6.6.110-rc1 review

This is the start of the stable review cycle for the 6.6.110 release. There are 7 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 05 Oct 2025 16:02:25 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.110-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 6.6.110-rc1

Srinivas Kandagatla <[email protected]>
ASoC: qcom: audioreach: fix potential null pointer dereference

Thadeu Lima de Souza Cascardo <[email protected]>
media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID

Larshin Sergey <[email protected]>
media: rc: fix races with imon_disconnect()

Duoming Zhou <[email protected]>
media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove

Wang Haoran <[email protected]>
scsi: target: target_core_configfs: Add length check to avoid buffer overflow

Kees Cook <[email protected]>
gcc-plugins: Remove TODO_verify_il for GCC >= 16

Breno Leitao <[email protected]>
crypto: sha256 - fix crash at kexec

-------------

Diffstat:

 Makefile                              |  4 +-
 drivers/media/pci/b2c2/flexcop-pci.c  |  2 +-
 drivers/media/rc/imon.c               | 27 +++++++++----
 drivers/media/usb/uvc/uvc_driver.c    | 73 ++++++++++++++++++++++-------------
 drivers/media/usb/uvc/uvcvideo.h      |  2 +
 drivers/target/target_core_configfs.c |  2 +-
 include/crypto/sha256_base.h          |  2 +-
 scripts/gcc-plugins/gcc-common.h      |  7 ++++
 sound/soc/qcom/qdsp6/topology.c       |  4 +-
 9 files changed, 82 insertions(+), 41 deletions(-)

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Breno Leitao <[email protected]>

Loading a large (~2.1G) files with kexec crashes the host with when running:

  # kexec --load kernel --initrd initrd_with_2G_or_more

  UBSAN: signed-integer-overflow in ./include/crypto/sha256_base.h:64:19
  34152083 * 64 cannot be represented in type 'int'
  ...
  BUG: unable to handle page fault for address: ff9fffff83b624c0
  sha256_update (lib/crypto/sha256.c:137)
  crypto_sha256_update (crypto/sha256_generic.c:40)
  kexec_calculate_store_digests (kernel/kexec_file.c:769)
  __se_sys_kexec_file_load (kernel/kexec_file.c:397 kernel/kexec_file.c:332)
  ...

(Line numbers based on commit da274362a7bd9 ("Linux 6.12.49")

This started happening after commit f4da7afe07523f ("kexec_file: increase maximum file size to 4G") that landed in v6.0, which increased the file size for kexec.

This is not happening upstream (v6.16+), given that block type was upgraded from "int" to "size_t" in commit 74a43a2cf5e8 ("crypto:
lib/sha256 - Move partial block handling out")

Upgrade the block type similar to the commit above, avoiding hitting the overflow.

This patch is only suitable for the stable tree, and before 6.16, which got commit 74a43a2cf5e8 ("crypto: lib/sha256 - Move partial block handling out"). This is not required before f4da7afe07523f ("kexec_file:
increase maximum file size to 4G"). In other words, this fix is required between versions v6.0 and v6.16.

---
 include/crypto/sha256_base.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -44,7 +44,7 @@ static inline int lib_sha256_base_do_upd
 	sctx->count += len;
 
 	if (unlikely((partial + len) >= SHA256_BLOCK_SIZE)) {
-		int blocks;
+		unsigned int blocks;
 
 		if (partial) {
 			int p = SHA256_BLOCK_SIZE - partial;

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Kees Cook <[email protected]>

commit a40282dd3c484e6c882e93f4680e0a3ef3814453 upstream.

GCC now runs TODO_verify_il automatically[1], so it is no longer exposed to plugins. Only use the flag on GCC < 16.

---
 scripts/gcc-plugins/gcc-common.h |    7 +++++++
 1 file changed, 7 insertions(+)

@@ -196,10 +196,17 @@ inline bool is_a_helper<const gassign *>
 }
 #endif
 
+#if BUILDING_GCC_VERSION < 16000
 #define TODO_verify_ssa TODO_verify_il
 #define TODO_verify_flow TODO_verify_il
 #define TODO_verify_stmts TODO_verify_il
 #define TODO_verify_rtl_sharing TODO_verify_il
+#else
+#define TODO_verify_ssa 0
+#define TODO_verify_flow 0
+#define TODO_verify_stmts 0
+#define TODO_verify_rtl_sharing 0
+#endif
 
 #define INSN_DELETED_P(insn) (insn)->deleted()
 

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Wang Haoran <[email protected]>

commit 27e06650a5eafe832a90fd2604f0c5e920857fae upstream.

A buffer overflow arises from the usage of snprintf to write into the buffer "buf" in target_lu_gp_members_show function located in /drivers/target/target_core_configfs.c. This buffer is allocated with size LU_GROUP_NAME_BUF (256 bytes).

snprintf(...) formats multiple strings into buf with the HBA name (hba->hba_group.cg_item), a slash character, a devicename (dev-> dev_group.cg_item) and a newline character, the total formatted string length may exceed the buffer size of 256 bytes.

Since snprintf() returns the total number of bytes that would have been written (the length of %s/%sn ), this value may exceed the buffer length (256 bytes) passed to memcpy(), this will ultimately cause function memcpy reporting a buffer overflow error.

An additional check of the return value of snprintf() can avoid this buffer overflow.

---
 drivers/target/target_core_configfs.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -2738,7 +2738,7 @@ static ssize_t target_lu_gp_members_show
 			config_item_name(&dev->dev_group.cg_item));
 		cur_len++; /* Extra byte for NULL terminator */
 
-		if ((cur_len + len) > PAGE_SIZE) {
+		if ((cur_len + len) > PAGE_SIZE || cur_len > LU_GROUP_NAME_BUF) {
 			pr_warn("Ran out of lu_gp_show_attr"
 				"_members buffer\n");
 			break;

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Duoming Zhou <[email protected]>

commit 01e03fb7db419d39e18d6090d4873c1bff103914 upstream.

The original code uses cancel_delayed_work() in flexcop_pci_remove(), which does not guarantee that the delayed work item irq_check_work has fully completed if it was already running. This leads to use-after-free scenarios where flexcop_pci_remove() may free the flexcop_device while irq_check_work is still active and attempts to dereference the device.

A typical race condition is illustrated below:

CPU 0 (remove)                         | CPU 1 (delayed work callback)
flexcop_pci_remove()                   | flexcop_pci_irq_check_work()
  cancel_delayed_work()                |
  flexcop_device_kfree(fc_pci->fc_dev) |
                                       |   fc = fc_pci->fc_dev; // UAF

This is confirmed by a KASAN report:

==================================================================

BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff8880093aa8c8 by task bash/135
...
Call Trace:
 <IRQ>
 dump_stack_lvl+0x55/0x70
 print_report+0xcf/0x610
 ? __run_timer_base.part.0+0x7d7/0x8c0
 kasan_report+0xb8/0xf0
 ? __run_timer_base.part.0+0x7d7/0x8c0
 __run_timer_base.part.0+0x7d7/0x8c0
 ? __pfx___run_timer_base.part.0+0x10/0x10
 ? __pfx_read_tsc+0x10/0x10
 ? ktime_get+0x60/0x140
 ? lapic_next_event+0x11/0x20
 ? clockevents_program_event+0x1d4/0x2a0
 run_timer_softirq+0xd1/0x190
 handle_softirqs+0x16a/0x550
 irq_exit_rcu+0xaf/0xe0
 sysvec_apic_timer_interrupt+0x70/0x80
 </IRQ>

...

Allocated by task 1:
 kasan_save_stack+0x24/0x50
 kasan_save_track+0x14/0x30
 __kasan_kmalloc+0x7f/0x90
 __kmalloc_noprof+0x1be/0x460
 flexcop_device_kmalloc+0x54/0xe0
 flexcop_pci_probe+0x1f/0x9d0
 local_pci_probe+0xdc/0x190
 pci_device_probe+0x2fe/0x470
 really_probe+0x1ca/0x5c0
 __driver_probe_device+0x248/0x310
 driver_probe_device+0x44/0x120
 __driver_attach+0xd2/0x310
 bus_for_each_dev+0xed/0x170
 bus_add_driver+0x208/0x500
 driver_register+0x132/0x460
 do_one_initcall+0x89/0x300
 kernel_init_freeable+0x40d/0x720
 kernel_init+0x1a/0x150
 ret_from_fork+0x10c/0x1a0
 ret_from_fork_asm+0x1a/0x30

Freed by task 135:
 kasan_save_stack+0x24/0x50
 kasan_save_track+0x14/0x30
 kasan_save_free_info+0x3a/0x60
 __kasan_slab_free+0x3f/0x50
 kfree+0x137/0x370
 flexcop_device_kfree+0x32/0x50
 pci_device_remove+0xa6/0x1d0
 device_release_driver_internal+0xf8/0x210
 pci_stop_bus_device+0x105/0x150
 pci_stop_and_remove_bus_device_locked+0x15/0x30
 remove_store+0xcc/0xe0
 kernfs_fop_write_iter+0x2c3/0x440
 vfs_write+0x871/0xd70
 ksys_write+0xee/0x1c0
 do_syscall_64+0xac/0x280
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

...

Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the delayed work item is properly canceled and any executing delayed work has finished before the device memory is deallocated.

This bug was initially identified through static analysis. To reproduce and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced artificial delays within the flexcop_pci_irq_check_work() function to increase the likelihood of triggering the bug.

---
 drivers/media/pci/b2c2/flexcop-pci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -411,7 +411,7 @@ static void flexcop_pci_remove(struct pc
 	struct flexcop_pci *fc_pci = pci_get_drvdata(pdev);
 
 	if (irq_chk_intv > 0)
-		cancel_delayed_work(&fc_pci->irq_check_work);
+		cancel_delayed_work_sync(&fc_pci->irq_check_work);
 
 	flexcop_pci_dma_exit(fc_pci);
 	flexcop_device_exit(fc_pci->fc_dev);

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Larshin Sergey <[email protected]>

commit fa0f61cc1d828178aa921475a9b786e7fbb65ccb upstream.

Syzbot reports a KASAN issue as below:

BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline]
BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465

CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
 <TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__create_pipe include/linux/usb.h:1945 [inline]
send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991
vfs_write+0x2d7/0xdd0 fs/read_write.c:576
ksys_write+0x127/0x250 fs/read_write.c:631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The iMON driver improperly releases the usb_device reference in imon_disconnect without coordinating with active users of the device.

Specifically, the fields usbdev_intf0 and usbdev_intf1 are not protected by the users counter (ictx->users). During probe, imon_init_intf0 or imon_init_intf1 increments the usb_device reference count depending on the interface. However, during disconnect, usb_put_dev is called unconditionally, regardless of actual usage.

As a result, if vfd_write or other operations are still in progress after disconnect, this can lead to a use-after-free of the usb_device pointer.

Thread 1 vfd_write Thread 2 imon_disconnect

                                        ...
                                        if
                                          usb_put_dev(ictx->usbdev_intf0)
                                        else
                                          usb_put_dev(ictx->usbdev_intf1)
...
while
  send_packet
    if
      pipe = usb_sndintpipe(
        ictx->usbdev_intf0) UAF
    else
      pipe = usb_sndctrlpipe(
        ictx->usbdev_intf0, 0) UAF

Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by checking ictx->disconnected in all writer paths. Add early return with -ENODEV in send_packet(), vfd_write(), lcd_write() and display_open() if the device is no longer present.

Set and read ictx->disconnected under ictx->lock to ensure memory synchronization. Acquire the lock in imon_disconnect() before setting the flag to synchronize with any ongoing operations.

Ensure writers exit early and safely after disconnect before the USB core proceeds with cleanup.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

---
 drivers/media/rc/imon.c |   27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

@@ -536,7 +536,9 @@ static int display_open(struct inode *in
 
 	mutex_lock(&ictx->lock);
 
-	if (!ictx->display_supported) {
+	if (ictx->disconnected) {
+		retval = -ENODEV;
+	} else if (!ictx->display_supported) {
 		pr_err("display not supported by device\n");
 		retval = -ENODEV;
 	} else if (ictx->display_isopen) {

@@ -598,6 +600,9 @@ static int send_packet(struct imon_conte
 	int retval = 0;
 	struct usb_ctrlrequest *control_req = NULL;
 
+	if (ictx->disconnected)
+		return -ENODEV;
+
 	/* Check if we need to use control or interrupt urb */
 	if (!ictx->tx_control) {
 		pipe = usb_sndintpipe(ictx->usbdev_intf0,

@@ -949,12 +954,14 @@ static ssize_t vfd_write(struct file *fi
 	static const unsigned char vfd_packet6[] = {
 		0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF };
 
-	if (ictx->disconnected)
-		return -ENODEV;
-
 	if (mutex_lock_interruptible(&ictx->lock))
 		return -ERESTARTSYS;
 
+	if (ictx->disconnected) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
 	if (!ictx->dev_present_intf0) {
 		pr_err_ratelimited("no iMON device present\n");
 		retval = -ENODEV;

@@ -1029,11 +1036,13 @@ static ssize_t lcd_write(struct file *fi
 	int retval = 0;
 	struct imon_context *ictx = file->private_data;
 
-	if (ictx->disconnected)
-		return -ENODEV;
-
 	mutex_lock(&ictx->lock);
 
+	if (ictx->disconnected) {
+		retval = -ENODEV;
+		goto exit;
+	}
+
 	if (!ictx->display_supported) {
 		pr_err_ratelimited("no iMON display present\n");
 		retval = -ENODEV;

@@ -2499,7 +2508,11 @@ static void imon_disconnect(struct usb_i
 	int ifnum;
 
 	ictx = usb_get_intfdata(interface);
+
+	mutex_lock(&ictx->lock);
 	ictx->disconnected = true;
+	mutex_unlock(&ictx->lock);
+
 	dev = ictx->dev;
 	ifnum = interface->cur_altsetting->desc.bInterfaceNumber;
 

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Thadeu Lima de Souza Cascardo <[email protected]>

commit 0e2ee70291e64a30fe36960c85294726d34a103e upstream.

Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero unique ID.

```
Each Unit and Terminal within the video function is assigned a unique
identification number, the Unit ID (UID) or Terminal ID (TID), contained in
the bUnitID or bTerminalID field of the descriptor. The value 0x00 is
reserved for undefined ID,
```

If we add a new entity with id 0 or a duplicated ID, it will be marked as UVC_INVALID_ENTITY_ID.

In a previous attempt commit 3dd075fe8ebb ("media: uvcvideo: Require entities to have a non-zero unique ID"), we ignored all the invalid units, this broke a lot of non-compatible cameras. Hopefully we are more lucky this time.

This also prevents some syzkaller reproducers from triggering warnings due to a chain of entities referring to themselves. In one particular case, an Output Unit is connected to an Input Unit, both with the same ID of 1. But when looking up for the source ID of the Output Unit, that same entity is found instead of the input entity, which leads to such warnings.

In another case, a backward chain was considered finished as the source ID was 0. Later on, that entity was found, but its pads were not valid.

Here is a sample stack trace for one of those cases.

[   20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   20.830206] usb 1-1: Using ep0 maxpacket: 8
[   20.833501] usb 1-1: config 0 descriptor??
[   21.038518] usb 1-1: string descriptor 0 read error: -71
[   21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201)
[   21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized!
[   21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized!
[   21.042218] ------------[ cut here ]------------
[   21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0
[   21.043195] Modules linked in:
[   21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444
[   21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[   21.044639] Workqueue: usb_hub_wq hub_event
[   21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0
[   21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00
[   21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246
[   21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1
[   21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290
[   21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000
[   21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003
[   21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000
[   21.049648] FS:  0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[   21.050271] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0
[   21.051136] PKRU: 55555554
[   21.051331] Call Trace:
[   21.051480]  <TASK>
[   21.051611]  ? __warn+0xc4/0x210
[   21.051861]  ? media_create_pad_link+0x2c4/0x2e0
[   21.052252]  ? report_bug+0x11b/0x1a0
[   21.052540]  ? trace_hardirqs_on+0x31/0x40
[   21.052901]  ? handle_bug+0x3d/0x70
[   21.053197]  ? exc_invalid_op+0x1a/0x50
[   21.053511]  ? asm_exc_invalid_op+0x1a/0x20
[   21.053924]  ? media_create_pad_link+0x91/0x2e0
[   21.054364]  ? media_create_pad_link+0x2c4/0x2e0
[   21.054834]  ? media_create_pad_link+0x91/0x2e0
[   21.055131]  ? _raw_spin_unlock+0x1e/0x40
[   21.055441]  ? __v4l2_device_register_subdev+0x202/0x210
[   21.055837]  uvc_mc_register_entities+0x358/0x400
[   21.056144]  uvc_register_chains+0x1fd/0x290
[   21.056413]  uvc_probe+0x380e/0x3dc0
[   21.056676]  ? __lock_acquire+0x5aa/0x26e0
[   21.056946]  ? find_held_lock+0x33/0xa0
[   21.057196]  ? kernfs_activate+0x70/0x80
[   21.057533]  ? usb_match_dynamic_id+0x1b/0x70
[   21.057811]  ? find_held_lock+0x33/0xa0
[   21.058047]  ? usb_match_dynamic_id+0x55/0x70
[   21.058330]  ? lock_release+0x124/0x260
[   21.058657]  ? usb_match_one_id_intf+0xa2/0x100
[   21.058997]  usb_probe_interface+0x1ba/0x330
[   21.059399]  really_probe+0x1ba/0x4c0
[   21.059662]  __driver_probe_device+0xb2/0x180
[   21.059944]  driver_probe_device+0x5a/0x100
[   21.060170]  __device_attach_driver+0xe9/0x160
[   21.060427]  ? __pfx___device_attach_driver+0x10/0x10
[   21.060872]  bus_for_each_drv+0xa9/0x100
[   21.061312]  __device_attach+0xed/0x190
[   21.061812]  device_initial_probe+0xe/0x20
[   21.062229]  bus_probe_device+0x4d/0xd0
[   21.062590]  device_add+0x308/0x590
[   21.062912]  usb_set_configuration+0x7b6/0xaf0
[   21.063403]  usb_generic_driver_probe+0x36/0x80
[   21.063714]  usb_probe_device+0x7b/0x130
[   21.063936]  really_probe+0x1ba/0x4c0
[   21.064111]  __driver_probe_device+0xb2/0x180
[   21.064577]  driver_probe_device+0x5a/0x100
[   21.065019]  __device_attach_driver+0xe9/0x160
[   21.065403]  ? __pfx___device_attach_driver+0x10/0x10
[   21.065820]  bus_for_each_drv+0xa9/0x100
[   21.066094]  __device_attach+0xed/0x190
[   21.066535]  device_initial_probe+0xe/0x20
[   21.066992]  bus_probe_device+0x4d/0xd0
[   21.067250]  device_add+0x308/0x590
[   21.067501]  usb_new_device+0x347/0x610
[   21.067817]  hub_event+0x156b/0x1e30
[   21.068060]  ? process_scheduled_works+0x48b/0xaf0
[   21.068337]  process_scheduled_works+0x5a3/0xaf0
[   21.068668]  worker_thread+0x3cf/0x560
[   21.068932]  ? kthread+0x109/0x1b0
[   21.069133]  kthread+0x197/0x1b0
[   21.069343]  ? __pfx_worker_thread+0x10/0x10
[   21.069598]  ? __pfx_kthread+0x10/0x10
[   21.069908]  ret_from_fork+0x32/0x40
[   21.070169]  ? __pfx_kthread+0x10/0x10
[   21.070424]  ret_from_fork_asm+0x1a/0x30
[   21.070737]  </TASK>

---
 drivers/media/usb/uvc/uvc_driver.c |   73 +++++++++++++++++++++++--------------
 drivers/media/usb/uvc/uvcvideo.h   |    2 +
 2 files changed, 48 insertions(+), 27 deletions(-)

@@ -135,6 +135,9 @@ struct uvc_entity *uvc_entity_by_id(stru
 {
 	struct uvc_entity *entity;
 
+	if (id == UVC_INVALID_ENTITY_ID)
+		return NULL;
+
 	list_for_each_entry(entity, &dev->entities, list) {
 		if (entity->id == id)
 			return entity;

@@ -778,14 +781,27 @@ static const u8 uvc_media_transport_inpu
 	UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT;
 static const u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING;
 
-static struct uvc_entity *uvc_alloc_entity(u16 type, u16 id,
-		unsigned int num_pads, unsigned int extra_size)
+static struct uvc_entity *uvc_alloc_new_entity(struct uvc_device *dev, u16 type,
+					       u16 id, unsigned int num_pads,
+					       unsigned int extra_size)
 {
 	struct uvc_entity *entity;
 	unsigned int num_inputs;
 	unsigned int size;
 	unsigned int i;
 
+	/* Per UVC 1.1+ spec 3.7.2, the ID should be non-zero. */
+	if (id == 0) {
+		dev_err(&dev->intf->dev, "Found Unit with invalid ID 0\n");
+		id = UVC_INVALID_ENTITY_ID;
+	}
+
+	/* Per UVC 1.1+ spec 3.7.2, the ID is unique. */
+	if (uvc_entity_by_id(dev, id)) {
+		dev_err(&dev->intf->dev, "Found multiple Units with ID %u\n", id);
+		id = UVC_INVALID_ENTITY_ID;
+	}
+
 	extra_size = roundup(extra_size, sizeof(*entity->pads));
 	if (num_pads)
 		num_inputs = type & UVC_TERM_OUTPUT ? num_pads : num_pads - 1;

@@ -795,7 +811,7 @@ static struct uvc_entity *uvc_alloc_enti
 	     + num_inputs;
 	entity = kzalloc(size, GFP_KERNEL);
 	if (entity == NULL)
-		return NULL;
+		return ERR_PTR(-ENOMEM);
 
 	entity->id = id;
 	entity->type = type;

@@ -907,10 +923,10 @@ static int uvc_parse_vendor_control(stru
 			break;
 		}
 
-		unit = uvc_alloc_entity(UVC_VC_EXTENSION_UNIT, buffer[3],
-					p + 1, 2*n);
-		if (unit == NULL)
-			return -ENOMEM;
+		unit = uvc_alloc_new_entity(dev, UVC_VC_EXTENSION_UNIT,
+					    buffer[3], p + 1, 2 * n);
+		if (IS_ERR(unit))
+			return PTR_ERR(unit);
 
 		memcpy(unit->guid, &buffer[4], 16);
 		unit->extension.bNumControls = buffer[20];

@@ -1019,10 +1035,10 @@ static int uvc_parse_standard_control(st
 			return -EINVAL;
 		}
 
-		term = uvc_alloc_entity(type | UVC_TERM_INPUT, buffer[3],
-					1, n + p);
-		if (term == NULL)
-			return -ENOMEM;
+		term = uvc_alloc_new_entity(dev, type | UVC_TERM_INPUT,
+					    buffer[3], 1, n + p);
+		if (IS_ERR(term))
+			return PTR_ERR(term);
 
 		if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) {
 			term->camera.bControlSize = n;

@@ -1078,10 +1094,10 @@ static int uvc_parse_standard_control(st
 			return 0;
 		}
 
-		term = uvc_alloc_entity(type | UVC_TERM_OUTPUT, buffer[3],
-					1, 0);
-		if (term == NULL)
-			return -ENOMEM;
+		term = uvc_alloc_new_entity(dev, type | UVC_TERM_OUTPUT,
+					    buffer[3], 1, 0);
+		if (IS_ERR(term))
+			return PTR_ERR(term);
 
 		memcpy(term->baSourceID, &buffer[7], 1);
 

@@ -1100,9 +1116,10 @@ static int uvc_parse_standard_control(st
 			return -EINVAL;
 		}
 
-		unit = uvc_alloc_entity(buffer[2], buffer[3], p + 1, 0);
-		if (unit == NULL)
-			return -ENOMEM;
+		unit = uvc_alloc_new_entity(dev, buffer[2], buffer[3],
+					    p + 1, 0);
+		if (IS_ERR(unit))
+			return PTR_ERR(unit);
 
 		memcpy(unit->baSourceID, &buffer[5], p);
 

@@ -1122,9 +1139,9 @@ static int uvc_parse_standard_control(st
 			return -EINVAL;
 		}
 
-		unit = uvc_alloc_entity(buffer[2], buffer[3], 2, n);
-		if (unit == NULL)
-			return -ENOMEM;
+		unit = uvc_alloc_new_entity(dev, buffer[2], buffer[3], 2, n);
+		if (IS_ERR(unit))
+			return PTR_ERR(unit);
 
 		memcpy(unit->baSourceID, &buffer[4], 1);
 		unit->processing.wMaxMultiplier =

@@ -1151,9 +1168,10 @@ static int uvc_parse_standard_control(st
 			return -EINVAL;
 		}
 
-		unit = uvc_alloc_entity(buffer[2], buffer[3], p + 1, n);
-		if (unit == NULL)
-			return -ENOMEM;
+		unit = uvc_alloc_new_entity(dev, buffer[2], buffer[3],
+					    p + 1, n);
+		if (IS_ERR(unit))
+			return PTR_ERR(unit);
 
 		memcpy(unit->guid, &buffer[4], 16);
 		unit->extension.bNumControls = buffer[20];

@@ -1293,9 +1311,10 @@ static int uvc_gpio_parse(struct uvc_dev
 		return dev_err_probe(&dev->intf->dev, irq,
 				     "No IRQ for privacy GPIO\n");
 
-	unit = uvc_alloc_entity(UVC_EXT_GPIO_UNIT, UVC_EXT_GPIO_UNIT_ID, 0, 1);
-	if (!unit)
-		return -ENOMEM;
+	unit = uvc_alloc_new_entity(dev, UVC_EXT_GPIO_UNIT,
+				    UVC_EXT_GPIO_UNIT_ID, 0, 1);
+	if (IS_ERR(unit))
+		return PTR_ERR(unit);
 
 	unit->gpio.gpio_privacy = gpio_privacy;
 	unit->gpio.irq = irq;

@@ -41,6 +41,8 @@
 #define UVC_EXT_GPIO_UNIT		0x7ffe
 #define UVC_EXT_GPIO_UNIT_ID		0x100
 
+#define UVC_INVALID_ENTITY_ID          0xffff
+
 /* ------------------------------------------------------------------------
  * Driver specific constants.
  */

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Srinivas Kandagatla <[email protected]>

commit 8318e04ab2526b155773313b66a1542476ce1106 upstream.

It is possible that the topology parsing function audioreach_widget_load_module_common() could return NULL or an error pointer. Add missing NULL check so that we do not dereference it.

---
 sound/soc/qcom/qdsp6/topology.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -586,8 +586,8 @@ static int audioreach_widget_load_module
 		return PTR_ERR(cont);
 
 	mod = audioreach_parse_common_tokens(apm, cont, &tplg_w->priv, w);
-	if (IS_ERR(mod))
-		return PTR_ERR(mod);
+	if (IS_ERR_OR_NULL(mod))
+		return mod ? PTR_ERR(mod) : -ENODEV;
 
 	dobj = &w->dobj;
 	dobj->private = mod;

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels, build tested on BMIPS_GENERIC:

Florian

# Librecast Test Results

010/010 [ OK ] libmld
120/120 [ OK ] liblibrecast

CPU/kernel: Linux auntie 6.6.110-rc1-gc901132c8088 #101 SMP PREEMPT_DYNAMIC Sat Oct 4 11:33:00 -00 2025 x86_64 AMD Ryzen 9 9950X 16-Core Processor AuthenticAMD GNU/Linux

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 6.6.110-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: c901132c8088afd41cf7eaa3298b62c8cc5874b6
* git describe: v6.6.109-8-gc901132c8088
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.109-8-gc901132c8088

## Test Regressions (compared to v6.6.108-92-g583cf4b0ea80)

## Metric Regressions (compared to v6.6.108-92-g583cf4b0ea80)

## Test Fixes (compared to v6.6.108-92-g583cf4b0ea80)

## Metric Fixes (compared to v6.6.108-92-g583cf4b0ea80)

## Test result summary
total: 121371, pass: 103471, fail: 4150, skip: 13306, xfail: 444

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 129 total, 128 passed, 1 failed
* arm64: 44 total, 40 passed, 4 failed
* i386: 23 total, 23 passed, 0 failed
* mips: 26 total, 25 passed, 1 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 32 total, 31 passed, 1 failed
* riscv: 15 total, 14 passed, 1 failed
* s390: 14 total, 13 passed, 1 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 7 total, 7 passed, 0 failed
* x86_64: 37 total, 34 passed, 3 failed

## Test suites summary
* boot
* commands
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mm
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* lava
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

All tests passing for Tegra ...

Test results for stable-v6.6:

    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    120 tests:	120 pass, 0 fail

Linux version: 6.6.110-rc1-gc901132c8088
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000,
                tegra194-p3509-0000+p3668-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Jon

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Am 03.10.2025 um 18:06 schrieb Greg Kroah-Hartman:

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.

Beste Grüße,
Peter Schneider

Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&[email protected]
https://keys.mailvelope.com/pks/lookup?op=get&[email protected]

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).