FAILED: patch "[PATCH] arm64: dts: qcom: sdm845: Fix slimbam num-channels/ees" failed to apply to 5.10-stable tree

The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.10.y
git checkout FETCH_HEAD
git cherry-pick -x 316294bb6695a43a9181973ecd4e6fb3e576a9f7
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025101653-armory-oxygen-af78@gregkh' --subject-prefix 'PATCH 5.10.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 316294bb6695a43a9181973ecd4e6fb3e576a9f7 Mon Sep 17 00:00:00 2001
From: Stephan Gerhold <[email protected]>
Date: Thu, 21 Aug 2025 10:15:09 +0200
Subject: [PATCH] arm64: dts: qcom: sdm845: Fix slimbam num-channels/ees

Reading the hardware registers of the &slimbam on RB3 reveals that the BAM supports only 23 pipes (channels) and supports 4 EEs instead of 2. This hasn't caused problems so far since nothing is using the extra channels, but attempting to use them would lead to crashes.

The bam_dma driver might warn in the future if the num-channels in the DT are wrong, so correct the properties in the DT to avoid future regressions.

index 828b55cb6baf..02536114edb8 100644
@@ -5396,11 +5396,11 @@ slimbam: dma-controller@17184000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			qcom,controlled-remotely;
 			reg = <0 0x17184000 0 0x2a000>;
-			num-channels = <31>;
+			num-channels = <23>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,num-ees = <2>;
+			qcom,num-ees = <4>;
 			iommus = <&apps_smmu 0x1806 0x0>;
 		};
 

From: Stephan Gerhold <[email protected]>

[ Upstream commit 316294bb6695a43a9181973ecd4e6fb3e576a9f7 ]

Reading the hardware registers of the &slimbam on RB3 reveals that the BAM supports only 23 pipes (channels) and supports 4 EEs instead of 2. This hasn't caused problems so far since nothing is using the extra channels, but attempting to use them would lead to crashes.

The bam_dma driver might warn in the future if the num-channels in the DT are wrong, so correct the properties in the DT to avoid future regressions.

---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

index da48ae60155af..4422392fb60e0 100644
@@ -4492,11 +4492,11 @@ slimbam: dma@17184000 {
 			compatible = "qcom,bam-v1.7.0";
 			qcom,controlled-remotely;
 			reg = <0 0x17184000 0 0x2a000>;
-			num-channels  = <31>;
+			num-channels = <23>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,num-ees = <2>;
+			qcom,num-ees = <4>;
 			iommus = <&apps_smmu 0x1806 0x0>;
 		};
 

2.51.0