Skip to contentSkip to conversation

rtc: s35390a: use u8 instead of char for register buffer

PATCH Applied Nick Huang 2 participants 2 messages Sep 20, 2025 – Dec 8, 2025 Real time clock (RTC)

lore
Share & tools
lore

Nick Huang

author
#0 lore raw

PATCH 1/1 rtc: s35390a: use u8 instead of char for register buffer

The register buffer in s35390a_get_reg() was previously defined as char *buf. This is not ideal since register data represents raw binary values rather than textual data.

Switch the type to u8 *buf to better reflect its intended usage and to avoid potential issues with sign extension when handling register values on platforms where char is signed by default.

This change improves type safety and makes the code consistent with other RTC drivers that operate on raw register data.

---
 drivers/rtc/rtc-s35390a.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/rtc/rtc-s35390a.c +9 -9
index 3408d2ab27..07bd983b56 100644
@@ -66,7 +66,7 @@ struct s35390a {
 	int twentyfourhour;
 };
 
-static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
+static int s35390a_set_reg(struct s35390a *s35390a, int reg, u8  *buf, int len)
 {
 	struct i2c_client *client = s35390a->client[reg];
 	struct i2c_msg msg[] = {
@@ -83,7 +83,7 @@ static int s35390a_set_reg(struct s35390a *s35390a, int reg, char *buf, int len)
 	return 0;
 }
 
-static int s35390a_get_reg(struct s35390a *s35390a, int reg, char *buf, int len)
+static int s35390a_get_reg(struct s35390a *s35390a, int reg, u8 *buf, int len)
 {
 	struct i2c_client *client = s35390a->client[reg];
 	struct i2c_msg msg[] = {
@@ -168,7 +168,7 @@ static int s35390a_read_status(struct s35390a *s35390a, char *status1)
 
 static int s35390a_disable_test_mode(struct s35390a *s35390a)
 {
-	char buf[1];
+	u8 buf[1];
 
 	if (s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, buf, sizeof(buf)) < 0)
 		return -EIO;
@@ -210,7 +210,7 @@ static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	struct i2c_client *client = to_i2c_client(dev);
 	struct s35390a	*s35390a = i2c_get_clientdata(client);
 	int i;
-	char buf[7], status;
+	u8 buf[7], status;
 
 	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
 		"mon=%d, year=%d, wday=%d\n", __func__, tm->tm_sec,
@@ -239,7 +239,7 @@ static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct s35390a *s35390a = i2c_get_clientdata(client);
-	char buf[7], status;
+	u8 buf[7], status;
 	int i, err;
 
 	if (s35390a_read_status(s35390a, &status) == 1)
@@ -273,7 +273,7 @@ static int s35390a_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct s35390a *s35390a = i2c_get_clientdata(client);
-	char buf[3], sts = 0;
+	u8 buf[3], sts = 0;
 	int err, i;
 
 	dev_dbg(&client->dev, "%s: alm is secs=%d, mins=%d, hours=%d mday=%d, "\
@@ -326,7 +326,7 @@ static int s35390a_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct s35390a *s35390a = i2c_get_clientdata(client);
-	char buf[3], sts;
+	u8 buf[3], sts;
 	int i, err;
 
 	err = s35390a_get_reg(s35390a, S35390A_CMD_STATUS2, &sts, sizeof(sts));
@@ -383,7 +383,7 @@ static int s35390a_rtc_ioctl(struct device *dev, unsigned int cmd,
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct s35390a *s35390a = i2c_get_clientdata(client);
-	char sts;
+	u8 sts;
 	int err;
 
 	switch (cmd) {
@@ -422,7 +422,7 @@ static int s35390a_probe(struct i2c_client *client)
 	unsigned int i;
 	struct s35390a *s35390a;
 	struct rtc_device *rtc;
-	char buf, status1;
+	u8 buf, status1;
 	struct device *dev = &client->dev;
 
 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
Signature · 1 line
2.48.1
maintainer Applied
#1 lore raw
Quoted 9 lines · Nick Huang

The register buffer in s35390a_get_reg() was previously defined as char *buf. This is not ideal since register data represents raw binary values rather than textual data.

Switch the type to u8 *buf to better reflect its intended usage and to avoid potential issues with sign extension when handling register values on platforms where char is signed by default.

[...]

Applied, thanks!

[1/1] rtc: s35390a: use u8 instead of char for register buffer

      https://git.kernel.org/abelloni/c/73c4638a2864

Best regards,

Signature · 3 lines
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com