Skip to contentSkip to conversation

iio: imu: st_lsm6dsx: Decouple sensor ODR from FIFO batch data rate

PATCH Superseded Francesco Lavra 2 participants 6 messages Oct 16, 2025 – Oct 17, 2025

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

v2 cover iio: imu: st_lsm6dsx: Decouple sensor ODR from FIFO batch data rate

The rate at which accelerometer or gyroscope sensor samples are fed to the hardware FIFO (batch data rate, or BDR) does not have to coincide with the sensor sampling frequency (output data rate, or ODR); the only requirement is for the BDR to not be greater than the ODR. Having a BDR lower than the ODR is useful in cases where an application requires a high sampling rate for accurate detection of motion events (e.g. wakeup events), but wants to read sensor sample values from the device buffer at a lower data rate (e.g. to minimize the amount of I2C or SPI traffic and the rate of periodic interrupts).
This change set amends the st_lsm6dsx IIO driver to support the above use case. The first commit is a trivial fix to the source code comment that indicates what measurement unit is used for the odr field of struct st_lsm6ds_sensor, while the second commit introduces a new hwfifo_odr_mHz field in the same struct to implement the new functionality.

Changes in v2:
- added Fixes: tag to patch 1/2 (Lorenzo)
- in sysfs store handler, moved iio_device_claim_direct() call to beginning of function (Lorenzo)
- changed new struct st_lsm6dsx_sensor field name from bdr to hwfifo_odr_mHz (Lorenzo, David)
- replaced min_t() and max_t() calls with min() and max() (Andy)
- added setting of buffer frequency equal to main frequency whenever the latter is updated via sysfs (Jonathan)
- miscellaneous stylistic modifications (Lorenzo, Andy, Jonathan)

v1: [1]

[1] https://lore.kernel.org/linux-iio/[email protected]/T/#u

Francesco Lavra (2):
iio: imu: st_lsm6dsx: Fix measurement unit for odr struct member
iio: imu: st_lsm6dsx: Decouple sensor ODR from FIFO batch data rate

 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       |  4 +-
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 71 ++++++++++++++++---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  |  3 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c  |  3 +-
 4 files changed, 70 insertions(+), 11 deletions(-)
Signature · 1 line
2.39.5
#1 lore raw

PATCH v2 1/2 iio: imu: st_lsm6dsx: Fix measurement unit for odr struct member

The odr field in struct st_lsm6dsx_sensor contains a data rate value expressed in mHz, not in Hz.

Fixes 290a6ce11d938 ("iio: imu: add support to lsm6dsx driver")
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +1 -1
index c225b246c8a5..bd366c6e282a 100644
@@ -365,7 +365,7 @@ enum st_lsm6dsx_fifo_mode {
  * @id: Sensor identifier.
  * @hw: Pointer to instance of struct st_lsm6dsx_hw.
  * @gain: Configured sensor sensitivity.
- * @odr: Output data rate of the sensor [Hz].
+ * @odr: Output data rate of the sensor [mHz].
  * @samples_to_discard: Number of samples to discard for filters settling time.
  * @watermark: Sensor watermark level.
  * @decimator: Sensor decimation factor.
Signature · 1 line
2.39.5
maintainer Acked-by on v2 1/2
#2 lore raw

Re: [PATCH 1/2] iio: imu: st_lsm6dsx: Fix measurement unit for odr struct member

Quoted 5 lines

The odr field in struct st_lsm6dsx_sensor contains a data rate value expressed in mHz, not in Hz.

Fixes 290a6ce11d938 ("iio: imu: add support to lsm6dsx driver")
Quoted 20 lines
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +1 -1
index c225b246c8a5..bd366c6e282a 100644
@@ -365,7 +365,7 @@ enum st_lsm6dsx_fifo_mode {
  * @id: Sensor identifier.
  * @hw: Pointer to instance of struct st_lsm6dsx_hw.
  * @gain: Configured sensor sensitivity.
- * @odr: Output data rate of the sensor [Hz].
+ * @odr: Output data rate of the sensor [mHz].
  * @samples_to_discard: Number of samples to discard for filters settling time.
  * @watermark: Sensor watermark level.
  * @decimator: Sensor decimation factor.
Signature · 1 line
2.39.5
#3 lore raw

Re: [PATCH 1/2] iio: imu: st_lsm6dsx: Fix measurement unit for odr struct member

Quoted 4 lines · Lorenzo Bianconi
Quoted 4 lines

The odr field in struct st_lsm6dsx_sensor contains a data rate value expressed in mHz, not in Hz.

Fixes 290a6ce11d938 ("iio: imu: add support to lsm6dsx driver")

I just learned that odr values used to be expressed in Hz in past versions of the driver, so the right commit for the Fixes: tag is f8710f0357bc3 ("iio: imu: st_lsm6dsx: express odr in mHZ"). Will correct this in v3.

Quoted 3 lines
Quoted 1 line
#4 lore raw

PATCH v2 2/2 iio: imu: st_lsm6dsx: Decouple sensor ODR from FIFO batch data rate

In reply to Francesco Lavra

The rate at which accelerometer or gyroscope sensor samples are fed to the hardware FIFO (batch data rate, or BDR) does not have to coincide with the sensor sampling frequency (output data rate, or ODR); the only requirement is for the BDR to not be greater than the ODR. Having a BDR lower than the ODR is useful in cases where an application requires a high sampling rate for accurate detection of motion events (e.g. wakeup events), but wants to read sensor sample values from the hardware FIFO at a lower data rate (e.g. to minimize the amount of I2C or SPI traffic and the rate of periodic interrupts).
To support the above use case, add a sampling_frequency sysfs attribute to the buffer directory of st_lsm6dsx IIO devices, which controls the BDR for a given sensor independently from the "main" sampling_frequency attribute (which controls the ODR); introduce a new hwfifo_odr_mHz field in struct st_lsm6dsx_sensor to keep track of the current BDR value, and use this field instead of the odr field in the code that deals with the FIFO data rate. In the sensor hub driver, make the hwfifo_odr_mHz value always mirror the odr value, since there is no separate configuration setting to control the BDR for data produced by the sensor hub functionality. For backwards compatibility, set the buffer frequency equal to the main frequency whenever the latter is updated via sysfs; if userspace wants a different buffer frequency, it has to write to the relevant sysfs attribute after any writes to the main frequency attribute.

---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       |  2 +
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 71 ++++++++++++++++---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  |  3 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c  |  3 +-
 4 files changed, 69 insertions(+), 10 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +2 -0
index bd366c6e282a..3cd520bdec46 100644
@@ -366,6 +366,7 @@ enum st_lsm6dsx_fifo_mode {
  * @hw: Pointer to instance of struct st_lsm6dsx_hw.
  * @gain: Configured sensor sensitivity.
  * @odr: Output data rate of the sensor [mHz].
+ * hwfifo_odr_mHz: Batch data rate for hardware FIFO [mHz]
  * @samples_to_discard: Number of samples to discard for filters settling time.
  * @watermark: Sensor watermark level.
  * @decimator: Sensor decimation factor.
@@ -380,6 +381,7 @@ struct st_lsm6dsx_sensor {
 
 	u32 gain;
 	u32 odr;
+	u32 hwfifo_odr_mHz;
 
 	u16 samples_to_discard;
 	u16 watermark;
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +63 -8

118 lines not on this page · raw message

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +2 -1
index c65ad49829e7..055424303a4f 100644
@@ -1850,7 +1850,7 @@ static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev,
 		if (val < 0)
 			err = val;
 		else
-			sensor->odr = val;
+			sensor->odr = sensor->hwfifo_odr_mHz = val;
 		break;
 	}
 	default:
@@ -2384,6 +2384,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	sensor->id = id;
 	sensor->hw = hw;
 	sensor->odr = hw->settings->odr_table[id].odr_avl[0].milli_hz;
+	sensor->hwfifo_odr_mHz = sensor->odr;
 	sensor->gain = hw->settings->fs_table[id].fs_avl[0].gain;
 	sensor->watermark = 1;
 
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +2 -1
index 3c5e65dc0f97..039f588ef806 100644
@@ -639,7 +639,7 @@ __st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
 			return odr;
 
 		sensor->ext_info.slv_odr = val;
-		sensor->odr = odr;
+		sensor->odr = sensor->hwfifo_odr_mHz = odr;
 		return 0;
 	}
 	case IIO_CHAN_INFO_SCALE:
@@ -746,6 +746,7 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	sensor->id = id;
 	sensor->hw = hw;
 	sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
+	sensor->hwfifo_odr_mHz = sensor->odr;
 	sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
 	sensor->gain = info->fs_table.fs_avl[0].gain;
 	sensor->ext_info.settings = info;
Signature · 1 line
2.39.5
maintainer Acked-by on v2 2/2
#5 lore raw
Quoted 26 lines

The rate at which accelerometer or gyroscope sensor samples are fed to the hardware FIFO (batch data rate, or BDR) does not have to coincide with the sensor sampling frequency (output data rate, or ODR); the only requirement is for the BDR to not be greater than the ODR. Having a BDR lower than the ODR is useful in cases where an application requires a high sampling rate for accurate detection of motion events (e.g. wakeup events), but wants to read sensor sample values from the hardware FIFO at a lower data rate (e.g. to minimize the amount of I2C or SPI traffic and the rate of periodic interrupts).
To support the above use case, add a sampling_frequency sysfs attribute to the buffer directory of st_lsm6dsx IIO devices, which controls the BDR for a given sensor independently from the "main" sampling_frequency attribute (which controls the ODR); introduce a new hwfifo_odr_mHz field in struct st_lsm6dsx_sensor to keep track of the current BDR value, and use this field instead of the odr field in the code that deals with the FIFO data rate. In the sensor hub driver, make the hwfifo_odr_mHz value always mirror the odr value, since there is no separate configuration setting to control the BDR for data produced by the sensor hub functionality. For backwards compatibility, set the buffer frequency equal to the main frequency whenever the latter is updated via sysfs; if userspace wants a different buffer frequency, it has to write to the relevant sysfs attribute after any writes to the main frequency attribute.

Quoted 1 line

Hi Francesco,

I think the patch is fine, just few nits inline. Addressing them:

Quoted 85 lines
---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h       |  2 +
 .../iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c    | 71 ++++++++++++++++---
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c  |  3 +-
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c  |  3 +-
 4 files changed, 69 insertions(+), 10 deletions(-)
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h +2 -0
index bd366c6e282a..3cd520bdec46 100644
@@ -366,6 +366,7 @@ enum st_lsm6dsx_fifo_mode {
  * @hw: Pointer to instance of struct st_lsm6dsx_hw.
  * @gain: Configured sensor sensitivity.
  * @odr: Output data rate of the sensor [mHz].
+ * hwfifo_odr_mHz: Batch data rate for hardware FIFO [mHz]
  * @samples_to_discard: Number of samples to discard for filters settling time.
  * @watermark: Sensor watermark level.
  * @decimator: Sensor decimation factor.
@@ -380,6 +381,7 @@ struct st_lsm6dsx_sensor {
 
 	u32 gain;
 	u32 odr;
+	u32 hwfifo_odr_mHz;
 
 	u16 samples_to_discard;
 	u16 watermark;
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +7 -6
index 8a9d2593576a..7a66f06522c4 100644
@@ -56,6 +56,7 @@
 #include <linux/iio/kfifo_buf.h>
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
 #include <linux/regmap.h>
 #include <linux/bitfield.h>
 
@@ -105,7 +106,7 @@ static int
 st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
 {
 	const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
-	u32 decimator =  max_odr / sensor->odr;
+	u32 decimator = max_odr / sensor->hwfifo_odr_mHz;
 	int i;
 
 	if (decimator > 1)
@@ -136,14 +137,14 @@ static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
 		if (!(hw->enable_mask & BIT(sensor->id)))
 			continue;
 
-		*max_odr = max_t(u32, *max_odr, sensor->odr);
-		*min_odr = min_t(u32, *min_odr, sensor->odr);
+		*max_odr = max(*max_odr, sensor->hwfifo_odr_mHz);
+		*min_odr = min(*min_odr, sensor->hwfifo_odr_mHz);
 	}
 }
 
 static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr)
 {
-	u8 sip = sensor->odr / min_odr;
+	u8 sip = sensor->hwfifo_odr_mHz / min_odr;
 
 	return sip > 1 ? round_down(sip, 2) : sip;
 }
@@ -231,7 +232,7 @@ static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
 		if (enable) {
 			int err;
 
-			err = st_lsm6dsx_check_odr(sensor, sensor->odr,
+			err = st_lsm6dsx_check_odr(sensor, sensor->hwfifo_odr_mHz,
 						   &data);
 			if (err < 0)
 				return err;
@@ -713,7 +714,7 @@ st_lsm6dsx_update_samples_to_discard(struct st_lsm6dsx_sensor *sensor)
 
 	data = &hw->settings->samples_to_discard[sensor->id];
 	for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) {
-		if (data->val[i].milli_hz == sensor->odr) {
+		if (data->val[i].milli_hz == sensor->hwfifo_odr_mHz) {
 			sensor->samples_to_discard = data->val[i].samples;
 			return;
 		}

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = { · line 807

Quoted 8 lines
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +5 -0
@@ -799,6 +800,59 @@ static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
 	.postdisable = st_lsm6dsx_buffer_postdisable,
 };
 
+static ssize_t st_lsm6dsx_hwfifo_odr_show(struct device *dev,
+					  struct device_attribute *attr, char *buf)
+{
+	struct st_lsm6dsx_sensor *sensor = iio_priv(dev_to_iio_dev(dev));
+	u32 hwfifo_odr = sensor->hwfifo_odr_mHz;

nit: you can rid of this hwfifo_odr variable here and use sensor->hwfifo_odr_mHz directly.

Quoted 68 lines
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c +51 -2
+
+	return sysfs_emit(buf, "%d.%03d\n", hwfifo_odr / 1000, hwfifo_odr % 1000);
+}
+
+static ssize_t st_lsm6dsx_hwfifo_odr_store(struct device *dev,
+					   struct device_attribute *attr,
+					   const char *buf, size_t len)
+{
+	struct iio_dev *iio_dev = dev_to_iio_dev(dev);
+	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
+	int integer, milli;
+	int ret;
+	u32 hwfifo_odr;
+	u8 data;
+
+	if (!iio_device_claim_direct(iio_dev))
+		return -EBUSY;
+
+	ret = iio_str_to_fixpoint(buf, 100, &integer, &milli);
+	if (ret)
+		goto out;
+
+	hwfifo_odr = integer * 1000 + milli;
+	ret = st_lsm6dsx_check_odr(sensor, hwfifo_odr, &data);
+	if (ret < 0)
+		goto out;
+
+	hwfifo_odr = ret;
+
+	/* the batch data rate must not exceed the sensor output data rate */
+	if (hwfifo_odr <= sensor->odr)
+		sensor->hwfifo_odr_mHz = hwfifo_odr;
+	else
+		ret = -EINVAL;
+
+out:
+	iio_device_release_direct(iio_dev);
+
+	return ret < 0 ? ret : len;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(0664, st_lsm6dsx_hwfifo_odr_show, st_lsm6dsx_hwfifo_odr_store);
+
+static const struct iio_dev_attr *st_lsm6dsx_buffer_attrs[] = {
+	&iio_dev_attr_sampling_frequency,
+	NULL
+};
+
 int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
 {
 	int i, ret;
@@ -807,8 +861,9 @@ int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
 		if (!hw->iio_devs[i])
 			continue;
 
-		ret = devm_iio_kfifo_buffer_setup(hw->dev, hw->iio_devs[i],
-						  &st_lsm6dsx_buffer_ops);
+		ret = devm_iio_kfifo_buffer_setup_ext(hw->dev, hw->iio_devs[i],
+						      &st_lsm6dsx_buffer_ops,
+						      st_lsm6dsx_buffer_attrs);
 		if (ret)
 			return ret;
 	}
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +0 -0
index c65ad49829e7..055424303a4f 100644

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev, · line 1853

Quoted 5 lines
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +1 -1
@@ -1850,7 +1850,7 @@ static int st_lsm6dsx_write_raw(struct iio_dev *iio_dev,
 		if (val < 0)
 			err = val;
 		else
-			sensor->odr = val;
+			sensor->odr = sensor->hwfifo_odr_mHz = val;

please avoid multi-assignment here.

Quoted 16 lines
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c +1 -0
 		break;
 	}
 	default:
@@ -2384,6 +2384,7 @@ static struct iio_dev *st_lsm6dsx_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	sensor->id = id;
 	sensor->hw = hw;
 	sensor->odr = hw->settings->odr_table[id].odr_avl[0].milli_hz;
+	sensor->hwfifo_odr_mHz = sensor->odr;
 	sensor->gain = hw->settings->fs_table[id].fs_avl[0].gain;
 	sensor->watermark = 1;
 
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +0 -0
index 3c5e65dc0f97..039f588ef806 100644

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c __st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev, · line 642

Quoted 5 lines
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +1 -1
@@ -639,7 +639,7 @@ __st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev,
 			return odr;
 
 		sensor->ext_info.slv_odr = val;
-		sensor->odr = odr;
+		sensor->odr = sensor->hwfifo_odr_mHz = odr;

same here, one assignment per line.

Quoted 14 lines
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c +1 -0
 		return 0;
 	}
 	case IIO_CHAN_INFO_SCALE:
@@ -746,6 +746,7 @@ st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw,
 	sensor->id = id;
 	sensor->hw = hw;
 	sensor->odr = hw->settings->odr_table[ref_id].odr_avl[0].milli_hz;
+	sensor->hwfifo_odr_mHz = sensor->odr;
 	sensor->ext_info.slv_odr = info->odr_table.odr_avl[0].milli_hz;
 	sensor->gain = info->fs_table.fs_avl[0].gain;
 	sensor->ext_info.settings = info;
Signature · 1 line
2.39.5