +2 -2
@@ -275,8 +275,8 @@ struct MachineClass {void (*reset)(MachineState *state,ResetType type);void (*wakeup)(MachineState *state);int (*kvm_type)(MachineState *machine,const char *arg); -int (*hvf_get_physical_address_range)(MachineState *machine); -int (*whpx_get_physical_address_range)(MachineState *machine); +int (*get_physical_address_range)(MachineState *machine, +int default_ipa_size,int max_ipa_size);BlockInterfaceType block_default_type;int units_per_default_bus;
include/system/hvf_int.h +2 -0
@@ -71,6 +71,8 @@ void assert_hvf_ok_impl(hv_return_t ret, const char *file, unsigned int line,const char *hvf_return_string (hv_return_t ret);int hvf_arch_init (void );hv_return_t hvf_arch_vm_create (MachineState *ms,uint32_t pa_range); +uint32_t hvf_arch_get_default_ipa_bit_size (void ); +uint32_t hvf_arch_get_max_ipa_bit_size (void );int hvf_arch_init_vcpu (CPUState *cpu);void hvf_arch_vcpu_destroy (CPUState *cpu);int hvf_vcpu_exec (CPUState *);
target/arm/hvf-stub.c deleted +0 -20
@@ -1,20 +0,0 @@ -/* -* QEMU Hypervisor.framework (HVF) stubs for ARM -* -* Copyright (c) Linaro -* -* SPDX-License-Identifier: GPL-2.0-or-later -*/ - -#include "qemu/osdep.h" -#include "hvf_arm.h" - -uint32_t hvf_arm_get_default_ipa_bit_size (void ) -{ -g_assert_not_reached (); -} - -uint32_t hvf_arm_get_max_ipa_bit_size (void ) -{ -g_assert_not_reached (); -}
target/arm/hvf/hvf.c +3 -3
@@ -850,7 +850,7 @@ static uint64_t hvf_get_reg(CPUState *cpu, int rt)static void clamp_id_aa64mmfr0_parange_to_ipa_size (ARMISARegisters *isar) {uint32_t ipa_size = chosen_ipa_bit_size ? - chosen_ipa_bit_size :hvf_arm_get_max_ipa_bit_size (); + chosen_ipa_bit_size :hvf_arch_get_max_ipa_bit_size ();uint64_t id_aa64mmfr0;/* Clamp down the PARange to the IPA size the kernel supports. */
@@ -940,7 +940,7 @@ static bool hvf_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)return r ==HV_SUCCESS ; } -uint32_t hvf_arm_get_default_ipa_bit_size (void ) +uint32_t hvf_arch_get_default_ipa_bit_size (void ) {uint32_t default_ipa_size;hv_return_t ret =hv_vm_config_get_default_ipa_size (&default_ipa_size);
@@ -949,7 +949,7 @@ uint32_t hvf_arm_get_default_ipa_bit_size(void)return default_ipa_size; } -uint32_t hvf_arm_get_max_ipa_bit_size (void ) +uint32_t hvf_arch_get_max_ipa_bit_size (void ) {uint32_t max_ipa_size;hv_return_t ret =hv_vm_config_get_max_ipa_size (&max_ipa_size);
target/arm/hvf_arm.h +0 -3
@@ -22,7 +22,4 @@ void hvf_arm_init_debug(void);void hvf_arm_set_cpu_features_from_host (ARMCPU *cpu); -uint32_t hvf_arm_get_default_ipa_bit_size (void ); -uint32_t hvf_arm_get_max_ipa_bit_size (void ); -#endif
target/arm/meson.build +0 -1
@@ -33,7 +33,6 @@ arm_common_system_ss.add(files('cpu.c')) arm_common_system_ss.add(when: 'TARGET_AARCH64', if_false: files( 'cpu32-stubs.c')) arm_common_system_ss.add(when: 'CONFIG_KVM', if_false: files('kvm-stub.c')) -arm_common_system_ss.add(when: 'CONFIG_HVF', if_false: files('hvf-stub.c')) arm_common_system_ss.add(files( 'arch_dump.c', 'arm-powerctl.c',
target/arm/whpx/whpx-all.c +3 -2
@@ -808,8 +808,9 @@ int whpx_accel_init(AccelState *as, MachineState *ms) goto error; } -if (mc->whpx_get_physical_address_range) { - pa_range = mc->whpx_get_physical_address_range (ms); +if (mc->get_physical_address_range) { + pa_range = mc->get_physical_address_range (ms, +whpx_arm_get_ipa_bit_size (),whpx_arm_get_ipa_bit_size ());if (pa_range <0 ) {return -EINVAL ; }
target/i386/hvf/hvf.c +11 -0
@@ -225,6 +225,17 @@ int hvf_arch_init(void)return 0 ; } +/* 48-bit on all Intel Macs. Function currently unused. */ +uint32_t hvf_arch_get_default_ipa_bit_size (void ) +{ +g_assert_not_reached (); +} + +uint32_t hvf_arch_get_max_ipa_bit_size (void ) +{ +g_assert_not_reached (); +} +hv_return_t hvf_arch_vm_create (MachineState *ms,uint32_t pa_range) {return hv_vm_create (HV_VM_DEFAULT );
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 17/23 whpx: arm64: implement -cpu host
In reply to Mohamed MediouniLogic to fetch MIDR_EL1 for cpu 0 adapted from:
https://github.com/FEX-Emu/FEX/blob/e6de17e72ef03aa88ba14fa0ec13163061608c74/Source/Windows/Common/CPUFeatures.cpp#L62
--- hw/arm/virt.c | 2 +- target/arm/cpu64.c | 19 ++++--- target/arm/whpx/whpx-all.c | 104 +++++++++++++++++++++++++++++++++++++ target/arm/whpx_arm.h | 1 + 4 files changed, 119 insertions(+), 7 deletions(-)
hw/arm/virt.c +1 -1
@@ -3291,7 +3291,7 @@ static void virt_machine_class_init(ObjectClass *oc, const void *data)#ifdef TARGET_AARCH64 ARM_CPU_TYPE_NAME("cortex-a53"), ARM_CPU_TYPE_NAME("cortex-a57"), -#if defined(CONFIG_KVM ) || defined(CONFIG_HVF ) +#if defined(CONFIG_KVM ) || defined(CONFIG_HVF ) || defined(CONFIG_WHPX ) ARM_CPU_TYPE_NAME("host"),#endif /* CONFIG_KVM || CONFIG_HVF */ #endif /* TARGET_AARCH64 */
target/arm/cpu64.c +13 -6
@@ -26,10 +26,13 @@#include "qemu/units.h" #include "system/kvm.h" #include "system/hvf.h" +#include "system/whpx.h" +#include "system/hw_accel.h" #include "system/qtest.h" #include "system/tcg.h" #include "kvm_arm.h" #include "hvf_arm.h" +#include "whpx_arm.h" #include "qapi/visitor.h" #include "hw/qdev-properties.h" #include "internals.h"
@@ -522,7 +525,7 @@ void arm_cpu_pauth_finalize(ARMCPU *cpu, Error **errp) isar2 =FIELD_DP64 (isar2,ID_AA64ISAR2 ,APA3 ,0 ); isar2 =FIELD_DP64 (isar2,ID_AA64ISAR2 ,GPA3 ,0 ); -if (kvm_enabled () ||hvf_enabled ()) { +if (hwaccel_enabled ()) {/* * Exit early if PAuth is enabled and fall through to disable it. * The algorithm selection properties are not present.
@@ -599,10 +602,10 @@ void aarch64_add_pauth_properties(Object *obj)/* Default to PAUTH on, with the architected algorithm on TCG. */ qdev_property_add_static (DEVICE (obj), &arm_cpu_pauth_property); -if (kvm_enabled () ||hvf_enabled ()) { +if (hwaccel_enabled ()) {/* * Mirror PAuth support from the probed sysregs back into the -* property for KVM or hvf. Is it just a bit backward? Yes it is! +* property for HW accel. Is it just a bit backward? Yes it is! * Note that prop_pauth is true whether the host CPU supports the * architected QARMA5 algorithm or the IMPDEF one. We don't * provide the separate pauth-impdef property for KVM or hvf,
@@ -773,6 +776,10 @@ static void aarch64_host_initfn(Object *obj)ARMCPU *cpu =ARM_CPU (obj);hvf_arm_set_cpu_features_from_host (cpu);aarch64_add_pauth_properties (obj); +#elif defined(CONFIG_WHPX ) +ARMCPU *cpu =ARM_CPU (obj); +whpx_arm_set_cpu_features_from_host (cpu); +aarch64_add_pauth_properties (obj);#else g_assert_not_reached ();#endif
@@ -780,8 +787,8 @@ static void aarch64_host_initfn(Object *obj)static void aarch64_max_initfn (Object *obj) { -if (kvm_enabled () ||hvf_enabled ()) { -/* With KVM or HVF, '-cpu max' is identical to '-cpu host' */ +if (hwaccel_enabled ()) { +/* When hardware acceleration enabled, '-cpu max' is identical to '-cpu host' */ aarch64_host_initfn (obj);return ; }
@@ -800,7 +807,7 @@ static const ARMCPUInfo aarch64_cpus[] = { { .name = "cortex-a57", .initfn = aarch64_a57_initfn }, { .name = "cortex-a53", .initfn = aarch64_a53_initfn }, { .name = "max", .initfn = aarch64_max_initfn }, -#if defined(CONFIG_KVM) || defined(CONFIG_HVF) +#if defined(CONFIG_KVM) || defined(CONFIG_HVF) || defined(CONFIG_WHPX) { .name = "host", .initfn = aarch64_host_initfn }, #endif };
target/arm/whpx/whpx-all.c +104 -0
116 lines not on this page · raw message
target/arm/whpx_arm.h +1 -0
@@ -12,5 +12,6 @@#include "target/arm/cpu-qom.h" uint32_t whpx_arm_get_ipa_bit_size (void ); +void whpx_arm_set_cpu_features_from_host (ARMCPU *cpu);#endif
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 18/23 target/arm: whpx: instantiate GIC early
In reply to Mohamed MediouniWhile figuring out a better spot for it, put it in whpx_accel_init.
Needs to be done before WHvSetupPartition.
--- target/arm/whpx/whpx-all.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)
target/arm/whpx/whpx-all.c +23 -0
@@ -976,6 +976,29 @@ int whpx_accel_init(AccelState *as, MachineState *ms)memset (&prop,0 ,sizeof (WHV_PARTITION_PROPERTY )); +WHV_ARM64_IC_PARAMETERS ic_params = { + .EmulationMode = WHvArm64IcEmulationModeGicV3, + .GicV3Parameters = { + .GicdBaseAddress =0x08000000 , + .GitsTranslaterBaseAddress =0x08080000 , + .GicLpiIntIdBits =0 , + .GicPpiPerformanceMonitorsInterrupt =VIRTUAL_PMU_IRQ , + .GicPpiOverflowInterruptFromCntv =ARCH_TIMER_VIRT_IRQ + } + }; + prop.Arm64IcParameters = ic_params; + + hr = whp_dispatch.WHvSetPartitionProperty ( + whpx->partition, + WHvPartitionPropertyCodeArm64IcParameters, + &prop, +sizeof (WHV_PARTITION_PROPERTY )); +if (FAILED (hr)) { +error_report ("WHPX: Failed to enable GICv3 interrupt controller, hr=%08lx" , hr); + ret = -EINVAL ; + goto error; + } + hr = whp_dispatch.WHvSetupPartition (whpx->partition);if (FAILED (hr)) {error_report ("WHPX: Failed to setup partition, hr=%08lx" , hr);
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 19/23 whpx: arm64: gicv3: add migration blocker
In reply to Mohamed MediouniGICv3 state save-restore is currently not implemented yet.
--- hw/intc/arm_gicv3_whpx.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
hw/intc/arm_gicv3_whpx.c +10 -0
@@ -17,6 +17,7 @@#include "system/whpx-internal.h" #include "gicv3_internal.h" #include "vgic_common.h" +#include "migration/blocker.h" #include "qom/object.h" #include "target/arm/cpregs.h"
@@ -205,6 +206,15 @@ static void whpx_gicv3_realize(DeviceState *dev, Error **errp)error_setg (errp,"Nested virtualisation not currently supported by WHPX." );return ; } + +Error *whpx_migration_blocker =NULL ; + +error_setg (&whpx_migration_blocker, +"Live migration disabled because GIC state save/restore not supported on WHPX" ); +if (migrate_add_blocker (&whpx_migration_blocker, errp)) { +error_free (whpx_migration_blocker); +return ; + } }static void whpx_gicv3_class_init (ObjectClass *klass,const void *data)
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 20/23 whpx: enable arm64 builds
In reply to Mohamed Mediouni--- meson.build | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
meson.build +14 -7
@@ -327,7 +327,8 @@ accelerator_targets += { 'CONFIG_XEN': xen_targets } if cpu == 'aarch64' accelerator_targets += { - 'CONFIG_HVF': ['aarch64-softmmu'] + 'CONFIG_HVF': ['aarch64-softmmu'], + 'CONFIG_WHPX': ['aarch64-softmmu'] } elif cpu == 'x86_64' accelerator_targets += {
@@ -880,14 +881,20 @@ accelerators = [] if get_option('kvm').allowed() and host_os == 'linux' accelerators += 'CONFIG_KVM' endif + if get_option('whpx').allowed() and host_os == 'windows' - if get_option('whpx').enabled() and host_machine.cpu() != 'x86_64' - error('WHPX requires 64-bit host') - elif cc.has_header('winhvplatform.h', required: get_option('whpx')) and \ - cc.has_header('winhvemulation.h', required: get_option('whpx')) - accelerators += 'CONFIG_WHPX' + if cpu == 'i386' + if get_option('whpx').enabled() + error('WHPX requires 64-bit host') + endif + # Leave CONFIG_WHPX disabled + else + if cc.has_header('winhvplatform.h', required: get_option('whpx')) and \ + cc.has_header('winhvemulation.h', required: get_option('whpx')) + accelerators += 'CONFIG_WHPX' + endif endif -endif + endif hvf = not_found if get_option('hvf').allowed()
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 21/23 MAINTAINERS: update maintainers for WHPX
In reply to Mohamed MediouniAnd add arm64 files.
From Pedro Barbuda (on Teams):
Quoted 1 line
we meant to have that switched a while back. you can add me as the maintainer. Pedro Barbuda ([email protected])
--- MAINTAINERS | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
MAINTAINERS +5 -2
@@ -544,11 +544,14 @@ F: accel/stubs/hvf-stub.c F: include/system/hvf.h F: include/system/hvf_int.h -WHPX CPUs -M: Sunil Muthuswamy <[email protected]> +WHPX +M: Pedro Barbuda <[email protected]> +M: Mohamed Mediouni <[email protected]> S: Supported F: accel/whpx/ F: target/i386/whpx/ +F: target/arm/whpx_arm.h +F: target/arm/whpx/ F: accel/stubs/whpx-stub.c F: include/system/whpx.h F: include/system/whpx-accel-ops.h
Signature · 1 line
2.50.1 (Apple Git-155)
PATCH v6 22/23 docs: arm: update virt machine model description
In reply to Mohamed MediouniUpdate the documentation to match current QEMU.
Remove the mention of pre-2.7 machine models as those aren't provided anymore.
--- docs/system/arm/virt.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
docs/system/arm/virt.rst +5 -5
@@ -40,9 +40,10 @@ The virt board supports: - An optional SMMUv3 IOMMU - hotpluggable DIMMs - hotpluggable NVDIMMs -- An MSI controller (GICv2M or ITS). GICv2M is selected by default along - with GICv2. ITS is selected by default with GICv3 (>= virt-2.7). Note - that ITS is not modeled in TCG mode. +- An MSI controller (GICv2m or ITS). + - When using a GICv3, ITS is selected by default when available on the platform. + - If using a GICv2 or when ITS is not available, a GICv2m is provided by default instead. + - Before virt-10.2, a GICv2m is not provided when the ITS is disabled. - 32 virtio-mmio transport devices - running guests using the KVM accelerator on aarch64 hardware - large amounts of RAM (at least 255GB, and more if using highmem)
@@ -167,8 +168,7 @@ gic-version ``4`` if ``virtualization`` is ``on``, but this may change in future) its - Set ``on``/``off`` to enable/disable ITS instantiation. The default is ``on`` - for machine types later than ``virt-2.7``. + Set ``on``/``off``/``auto`` to control ITS instantiation. The default is ``auto``. iommu Set the IOMMU type to create for the guest. Valid values are:
Signature · 1 line
2.50.1 (Apple Git-155)
Re: [PATCH v6 22/23] docs: arm: update virt machine model description
Quoted 30 lines · Mohamed Mediouni
Update the documentation to match current QEMU.
Remove the mention of pre-2.7 machine models as those aren't provided anymore.
Signed-off-by Mohamed Mediouni <[email protected]>--- docs/system/arm/virt.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)docs/system/arm/virt.rst +4
-3@@ -40,9 +40,10 @@ The virt board supports: - An optional SMMUv3 IOMMU - hotpluggable DIMMs - hotpluggable NVDIMMs -- An MSI controller (GICv2M or ITS). GICv2M is selected by default along - with GICv2. ITS is selected by default with GICv3 (>= virt-2.7). Note - that ITS is not modeled in TCG mode. +- An MSI controller (GICv2m or ITS). + - When using a GICv3, ITS is selected by default when available on the platform. + - If using a GICv2 or when ITS is not available, a GICv2m is provided by default instead. + - Before virt-10.2, a GICv2m is not provided when the ITS is disabled. - 32 virtio-mmio transport devices - running guests using the KVM accelerator on aarch64 hardware - large amounts of RAM (at least 255GB, and more if using highmem)
docs/system/arm/virt.rst gic-version · line 171
Quoted 6 lines
docs/system/arm/virt.rst +1
-2@@ -167,8 +168,7 @@ gic-version ``4`` if ``virtualization`` is ``on``, but this may change in future) its - Set ``on``/``off`` to enable/disable ITS instantiation. The default is ``on`` - for machine types later than ``virt-2.7``. + Set ``on``/``off``/``auto`` to control ITS instantiation. The default is ``auto``.
Could you fold the docs updates into whichever patches make the corresponding changes to the virt board, please? I think that's patch 3 for the "gicv2m when no ITS available" and I'm not sure which patch the "add auto for the its property" is.
thanks
-- PMM
PATCH v6 23/23 whpx: apic: use non-deprecated APIs to control interrupt controller state
In reply to Mohamed MediouniWHvGetVirtualProcessorInterruptControllerState2 and WHvSetVirtualProcessorInterruptControllerState2 are deprecated since Windows 10 version 2004.
Use the non-deprecated WHvGetVirtualProcessorState and WHvSetVirtualProcessorState when available.
--- include/system/whpx-internal.h | 9 +++++++ target/i386/whpx/whpx-apic.c | 46 +++++++++++++++++++++++++--------- 2 files changed, 43 insertions(+), 12 deletions(-)
include/system/whpx-internal.h +9 -0
@@ -84,6 +84,15 @@ void whpx_apic_get(DeviceState *s);X (HRESULT , WHvSetVirtualProcessorInterruptControllerState2, \ (WHV_PARTITION_HANDLE Partition, UINT32 VpIndex, PVOID State, \ UINT32 StateSize)) \ +X (HRESULT , WHvGetVirtualProcessorState, \ + (WHV_PARTITION_HANDLE Partition, UINT32 VpIndex, \ + WHV_VIRTUAL_PROCESSOR_STATE_TYPE StateType, PVOID Buffer, \ + UINT32 BufferSizeInBytes, UINT32 *BytesWritten)) \ +X (HRESULT , WHvSetVirtualProcessorState, \ + (WHV_PARTITION_HANDLE Partition, UINT32 VpIndex, \ + WHV_VIRTUAL_PROCESSOR_STATE_TYPE StateType, PVOID Buffer, \ + UINT32 BufferSizeInBytes)) \ +#define LIST_WINHVEMULATION_FUNCTIONS (X ) \ X(HRESULT, WHvEmulatorCreateEmulator, (const WHV_EMULATOR_CALLBACKS* Callbacks, WHV_EMULATOR_HANDLE* Emulator)) \
target/i386/whpx/whpx-apic.c +34 -12
61 lines not on this page · raw message
Signature · 1 line
2.50.1 (Apple Git-155)